Origin of the giant thermal enhancement of the Er3+ ion's 4I9/2-4I15/2 photoluminescence

The Er³⁺ ion's ⁴I_9/2-⁴I_15/2 emission spectrum, which was rarely reported before, was successfully observed in the as-prepared scheelite-structured CaWO₄:Yb³⁺,Er³⁺ phosphors, upon excitation at 980 nm. This photoluminescence, peaking at ca. 800 nm, was found to undergo a monotonous and giant enhancement with increasing the temperature from 333 to 813 K. Its dependence on pump power revealed that this emission spectrum was from one-photon pumping mechanism. Together with the analysis on luminescence intensity ratio thermometry, it was confirmed that the giant enhancement of the 800 nm emission spectrum was most likely to come from the adjacent lower ⁴I_11/2 state via a thermally coupled way.

Enhanced UV Light Emission by Core-Shell Upconverting Particles Powering up TiO2 Photocatalysis in Near-Infrared Light

The core-shell NaYb0.99F4:Tm0.01@NaYF4 upconverting particles (UCPs) with a high UV emission to apply in NIR-driven photocatalysis were synthesized. The influence of the Yb3+ doping concentration in NaYxF4:Yb0.99−xTm0.01 core particles, and the role of the NaYF4 shell on the upconversion emission intensity of the UCPs were studied. The absorption of NIR light by the obtained UCPs was maximized by increasing the Yb3+ concentration in the core, reaching the maximum for Y3+-free particles (NaYb0.99F4:Tm0.01). Additionally, covering the NaYb0.99F4:Tm0.01 core with a protective layer of NaYF4 minimized the surface luminescence quenching, which significantly improved the efficiency of upconversion emission. The high intensity of the UV light emitted by the NaYb0.99F4:Tm0.01@NaYF4 under NIR irradiation resulted in a high photocatalytic activity of TiO2 (P25) mixed with the synthesized material.

Water-Dispersible Triplet-Triplet Annihilation Photon Upconversion Particle: Molecules Integrated in Hydrophobized Two-Dimensional Interlayer Space of Montmorillonite and Their Application for Photocatalysis in the Aqueous Phase

Green incident light (λ = ∼500 nm) is converted to blue light (λ = 400-450 nm) in air using bulky alkylammonium (DMDOA⁺), 9,10-diphenylanthracene (DPA), and Ru(dmb)₃²⁺ (dmb = 4,4'-dimethyl-2,2'-bipyridine) intercalated in a layered clay compound called "montmorillonite" [MMT-DMDOA⁺-DPA-Ru(dmb)₃²⁺]. The two-dimensional interstitial space has an interlayer spacing of a few nanometers. Emitter DPA is present in this interlayer spacing, having an intermolecular distance of approximately 3.0 nm at a high concentration. Sensitizer Ru(dmb)₃²⁺ is relatively dilute, having an intermolecular distance of 47 nm. The emission decay measurements and quantitative evaluation of the emission intensity demonstrate that blue light emission is induced by sequential processes, which consist of a triplet-triplet (T-T) energy transfer reaction from Ru(dmb)₃²⁺ to DPA and T-T annihilation of DPA molecules. From thermogravimetry and Fourier transform infrared spectra measurements, we observe that the cointercalated alkylammonium acts as a waterproof agent to prevent quenching of the molecules in the excited triplet states by H₂O. Finally, we demonstrate a photocatalytic decomposition of Rhodamine B dissolved in H₂O-containing MMT-DMDOA⁺-DPA-Ru(dmb)₃²⁺ and Pt-deposited WO₃ photocatalyst, where wavelength of incident light (λ > 440 nm) is longer than the absorption edge of WO₃ photocatalyst. The mechanism of photocatalytic decomposition is the following: (i) the incident long wavelength light is upconverted to 400-450 nm light by MMT-DMDOA⁺-DPA-Ru(dmb)₃²⁺, and then, (ii) WO₃ photocatalyst is excited by the generated 400-450 nm light, and finally, (iii) Rhodamine B is decomposed on the Pt cocatalyst induced by the holes in a valence band of WO₃.

Advances in nanomaterials for photodynamic therapy applications: Status and challenges

Photodynamic therapy (PDT), as a non-invasive therapeutic modality that is alternative to radiotherapy and chemotherapy, is extensively investigated for cancer treatments. Although conventional organic photosensitizers (PSs) are still widely used and have achieved great progresses in PDT, the disadvantages such as hydrophobicity, poor stability within PDT environment and low cell/tissue specificity largely limit their clinical applications. Consequently, nano-agents with promising physicochemical and optical properties have emerged as an attractive alternative to overcome these drawbacks of traditional PSs. Herein, the up-to-date advances in the fabrication and fascinating applications of various nanomaterials in PDT have been summarized, including various types of nanoparticles, carbon-based nanomaterials, and two-dimensional nanomaterials, etc. In addition, the current challenges for the clinical use of PDT, and the corresponding strategies to address these issues, as well as future perspectives on further improvement of PDT have also been discussed.

