51
|
Abstract
This review surveys selected methods of manufacture and applications of microdevices-miniaturized functional devices capable of handling cell and tissue cultures or producing particles-and discusses their potential relevance to nanomedicine. Many characteristics of microdevices such as miniaturization, increased throughput, and the ability to mimic organ-specific microenvironments are promising for the rapid, low-cost evaluation of the efficacy and toxicity of nanomaterials. Their potential to accurately reproduce the physiological environments that occur in vivo could reduce dependence on animal models in pharmacological testing. Technologies in microfabrications and microfluidics are widely applicable for nanomaterial synthesis and for the development of diagnostic devices. Although the use of microdevices in nanomedicine is still in its infancy, these technologies show promise for enhancing fundamental and applied research in nanomedicine.
Collapse
Affiliation(s)
- Michinao Hashimoto
- Laboratory for Biomaterials and Drug Delivery, Department of Anesthesiology, Division of Critical Care Medicine, Children's Hospital Boston, Harvard Medical School, Boston, MA 02115, USA
| | | | | |
Collapse
|
52
|
Li X, Tian H, Shao J, Ding Y, Liu H. Electrically modulated microtransfer molding for fabrication of micropillar arrays with spatially varying heights. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2013; 29:1351-1355. [PMID: 23347355 DOI: 10.1021/la304986e] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
The ability to generate a large area micropillar array with spatially varying heights allows for exploring numerous new interesting applications in biotechnology, surface engineering, microfluidics, and so forth. This Letter presents a clever and straightforward method, called electrically modulated microtransfer molding (EM3), for generating such unique microstructures from a silicon mold arrayed with microholes. The key to the process is an application of electrically tunable wettability caused by a spatially modulated voltage, which electrohydrodynamically drives a photocurable and dielectric prepolymer to fill the microholes to a depth depending on the voltage amplitude. Using EM3, micropillar arrays with stepwise or continuously varying heights are successfully fabricated, with the diameter scalable to 1.5 μm and with the maximum height being equal to the depth of the high-aspect-ratio (more than 10:1) microholes.
Collapse
Affiliation(s)
- Xiangming Li
- Micro- and Nano-manufacturing Research Center, State Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University, Xi'an, Shaanxi 710049, China
| | | | | | | | | |
Collapse
|
53
|
Peng Lee C, Hsin Chen Y, Hang Wei Z. Fabrication of hexagonally packed cell culture substrates using droplet formation in a T-shaped microfluidic junction. BIOMICROFLUIDICS 2013; 7:14101. [PMID: 24396524 PMCID: PMC3555912 DOI: 10.1063/1.4774315] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/01/2012] [Accepted: 12/17/2012] [Indexed: 05/14/2023]
Abstract
A method is here proposed to fabricate ordered hexagonally packed cell culture substrates with hexagonally arranged cell patterning areas. We generated photo-sensitive polymeric microdroplets in a T-shaped microfluidic junction by an immiscible liquid, and then solidified the collective self-assembled hexagonal droplet array to obtain the cell culture substrate, on which we took the grooves formed between the solidified droplets as the hexagonally arranged cell patterning areas. The most promising advantage of our method is that we can actively tune the droplet size by simply adopting different volumetric flow rates of the two immiscible fluids to form cell culture substrates with differently sized cell patterning areas. Besides, the examination results of the cell culture substrate's characteristics validate whether our method is capable of creating substrates with high spatial uniformity. To verify the cell patterning function of our cell culture substrates, we used the semi-adherent RAW cells to demonstrate the effectiveness of patterning of suspended/adherent cells before/after adhesion. Over 90% cell viability and cell patterning rate suggest that our method may be a promising approach for future applications of cell patterning on biochips.
Collapse
Affiliation(s)
- Chiun Peng Lee
- Department of Power Mechanical Engineering, National Tsing Hua University, Taiwan
| | - Yi Hsin Chen
- Department of Power Mechanical Engineering, National Tsing Hua University, Taiwan
| | - Zung Hang Wei
- Department of Power Mechanical Engineering, National Tsing Hua University, Taiwan
| |
Collapse
|
54
|
Tan H, Gao X, Sun J, Xiao C, Hu X. Double stimulus-induced stem cell aggregation during differentiation on a biopolymer hydrogel substrate. Chem Commun (Camb) 2013; 49:11554-6. [DOI: 10.1039/c3cc47101b] [Citation(s) in RCA: 27] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/27/2023]
|
55
|
Okochi M, Matsumura T, Yamamoto AS, Nakayama E, Jimbow K, Honda H. Cell behavior observation and gene expression analysis of melanoma associated with stromal fibroblasts in a three-dimensional magnetic cell culture array. Biotechnol Prog 2012; 29:135-42. [DOI: 10.1002/btpr.1642] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/21/2012] [Revised: 08/26/2012] [Indexed: 01/14/2023]
|
56
|
Ai X, Liang Q, Luo M, Zhang K, Pan J, Luo G. Controlling gas/liquid exchange using microfluidics for real-time monitoring of flagellar length in living Chlamydomonas at the single-cell level. LAB ON A CHIP 2012; 12:4516-22. [PMID: 22968631 DOI: 10.1039/c2lc40638a] [Citation(s) in RCA: 10] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/17/2023]
Abstract
Chlamydomonas reinhardtii is widely used for studying cilia/flagella, organelles important for human health and disease. In situ monitoring of flagellar assembly/disassembly kinetics in single living cells has been difficult with conventional methods because of time-consuming media exchange and the requirement of whole cell fixation. Here, we develop a PDMS/glass hybrid microfluidic device for real-time tracking of flagellar length in single living cells of Chlamydomonas. Media exchange is precisely controlled by sequential gas-liquid plugs and complete medium replacement occurs within seconds. Rapid medium exchange allows the capture of transient flagellar dynamics. We show that Chlamydomonas cells respond to acidic medium exchange and deflagellate. However, the two flagella may shed asynchronously. After subsequent medium exchange, cells regenerate full-length flagella. Cells are also induced to shorten their flagella after being exposed to extracellular stimuli. The long-term kinetics of flagellar regeneration and disassembly for the whole cell population on the chip are comparable to those from conventional methods; however, individual cells display non-uniform response kinetics. We also find that flagellar growth rate is dependent on flagellar length. This device provides a potential platform to continuously monitor molecular activities associated with changes in flagellar length and to capture transient molecular changes upon flagellar loss, and initiation of flagellar assembly/disassembly.
