Direct Synthesis of Prussian Blue Nanoparticles in Liposomes Incorporating Natural Ion Channels for Cs+ Adsorption and Particle Size Control

Coordination polymer (CP) nanoparticles (NPs) formed by a self-assembly of organic ligands and metal ions are one of the attractive materials for molecular capture and deliver/release in aqueous media. Control of particle size and prevention of aggregation among CP NPs are important factors for improving their adsorption capability in water. We demonstrate here the potential of a liposome incorporating an antibiotic ion channel as a vessel for synthesizing Prussian blue (PB) NPs, being a typical CP. In the formation of PB NPs within liposomes, the influx rate of Fe²⁺ ions into liposome encapsulated [Fe(CN)₆]^3- through channels was fundamental for the change of NPs' sizes. The optimized PB NP-liposome composite showed higher adsorption capacity of Cs⁺ ions than that of aggregated PB NPs that are prepared without liposome in aqueous media.

Unveiling Cs-adsorption mechanism of Prussian blue analogs: Cs+-percolation via vacancies to complete dehydrated state

Metal hexacyanoferrates (MHCF) or Prussian blue analogs are excellent Cs⁺-adsorbents used for radioactive Cs-decontamination. However, the adsorption mechanism is controversial. To clarify the issue, we quantitatively investigated the Cs-adsorption behaviors of potassium copper hexacyanoferrate (KCuHCF) and A_yCu[Fe(CN)₆]_1−x·zH₂O. To obtain samples having homogeneous chemical composition and particle size, flow systems were used for both synthesis and purification. After sufficient rinsing with water, the range of x stable in aqueous solution in time appropriate for Cs-adsorption was 0.25 < x < 0.50. The relations y = 4 − 2x and z = 10x were also found independent of x, indicating complete dehydration of K⁺ in the crystal. We concluded that the excellent Cs-selectivity of MHCF was not due to difference in free energy of the adsorbed state between K⁺ and Cs⁺ but because of the hydrated state in aqueous solution. We also found that the guiding principle for determining the maximum capacity depended on the chemical composition. In particular, for the range 0.25 < x < 0.35, we propose a new model to understand the suppression of the maximum capacity. In our model, we hypothesize that Cs⁺ could migrate in the crystal only through [Fe(CN)₆]⁴⁻ vacancies. The model reproduced the observed maximum capacity without fitting parameters. The model would also be applicable to other MHCFs, e.g. a little adsorption by soluble Prussian blue. The ion exchange between Cs⁺ and H⁺ occurred only when the implemented K⁺ was small.

Cs⁺ adsorption selectivity caused by hydration energy and percolation theory to evaluate the ion-exchangeable site ratio.

Stabilization of cesium in alkali-activated municipal solid waste incineration fly ash and a pyrophyllite-based system

Environmentally sound treatments are required to dispose of municipal solid waste incineration fly ash (MSWIFA) contaminated with radioactive cesium (Cs) from the Fukushima Daiichi nuclear power plant accident in Japan. This study focuses on the stabilization of Cs using an alkali-activated MSWIFA and pyophyllite-based system. Three composite solid products were synthesized after mixtures of raw materials (dehydrated pyrophyllite, MSWIFA, 14 mol/L aqueous sodium hydroxide, and sodium silicate solution) were cured at 105 °C for 24 h. Three types of MSWIFAs were prepared as raw fly ash, raw fly ash with 0.1% CsCl, and raw fly ash with 40% CsCl to understand the stabilization mechanism of Cs. Cs stabilization in two solid products was successful, with less than 6.9% leaching observed from two types tests, and was partly successful for the solid product with the highest concentration of Cs. X-ray diffraction showed that all of the solid products produced several crystalline phases, and that pollucite was formed in the highest Cs concentration product. The X-ray absorption fine structure and scanning electron microscopy with X-ray analysis suggested that most Cs species formed pollucite in the two solid products from MSWIFA with added CsCl. This system provides a technique for the direct stabilization of Cs in MSWIFA.