Rare-earth-containing perovskite nanomaterials: design, synthesis, properties and applications

As star material, perovskites have been widely used in the fields of optics, photovoltaics, electronics, magnetics, catalysis, sensing, etc. However, some inherent shortcomings, such as low efficiency (power conversion efficiency, external quantum efficiency, etc.) and poor stability (against water, oxygen, ultraviolet light, etc.), limit their practical applications. Downsizing the materials into nanostructures and incorporating rare earth (RE) ions are effective means to improve their properties and broaden their applications. This review will systematically summarize the key points in the design, synthesis, property improvements and application expansion of RE-containing (including both RE-based and RE-doped) halide and oxide perovskite nanomaterials (PNMs). The critical factors of incorporating RE elements into different perovskite structures and the rational design of functional materials will be discussed in detail. The advantages and disadvantages of different synthesis methods for PNMs will be reviewed. This paper will also summarize some practical experiences in selecting suitable RE elements and designing multi-functional materials according to the mechanisms and principles of REs promoting the properties of perovskites. At the end of this review, we will provide an outlook on the opportunities and challenges of RE-containing PNMs in various fields.

Efficient modulation of upconversion luminescence in NaErF4-based core–shell nanocrystals

Efficient modulation of upconversion luminescence in heavily-doped core–shell nanocrystals by the tuning of [F]/[RE] ratio during synthesis.

A Luminescent Amine-Functionalized Metal-Organic Framework Conjugated with Folic Acid as a Targeted Biocompatible pH-Responsive Nanocarrier for Apoptosis Induction in Breast Cancer Cells

Folic acid amine-functionalized metal-organic framework (FOLA@NH₂-Eu:TMU-62) with luminescent properties loaded with 5-fluorouracil (5-Fu), as an anticancer medication, was used to construct a new cancer targeted drug delivery system in the present study. The 5-Fu release from this targeted carrier along with MTT assay and trypan blue dye exclusion test results also exhibited pH-controlled characteristics of the given carrier in acidic environments, which is very suitable for targeting solid tumors. Then, the inhibitory action of 5-Fu-loaded FOLA@NH₂-Eu:TMU-62 for Michigan Cancer Foundation-7 (MCF7) cell migration was explored according to scratch wound healing assays. Based on the results, the FOLA@NH₂-Eu:TMU-62 carrier was not toxic for MCF-10A normal cells, but it was significantly toxic for MCF-7 breast cancer ones, revealing that the FOLA@NH₂-Eu:TMU-62 carrier could be utilized in accurate cancer treatments through apoptotic pathways with higher reactive oxygen species compared with 5-Fu alone. This cancer-targeted design of FOLA@NH₂-Eu:TMU-62 could thus pave the way for synergistic effects of targeting as well as organized release capabilities.

Optically Active Nanomaterials for Bioimaging and Targeted Therapy

Non-invasive tracking for monitoring the selective delivery and transplantation of biotargeted agents in vivo has been employed as one of the most effective tools in the field of nanomedicine. Different nanoprobes have been developed and applied to bioimaging tissues and the treatment of diseases ranging from inflammatory and cardiovascular diseases to cancer. Herein, we will review the recent advances in the development of optics-responsive nanomaterials, including organic and inorganic nanoparticles, for multimodal bioimaging and targeted therapy. The main focus is placed on nanoprobe fabrication, mechanistic illustrations, and diagnostic, or therapeutical applications. These nanomedicine strategies have promoted a better understanding of the biological events underlying diverse disease etiologies, thereby facilitating diagnosis, illness evaluation, therapeutic effect, and drug discovery.

Intrinsic Time-Tunable Emissions in Core-Shell Upconverting Nanoparticle Systems

Color-tunable luminescence has been extensively investigated in upconverting nanoparticles for diverse applications, each exploiting emissions in different spectral regions. Manipulation of the emission wavelength is accomplished by varying the composition of the luminescent material or the characteristics of the excitation source. Herein, we propose core-shell β-NaGdF₄ : Tm³⁺ , Yb³⁺ /β-NaGdF₄ : Tb³⁺ nanoparticles as intrinsic time-tunable luminescent materials. The time dependency of the emission wavelength only depends on the different decay time of the two emitters, without additional variation of the dopant concentration or pumping source. The time-tunable emission was recorded with a commercially available camera. The dynamics of the emissions is thoroughly investigated, and we established that the energy transfer from the ¹ D₂ excited state of Tm³⁺ ions to the higher energy excited states of Tb³⁺ ions to be the principal mechanism to the population of the ⁵ D₄ level for the Tb³⁺ ions.

