Ultra-stable hollow nanotube conjugated microporous polymer incorporating fluorenyl moieties for Co-capture of PM and CO2

Conjugated microporous polymers have a highly delocalized π-π conjugated porous skeleton connected by covalent bonds, which can combine their excellent stability with high adsorption, in order to be applied to the study of co-capture of harmful particulate matter (PM) and carbon dioxide (CO2) under high temperature and high humidity conditions. In this paper, fluorene-based coupled conjugated microporous polymers (D-CMPs) with functionalized hollow nanotubes and abundant microporous structures were proposed. Through mechanism exploration and molecular electrostatic potential (MESP) calculation, the capture efficiency, adsorption capacity and selectivity of PM and CO2 in the waste gas stream of carbon-based combustion were analyzed. The results indicate that D-CMPs, with their rigid carbon-based π-conjugated framework, exhibit excellent tolerance under prolonged high-humidity conditions, with a capture efficiency exceeding 99.87% for PM0.3 and exceeding 99.99% for PM2.5. Meanwhile, based on its chemical/thermal stability, it can realize the recycling of adsorption-regeneration. On this basis, the "slip effect" induced by the open three-dimensional hierarchical porous structure of D-CMPs significantly enhances airflow dispersion and improves gas throughput (with a minimal permeation resistance of only 15 Pa). At a pressure of 1 bar and a temperature of 273.15 K, D-CMP-2 exhibited a CO2 adsorption capacity of up to 2.69 mmol g-1. The fitting results of three isothermal adsorption models demonstrate that D-CMPs exhibit an outstanding equilibrium selectivity towards CO2. Therefore, prior to the widespread adoption of low-carbon and clean energy technologies, porous solid materials exhibiting excellent structural stability, equilibrium selectivity, environmental tolerance, and high adsorption capacity emerge as optimal candidates for the treatment of industrial waste gases.

Size-Dependent Deformation and Competition H-Bond Site-Induced Individual Fluorescence Response of a Single-Crystal Three-Dimensional Covalent Organic Framework

Understanding the individual fluorescence response mechanism of covalent organic frameworks (COFs) at a single-crystal level is of great significance for the rational design of COF-based microsensors but unreachable because all previous COF-based sensors are performed with average fluorescence response behavior of various sized polycrystalline COFs. Herein, we design to explore the fluorescence response of a monodisperse single-crystal COF and further reveal the individual heterogeneity of the response mechanism. Three-dimensional single-crystal COF-301 (SCOF-301) with an intramolecular H-bond-induced excited-state intramolecular proton-transfer effect is selected as a proof-of-concept SCOF. With ethanol, benzene, and ammonia as model analytes, three different deformation and competition H-bond site-induced fluorescence response mechanisms related to crystal size are revealed. Small single particles of SCOF-301 (SSCOF-301) exhibit a more flexible structure, leading to the dominant role of deformation in the fluorescence response of small-sized SSCOF-301. The decreasing flexibility of SSCOF-301 with the increase of crystal size results in involvement of competition of the H-bond site to the fluorescence response besides deformation. Further increase of the crystal size makes the large-sized SSCOF-301 difficult to deform; thus, the competition of the H-bond site dominates the fluorescence response. This work provides a deep understanding of the individual fluorescence response mechanism of COFs to guide the design of a functional COF sensor with suitable size and mechanism for different structural analytes.

Enhanced photocatalysis of metal/covalent organic frameworks by plasmonic nanoparticles and homo/hetero-junctions

Metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) have garnered attention in photocatalysis due to their unique features including extensive surface area, adjustable pores, and the ability to incorporate various functional groups. However, challenges such as limited visible light absorption and rapid electron-hole recombination often hinder their photocatalytic efficiency. Recent developments have introduced plasmonic nanoparticles (NPs) and junctions to enhance the photocatalytic performance of MOFs/COFs. This paper provides a comprehensive review of recent advancements in MOF/COF-based photocatalysts improved by integration of plasmonic NPs and junctions. We begin by examining the utilization of plasmonic NPs, known for absorbing longer-wavelength light compared to typical MOFs/COFs. These NPs exhibit localized surface plasmon resonance (LSPR) when excited, effectively enhancing the photocatalytic performance of MOFs/COFs. Moreover, we discuss the role of homo/hetero-junctions in facilitating charge separation, further boosting the photocatalytic performance of MOFs/COFs. The mechanisms behind the improved photocatalytic performance of these composites are discussed, along with an assessment of challenges and opportunities in the field, guiding future research directions.

Sustainable remediation of pesticide pollutants using covalent organic framework - A review on material properties, synthesis methods and application

Covalent organic frameworks (COF) have emerged as a potential class of materials for a variety of applications in a wide number of sectors including power storage, environmental services, and biological applications due to their ordered and controllable porosity, large surface area, customizable structure, remarkable stability, and diverse electrical characteristics. COF have received a lot of attention in recent years in the field of environmental remediation, It also find its way to eliminate the emerging pollutant from the environment notably pesticide from polluted water. This review more concentrated on the application of COF in pesticide removal by modifying COF structure, COF synthesis and material properties. To increase the adsorption ability and selectivity of the material towards certain pesticides removal, the synthesis of COF involves organic linkers with various functional groups such as amine, carboxylic acid groups etc. The COF have a high degree of stability and endurance make them suitable for intermittent usage in water treatment applications. This review manifests the novel progress where modified COFs employed in a prominent manner to remove pesticides from polluted water. Some examples of COF application in the eradication of pesticides are triformyl phenylene framework functionalized with amine groups has capacity to remove up to 50 mg/l of Organophosphorus - chlorpyrifos. COF modified to improve their photocatalytic capacity to breakdown the pesticide under visible light irradiation. COF tetraphenyl ethylene linked with carboxylic acid group shows efficient photocatalytic degradation of 90% of organochlorine insecticide endosulfan when subjected to visible light. Atrazine and imidacloprid are reduced from 100 ppm to 1 ppm in aqueous solutions by COF based on high adsorption capacity. In addition, the strategies, technique, synthesis and functional group modification design of COF are discussed.

Bio-Inspired Subnanofluidics: Advanced Fabrication and Functionalization

Biological ion channels can realize high-speed and high-selective ion transport through the protein filter with the sub-1-nanometer channel. Inspired by biological ion channels, various kinds of artificial subnanopores, subnanochannels, and subnanoslits with improved ion selectivity and permeability are recently developed for efficient separation, energy conversion, and biosensing. This review article discusses the advanced fabrication and functionalization methods for constructing subnanofluidic pores, channels, tubes, and slits, which have shown great potential for various applications. Novel fabrication methods for producing subnanofluidics, including top-down techniques such as electron beam etching, ion irradiation, and electrochemical etching, as well as bottom-up approaches starting from advanced microporous frameworks, microporous polymers, lipid bilayer embedded subnanochannels, and stacked 2D materials are well summarized. Meanwhile, the functionalization methods of subnanochannels are discussed based on the introduction of functional groups, which are classified into direct synthesis, covalent bond modifications, and functional molecule fillings. These methods have enabled the construction of subnanochannels with precise control of structure, size, and functionality. The current progress, challenges, and future directions in the field of subnanofluidic are also discussed.

Europium(III) Functionalized Covalent Organic Framework as Sensitive and Selective Fluorescent Switch for Detection of Uranium

Uranium poses severe health risks due to its radioactivity and chemical toxicity if released into the environment. Therefore, there is an urgent demand to develop sensing materials in situ monitoring of uranium with high sensitivity and stability. In this work, a fluorescent Eu3+-TFPB-Bpy is synthesized by grafting Eu3+ cation onto TFPB-Bpy covalent organic framework (COF) synthesized through Schiff base condensation of monomers 1,3,5-tris(4-formylphenyl)benzene (TFPB) and 5,5'-diamino-2,2'-bipyridine (Bpy). The fluorescence of Eu3+-TFPB-Bpy is enhanced compared with that of TFPB-Bpy, which is originated from the intramolecular rotations of building blocks limited by the bipyridine units of TFPB-Bpy coordinated with Eu3+. More significantly, Eu3+-TFPB-Bpy is a highly efficient probe for sensing UO22+ in aqueous solution with the luminescence intensity efficiently amplified by complexation of UO22+ with Eu3+. The turn-on sensing capability was derived from the resonance energy transfer occurring from UO22+ to the Eu3+-TFPB-Bpy. The developed probe displayed desirable linear range from 5 nM to 5 μM with good selectivity and rapid response time (2 s) for UO22+ in mining wastewater. This strategy provides a vivid illustration for designing luminescence lanthanide COF hybrid materials with applications in environmental monitoring.