Cesium ion detection by terahertz light

Recent developments in terahertz technologies provide new tools for analysis, inspection, and nondestructive sensing. If a heavy atom is encapsulated in a cage of a porous material, the atom should vibrate slowly and resonate with a low-frequency terahertz light. From this perspective, a cyanide-bridged metal framework is a suitable system because it contains many cages that can adsorb Cs ions. Herein we show the vibration mode of a Cs ion in a cage of a cyanide-bridged metal framework. First-principles phonon mode calculations and terahertz time-domain spectroscopy (THz-TDS) measurements indicate that the vibration mode of a Cs ion in a cyanide-bridged manganese-iron framework is at 1.5 THz, which is significantly apart from other lattice vibrations. Taking advantage of this feature, we develop a THz-light detection method for Cs ions, which is useful for non-contact sensing of Cs ions in dangerous environments or harmful circumstances.

Resonant-Gravimetric Identification of Competitive Adsorption of Environmental Molecules

Understanding competitive adsorption relationship among various ambient gases is important in adsorbing-material development for capturing environmentally harmful gas. For example, environmental interfering factors (e.g., moisture) can affect the competitive gas-molecule adsorption that needs to be clarified. Due to a lack of method to quantitatively study the dynamic adsorbing process (e.g., real-time-counting adsorbed molecule number), it is difficult to reveal the competitive adsorption mechanism. Still using conventional "trial-and-error" method hinders the development of high-performance adsorbing materials; thereby new technology is in high demand to address the issue. This study opens up a three-step resonant-gravimetric analysis method by using ultrasensitive resonant cantilevers. The three experimental steps are sequentially for qualitative analysis, quantitative determination, and thermodynamic-level identification about the competitive adsorption relationship among the environmental gas molecules. Previous studies indicate that the zeolitic-imidazolate framework (ZIF) of ZIF-8 nanocrystals has a low affinity to environmental CO₂. This conclusion is confirmed in this study by evaluating ZIF-8 with the three experimental steps, sequentially for qualitative judgment of adsorbability, quantitative determination of hydrous molecule structure in real air, and quantitative extraction of thermodynamic enthalpy, ΔH°. By figuring out the competitive interface-adsorption relationship, we verified that ZIF-8 cannot adsorb CO₂ in real air. However, for the first time, ZIF-8 is identified as an excellent adsorbent to environmental NO₂.

Cesium Removal from Human Blood by Poly(ethylene glycol)-Decorated Prussian Blue Magnetic Nanoparticles

The current oral administration of drugs for cesium (Cs) decorporation treatment are often subject to side effects and low efficiency. Therefore, it is of great significance, yet challenging, to develop novel materials and techniques for efficient removal of Cs from the human body. We report herein a new method for directly removing cesium from blood by poly(ethylene glycol)-decorated Prussian blue magnetic nanoparticles (PEG-PB MNs). The nanoparticles have been successfully synthesized by one-pot hydrothermal reaction. The adsorption of cesium in aqueous solution is a highly selective process and kinetically follows a pseudo-second-order model, which can reach equilibrium with a large capacity of 274.7 mg Cs g^-1 within one hour at 298.15 K. PEG-PB MNs were also efficiently regenerated and reused with high adsorption efficiency after five cycles. The nanoparticles successfully removed cesium ions from human blood with improved biocompatibility. The removal efficiency achieved 64 % in the blood with an initial Cs concentration of 168.4 ppb. This study provides a new approach to directly remove cesium ions from the human body by utilizing biocompatible Prussian blue magnetic nanoparticles.

One Versatile Route to Three-Dimensional Graphene Wrapped Metal Cyanide Aerogels for Enhanced Sodium Ion Storage

Facile and controllable integration of metal cyanides (MCs) into three-dimensional graphene (3DG) with advantageous structures is of fundamental importance for the development of superior MC-based electrode materials for electrochemical energy storage and catalysis. Here a facile and versatile spatially-confined Ostwald ripening strategy was developed to synthesize a series of 3DG wrapped MC aerogels with different compositions, size, and structure based on the chemical instability of MC in the reaction system. Remarkably, the integration of Prussian blue (PB) into 3DG, with such unique architecture, largely improves the rate performance and long-term cycling stability of PB as a cathode material for sodium ion batteries.

