Increasing silk fibre strength through heterogeneity of bundled fibrils

Can naturally arising disorder in biological materials be beneficial? Materials scientists are continuously attempting to replicate the exemplary performance of materials such as spider silk, with detailed techniques and assembly procedures. At the same time, a spider does not precisely machine silk-imaging indicates that its fibrils are heterogeneous and irregular in cross section. While past investigations either focused on the building material (e.g. the molecular scale protein sequence and behaviour) or on the ultimate structural component (e.g. silk threads and spider webs), the bundled structure of fibrils that compose spider threads has been frequently overlooked. Herein, I exploit a molecular dynamics-based coarse-grain model to construct a fully three-dimensional fibril bundle, with a length on the order of micrometres. I probe the mechanical behaviour of bundled silk fibrils with variable density of heterogenic protrusions or globules, ranging from ideally homogeneous to a saturated distribution. Subject to stretching, the model indicates that cooperativity is enhanced by contact through low-force deformation and shear 'locking' between globules, increasing shear stress transfer by up to 200 per cent. In effect, introduction of a random and disordered structure can serve to improve mechanical performance. Moreover, addition of globules allows a tuning of free volume, and thus the wettability of silk (with implications for supercontraction). These findings support the ability of silk to maintain near-molecular-level strength at the scale of silk threads, and the mechanism could be easily adopted as a strategy for synthetic fibres.

Silk fibroin biomaterials for tissue regenerations

Regeneration of tissues using cells, scaffolds and appropriate growth factors is a key approach in the treatments of tissue or organ failure. Silk protein fibroin can be effectively used as a scaffolding material in these treatments. Silk fibers are obtained from diverse sources such as spiders, silkworms, scorpions, mites and flies. Among them, silk of silkworms is a good source for the development of biomedical device. It possesses good biocompatibility, suitable mechanical properties and is produced in bulk in the textile sector. The unique combination of elasticity and strength along with mammalian cell compatibility makes silk fibroin an attractive material for tissue engineering. The present article discusses the processing of silk fibroin into different forms of biomaterials followed by their uses in regeneration of different tissues. Applications of silk for engineering of bone, vascular, neural, skin, cartilage, ligaments, tendons, cardiac, ocular, and bladder tissues are discussed. The advantages and limitations of silk systems as scaffolding materials in the context of biocompatibility, biodegradability and tissue specific requirements are also critically reviewed.

Blending of Cellulose and Chitosan in Alkyl Imidazolium Ionic Liquids

The production of cellulose/chitosan blends in alkyl imidazolium ionic liquids (ILs) was studied in this work. Selected organic solvents, such as dimethyl sulfoxide, ethyl acetate, and diethyl ether, were used as cosolvents. The addition of cosolvents decreased the viscosity of cellulose/chitosan solutions in ILs and facilitated the dissolution of polysaccharides, thereby decreasing the and polymer aggregates sizes in the solutions. The cellulose/chitosan films were produced from the studied solutions. The presence of one of cosolvent and ILs in the blended films was confirmed by FTIR spectroscopy. The blended film is stronger than pure cellulose film, and the addition of cosolvents has an influence on its mechanical properties.

A review of combined experimental and computational procedures for assessing biopolymer structure-process-property relationships

Tailored biomaterials with tunable functional properties are desirable for many applications ranging from drug delivery to regenerative medicine. To improve the predictability of biopolymer materials functionality, multiple design parameters need to be considered, along with appropriate models. In this article we review the state of the art of synthesis and processing related to the design of biopolymers, with an emphasis on the integration of bottom-up computational modeling in the design process. We consider three prominent examples of well-studied biopolymer materials - elastin, silk, and collagen - and assess their hierarchical structure, intriguing functional properties and categorize existing approaches to study these materials. We find that an integrated design approach in which both experiments and computational modeling are used has rarely been applied for these materials due to difficulties in relating insights gained on different length- and time-scales. In this context, multiscale engineering offers a powerful means to accelerate the biomaterials design process for the development of tailored materials that suit the needs posed by the various applications. The combined use of experimental and computational tools has a very broad applicability not only in the field of biopolymers, but can be exploited to tailor the properties of other polymers and composite materials in general.