Progress and perspectives of sorption-based atmospheric water harvesting for sustainable water generation: Materials, devices, and systems

Establishing alternative methods for freshwater production is imperative to effectively alleviate global water scarcity, particularly in land-locked arid regions. In this context, extracting water from the ubiquitous atmospheric moisture is an ingenious strategy for decentralized freshwater production. Sorption-based atmospheric water harvesting (SAWH) shows strong potential for supplying liquid water in a portable and sustainable way even in desert environments. Herein, the latest progress in SAWH technology in terms of materials, devices, and systems is reviewed. Recent advances in sorbent materials with improved water uptake capacity and accelerated sorption-desorption kinetics, including physical sorbents, polymeric hydrogels, composite sorbents, and ionic solutions, are discussed. The thermal designs of SAWH devices for improving energy utilization efficiency, heat transfer, and mass transport are evaluated, and the development of representative SAWH prototypes is clarified in a chronological order. Thereafter, state-of-the-art operation patterns of SAWH systems, incorporating intermittent, daytime continuous and 24-hour continuous patterns, are examined. Furthermore, current challenges and future research goals of this cutting-edge field are outlined. This review highlights the irreplaceable role of heat and mass transfer enhancement and facile structural improvement for constructing high-yield water harvesters.

Superoxide radical generator based on triphenylamine-based supramolecular organic framework for green light photocatalysis

Supramolecular organic frameworks (SOFs) mostly require high-energy purple or blue light for photocatalytic reactions, while highly abundant and low-energy light systems have rarely been explored. Therefore, it is necessary to construct 2D SOFs for low-energy light-induced photocatalysis. This study describes the design and synthesis of a water-soluble two-dimensional (2D) supramolecular organic framework (TP-SOF) using the host-guest interaction between a triphenylamine derivative (TP-3Py) and cucurbit[8]uril (CB[8]). The formation of the 2D SOF can be attributed to the synergistic impact resulting from the orientated head-to-tail superposition mode between the vinylpyridine arms of TP-3Py and CB[8], which results in a significant redshift in the UV-vis absorption spectrum, especially displaying a strong absorption band in the green light region. The monomeric TP-3Py can effectively produce singlet oxygen (1O2) and realize the photocatalytic oxidation of thioanisole in the aqueous solution. In comparison to monomeric TP-3Py, the confinement effect of CB[8] results in a notable enhancement in the production efficiency of superoxide anion radicals (O2•-), exhibiting promising prospects in the field of photocatalytic oxidation reaction, which facilitates the application of TP-SOF as a very efficient photosensitizer for the promotion of the oxidative hydroxylation of arylboronic acids under green light in the aqueous solution, giving a high yield of 91%. The present study not only presents a compelling illustration of photocatalysis utilizing a 2D SOF derived from triphenylamine, but also unveils promising avenues for the photocatalytic oxidation of SOF employing low-energy light systems.

Effect of interlayer slipping on the geometric, thermal and adsorption properties of 2D covalent organic frameworks: a comprehensive review based on computational modelling studies

Two-dimensional covalent organic frameworks (2D-COFs) are a class of crystalline porous organic polymers, consisting of 2D-planar sheets stacked together perpendicularly via noncovalent forces. Since their discovery, 2D-COFs have attracted extensive attention for optoelectronic and adsorption applications. Owing to the layer stacking nature of 2D COFs, various new slipped structures that are energetically favourable can be designed. These interlayer slipped structures are actively responsible for tuning (mostly enhancing) the optoelectronic properties, thermal properties, and mechanical strength of 2D COFs. This review summarizes the effect of interlayer slipping on the energetic stability, electronic behaviour and gas adsorption properties of 2D layered COFs, which is explained through computational modelling simulations. Since computational modelling offers a deep insight into electronic behaviour at the atomic scale, which is potentially impossible through experimental techniques, the introduction and role of computational techniques in such studies have also been described.

Reducing undesired solubility of squarephaneic tetraimide for use as an organic battery electrode material

Locally aromatic alkyl-N-substituted squarephaneic tetraimide (SqTI) conjugated macrocycles are four-electron reducible, owing to global aromaticity and presumed global Baird aromaticity of the dianion and tetraanion states, respectively. However, their good solubility inhibits their application as a battery electrode material. By applying sidechain removal as a strategy to reduce SqTI solubility, we report the development of its unsubstituted derivative SqTI-H, which was obtained directly from squarephaneic tetraanhydride by facile treatment with hexamethyldisilazane and MeOH. Compared to alkyl-N-substituted SqTI-Rs, SqTI-H exhibited further improved thermal stability and low neutral state solubility in most common organic solvents, owing to computationally demonstrated hydrogen-bonding capabilities emanating from each imide position on SqTI-H. Reversible solid state electrochemical reduction of SqTI-H to the globally aromatic dianion state was also observed at -1.25 V vs. Fc/Fc+, which could be further reduced in two stages. Preliminary testing of SqTI-H in composite electrodes for lithium-organic half cells uncovered imperfect cycling performance, which may be explained by persistent solubility of reduced states, necessitating further optimisation of electrode fabrication procedures to attain maximum performance.

Synthesis of carbon quantum dots/porous aromatic frameworks (CQDs/PAF-45) composites and their enhanced photocatalytic performance

Modification and functionalization of porous aromatic framework (PAF) materials have emerged as crucial research directions in various fields. In this study, we employed a hydrothermal method to synthesize a carbon quantum dots (CQDs) solution. By loading different amounts of CQDs onto the surface of PAF-45 material through ultrasonic and hydrothermal treatments, we successfully formed CQDs/PAF-45 composite materials. The introduction of CQDs effectively transformed the hydrophobic nature of PAF-45 into a hydrophilic material, thereby overcoming the challenge of achieving efficient contact between PAF catalysts and reactants in aqueous solutions. In the photocatalytic degradation experiments of Rhodamine B (RhB), tetracycline, CQDs/PAF-45 composite materials surpassed that of the pristine PAF-45 material. Notably, the 1 wt% CQDs/PAF-45 composite material exhibited the highest photocatalytic activity, with degradation efficiencies for Rhodamine B, tetracycline, and phenol approximately 1.4 times, 1.5 times and 1.5 times higher than those of the PAF-45 material, respectively.

Hierarchically Porous Covalent Organic Frameworks: Synthesis Methods and Applications

Covalent organic frameworks (COFs) with high porosity have garnered considerable interest for various applications owing to their robust and customizable structure. However, conventional COFs are hindered by their narrow pore size, which poses limitations for applications such as heterogeneous catalysis and guest delivery that typically involve large molecules. The development of hierarchically porous COF (HP-COF), featuring a multi-scale aperture distribution, offers a promising solution by significantly enhancing the diffusion capacity and mass transfer for larger molecules. This review focuses on the recent advances in the synthesis strategies of HP-COF materials, including topological structure design, in-situ templating, monolithic COF synthesis, defect engineering, and crystalline self-transformation. The specific operational principles and affecting factors in the synthesis process are summarized and discussed, along with the applications of HP-COFs in heterogeneous catalysis, toxic component treatment, optoelectronics, and the biomedical field. Overall, this review builds a bridge to understand HP-COFs and provides guidance for further development of them on synthesis strategies and applications.

Covalent organic frameworks: spotlight on applications in the pharmaceutical arena

Covalent organic frameworks (COFs) have much potential in the field of analytical separation research due to their distinctive characteristics, including easy modification, low densities, large specific surface areas and permanent porosity. This article provides a historical overview of the synthesis and broad perspectives on the applications of COFs. The use of COF-based membranes in gas separation, water treatment (desalination, heavy metals and dye removal), membrane filtration, photoconduction, sensing and fuel cells is also covered. However, these COFs also demonstrate great promise as solid-phase extraction sorbents and solid-phase microextraction coatings. In addition to various separation applications, this work aims to highlight important advancements in the synthesis of COFs for chiral and isomeric compounds.

