Phase Segregation and Photothermal Remixing of Mixed-Halide Lead Perovskites

Mixed-halide lead perovskites (MHPs) are promising materials for photovoltaics and optoelectronics due to their highly tunable band gaps. However, they phase segregate under continuous illumination or an electric field, the mechanism of which is still under debate. Herein we systematically measure the phase segregation behavior of polymer-encapsulated CH₃NH₃Pb(Br_xI_1-x)₃ MHPs as a function of excitation intensity and the nominal halide ratio by in situ photoluminescence microspectroscopy and observe surprising phase dynamics at the beginning of the illumination. The initial phase segregation to I-rich and Br-rich phases is observed followed by the formation of a new mixed-halide phase within several seconds that has not been reported before. We propose that the photothermal effect is amplified at the small-size I-rich domains, which significantly changes the local phase segregation in the otherwise uniform film within milliseconds after illumination.

Optimized performance III-nitride-perovskite-based heterojunction photodetector via asymmetric electrode configuration

Organometal halide perovskite photodetectors have recently drawn significant attention due to their excellent potential to perform as broadband photodetectors. However, the photoresponse in the ultraviolet (UV) spectrum can be improved by introducing wide bandgap semiconductors. In this work, we report on a methylammonium lead iodide/p-type gallium nitride (MAPI/p-GaN) heterojunction photodetector. We demonstrate that the device is capable of detecting in the UV region by p-GaN being hybridized with MAPI. We further investigate different symmetric and asymmetric metal-electrode contacts to enhance the device performance including the response time. The asymmetric electrode configuration is found to be the most optimal configuration which results in high photoresponse (photo-responsivity is 55 mA W⁻¹ and fall time < 80 ms). As the light illumination occurs through the GaN side, its presence ultimately reduces MAPI degradation due to efficient absorption of the UV photons by GaN film.

Enhanced perovskite/GaN-based broad-band photodetector is demonstrated by optimizing electrode configurations. The detection capability of the optimized perovskite/GaN structure was extended to UV range with fast response and high responsivity.

Template-Assisted Formation of High-Quality α-Phase HC(NH2)2PbI3 Perovskite Solar Cells

Formamidinium (FA) lead halide (α-FAPbI3) perovskites are promising materials for photovoltaic applications because of their excellent light harvesting capability (absorption edge 840 nm) and long carrier diffusion length. However, it is extremely difficult to prepare a pure α-FAPbI3 phase because of its easy transformation into a nondesirable δ-FAPbI3 phase. In the present study, a "perovskite" template (MAPbI3-FAI-PbI2-DMSO) structure is used to avoid and suppress the formation of δ-FAPbI3 phases. The perovskite structure is formed via postdeposition involving the treatment of colloidal MAI-PbI2-DMSO film with FAI before annealing. In situ X-ray diffraction in vacuum shows no detectable δ-FAPbI3 phase during the whole synthesis process when the sample is annealed from 100 to 180 °C. This method is found to reduce defects at grain boundaries and enhance the film quality as determined by means of photoluminescence mapping and Kelvin probe force microscopy. The perovskite solar cells (PSCs) fabricated by this method demonstrate a much-enhanced short-circuit current density (  J sc) of 24.99 mA cm-2 and a power conversion efficiency (PCE) of 21.24%, which is the highest efficiency reported for pure FAPbI3, with great stability under 800 h of thermal ageing and 500 h of light soaking in nitrogen.

Photomultiplying Visible Light Detection by Halide Perovskite Nanoparticles Hybridized with an Organo Eu Complex

A molecular layer of an organo europium (Eu) complex was hybridized with the surface of halide perovskite (MAPbI₃) nanocrystals to control charge transport between photoexcited perovskites and a metal electrode. A thin hybridized nanocrystalline film was found to cause an efficient photomultiplication reaction based on hole accumulation at photoexcited perovskite nanoparticles and charge tunneling across the Eu complex molecules under application of a low external bias (-0.5 V). A photodetecting device based on the Eu complex and perovskite absorber demonstrated photoinduced current generation at extremely high quantum conversion efficiency of 290 000% for weak monochromatic light (<1 mW cm^-2), yielding a power responsivity value up to 1289 A W^-1. High sensitivity of photodetection was enabled by using nanosized particles (<5 nm) of perovskite having a high surface area in contact with the Eu complex, while sensitivity was reduced by use of thick and large particle perovskite layers.