Selective cellular imaging with lanthanide-based upconversion nanoparticles

Upconversion nanoparticles (UCNPs) with sodium yttrium fluoride, NaYF4 (host lattice) doped with Yb3+ (sensitizer) and Er3+ (activator) were synthesized via hydrothermal route incorporating polyethyleneimine (PEI) for their long-term stability in water. The cationic PEI-modified UCNPs with diameter 20 ± 4 nm showed a zeta potential value of +36.5 mV and showed an intense, visible red luminescence and low-intensity green emission with 976 nm laser excitation. The particles proven to be nontoxic to endothelial cells, with a 3-(4,5-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide (MTT) assay, showing 90% to 100% cell viability, across a wide range of UCNP concentrations (0.3 ng/mL-0.3 mg/mL) were used in multiphoton imaging. Multiphoton cellular imaging and emission spectroscopy data reported here prove that the UCNPs dispersed in cell culture media are predominantly concentrated in the cytoplasm than the cell nucleus. The energy transfer from PEI-coated UCNPs to surrounding media for red luminescence in the biological system is also highlighted with spectroscopic measurements. Results of this study propose that UCNPs can, therefore, be used for cytoplasm selective imaging together with multiphoton dyes (eg, 4',6-diamidino-2-phenylindole (DAPI)) that are selective to cell nucleus.

Microgels in biomaterials and nanomedicines

Microgels are colloidal particles with crosslinked polymer networks and dimensions ranging from tens of nanometers to micrometers. Specifically, smart microgels are fascinating capable of responding to biological signals in vivo or remote triggers and making the possible for applications in biomaterials and biomedicines. Therefore, how to fundamentally design microgels is an urgent problem to be solved. In this review, we put forward our important fundamental opinions on how to devise the intelligent microgels for cancer therapy, biosensing and biological lubrication. We focus on the design ideas instead of specific implementation process by employing reverse synthesis analysis to programme the microgels at the original stage. Moreover, special insights will be, for the first time, as far as we know, dedicated to the particles completely composed of DNA or proteins into microgel systems. These are discussed in detail in this review. We expect to give readers a broad overview of the design criteria and practical methodologies of microgels according to the application fields, as well as to propel the further developments of highly interesting concepts and materials.

Two-Dimensional and Three-Dimensional Single Particle Tracking of Upconverting Nanoparticles in Living Cells

Lanthanide-doped upconversion nanoparticles (UCNPs) are inorganic nanomaterials in which the lanthanide cations embedded in the host matrix can convert incident near-infrared light to visible or ultraviolet light. These particles are often used for long-term and real-time imaging because they are extremely stable even when subjected to continuous irradiation for a long time. It is now possible to image their movement at the single particle level with a scale of a few nanometers and track their trajectories as a function of time with a scale of a few microseconds. Such UCNP-based single-particle tracking (SPT) technology provides information about the intracellular structures and dynamics in living cells. Thus far, most imaging techniques have been built on fluorescence microscopic techniques (epifluorescence, total internal reflection, etc.). However, two-dimensional (2D) images obtained using these techniques are limited in only being able to visualize those on the focal planes of the objective lens. On the contrary, if three-dimensional (3D) structures and dynamics are known, deeper insights into the biology of the thick cells and tissues can be obtained. In this review, we introduce the status of the fluorescence imaging techniques, discuss the mathematical description of SPT, and outline the past few studies using UCNPs as imaging probes or biologically functionalized carriers.

Probing Energy Migration through Precise Control of Interfacial Energy Transfer in Nanostructure

A novel mechanistic strategy for probing the energy migration through constructing the interfacial energy transfer (IET) in a core-shell-shell nanostructure is reported. In this design, the trilayer nanostructure is composed of a sensitizing core, a migratory interlayer, and a detective shell layer that interact with each other only by IET and the latter two shell layers are nonresponsive to the incident irradiation. This model is well applied in investigating the energy migration over the Tb, Gd, and Yb sublattices, and the results show that the Gd sublattice holds the best energy migratory performance. Moreover, the finding of energy migration over the Yb sublattice enables the 808 nm excited long-lived upconversion of Tb³⁺ and Eu³⁺ , which exhibits unique time-gating performance for information security. The results provide a facile and powerful nanosized model for an in-depth understanding of the fundamentals involving lanthanide interactions, which will further help excite new chances for the frontier applications of lanthanide-based luminescent materials.

