Hybrid nanostructures for SERS: materials development and chemical detection

Magnetite-Supported Gold Nanostars for the Uptake and SERS Detection of Tetracycline

Magnetite nanoparticles (MNPs) decorated with gold nanostars (AuNSs) have been prepared by using a seed growth method without the addition of surfactants or colloidal stabilizers. The hybrid nanomaterials were investigated as adsorbents for the uptake of tetracycline (TC) from aqueous solutions and subsequent detection using surface-enhanced Raman scattering (SERS). Several parameters were investigated in order to optimize the performance of these hybrid platforms on the uptake and SERS detection of TC, including variable pH values and the effect of contact time on the removal of TC. The spatial distribution of TC and AuNS on the hybrid composites was accomplished by coupling SERS analysis with Raman imaging studies, allowing also for the determination of the detection limit for TC when dissolved in ultrapure water (10 nM) and in more complex aqueous matrices (1 μM). Attempts were also made to investigate the adsorption modes of the TC molecules at the surface of the metal NPs by taking into account the enhancement of the Raman bands in these different matrices.

Hybrid Noble-Metals/Metal-Oxide Bifunctional Nano-Heterostructure Displaying Outperforming Gas-Sensing and Photochromic Performances

As nanomaterials are dominating 21st century's scene, multiple functionality in a single (nano)structure is becoming very appealing. Inspired by the Land of the Rising Sun, we designed a bifunctional (gas-sensor/photochromic) nanomaterial, made with TiO₂ whose surface was simultaneously decorated with copper and silver (the Cu/Ag molar ratio being 3:1). This nanomaterial outperformed previous state-of-the-art TiO₂-based sensors for the detection of acetone, as well as the Cu-TiO₂-based photochromic material. It indeed possessed splendid sensitivity toward acetone (detection limit of 100 ppb, 5 times lower than previous state-of-the-art TiO₂-based acetone sensors), as well as reduced response/recovery times at very low working temperature, 150 °C, for acetone sensing. Still, the same material showed itself to be able to (reversibly) change in color when stimulated by both UV-A and, most remarkably, visible light. Indeed, the visible-light photochromic performance was almost 3 times faster compared to the standard Cu-TiO₂ photochromic material-that is, 4.0 min versus 10.8 min, respectively. It was eventually proposed that the photochromic behavior was triggered by different mechanisms, depending on the light source used.

SERS active self-assembled diphenylalanine micro/nanostructures: A combined experimental and theoretical investigation

Enhancing Raman signatures of molecules by self-assembled metal nanoparticles, nanolithography patterning, or by designing plasmonic nanostructures is widely used for detection of low abundance biological systems. Self-assembled peptide nanostructures provide a natural template for tethering Au and Ag nanoparticles due to its fractal surface. Here, we show the use of L,L-diphenylalanine micro-nanostructures (FF-MNSs) for the organization of Ag and Au nanoparticles (Nps) and its potential as surface-enhanced Raman scattering (SERS)-active substrates. The FF-MNSs undergo an irreversible phase transition from hexagonally packed (hex) micro-nanotubes to an orthorhombic (ort) structure at ∼150 °C. The metal Nps form chains on hex FF-MNSs as inferred from transmission electron microscopy images and a uniform non-aggregated distribution in the ort phase. The high luminescence from the ort FF-MNS phase precludes SERS measurements with AgNps. The calculated Raman spectra using density-functional theory shows a higher intensity from rhodamine 6G (R6G) molecule in the presence of an Ag atom bound to ort FF compared with hex FF. The SERS spectra obtained from R6G bound to FF-MNSs with AuNps clearly show a higher enhancement for the ort phase compared with hex FF, corroborating our theoretical calculations. Our results indicate that FF-MNSs both in the hex and ort phases can be used as substrates for the SERS analysis with different metal nanoparticles, opening up a novel class of optically active bio-based substrates.

Surface-Enhanced Raman Scattering Spectral Imaging for the Attomolar Range Detection of Crystal Violet in Contaminated Water