Cost-effective removal of Cr(VI) ions from aqueous media using L-cysteine functionalized gold nanoparticles embedded in melamine-based covalent organic framework (Cys-AuNPs@COF)

Due to the growing concern about the environmental effects of heavy metals, researchers are developing materials that possess high absorption capacity in addition to selectivity and high absorption speed. Recently, covalent organic frameworks (COFs) have been considered as emerging and promising adsorbents for the removal of many types of pollutants. In this work, a novel and selective adsorbent (Cys-AuNPs@COF) was prepared by embedding gold nanoparticles functionalized with L-cysteine in melamine-based COF for the removal of Cr(VI) ions from wastewater. The synthesized Cys-AuNPs@COF were characterizedby Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction analysis (XRD), Field emission scanning electron microscopy (FESEM), Energy-dispersive X-ray spectroscopy (EDX), Thermo-gravimetric analysis (TGA), and elemental mapping (EMA) analysis. The removal of Cr(VI) ions was performed using a batch mode process by taking advantage of response surface methodology (RSM) based on a central composite design (CCD) model. The maximum adsorption capacity of Cys-AuNPs@COF was 151.5 mg g-1. The experimental results followed the Langmuir model and showed pseudo-second-order kinetics. A portable, low-cost, and highly sensitive device with a smartphone colorimeter platform was developed for in situ measurement of trace amounts of chromium (VI) ions. Due to its simplicity and versatility, this method has the potential to serve as an alternative to conventional field analysis methods.

Porous materials as effective chemiresistive gas sensors

Chemiresistive gas sensors (CGSs) have revolutionized the field of gas sensing by providing a low-power, low-cost, and highly sensitive means of detecting harmful gases. This technology works by measuring changes in the conductivity of materials when they interact with a testing gas. While semiconducting metal oxides and two-dimensional (2D) materials have been used for CGSs, they suffer from poor selectivity to specific analytes in the presence of interfering gases and require high operating temperatures, resulting in high signal-to-noise ratios. However, nanoporous materials have emerged as a promising alternative for CGSs due to their high specific surface area, unsaturated metal actives, and density of three-dimensional inter-connected conductive and pendant functional groups. Porous materials have demonstrated excellent response and recovery times, remarkable selectivity, and the ability to detect gases at extremely low concentrations. Herein, our central emphasis is on all aspects of CGSs, with a primary focus on the use of porous materials. Further, we discuss the basic sensing mechanisms and parameters, different types of popular sensing materials, and the critical explanations of various mechanisms involved throughout the sensing process. We have provided examples of remarkable performance demonstrated by sensors using these materials. In addition to this, we compare the performance of porous materials with traditional metal-oxide semiconductors (MOSs) and 2D materials. Finally, we discussed future aspects, shortcomings, and scope for improvement in sensing performance, including the use of metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and porous organic polymers (POPs), as well as their hybrid counterparts. Overall, CGSs using porous materials have the potential to address a wide range of applications, including monitoring water quality, detecting harmful chemicals, improving surveillance, preventing natural disasters, and improving healthcare.

Covalent organic framework/layered double hydroxide composite-coated poly(ether ether ketone) jacket for stir bar sorptive extraction of Sudan dyes

A novel coating for stir bar sorptive extraction was developed by growing a covalent organic framework, TpPa-1 (derived from phenylenediamine and 1,3,5-trimethylphloroglucinol), onto the surface of Ni-Al layered double hydroxide. Using a poly(ether ether ketone) tube as the supporting substrate, a TpPa-1/layered double hydroxide-coated stir bar was fabricated and demonstrated excellent extraction performance for Sudan dyes. Notably, its extraction efficiency significantly exceeded that of stir bars modified with only TpPa-1 or Ni-Al layered double hydroxide. Based on this innovative coating, a stir bar sorptive extraction-high performance liquid chromatography method was established. This method exhibited low limits of detection (0.04-0.08 ng/mL) for the analysis of Sudan dyes. It also featured a wide linear range (0.25-100 or 200 ng/mL) and demonstrated good repeatability with relative standard deviations ≤6.22%. The recoveries obtained for spiked lake water and chili powder samples were 93.5%-105.2% and 87.8%-100.6%, respectively, demonstrating the practical potential of the developed method for detecting trace Sudan dyes in real samples.

Donor-Acceptor Interactions Enhanced Colorimetric Sensors for Both Acid and Base Vapor Based on Two-Dimensional Covalent Organic Frameworks

Due to the high surface area and uniform porosity of covalent organic frameworks (COFs), they exhibit superior properties in capturing and detecting even trace amounts of gases in the air. However, the COFs materials that possess dual detected functionality are still less reported. Here, an imine-based COF containing thiophene as a donor and triazine as an acceptor to form spatial-distribution-defined D-A structures was prepared. D-A system between thiophene and triazine facilitates the charge transfer process during the protonation process of the imine and the triazine units. The obtained COF exhibits simultaneous sensing ability toward both acidic and alkaline vapors with obvious colorimetric sensing functionality.

Covalent-Frameworked 2D Crown Ether with Chemical Multifunctionality

Here, we present the synthesis and characterization of a novel 2D crystalline framework, named C2O, which mainly consists of carbon and oxygen in a 2:1 molar ratio and features crown ether holes in its skeletal structure. The covalent-frameworked 2D crown ether can be synthesized on a gram-scale and exhibits fine chemical stability in various environments, including acid, base, and different organic solvents. The C2O efficiently activates KI through the strong coordination of K+ with crown ether holes in a rigid framework, which enhances the nucleophilicity of I- and significantly improves its catalytic activity for CO2 fixation with epoxides. The presence of C2O with KI results in remarkable increases in CO2 conversion from 5.7% to 99.9% and from 2.9% to 74.2% for epichlorohydrin and allyl glycidyl ether, respectively. Moreover, C2O possesses both electrophilic and nucleophilic sites at the edge of its framework, allowing for the customization of physicochemical properties by a diverse range of chemical modifications. Specifically, incorporating allyl glycidyl ether (AGE) as an electrophile or ethoxyethylamine (EEA) as a nucleophile into C2O enables the synthesis of C2O-AGE or C2O-EEA, respectively. These modified frameworks exhibit improved conversions of 97.2% and 99.9% for CO2 fixation with allyl glycidyl ether, outperforming unmodified C2O showing a conversion of 74.2%. This newly developed scalable, durable, and customizable covalent framework holds tremendous potential for the design and preparation of outstanding materials with versatile functionalities, rendering them highly attractive for a wide range of applications.

Selective Integrating Molecular Catalytic Units into Bipyridine-Based Covalent Organic Frameworks for Specific Photocatalytic Fuel Production

Molecular metal compounds have demonstrated excellent catalytic activity and product selectivity in the H2 evolution reaction (HER) and the CO2 reduction reaction (CO2RR). The heterogenization of molecular catalysts is regarded as an effective approach to improve their applicability. In this work, the molecular catalytic units [Cp*Ir(Bpy)Cl]+ and [Ru(Bpy)(CO)2Cl2] are constructed in situ on the bipyridine sites of the covalent organic framework for photocatalytic HER and CO2RR, respectively. Inheriting the impressive performance of molecular catalysts, the functionalized TpBpy-M exhibits excellent catalytic activity and product selectivity. Under visible light irradiation, the H2 production rate of TpBpy-Ir is about 760 μmol g-1 h-1, which is 6.7 times higher than that of TpBpy without built-in catalytic sites. Also, the HCOOH production rate of TpBpy-Ru is 271 μmol g-1 h-1, with an impressive selectivity of 88%. Control experiments validated that this improvement is attributed to the incorporation of molecular catalytic units into the framework. Photoluminescence spectroscopy measurements and theoretical calculation consistently demonstrate that, under illumination, the photosensitizer [Ru(Bpy)3]Cl2 is excited and transfers electrons to the catalytic sites in TpBpy-M, which then catalyzes the reduction of H+ and CO2.