Enhanced Switching Ratio and Long-Term Stability of Flexible RRAM by Anchoring Polyvinylammonium on Perovskite Grains

The ON/OFF ratio and long-term stability are two important issues for flexible organic-inorganic hybrid perovskite (OHP) resistive random access memory (RRAM) for practical applications. In this work, polyvinylammonium (PVAm) is applied to partially replace methylamine ions (MA⁺) to fabricate the stable and flexible polymeric OHP RRAM devices, wherein PVAm acts as nucleation sites and the template for crystalline growth of MAPbI₃ to tune the microscopic perovskite structure. Simultaneously, the multiple perovskite grain interfaces are strengthened through the long-carbochain polymeric backbone, hence producing a continuous and compact perovskite film. As a result, the PVAm-modified OHP RRAM device shows remarkable enhancement of the ON/OFF ratio, long-term stability, and flexibility compared with the unmodified OHP device. Specifically, the polymeric OHP device exhibits fast and stable nonvolatile resistive switching (RS) characteristics with an ON/OFF ratio of ∼10⁵ and a set voltage of -0.45 V under ambient conditions. Also, the distinct multilevel RS behavior can be realized in this device by controlling the compliance current in the SET process. Additionally, the unsealed polymeric OHP device manifests the striking long-term stability, which can still maintain the stable memory performance after 1 year exposure to the humid and thermal ambient environment. Furthermore, the flexible polymeric OHP device was also fabricated and affords the excellent bending endurance behavior by showing a reproducible RS property over 100-cycle bending experiments. This work provides a new perovskite-based material design strategy of polymeric OHP for stable and flexible RRAM devices with the high ON/OFF ratio.

Simultaneous Mapping of Thermal Conductivity, Thermal Diffusivity, and Volumetric Heat Capacity of Halide Perovskite Thin Films: A Novel Nanoscopic Thermal Measurement Technique

Local thermal conductivity, thermal diffusivity, and volumetric heat capacity of all-inorganic halide perovskite thin films are mapped simultaneously and with highest spatial resolution for the first time. These various thermal properties are detected by a scanning near-field thermal microscope operated at two different frequencies simultaneously. We apply this technique to analyze the thermal properties of halide perovskites on the nanoscale. In addition to an ultralow thermal conductivity of 0.43 ± 0.03 and 0.33 ± 0.02 W/(m·K), a low thermal diffusivity of 0.3 ± 0.1 mm²/s and a small heat capacity of 0.29 ± 0.9 and 0.18 ± 0.6 J/(g·K) are obtained for CsPbBr₃ and CsPb₂Br₅ films, respectively. The findings of our thermal microscopy are of great general importance for the thermal design of thin-film devices based on halide perovskites, while the measurement technique itself is generally applicable for other thin-film optoelectronic materials.

Modifying morphology and defects of low-dimensional, semi-transparent perovskite thin films via solvent type

(PEA)2(MA) n-1Pb n I n+1Br2n perovskites are semi-transparent, color-tunable thin films with broader band gaps. They have the potential for semi-transparent solar cell and smart window applications. Solvent engineering significantly alters the morphology, absorbance, crystallinity, charge separation, and defects, thereby influencing the optoelectronic properties. Herein, we investigated the effect of the solvent type on the low dimensional, mixed halide perovskite thin films (n = 1, 3, and 5) and identified DMF : DMSO = 8 : 2 as the most suitable solvent. The mixed solvent regulated the growth rate of perovskites, which led to the smooth morphology and larger crystallite size. Through surface photovoltage spectroscopy and time resolved photoluminescence, good charge separation and low defects were linked to DD82 usage.

Degradation Mechanism and Relative Stability of Methylammonium Halide Based Perovskites Analyzed on the Basis of Acid-Base Theory

The correct identification of all gases released during hybrid perovskite degradation is of great significance to develop strategies to extend the lifespan of any device based on this semiconductor. CH₃X (X = Br/I) is a released degradation gas/low boiling point liquid arising from methylammonium (MA⁺) based perovskites, which has been largely overlooked in the literature focusing on stability of perovskite solar cells. Herein, we present an unambiguous identification of CH₃I release using microwave (rotational) spectroscopy. An experimental back-reaction test demonstrates that the well-known CH₃NH₂/HX degradation route may not be the ultimate degradation pathway of MAPbX₃ in thermodynamic closed systems. Meanwhile, the CH₃X/NH₃ route cannot back-react selectively to MAX formation as occurred for the former back-reaction. Metadynamics calculations uncover the X halide effect on energy barriers for both degradation reactions showing a better stability of Br based perovskite ascribed to two aspects: (i) lower Brönsted-Lowry acidity of HBr compared to HI and (ii) higher nucleophilic character of CH₃NH₂ compared to NH₃. The latter property makes CH₃NH₂ molecules stay preferentially attached on the electrophilic perovskite surface (Pb²⁺) during the dynamic simulation instead of being detached as observed for the NH₃ molecule.