Collapse
Affiliation(s)
- Xiaoni Ai
- Beijing Key Laboratory for Microanalytical Methods and Instrumentation, Department of Chemistry, Tsinghua University, Beijing, 100084, China
| | | | | | | | | | | |
Collapse
|
57
|
Microscale methods to assemble mammalian cells into tissue-like structures. SCIENCE CHINA-LIFE SCIENCES 2012; 55:862-71. [DOI: 10.1007/s11427-012-4385-9] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/28/2012] [Accepted: 09/24/2012] [Indexed: 01/19/2023]
|
58
|
Okochi M, Matsumura T, Honda H. Magnetic force-based cell patterning for evaluation of the effect of stromal fibroblasts on invasive capacity in 3D cultures. Biosens Bioelectron 2012. [PMID: 23208102 DOI: 10.1016/j.bios.2012.09.067] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/25/2023]
Abstract
Biomimetic cell culture systems that recreate tumor microenvironments are necessary in understanding the progression of cancer cells in cell-to-cell interaction and in cell-to-extracellular matrix interaction. We have developed a three-dimensional spheroid array embedded in collagen for evaluation of the effect of stromal fibroblasts associated with cancer cells. When the breast epithelial cancer cell model MCF10A/myr-Akt1 was magnetically labeled and aligned in the array by an external magnetic force using a pin-holder device and a magnet, a stellate configuration was observed. Changes in MCF10A/myr-Akt1 cell behavior were only slight when normal human dermal fibroblasts (NHDF) cells coexisted in collagen (indirect-interaction array). In contrast, when NHDF were magnetically labeled and patterned together with MCF10A/myr-Akt1 (direct-interaction array), spreading and progression were observed along with NHDF. Cell image analysis indicated that the length and area were statistically significantly increased in the direct-interaction array compared to the MCF10A/myr-Akt1 alone or to the indirect-interaction array. A cell susceptibility assay was undertaken with breast cancer MDA-MB-231 associated with NHDF in the indirect-interaction array. Interestingly, although distinct suppression of cell movement and proliferation was observed with 100 μM of collagenase inhibitor, formation of invadepodia significantly increased with coexistent NHDF. Since cancer progression is influenced by its microenvironment, this magnetic cell-patterning method which clarifies direct and indirect effects of stromal cells on invasion and proliferation, is well suited for evaluation and design of more efficient approaches in cancer prevention and treatment.
Collapse
Affiliation(s)
- Mina Okochi
- Department of Biotechnology, School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan.
| | | | | |
Collapse
|
59
|
|
60
|
Lawrenz A, Nason F, Cooper-White JJ. Geometrical effects in microfluidic-based microarrays for rapid, efficient single-cell capture of mammalian stem cells and plant cells. BIOMICROFLUIDICS 2012; 6:24112-2411217. [PMID: 22655021 PMCID: PMC3360725 DOI: 10.1063/1.4704521] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/05/2012] [Accepted: 03/31/2012] [Indexed: 05/20/2023]
Abstract
In this paper, a detailed numerical and experimental investigation into the optimisation of hydrodynamic micro-trapping arrays for high-throughput capture of single polystyrene (PS) microparticles and three different types of live cells at trapping times of 30 min or less is described. Four different trap geometries (triangular, square, conical, and elliptical) were investigated within three different device generations, in which device architecture, channel geometry, inter-trap spacing, trap size, and trap density were varied. Numerical simulation confirmed that (1) the calculated device dimensions permitted partitioned flow between the main channel and the trap channel, and further, preferential flow through the trap channel in the absence of any obstruction; (2) different trap shapes, all having the same dimensional parameters in terms of depth, trapping channel lengths and widths, main channel lengths and widths, produce contrasting streamline plots and that the interaction of the fluid with the different geometries can produce areas of stagnated flow or distorted field lines; and (3) that once trapped, any motion of the trapped particle or cell or a shift in its configuration within the trap can result in significant increases in pressures on the cell surface and variations in the shear stress distribution across the cell's surface. Numerical outcomes were then validated experimentally in terms of the impact of these variations in device design elements on the percent occupancy of the trapping array (with one or more particles or cells) within these targeted short timeframes. Limitations on obtaining high trap occupancies in the devices were shown to be primarily a result of particle aggregation, channel clogging and the trap aperture size. These limitations could be overcome somewhat by optimisation of these device design elements and other operational variables, such as the average carrier fluid velocity. For example, for the 20 μm polystyrene microparticles, the number of filled traps increased from 32% to 42% during 5-10 min experiments in devices with smaller apertures. Similarly, a 40%-60% reduction in trapping channel size resulted in an increase in the amount of filled traps, from 0% to almost 90% in 10 min, for the human bone marrow derived mesenchymal stem cells, and 15%-85% in 15 min for the human embryonic stem cells. Last, a reduction of the average carrier fluid velocity by 50% resulted in an increase from 80% to 92% occupancy of single algae cells in traps. Interestingly, changes in the physical properties of the species being trapped also had a substantial impact, as regardless of the trap shape, higher percent occupancies were observed with cells compared to single PS microparticles in the same device, even though they are of approximately the same size. This investigation showed that in microfluidic single cell capture arrays, the trap shape that maximizes cell viability is not necessarily the most efficient for high-speed single cell capture. However, high-speed trapping configurations for delicate mammalian cells are possible but must be optimised for each cell type and designed principally in accordance with the trap size to cell size ratio.
Collapse
|
61
|
Xu Ping Zhang, Leung C, Zhe Lu, Esfandiari N, Casper RF, Yu Sun. Controlled Aspiration and Positioning of Biological Cells in a Micropipette. IEEE Trans Biomed Eng 2012; 59:1032-40. [DOI: 10.1109/tbme.2012.2182673] [Citation(s) in RCA: 49] [Impact Index Per Article: 4.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
|
62
|
Hong S, Pan Q, Lee LP. Single-cell level co-culture platform for intercellular communication. Integr Biol (Camb) 2012; 4:374-80. [PMID: 22434268 DOI: 10.1039/c2ib00166g] [Citation(s) in RCA: 86] [Impact Index Per Article: 7.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
A cell in vivo is part of a large, networked community. An individual cell's fate is strongly influenced by its interactions with neighbouring cells. While this interaction has been recognized as critical in determining cell behaviour, its complexity and heterogeneity has thus far defied characterization by currently available techniques. Herein, we present a single-cell level co-culture platform for studies of dynamic cellular interactions, which is capable of maintaining and tracking single-cell pair interactions to simplify the complexity of intercellular communication. In this platform, heterotypic pairing on a single-cell level is achieved through sequential cell trapping and dynamic variation of fluidic resistance. Individual culture chambers provide trapped cells enough space to migrate and proliferate through multiple generations. Furthermore, the semi-isolated chambers, combined with continuously refreshed medium supplement, allow a stable communication environment around the cells. To demonstrate the platform capability, we cultured and tracked stem cell-fibroblast pairs for several generations. The subsequent effects of cell-cell interactions were then easily observed, due to the addressability of each isolated chamber, and quantitatively characterized. Specifically, we found that paired cells' migration patterns were dependent on their initial distance from each other, and that heterotypic pairing led to distinct proliferation patterns from homotypic, single-cell culture. This study demonstrates the platform utility in providing a detailed and quantitative understanding of the complexity of cellular communication and its effects on cell behaviour in a variety of biological systems.