New sulfonated covalent organic framework for highly effective As(III) removal from water

The goal of taking out As(III) from water is to reduce the detriment that poisonous metals can do to people and nature. A substance that can absorb As(III), TFPOTDB-SO3H, was made by combining 2,5-diaminobenzenesulfonic acid and 2,4,6-tris-(4-formylphenoxy)-1,3,5-triazine in a reaction that joins molecules together. This substance can adsorb As(III) very well and has excellent qualities like being easy to use again, separate substances, and filter out liquids. At pH = 8 and at room temperature, TFPOTDB-SO3H adsorbed a lot of As(III). It achieved a removal rate of 97.1 % within 10 min and could adsorb up to 344.8 mg/g. A research was conducted to investigate the effect of co-existing anions on the elimination of arsenic. The findings indicated that the presence of anions had a minimal adverse impact, reducing As(III) uptake by approximately 1-7 %. The kinetics of the uptake process were found to be controlled by the quasi-second order kinetic model, while the Langmuir isotherm model validated that the mechanism for As(III) removal was monolayer chemisorption. According to the thermodynamic analysis, the adsorption process was endothermic and occurred spontaneously. Moreover, even after 4 successive adsorption-desorption cycles, the adsorbent preserved a substantial uptake productivity of 88.86 % for As(III). The results collectively indicate that TFPOTDB-SO3H holds considerable promise for the efficient adsorption and elimination of As(III) ions from wastewater.

Janus Quasi-Solid Electrolyte Membranes with Asymmetric Porous Structure for High-Performance Lithium-Metal Batteries

Quasi-solid electrolytes (QSEs) based on nanoporous materials are promising candidates to construct high-performance Li-metal batteries (LMBs). However, simultaneously boosting the ionic conductivity (σ) and lithium-ion transference number (t+) of liquid electrolyte confined in porous matrix remains challenging. Herein, we report a novel Janus MOFLi/MSLi QSEs with asymmetric porous structure to inherit the benefits of both mesoporous and microporous hosts. This Janus QSE composed of mesoporous silica and microporous MOF exhibits a neat Li+ conductivity of 1.5 × 10-4 S cm-1 with t+ of 0.71. A partially de-solvated structure and preference distribution of Li+ near the Lewis base O atoms were depicted by MD simulations. Meanwhile, the nanoporous structure enabled efficient ion flux regulation, promoting the homogenous deposition of Li+. When incorporated in Li||Cu cells, the MOFLi/MSLi QSEs demonstrated a high Coulombic efficiency of 98.1%, surpassing that of liquid electrolytes (96.3%). Additionally, NCM 622||Li batteries equipped with MOFLi/MSLi QSEs exhibited promising rate performance and could operate stably for over 200 cycles at 1 C. These results highlight the potential of Janus MOFLi/MSLi QSEs as promising candidates for next-generation LMBs.

Morphology and size control of an amorphous conjugated polymer network containing quinone and pyrrole moieties via precipitation polymerization

Morphology and size control of insoluble and infusible conjugated polymers are significant for their applications. Development of a precipitation polymerization route without using a surface stabilizer is preferred to control the reaction, morphology, and size. In the present work, precipitation polymerization for an amorphous conjugated polymer network, a new type of polymerized structure containing functional units, was studied for the size and morphology control in the solution phase at low temperature. The random copolymerization of benzoquinone (BQ) and pyrrole (Py) monomers formed microspheres of the BQ-Py network polymers as the precipitates in the solution phase. The particle diameter was controlled in the range of 70 nm and 1 μm by changing the pH of the solution and concentration of the monomers. The resultant nanoparticles were applied to a metal-free electrocatalyst for the hydrogen evolution reaction (HER). The catalytic activity of the BQ-Py nanoparticles was higher than that of the bulk micrometer-sized particles. The results imply that the morphology and size of amorphous conjugated polymer networks can be controlled by precipitation polymerization.

A miniaturized stir bar sorptive dispersive microextraction method for the determination of bisphenols in follicular fluid using a magnetic covalent organic framework

BACKGROUND

Bisphenols, particularly bisphenol A (BPA), are the primary monomers used as additives in the manufacturing of many consumer products. The exposure to these compounds is related to endocrine-disrupting and reproductive effects, among others. For this reason, the development of analytical methods for their determination in biological matrixes is needed to monitor the population exposure to these compounds. Their quantification at ovarian level (i.e., follicular fluid) is interesting for the assessment of the bisphenol content to draw conclusions about infertility problems. However, the background does not meet all requirements by focusing mainly on BPA.

RESULTS

In this work, a miniaturized stir bar sorptive dispersive microextraction (mSBSDME) approach has been developed for the determination of BPA and eight analogues in follicular fluid. In the proposed method, the sample is previously cleaned-up using a zirconia-based solid-phase extraction cartridge, removing proteins and phospholipids, and then subjected to the mSBSDME for the preconcentration of the analytes. For this purpose, a magnetic covalent organic framework was used as sorbent. A Plackett-Burman design was applied to select the significant variables affecting the mSBSDME. Afterwards, the only significant variable (i.e., sorbent amount) was optimized. Under the optimized conditions, the proposed method was properly validated, and satisfactory analytical parameters in terms of linearity (up to 50 ng mL-1), enrichment factors (8.5-14.3), limits of detection in the low ng mL-1 range, and precision (relative standard deviations below 11.5 %) were obtained. Finally, the method was successfully applied to five samples, detecting BPA and other two analogues.

SIGNIFICANCE

This method expands the potential applicability of the mSBSDME to other low-availability complex matrixes, which would otherwise be difficult to analyze. Moreover, it offers a valuable tool for monitoring the female population's exposure to bisphenols with the final aim of evaluating if infertility problems of women might be associated to the exposure to these highly endocrine disrupting compounds.

Pyrene-Based Nanoporous Covalent Organic Framework for Carboxylation of C-H Bonds with CO2 and Value-Added 2-Oxazolidinones Synthesis under Ambient Conditions

The selective carbon capture and utilization (CCU) as a one-carbon (C1) feedstock offers dual advantages for mitigating the rising atmospheric CO2 content and producing fine chemicals/fuels. In this context, herein, we report the application of a porous bipyridine-functionalized, pyrene-based covalent organic framework (Pybpy-COF) for the stable anchoring of catalytic Ag(0) nanoparticles (NPs) and its catalytic investigation for fixation of CO2 to commodity chemicals at ambient conditions. Notably, Ag@Pybpy-COF showed excellent catalytic activity for the carboxylation of various terminal alkynes to corresponding alkynyl carboxylic acids/phenylpropiolic acids via C-H bond activation under atmospheric pressure conditions. Besides, carboxylative cyclization of various propargylic amines with CO2 to generate 2-oxazolidinones, an important class of antibiotics, has also been achieved under mild conditions. This significant catalytic activity of Ag@Pybpy-COF with wide functional group tolerance is rendered by the presence of highly exposed, alkynophilic Ag(0) catalytic sites decorated on the pore walls of high surface area (787 m2 g-1) Pybpy-COF. Further, density functional theory calculations unveiled the detailed mechanistic path of the Ag@Pybpy-COF-catalyzed transformation of CO2 to alkynyl carboxylic acids and 2-oxazolidinones. Moreover, the catalyst showed high recyclability for several cycles of reuse without significant loss in its catalytic activity and structural rigidity. This work demonstrates the promising application of Pybpy-COF for stable anchoring of Ag NPs for successful transformation of CO2 to valuable commodity chemicals at ambient conditions.