Ion-recognizable hydrogels for efficient removal of cesium ions from aqueous environment

At present, selective and efficient removal of cesium ions (Cs⁺) from nuclear waste is of significant importance but still challenging. In this study, an easy-to-get and low-cost hydrogel adsorbent has been developed for effective adsorption and removal of Cs⁺ from aqueous environment. The novel Cs⁺-recognizable poly(acrylic acid-co-benzo-18-crown-6-acrylamide) (poly(AAc-co-B18C6Am)) hydrogel is specifically designed with a synergistic effect, in which the AAc units are designed to attract Cs⁺ via electrostatic attraction and the B18C6Am units are designed to capture the attracted Cs⁺ by forming stable 2:1 "sandwich" complexes. The poly(AAc-co-B18C6Am) hydrogels are simply synthesized by thermally initiated free-radical copolymerization and display excellent Cs⁺ adsorption from commonly coexisting metal ions. Important parameters affecting the adsorption are investigated comprehensively, and the adsorption kinetics and adsorption isotherms are also discussed systematically. The poly(AAc-co-B18C6Am) hydrogels exhibit rapid Cs⁺ adsorption within 30min and the adsorption process is governed by the pseudo-second order model. Adsorption isotherm results demonstrate that the equilibrium data are well fitted by the Langmuir isotherm model, indicating that the Cs⁺ adsorption is probably a monolayer adsorption process. Such Cs⁺-recognizable hydrogel materials based on the host-guest complexation are promising as efficient and feasible candidates for adsorption and removal of radioactive Cs⁺ from nuclear contaminants.

In situ synthesis of Prussian blue nanoparticles within a biocompatible reverse micellar system for in vivo Cs+uptake

A Prussian blue reverse micellar system forin vivoCs⁺uptake exhibiting high efficiency and a significant dose effect.

Three dimensional porous Hofmann clathrate [MIIPtII(CN)4]∞ (M = Co, Ni) synthesized by using postsynthetic reductive elimination

We synthesized cyano-bridged three dimensional metal–organic frameworks [M^II(H₂O)₂Pt^IV(CN)₄Br₂]_∞·n(H₂O) (1: M = Co, 2: M = Ni) with an NbO type topology.

Prussian blue analogue derived magnetic carbon/cobalt/iron nanocomposite as an efficient and recyclable catalyst for activation of peroxymonosulfate

A Prussian blue analogue, cobalt hexacyanoferrate Co₃[Fe(CN)₆]₂, was used for the first time to prepare a magnetic carbon/cobalt/iron (MCCI) nanocomposite via one-step carbonization of Co₃[Fe(CN)₆]₂. The resulting MCCI consisted of evenly-distributed cobalt and cobalt ferrite in a porous carbonaceous matrix, making it an attractive magnetic heterogeneous catalyst for activating peroxymonosulfate (PMS). As Rhodamine B (RhB) degradation was adopted as a model test for evaluating activation capability of MCCI, factors influencing RhB degradation were thoroughly examined, including MCCI and PMS dosages, temperature, pH, salt and radical scavengers. A higher MCCI dosage noticeably facilitated the degradation kinetics, whereas insufficient PMS dosage led to ineffective degradation. RhB degradation by MCCI-activated PMS was much more favorable at high temperatures and under neutral conditions. The presence of high concentration of salt slightly interfered with RhB degradation by MCCI-activated PMS. Through examining effects of radical scavengers, RhB degradation by MCCI-activated PMS can be primarily attributed to sulfate radicals instead of a combination of sulfate and hydroxyl radicals. Compared to Co₃O₄, a typical catalyst for PMS activation, MCCI also exhibited a higher catalytic activity for activating PMS. In addition, MCCI was proven as a durable and recyclable catalyst for activating PMS over multiple cycles without efficiency loss and significant changes of chemical characteristics. These features demonstrate that MCCI, simply prepared from a one-step carbonization of Co₃[Fe(CN)₆]₂ is a promising heterogeneous catalyst for activating PMS to degrade organic pollutants.

AM-DMC-AMPS Multi-Functionalized Magnetic Nanoparticles for Efficient Purification of Complex Multiphase Water System

Complex multiphase waste system purification, as one of the major challenges in many industrial fields, urgently needs an efficient one-step purification method to remove several pollutants simultaneously and efficiently. Multi-functionalized magnetic nanoparticles, Fe3O4@SiO2-MPS-AM-DMC-AMPS, were facilely prepared via a one-pot in situ polymerization of three different functional monomers, AM, DMC, and AMPS, on a Fe3O4@SiO2-MPS core-shell structure. The multi-functionalized magnetic nanoparticles (MNPs) are proven to be a highly effective purification agent for oilfield wastewater, an ideal example of industrial complex multiphase waste system containing cations, anions, and organic pollutants. Excellent overall removal efficiencies for both cations, including K(+), Ca(2+), Na(+), and Mg(2+) of 80.68 %, and anions, namely Cl(-) and SO4 (2-), of 85.18 % along with oil of 97.4 % were shown. The high removal efficiencies are attributed to the effective binding of the functional groups from the selected monomers with cations, anions, and oil emulsions.