Collapse
Affiliation(s)
- Soongweon Hong
- Berkeley Sensor and Actuator Center, Department of Bioengineering, University of California at Berkeley, Berkeley, California 94720, USA
| | | | | |
Collapse
|
63
|
Şen M, Ino K, Shiku H, Matsue T. A new electrochemical assay method for gene expression using hela cells with a secreted alkaline phosphatase (SEAP) reporter system. Biotechnol Bioeng 2012; 109:2163-7. [DOI: 10.1002/bit.24461] [Citation(s) in RCA: 22] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/07/2011] [Revised: 01/11/2012] [Accepted: 01/23/2012] [Indexed: 12/31/2022]
|
64
|
Kauffmann P, Ith A, O'Brien D, Gaude V, Boué F, Combe S, Bruckert F, Schaack B, Dempsey NM, Haguet V, Reyne G. Diamagnetically trapped arrays of living cells above micromagnets. LAB ON A CHIP 2011; 11:3153-3161. [PMID: 21808772 DOI: 10.1039/c1lc20232d] [Citation(s) in RCA: 26] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/31/2023]
Abstract
Cell arrays are of foremost importance for many applications in pharmaceutical research or fundamental biology. Although arraying techniques have been widely investigated for adherent cells, organization of cells in suspension has been rarely considered. The arraying of non-adherent cells using the diamagnetic repulsive force is presented. A planar arrangement of Jurkat cells is achieved at the microscale above high quality microfabricated permanent magnets with remanent magnetization of J(r)≈ 1 T, in the presence of a paramagnetic contrast agent. The cytotoxicity of three Gd based contrast agents, Gd-DOTA, Gd-BOPTA and Gd-HP-DO3A, is studied. Among them, Gd-HP-DO3A appears to be the most biocompatible toward Jurkat cells. In close agreement with analytical simulations, diamagnetically 'suspended' cells have been successfully arrayed above square and honeycomb-like micromagnet arrays, which act as a "diamagnetophobic" surface. Living cell trapping is achieved in a simple manner using concentrations of Gd-HP-DO3A as low as 1.5 mM.
Collapse
Affiliation(s)
- Paul Kauffmann
- Grenoble Electrical Engineering Laboratory (G2Elab), UMR 5269 (Grenoble-INP, UJF, CNRS), BP 46, 38402, Saint Martin d'Hères Cedex, France.
| | | | | | | | | | | | | | | | | | | | | |
Collapse
|
65
|
Donolato M, Torti A, Kostesha N, Deryabina M, Sogne E, Vavassori P, Hansen MF, Bertacco R. Magnetic domain wall conduits for single cell applications. LAB ON A CHIP 2011; 11:2976-83. [PMID: 21779553 DOI: 10.1039/c1lc20300b] [Citation(s) in RCA: 23] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/20/2023]
Abstract
The ability to trap, manipulate and release single cells on a surface is important both for fundamental studies of cellular processes and for the development of novel lab-on-chip miniaturized tools for biological and medical applications. In this paper we demonstrate how magnetic domain walls generated in micro- and nano-structures fabricated on a chip surface can be used to handle single yeast cells labeled with magnetic beads. In detail, first we show that the proposed approach maintains the microorganism viable, as proven by monitoring the division of labeled yeast cells trapped by domain walls over 16 hours. Moreover, we demonstrate the controlled transport and release of individual yeast cells via displacement and annihilation of individual domain walls in micro- and nano-sized magnetic structures. These results pave the way to the implementation of magnetic devices based on domain walls technology in lab-on-chip systems devoted to accurate individual cell trapping and manipulation.
Collapse
Affiliation(s)
- M Donolato
- L-NESS, Dipartimento di Fisica, Politecnico di Milano, Via Anzani 42, 22100 Como, Italy.
| | | | | | | | | | | | | | | |
Collapse
|
66
|
Gach PC, Wang Y, Phillips C, Sims CE, Allbritton NL. Isolation and manipulation of living adherent cells by micromolded magnetic rafts. BIOMICROFLUIDICS 2011; 5:32002-3200212. [PMID: 22007266 PMCID: PMC3194786 DOI: 10.1063/1.3608133] [Citation(s) in RCA: 27] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/20/2011] [Accepted: 04/19/2011] [Indexed: 05/08/2023]
Abstract
A new strategy for magnetically manipulating and isolating adherent cells with extremely high post-collection purity and viability is reported. Micromolded magnetic elements (termed microrafts) were fabricated in an array format and used as culture surfaces and carriers for living, adherent cells. A poly(styrene-co-acrylic acid) polymer containing well dispersed magnetic nanoparticles was developed for creating the microstructures by molding. Nanoparticles of γFe(2)O(3) at concentrations up to 1% wt.∕wt. could be used to fabricate microrafts that were optically transparent, highly magnetic, biocompatible, and minimally fluorescent. To prevent cellular uptake of nanoparticles from the magnetic polymer, a poly(styrene-co-acrylic acid) layer lacking γFe(2)O(3) nanoparticles was placed over the initial magnetic microraft layer to prevent cellular uptake of the γFe(2)O(3) during culture. The microraft surface geometry and physical properties were altered by varying the polymer concentration or layering different polymers during fabrication. Cells plated on the magnetic microrafts were visualized using standard imaging techniques including brightfield, epifluorescence, and confocal microscopy. Magnetic microrafts possessing cells of interest were dislodged from the array and efficiently collected with an external magnet. To demonstrate the feasibility of cell isolation using the magnetic microrafts, a mixed population of wild-type cells and cells stably transfected with a fluorescent protein was plated onto an array. Microrafts possessing single, fluorescent cells were released from the array and magnetically collected. A post-sorting single-cell cloning rate of 92% and a purity of 100% were attained.