Structural Conjugation Tuning in Covalent Organic Frameworks Boosts Charge Transfer and Photocatalysis Performances

Structural conjugation greatly affects the optical and electronic properties of the COF photocatalyst. Herein, we show that 2D hydrazone COFs with either π-extended biphenyl (BPh-COF) or acetylene (AC-COF) frameworks demonstrated distinct charge transfer and photocatalytic performances. The two COFs show good crystallinity and decent porosity as their frameworks are enforced by intra/interlayers hydrogen bonding. However, computational and experimental data reveal that AC-COF managed broader visible-light absorption and narrower optical bandgaps and performed efficient photoinduced charge separation and transfer in comparison with BPh-COF, meaning that the ethynyl skeleton with enhanced planarity better improves the π-conjugation of the whole structure. As a result, AC-COF exhibited an ideal bandgap for rapid oxidative coupling of amines under visible-light irradiation. Furthermore, taking advantage of its better charge transfer properties, AC-COF demonstrated considerable enhanced product conversion and notable functional tolerance for metallaphotocatalytic C-O cross-coupling of a wide range of both aryl bromides and chlorides with alcohols. More importantly, besides being recoverable, AC-COF showcased the previously inaccessible etherification of dihaloarene. This report shows a facile approach for manipulating the structure-activity relationship and paves the way for the development of a COF photocatalyst for solar-to-chemical energy conversion.

In Situ Gelled Covalent Organic Frameworks Electrolyte with Long-Range Interconnected Skeletons for Superior Ionic Conductivity

Covalent organic frameworks (COFs) present an ideal platform for ion transport owing to their tunable and ordered nanochannels at the single-digit scale. However, achieving superior COF-based electrolytes remains challenging because of the mismatch between the intricate synthesis processes of COFs and the battery preparation environment, which makes it difficult to build continuous ion channels and low-impedance electrochemical interfaces for devices. Here, we present an in situ gelation method to produce COF gel electrolytes (CGEs) within liquid carbonate electrolyte, integrating COF synthesis with their applicability in batteries. This method leads to long-range interconnected and highly crystalline skeletons of COFs from a robust precoordination structure between lithium salts of liquid electrolyte and building blocks. By incorporating the lithium affinity groups in the COFs, the developed CGEs show a remarkable 3-fold enhancement in ionic conductivity, reaching up to 10.5 mS cm-1 compared to the corresponding liquid carbonate electrolytes. Furthermore, the CGEs exhibit a low activation energy of 0.068 eV, ensuring efficient ion transport, while demonstrating dendrite-free lithium deposition even after prolonged testing periods exceeding 1800 h. These CGEs exhibit excellent rate performance (reversible capacity up to 101 mAh g-1 at a current density of 3C, 1C = 170 mAh g-1) in Li-LiFePO4 coin cells and reversible cycling under extreme conditions (reversible capacity up to 158 mAh g-1 under folding state at 0.1C) in pouch cells. Importantly, our novel methodology extends beyond lithium-ion systems, as it can also be applied to the synthesis of CGEs utilizing potassium, magnesium, zinc, sodium, and calcium ions.

Breaking Dynamic Behavior in 3D Covalent Organic Framework with Pre-Locked Linker Strategy

Due to their large surface area and pore volume, three-dimensional covalent organic frameworks (3D COFs) have emerged as competitive porous materials. However, structural dynamic behavior, often observed in imine-linked 3D COFs, could potentially unlock their potential application in gas storage. Herein, we showed how a pre-locked linker strategy introduces breaking dynamic behavior in 3D COFs. A predesigned planar linker-based 3,8-diamino-6-phenylphenanthridine (DPP) was prepared to produce non-dynamic 3D JUC-595, as the benzylideneamine moiety in DPP locked the linker flexibility and restricted the molecular bond rotation of the imine linkages. Upon solvent inclusion and release, the PXRD profile of JUC-595 remained intake, while JUC-594 with a flexible benzidine linker experienced crystal transformation due to framework contraction-expansion. As a result, the activated JUC-595 achieved higher surface areas (754 m2 g-1) than that of JUC-594 (548 m2 g-1). Furthermore, improved CO2 and CH4 storages were also seen in JUC-595 compared with JUC-594. Impressively, JUC-595 recorded a high normalized H2 storage capacity that surpassed other reported high-surface area 3D COFs. This works shows important insights on manipulating the structural properties of 3D COF to tune gas storage performance.

In Situ X-ray Scattering Reveals Coarsening Rates of Superlattices Self-Assembled from Electrostatically Stabilized Metal Nanocrystals Depend Nonmonotonically on Driving Force

Self-assembly of colloidal nanocrystals (NCs) into superlattices (SLs) is an appealing strategy to design hierarchically organized materials with promising functionalities. Mechanistic studies are still needed to uncover the design principles for SL self-assembly, but such studies have been difficult to perform due to the fast time and short length scales of NC systems. To address this challenge, we developed an apparatus to directly measure the evolving phases in situ and in real time of an electrostatically stabilized Au NC solution before, during, and after it is quenched to form SLs using small-angle X-ray scattering. By developing a quantitative model, we fit the time-dependent scattering patterns to obtain the phase diagram of the system and the kinetics of the colloidal and SL phases as a function of varying quench conditions. The extracted phase diagram is consistent with particles whose interactions are short in range relative to their diameter. We find the degree of SL order is primarily determined by fast (subsecond) initial nucleation and growth kinetics, while coarsening at later times depends nonmonotonically on the driving force for self-assembly. We validate these results by direct comparison with simulations and use them to suggest dynamic design principles to optimize the crystallinity within a finite time window. The combination of this measurement methodology, quantitative analysis, and simulation should be generalizable to elucidate and better control the microscopic self-assembly pathways of a wide range of bottom-up assembled systems and architectures.

Crystalline porous organic salts

Crystalline porous organic salts (CPOSs), formed by the self-assembly of organic acids and organic bases through ionic bonding, possess definite structures and permanent porosity and have rapidly emerged as an important class of porous organic materials in recent years. By rationally designing and controlling tectons, acidity/basicity (pKa), and topology, stable CPOSs with permanent porosity can be efficiently constructed. The characteristics of ionic bonds, charge-separated highly polar nano-confined channels, and permanent porosity endow CPOSs with unique physicochemical properties, offering extensive research opportunities for exploring their functionalities and application scenarios. In this review, we systematically summarize the latest progress in CPOS research, describe the synthetic strategies for synthesizing CPOSs, delineate their structural characteristics, and highlight the differences between CPOSs and hydrogen-bonded organic frameworks (HOFs). Furthermore, we provide an overview of the potential applications of CPOSs in areas such as negative linear compression (NLC), proton conduction, rapid transport of CO2, selective and rapid transport of K+ ions, atmospheric water harvesting (AWH), gas sorption, molecular rotors, fluorescence modulation, room-temperature phosphorescence (RTP) and catalysis. Finally, the challenges and future perspectives of CPOSs are presented.

Hybrid organic frameworks: Synthesis strategies and applications in photocatalytic wastewater treatment - A review

Hybrid organic framework materials are a class of hierarchical porous crystalline materials that have emerged in recent years, composed of three types of porous crystal materials, namely metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and hydrogen-bonded organic frameworks (HOFs). The combination of various organic framework properties in hybrid organic frameworks generates synergistic effects, which has attracted widespread attention from researchers. The synthesis methods of hybrid organic frameworks are also an intriguing topic, enabling the formation of core-shell heterostructures through epitaxial growth, template conversion, medium growth, or direct combination. These hybrid organic framework materials have demonstrated remarkable performance in the application of photocatalytic wastewater purification and have developed various forms of applications. This article reviews the preparation principles and methods of various hybrid organic frameworks and provides a detailed overview of the research progress of photocatalytic water purification hybrid organic frameworks. Finally, the challenges and development prospects of hybrid organic framework synthesis and their application in water purification are briefly discussed.

Kinetic study of electron transfer process in methyl orange decolorization by shewanella in MFCs with covalent organic frameworks modified anode

As a new electrode material for electrochemical systems, covalent organic framework (COF) materials have been gradually applied to bioelectrochemical systems. In our previous study, the COFBTA-DPPD-rGO composite was synthesized via Schiff-base coupling between benzene-1,3,5-tricarbaldehyde (BTA) and 3,8-diamino-6-phenylphenanthridine (DPPD) on reduced graphene oxide (rGO) at room temperature. Here, COFBTA-DPPD-rGO modified MFC anode was used to assist microorganisms to decolorize methyl orange (MO), and the properties of MFCs were studied. The results showed that compared to the unmodified electrode MFC (28 mA m-2, 4.20 mW m-2) the current density and maximum power density of the anode MFC modified by COFBTA-DPPD-rGO (134.5 mA m-2, 21.78 mW m-2) were increased by 380.3% and 423.6%, respectively. The transferred electron number n and charge transfer coefficient α of the modified COFBTA-DPPD-rGO anode (4 and 0.43) compared to the unmodified electrode (2.4 and 0.38) were increased by 67% and 13%, respectively. The decolorization ratio of MO could reach 90.3% at 10 h. Compared with the unmodified electrode MFC (53.0%), the decolorization ratio and kinetic constant of decolorization process were enhanced by 26% and 372%, respectively. Therefore, COFBTA-DPPD-rGO could be a new choice for applying to the MFCs.