Highly efficient upconversion luminescence of Er heavily doped nanocrystals through 1530 nm excitation

Improving luminescence efficiency is of vital importance for applications of rare-earth-doped upconversion materials. Herein, we present highly efficient upconversion nanocrystal, which is brighter than the state-of-the-art Er³⁺/Yb³⁺ co-doped core-shell material, through Er³⁺ heavily doping and 1530 nm excitation. Moreover, upconversion characteristics and mechanisms of Er³⁺ heavily doped core nanocrystals and their core-shell counterparts are investigated carefully.

Rare Earth Hydroxide as a Precursor for Controlled Fabrication of Uniform β-NaYF₄ Nanoparticles: A Novel, Low Cost, and Facile Method

In recent years, rare earth doped upconversion nanocrystals have been widely used in different fields owing to their unique merits. Although rare earth chlorides and trifluoroacetates are commonly used precursors for the synthesis of nanocrystals, they have certain disadvantages. For example, rare earth chlorides are expensive and rare earth trifluoroacetates produce toxic gases during the reaction. To overcome these drawbacks, we use the less expensive rare earth hydroxide as a precursor to synthesize β-NaYF₄ nanoparticles with multiform shapes and sizes. Small-sized nanocrystals (15 nm) can be obtained by precisely controlling the synthesis conditions. Compared with the previous methods, the current method is more facile and has lower cost. In addition, the defects of the nanocrystal surface are reduced through constructing core–shell structures, resulting in enhanced upconversion luminescence intensity.

Barcoded point-of-care bioassays

Barcoded bioassays are ready to promote bioanalysis and biomedicine toward the point of care.

Degradable magnetic-response photoacoustic/up-conversion luminescence imaging-guided photodynamic/photothermal antitumor therapy

In this research, a degradable uniform mesoporous platform was designed as an imaging-guided photothermal therapy (PTT)/photodynamic therapy (PDT) agent.

Polypyridyl ligands as a versatile platform for solid-state light-emitting devices

A comprehensive review of tuneable polypyridine complexes as the emissive components of OLED and LEC devices is presented, with a view to bridging the gap between molecular design and commercialization.

Enhanced upconversion luminescence of GdVO4:Er3+/Yb3+ prepared by spray pyrolysis using organic additives

Spray pyrolysis was applied to prepare Er³⁺/Yb³⁺-doped GdVO₄ particles, and their emission properties were investigated by varying the Er³⁺/Yb³⁺ content and the calcination temperature from 900 to 1400 °C. Ethylene glycol (EG), citric acid (CA) and N,N-dimethylformamide (DMF) were used as organic additives in order to improve the upconversion of GdVO₄:Er³⁺/Yb³⁺. The resulting GdVO₄:Er³⁺/Yb³⁺ particles show strong green emission due to ²H_11/2/⁴S_3/2 → ⁴I_15/2 transitions of Er³⁺ and weak red peak due to the ⁴F_9/2 → ⁴I_15/2 transition of Er³⁺. From the result observed by changing the pumping power of the near-infrared (NIR, 980 nm) laser, the observed green emission is caused by a typical two-photon process. In terms of achieving the highest upconversion luminescence, the optimal Er³⁺ and Yb³⁺ contents are 1.5% and 20% with respect to Gd, respectively. The luminescence intensity steadily increased as the calcination temperature was elevated up to 1200 °C due to the increment of crystallinity. The upconversion intensity showed a linear relationship with the crystallite size in all the calcination temperature range. Using the EG/CA/DMF mixture as organic additives improves the upconversion emission about 4.3 times higher than when no organic additives are used, due to the enhancement of crystallinity as well as the enlargement of primary particle size.

GdVO₄:Er/Yb fine particles with good upconversion luminescence was prepared by spray pyrolysis using organic additives.

Mesoporous semiconductors combined with up-conversion nanoparticles for enhanced photodynamic therapy under near infrared light

Photodynamic therapy (PDT) is a promising and effective method for tumor therapy that relies on the reactive oxygen species (ROS) produced by photosensitizers at specific wavelengths to inhibit tumor cells. Inorganic semiconductive materials are potential photosensitizers that can excellently absorb ultraviolet light to produce ROS to kill cancer cells. However, this strategy is still limited in terms of practical applications due to the weak penetration of ultraviolet light through biological tissue, as well as the hypoxic tumor microenvironment, largely decreasing ROS generation. In this research, novel PDT agents made with mesoporous lanthanide-semiconductor composites are developed to obtain a remarkable amount of generated ROS under near-infrared (NIR) laser irradiation. Due to the larger size (about 120 nm) of the up-conversion material (UCM) used as the substrate, coated with different amounts of semiconductors with mesoporous morphologies, this platform could emit higher blue emission under a 980 nm laser. Meanwhile, both of the semiconductors (SnO₂ and TiO₂) used have wide absorbance bands in the ultraviolet region, and the ultraviolet fluorescence emitted from the UCM core under NIR laser excitation can be used as the energy donor. Electron transfer processes in SnO₂ and TiO₂ are generated via the above platforms and produce ROS through photochemical action. Furthermore, the coated semiconductors are mesoporous with larger surface areas (about 302 m² g⁻¹) and various channels; this is beneficial to obtain enough oxygen to generate more ROS under a hypoxic environment. The PDT efficiency of a typical NaYF₄@SnO₂ sample is studied using a DPBF detector, in vitro MTT assays, and in vivo tumor inhibition experiments, revealing that this lanthanide-semiconductor platform could be potentially used as a PDT agent under NIR excitation.