Collapse
|
67
|
Robert D, Pamme N, Conjeaud H, Gazeau F, Iles A, Wilhelm C. Cell sorting by endocytotic capacity in a microfluidic magnetophoresis device. LAB ON A CHIP 2011; 11:1902-10. [PMID: 21512692 DOI: 10.1039/c0lc00656d] [Citation(s) in RCA: 85] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/19/2023]
Abstract
Magnetically labelled cells are finding a wealth of applications for in vitro analysis as well as in vivo treatments. Sorting of cells into subpopulations based on their magnetite loading is an important step in such procedures. Here, we study the sorting of monocytes and macrophages which internalise nanoparticles to different extents based on their endocytotic capacity. Macrophages featured a high endocytotic activity and were found to internalise between 4 and 60 pg of iron per cell. They were successfully sorted into five subpopulations of narrow iron loading distributions via on-chip free-flow magnetophoresis, thus demonstrating the potential of sorting of relatively similarly loaded cells. Monocytes featured a low endocytotic capacity and took on 1 to 4 pg of iron per cell. Mixtures of monocytes and macrophages were successfully sorted within the free-flow magnetophoresis chip and good purity (>88%), efficacy (>60%) and throughput (from 10 to 100 cells s(-1)) could be achieved. The introduced method constitutes a viable tool for studies of endocytotic capacity and sorting/selection of cells based on this functionality.
Collapse
Affiliation(s)
- Damien Robert
- Laboratoire Matière et Systèmes Complexes, UMR CNRS et Université Paris Diderot, France
| | | | | | | | | | | |
Collapse
|
68
|
Choudhury D, Mo X, Iliescu C, Tan LL, Tong WH, Yu H. Exploitation of physical and chemical constraints for three-dimensional microtissue construction in microfluidics. BIOMICROFLUIDICS 2011; 5:22203. [PMID: 21799710 PMCID: PMC3145229 DOI: 10.1063/1.3593407] [Citation(s) in RCA: 20] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/13/2011] [Accepted: 05/02/2011] [Indexed: 05/06/2023]
Abstract
There are a plethora of approaches to construct microtissues as building blocks for the repair and regeneration of larger and complex tissues. Here we focus on various physical and chemical trapping methods for engineering three-dimensional microtissue constructs in microfluidic systems that recapitulate the in vivo tissue microstructures and functions. Advances in these in vitro tissue models have enabled various applications, including drug screening, disease or injury models, and cell-based biosensors. The future would see strides toward the mesoscale control of even finer tissue microstructures and the scaling of various designs for high throughput applications. These tools and knowledge will establish the foundation for precision engineering of complex tissues of the internal organs for biomedical applications.
Collapse
|
69
|
Fu CY, Lin CY, Chu WC, Chang HY. A simple cell patterning method using magnetic particle-containing photosensitive poly (ethylene glycol) hydrogel blocks: a technical note. Tissue Eng Part C Methods 2011; 17:871-7. [PMID: 21486199 DOI: 10.1089/ten.tec.2010.0690] [Citation(s) in RCA: 20] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022] Open
Abstract
All human organs consist of multiple types of cells organized in a complex pattern to meet specific functional needs. One possible approach for reconstructing human organs in vitro is to generate cell sheets of a specific pattern and later stack them systematically by layer into a three-dimensional organoid. However, many commonly used cell patterning techniques suffer drawbacks such as dependence on sophisticated instruments and manipulation of cells under suboptimal growth conditions. Here, we describe a simple cell patterning method that may overcome these problems. This method is based on magnetic force and photoresponsive poly (ethylene glycol) diacrylate (PEG-DA) hydrogels. The PEG-DA hydrogel was magnetized by mixing with iron ferrous microparticles and then fabricated into blocks with a specific pattern by photolithography. The resolution of the hydrogel empty space pattern was approximately 150 μm and the generated hydrogel blocks can be remotely manipulated with a magnet. The magnetic PEG-DA blocks were used as a stencil to define the area for cell adhesion in the cell culture dish, and the second types of cells could be seeded after the magnetic block was removed to create heterotypic cell patterns. Cell viability assay has demonstrated that magnetic PEG-DA and the patterning process produced negligible effects on cell growth. Together, our results indicate that this magnetic hydrogel-based cell patterning method is simple to perform and is a useful tool for tissue surrogate assembly for disease mechanism study and drug screening.
Collapse
Affiliation(s)
- Chien-Yu Fu
- Institute of Molecular Medicine, National Tsing Hua University, Hsin Chu, Taiwan, Republic of China
| | | | | | | |
Collapse
|
70
|
Yu X, Feng X, Hu J, Zhang ZL, Pang DW. Controlling the magnetic field distribution on the micrometer scale and generation of magnetic bead patterns for microfluidic applications. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2011; 27:5147-5156. [PMID: 21417286 DOI: 10.1021/la104400m] [Citation(s) in RCA: 32] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/30/2023]
Abstract
As is well known, controlling the local magnetic field distribution on the micrometer scale in a microfluidic chip is significant and has many applications in bioanalysis based on magnetic beads. However, it is a challenge to tailor the magnetic field introduced by external permanent magnets or electromagnets on the micrometer scale. Here, we demonstrated a simple approach to controlling the local magnetic field distribution on the micrometer scale in a microfluidic chip by nickel patterns encapsulated in a thin poly(dimethylsiloxane) (PDMS) film under the fluid channel. With the precisely controlled magnetic field, magnetic bead patterns were convenient to generate. Moreover, two kinds of fluorescent magnetic beads were patterned in the microfluidic channel, which demonstrated that it was possible to generate different functional magnetic bead patterns in situ, and could be used for the detection of multiple targets. In addition, this method was applied to generate cancer cell patterns.
Collapse
Affiliation(s)
- Xu Yu
- Key Laboratory of Analytical Chemistry for Biology and Medicine (Ministry of Education), College of Chemistry and Molecular Sciences, Wuhan University, Wuhan 430072, PR China
| | | | | | | | | |
Collapse
|
71
|
Moon S, Kim YG, Dong L, Lombardi M, Haeggstrom E, Jensen RV, Hsiao LL, Demirci U. Drop-on-demand single cell isolation and total RNA analysis. PLoS One 2011; 6:e17455. [PMID: 21412416 PMCID: PMC3055874 DOI: 10.1371/journal.pone.0017455] [Citation(s) in RCA: 47] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/13/2010] [Accepted: 02/03/2011] [Indexed: 11/18/2022] Open
Abstract
Technologies that rapidly isolate viable single cells from heterogeneous solutions have significantly contributed to the field of medical genomics. Challenges remain both to enable efficient extraction, isolation and patterning of single cells from heterogeneous solutions as well as to keep them alive during the process due to a limited degree of control over single cell manipulation. Here, we present a microdroplet based method to isolate and pattern single cells from heterogeneous cell suspensions (10% target cell mixture), preserve viability of the extracted cells (97.0±0.8%), and obtain genomic information from isolated cells compared to the non-patterned controls. The cell encapsulation process is both experimentally and theoretically analyzed. Using the isolated cells, we identified 11 stem cell markers among 1000 genes and compare to the controls. This automated platform enabling high-throughput cell manipulation for subsequent genomic analysis employs fewer handling steps compared to existing methods.