The Impact of a Dynamic Two-Step Solution Process on Film Formation of Cs0.15 (MA0.7 FA0.3 )0.85 PbI3 Perovskite and Solar Cell Performance

This paper provides deep understanding of the formation mechanism of perovskite film fabricated by sequential solution-based methods. It compares two sequential spin-coating methods for Cs_0.15 (MA_0.7 FA_0.3 )_0.85 PbI₃ perovskite. First is the "static process," with a stoppage between the two spin-coating steps (1st PbI₂ -CsI-dimethyl sulfoxide (DMSO)-dimethylformamide (DMF) and 2nd methylammonium iodide (MAI)-formamidinium iodide (FAI)-isopropyl alcohol). Second is the "dynamic process," where the 2nd precursor is dispensed while the substrate is still spinning from the 1st step. For the first time, such a dynamic process is used for Cs_0.15 (MA_0.7 FA_0.3 )_0.85 PbI₃ perovskite. Characterizations reveal improved film formation with the dynamic process due to the "retainment" of DMSO-complex necessary for the intermediate phase which i) promotes intercalation between precursors and ii) slows down perovskite crystallization for full conversion. The comparison on as-deposited perovskite before annealing indicates a more ordered film using this dynamic process. This results in a thicker, more uniform film with higher degree of preferred crystal orientation and higher carrier lifetime after annealing. Therefore, dynamic-processed devices present better performance repeatability, achieving a higher average efficiency of 17.0% compared to static ones (15.0%). The new insights provided by this work are important for perovskite solar cells processed sequentially as the process has greater flexibility in resolving solvent incompatibility, allowing separate optimizations and allowing different deposition methods.

Effect of intermediate phases on the optical properties of PbI2-rich CH3NH3PbI3 organic-inorganic hybrid perovskite

Methylammonium lead halide perovskite (CH3NH3PbI3) films, with high PbI2 concentration, were grown by the two-step spin coating method. The influence of the precursor concentration and annealing time on the optical and structural properties of the perovskite films was analyzed by optical absorption, photoluminescence, X-ray diffraction and scanning electron microscopy. The results showed that, in addition to the CH3NH3PbI3 and PbI2 phases, intermediate phases, such as (MA)2(DMF)2Pb3I8, were formed in the films, depending on the time and temperature of annealing, which can tune the optical absorption in the visible spectra. This intermediate phase induced the formation of perovskite nanowires, identified by SEM images, and their growth may be associated with the presence of the DMF solvent remaining in the PbI2 film.

Enhancement in the photovoltaic performance of planar perovskite solar cells by perovskite cluster engineering using an interfacial energy modifier

The grain size and quality of hybrid organic-inorganic perovskite (HOIP) films greatly affect the performance of perovskite solar cells (PSCs). However, dripping an anti-solvent during the spin coating process induces rapid nucleation and reduces the grain size. Here, a facile method is developed to engineer clusters in precursor solution and obtain high-quality perovskite films with an enlarged grain size. A cluster interfacial modifier, chlorobenzene (CB), is added to precursor solution. The modifier increases the interfacial energy between the precursor cluster and the solvent. The increased interfacial energy suppresses the nucleation and gives rise to HOIP films with large grains and high crystallinity. The efficiency of PSCs based on this method is greatly improved from 17.55% to 19.5%.

Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications

The perovskite precursor solution chemistry is of paramount importance for well-controlled nucleation/crystal growth in solution-processed perovskite solar cells.

Rich Chemistry in Inorganic Halide Perovskite Nanostructures

Halide perovskites have emerged as a class of promising semiconductor materials owing to their remarkable optoelectronic properties exhibiting in solar cells, light-emitting diodes, semiconductor lasers, etc. Inorganic halide perovskites are attracting increasing attention because of the higher stability toward moisture, light, and heat as compared with their organic-inorganic hybrid counterparts. In particular, inorganic halide perovskite nanomaterials provide controllable morphology, tunable optoelectronic properties, and improved quantum efficiency. Here, the development controlled synthesis of desired inorganic halide perovskite nanostructures by various chemical approaches is described. Utilizing these nanostructures as platforms, anion exchange chemistry for wide compositional and optical tunabilities is described, and the rich structural phase transition phenomenon and mechanism investigated systematically. Furthermore, these nanostructures and extracted knowledge are applied to design photonic, photovoltaic, and thermoelectric devices. Finally, future directions and challenges toward improvement of the optical, electrical, and optoelectronic properties, exploration of the anion and cation exchange kinetics, and alleviation of the stability and toxicity issues in inorganic lead based halide perovskites are discussed to provide an outlook on this promising field.

Luminescent Intermediates and Humidity-Dependent Room-Temperature Conversion of the MAPbI3 Perovskite Precursor

Preparation of metal-halide perovskites under room temperature attracts attention because of energy saving by removing thermal annealing. Room-temperature transformation of spin-cast wet films consisting of methylammonium (MA) iodide, PbI₂, and dimethylformamide toward solid MAPbI₃ perovskite proceeds via several intermediate crystalline states and is strongly dependent on ambient humidity. Light transmission and photoluminescence (PL) microscopy and spectroscopy were used to monitor the growth of crystals and transformation of their properties in time under nitrogen atmosphere at room temperature. Under low humidity, a highly luminescent intermediate phase with low absorption in the visible range appears, with the PL spectra composed of several bands in the range from 600 to 760 nm. We assign these bands to low-dimensional (nanocrystals and two-dimensional inclusions) MAPbI₃ intermediates, where the exciton confinement shifts the spectrum to higher energies in comparison with the bulk MAPbI₃. The intermediate levels of ambient humidity (10-50%) appear to catalyze the conversion of the intermediate phase to MAPbI₃. At a high ambient humidity (>80%), the initially formed MAPbI₃ is quickly transformed to the transparent hydrate phase of MAPbI₃. The role of ambient water catalyzing the material transformation by competing for Pb coordination with the solvent molecules is discussed.

