Mechanistic effects of blending formic acid with ethanol on Pd activity towards formic acid oxidation in acidic media

The direct formic acid fuel cell (DFAFC) is one of the most promising direct liquid fuel cells. Pd is the most active catalyst towards formic oxidation, however, it suffers from CO-like poisoning and instability in acidic media. Blending formic acid with ethanol is known to synergistically enhance the Pt catalytic activity of Pt. However, it has not been studied in the case of Pd. In this study, ethanol/formic acid blends were tested, aiming at understanding the effect of ethanol on the formic acid oxidation mechanism at Pd and how the direct and indirect pathways could be affected. The blends consisted of different formic acid (up to 4 M) and ethanol (up to 0.5 M) concentrations. The catalytic activity of a 40% Pd/C catalyst was tested in 0.1 M H2SO4 + XFA + YEtOH using cyclic voltammetry, while the catalyst resistance to poisoning in the presence and absence of ethanol was tested using chronopotentiometry. The use of these blends is found to not only eliminate the indirect pathway but also slowly decrease the direct pathway activity too. That is believed to be due to the different ethanol adsorption orientations at different potentials. This study should open the door for further studying the oxidation of FA/ethanol blends using different pHs and different Pd-based catalysts.

Anticatalytic Strategies to Suppress Water Electrolysis in Aqueous Batteries

Aqueous electrolytes are the leading candidate to meet the surging demand for safe and low-cost storage batteries. Aqueous electrolytes facilitate more sustainable battery technologies due to the attributes of being nonflammable, environmentally benign, and cost effective. Yet, water's narrow electrochemical stability window remains the primary bottleneck for the development of high-energy aqueous batteries with long cycle life and infallible safety. Water's electrolysis leads to either hydrogen evolution reaction (HER) or oxygen evolution reaction (OER), which causes a series of dire consequences, including poor Coulombic efficiency, short device longevity, and safety issues. These are often showstoppers of a new aqueous battery technology besides the low energy density. Prolific progress has been made in the understanding of HER and OER from both catalysis and battery fields. Unfortunately, a systematic review on these advances from a battery chemistry standpoint is lacking. This review provides in-depth discussions on the mechanisms of water electrolysis on electrodes, where we summarize the critical influencing factors applicable for a broad spectrum of aqueous battery systems. Recent progress and existing challenges on suppressing water electrolysis are discussed, and our perspectives on the future development of this field are provided.

Supported Binary and Ternary Nanoalloy Nanoparticle Catalysts-A Green Processing Approach using the Leidenfrost layer as Nanoreactor

When a nanocarbon substrate is heated between 300 °C and 320 °C that is slightly above the Leidenfrost temperature and subsequently quenched in an aqueous solution containing a mixture of noble metal ions, a high density of nanoalloy nanoparticles (NPs) form on the surface. Large surface areas can be decorated in this way by nanoalloy NPs of the system (Au, Pt, Pd). Both binary AuPt, AuPd and PtPd as well as ternary nanoalloys are obtained. The chemical composition of the nanoalloys can be tuned by varying the ion mixture ratio of the solutions. The simultaneous reduction of the noble metal ions on the surface occurs without the need of any reducing agent, presumably owing to charge transfer from ionized species during the quenching process. The method yields nanocarbon-supported, highly adherent nanoalloy NPs, is materials efficient and cost effective because only the surface is modified with the costly noble metals. The supported nanoalloy NPs are exemplary applied to the electrooxidation of methanol and formic acid in acidic solutions, and show an overall high performance.

Efficient electrocatalytic formic acid oxidation over PdAu-manganese oxide/carbon

Developing high efficient Palladium-metal-based electrocatalysts is of great significance for formic acid oxidation (FAO) reaction. Here, we experimentally synthesize PdAu alloy composited with MnOx electrocatalyst (PdAu-MnOx/C) and illustrate its remarkable FAO performance. By virtue of theory studies, we find that Pd-Au bridges have superior adsorption ability towards HCOO* and oxygen vacancies in MnOx make HCOO* formation from HCOOH easier, synergistically lead to the outstanding FAO performance with specific activity and mass activity of 19.0 mA cm^-2 and 4539 mA mg^-1_Pd+Au respectively, which are 2.6 times and 3.5 times higher than commercial Pd/C. This work shed some light toward development of high-performance Pd-based electrocatalysts for FAO.