Photodynamic therapy (PDT) is a promising and effective method for tumor therapy that relies on the reactive oxygen species (ROS) produced by photosensitizers at specific wavelengths to inhibit tumor cells.

Advances in the application of upconversion nanoparticles for detecting and treating cancers

The detection and treatment of cancer cells at an early stage are crucial for prolonging the survival time and improving the quality of life of patients. Upconversion nanoparticles (UCNPs) have unique physical and chemical advantages and likely provide a platform for detecting and treating cancer cells at an early stage. In this paper, the principle of UCNPs as chemical sensors based on fluorescence resonance energy transfer (FRET) has been briefly introduced. Research progress in such chemical sensors for detecting and analyzing bioactive substances and heavy metal ions at the subcellular level has been summarized. The principle of UCNP-based nanoprobe-targeting of cancer cells has been described. The research progress in using nanocomposites for cancer cell detection, namely cancer cell targeted imaging and tissue staining, has been discussed. In the field of cancer treatment, the principles and research progress of UCNPs in photodynamic therapy and photothermal therapy of cancer cells are systematically discussed. Finally, the prospects for UCNPs and remaining challenges to UCNP application in the field of cancer diagnosis and treatment are briefly described. This review provides powerful theoretical guidance and useful practical information for the research and application of UCNPs in the field of cancer.

Dual-channel fluorescence detection of mercuric (II) and glutathione by down- and up-conversion fluorescence carbon dots

The fluorescent carbon dots (CDs) with high fluorescent quantum yield (φ_f = 62%) and down- and up-conversion fluorescence properties were synthesized by one-pot hydrothermal treatment of citric acid and tris(hydroxymethyl)methyl aminomethane. The CDs displayed the capability to absorb excitation wavelength at 660 nm and 330 nm with fluorescence emission wavelength at 398 nm and 399 nm, respectively. The CDs showed high selectivity towards Hg²⁺ against various metal ions. Around 70% fluorescence was quenched by 40 μM Hg²⁺ through dynamic and static quenching mechanisms. Because of stronger affinity between the thiol and Hg²⁺, over 90% fluorescence was recovered by adding 40 μM glutathione to CDs-Hg²⁺ system. The calibration curves exhibited wide linear region for Hg²⁺ (0-4 μM) and glutathione (0-30 μM). The limits of detection with down- and up-conversion for Hg²⁺ were calculated to be 0.23 μM and 0.25 μM, and for glutathione were 0.28 μM and 0.29 μM, respectively. Inspired by the sensing results, logic gates with Hg²⁺ and glutathione as inputs were also established. Most importantly, this method was applied to detect Hg²⁺ and glutathione in tap water and lake water, and the recovery values were obtained to be 96.2%-110.4% and 93.4%-96.9%.

Organic Semiconducting Agents for Deep-Tissue Molecular Imaging: Second Near-Infrared Fluorescence, Self-Luminescence, and Photoacoustics

Optical imaging has played a pivotal role in biology and medicine, but it faces challenges of relatively low tissue penetration and poor signal-to-background ratio due to light scattering and tissue autofluorescence. To overcome these issues, second near-infrared fluorescence, self-luminescence, and photoacoustic imaging have recently emerged, which utilize an optical region with reduced light-tissue interactions, eliminate real-time light excitation, and detect acoustic signals with negligible attenuation, respectively. Because there are only a few endogenous molecules absorbing or emitting above the visible region, development of contrast agents is essential for those deep-tissue optical imaging modalities. Organic semiconducting agents with π-conjugated frameworks can be synthesized to meet different optical imaging requirements due to their easy chemical modification and legible structure-property relation. Herein, the deep-tissue optical imaging applications of organic semiconducting agents including small-molecule agents and nanoparticle derivatives are summarized. In particular, the molecular engineering and nanoformulation approaches to further improve the tissue penetration and detection sensitivity of these optical imaging modalities are highlighted. Finally, current challenges and potential opportunities in this emerging subfield of biomedical imaging are discussed.