Solvent engineering for high conversion yields of layered raw materials into large-scale freestanding hybrid perovskite nanowires

Hybrid organic-inorganic perovskite nanowires have received considerable attention for applications in optoelectronic fields; however, practical implementation of perovskite nanowires into optoelectronic devices is often hindered by low product yields, scaled-up synthesis, or overall lack of synthetic control. Herein, we report novel insights into large-scale freestanding lead halide perovskite nanowires using a series of solvent effects. A facile pathway for converting layered raw materials to nanowires with high conversion yields can facilitate the large-scale applications of nanowires, which could help us understand the unique aspects of the formation chemistry of the materials. We introduced a two-step process to obtain perovskite nanowires without an impurity phase that first involves the formation of Pb-containing nanowires with the poor solvent drip method. Subsequently, the as-prepared Pb-containing precursors can be used as morphology templates for converting completely into perovskite nanowires with high conversion yields of 83% through a series of solvent effects, such as solvent-driven, solvent-removing, solvent-exchange and solvent-growth. The synthetic strategy was demonstrated to be applicable for other perovskite-based materials, which can offer a comprehensive understanding of the formation mechanism of perovskite-based materials.

Nanochannel-Assisted Perovskite Nanowires: From Growth Mechanisms to Photodetector Applications

Growing interest in hybrid organic-inorganic lead halide perovskites has led to the development of various perovskite nanowires (NWs), which have potential use in a wide range of applications, including lasers, photodetectors, and light-emitting diodes (LEDs). However, existing nanofabrication approaches lack the ability to control the number, location, orientation, and properties of perovskite NWs. Their growth mechanism also remains elusive. Here, we demonstrate a micro/nanofluidic fabrication technique (MNFFT) enabling both precise control and in situ monitoring of the growth of perovskite NWs. The initial nucleation point and subsequent growth path of a methylammonium lead iodide-dimethylformamide (MAPbI₃·DMF) NW array can be guided by a nanochannel. In situ UV-vis absorption spectra are measured in real time, permitting the study of the growth mechanism of the DMF-mediated crystallization of MAPbI₃. As an example of an application of the MNFFT, we demonstrate a highly sensitive MAPbI₃-NW-based photodetector on both solid and flexible substrates, showing the potential of the MNFFT for low-cost, large-scale, highly efficient, and flexible optoelectronic applications.

Enhanced Crystallization by Methanol Additive in Antisolvent for Achieving High-Quality MAPbI3 Perovskite Films in Humid Atmosphere

Perovskite solar cells have attracted considerable attention owing to their easy and low-cost solution manufacturing process with high power conversion efficiency. However, the fabrication process is usually performed inside a glovebox to avoid moisture, as organometallic halide perovskites are easily dissolved in water. In this study, we propose a one-step fabrication of high-quality MAPbI₃ perovskite films in around 50 % relative humidity (RH) humid ambient air by using diethyl ether as an antisolvent and methanol as an additive into this antisolvent. Because of the presence of methanol, the water molecules can be efficiently removed from the gaps of the perovskite precursors and the perovskite film formation can be slightly controlled, leading to pinhole-free and low roughness films. Concurrently, methanol can be used to tune the DMSO ratio in the intermediate perovskite phase to regulate perovskite formation. Planar solar cells fabricated by using this method exhibited the best efficiency of 16.4 % with a reduced current density-voltage hysteresis. This efficiency value is approximately 160 % higher than the devices fabrication by using only diethyl ether treatment. From the impedance measurement, it is also found that the recombination reaction is suppressed when the device is prepared with methanol additive in the antisolvent. This method presents a new path for controlling the growth and morphology of perovskite films in humid climates and laboratories with uncontrolled environments.

Inverted (p-i-n) perovskite solar cells using a low temperature processed TiO x interlayer

In this article, we present the improvement in device performance and stability as well as reduction in hysteresis of inverted mixed-cation-mixed-halide perovskite solar cells (PSCs) using a low temperature, solution processed titanium oxide (TiO x ) interlayer between [6,6]-phenyl-C61 butyric acid methyl ester (PCBM) and an Al electrode. Upon applying a TiO x interlayer, device resistance was reduced compared to that of the control devices, which results in improved rectification of the characteristic current density-voltage (J-V) curve and improved overall performance of the device. PSCs with the TiO x interlayer show an open-circuit voltage (V oc) of around 1.1 V, current density (J sc) of around 21 mA cm-2, fill factor (FF) of around 72% and enhanced power conversion efficiency (PCE) of 16% under AM1.5 solar spectrum. Moreover, devices with the TiO x interlayer show improved stability compared to devices without the TiO x interlayer. This finding reveals the dual role of the TiO x interlayer in improving device performance and stability.

