Ultra-stable all-solid-state sodium metal batteries enabled by perfluoropolyether-based electrolytes

Rationally Integrating 2D Confinement and High Sodiophilicity toward SnO2 /Ti3 C2 Tx Composites for High-Performance Sodium-Metal Anodes

The metallic sodium (Na) is characterized by high theoretical specific capacity, low electrode potential and abundant resources, and its advantages manifests itself as a promising candidate anode of sodium metal batteries (SMBs). However, the vaporization during the plating/stripping or uncontrolled growth of sodium dendrites in sodium metal anodes (SMAs) has posed major challenges to its practical applications. To address this issue, here, the SnO₂ /Ti₃ C₂ T_x composite is rationally fabricated, in which sodiophilic SnO₂ nanoparticles are in situ dispersed on the 2D Ti₃ C₂ T_x , providing the acceptor sites of Na⁺  that can control vaporization and dendrites. The SnO₂ /Ti₃ C₂ T_x composite anode exhibits smooth and homogeneous morphology after Na-metal deposition cycles, stable Coulombic efficiency (CE) of half cells, long stable cycles of symmetric cells due to highly sodiophilic sites, and confinement effect. In addition, the full cells assembled with Na_0.6 MnO₂ also show excellent rate performance and cycling performance. These discoveries demonstrate the effectiveness of the acceptor sites and the confinement effect provided by the SnO₂ /Ti₃ C₂ T_x composite, and thus provide an additional degree of freedom for designing SMBs.

Durable and Adjustable Interfacial Engineering of Polymeric Electrolytes for Both Stable Ni-Rich Cathodes and High-Energy Metal Anodes

Achieving stable cycling of high-voltage solid-state lithium metal batteries is crucial for next-generation rechargeable batteries with high energy density and high safety. However, the complicated interface problems in both cathode/anode electrodes preclude their practical applications hitherto. Herein, to simultaneously solve such interfacial limitations and obtain sufficient Li⁺ conductivity in the electrolyte, an ultrathin and adjustable interface is developed at the cathode side through a convenient surface in situ polymerization (SIP), achieving a durable high-voltage tolerance and Li-dendrite inhibition. The integrated interfacial engineering fabricates a homogeneous solid electrolyte with optimized interfacial interactions that contributes to tame the interfacial compatibility between LiNi_x Co_y Mn_z O₂ and polymeric electrolyte accompanied by anticorrosion of aluminum current collector. Further, the SIP enables a uniform adjustment of solid electrolyte composition by dissolving additives such as Na⁺ and K⁺ salts, which presents prominent cyclability in symmetric Li cells (>300 cycles at 5 mA cm^-2 ). The assembled LiNi_0.8 Co_0.1 Mn_0.1 O₂ (4.3 V)||Li batteries show excellent cycle life with high Coulombic efficiencies (>99%). This SIP strategy is also investigated and verified in sodium metal batteries. It opens a new frontier for solid electrolytes toward high-voltage and high-energy metal battery technologies.

Designing Solvated Double-Layer Polymer Electrolytes with Molecular Interactions Mediated Stable Interfaces for Sodium Ion Batteries

Unstable cathode-electrolyte and/or anode-electrolyte interface in polymer-based sodium-ion batteries (SIBs) will deteriorate their cycle performance. Herein, a unique solvated double-layer quasi-solid polymer electrolyte (SDL-QSPE) with high Na⁺ ion conductivity is designed to simultaneously improve stability on both cathode and anode sides. Different functional fillers are solvated with plasticizers to improve Na⁺ conductivity and thermal stability. The SDL-QSPE is laminated by cathode- and anode-facing polymer electrolyte to meet the independent interfacial requirements of the two electrodes. The interfacial evolution is elucidated by theoretical calculations and 3D X-ray microtomography analysis. The Na_0.67 Mn_2/3 Ni_1/3 O₂ |SDL-QSPE|Na batteries exhibit 80.4 mAh g^-1 after 400 cycles at 1 C with the Coulombic efficiency close to 100 %, which significantly outperforms those batteries using the monolayer-structured QSPE.

Highly Damping and Self-Healable Ionic Elastomer from Dynamic Phase Separation of Sticky Fluorinated Polymers

Shock-induced low-frequency vibration damage is extremely harmful to bionic soft robots and machines that may incur the malfunction of fragile electronic elements. However, current skin-like self-healable ionic elastomers as the artificial sensing and protecting layer still lack the ability to dampen vibrations, due to their almost opposite design for molecular frictions to material's elasticity. Inspired by the two-phase structure of adipose tissue (the natural damping skin layer), here, a highly damping ionic elastomer with energy-dissipating nanophases embedded in an elastic matrix is introduced, which is formed by polymerization-induced dynamic phase separation of sticky fluorinated copolymers in the presence of lithium salts. Such a supramolecular design decouples the elastic and damping functions into two distinct phases, and thus reconciles a few intriguing properties including ionic conductivity, high stretchability, softness, strain-stiffening, elastic recovery, room-temperature self-healability, recyclability, and most importantly, record-high damping capacity at the human motion frequency range (loss factor tan δ > 1 at 0.1-50 Hz). This study opens the door for the artificial syntheses of high-performance damping ionic skins with robust sensing and protective applications in soft electronics and robotics.