PdAgPt Corner-Satellite Nanocrystals in Well-Controlled Morphologies and the Structure-Related Electrocatalytic Properties

The functions of heterogeneous metallic nanocrystals (HMNCs) can be undoubtedly tuned by controlling their morphologies and compositions. As a less-studied kind of HMNCs, corner-satellite multi-metallic nanocrystals (CSMNCs) have great research value in structure-related electrocatalytic performance. In this work, PdAgPt corner-satellite nanocrystals with well-controlled morphologies and compositions have been developed by temperature regulation of a seed-mediated growth process. Through the seed-mediated growth, the morphology of PdAgPt products evolves from Pd@Ag cubes to PdAgPt corner-satellite cubes, and eventually to truncated hollow octahedra, as a result of the expansion of {111} facets in AgPt satellites. The growth of AgPt satellites exclusively on the corners of central cubes is realized with the joint help of Ag shell and moderate bromide, and hollow structures form only at higher reaction temperatures on account of galvanic displacement promoted by the Pd core. In view of the different performances of Pd and Pt toward formic acid oxidation (FAO), this structure-sensitive reaction is chosen to measure electrocatalytic properties of PdAgPt HMNCs. It is proven that PdAgPt CSMNCs display greatly improved activity toward FAO in direct oxidation pathway. In addition, with the help of AgPt heterogeneous shells, all PdAgPt HMNCs exhibit better durability than Pd cubes and commercial Pt.

Recent advances in formic acid electro-oxidation: from the fundamental mechanism to electrocatalysts

Direct formic acid fuel cells have attracted significant attention because of their low fuel crossover, high safety, and high theoretical power density among all the proton-exchange membrane fuel cells. Much effort has been devoted to the study of formic acid oxidation, including the reaction processes and electrocatalysts. However, as a model reaction, the anodic electro-oxidation process of formic acid is still not very clear, especially regarding the confirmation of the intermediates, which is not helpful for the design and synthesis of high-performance electrocatalysts for formic acid oxidation or conducive to understanding the reaction mechanisms of other small fuel molecules. Herein, we briefly review the recent advances in investigating the mechanism of formic acid electro-oxidation and the basic design concepts of formic acid oxidation electrocatalysts. Rather than an exhaustive overview of all aspects of this topic, this mini-review mainly outlines the progress of this field in recent years.

Boosting the electrocatalytic activity of Pd/C by Cu alloying: Insight on Pd/Cu composition and reaction pathway

Tuning composition of Pd-based bimetallic electrocatalysts of high stability and durability is of great importance in energy-related reactions. This study reports the remarkable electrocatalytic performance of carbon-supported bimetallic Pd-Cu alloy nanoparticles (NPs) towards formic acid oxidation (FAO) and oxygen reduction reaction (ORR). Among various bimetallic compositions, Pd₃Cu/C alloy NPs exhibits the best FAO and ORR activity. During FAO reaction, Pd₃Cu/C alloy NPs exhibits a peak with a current density of 28.33 mA cm^-2 and a potential of 0.2 V (vs. Ag/AgCl) which is higher than that of the other PdCu compositions and standard 20 wt% Pd/C catalyst. Meanwhile, the onset potential (-0.09 V), half-wave potential (-0.18 V), limiting current density at 1600 rpm (-4.9 mA cm^-2) and Tafel slope (64 mV dec^-1) values of Pd₃Cu/C alloy NPs validate its superiority over the conventional 20 wt% Pt/C catalyst for ORR. Experimental and DFT studies have confirmed that the enhanced activity can be attributed to the electronic effect that arises after Cu alloying which causes a downshift of Pd d-band center and structural effect that produces highly dispersed NPs over the carbon matrix with high electrochemically active surface area.