Interface State-Induced Negative Differential Resistance Observed in Hybrid Perovskite Resistive Switching Memory

Hybrid organic-inorganic perovskite, well-known as light-absorbing materials in solar cells, have recently attracted considerable interest for applications in resistive switching (RS) memory. A better understanding of the role of interface state in hybrid perovskite materials on RS behavior is essential for the development of practical devices. Here, we study the influence of interface state on the RS behavior of an Au/CH₃NH₃PbI₃/FTO memory device using a simple air exposure method. We observe a transition of RS hysteresis behavior with exposure time. Initially no hysteresis is apparent, but air exposure induces bipolar RS and a negative differential resistance (NDR) phenomenon. The reductions of I/Pb atomic ratio and work function on the film surface are examined using XPS spectra and Kelvin probe technique, verifying the produce of donor-type interface states (e.g., iodine vacancies) during CH₃NH₃PbI₃ film degradation. Studies on complex impedance spectroscopy confirm the responsibility of interface states in NDR behavior. Eventually, the trapping/detrapping of electrons in bulk defects and at interface states accounts for the bipolar RS behavior accompanied with the NDR effect.

Perovskites-Based Solar Cells: A Review of Recent Progress, Materials and Processing Methods

With the rapid increase of efficiency up to 22.1% during the past few years, hybrid organic-inorganic metal halide perovskite solar cells (PSCs) have become a research “hot spot” for many solar cell researchers. The perovskite materials show various advantages such as long carrier diffusion lengths, widely-tunable band gap with great light absorption potential. The low-cost fabrication techniques together with the high efficiency makes PSCs comparable with Si-based solar cells. But the drawbacks such as device instability, J-V hysteresis and lead toxicity reduce the further improvement and the future commercialization of PSCs. This review begins with the discussion of crystal and electronic structures of perovskite based on recent research findings. An evolution of PSCs is also analyzed with a greater detail of each component, device structures, major device fabrication methods and the performance of PSCs acquired by each method. The following part of this review is the discussion of major barriers on the pathway for the commercialization of PSCs. The effects of crystal structure, fabrication temperature, moisture, oxygen and UV towards the stability of PSCs are discussed. The stability of other components in the PSCs are also discussed. The lead toxicity and updated research progress on lead replacement are reviewed to understand the sustainability issues of PSCs. The origin of J-V hysteresis is also briefly discussed. Finally, this review provides a roadmap on the current needs and future research directions to address the main issues of PSCs.

Methodologies toward Highly Efficient Perovskite Solar Cells

A perovskite solar cell (PSC) employing an organic-inorganic lead halide perovskite light harvester, seeded in 2009 with power conversion efficiency (PCE) of 3.8% and grown in 2011 with PCE of 6.5% in dye-sensitized solar cell structure, has received great attention since the breakthrough reports ≈10% efficient solid-state PCSs demonstrating 500 h stability. Developments of device layout and high-quality perovskite film eventually lead to a PCE over 22%. As of October 31, 2017, the highest PCE of 22.7% is listed in an efficiency chart provided by NREL. In this Review, the methodologies to obtain highly efficient PSCs are described in detail. In order to achieve a PCE of over 20% reproducibly, key technologies are disclosed from the viewpoint of precursor solution chemistry, processing for defect-free perovskite films, and passivation of grain boundaries. Understanding chemical species in precursor solution, crystal growth kinetics, light-matter interaction, and controlling defects is expected to give important insights into not only reproducible production of high PCE over 20% but also further enhancement of the PCE of PCSs.

Enhancing Moisture and Water Resistance in Perovskite Solar Cells by Encapsulation with Ultrathin Plasma Polymers

A compromise between high power conversion efficiency and long-term stability of hybrid organic-inorganic metal halide perovskite solar cells is necessary for their outdoor photovoltaic application and commercialization. Herein, a method to improve the stability of perovskite solar cells under water and moisture exposure consisting of the encapsulation of the cell with an ultrathin plasma polymer is reported. The deposition of the polymer is carried out at room temperature by the remote plasma vacuum deposition of adamantane powder. This encapsulation method does not affect the photovoltaic performance of the tested devices and is virtually compatible with any device configuration independent of the chemical composition. After 30 days under ambient conditions with a relative humidity (RH) in the range of 35-60%, the absorbance of encapsulated perovskite films remains practically unaltered. The deterioration in the photovoltaic performance of the corresponding encapsulated devices also becomes significantly delayed with respect to devices without encapsulation when vented continuously with very humid air (RH > 85%). More impressively, when encapsulated solar devices were immersed in liquid water, the photovoltaic performance was not affected at least within the first 60 s. In fact, it has been possible to measure the power conversion efficiency of encapsulated devices under operation in water. The proposed method opens up a new promising strategy to develop stable photovoltaic and photocatalytic perovskite devices.

