Cellular fluidics

Perspective on fluorescence cell imaging with ionophore-based ion-selective nano-optodes

Inorganic ions are ubiquitous in all kinds of cells with highly dynamic spatial and temporal distribution. Taking advantage of different types of fluorescent probes, fluorescence microscopic imaging and quantitative analysis of ion concentrations in cells have rapidly advanced. A family of fluorescent nanoprobes based on ionophores has emerged in recent years with the potential to establish a unique platform for the analysis of common biological ions including Na⁺, K⁺, Ca²⁺, Cl^-, and so on. This article aims at providing a retrospect and outlook of ionophore-based ion-selective nanoprobes and the applications in cell imaging.

Triplet-Triplet Annihilation Photopolymerization for High-Resolution 3D Printing

Two-photon polymerization (TPP) currently offers the highest resolution available in 3D printing (∼100 nm) but requires femtosecond laser pulses at very high peak intensity (∼1 TW/cm²). Here, we demonstrate 3D printing based on triplet-triplet-annihilation photopolymerization (TTAP), which achieves submicron resolution while using a continuous visible LED light source with comparatively low light intensity (∼10 W/cm²). TTAP enables submicrometer feature sizes with exposure times of ∼0.1 s/voxel without requiring a coherent or pulsed light source, opening the door to low-cost fabrication with submicron resolution. This approach enables 3D printing of a diverse array of designs with high resolution and is amenable to future parallelization efforts.

Underwater Unidirectional Cellular Fluidics

The unidirectional fluidics underwater promises the manipulation of gas/liquid for various significant applications. Inspired by the unique stomata on the surface of hornwort stems and leaves that enable the transport and storage of oxygen underwater, we propose a bionic cell with porous membranes fabricated by the projection microstereolithography based 3D printing technique. Different Laplace forces coming from different contact angles for the respectively superhydrophilic outside and hydrophobic inside promise unidirectional fluidic performance, which stop water flowing inside of the bionic cell while exhausting gas and liquid outside of it. In addition, geometric parameters of the bionic cell make a big difference in its unique unidirectional fluidic performance. Simultaneously, the underlying mechanisms of the unidirectional penetration of liquid in our 3D printed bionic cell are theoretically revealed. Moreover, we demonstrate potential applications of our bionic cell with underwater anaerobic chemical reactions to fully apply its outstanding unidirectional fluidics underwater. Our bionic cell opens a gate for potential applications in chemical and microfluidic engineering underwater, such as the storage of flammable materials, fast solid-liquid separations, and anaerobic chemical reactions.

Nanolayer Laser Absorber for Femtoliter Chemistry in Polymer Reactors

Laser-induced forward transfer (LIFT) has the potential to be an alternative approach to atomic force microscopy based scanning probe lithography techniques, which have limitations in high-speed and large-scale patterning. However, traditional donor slides limit the resolution and chemical flexibility of LIFT. Here, a hematite nanolayer absorber for donor slides to achieve high-resolution transfers down to sub-femtoliters is proposed. Being wettable by both aqueous and organic solvents, this new donor significantly increases the chemical scope for the LIFT process. For parallel amino acid coupling reactions, the patterning resolution can now be increased more than five times (>111 000 spots cm^{- 2} for hematite donor vs 20 000 spots cm^{- 2} for standard polyimide donor) with even faster scanning (2 vs 6 ms per spot). Due to the increased chemical flexibility, other types of reactions inside ultrasmall polymer reactors: copper (I) catalyzed click chemistry and laser-driven oxidation of a tetrahydroisoquinoline derivative, suggesting the potential of LIFT for both deposition of chemicals, and laser-driven photochemical synthesis in femtoliters within milliseconds can be explored. Since the hematite shows no damage after typical laser transfer, donors can be regenerated by heat treatment. These findings will transform the LIFT process into an automatable, precise, and highly efficient technology for high-throughput femtoliter chemistry.

Microfluidics for Electrochemical Energy Conversion

Electrochemical energy conversion is an important supplement for storage and on-demand use of renewable energy. In this regard, microfluidics offers prospects to raise the efficiency and rate of electrochemical energy conversion through enhanced mass transport, flexible cell design, and ability to eliminate the physical ion-exchange membrane, an essential yet costly element in conventional electrochemical cells. Since the 2002 invention of the microfluidic fuel cell, the research field of microfluidics for electrochemical energy conversion has expanded into a great variety of cell designs, fabrication techniques, and device functions with a wide range of utility and applications. The present review aims to comprehensively synthesize the best practices in this field over the past 20 years. The underlying fundamentals and research methods are first summarized, followed by a complete assessment of all research contributions wherein microfluidics was proactively utilized to facilitate energy conversion in conjunction with electrochemical cells, such as fuel cells, flow batteries, electrolysis cells, hybrid cells, and photoelectrochemical cells. Moreover, emerging technologies and analytical tools enabled by microfluidics are also discussed. Lastly, opportunities for future research directions and technology advances are proposed.