Enhanced Formic Acid Oxidation over SnO2-decorated Pd Nanocubes

The formic acid oxidation reaction (FAOR) is one of the key reactions that can be used at the anode of low-temperature liquid fuel cells. To allow the knowledge-driven development of improved catalysts, it is necessary to deeply understand the fundamental aspects of the FAOR, which can be ideally achieved by investigating highly active model catalysts. Here, we studied SnO₂-decorated Pd nanocubes (NCs) exhibiting excellent electrocatalytic performance for formic acid oxidation in acidic medium with a SnO₂ promotion that boosts the catalytic activity by a factor of 5.8, compared to pure Pd NCs, exhibiting values of 2.46 A mg^-1 _Pd for SnO₂@Pd NCs versus 0.42 A mg^-1 _Pd for the Pd NCs and a 100 mV lower peak potential. By using ex situ, quasi in situ, and operando spectroscopic and microscopic methods (namely, transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray absorption fine-structure spectroscopy), we identified that the initially well-defined SnO₂-decorated Pd nanocubes maintain their structure and composition throughout FAOR. In situ Fourier-transformed infrared spectroscopy revealed a weaker CO adsorption site in the case of the SnO₂-decorated Pd NCs, compared to the monometallic Pd NCs, enabling a bifunctional reaction mechanism. Therein, SnO₂ provides oxygen species to the Pd surface at low overpotentials, promoting the oxidation of the poisoning CO intermediate and, thus, improving the catalytic performance of Pd. Our SnO _x -decorated Pd nanocubes allowed deeper insight into the mechanism of FAOR and hold promise for possible applications in direct formic acid fuel cells.

Engineering the morphology of palladium nanostructures to tune their electrocatalytic activity in formic acid oxidation reactions

Pd nanomaterials can be cheaper alternative catalysts for the electrocatalytic formic acid oxidation reaction (FAOR) in fuel cells. The size and shape of the nanoparticles and crystal engineering can play a crucial role in enhancing the catalytic activities of Pd nanostructures. A systematic study on the effect of varying the morphology of Pd nanostructures on their catalytic activities for FAOR is reported here. Palladium nanoparticles (Pd_0D), nanowires (Pd_1D) and nanosheets (Pd_2D) could be synthesized by using swollen liquid crystals as 'soft' templates. Swollen liquid crystals are lyotropic liquid crystals that are formed from a quaternary mixture of a surfactant, cosurfactant, brine and Pd salt dissolved in oil. Pd_1D nanostructures exhibited 2.7 and 19 fold higher current density than Pd_0D and Pd_2D nanostructures in the FAOR. The Pd_1D nanostructure possess higher electrochemically active surface area (ECSA), better catalytic activity, stability, and lower impedance to charge transfer when compared to the Pd_0D and Pd_2D nanostructures. The presence of relatively higher amounts of crystal defects and enriched (100) crystal facets in the Pd_1D nanostructure were found to be the reasons for their enhanced catalytic activities.

Tunable Concave Surface Features of Mesoporous Palladium Nanocrystals Prepared from Supramolecular Micellar Templates

Concave metallic nanocrystals with a high density of low-coordinated atoms on the surface are essential for the realization of unique catalytic properties. Herein, mesoporous palladium nanocrystals (MPNs) that possess various degrees of curvature are successfully synthesized following an approach that relies on a facile polymeric micelle assembly approach. The as-prepared MPNs exhibit larger surface areas compared to conventional Pd nanocrystals and their nonporous counterparts. The MPNs display enhanced electrocatalytic activity for ethanol oxidation when compared to state-of-the-art commercial palladium black and conventional palladium nanocubes used as catalysts. Interestingly, as the degree of curvature increases, the surface-area-normalized activity also increases, demonstrating that the curvature of MPNs and the presence of high-index facets are crucial considerations for the design of electrocatalysts.