Efficient Planar-Heterojunction Perovskite Solar Cells Fabricated by High-Throughput Sheath-Gas-Assisted Electrospray

When a perovskite precursor solution is electrosprayed using the conventional method where the nebulization of the solution is primarily governed by electrostatics, its high electrical conductivity tends to cause electrospray instabilities and thus makes high-quality perovskite films very difficult to obtain. Here, we report high-throughput fabrication of efficient perovskite solar cells (PSCs) whose CH₃NH₃PbI_3-xCl_x films are deposited using a sheath-gas-assisted electrospray system. Our system, based on strong pneumatic nebulization as well as high-voltage electrostatic charging of droplets, enables very stable high-flow electrospray of small charged droplets, even for the highly conductive perovskite precursor solution. Consequently, with the control of the drying rate of the droplets deposited on substrates by adjusting the substrate temperature during deposition, crystalline, void-free CH₃NH₃PbI_3-xCl_x films with nearly 100% surface coverage and high thickness uniformity are obtained. Inverted planar-heterojunction PSCs employing these films have a maximum power conversion efficiency of 14.2% with a small standard deviation of 0.9%, comparable to that of the spin-coated device.

Adsorbed carbon nanomaterials for surface and interface-engineered stable rubidium multi-cation perovskite solar cells

The current work reports the simultaneous enhancement in efficiency and stability of low-temperature, solution-processed triple cation based MA_0.57FA_0.38Rb_0.05PbI₃ (MA: methyl ammonium, FA: formamidinium, Rb: rubidium) perovskite solar cells (PSCs) by means of adsorbed carbon nanomaterials at the perovskite/electron transporting layer interface. The quantity and quality of the adsorbents are precisely controlled to electronically modify the ETL surface and lower the energy barrier across the interface. Carbon derivatives namely fullerene (C₆₀) and PC₇₁BM ([6,6]-phenyl C71 butyric acid methyl ester) are employed as adsorbents in conjunction with ZnO and together serve as a bilayer electron transporting layer (ETL). The adsorbed fullerene (C₆₀-ZnO, abbreviated as C-ZnO) passivates the interstitial trap-sites of ZnO with interstitial intercalation of oxygen atoms in the ZnO lattice structure. C-ZnO ETL based PSCs demonstrate about a 19% higher average PCE compared to conventional ZnO ETL based devices and a nearly 9% higher average PCE than PC₇₁BM adsorbed-ZnO (P-ZnO) ETL based PSCs. In addition, the interstitial trap-state passivation with a C-ZnO film upshifts the Fermi-level position of the C-ZnO ETL by 130 meV, with reference to the ZnO ETL, which contributes to an enhanced n-type conductivity. The photocurrent hysteresis phenomenon in C-ZnO PSCs is also substantially reduced due to mitigated charge trapping phenomena and concomitant reduction in an electrode polarization process. Another major highlight of this work is that, C-ZnO PSCs demonstrate a superior device stability retaining about 94% of its initial PCE in the course of a month-long, systematic degradation study conducted in our work. The enhanced device stability with C-ZnO PSCs is attributed to their high resistance to aging-induced recombination phenomena and a water-induced perovskite degradation process, due to a lower content of oxygen-related chemisorbed species on the C-ZnO ETL. The intricate mechanisms behind the efficiency and stability enhancement are investigated in detail and explained in the context of enhanced surface and interfacial electronic properties.

Room-temperature film formation of metal halide perovskites on n-type metal oxides: the catalysis of ZnO on perovskite crystallization

The ZnO/perovskite interface can efficiently catalyse the perovskite crystallization process even without thermal annealing.

Efficient Planar Structured Perovskite Solar Cells with Enhanced Open-Circuit Voltage and Suppressed Charge Recombination Based on a Slow Grown Perovskite Layer from Lead Acetate Precursor