Facile synthesis of boehmite/PVA composite membrane with enhanced adsorption performance towards Cr(VI)

A novel boehmite/PVA composite membrane (BPCM) with remarkably enhanced adsorption performance towards Cr(VI) was successfully synthesized from Al(NO3)3·9H2O using HAc as the peptizing agent via a facile sol-gel method. The physicochemical properties of the BPCM, the boehmite powder (BP) without PVA and a commercial boehmite powder (CBP) were comparatively characterized by XRD, TGA-DSC, FT-IR and XPS. Batch adsorption experiments showed that the adsorption performance of the BPCM is much better than those of BP and CBP. Its adsorption process was well described by the pseudo-second-order kinetic model, and its equilibrium data fit the Langmuir isotherm well with a maximum adsorption capacity of 36.41mgg(-1). Its interference adsorption experiment in presence of coexisting anions showed that SO4(2-) and HPO4(2-) have greater effect than those of the Cl(-), F(-), C2O4(2-) and HCO3(-). A three step action mechanism including adsorption of Cr(VI) anions, complexation between Cr(VI) anions and the functional groups on the surface of BPCM, and the reduction of Cr(VI) to Cr(III) was proposed to illustrate the adsorption process. This efficient film could be easily separated after adsorption, exhibiting great potential for the removal of Cr(VI) from aqueous solution, and other fields of environmental remediation.

Self-powered fluorescence display devices based on a fast self-charging/recharging battery (Mg/Prussian blue)

Stimuli-responsive (such as voltage and/or light) fluorescence display systems have attracted particular attention in their promising fields of application. However, there are few examples of self-powered fluorescence display devices. Here we designed and fabricated a self-powered fluorescence display device based on a fast-charging/recharging battery. The specially designed battery was composed of a Prussian blue (PB) cathode and a magnesium metal anode with a high theoretical redox potential difference (∼2.8 V). Moreover, smartly adding a trace amount of NaClO in the electrolyte could realize oxidizing PW to PB ∼480 times faster than when oxidizing without NaClO, leading to the fast self-charging and high power density (maximum power density of 13.34 mW cm^-2, about two to three orders of magnitude larger than previous bio-fuel cells) of the Mg/PB battery. Most importantly, PB was used as not only the cathodic catalyst but also as an electrochromic material, making it possible to construct a self-powered and rechargeable electrochromic fluorescence display with only two electrodes. Besides, fluorescent [Ru(bpy)₃]²⁺-doped silica nanoparticles (Ru@SiO₂), were selected as the fluorescence resonance energy transfer (FRET) donor to match PB (FRET acceptor). To the best of our knowledge, we demonstrated a self-powered and rechargeable electrochromic fluorescence display with only two electrodes for the first time.

Prussian blue type nanoparticles for biomedical applications

Prussian blue type nanoparticles are exciting nano-objects that combine the advantages of molecule-based materials and nanochemistry. Here we provide a short overview focalizing on the recent advances of these nano-objects designed for biomedical applications and give an outlook on the future research orientations in this domain.

Three-dimensional hierarchical Prussian blue composed of ultrathin nanosheets: enhanced hetero-catalytic and adsorption properties

Three-dimensional hierarchical Prussian blue composed of ultrathin nanosheets was successfully synthesized by employing a self-aggregation and oriented attachment strategy. The unique structure highly increases the exposure of micropores and metal sites of Prussian blue to guests, thus significantly enhancing its hetero-catalysis and adsorption properties compared to cubic and commercial counterparts.