Collapse
Affiliation(s)
- Sangjun Moon
- Demirci Bio-Acoustic-MEMS in Medicine (BAMM) Laboratory, Center for Bioengineering, Brigham and Women's Hospital, Harvard Medical School, Boston, Massachusetts, United States of America
| | - Yun-Gon Kim
- Demirci Bio-Acoustic-MEMS in Medicine (BAMM) Laboratory, Center for Bioengineering, Brigham and Women's Hospital, Harvard Medical School, Boston, Massachusetts, United States of America
| | - Lingsheng Dong
- Renal Division, Brigham and Women's Hospital, Harvard Medical School, Boston, Massachusetts, United States of America
| | - Michael Lombardi
- Renal Division, Brigham and Women's Hospital, Harvard Medical School, Boston, Massachusetts, United States of America
| | - Edward Haeggstrom
- Electronics Research Laboratory, Department of Physics, University of Helsinki, Helsinki, Finland
| | - Roderick V. Jensen
- Department of Biological Sciences, Virginia Tech, Blacksburg, Virginia, United States of America
| | - Li-Li Hsiao
- Renal Division, Brigham and Women's Hospital, Harvard Medical School, Boston, Massachusetts, United States of America
- * E-mail: (UD); (L-LH)
| | - Utkan Demirci
- Demirci Bio-Acoustic-MEMS in Medicine (BAMM) Laboratory, Center for Bioengineering, Brigham and Women's Hospital, Harvard Medical School, Boston, Massachusetts, United States of America
- Renal Division, Brigham and Women's Hospital, Harvard Medical School, Boston, Massachusetts, United States of America
- Harvard-MIT Division of Health Sciences and Technology, Massachusetts Institute of Technology, Cambridge, Massachusetts, United States of America
- * E-mail: (UD); (L-LH)
| |
Collapse
|
72
|
Takeda M, Shiku H, Ino K, Matsue T. Electrochemical chip integrating scalable ring–ring electrode array to detect secreted alkaline phosphatase. Analyst 2011; 136:4991-6. [DOI: 10.1039/c1an15620a] [Citation(s) in RCA: 19] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
73
|
Practical cell labeling with magnetite cationic liposomes for cell manipulation. J Biosci Bioeng 2010; 110:124-9. [DOI: 10.1016/j.jbiosc.2010.01.014] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/27/2009] [Revised: 01/06/2010] [Accepted: 01/07/2010] [Indexed: 11/20/2022]
|
74
|
Polymer live-cell array for real-time kinetic imaging of immune cells. Biomaterials 2010; 31:5022-9. [DOI: 10.1016/j.biomaterials.2010.02.035] [Citation(s) in RCA: 24] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/28/2010] [Accepted: 02/11/2010] [Indexed: 12/12/2022]
|
75
|
Zhao Y, Zeng H. Rotational maneuver of ferromagnetic nanowires for cell manipulation. IEEE Trans Nanobioscience 2010; 8:226-36. [PMID: 20051338 DOI: 10.1109/tnb.2009.2025131] [Citation(s) in RCA: 12] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Abstract
1-D magnetic nanowires provide a powerful tool for investigating biological systems because such nanomaterials possess unique magnetic properties, which allow effective manipulation of cellular and subcellular objects. In this study, we report the rotational maneuver of ferromagnetic nanowires and their applications in cell manipulation. The rotational maneuver is studied under two different suspension conditions. The rotation of nanowires in the fluid is analyzed using Stokes flow assumption. Experimental results show that when the nanowires develop contacts with the bottom surfaces, the rotational maneuver under a modest external magnetic field can generate rapid lateral motion. The floating nanowires, on the other hand, do not exhibit substantial lateral displacements. Cell manipulation using skeletal myoblasts C2C12 shows that living cells can be manipulated efficiently on the bottom surface by the rotational maneuver of the attached nanowires. We also demonstrate the use of rotational maneuver of nanowires for creating 3-D nanowire clusters and multicellular clusters. This study is expected to add to the knowledge of nanowire-based cell manipulation and contribute to a full spectrum of control strategies for efficient use of nanowires for micro-total-analysis. It may also facilitate mechanobiological studies at cellular level, and provide useful insights for development of 3-D in vivo-like multicellular models for various applications in tissue engineering.
Collapse
Affiliation(s)
- Yi Zhao
- Laboratory for Biomedical Microsystems, Department of Biomedical Engineering, The Ohio State University, Columbus, OH 43210, USA.
| | | |
Collapse
|
76
|
Ito H, Kato R, Ino K, Honda H. Magnetic manipulation device for the optimization of cell processing conditions. J Biosci Bioeng 2010; 109:182-8. [DOI: 10.1016/j.jbiosc.2009.07.006] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/02/2009] [Revised: 07/14/2009] [Accepted: 07/15/2009] [Indexed: 01/09/2023]
|
77
|
Liu X, Sun Y. Microfabricated glass devices for rapid single cell immobilization in mouse zygote microinjection. Biomed Microdevices 2010; 11:1169-74. [PMID: 19578992 DOI: 10.1007/s10544-009-9333-5] [Citation(s) in RCA: 31] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
This paper presents the design and microfabrication of a vacuum-based cell holding device for single-cell immobilization and the use of the device in mouse zygote microinjection. The device contains many through-holes, constructed via two-sided glass wet etching and polydimethylsiloxane (PDMS)-glass bonding. Experimental results of mouse zygote immobilization and microinjection demonstrate that the device is effective for rapid cell immobilization and does not produce negative effect on embryonic development.