For planar structured organic-inorganic hybrid perovskite solar cells (PerSCs) with the poly(3,4-ethylenedioxythiophene:polystyrene sulfonate) (PEDOT:PSS) hole transport layer, the open-circuit voltage (V_oc) of the device is limited to be about 1.0 V, resulting in inferior performance in comparison with TiO₂-based planar counterparts. Therefore, increasing V_oc of the PEDOT:PSS-based planar device is an important way to enhance the efficiency of the PerSCs. Herein, we demonstrate a novel approach for perovskite film formation and the film is formed by slow growth from lead acetate precursor via a one-step spin-coating process without the thermal annealing (TA) process. Because the perovskite layer grows slowly and naturally, high-quality perovskite film can be achieved with larger crystalline particles, less defects, and smoother surface morphology. Ultraviolet absorption, X-ray diffraction, scanning electron microscopy, steady-state fluorescence spectroscopy (photoluminescence), and time-resolved fluorescence spectroscopy are used to clarify the crystallinity, morphology, and internal defects of perovskite thin films. The power conversion efficiency of p-i-n PerSCs based on slow-grown film (16.33%) shows greatly enhanced performance compared to that of the control device based on traditional thermally annealed perovskite film (14.33%). Furthermore, the V_oc of the slow-growing device reaches 1.12 V, which is 0.1 V higher than that of the TA device. These findings indicate that slow growth of the perovskite layer from lead acetate precursor is a promising approach to achieve high-quality perovskite film for high-performance PerSCs.

Understanding the Effect of Delay Time of Solvent Washing on the Performances of Perovskite Solar Cells

Uniform and dense perovskite films were realized by the one-step solution-processing method combined with toluene washing. The influence of the delay time applied for toluene washing on the film quality of CH₃NH₃PbI₃ (MAPbI₃) was investigated in a comprehensive manner. The optimal delay time was experimentally observed at the critical point when the color of the film changes from transparent to hazy. A detailed X-ray diffraction study suggested that such a color change was caused by the emergence of the MAPbI₃ crystal nucleus. This finding provides a convenient method to determine the optimal time accurately. With the optimal delay time, the most uniformly distributed MAPbI₃ grains with the largest average grain size and the smoothest surface were obtained. Owing to the realization of homogeneous MAPbI₃ films combined with full coverage of perovskite on the substrate achieved by toluene washing at the critical point, open-circuit voltage, short-circuit current, fill factor, and power conversion efficiency of 1.11 V, 18.24 mA/cm², 77.47, and 15.54% were obtained.

Critical Intermediate Structure That Directs the Crystalline Texture and Surface Morphology of Organo-Lead Trihalide Perovskite

We have identified an often observed yet unresolved intermediate structure in a popular processing with dimethylformamide solutions of lead chloride and methylammonium iodide for perovskite solar cells. With subsecond time-resolved grazing-incidence X-ray scattering and X-ray photoemission spectroscopy, supplemental with ab initio calculation, the resolved intermediate structure (CH₃NH₃)₂PbI₂Cl₂·CH₃NH₃I features two-dimensional (2D) perovskite bilayers of zigzagged lead-halide octahedra and sandwiched CH₃NH₃I layers. Such intermediate structure reveals a hidden correlation between the intermediate phase and the composition of the processing solution. Most importantly, the 2D perovskite lattice of the intermediate phase is largely crystallographically aligned with the [110] planes of the three-dimensional perovskite cubic phase; consequently, with sublimation of Cl ions from the organo-lead octahedral terminal corners in prolonged annealing, the zigzagged octahedral layers of the intermediate phase can merge with the intercalated methylammonium iodide layers for templated growth of perovskite crystals. Regulated by annealing temperature and the activation energies of the intermediate and perovskite, deduced from analysis of temperature-dependent structural kinetics, the intermediate phase is found to selectively mature first and then melt along the layering direction for epitaxial conversion into perovskite crystals. The unveiled epitaxial conversion under growth kinetics controls might be general for solution-processed and intermediate-templated perovskite formation.

Solution-Processed Lithium-Doped ZnO Electron Transport Layer for Efficient Triple Cation (Rb, MA, FA) Perovskite Solar Cells

The current work reports the lithium (Li) doping of a low-temperature processed zinc oxide (ZnO) electron transport layer (ETL) for highly efficient, triple-cation-based MA_0.57FA_0.38Rb_0.05PbI₃ (MA: methylammonium, FA: formamidinium, Rb: rubidium) perovskite solar cells (PSCs). Lithium intercalation in the host ZnO lattice structure is dominated by interstitial doping phenomena, which passivates the intrinsic defects in ZnO film. In addition, interstitial Li doping also downshifts the Fermi energy position of Li-doped ETL by 30 meV, which contributes to the reduction of the electron injection barrier from the photoactive perovskite layer. Compared to the pristine ZnO, the power conversion efficiency (PCE) of the PSCs incorporating lithium-doped ZnO (Li-doped) is raised from 14.07 to 16.14%. The superior performance is attributed to the reduced current leakage, enhanced charge extraction characteristics, and mitigated trap-assisted recombination phenomena in Li-doped devices, thoroughly investigated by means of electrochemical impedance spectroscopy (EIS) analysis. Li-doped PSCs also exhibit lower photocurrent hysteresis than ZnO devices, which is investigated with regard to the electrode polarization phenomena of the fabricated devices.