A series of nanocomposites based on polyamide (NL16, PA) filter membranes containing metal nanoparticles (NPs) have been prepared by filtration under reduced pressure of the metal colloids. The ensuing materials were then investigated as substrates for surface-enhanced Raman scattering (SERS) imaging studies envisaging the spectroscopic detection of vestigial organic pollutants dissolved in contaminated water. The organic dye crystal violet (CV) was used here as a model pollutant because it is a hazardous compound present in certain effluent waters. Moreover this compound is well-known for its strong SERS activity, which is clearly advantageous in the context of material development for SERS. Indeed, several preparative strategies were employed to prepare PA-based composites, and the impact on SERS detection was investigated. These include the use of chemical and morphological distinct plasmonic NPs (Ag, Au), a variable metal load and changing the order of addition of the analytical specimens. These studies demonstrate that the parameters employed in the fabrication of the SERS substrates have a strong impact on the Raman signal enhancement. The use of Raman imaging during the fabrication process allows establishing improvements that translate to better performances of the substrates in the analyte detection. The results have been interpreted by considering an integrated set of operational parameters that include the affinity of CV molecules to the substrate, amount and dispersion of NPs in the PA membranes, and the detection method.  Noteworthy the use of SERS analysis assisted with Raman imaging allowed achieving a detection limit for CV as low as 100 aM in ultrapure water and 10 fM in real samples.

Surface plasmon resonance induced enhancement of photoluminescence and Raman line intensity in SnS quantum dot-Sn nanoparticle hybrid structure

In this article, we report on enhancement in photoluminescence and Raman line intensity of SnS quantum dots embedded in a mesh of Sn nanostructures. SnS nanoparticles synthesized by homogenous precipitation method show strong quantum confinement with a band gap of ∼2.7 eV (blue shift of ∼1 eV compared to bulk SnS particles). The optical band gap of SnS quantum dots is controlled by varying the pH (∼0 to 2.25), ageing time (24 to 144 h) and molarity (0 to 2 M) of the precursors. These SnS nanoparticles are embedded in a mesh of Sn nanostructures which are synthesized from tin chloride by using sodium borohydride as reducing agent. The Sn nanostructures have a morphology dependent, tunable surface plasmon resonance (SPR), ranging from UV (∼295 nm) to visible region (∼400 nm) of the electromagnetic spectrum. In the SnS-Sn nanohybrids, the excitons are strongly coupled with plasmons leading to a shift in the excitonic binding energy (∼400 meV). The pure SnS quantum dots have a very weak photoluminescence peak at ∼560 nm and Raman shift of low intensity at 853.08 cm^-1, 1078.17 cm^-1, 1255.60 cm^-1, 1466.91 cm^-1. The coupling of SnS nanoparticles with Sn nanoparticles results in strong exciton-plasmon interactions leading to enhanced photoluminescence and Raman line intensity. The nanohybrids formed using Sn nanosheets whose SPR matches with absorption onset of the SnS nanoparticles shows an enhancement of ∼10⁴ times higher than pure SnS nanoparticles. Thus, Sn nanosheet with surface plasmon resonance in visible region (400 nm) like Au and Ag is a promising material for surface enhanced Raman spectroscopy, plasmon assisted fluorescence imaging and for enhancing the emission intensity of semiconductors with weak emission intensity.

Polymer@gold Nanoparticles Prepared via RAFT Polymerization for Opto-Biodetection

Colloidal gold nanoparticles (Au NPs) have been used in several biological applications, which include the exploitation of size- and shape-dependent Localized Surface Plasmon Resonance (LSPR) in biosensing devices. In order to obtain functional and stable Au NPs in a physiological medium, surface modification and functionalization are crucial steps in these endeavors. Reversible addition-fragmentation chain transfer (RAFT) polymerization meets this need offering the possibility of control over the composition and architecture of polymeric shells coating Au NPs. Furthermore, playing with a careful choice of monomers, RAFT polymerization allows the possibility to design a polymer shell with the desired functional groups aiming at Au based nanocomposites suitable for biorecognition and biotargeting. This review provides important aspects concerning the synthesis and optical properties of Au NPs as well as concepts of RAFT polymerization. Understanding these concepts is crucial to appreciate the chemical strategies available towards RAFT-polymer coated Au core-shell nanostructures, which are here reviewed. Finally, examples of applications in opto-biodetection devices are provided and the potential of responsive "smart" nanomaterials based on such structures can be applied to other biological applications.

Surface enhanced Raman scattering (SERS) in the visible range on scalable aluminum-coated platforms

Combining submicrometer-sized 3D structures with Al roughness for the development of sustainable SERS substrates.

Hydrophobic mediated growth of galvanic-nanobuds from germanium nanowires for a highly tunable SERS substrate

A SERS substrate is fabricated through a scalable process exhibiting suitable hotspot distribution, shelf life, tunability, and biological applications.