Collapse
Affiliation(s)
- Xinyu Liu
- Advanced Micro and Nanosystems Laboratory, University of Toronto, 5 King's College Road, Toronto, Ontario, Canada.
| | | |
Collapse
|
78
|
Okochi M, Takano S, Isaji Y, Senga T, Hamaguchi M, Honda H. Three-dimensional cell culture array using magnetic force-based cell patterning for analysis of invasive capacity of BALB/3T3/v-src. LAB ON A CHIP 2009; 9:3378-84. [PMID: 19904404 DOI: 10.1039/b909304d] [Citation(s) in RCA: 48] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/20/2023]
Abstract
A three-dimensional (3D) cell culture system has been fabricated using a magnetic force based cell patterning method, demonstrating a facile approach for the analysis of invasive capacity of BALB/3T3/v-src using an magnetic force and magnetite nanoparticles. The 3D cell patterning was performed using an external magnetic force and a pin holder, which enables the assembly of the magnetically labeled cells on the collagen gel-coated surface as array-like cell patterns, resulting in the development of a 3D in vitro culture model. The cells embedded in type I collagen showed a compacted, spheroid like configuration at each spot, and distinct, accelerated cell growth was observed in cancer model cells compared with the control cells. The developed 3D cell culture array was applied to the susceptibility assay of the GM6001 matrix metalloproteinase (MMP) inhibitor, a collagenase inhibitor; a distinct suppression of cell proliferation was observed, while little change was observed in 2D. The developed 3D cell culture array system is useful to assess the effects of pharmacologic and/or microenvironmental influences on tumor cell invasion.
Collapse
Affiliation(s)
- Mina Okochi
- Department of Biotechnology, School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan
| | | | | | | | | | | |
Collapse
|
79
|
Murata T, Yasukawa T, Shiku H, Matsue T. Electrochemical single-cell gene-expression assay combining dielectrophoretic manipulation with secreted alkaline phosphatase reporter system. Biosens Bioelectron 2009; 25:913-9. [DOI: 10.1016/j.bios.2009.09.001] [Citation(s) in RCA: 77] [Impact Index Per Article: 5.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/09/2009] [Revised: 08/20/2009] [Accepted: 09/01/2009] [Indexed: 11/28/2022]
|
80
|
Shi J, Ahmed D, Mao X, Lin SCS, Lawit A, Huang TJ. Acoustic tweezers: patterning cells and microparticles using standing surface acoustic waves (SSAW). LAB ON A CHIP 2009; 9:2890-5. [PMID: 19789740 DOI: 10.1039/b910595f] [Citation(s) in RCA: 346] [Impact Index Per Article: 23.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/17/2023]
Abstract
Here we present an active patterning technique named "acoustic tweezers" that utilizes standing surface acoustic wave (SSAW) to manipulate and pattern cells and microparticles. This technique is capable of patterning cells and microparticles regardless of shape, size, charge or polarity. Its power intensity, approximately 5x10(5) times lower than that of optical tweezers, compares favorably with those of other active patterning methods. Flow cytometry studies have revealed it to be non-invasive. The aforementioned advantages, along with this technique's simple design and ability to be miniaturized, render the "acoustic tweezers" technique a promising tool for various applications in biology, chemistry, engineering, and materials science.
Collapse
Affiliation(s)
- Jinjie Shi
- Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA 16802, USA
| | | | | | | | | | | |
Collapse
|
81
|
Charnley M, Textor M, Khademhosseini A, Lutolf MP. Integration column: microwell arrays for mammalian cell culture. Integr Biol (Camb) 2009; 1:625-34. [PMID: 20027371 DOI: 10.1039/b918172p] [Citation(s) in RCA: 119] [Impact Index Per Article: 7.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
Abstract
Microwell arrays have emerged as robust and versatile alternatives to conventional mammalian cell culture substrates. Using standard microfabrication processes, biomaterials surfaces can be topographically patterned to comprise high-density arrays of micron-sized cavities with desirable geometry. Hundreds to thousands of individual cells or cell colonies with controlled size and shape can be trapped in these cavities by simple gravitational sedimentation. Efficient long-term cell confinement allows for parallel analyses and manipulation of cell fate during in vitro culture. These live-cell arrays have already found applications in cell biology, for example to probe the effect of cell colony size on embryonic stem cell differentiation, to dissect the heterogeneity in single cell proliferation kinetics of neural or hematopoietic stem/progenitor cell populations, or to elucidate the role of cell shape on cell function. Here, we highlight the key applications of these platforms, hopefully inspiring biologists to apply these systems for their own studies.
Collapse
Affiliation(s)
- Mirren Charnley
- BioInterfaceGroup, Laboratory for Surface Science and Technology, Department of Materials, ETH Zurich, Switzerland
| | | | | | | |
Collapse
|
82
|
Hook AL, Voelcker NH, Thissen H. Patterned and switchable surfaces for biomolecular manipulation. Acta Biomater 2009; 5:2350-70. [PMID: 19398391 DOI: 10.1016/j.actbio.2009.03.040] [Citation(s) in RCA: 80] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/17/2008] [Revised: 02/19/2009] [Accepted: 03/24/2009] [Indexed: 01/08/2023]
Abstract
The interactions of biomolecules and cells with solid interfaces play a pivotal role in a range of biomedical applications and have therefore been studied in great detail. An improved understanding of these interactions results in the ability to manipulate DNA, proteins and other biomolecules, as well as cells, spatially and temporally at surfaces with high precision. This in turn engenders the development of advanced devices, such as biosensors, bioelectronic components, smart biomaterials and microarrays. Spatial control can be achieved by the production of patterned surface chemistries using modern high-resolution patterning technologies based on lithography, microprinting or microfluidics, whilst temporal control is accessible through the application of switchable surface architectures. The combination of these two surface properties offers unprecedented control over the behaviour of biomolecules and cells at the solid-liquid interface. This review discusses the behaviour of biomolecules and cells at solid interfaces and highlights fundamental and applied research exploring patterned and switchable surfaces.
Collapse
Affiliation(s)
- A L Hook
- School of Chemistry, Physics and Earth Sciences, Flinders University, Adelaide 5001, Australia.
| | | | | |
Collapse
|
83
|
Tan CP, Seo BR, Brooks DJ, Chandler EM, Craighead HG, Fischbach C. Parylene peel-off arrays to probe the role of cell-cell interactions in tumour angiogenesis. Integr Biol (Camb) 2009; 1:587-94. [PMID: 20023775 DOI: 10.1039/b908036h] [Citation(s) in RCA: 49] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Microenvironmental conditions impact tumour angiogenesis, but the role of cell-cell interactions in modulating the angiogenic capability of tumour cells is not well understood. We have microfabricated a peel-off cell-culture array (PeelArray) chip to spatiotemporally control interactions between tumour cells in a large array format and to analyse angiogenic factor secretion in response to these conditions. The PeelArray chip consists of a polyethylene glycol (PEG) treated glass coverslip coated with a parylene-C template that can be easily peeled off to selectively micropattern biomolecules and cells. We have designed the PeelArray chip to reproducibly deposit large uniform arrays of isolated single cells or isolated cell clusters on fibronectin features of defined surface areas. We have utilised this microfabricated culture system to study the secretion of angiogenic factors by tumour cells, in the presence or absence of cell-cell contact as controlled by micropatterning. Our results indicate that cell-cell interactions play a synergistic role in regulating the expression of angiogenic factors (i.e., vascular endothelial growth factor [VEGF] and interleukin-8 [IL-8]) in various cancer cell lines, independent of other more complex microenvironmental cues (e.g. hypoxia). Our PeelArray chip is a simple and adaptable micropatterning method that enables quantitative profiling of protein secretions and hence, a better understanding of the mechanisms by which cell-cell interactions regulate tumour cell behaviour and angiogenesis.