Dissolution and regeneration of collagen fibers using ionic liquid

Native skin collagen fibers were successfully dissolved in the ionic liquid, 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), and regenerated in different precipitators. The observation by polarized optical microscopy showed that the crystal structure of collagen fibers had been destroyed by [BMIM]Cl during the heating. Temperature-dependent FTIR was applied to detect the structural change of collagen/[BMIM]Cl during dissolving. The structure of regenerated collagen was characterized by FTIR and XRD. It showed that the triple helical structure of collagen had been partly destroyed during the dissolution and regeneration. The film forming ability and the thermostability of the regenerated collagen was highly dependent on the precipitating treatment. The possible mechanisms of dissolving of collagen in [BMIM]Cl and the regeneration in the precipitators have been proposed. The collagen/cellulose composite with different forms (film, fiber, gel) can be successfully prepared by using [BMIM]Cl as medium.

Tunable silk: using microfluidics to fabricate silk fibers with controllable properties

Despite widespread use of silk, it remains a significant challenge to fabricate fibers with properties similar to native silk. It has recently been recognized that the key to tuning silk fiber properties lies in controlling internal structure of assembled β-sheets. We report an advance in the precise control of silk fiber formation with control of properties via microfluidic solution spinning. We use an experimental approach combined with modeling to accurately predict and independently tune fiber properties including Young's modulus and diameter to customize fibers. This is the first reported microfluidic approach capable of fabricating functional fibers with predictable properties and provides new insight into the structural transformations responsible for the unique properties of silk. Unlike bulk processes, our method facilitates the rapid and inexpensive fabrication of fibers from small volumes (50 μL) that can be characterized to investigate sequence-structure-property relationships to optimize recombinant silk technology to match and exceed natural silk properties.

New frontiers in materials science opened by ionic liquids

Ionic liquids (ILs) including ambient-temperature molten salts, which exist in the liquid state even at room temperature, have a long research history. However, their applications were once limited because ILs were considered as highly moisture-sensitive solvents that should be handled in a glove box. After the first synthesis of moisture-stable ILs in 1992, their unique physicochemical properties became known in all scientific fields. ILs are composed solely of ions and exhibit several specific liquid-like properties, e.g., some ILs enable dissolution of insoluble bio-related materials and the use as tailor-made lubricants in industrial applications under extreme physicochemical conditions. Hybridization of ILs and other materials provides quasi-solid materials, which can be used to fabricate highly functional devices. ILs are also used as reaction media for electrochemical and chemical synthesis of nanomaterials. In addition, the negligible vapor pressure of ILs allows the fabrication of electrochemical devices that are operated under ambient conditions, and many liquid-vacuum technologies, such as X-ray photoelectron spectroscopy (XPS) analysis of liquids, electron microscopy of liquids, and sputtering and physical vapor deposition onto liquids. In this article, we review recent studies on ILs that are employed as functional advanced materials, advanced mediums for materials production, and components for preparing highly functional materials.

Gel spinning of silk tubes for tissue engineering

Tubular vessels for tissue engineering are typically fabricated using a molding, dipping, or electrospinning technique. While these techniques provide some control over inner and outer diameters of the tube, they lack the ability to align the polymers or fibers of interest throughout the tube. This is an important aspect of biomaterial composite structure and function for mechanical and biological impact of tissue outcomes. We present a novel aqueous process system to spin tubes from biopolymers and proteins such as silk fibroin. Using silk as an example, this method of winding an aqueous solution around a reciprocating rotating mandrel offers substantial improvement in the control of the tube properties, specifically with regard to winding pattern, tube porosity, and composite features. Silk tube properties are further controlled via different post-spinning processing mechanisms such as methanol treatment, air-drying, and lyophilization. This approach to tubular scaffold manufacture offers numerous tissue engineering applications such as complex composite biomaterial matrices, blood vessel grafts and nerve guides, among others.