Random alloy and intermetallic nanocatalysts in fuel cell reactions

Fuel cells that use small organic molecules or hydrogen as the anode fuel can power clean electric vehicles. From an experimental perspective, the possible fuel cells' electrocatalytic reaction mechanisms are obtained through in situ electrochemical spectroscopy techniques and density functional theory calculations, providing theoretical guidance for further development of novel nanocatalysts. As advanced nanocatalysts for fuel cells' electrochemical reactions, alloy nanomaterials have greatly improved electrocatalytic activity and stability and have attracted widespread attention. Enhanced electrocatalytic performance of alloy nanocatalysts could be closely related to the synergistic effects, such as electronic and strain effects. Depending on the arrangement of atoms, alloys can be classified into random alloy and intermetallic compounds (ordered structure). Intermetallic compounds generally have lower heats of formation and stronger heteroatomic bonding strength relative to the random alloy, resulting in high chemical and structural stability in either full pH solutions or electrochemical tests. Here, we summarize the latest advances and the structure-function relationship of noble metal alloy nanocatalysts, among which Pt-based catalysts are the main ones, as well as comprehensively understand why they significantly affect the electrocatalytic performance of fuel cells. Novel alloy nanocatalysts with a robust three-phase interface to achieve efficient charge and mass transfer can obtain desirable activity and stability in the electrochemical workstation tests, and is expected to acquire a higher power density on fuel cell test systems with harsh test conditions.

Interfacial Pd-O-Ce Linkage Enhancement Boosting Formic Acid Electrooxidation

Metal-support interaction enhancement is critical in the fuel cell catalyst design and fabrication. Herein, taking the Pd@CeO₂ system as an example, we revealed the substrate morphology coupling effect and the thermal annealing-induced Pd-O-Ce linkage enhancement in the improved catalytic capability for formic acid electrooxidation. Three well-defined CeO₂ nanocrystals were employed to support Pd nanoparticles, and the best catalytic performance for formic acid oxidation and anti-CO poisoning ability was found on CeO₂ plates because of the high oxygen vacancy, Ce³⁺, and more Pd-O-Ce linkages resulting from the more edge/corner defects. This interaction of Pd-O-Ce linkages could be largely enhanced by thermal annealing in the N₂ atmosphere, as confirmed by a series of crystal structures, surface chemical state, and Raman analysis because the oxygen vacancies and lattice oxygen resulting from the oxygen atoms leaching from the CeO₂ lattice would trap the mobile Pd nanocrystals by forming strengthened Pd-O-Ce linkages. Due to the high oxygen vacancy and strong Pd-O-Ce linkages, largely increased catalytic activity and stability, catalytic kinetics, and rapid charge transfer were found for all the thermal annealed Pd@CeO₂ catalysts. A nearly 1.93-fold enhancement in the mass activity was achieved on the Pd@CeO₂-plate catalysts demonstrating the significance of Pd-O-Ce linkage enhancement. The formation mechanism of Pd-O-Ce linkage was also probed, and a valid Pd-O-Ce linkage can only be formed in the inert atmosphere because of the reaction between metallic Pd and CeO₂. This finding sheds some light on the more efficient catalyst interface construction and understanding for the fuel cell catalysis via metal-support interaction enhancement.

Enhancement of the performance of Pd nanoclusters confined within ultrathin silica layers for formic acid oxidation

The optimized design of highly active and stable anode electrocatalysts is essential for high performance direct formic acid fuel cells (DFAFCs). Herein, a facile and cost-effective strategy was proposed to fabricate a robust ultrasmall Pd nanocluster confined within ultrathin protective silica layers anchored on nitrogen doped reduced GO (NrGO) through generating amine functionalized graphene oxide with 3-aminopropyl triethoxysilane (APTES), followed by tuning the thickness of protective silica layers by precisely controlling the amount of tetraethylorthosilicate (TEOS). Amine functionalized graphene oxide generated by using APTES favors the formation of ultrasmall Pd nanoclusters due to the coordination of amine to PdCl24- while the confinement effect of ultrathin protective silica layers stabilizes ultrasmall Pd nanoclusters and impedes the agglomeration and sintering of ultrasmall Pd nanoclusters during electrocatalysis. As a result, the ultrasmall Pd nanoclusters (∼1.4 nm) confined in silica layers on NrGO (Pd/NrGO@SiO2) demonstrate a very high forward peak current density for formic acid oxidation (FAO) of 2.37 A mg-1, outperforming the Pd/C catalyst (0.30 A mg-1) and the Pd/rGO catalyst obtained by a conventional method (0.42 A mg-1). More importantly, our confined Pd catalysts show the highest stability of only 5% inconspicuous degradation of the initial mass activity after 1000 cycles, compared with Pd/C (almost 100% loss), Pd/rGO (61.5% loss) and Pd/NrGO (73.2% loss). These strategies in this work provide a new prospect for the design of excellent noble catalysts to overcome the challenges in the practical application of DFAFCs.