Concentration Quenching in Upconversion Nanocrystals

Despite considerable effort to improve upconversion (UC) in lanthanide-doped nanocrystals (NCs), the maximum reported efficiencies remain below 10%. Recently, we reported on low Er³⁺- and Yb³⁺-doped NaYF₄ NCs giving insight into fundamental processes involved in quenching for isolated ions. In practice, high dopant concentrations are required and there is a trend toward bright UC in highly doped NCs. Here, additional quenching processes due to energy transfer and migration add to a reduction in UC efficiency. However, a fundamental understanding on how concentration quenching affects the quantum efficiency is lacking. Here, we report a systematic investigation on concentration-dependent decay dynamics for Er³⁺ or Yb³⁺ doped at various concentrations (1-100%) in core and core-shell NaYF₄ NCs. The qualitative and quantitative analyses of luminescence decay curves and emission spectra show strong concentration quenching for the green-emitting Er^3+ 4S_3/2 and NIR-emitting ⁴I_11/2 levels, whereas concentration quenching for the red-emitting ⁴F_9/2 level and the IR-emitting ⁴I_13/2 level is limited. The NIR emission of Yb³⁺ remains efficient even at concentration as high as 60% Yb³⁺, especially in core-shell NCs. Finally, the role of solvent quenching was investigated and reveals a much stronger quenching in aqueous media that can be explained by the high-energy O-H vibrations. The present study uncovers a more complete picture of quenching processes in highly doped UC NCs and serves to identify methods to further optimize the efficiency by careful tuning of lanthanide concentrations and core-shell design.

Separating and enhancing the green and red emissions of NaYF4:Yb3+/Er3+ by sandwiching them into photonic crystals with different bandgaps

Rational control of the multiple emission outputs and achieving single-band and strong luminescence of Ln³⁺ doped upconversion nanoparticles is highly desirable for their applications in sensor and display fields. Here, we designed a sandwich structure to separate and enhance the green and red emission of NaYF₄:Yb³⁺/Er³⁺ simultaneously and realized pure strong green and red emissions. NaYF₄:Yb³⁺/Er³⁺ nanocrystals were sandwiched between two layers of photonic crystals, which have bandgaps at 660 nm and 530 nm, respectively. The photonic crystal with a bandgap at 530 nm on top of the NaYF₄:Yb³⁺/Er³⁺ layer can filter the green emission of NaYF₄:Yb³⁺/Er³⁺, prohibiting its emission upward, and at the same time, enhancing its emission downward. Similarly, the photonic crystal with a bandgap at 660 nm can prohibit the transmission of the red emission, and at the same time enhance its reflection in the opposite direction. Consequently, enhanced green emission was observed from the bottom of the sandwich structure and enhanced red emission was observed from the top of the sandwich structure. Thus, the green and red emissions of NaYF₄:Yb³⁺/Er³⁺ were separated and both of them were enhanced. On the other hand, when using a photonic crystal with a bandgap that overlapped with the excitation light of NaYF₄:Yb³⁺/Er³⁺ nanoparticles, their emissions were all greatly enhanced. Our results suggest that photonic crystals are good candidates to separate and enhance the emissions of Ln³⁺ doped luminescent materials.

Measuring the internal quantum yield of upconversion luminescence for ytterbium-sensitized upconversion phosphors using the ytterbium(iii) emission as an internal standard

A method is presented for estimating the internal quantum yield (IQY) of NIR-to-NIR and NIR-to-visible upconversion (UC) luminescence for Yb3+-sensitized energy-transfer upconversion (ETU) phosphors. The method does not require an integrating sphere or a secondary standard, but rather uses the 1 μm emission of the Yb3+ sensitizer as an internal standard. The method requires the acquisition of the 1 μm emission decay curve of the UC phosphor using low pulse-energy density, an estimation of the radiative decay constant of the 1 μm emission, and emission spectra corrected for instrument response. This method is valid for UC emission spectra acquired via pulsed or continuous wave (cw) excitation. The method is demonstrated for cw excitation to obtain IQY for UC and downshifted luminescence for β-phase NaYF4: 0.5%Tm, 25%Yb and NaYF4: 2%Er, 18%Yb nanocrystals (with and without a passivating NaYF4 shell) over a range of excitation irradiance. The corresponding results are consistent with those obtained using integrating spheres and numerical simulations, respectively. For pulsed excitation, an additional alternative method is described which requires acquisition of the 1 μm emission decay curve at each excitation pulse-energy density for which the IQY is to be determined. The proposed methods should be particularly useful for samples having very low absorbance at the excitation wavelength, for which direct determination methods are impractical.