Thorough chemical modification of wood-based lignocellulosic materials in ionic liquids

Homogenous acylation and carbanilation reactions of wood-based lignocellulosic materials have been investigated in ionic liquids. We have found that highly substituted lignocellulosic esters can be obtained under mild conditions (2 h, 70 degrees C) by reacting wood dissolved in ionic liquids with acetyl chloride, benzoyl chloride, and acetic anhydride in the presence of pyridine. In the absence of pyridine, extensive degradation of the wood components was found to occur. Highly substituted carbanilated lignocellulosic material was also obtained in the absence of base in ionic liquid. These chemical modifications were confirmed by infrared spectroscopy, (1)H NMR, and quantitative (31)P NMR of the resulting derivatives. The latter technique permitted the degrees of substitution to be determined, which were found to vary between 81% and 95% for acetylation, benzoylation, and carbanilation, accompanied by similarly high gains in weight percent values. Thermogravimetric measurements showed that the resulting materials exhibit different thermal stabilities from those of the starting wood, while differential scanning calorimetry showed discrete new thermal transitions for these derivatives. Scanning electron microscopy showed the complete absence of fibrous characteristics for these derivatives, but instead, a homogeneous porous, powdery appearance was apparent. A number of our reactions were also carried out in completely recycled ionic liquids, verifying their utility for potential applications beyond the laboratory bench.

Correlation of the β-sheet crystal size in silk fibers with the protein amino acid sequence

Low voltage transmission electron microscopy (LVTEM) and wide angle X-ray scattering (WAXS) are used to independently determine the size of the β-sheet crystalline regions in Bombyx mori silk fibers. The peak in the size distributions of the major and minor axes of the anisotropic crystallites measured from the LVTEM images compare well with the average sizes as determined by Scherrer analysis of the X-ray fiber diagrams. These values are then discussed in the context of the B. mori fibroin heavy chain amino acid sequence, and the underlying mechanism for the organism's control on fiber crystallite size, and therefore mechanical properties, is proposed.

Spider silk as an active scaffold in the assembly of gold nanoparticles and application of the gold-silk bioconjugate in vapor sensing

Spider silk is being viewed with interest by materials scientists due to its excellent resilience and mechanical properties. In this paper we show that spider silk is an excellent scaffold for the one-step synthesis and assembly of gold nanoparticles. Formation of a gold nanoparticle-spider-silk bioconjugate material is accomplished by simple reaction of the fibers with aqueous chloroauric acid. The gold nanoparticles thus formed are strongly bound to the spider-silk fiber surface enabling study of the electrical properties of the nanobioconjugate. Using the well-known contraction/expansion behavior of the fibers in solvents of varying polarity, we show that exposure of the gold nanoparticle-spider silk bioconjugate to vapors of methanol and chloroform leads to changes in electrical transport through the nanoparticles and thus, the possibility of developing a vapor sensor. The bioconjugate shows excellent response time and cycling efficiency to methanol vapors. The activation energy of electron transport from one gold nanoparticle to another in the nanobiocojugate was determined from temperature-dependent electron-transport measurements to be approximately 1.7 eV.

Patterned silk films cast from ionic liquid solubilized fibroin as scaffolds for cell growth

Silk is an attractive biomaterial for use in tissue engineering applications because of its slow degradation, excellent mechanical properties, and biocompatibility. In this report, we demonstrate a simple method to cast patterned films directly from silk fibroin dissolved in an ionic liquid. The films cast from the silk ionic liquid solution were found to support normal cell proliferation and differentiation. The versatility of the silk ionic liquid solutions and the ability to process large amounts of silk into materials with controlled surface topography directly from the dissolved silk ionic liquid solution could enhance the desirability of biomaterials such as silk for a variety of applications.