Hierarchically-Designed 3D Flower-Like Composite Nanostructures as an Ultrastable, Reproducible, and Sensitive SERS Substrate

Surface-enhanced Raman spectroscopy (SERS) is an attractive tool in the analytical sciences due to its high specificity and sensitivity. Because SERS-active substrates are only available as two-dimensional arrays, the fabrication of three-dimensional (3D) nanostructures allows for an increased number of hot spots in the focus volume, thus further amplifying the SERS signal. Although a great number of fabrication strategies for powerful SERS substrates exist, the generation of 3D nanostructures with high complexity and periodicity is still challenging. For this purpose, we report an easy fabrication technique for 3D nanostructures following a bottom-up preparation protocol. Enzymatically generated silver nanoparticles (EGNPs) are prepared, and the growth of hierarchically-designed 3D flower-like silica-silver composite nanostructures is induced by applying plasma-enhanced atomic layer deposition (PE-ALD) on the EGNPs. The morphology of these nanocomposites can be varied by changes in the PE-ALD cycle number, and a flower height of up to 10 μm is found. Moreover, the metallized (e.g., silver or gold) 3D nanostructures resulting from 135 PE-ALD cycles of silica creation provide highly reproducible SERS signals across the hydrophobic surface. Within this contribution, the morphological studies, optical properties, as well as the SERS response of these metallized silica-silver composite nanostructures applying vitamin B2 as a model analyte are introduced.

Purely Visible-Light-Induced Photochromism in Ag-TiO2 Nanoheterostructures

We report titania nanoheterostructures decorated with silver, exhibiting tuneable photochromic properties for the first time when stimulated only by visible white light (domestic indoor lamp), with no UV wavelengths. Photochromic materials show reversible color changes under light exposure. However, all inorganic photochromic nanoparticles (NPs) require UV light to operate. Conventionally, multicolor photochromism in Ag-TiO₂ films involves a change in color to brownish-gray during UV-light irradiation (i.e., reduction of Ag⁺ to Ag⁰) and a (re)bleaching (i.e., (re)oxidation of Ag⁰ to colorless Ag⁺) upon visible-light exposure. In this work, on the contrary, we demonstrate visible-light-induced photochromism (ranging from yellow to violet) of 1-10 mol % Ag-modified titania NPs using both spectroscopic and colorimetric CIEL*a*b* analyses. This is not a bleaching of the UV-induced color but a change in color itself under exposure to visible light, and it is shown to be a completely different mechanism-driven by the interfacial charge transfer of an electron from the valence band of TiO₂ to that of the Ag_xO clusters that surround the titania-to the usual UV-triggered photochromism reported in titania-based materials. The quantity of Ag or irradiation time dictated the magnitude and degree of tuneability of the color change, from pale yellow to dark blue, with a rapid change visible only after a few seconds, and the intensity and red shift of surface plasmon resonance induced under visible light also increased. This effect was reversible after annealing in the dark at 100 °C/15 min. Photocatalytic activity under visible light was also assessed against the abatement of nitrogen oxide pollutants, for interior use, therefore showing the coexistence of photochromism and photocatalysis-both triggered by the same wavelength-in the same material, making it a multifunctional material. Moreover, we also demonstrate and explain why X-ray photoelectron spectroscopy is an unreliable technique with such materials.

In situ SERS study of surface plasmon resonance enhanced photocatalytic reactions using bifunctional Au@CdS core-shell nanocomposites

Surface plasmon resonance (SPR) has been utilized in many fields, such as surface-enhanced Raman spectroscopy (SERS) and solar energy conversion. Here we developed an Au@CdS core-shell nanostructure, a bifunctional nanoparticle, used as an efficient catalyst for SPR enhanced photocatalytic degradation, and as a substrate for in situ SERS detection of methylene blue (MB) and p-nitrophenol (pNTP). With integration of an Au nanoparticle into a CdS shell, the degradation process was significantly accelerated under 500 nm long-pass (λ > 500 nm) visible light irradiation, which was caused by the injection of hot electrons. Moreover, a highly uniform, monolayer film of Au@CdS nanoparticles (NPs) has been prepared and used as both a SERS substrate and catalyst. The decomposition of MB molecules and nitrogen coupling reaction of pNTP were observed during the 638 nm laser illumination. We demonstrate that a plasmonic core-semiconductor shell nanocomposite can be a promising material for photocatalysis and in situ SERS study.