Effect of lattice mismatch and shell thickness on strain in core@shell nanocrystals

Bimetallic nanocrystals with a core@shell architecture are versatile, multifunctional particles. The lattice mismatch between core and shell regions induces strain, affecting the electronic properties of the shell metal, which is important for applications in catalysis. Here, we analyze this strain in core@shell nanocubes as a function of lattice mismatch and shell thickness. Coupling geometric phase analysis from atomic resolution scanning transmission electron microscopy images with molecular dynamics simulations reveals lattice relaxation in the shell within only a few monolayers and an overexpansion in the axial direction. Interestingly, many works report core@shell metal nanocatalysts with optimum performance at greater shell thicknesses. Our findings suggest that not strain alone but secondary factors, such as structural defects or structural changes in operando, may account for observed enhancements in some strain-engineered nanocatalysts; e.g., Rh@Pt nanocubes for formic acid electrooxidation.

TiO2 Nanotubes with Pt and Pd Nanoparticles as Catalysts for Electro-Oxidation of Formic Acid

In the present work, the magnetron sputtering technique was used to prepare new catalysts of formic acid electrooxidation based on TiO₂ nanotubes decorated with Pt (platinum), Pd (palladium) or Pd + Pt nanoparticles. TiO₂ nanotubes (TiO₂ NTs) with strictly defined geometry were produced by anodization of Ti foil and Ti mesh in a mixture of glycerol and water with ammonium fluoride electrolyte. The above mentioned catalytically active metal nanoparticles (NPs) were located mainly on the top of the TiO₂ NTs, forming 'rings' and agglomerates. A part of metal nanoparticles decorated also TiO₂ NTs walls, thus providing sufficient electronic conductivity for electron transportation between the metal nanoparticle rings and Ti current collector. The electrocatalytic activity of the TiO₂ NTs/Ti foil, decorated by Pt, Pd and/or Pd + Pt NPs was investigated by cyclic voltammetry (CV) and new Pd/TiO₂ NTs/Ti mesh catalyst was additionally tested in a direct formic acid fuel cell (DFAFC). The results so obtained were compared with commercial catalyst-Pd/Vulcan. CV tests have shown for carbon supported catalysts, that the activity of TiO₂ NTs decorated with Pd was considerably higher than that one decorated with Pt. Moreover, for TiO₂ NTs supported Pd catalyst specific activity (per mg of metal) was higher than that for well dispersed carbon supported commercial catalyst. The tests at DFAFC have revealed also that the maximum of specific power for 0.2 Pd/TiO₂ catalyst was 70% higher than that of the commercial one, Pd/Vulcan. Morphological features, and/or peculiarities, as well as surface composition of the resulting catalysts have been studied by scanning electron microscopy (SEM), scanning transmission electron microscopy (STEM), and chemical surface analytical methods (X-ray photoelectron spectroscopy-XPS; Auger electron spectroscopy-AES).

Development of advanced materials for cleaner energy generation through fuel cells

The use of fuel cells in the transportation sector holds promise as a sustainable option for the generation of cleaner energy along with cumulative lesser GHG emissions.

Phase diagrams and dynamical evolution of the triple-pathway electro-oxidation of formic acid on platinum

A detailed numerical study including stability phase diagrams for the dynamical evolution of the electro-oxidation of formic acid on platinum was reported. The study evidences the existence of intertwined stability phases and the absence of chaos.

Highly Active and Durable Ultrasmall Pd Nanocatalyst Encapsulated in Ultrathin Silica Layers by Selective Deposition for Formic Acid Oxidation