Metal-free 2-isocyanobiaryl-based cyclization reactions: phenanthridine framework synthesis

The development of transition metal-free 2-isocyanobiaryl-based reactions has received much attention due to the widespread presence of phenanthidine frameworks as products in pharmacological chemistry and materials science. This review article focuses on the achievements from 2013 until now in various metal-free catalyzed reactions and discusses challenging mechanisms and features of the transformations.

Polysulfides in Magnesium-Sulfur Batteries

Mg-S batteries hold great promise as a potential alternative to Li-based technologies. Their further development hinges on solving a few key challenges, including the lower capacity and poorer cycling performance when compared to Li counterparts. At the heart of the issues is the lack of knowledge on polysulfide chemical behaviors in the Mg-S battery environment. In this Review, a comprehensive overview of the current understanding of polysulfide behaviors in Mg-S batteries is provided. First, a systematic summary of experimental and computational techniques for polysulfide characterization is provided. Next, conversion pathways for Mg polysulfide species within the battery environment are discussed, highlighting the important role of polysulfide solubility in determining reaction kinetics and overall battery performance. The focus then shifts to the negative effects of polysulfide shuttling on Mg-S batteries. The authors outline various strategies for achieving an optimal balance between polysulfide solubility and shuttling, including the use of electrolyte additives, polysulfide-trapping materials, and dual-functional catalysts. Based on the current understanding, the directions for further advancing knowledge of Mg polysulfide chemistry are identified, emphasizing the integration of experiment with computation as a powerful approach to accelerate the development of Mg-S battery technology.

Superhydrophilic Triazine-Based Covalent Organic Frameworks via Post-Modification of FeOOH Clusters for Boosted Photocatalytic Performance

The triazine-based covalent organic frameworks (tCOF), an intriguing subtype of COFs, are expected as highly promising photocatalysts for various photocatalytic applications owing to their fully conjugated structures and nitrogen-rich skeletons. However, the inherent hydrophobicity and fast recombination of photoexcited electron-hole pairs are two main factors hindering the application of tCOF in practical photocatalytic reactions. Here, a post-synthetic modification strategy to fabricate superhydrophilic tCOF-based photocatalysts is demonstrated by in situ growing FeOOH clusters on TaTz COF (TaTz-FeOOH) for efficient photocatalytic oxidation of various organic pollutants. The strong polar FeOOH endows TaTz-FeOOH with good hydrophilic properties. The well-defined heterogeneous interface between FeOOH and TaTz allows the photoelectrons generated by TaTz to be consumed by Fe (III) to transform into Fe (II), synergistically promoting the separation of holes and the generation of free radicals. Compared with the unmodified TaTz, the optimized TaTz-FeOOH (1%) shows excellent photocatalytic performance, where the photocatalytic degrade rate (k) of rhodamine B is increased by about 12 times, and the degradation rate is maintained at 99% after 5 cycles, thus achieving efficient removal of quinolone antibiotics from water. This study provides a new avenue for the development of COF-based hydrophilic functional materials for a wide range of practical applications.

Regenerable and Highly Stable Two-Dimensional Imine-Based Covalent Organic Framework for Simultaneous Rapid Detection and Adsorption of Cu2+ Ions

The development of efficient fluorescent probes and adsorbents for detecting and removing Cu2+, which pose potential environmental and health risks, is a highly active area of research. However, achieving simultaneously improved fluorescence detection efficiency and enhanced adsorption capacity in a single porous probe remains a significant challenge. In this study, we successfully synthesized a two-dimensional imine-based TAP-COF using 2,4,6-triformylphloroglucinol and tri(4-aminophenyl)amine as raw materials. TAP-COF exhibited excellent properties, including a large specific surface area of 685.65 m2·g-1, exceptional thermal stability (>440 °C), chemical stability, temporal stability, and recyclability. Fluorescence testing revealed that TAP-COF exhibited remarkable specificity and high sensitivity for detecting Cu2+. The fluorescence mechanism, in which the excited state intramolecular proton transfer was impeded by the interaction of Cu2+ with C═O and C-N bonds on TAP-COF upon the addition of Cu2+, was further elucidated through experimental and theoretical methods. Furthermore, the adsorption capacity of TAP-COF toward Cu2+ was investigated, confirming the excellence of TAP-COF as a fluorescent probe and adsorbent for the specific detection and removal of Cu2+. This work holds significant implications for improving environmental and human health concerns associated with Cu2+ contamination.

Recent progress of covalent organic frameworks as attractive materials for solid-phase microextraction: A review

Solid-phase microextraction (SPME) is a green, environmentally friendly, and efficient technique for sample pre-treatment. Covalent organic frameworks (COFs), a class of porous materials formed by covalent bonds, have gained prominence owing to their remarkable attributes, including large specific surface area, tunable pore size, and robust thermal/chemical stability. These characteristics have made COFs highly appealing as potential coatings for SPME fiber over the past decades. In this review, various methods used to prepare SPME coatings based on COFs are presented. These methods encompass physical adhesion, sol-gel processes, in situ growth, and chemical cross-linking strategies. In addition, the applications of COF-based SPME coating fibers for the preconcentration of various targets in environmental, food, and biological samples are summarized. Moreover, not only their advantages but also the challenges they pose in practical applications are highlighted. By shedding light on these aspects, this review aims to contribute to the continued development and utilization of COF materials in the field of sample pretreatment.

Nanoscale engineering of solid-state materials for boosting hydrogen storage

The development of novel materials capable of securely storing hydrogen at high volumetric and gravimetric densities is a requirement for the wide-scale usage of hydrogen as an energy carrier. In recent years, great efforts via nanoscale tuning and designing strategies on both physisorbents and chemisorbents have been devoted to improvements in their thermodynamic and kinetic aspects. Increasing the hydrogen storage capacity/density for physisorbents and chemisorbents and improving the dehydrogenation kinetics of hydrides are still considered a challenge. The extensive and fast development of advanced nanotechnologies has fueled a surge in research that presents huge potential in designing solid-state materials to meet the ultimate U.S. Department of Energy capacity targets for onboard light-duty vehicles, material-handling equipments, and portable power applications. Different from the existing literature, in this review, particular attention is paid to the recent advances in nanoscale engineering of solid-state materials for boosting hydrogen storage, especially the nanoscale tuning and designing strategies. We first present a short overview of hydrogen storage mechanisms of nanoscale engineering for boosted hydrogen storage performance on solid-state materials, for example, hydrogen spillover, nanopump effect, nanosize effect, nanocatalysis, and other non-classical hydrogen storage mechanisms. Then, the focus is on recent advancements in nanoscale engineering strategies aimed at enhancing the gravimetric hydrogen storage capacity of porous materials, reducing dehydrogenation temperature and improving reaction kinetics and reversibility of hydrogen desorption/absorption for metal hydrides. Effective nanoscale tuning strategies for enhancing the hydrogen storage performance of porous materials include optimizing surface area and pore volume, fine-tuning nanopore sizes, introducing nanostructure doping, and crafting nanoarchitecture and nanohybrid materials. For metal hydrides, successful strategies involve nanoconfinement, nanosizing, and the incorporation of nanocatalysts. This review further addresses the points to future research directions in the hope of ushering in the practical applications of hydrogen storage materials.