A low-cost and high-performance 3D micromixer over a wide working range and its application for high-sensitivity biomarker detection

Homogenous mixing in microfluidic devices is often required for efficient chemical and biological reactions.Passive micromixing without external energy input has attracted much research interest. We have developed a high-performance 3D...

3D Printed, Solid-State Conductive Ionoelastomer as a Generic Building Block for Tactile Applications

Shaping soft and conductive materials into preferential architectures via 3D printing is highly attractive for numerous applications ranging from tactile devices to bioelectronics. A landmark type of soft and conductive materials is hydrogels/ionogels. However, 3D-printed hydrogels/ionogels still suffer from a fundamental bottleneck: limited stability in their electrical-mechanical properties caused by the evaporation and leakage of liquid within hydrogels/ionogels. Although photocurable liquid-free ion-conducting elastomers can circumvent these limitations, the associated photocurable process is cumbersome and hence the printing quality is relatively poor. Herein, a fast photocurable, solid-state conductive ionoelastomer (SCIE) is developed that enables high-resolution 3D printing of arbitrary architectures. The printed building blocks possess many promising features over the conventional ion-conducting materials, including high resolution architectures (even ≈50 µm overhanging lattices), good Young's modulus (up to ≈6.2 MPa), and stretchability (fracture strain of ≈292%), excellent conductivity tolerance in a wide range of temperatures (from -30 to 80 °C), as well as fine elasticity and antifatigue ability even after 10 000 loading-unloading cycles. It is further demonstrated that the printed building blocks can be programmed into 3D flexible tactile sensors such as gyroid-based piezoresistive sensor and gap-based capacitive sensor, both of which exhibit several times higher in sensitivity than their bulky counterparts.

Fabrication of Nanoscale Gas-Liquid Interfaces in Hydrophilic/Hydrophobic Nanopatterned Nanofluidic Channels

Gas-liquid interfaces (GLIs) are ubiquitous and have found widespread applications in a large variety of fields. Despite the recent trend of downscaling GLIs, their nanoscale fabrication remains challenging because of the lack of suitable tools. In this study, a nanofluidic device, which has undergone precise local surface modification, is used in combination with tailored physicochemical effects in nanospace and optimized nanofluidic operations, to produce uniform, arrayable, stable, and transportable nanoscale GLIs that can concentrate molecules of interest at the nanoscale. This approach provides a delicate nanofluidic mechanism for downscaling gas-liquid interfaces to the nanometer scale, thus opening up a new avenue for gas-liquid interface studies and applications.

Scalable 3D-printed lattices for pressure control in fluid applications

Additive manufacturing affords precise control over geometries with high degrees of complexity and pre-defined structure. Lattices are one class of additive-only structures which have great potential in directing transport phenomena because they are highly ordered, scalable, and modular. However, a comprehensive description of how these structures scale and interact in heterogeneous systems is still undetermined. To advance this aim, we designed cubic and Kelvin lattices at two sub-5 mm length scales and compared published correlations to the experimental pressure gradient in pipes ranging from 12-52 mm diameter. We further investigated all combinations of the four lattices to evaluate segmented combinatorial behavior. The results suggest that a single correlation can describe pressure behavior for different lattice geometries and scales. Furthermore, combining lattice systems in series has a complex effect that is sensitive to part geometry. Together, these developments support the promise for tailored, modular lattice systems at laboratory scales and beyond.

Materials Chemistry of Neural Interface Technologies and Recent Advances in Three-Dimensional Systems

Advances in materials chemistry and engineering serve as the basis for multifunctional neural interfaces that span length scales from individual neurons to neural networks, neural tissues, and complete neural systems. Such technologies exploit electrical, electrochemical, optical, and/or pharmacological modalities in sensing and neuromodulation for fundamental studies in neuroscience research, with additional potential to serve as routes for monitoring and treating neurodegenerative diseases and for rehabilitating patients. This review summarizes the essential role of chemistry in this field of research, with an emphasis on recently published results and developing trends. The focus is on enabling materials in diverse device constructs, including their latest utilization in 3D bioelectronic frameworks formed by 3D printing, self-folding, and mechanically guided assembly. A concluding section highlights key challenges and future directions.