The low performance of palladium (Pd) is a considerable challenge for direct formic acid fuel cells in practical applications. Herein, we develop a simple strategy to synthesize a highly active and durable Pd nanocatalyst encapsulated in ultrathin silica layers with vertically aligned nanochannels covered graphene oxides (Pd/rGO@pSiO₂) without blocking active sites by selective deposition. The Pd/rGO@pSiO₂ catalyst exhibits very high performance for a formic acid oxidation (FAO) reaction compared with the Pd/rGO without protective silica layers and commercial Pd/C catalysts. Pd/rGO@pSiO₂ shows an FAO activity 3.9 and 3.8 times better than those of Pd/rGO and Pd/C catalysts, respectively. The Pd/rGO@pSiO₂ catalysts are also almost 6-fold more stable than Pd/C and more than 3-fold more stable than Pd/rGO. The outstanding performance of our encapsulated Pd catalysts can be ascribed to the novel design of nanostructures by selective deposition fabricating ultrasmall Pd nanoparticles encapsulated in ultrathin silica layers with vertically aligned nanochannels, which not only avoid blocking the active sites but also facilitate the mass transfer in encapsulated catalysts. Our work indicates an important method to the rational design of high-performance catalysts for fuel cells in practical applications.

Synthesis of low- and high-index faceted metal (Pt, Pd, Ru, Ir, Rh) nanoparticles for improved activity and stability in electrocatalysis

Driven by the quest for future energy solution, faceted metal nanoparticles are being pursued as the next generation electrocatalysts for renewable energy applications. Thanks to recent advancement in solution phase synthesis, different low- and high-index facets on metal nanocrystals become accessible and are tested for specific electrocatalytic reactions. This minireview summarises the key approaches to prepare nanocrystals containing the most catalytically active platinum group metals (Pt, Pd, Ru, Ir and Rh) exposed with low- and high-index facets using solution phase synthesis. Electrocatalytic studies related to the different facets are highlighted to emphasise the importance of exposing facets for catalysing these reactions, namely oxygen reduction reaction (ORR), hydrogen oxidation reaction (HOR), alcohol oxidation including methanol (MOR) and ethanol oxidation reactions (EOR), formic acid oxidation reaction (FAOR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The future outlook discusses the challenges and opportunities for making electrocatalysts that are even more active and stable.

Core-shell structured PtRu nanoparticles@FeP promoter with an efficient nanointerface for alcohol fuel electrooxidation

In this study, a bottleneck was overcome for direct alcohol fuel cells using state-of-the-art PtRu catalysts for alcohol fuel oxidation. Herein, a core-shell structured PtRu catalyst system based on the emerging promoter FeP was developed that showed excellent catalytic performance for the oxidation of alcohol fuels. The surface spectrometric analysis and morphology observation confirmed the formation of a nanointerface of the PtRu shell and FeP core hybrid catalyst (PtRu@FeP), and efficient ligand effects and electronic effects were found to result from the noble metal active sites and adjacent promoter in the core-shell structure. The facile formation of oxygen-containing species and the strong electronic effects could activate the Pt active sites, leading to high catalytic performance. High anti-CO poisoning ability was found for this catalyst system when compared with the case of the benchmark commercial PtRu/C catalyst (110 mV less and 60 mV less as evaluated by the peak and onset potentials for CO oxidation, respectively). The PtRu@FeP catalysts also exhibited much higher catalytic activity and stability when compared with commercial and home-made PtRu/C catalysts; specifically, the peak current density of the PtRu@FeP 1 : 1 catalyst was about 2 and 3 times higher than those of the commercial PtRu/C catalyst and home-made PtRu/C for the oxidation of the alcohol fuels methanol and ethanol; moreover, high catalytic efficiency, improved by 2 times, was found, as expressed by the specific activity. Excellent catalytic stability as evaluated by 1000 cycles of cyclic voltammetry measurements was also demonstrated for the PtRu@FeP catalysts. The high catalytic performance could be attributed to the intimate nanointerface contact of the core-shell structured PtRu shell over the FeP core via a bi-functional catalytic mechanism and electronic effects based on the ligand effect in this catalyst system. The current study is a significant step to increase the PtRu catalytic performance via nanointerface construction by a core-shell structure on a novel promoter for direct alcohol fuel cells.