Nanocatalyst Complex Can Dephosphorylate Key Proteins in MAPK Pathway for Cancer Therapy

Controlling phosphorylation processes of proteins is a facile way for manipulating cell fates. Herein, a synergistic therapeutic strategy utilizing a near-infrared (NIR)-responsive nanocatalyst (NC) complex is presented, which is comprised of photoactive NC and protein phosphatase 2A (PP2A), to synergistically inhibit hyperphosphorylation of mitogen-activated protein kinase (MAPK) pathway for cancer therapy, as an example of many biological processes this approach can apply to. NIR-triggered release of PP2A specially dephosphorylates and inactivates mitogen-activated protein kinase kinase (MAP2K, also known as MEK) and extracellular regulated protein kinases (ERK) in the MAPK pathway, meanwhile, the NIR-triggered activation of NC decreases the level of intracellular adenosine triphosphate to attenuate protein phosphorylation of MEK and ERK. The synergistic therapeutics effectively suppress melanoma progression by inhibiting hyperphosphorylation of the MAPK pathway. In addition, the nanocatalyst complex reduces the risk of drug-resistance through inhibiting a rebound of RAS-GTP. The NIR-responsive nanocatalyst complex paves a novel way for cancer therapeutics.

Seeing, Targeting and Delivering with Upconverting Nanoparticles

Efficient control over drug release is critical to increasing drug efficacy and avoiding side effects. An ideal drug delivery system would deliver drugs in the right amount, at the right location and at the right time noninvasively. This can be achieved using light-triggered delivery: light is noninvasive, spatially precise and safe if appropriate wavelengths are chosen. However, the use of light-controlled delivery systems has been limited to areas that are not too deep inside the body because ultraviolet (UV) or visible (Vis) light, the typical wavelengths used for photoreactions, have limited penetration and are toxic to biological tissues. The advent of upconverting nanoparticles (UCNPs) has made it possible to overcome this crucial challenge. UCNPs can convert near-infrared (NIR) radiation, which can penetrate deeper inside the body, to shorter wavelength NIR, Vis and UV radiation. UCNPs have been used as bright, in situ sources of light for on-demand drug release and bioimaging applications. These remote-controlled, NIR-triggered drug delivery systems are especially attractive in applications where a drug is required at a specific location and time such as in anesthetics, postwound healing, cardiothoracic surgery and cancer treatment. In this Perspective, we discuss recent progress and challenges as well as propose potential solutions and future directions, especially with regard to their translation to the clinic.

The effects of lanthanide-doped upconverting nanoparticles on cancer cell biomarkers

Lanthanide-doped upconverting nanoparticles (Ln-UCNPs) possess optical and physicochemical properties that are promising for the design of new theranostic platforms. This applies in particular to the treatment of cancer. Towards this goal, oleate-capped-NaLuF4:Tm3+(0.5%)/Yb3+(20%)/Gd3+(30%) with an average size of 35 nm ± 2 nm were synthesized by co-precipitation. Due to their hydrophobic surface, these Ln-UCNPs produced agglomerates under cell culture conditions. To assess the cellular response to Ln-UCNPs at the molecular level, we evaluated several key aspects of tumor cell physiology. Using cancer lines of different origins, we demonstrated Ln-UCNP dependent changes of cancer cell biomarkers. Multiple cellular components that regulate tumorigenesis and cancer cell homeostasis were affected. In particular, Ln-UCNPs reduced the abundance of hsp70s, elevated DNA damage, and diminished nucleolin and B23/nucleophosmin, proteins required for the assembly of ribosomes. Treatment with Ln-UCNPs also decreased the concentration of paxillin, a focal adhesion protein that is involved in directed cell migration. Furthermore, epidermal growth factor (EGFR) levels were decreased by Ln-UCNPs for most cancer cell lines examined. Taken together, we identified several potential cancer cell targets that were affected by Ln-UCNPs. Our work thereby provides the foundation to optimize Ln-UCNPs for the targeted killing of tumor cells.

Fast, low-cost preparation of hackmanite minerals with reversible photochromic behavior using a microwave-assisted structure-conversion method

A microwave-assisted structure-conversion (MASC) method was used to obtain photochromic hackmanites (M,Na)8Al6Si6O24(Cl,S)2 (M: Li, Na, and K) in a fast (12 to 20 min) one-step process. Structural conversion from Zeolite A to hackmanite minerals has been proven to be very effective through an aluminosilicate crystalline intermediate. Photochromism is observed with both UV and X-ray (CuKα) excitation.

Advances in highly doped upconversion nanoparticles

Lanthanide-doped upconversion nanoparticles (UCNPs) are capable of converting near-infra-red excitation into visible and ultraviolet emission. Their unique optical properties have advanced a broad range of applications, such as fluorescent microscopy, deep-tissue bioimaging, nanomedicine, optogenetics, security labelling and volumetric display. However, the constraint of concentration quenching on upconversion luminescence has hampered the nanoscience community to develop bright UCNPs with a large number of dopants. This review surveys recent advances in developing highly doped UCNPs, highlights the strategies that bypass the concentration quenching effect, and discusses new optical properties as well as emerging applications enabled by these nanoparticles.