Ligating Catalytically Active Peptides onto Microporous Polymers: A General Route Toward Specifically-Functional High Surface Area Platforms

A versatile post-synthetic modification strategy to functionalize a high surface area microporous network (MPN-OH) by bio-orthogonal inverse electron-demand Diels-Alder (IEDDA) ligation is presented. While the polymer matrix is modified with a readily accessible norbornene isocyanate (Nor-NCO), a series of functional units presenting the robust asymmetric 1,2,4,5-tetrazine (Tz) allows easy functionalization of the MPN by chemoselective Nor/Tz ligation. A generic route is demonstrated, modulating the internal interfaces by introducing carboxylates, amides or amino acids as well as an oligopeptide d-Pro-Pro-Glu organocatalyst. The MPN-Pz-Peptide construct largely retains the catalytic activity and selectivity in an enantioselective enamine catalysis, demonstrates remarkable availability in different solvents, offers heterogeneous organocatalysis in bulk and shows stability in recycling settings.

Hydrogen Isotope Effect Endows a Breakthrough in Photoluminescent Covalent Organic Frameworks

Luminescent covalent organic frameworks (LCOFs) have emerged as indispensable candidates in various applications due to their greater tunable emitting properties and structural robustness compared to small molecule emitters. An unsolved issue in this area is developing highly luminescent LCOFs of which the nonradiative quenching pathways were suppressed as much as possible. Here, a robust aminal-linked COF (DD-COF) possessing perdeuterated light-emitting monomers was designed and synthesized. The solid-state photoluminescence quantum yield of the DD-COF reaches 81%, significantly outcompeting all state-of-the-art LCOFs reported so far. The exceptional luminescent efficiency is attributed to the inhibition of different pathways of nonradiative decay, especially from bond vibrations where only substitution by a heavier isotope with a lower zero-point vibration frequency works. Furthermore, the prepared deuterated COF not only boosts higher photostability under UV irradiation but also enables superior fluorescence sensing performance for iodine detection compared to nondeuterated COF.

Pd8 Nanocluster with Nonmetal-to-Metal- Ring Coordination and Promising Photothermal Conversion Efficiency

Constructing ambient-stable, single-atom-layered metal-based materials with atomic precision and understanding their underlying stability mechanisms are challenging. Here, stable single-atom-layered nanoclusters of Pd were synthesized and precisely characterized through electrospray ionization mass spectrometry and single-crystal X-ray crystallography. A pseudo-pentalene-like Pd8 unit was found in the nanocluster, interacting with two syn PPh units through nonmetal-to-metal -ring coordination. The unexpected coordination, which is distinctly different from the typical organoring-to-metal coordination in half-sandwich-type organometallic compounds, contributes to the ambient stability of the as-obtained single-atom-layered nanocluster as revealed through theoretical and experimental analyses. Furthermore, quantum chemical calculations revealed dominant electron transition along the horizontal x-direction of the Pd8 plane, indicating high photothermal conversion efficiency (PCE) of the nanocluster, which was verified by the experimental PCE of 73.3 %. Therefore, this study unveils the birth of a novel type of compound and the finding of the unusual nonmetal-to-metal -ring coordination and has important implications for future syntheses, structures, properties, and structure-property correlations of single-atom-layered metal-based materials.

Chemical Sensors Based on Covalent Organic Frameworks

Covalent organic frameworks (COFs) are a type of crystalline porous polymer composed of light elements through strong covalent bonds. COFs have attracted considerable attention due to their unique designable structures and excellent material properties. Currently, COFs have shown outstanding potential in various fields, including gas storage, pollutant removal, catalysis, adsorption, optoelectronics, and their research in the sensing field is also increasingly flourishing. In this review, we focus on COF-based sensors. Firstly, we elucidate the fundamental principles of COF-based sensors. Then, we present the primary application areas of COF-based sensors and their recent advancements, encompassing gas, ions, organic compounds, and biomolecules sensing. Finally, we discuss the future trends and challenges faced by COF-based sensors, outlining their promising prospects in the field of sensing.

Multistate structures in a hydrogen-bonded polycatenation non-covalent organic framework with diverse resistive switching behaviors

The inherent structural flexibility and reversibility of non-covalent organic frameworks have enabled them to exhibit switchable multistate structures under external stimuli, providing great potential in the field of resistive switching (RS), but not well explored yet. Herein, we report the 0D+1D hydrogen-bonded polycatenation non-covalent organic framework (HOF-FJU-52), exhibiting diverse and reversible RS behaviors with the high performance. Triggered by the external stimulus of electrical field E at room temperature, HOF-FJU-52 has excellent resistive random-access memory (RRAM) behaviors, comparable to the state-of-the-art materials. When cooling down below 200 K, it was transferred to write-once-read-many-times memory (WORM) behaviors. The two memory behaviors exhibit reversibility on a single crystal device through the temperature changes. The RS mechanism of this non-covalent organic framework has been deciphered at the atomic level by the detailed single-crystal X-ray diffraction analyses, demonstrating that the structural dual-flexibility both in the asymmetric hydrogen bonded dimers within the 0D loops and in the infinite π-π stacking column between the loops and chains contribute to reversible structure transformations between multi-states and thus to its dual RS behaviors.

Magnetic porous carbon material derived from imine-linked covalent organic frameworks for magnetic solid phase extraction of trace chlorine-containing herbicides in soil

Here, imine-linked covalent organic frameworks coated Fe3O4 microspheres were fabricated and employed as the self-template to prepare magnetic porous carbon material. The magnetic solid phase extraction (MSPE) performance of such magnetic covalent organic frameworks derived porous carbons (CMCOFs) were studied for the first time, and the improved MSPE performance was verified. The variations of chemical and material properties in the carbonization processes were studied, and it was found that the CMCOFs carbonated at 400°C exhibited highest adsorption efficiencies for chlorine-containing herbicides due to the formation of nitrile components at this stage. The CMCOFs retained high adsorption efficiencies (above 90 %) to chlorine-containing herbicides at wide pH range (3-12) and high salt concentration. The CMCOFs-based MSPE coupled with HPLC technique was in good potential for analysis of trace chlorine-containing herbicides in soil samples. Under the optimized conditions, this approach displayed short extraction and elution time (5 and 8 min) and low limits of detection (0.35-5.5 ng/mL) for chlorine-containing herbicides. The recoveries of spiked analytes and the relative standard deviations in real soil samples were 81.86 %-110.9 % and less than 5.92 %, respectively. This study provides an efficient method for the analysis of trace chlorine-containing herbicides in complex samples, as well as give some inspiration on material modulation by controlled carbonization to achieve improved sorption performances.

Reversible modulation of interlayer stacking in 2D copper-organic frameworks for tailoring porosity and photocatalytic activity

The properties of two-dimensional covalent organic frameworks (2D COFs), including porosity, catalytic activity as well as electronic and optical properties, are greatly affected by their interlayer stacking structures. However, the precise control of their interlayer stacking mode, especially in a reversible fashion, is a long-standing and challenging pursuit. Herein, we prepare three 2D copper-organic frameworks, namely JNM-n (n = 7, 8, and 9). Interestingly, the reversible interlayer sliding between eclipsed AA stacking (i.e., JNM-7-AA and JNM-8-AA) and staggered ABC stacking (i.e., JNM-7-ABC and JNM-8-ABC) can be achieved through environmental stimulation, which endows reversible encapsulation and release of lipase. Importantly, JNM-7-AA and JNM-8-AA exhibit a broader light absorption range, higher charge-separation efficiency, and higher photocatalytic activity for sensitizing O2 to 1O2 and O2•- than their ABC stacking isostructures. Consequently, JNM-8-AA deliver significantly enhanced photocatalytic activities for oxidative cross-coupling reactions compared to JNM-8-ABC and other reported homogeneous and heterogeneous catalysts.