Collapse
Affiliation(s)
- Christine P Tan
- Department of Biomedical Engineering, Cornell University, Ithaca, NY 14853, USA
| | | | | | | | | | | |
Collapse
|
84
|
Liu W, Dechev N, Foulds IG, Burke R, Parameswaran A, Park EJ. A novel permalloy based magnetic single cell micro array. LAB ON A CHIP 2009; 9:2381-90. [PMID: 19636470 DOI: 10.1039/b821044f] [Citation(s) in RCA: 31] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/10/2023]
Abstract
Devices capable of automatically aligning cells onto geometrical arrays are of great interest to biomedical researchers. Such devices can facilitate the study of numerous cells while the cells remain physically separated from one another. In this way, cell arrays reduce cell-to-cell interactions while the cells are all subjected to common stimuli, which allows individual cell behaviour to be revealed. The use of arrays allows for the parallel analysis of single cells, facilitates data logging, and opens the door to the use of automated machine-based single cell analysis techniques. A novel permalloy based magnetic single cell micro array (MSCMA) is presented in this paper. The MSCMA creates an array of magnetic traps by generating magnetic flux density peaks at predefined locations. When using cells labelled with immunomagnetic labels, the cells will interact with the magnetic fields, and can be captured at the magnetic trap sites. Prototypes of the MSCMA have been successfully fabricated and tested using both fixed and live Jurkat cells (10 microm average diameter) that were labelled. The prototypes performed as predicted during experimental trials. The experimental results show that the MSCMA can randomly array up to 136 single cells per square mm. The results also show that the number of single cells captured is a function of the trap site density of the MSCMA design and the cell density in the fluid sample.
Collapse
Affiliation(s)
- William Liu
- Department of Mechanical Engineering, University of Victoria, PO Box 3055 STN CSC, Victoria, BC, CanadaV8W 3P6.
| | | | | | | | | | | |
Collapse
|
85
|
Ino K, Okochi M, Honda H. Application of magnetic force-based cell patterning for controlling cell-cell interactions in angiogenesis. Biotechnol Bioeng 2009; 102:882-90. [PMID: 18821635 DOI: 10.1002/bit.22104] [Citation(s) in RCA: 43] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/21/2022]
Abstract
To investigate the effects of cell-cell interactions on cellular function, the microenvironment surrounding cells should be precisely controlled. Here, we describe a cell patterning technique, which utilizes magnetic force and magnetite nanoparticles. This method was used to develop cell culture arrays for investigation of cell behaviors in angiogenesis. Pin holder devices that contain more than 6,000 pillars on the surface are used for fabricating the cell culture arrays by setting it on a magnet. The magnetically labeled cells were arranged by magnetic distribution. When the human umbilical vein endothelial cells are arranged at 250 microm intervals (5.9 cells/spot), the cells spread toward other cell cluster on adjacent spots in 4.5 h, and formed cord-like structures in 8.5 h. It was shown that cell-cell interactions were successfully investigated using magnetic cell arrangement.
Collapse
Affiliation(s)
- Kosuke Ino
- Department of Biotechnology, School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan
| | | | | |
Collapse
|
86
|
Kinoshita K, Ozawa T, Tajiri K, Kadowaki S, Kishi H, Muraguchi A. Identification of antigen-specific B cells by concurrent monitoring of intracellular Ca2+ mobilization and antigen binding with microwell array chip system equipped with a CCD imager. Cytometry A 2009; 75:682-7. [PMID: 19526489 DOI: 10.1002/cyto.a.20758] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
Abstract
B cells are very heterogeneous, consisting of more than 10(9) B-cell clones with distinct specificities for antigens in each individual. To identify single B cells with antigen specificity, we have been developing cell microarray technology using microwell array chips whose microwells each capture a single B cell. Using microwell array chips, we detected antigen-specific B cells by monitoring antigen-induced intracellular Ca2+ mobilization with a CCD scanner (MAC-CCD system) or the binding of fluorescence-labeled antigen to cells with a confocal laser scanner. We retrieved target cells from the chip, cloned immunoglobulin genes, and produced antigen-specific antibodies. However, these methods present some difficulties: the former technique could not detect cells whose frequency was less than 0.05% and the latter one took a long time to identify the objective cells although it could detect cells at a frequency of 0.01%. Here, we have combined the advantages of these two methods. Monitoring antigen-induced intracellular Ca2+ mobilizations and the binding of fluorescence-labeled antigens simultaneously with a MAC-CCD system enabled us to detect rapidly, antigen-specific B cells whose frequency was less than 0.01% with high efficiency. Our system provides a superior screening system for antigen-specific B cells and extends the horizons of multiparameter single-cell analysis in heterogeneous cell populations.
Collapse
Affiliation(s)
- Koshi Kinoshita
- Department of Immunology, Graduate School of Medicine and Pharmaceutical Sciences, University of Toyama, Japan
| | | | | | | | | | | |
Collapse
|
87
|
Tanaka Y, Endo T, Yanagida Y, Hatsuzawa T. Design and fabrication of a dielectrophoresis-based cell-positioning and cell-culture device for construction of cell networks. Microchem J 2009. [DOI: 10.1016/j.microc.2008.12.003] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/21/2022]
|
88
|
Frasca G, Gazeau F, Wilhelm C. Formation of a three-dimensional multicellular assembly using magnetic patterning. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2009; 25:2348-2354. [PMID: 19166275 DOI: 10.1021/la8030792] [Citation(s) in RCA: 39] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
We demonstrate a facile approach to design three-dimensional cellular assembly of tunable size and controlled geometry with applications for tissue engineering. Three-dimensional cell patterning was performed using external magnetic forces, without the need for substrate chemical or physical modifications. Human endothelial progenitor cells and mouse macrophages were magnetically labeled using anionic citrate-coated iron oxide nanoparticles. Two magnetic tips were designed, and their magnetic field cartographies were calibrated. The focalized magnetic force generated ensured an efficient entrapment of the cells at the tips vicinity. By tuning the magnetic field gradient geometry and intensity, the magnetic cellular load, and the number of cells, we fully described the formation of the three-dimensional multicellular assemblies, and estimated the corresponding packing factor for a large range of experimental conditions.