Use of Polycrystalline Ice for Assembly of Large Area Au Nanoparticle Superstructures as SERS Substrates

It is still a great challenge to develop simple and low-cost methods for preparation of surface-enhanced Raman scattering (SERS) substrates with high sensitivity and reproducibility. Taking advantage of the microstructure of polycrystalline ice, we developed a new method to assemble large area gold nanoparticle (AuNP) superstructures as SERS substrates without external templating and aggregating agent. The assembly was conducted by freezing AuNP colloid at -20 °C, which concentrated AuNPs in the ice veins and produced an AuNP superstructure upon thawing the ice. The AuNP superstructures exhibited high SERS activity with enhancement factors on the order of 7.63 × 10⁷ owing to the high-density hot spots throughout the superstructures. The SERS activity was found to increase with particle size and aggregate size of AuNP superstructures. Besides, the substrates showed good uniformity and reproducibility with relative standard deviations of 11.9% and 12.4%, respectively. The substrates showed long-term stability, maintaining SERS activity over a period of five months without noticeable change in morphology of the superstructures. The substrates was further used for label-free detection of trace Thiram on apple fruit with high sensitivity down to the concentration of 0.28 ng/cm², offering great potential to monitor Thiram levels in foodstuffs and environmental samples.

Continuous fabrication of nanostructure arrays for flexible surface enhanced Raman scattering substrate

Surface-enhanced Raman spectroscopy (SERS) has been a powerful tool for applications including single molecule detection, analytical chemistry, electrochemistry, medical diagnostics and bio-sensing. Especially, flexible SERS substrates are highly desirable for daily-life applications, such as real-time and in situ Raman detection of chemical and biological targets, which can be used onto irregular surfaces. However, it is still a major challenge to fabricate the flexible SERS substrate on large-area substrates using a facile and cost-effective technique. The roll-to-roll ultraviolet nanoimprint lithography (R2R UV-NIL) technique provides a solution for the continuous fabrication of flexible SERS substrate due to its high-speed, large-area, high-resolution and high-throughput. In this paper, we presented a facile and cost-effective method to fabricate flexible SERS substrate including the fabrication of polymer nanostructure arrays and the metallization of the polymer nanostructure arrays. The polymer nanostructure arrays were obtained by using R2R UV-NIL technique and anodic aluminum oxide (AAO) mold. The functional SERS substrates were then obtained with Au sputtering on the surface of the polymer nanostructure arrays. The obtained SERS substrates exhibit excellent SERS and flexibility performance. This research can provide a beneficial direction for the continuous production of the flexible SERS substrates.

Facile fabrication of silver nanoparticle-coated silica-C18 core–shell microspheres and their applications in SERS detection

We present a one-step method to prepare silver nanoparticle (Ag NP) shell coated functional microspheres as a surface-enhanced Raman scattering (SERS) substrate.

Janus nanoparticles inside polymeric materials: interfacial arrangement toward functional hybrid materials

Recent advances and successes in interfacial behavior of Janus NPs at interfaces are summarized, with the hope to motivate additional efforts in the studies of Janus NPs in polymer matrix for the design of functional hybrid nanostructures and devices with engineered, desired and tailored properties for real-life applications.

Long-range surface plasmon resonance and surface-enhanced Raman scattering on X-shaped gold plasmonic nanohole arrays

X-shaped gold plasmonic nanohole arrays embedded in refractive index-matched dielectric media are designed and optimized as a long-range SERS substrate.

Tunable Electromagnetic Enhancement of Gold Nanoparticle Arrays

In this paper, triblock copolymer polyisoprene-block-polystyrene-block-poly(2-vinylpyridine) (PI-b-PS-b-P2VP) micelles containing HAuCl4 were spin-coated on silicon wafers followed by calcination to form gold nanoparticle arrays. Subsequently the surface optical performances of poly(3-hexylthiophene) (P3HT)-coated Au nanoparticle arrays were investigated. The particle size and the interparticle distance of the gold nanoparticle arrays could be controlled by adjusting the molar ratio of HAuCl4 precursor to vinyl pyridine units in PI-b-PS-b-P2VP and the spin speed during spin-coating. The results demonstrated that Au nanoparticle arrays with large nanoparticle size were able to produce strong electromagnetic field enhancement. Furthermore, the ratio of average particle size to average interparticle distance increased with decreasing spin speed, resulting in strong electromagnetic field enhancement for metal-enhanced fluorescence (MEF) and surface-enhanced Raman scattering (SERS).