A Reliable Hybrid Adsorbent for Efficient Radioactive Cesium Accumulation from Contaminated Wastewater

Cesium (Cs) removal from nuclear liquid wastewater has become an emerging issue for safeguarding public health after the accident at the Fukushima Daiichi Nuclear Power Plant. A novel macrocyclic ligand of o-benzo-p-xylyl-22-crown-6-ether (OBPX22C6) was developed and successfully immobilized onto mesoporous silica for the preparation of hybrid adsorbent. The benzene ring π electron is the part of crown ether of OBPX22C6 for easy orientation of the macrocyclic compound for making the π electron donation with Cs complexation. The potential and feasibility of the hybrid adsorbent as being Cs selective was evaluated in terms of sensitivity, selectivity and reusability. The results clarified that the Cs removal process was rapid and reached saturation within a short time. Considering the effect of competitive ions, sodium (Na) did not markedly affect the Cs adsorption whereas potassium (K) was slightly affected due to the similar ionic radii. However, the oxygen in long ethylene glycol chain in OBPX22C6 was expected to show strong coordination, including Cs-π interaction with Cs even in the presence of the high amount of K and Na. Due to its high selectivity and reusability, significant volume reduction is expected as this promising hybrid adsorbent is used for Cs removal in Fukushima wastewater.

Electrodeposition of Prussian blue films on Ni3Si2O5(OH)4 hollow nanospheres and their enhanced electrochromic properties

Porous PB films were electrodeposited on Ni₃Si₂O₅(OH)₄ hollow nanospheres, resulting in enhanced electrochromic properties due to the coarse substrate.

Application of Prussian blue nanoparticles for the radioactive Cs decontamination in Fukushima region

Cs decontamination efficiencies of the composites of iron hexacyanoferrate nanoparticles were investigated in comparison with commercial Prussian blue and natural zeolite. In pure water solution, the adsorption rate varied with sizes. In ash extract, where Cs adsorbing ability of zeolite was sharply dropped due to its poor selectivity, the impact of coexisting ions was negligible for FeHCF. FeHCF-n11, having the finest primary and secondary particle size, resulted the highest distribution coefficient, which was comparable to the high efficiency analogues, CoHCF or NiHCF. This observation suggested the possibility of preparing the high performance FeHCF by particle size and composition adjustment. FeHCF nanoparticle in bead form was tested for the removal of radioactive Cs in pilot scale. Due to larger secondary particle size, pronounced effect of solution temperature on the Cs adsorption kinetics on FeHCF bead was observed. Adjusting the mass of the adsorbent for the given solution temperature is recommended for achieving high decontamination rate.

Evaluating Prussian blue analogues MII3[MIII(CN)6]2 (MII = Co, Cu, Fe, Mn, Ni; MIII = Co, Fe) as activators for peroxymonosulfate in water

[Fe(CN)₆] and [Co(CN)₆]-based Prussian blue analogues (PBAs) were prepared with various metal ions (i.e., Co, Cu, Fe, Mn and Ni) and evaluated as catalysts to activate an important oxidant, peroxymonosulfate (PMS).

Immobilization of Metal Hexacyanoferrate Ion-Exchangers for the Synthesis of Metal Ion Sorbents--A Mini-Review

Metal hexacyanoferrates are very efficient sorbents for the recovery of alkali and base metal ions (including radionuclides such as Cs). Generally produced by the direct reaction of metal salts with potassium hexacyanoferrate (the precursors), they are characterized by ion-exchange and structural properties that make then particularly selective for Cs(I), Rb(I) and Tl(I) recovery (based on their hydrated ionic radius consistent with the size of the ion-exchanger cage), though they can bind also base metals. The major drawback of these materials is associated to their nanometer or micrometer size that makes them difficult to recover in large-size continuous systems. For this reason many techniques have been designed for immobilizing these ion-exchangers in suitable matrices that can be organic (mainly polymers and biopolymers) or inorganic (mineral supports), carbon-based matrices. This immobilization may proceed by in situ synthesis or by entrapment/encapsulation. This mini-review reports some examples of hybrid materials synthesized for the immobilization of metal hexacyanoferrate, the different conditionings of these composite materials and, briefly, the parameters to take into account for their optimal design and facilitated use.

New faces of porous Prussian blue: interfacial assembly of integrated hetero-structures for sensing applications

Prussian blue (PB), the oldest synthetic coordination compound, is a classic and fascinating transition metal coordination material. Prussian blue is based on a three-dimensional (3-D) cubic polymeric porous network consisting of alternating ferric and ferrous ions, which provides facile assembly as well as precise interaction with active sites at functional interfaces. A fundamental understanding of the assembly mechanism of PB hetero-interfaces is essential to enable the full potential applications of PB crystals, including chemical sensing, catalysis, gas storage, drug delivery and electronic displays. Developing controlled assembly methods towards functionally integrated hetero-interfaces with adjustable sizes and morphology of PB crystals is necessary. A key point in the functional interface and device integration of PB nanocrystals is the fabrication of hetero-interfaces in a well-defined and oriented fashion on given substrates. This review will bring together these key aspects of the hetero-interfaces of PB nanocrystals, ranging from structure and properties, interfacial assembly strategies, to integrated hetero-structures for diverse sensing.