One-Step In Situ Polymerization: A Facile Design Strategy for Block Copolymer Electrolytes

To optimize the rapid transport of lithium ions (Li⁺ ) inside lithium metal batteries (LMBs), block copolymer electrolytes (BCPEs) have been fabricated in situ in LMBs via a one-step method combining reversible addition-fragmentation chain transfer (RAFT) polymerization and carboxylic acid-catalyzed ring-opening polymerization (ROP). The BCPEs balanced the Li⁺ coordination characteristics of the polyether- and polyester-based electrolytes to achieve a rapid Li⁺ migration in the SPEs. The carboxylic acid played a dual role since it both catalyzed the ROP and stabilized the interface. Furthermore, the in situ assembly of LMBs did effectively enable an efficient intercalation/de-intercalation of Li⁺ at the electrode/electrolyte interface. The in situ assembled Li/BCPE4/LFP exhibited high-capacity retention of 92 % after 400 cycles at 1 C. The one-step in situ fabrication of BCPEs provides a new direction for the design of polymer electrolytes.

Polyzwitterion-SiO2 Double-Network Polymer Electrolyte with High Strength and High Ionic Conductivity

The key to developing high-performance polymer electrolytes (PEs) is to achieve their high strength and high ionic conductivity, but this is still challenging. Herein, we designed a new double-network PE based on the nonhydrolytic sol-gel reaction of tetraethyl orthosilicate and in situ polymerization of zwitterions. The as-prepared PE possesses high strength (0.75 Mpa) and high stretchability (560%) due to the efficient dissipation energy of the inorganic network and elastic characteristics of the polymer network. In addition, the highest ionic conductivity of the PE reaches 0.44 mS cm-1 at 30 °C owning to the construction of dynamic ion channels between the polyzwitterion segments and between the polyzwitterion segments and ionic liquids. Furthermore, the inorganic network can act as Lewis acid to adsorb trace impurities, resulting in a prepared electrolyte with a high electrochemical window over 5 V. The excellent interface compatibility of the as-prepared PE with a Li metal electrode is also confirmed. Our work provides new insights into the design and preparation of high-performance polymer-based electrolytes for solid-state energy storage devices.

Highly Oxidation-Resistant Electrolyte for 4.7 V Sodium Metal Batteries Enabled by Anion/Cation Solvation Engineering

Sodium metal batteries (SMBs) are considered as promising battery system due to abundant Na sources. However, poor compatibility between electrolyte and cathode severely impedes its development. Herein, we proposed an anion/cation solvation strategy for realizing 4.7 V resistant SMBs electrolyte with NaClO₄ and trimethoxy(pentafluorophenyl)silane (TPFS) as dual additives (DA). The ClO₄ ^- can rapidly transfer to the cathode surface and strongly coordinate with Na⁺ to form stable polymer-like chains with solvents. Meanwhile, TPFS can preferentially enter into the PF₆ ^- anion solvation sheath for reducing PF₆ -solvent interaction and effectively scavenge adverse electrolyte species for protecting electrode electrolyte interphases. Thus, such electrolyte elevates the oxidative stability of carbonate electrolytes from 3.77 to 4.75 V, and enables Na||Na₃ V₂ (PO₄ )₂ O₂ F (NVPF) battery with a capacity retention of 93 % and an average Coulombic efficiency (CE) of 99.6 % after 500 cycles at 4.7 V.

Phase behavior of binary and ternary fluoropolymer (PVDF-HFP) solutions for single-ion conductors

A fluoropolymer poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) has a dielectric constant of ∼11, providing charge screening effects. Hence, this highly polar PVDF-HFP material has been employed as a matrix for solid polymer electrolytes (SPEs). In this study, the phase behavior of binary PVDF-HFP solutions was analyzed using the Flory-Huggins theory, in which ethylene carbonate, propylene carbonate, dimethyl carbonate, γ-butyrolactone, and acetone were employed as model solvents. In particular, for the binary PVDF-HFP/acetone system, the solid-liquid and liquid-liquid phase transitions were qualitatively described. Then, the phase diagram for ternary acetone/PVDF-HFP/polyphenolate systems was constructed, in which the binodal, spinodal, tie-line, and critical point were included. Finally, when a polyelectrolyte lithium polyphenolate was mixed with the PVDF-HFP matrix, it formed a single-ion conductor with a Li⁺ transference number of 0.8 at 23 °C. In the case of ionic conductivity, it was ∼10^-5 S cm^-1 in solid state and ∼10^-4 S cm^-1 in gel state, respectively.