Ultrafast Single-Band Upconversion Luminescence in a Liquid-Quenched Amorphous Matrix

Achieving single-band upconversion is a challenging but rewarding approach to attain optimal performance in diverse applications, such as multiplexed molecular imaging, security coding, and nonlinear photonic devices. Here, highly efficient single-band upconversion luminescence in the green spectral regime (16.4 times increase in emission at 525 nm) accomplished by realizing minimal energy loss from two-photon upconversion in a newly synthesized liquid-quenched amorphous matrix is reported. In contrast to previously reported single-band upconversion, this phenomenon originates from the elevated transition probability of the host sensitive transition via changes in the host matrix's microstructure. The elevated transition probability facilitates ultrafast decay of upconversion luminescence with decay times as short as 0.2 µs, the fastest decay ever reported. The material in this study therefore has strong potential for use in photonic devices demanding high upconversion efficiency with a fast response time, which to date has been inaccessible using upconversion materials.

Cooperativity Principles in Self-Assembled Nanomedicine

Nanomedicine is a discipline that applies nanoscience and nanotechnology principles to the prevention, diagnosis, and treatment of human diseases. Self-assembly of molecular components is becoming a common strategy in the design and syntheses of nanomaterials for biomedical applications. In both natural and synthetic self-assembled nanostructures, molecular cooperativity is emerging as an important hallmark. In many cases, interplay of many types of noncovalent interactions leads to dynamic nanosystems with emergent properties where the whole is bigger than the sum of the parts. In this review, we provide a comprehensive analysis of the cooperativity principles in multiple self-assembled nanostructures. We discuss the molecular origin and quantitative modeling of cooperative behaviors. In selected systems, we describe the examples on how to leverage molecular cooperativity to design nanomedicine with improved diagnostic precision and therapeutic efficacy in medicine.

A Modular System for the Design of Stimuli-Responsive Multifunctional Nanoparticle Aggregates by Use of Host-Guest Chemistry

A self-assembly approach for the design of multifunctional nanomaterials consisting of different nanoparticles (gold, iron oxide, and lanthanide-doped LiYF₄ ) is developed. This modular system takes advantage of the light-responsive supramolecular host-guest chemistry of β-cyclodextrin and arylazopyrazole, which enables the dynamic and reversible self-assembly of particles to spherical nanoparticle aggregates in aqueous solution. Due to the magnetic iron oxide nanoparticles, the aggregates can be manipulated by an external magnetic field leading to the formation of linear structures. As a result of the integration of upconversion nanoparticles, the aggregates are additionally responsive to near-infrared light and can be redispersed by use of the upconversion effect. By varying the nanoparticle and linker concentrations the composition, size, shape, and properties of the multifunctional nanoparticle aggregates can be fine-tuned.

Bioresponsive and near infrared photon co-enhanced cancer theranostic based on upconversion nanocapsules

Developing nanotheranostics responsive to tumor microenvironments has attracted tremendous attention for on-demand cancer diagnosis and treatment. Herein, a facile Mn-doping strategy was adopted to transform mesoporous silica coated upconversion nanoparticles (UCNPs) to yolk-like upconversion nanostructures which possess a tumor-responsive biodegradation nature. The huge internal space of the innovated nanocarriers is suitable for doxorubicin (DOX) storage, besides, the Mn-doped shell is sensitive to the intratumoral acidity and reducibility, which enables shell biodegradation and further accelerates the breakage of Si-O-Si bonds within the silica framework. This tumor-responsive shell degradation is beneficial for realizing tumor-specific DOX release. Subsequently, polyoxometalate (POM) nanoclusters that can enhance photothermal conversion in response to the tumor reducibility and acidity were modified on the surface of the silica shell, thereby achieving NIR-enhanced shell degradation and also preventing premature DOX leakage. The as-produced thermal effect of the POM couples with the chemotherapy effect of the released DOX to perform a synergetic chemo-photothermal therapy. Additionally, the shell degradation brings size shrinkage to the nanocarriers, allowing faster nanoparticle diffusion and deeper tumor penetration, which is significant for improving theranostic outcomes. Also, the drastic decline of the red/green (R/G) ratio caused by the DOX release can be used to monitor the DOX release content through a fluorescence resonance energy transfer (FRET) method. The MRI effect caused by Mn release together with the MRI/CT/UCL imaging derived from Gd3+/Yb3+/Nd3+/Er3+ co-doped UCNPs under 808 nm laser excitation endow the nanosystem with multiple imaging capability, thus realizing imaging-guided cancer therapy.