Collapse
Affiliation(s)
- Guillaume Frasca
- Laboratoire Matière et Systèmes Complexes (MSC), UMR 7057 CNRS & Université Paris-Diderot, Paris Cedex 13, F-75205, France
| | | | | |
Collapse
|
89
|
Liu W, Dechev N, Lee SW, Foulds IG, Parameswaran A, Burke R, Park EJ. Development of a magnetic Single Cell Micro Array. ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. ANNUAL INTERNATIONAL CONFERENCE 2009; 2008:3170-3. [PMID: 19163380 DOI: 10.1109/iembs.2008.4649877] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
Experiments using single cells are valuable for revealing individual cell behaviour, which is of interest to many biomedical researchers. In such experiments, various types of devices capable of aligning cells into organized arrays are often used. In this paper, we present a novel Single Cell Micro Array device that makes use of magnetic forces. Prototypes of this device have been fabricated, and successfully tested using Jurkat cells that have been labelled with nano-magnetic particles. Experimental results show that the prototypes are effective on capturing and placing the labelled cells in an array.
Collapse
Affiliation(s)
- W Liu
- Department of Mechanical Engineering, University of Victoria, BC, Canada.
| | | | | | | | | | | | | |
Collapse
|
90
|
Huang G, Mei Y, Thurmer DJ, Coric E, Schmidt OG. Rolled-up transparent microtubes as two-dimensionally confined culture scaffolds of individual yeast cells. LAB ON A CHIP 2009; 9:263-8. [PMID: 19107283 DOI: 10.1039/b810419k] [Citation(s) in RCA: 27] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/04/2023]
Abstract
Transparent oxide rolled-up microtube arrays were constructed on Si substrates by the deposition of a pre-stressed oxide layer on a patterned photoresist sacrificial layer and the subsequent removal of this sacrificial layer. These microtubes as well as their arrays can be well positioned onto a chip for further applications, while their dimensions (e.g. length, diameter and wall thickness) are controlled by tunable parameters of the fabrication process. Due to the unique tubular structure and optical transparency, such rolled-up microtubes can serve as well-defined two-dimensionally (2D) confined cell culture scaffolds. In our experiments, yeast cells exhibit different growth behaviors (i.e. their arrangement) in microtubes with varied diameters. In an extremely small microtube the yeast cell becomes highly elongated during growth but still survives. Detailed investigations on the behavior of individual yeast cells in a single microtube are carried out in situ to elucidate the mechanical interaction between microtubes and the 2D confined cells. The confinement of tubular channels causes the rotation of cell pairs, which is more pronounced in smaller microtubes, leading to different cellular assemblies. Our work demonstrates good capability of rolled-up microtubes for manipulating individual and definite cells, which promises high potential in lab-on-a-chip applications, for example as a bio-analytic system for individual cells if integrated with sensor functionalities.
Collapse
Affiliation(s)
- Gaoshan Huang
- Institute for Integrative Nanosciences, IFW Dresden, Helmholtzstr. 20, D-01069, Dresden, Germany.
| | | | | | | | | |
Collapse
|
91
|
Ozawa T, Kinoshita K, Kadowaki S, Tajiri K, Kondo S, Honda R, Ikemoto M, Piao L, Morisato A, Fukurotani K, Kishi H, Muraguchi A. MAC-CCD system: a novel lymphocyte microwell-array chip system equipped with CCD scanner to generate human monoclonal antibodies against influenza virus. LAB ON A CHIP 2009; 9:158-63. [PMID: 19209349 DOI: 10.1039/b810438g] [Citation(s) in RCA: 21] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
Abstract
We previously developed a lymphocyte microwell-array system, which effectively detects antigen-specific B-cells by monitoring intracellular Ca(2+) mobilization at the single-cell level with a fluorescent Ca(2+) indicator, fluo-4. However, it is difficult for the system to perform time-lapse monitoring. Here, we developed a novel method, a lymphocyte microwell-array chip system equipped with a charge-coupled device (CCD) time-lapse scanner (MAC-CCD system), for monitoring intracellular Ca(2+) mobilization. The MAC-CCD system is able to monitor intracellular Ca(2+) mobilization of more than 15,000-20,000 individual live B-cells every 10 s. In addition, we adopted a correlation method in a MAC-CCD system, which enabled us to detect B-cells with a frequency of as few as 0.046%. Furthermore, we succeeded in obtaining six influenza nucleoprotein-specific human monoclonal antibodies from the peripheral blood of influenza-vaccinated volunteers. These results demonstrate that the MAC-CCD system with a correlation method could detect very rare antigen-specific B-cells.
Collapse
Affiliation(s)
- T Ozawa
- Department of Immunology, Graduate School of Medicine and Pharmaceutical Sciences, University of Toyama, 2630 Sugitani, Toyama, 930-0194, Japan
| | | | | | | | | | | | | | | | | | | | | | | |
Collapse
|
92
|
Castillo J, Dimaki M, Svendsen WE. Manipulation of biological samples using micro and nano techniques. Integr Biol (Camb) 2009; 1:30-42. [DOI: 10.1039/b814549k] [Citation(s) in RCA: 114] [Impact Index Per Article: 7.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/30/2023]
|
93
|
Koide H, Isaji Y, Okochi M, Honda H. Preparation of L929 Cell Array by Magnetic Pin Holder Device for Single Cell Function Analysis. JOURNAL OF CHEMICAL ENGINEERING OF JAPAN 2009. [DOI: 10.1252/jcej.08we239] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Hironobu Koide
- Department of Biotechnology, School of Engineering, Nagoya University
| | - Yayoi Isaji
- Department of Biotechnology, School of Engineering, Nagoya University
| | - Mina Okochi
- Department of Biotechnology, School of Engineering, Nagoya University
| | - Hiroyuki Honda
- Department of Biotechnology, School of Engineering, Nagoya University
- MEXT Innovative Research Center for Preventive Medical Engineering, Nagoya University
| |
Collapse
|
94
|
Schumann CA, Dörrenhaus A, Franzke J, Lampen P, Dittrich PS, Manz A, Roos PH. Concomitant detection of CYP1A1 enzymatic activity and CYP1A1 protein in individual cells of a human urothelial cell line using a bilayer microfluidic device. Anal Bioanal Chem 2008; 392:1159-66. [DOI: 10.1007/s00216-008-2378-0] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/20/2008] [Revised: 08/13/2008] [Accepted: 08/29/2008] [Indexed: 12/20/2022]
|