Trimetallic Synergy in Intermetallic PtSnBi Nanoplates Boosts Formic Acid Oxidation

Platinum is the most effective metal for a wide range of catalysis reactions, but it fails in the formic acid electrooxidation test and suffers from severe carbon monoxide poisoning. Developing highly active and stable catalysts that are capable of oxidizing HCOOH directly into CO₂ remains challenging for commercialization of direct liquid fuel cells. A new class of PtSnBi intermetallic nanoplates is synthesized to boost formic acid oxidation, which greatly outperforms binary PtSn and PtBi intermetallic, benefiting from the synergism of chosen three metals. In particular, the best catalyst, atomically ordered Pt₄₅ Sn₂₅ Bi₃₀ nanoplates, exhibits an ultrahigh mass activity of 4394 mA mg^-1 Pt and preserves 78% of the initial activity after 4000 potential cycles, which make it a state-of-the-art catalyst toward formic acid oxidation. Density functional theory calculations reveal that the electronic and geometric effects in PtSnBi intermetallic nanoplates help suppress CO* formation and optimize dehydrogenation steps.

Cu5Pt Dodecahedra with Low-Pt Content: Facile Synthesis and Outstanding Formic Acid Electrooxidation

Tailoring composition and structure are significantly important to improve the utilization and optimize the performance of the precious Pt catalyst toward various reactions, which greatly relies on the feasible synthesis approach. Herein, we demonstrate that Cu-rich Cu₅Pt alloys with unique excavated dodecahedral frame-like structure (Cu₅Pt nanoframes) can be synthesized via simply adjusting the amounts of salt precursors and surfactants under hydrothermal conditions. It is established that the presence of hexamethylenetetramine and cetyltrimethylammonium bromide, as well as the selection of a proper Pt/Cu ratio are key for the acquisition of the target product. The immediate appeal of this material stems from frame-like architecture and ultralow Pt content involved, which can be used to greatly improve the utilization efficiency of Pt atoms. When benchmarked against commercial catalysts, the developed Cu₅Pt nanostructures display superior electrocatalytic performance toward formic acid oxidation, owing to unique electronic effect and ensemble effect. This work elucidates a promising methodology for the synthesis of Pt-based nanostructures while highlights the significance of composition and structure in electrocatalysis.

Effect of Pt Deposits on TiO2 Electrocatalytic Activity Highlighted by Electron Tomography

Characterizing materials at small scales presents major challenges in the engineering of nanocomposite materials having a high specific surface area. Here, we show the application of electron tomography to describe the three-dimensional structure of highly ordered TiO₂ nanotube arrays modified with Pt nanoparticles. The titanium oxide nanotubes were prepared by the electrochemical anodization of a Ti substrate after which Pt was deposited by magnetron sputtering. Such a composite shows high electrochemical activity that depends on the amount of the metal and the morphological parameters of the microstructure. However, a TiO₂ structure modified with metallic nanoparticles has never been visualized in 3D, making it very difficult to understand the relationship between electrocatalytic activity and morphology. In this paper, TiO₂ nanotubes of different sizes and different amounts of Pt were analyzed using the electron microscopy technique. Electrocatalytic activity was studied using the cyclic voltammetry (CV) method. For selected samples, electron tomography 3D structure reconstruction was performed to describe their fine microstructure. The highest activity was detected in the sample having bigger nanotubes (25 V) where the porosity of the structure was high and the Pt content was 0.1 mg cm^-2. 3D imaging using electron tomography opens up new possibilities in the design of electrocatalytic materials.

Formic Acid Oxidation on Pd Thin Film Coated Au Nanocrystals

Cubic, octahedral, and rhombic dodecahedral gold nanocrystals enclosed by {100}, {111}, and {110} facets, respectively, were prepared by a seed-mediated growth method at the room temperature. Palladium thin films were coated on these Au nanocrystals by a redox replacement approach to explore their catalytic activities. It is revealed that formic acid and carbon monoxide oxidation in 0.1 M HClO4 on Au nanocrystals coated with one monolayer (ML) of Pd are facet-dependent and resemble those obtained from corresponding Pd single crystals and Pd films deposited on bulk Au single crystals, suggesting epitaxial growth of Pd overlayers on the Au nanocrystal surfaces. As the Pd film thickness increased, formic acid oxidation current density decreased and the CO oxidation potential moved to more negative. The catalytic activity remained largely unchanged after 3–5 MLs of Pd deposition. The specific adsorption of (bi)sulfate was shown to hinder the formic acid oxidation and the effect decreased with the increasing Pd film thickness. These observations were explained in the framework of the d-band theory. This study highlights the feasibility of engineering high-performance catalysts through deposition of catalytically active metal thin films on facet-controlled inert nanocrystals.