One-Step Printable Perovskite Films Fabricated under Ambient Conditions for Efficient and Reproducible Solar Cells

Despite the potential of roll-to-roll processing for the fabrication of perovskite films, the realization of highly efficient and reproducible perovskite solar cells (PeSCs) through continuous coating techniques and low-temperature processing is still challenging. Here, we demonstrate that efficient and reliable CH₃NH₃PbI₃ (MAPbI₃) films fabricated by a printing process can be achieved through synergetic effects of binary processing additives, N-cyclohexyl-2-pyrrolidone (CHP) and dimethyl sulfoxide (DMSO). Notably, these perovskite films are deposited from premixed perovskite solutions for facile one-step processing under a room-temperature and ambient atmosphere. The CHP molecules result in the uniform and homogeneous perovskite films even in the one-step slot-die system, which originate from the high boiling point and low vapor pressure of CHP. Meanwhile, the DMSO molecules facilitate the growth of perovskite grains by forming intermediate states with the perovskite precursor molecules. Consequently, fully printed PeSC based on the binary additive system exhibits a high PCE of 12.56% with a high reproducibility.

Room-Temperature Formation of Highly Crystalline Multication Perovskites for Efficient, Low-Cost Solar Cells

A room-temperature perovskite material yielding a power conversion efficiency of 18.1% (stabilized at 17.7%) is demonstrated by judicious selection of cations. Both cesium and methylammonium are necessary for room-temperature formamidinium-based perovskite to obtain the photoactive crystalline perovskite phase and high-quality crystals. This room-temperature-made perovskite material shows great potential for low-cost, large-scale manufacturing such as roll-to-roll processing.

Enhanced Efficiency and Stability of Perovskite Solar Cells via Anti-Solvent Treatment in Two-Step Deposition Method

The low-cost inorganic-organic lead halide perovskite materials become particularly promising for solar cells with high photovoltaic conversion efficiency. The uniform and pinhole-free perovskite films play an important role for high-performance solar cells. We demonstrate an antisolvent treatment by controlling the PbI₂ morphology to enhance the perovskite conversion and photophysical properties, including high absorption, crystallinity, and rapid carrier transfer. The fabricated perovskite solar cells show tremendous PCE improvement to about 16.1% from 12% with less hysteresis, and retain over 90% initial PCE after 30 days in ambient and dark atmosphere. In prospect, this antisolvent treatment will be a feasible route to prepare high-quality perovskite films including favorite photophysical properties.

Interfacial engineering of hole transport layers with metal and dielectric nanoparticles for efficient perovskite solar cells

In this work, we have demonstrated the incorporation of metal (Ag NPs) and dielectric nanoparticles (SiO₂ NPs) into the hole transporting layers of inverted PSCs using facile deposition methods.

Ternary solvent for CH3NH3PbI3 perovskite films with uniform domain size

A ternary solvent system consisting of dimethyl sulfoxide (DMSO), γ-butyrolactone (GBL) and N-methyl-2-pyrrolidone (NMP) has been developed to improve the uniformity of CH₃NH₃PbI₃ (MAPbI₃) perovskite domains.

A high performance and low-cost hole transporting layer for efficient and stable perovskite solar cells

A F4TCNQ doped FDT HTL based PSC demonstrates 75% higher device stability than a conventional Li-TFSI doped FDT based PSC.

Ionic and Optical Properties of Methylammonium Lead Iodide Perovskite across the Tetragonal-Cubic Structural Phase Transition

Practical hybrid perovskite solar cells (PSCs) must endure temperatures above the tetragonal-cubic structural phase transition of methylammonium lead iodide (MAPbI₃ ). However, the ionic and optical properties of MAPbI₃ in such a temperature range, and particularly, dramatic changes in these properties resulting from a structural phase transition, are not well studied. Herein, we report a striking contrast at approximately 45 °C in the ionic/electrical properties of MAPbI₃ owing to a change of the ion activation energy from 0.7 to 0.5 eV, whereas the optical properties exhibit no particular transition except for the steady increase of the bandgap with temperature. These observations can be explained by the "continuous" nature of perovskite phase transition. We speculate that the critical temperature at which the ionic/electrical properties change, although related to crystal symmetry variation, is not necessarily the same temperature as when tetragonal-cubic structural phase transition occurs.

Curing of degraded MAPbI3perovskite films

Perovskite films were prepared using a one-step solution deposition. Such films degrade over time because of the ambient humidity. Curing of degraded films through X-ray, UV and electron beam irradiation is demonstrated.

Ab initio static and dynamic study of CH3NH3PbI3 degradation in the presence of water, hydroxyl radicals, and hydroxide ions

Density functional theory calculations are combined with the ab initio molecular dynamics and nudged elastic band techniques to unveil the microscopic details of CH₃NH₃PbI₃ degradation in the presence of water, hydroxyl radicals, and hydroxide ions.

Controlled growth of organic–inorganic hybrid CH3NH3PbI3 perovskite thin films from phase-controlled crystalline powders

High-performance MAPbI₃ perovskite solar cells with 16% efficiency are fabricated from phase-controlled crystalline powders.