Silica nanoparticle based techniques for extraction, detection, and degradation of pesticides

Silica nanoparticles (SiNPs) find applications in the fields of drug delivery, catalysis, immobilization and sensing. Their synthesis can be mediated in a facile manner and they display broad range compatibility and stability. Their existence in the form of spheres, wires and sheets renders them suitable for varied purposes. This review summarizes the use of silica nanostructures in developing techniques for extraction, detection and degradation of pesticides. Silica nanostructures on account of their sorbent properties, porous nature and increased surface area allow effective extraction of pesticides. They can be modified (with ionic liquids, silanes or amines), coated with molecularly imprinted polymers or magnetized to improve the extraction of pesticides. Moreover, they can be altered to increase their sensitivity and stability. In addition to the analysis of pesticides by sophisticated techniques such as High Performance Liquid Chromatography or Gas chromatography, silica nanoparticles related simple detection methods are also proving to be effective. Electrochemical and optical detection based on enzymes (acetylcholinesterase and organophosphate hydrolase) or antibodies have been developed. Pesticide sensors dependent on fluorescence, chemiluminescence or Surface Enhanced Raman Spectroscopic responses are also SiNP based. Moreover, degradative enzymes (organophosphate hydrolases, carboxyesterases and laccases) and bacterial cells that produce recombinant enzymes have been immobilized on SiNPs for mediating pesticide degradation. After immobilization, these systems show increased stability and improved degradation. SiNP are significant in developing systems for effective extraction, detection and degradation of pesticides. SiNPs on account of their chemically inert nature and amenability to surface modifications makes them popular tools for fabricating devices for 'on-site' applications.

Microwave-assisted green synthesis of superparamagnetic nanoparticles using fruit peel extracts: surface engineering, T 2 relaxometry, and photodynamic treatment potential

Superparamagnetic iron oxide nanoparticles (SPIONs) have the potential to be used as multimodal imaging and cancer therapy agents due to their excellent magnetism and ability to generate reactive oxygen species when exposed to light. We report the synthesis of highly biocompatible SPIONs through a facile green approach using fruit peel extracts as the biogenic reductant. This green synthesis protocol involves the stabilization of SPIONs through coordination of different phytochemicals. The SPIONs were functionalized with polyethylene glycol (PEG)-6000 and succinic acid and were extensively characterized by X-ray diffraction analysis, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, atomic force microscopy, Rutherford backscattering spectrometry, diffused reflectance spectroscopy, fluorescence emission, Fourier-transform infrared spectroscopy, ultraviolet-visible spectroscopy, and magnetization analysis. The developed SPIONs were found to be stable, almost spherical with a size range of 17-25 nm. They exhibited excellent water dispersibility, colloidal stability, and relatively high R 2 relaxivity (225 mM(-1) s(-1)). Cell viability assay data revealed that PEGylation or carboxylation appears to significantly shield the surface of the particles but does not lead to improved cytocompatibility. A highly significant increase of reactive oxygen species in light-exposed samples was found to play an important role in the photokilling of human cervical epithelial malignant carcinoma (HeLa) cells. The bio-SPIONs developed are highly favorable for various biomedical applications without risking interference from potentially toxic reagents.

Disordered array of Au covered Silicon nanowires for SERS biosensing combined with electrochemical detection

We report on highly disordered array of Au coated silicon nanowires (Au/SiNWs) as surface enhanced Raman scattering (SERS) probe combined with electrochemical detection for biosensing applications. SiNWs, few microns long, were grown by plasma enhanced chemical vapor deposition on common microscope slides and covered by Au evaporated film, 150 nm thick. The capability of the resulting composite structure to act as SERS biosensor was studied via the biotin-avidin interaction: the Raman signal obtained from this structure allowed to follow each surface modification step as well as to detect efficiently avidin molecules over a broad range of concentrations from micromolar down to the nanomolar values. The metallic coverage wrapping SiNWs was exploited also to obtain a dual detection of the same bioanalyte by electrochemical impedance spectroscopy (EIS). Indeed, the SERS signal and impedance modifications induced by the biomolecule perturbations on the metalized surface of the NWs were monitored on the very same three-electrode device with the Au/SiNWs acting as both working electrode and SERS probe.

Grafting PMMA Brushes from α-Alumina Nanoparticles via SI-ATRP

Alumina nanoparticles are widely used as nanofillers for polymer nanocomposites. Among several different polymorphs of alumina, α-alumina has the most desirable combination of physical properties. Hence, the attachment of polymer chains to α-alumina to enhance compatibility in polymeric matrixes is an important goal. However, the chemical inertness and low concentration of surface hydroxyl groups have rendered polymer modification of α-alumina a long-standing challenge. Herein, we report that activation of α-alumina in concentrated or molten NaOH as well as in molten K2S2O7 increased polymer graft density up to 50%, thereby facilitating the synthesis of α-alumina brush particles with uniform grafting density of 0.05 nm(-2) that are readily miscible or dispersible in organic solvents or in chemically compatible polymeric hosts.