Design of Chitosan-Grafted Carbon Nanotubes: Evaluation of How the -OH Functional Group Affects Cs+ Adsorption

In order to explore the effect of –OH functional groups in Cs⁺ adsorption, we herein used the low temperature plasma-induced grafting method to graft chitosan onto carbon nanotubes (denoted as CTS-g-CNTs), as raw-CNTs have few functional groups and chitosan has a large number of –OH functional groups. The synthesized CTS-g-CNT composites were characterized using different techniques. The effect of –OH functional groups in the Cs⁺ adsorption process was evaluated by comparison of the adsorption properties of raw-CNTs with and without grafting chitosan. The variation of environmental conditions such as pH and contact time was investigated. A comparison of contaminated seawater and simulated groundwater was also evaluated. The results indicated that: (1) the adsorption of Cs⁺ ions was strongly dependent on pH and the competitive cations; (2) for CNT-based material, the –OH functional groups have a positive effect on Cs⁺ removal; (3) simulated contaminated groundwater can be used to model contaminated seawater to evaluate the adsorption property of CNTs-based material. These results showed direct observational evidence on the effect of –OH functional groups for Cs⁺ adsorption. Our findings are important in providing future directions to design and to choose effective material to remedy the removal of radioactive cesium from contaminated groundwater and seawater, crucial for public health and the human social environment.

Porous coordination polymers with ubiquitous and biocompatible metals and a neutral bridging ligand

The design of inexpensive and less toxic porous coordination polymers (PCPs) that show selective adsorption or high adsorption capacity is a critical issue in research on applicable porous materials. Although use of Group II magnesium(II) and calcium(II) ions as building blocks could provide cheaper materials and lead to enhanced biocompatibility, examples of magnesium(II) and calcium(II) PCPs are extremely limited compared with commonly used transition metal ones, because neutral bridging ligands have not been available for magnesium(II) and calcium(II) ions. Here we report a rationally designed neutral and charge-polarized bridging ligand as a new partner for magnesium(II) and calcium(II) ions. The three-dimensional magnesium(II) and calcium(II) PCPs synthesized using such a neutral ligand are stable and show selective adsorption and separation of carbon dioxide over methane at ambient temperature. This synthetic approach allows the structural diversification of Group II magnesium(II) and calcium(II) PCPs.

Inexpensive porous materials synthesized from Group II metals may be useful for industrial applications. Here, the authors demonstrate that neutral bridging ligands can be used for the synthesis of magnesium(II) and calcium(II) porous coordination polymers.

Hard-templating of Prussian blue analogues in mesoporous silica and organosilica

Prussian blue analogues with a chiral nematic superstructure have been prepared by hard templating inside chiral nematic mesoporous silica.

Removal of Radioactive Cesium Using Prussian Blue Magnetic Nanoparticles

Radioactive cesium (¹³⁷Cs) has inevitably become a human concern due to exposure from nuclear power plants and nuclear accident releases. Many efforts have been focused on removing cesium and the remediation of the contaminated environment. In this study, we elucidated the ability of Prussian blue-coated magnetic nanoparticles to eliminate cesium from radioactive contaminated waste. Thus, the obtained Prussian blue-coated magnetic nanoparticles were then characterized and examined for their physical and radioactive cesium adsorption properties. This Prussian blue-coated magnetic nanoparticle-based cesium magnetic sorbent can offer great potential for use in in situ remediation.

²⁰¹Tl⁺-labelled Prussian blue nanoparticles as contrast agents for SPECT scintigraphy

Prussian blue (PB) and its analogues on the nanometric scale are exciting nano-objects that combine the advantages of molecular-based materials and nanochemistry. Herein, we demonstrate that ultra-small PB nanoparticles of 2-3 nm can be easily labelled with radioactive (201)Tl(+) to obtain new nanoprobes as radiotracers for 201-thallium-based imaging.