Exploration of porous imine-based covalent organic framework for solid-phase extraction of five trace sulfonamides in food samples

In this article, a highly crystalline porous imine-based covalent organic framework was synthesized at room temperature and used as solid-phase extraction (SPE) adsorbent for the purification and enrichment of trace sulfonamides (SAs) from food samples. The structure of the obtained material was characterized and studied in detail. The extraction process was optimized and the final elution was determined by the ultra-high-performance liquid chromatography-quadrupole time of flight mass spectrometry method. Low limits of detection (0.02-0.19 μg/kg) were obtained under optimal conditions, with the recoveries ranging from 70.5% to 105.3% when spiked at different levels. The adsorption process of the material for SAs was fitted by the Langmuir and Freundlich adsorption isotherm model, and the extraction capacity for Nitrofuran metabolites from food samples was also investigated for comparison. The results demonstrated that the framework was a good candidate SPE adsorbent that can be used for the enrichment of drug residues in complex matrix, and the work may provide a systematic study method for the development of porous adsorbents.

Cu2+ coordination-induced in situ photo-to-heat on catalytic sites to hydrolyze β-lactam antibiotics pollutants in waters

For degradation of β-lactam antibiotics pollution in waters, the strained β-lactam ring is the most toxic and resistant moiety to biodegrade and redox-chemically treat among their functional groups. Hydrolytically opening β-lactam ring with Lewis acid catalysts has long been recognized as a shortcut, but at room temperature, such hydrolysis is too slow to be deployed. Here, we found when Cu2+ was immobilized on imine-linked COF (covalent organic framework) (Cu2+/Py-Bpy-COF, Cu2+ load is 1.43 wt%), as-prepared composite can utilize the light irradiation (wavelength range simulated sunlight) to in situ heat anchored Cu2+ Lewis acid sites through an excellent photothermal conversion to open the β-lactam ring followed by a desired full-decarboxylation of hydrolysates. Under 1 W/cm2 simulated sunlight, Cu2+/Py-Bpy-COF powders placed in a microfiltration membrane rapidly cause a temperature rising even to ~211.7 °C in 1 min. It can effectively hydrolyze common β-lactam antibiotics in waters and even antibiotics concentration is as high as 1 mM and it takes less than 10 min. Such photo-heating hydrolysis rate is ~24 times as high as under dark and ~2 times as high as Cu2+ homogenous catalysis. Our strategy significantly decreases the interference from generally coexisting common organics in waters and potential toxicity concerns of residual carboxyl groups in hydrolysates and opens up an accessible way for the settlement of β-lactam antibiotics pollutants by the only energy source available, the sunlight.

Synthesis of COF-SO3H immobilized on manganese ferrite nanoparticles as an efficient nanocomposite in the preparation of spirooxindoles

The synthesis of sulfonamide-functionalized magnetic porous nanocomposites is highly significant in chemistry due to their exceptional properties and potential as catalysts. COFs are a new class of organic porous polymers and have significant advantages such as low density, high chemical and thermal stability, and mechanical strength. Therefore, we decided to synthesize COFs based on magnetic nanoparticles, by doing so, we can also prevent the agglomeration of MnFe2O4. MnFe2O4@COF-SO3H possesses a large specific surface area, supermagnetism, and is acidic, making it an optimal catalyst for organic reactions. This particular catalyst was effectively employed in the green and rapid synthesis of various spiro-pyrano chromenes, while several analytical techniques were utilized to analyze its structural integrity and functional groups. The role of a specific site of MnFe2O4@COF-SO3H was confirmed through different control experiments in a one-pot reaction mechanism. It was determined that MnFe2O4@COF-SO3H acts as a bifunctional acid-base catalyst in the one-pot preparation of spirooxindole derivatives. The formation of a spiro skeleton in the multicomponent reaction involved the construction of three new σ bonds (one C-O bond and two C-C bonds) within a single process. The efficiency of the MnFe2O4@COF-SO3H complex is investigated in the synthesis of spirooxindoles of malononitrile, and various isatins with 1,3-dicarbonyles. The nanocatalyst demonstrated excellent catalytic activity that gave the corresponding coupling products good to excellent yields. Furthermore, the heterogeneous magnetic nanocatalyst used in this study demonstrated recoverability after five cycles with minimal loss of activity.

Enhancing Structure-Property Relationships in Porous Materials through Transfer Learning and Cross-Material Few-Shot Learning

Porous materials have emerged as promising solutions for a wide range of energy and environmental applications. However, the asymmetric development in the field of metal-organic frameworks (MOFs) has led to a data imbalance when it comes to MOFs versus other porous materials such as covalent organic frameworks (COFs), porous polymer networks (PPNs), and zeolites. To address this issue, we introduce PMTransformer (Porous Material Transformer), a multimodal Transformer model pretrained on a vast data set of 1.9 million hypothetical porous materials, including metal-organic frameworks, covalent organic frameworks, porous polymer networks, and zeolites. PMTransformer showcases remarkable transfer learning capabilities, resulting in state-of-the-art performance in predicting various porous material properties. To address the challenge of asymmetric data aggregation, we propose cross-material few-shot learning, which leverages the synergistic effect among different porous material classes to enhance the fine-tuning performance with a limited number of examples. As a proof of concept, we demonstrate its effectiveness in predicting band gap values of COFs using the available MOF data in the training set. Moreover, we established cross-material relationships in porous materials by predicting the unseen properties of other classes of porous materials. Our approach presents a new pathway for understanding the underlying relationships among various classes of porous materials, paving the way toward a more comprehensive understanding and design of porous materials.

Tunable covalent benzo-heterocyclic rings constructed using two-dimensional conjugated polymers for visible-light-driven water splitting

Developing highly efficient, stable, and cost-effective two-dimensional (2D) conjugated polymers (CPs) for overall water splitting (OWS) is critical for producing clean and renewable hydrogen energy, yet it remains a great challenge. Here, we designed eight 2D CPs through the topological assembly of diacetylene and benzene-derived molecular linkers that can offer active sites for hydrogen and oxygen evolution reactions, and explored their structural, electronic, optical, and photocatalytic OWS properties by performing first-principles computations. It is shown that incorporating benzo-heterocyclic rings into CPs can significantly modulate the electronic structures of CPs and broaden the spectral absorption, suitable for visible-light-driven OWS. Remarkably, through a range of screening criteria, including stability, electronic band structures, band edge alignments, and photocatalytic activity, we found that CP-4 based on diacetylene and benzotrifuran can spontaneously trigger the OWS in a neutral environment under its own light-induced bias, eliminating the need for sacrificial agents or cocatalysts. Specifically, the HER active site is primarily located at diacetylene moieties, while the OER active site is mainly concentrated on the benzo-heterocyclic rings. Moreover, the ideal STH efficiency for OWS on CP-4 was estimated to be 13.87%, highlighting its potential as a prospective photocatalyst for large-scale industrial OWS. Our findings open a door to the rational design of novel polymer photocatalysts for OWS.

General Two-Step Method for the Fabrication of Covalent-Organic Framework-Bound Open-Tubular Capillary Columns for High-Resolution Gas Chromatography Separation of Isomers

Covalent organic frameworks (COFs) are promising as stationary phases for gas chromatography (GC). The successful anchoring of COFs to the inner walls of the capillary with good uniformity is an important prerequisite to ensure the excellent separation performance of columns. However, current methods for the fabrication of COF-based capillary columns cannot always meet this requirement when faced with different COFs, which hampers the further development of COF-based GC stationary phases. Here, we show a general two-step method for the fabrication of COF-bound capillary column. The first step enables the formation of uniform amorphous polymer layer on the inner walls of capillary, while the second step allows the facile transformation of the amorphous polymer layer into a highly crystalline COF layer. COF-bound capillary columns with different framework structures were fabricated successfully by the developed two-step method. Impressively, the COF layers bound on the inner walls of these capillary columns showed good uniformity and high crystallinity. More importantly, as an example, the fabricated Tab-DHTA-bound capillary column showed good resolution (R > 1.5) and high column efficiency (700-39,663 plates m-1) for the tested isomers of ethylbenzene, xylene, dichlorobenzene, chlorotoluene, pinene, 1,3-dichloropropene, and propylbenzene with good precision (RSD, run-to-run, n = 5) (retention time, 0.2-0.6%; peak area, 0.5-1.1%; and peak height, 0.5-1.4%). In general, the fabricated Tab-DHTA-bound capillary column exhibited better performance for the separation isomers than commercial columns DB-5 and HP-FFAP. These results indicate that the two-step method is an efficient way to fabricate the COF-bound capillary column with excellent separation performance.