Mesoporous Pt nanospheres with designed pore surface as highly active electrocatalyst

Size-dependent synthesis and catalytic activities of trimetallic PdAgCu mesoporous nanospheres in ethanol electrooxidation

Mesoporous noble metal nanocrystals have exhibited significant potential in electrocatalysis. However, it remains a big challenge to controllably synthesize sub-100 nm multimetallic mesoporous nanospheres (MNSs) with precisely tunable sizes and to further understand their size-dependent electrocatalytic performances. In this manuscript, a one-pot solution-phase strategy was developed for the formation of nanosized trimetallic PdAgCu MNSs with cylindrically open mesoporous nanochannels and continuous frameworks. The resultant Pd-based MNSs were precisely tailorable not only in terms of size (from 21 to 104 nm), but also in terms of elemental ratios and compositions (PdAgCu, PdAgPt, PdAgFe, PdPtCu, and PdCuRu). This system thus provided a facile yet straightforward means to evaluate the size effect of trimetallic MNSs in electrocatalysis. As an example, trimetallic PdAgCu MNSs with an average size of 36 nm exhibited the best activity of 4.64 A mgPd -1 in the electrocatalytic ethanol oxidation reaction, 1.1-1.7 fold higher than that of MNSs with smaller or larger sizes and 5.9 fold higher than that of commercial Pd black catalyst. By means of kinetic studies, the size-dependent electrocatalytic performance can be ascribed to the optimization and balance between electron transfer and mass transfer processes inside PdAgCu MNSs. We expect that the size effect of multimetallic MNS nanocatalysts presented here may provide a general synthetic methodology for rational design of size-dependent nanocatalysts for a broad range of applications.

Molecular reactors for synthesis of polymeric nanocomposites with noble metal nanoparticles for catalytic decomposition of 4-nitrophenol

HYPOTHESIS

A new, facile in-situ method for synthesis of polymeric nanocomposites (NCs) with nanoparticles (NPs) of Au, Pt and Pd is proposed. The method involves reduction-coupled sorption of Au(III), Pt(VI), and Pd(II), which avoids diffusion limitations, allowing the precipitation and stabilization of the NPs directly in the polymeric matrix.

EXPERIMENTS

The obtained nanomaterials were characterized by transmission electron microscopy (TEM), and Fourier-transformation infrared spectroscopy (FT-IR). NPs loaded into polymers were also investigated using X-ray diffraction (XRD).

FINDINGS

Based on the results, it was concluded that the amino functionalities simultaneously reduced noble metals ions and capped the NPs. The average diameter of the obtained AuNPs ranged from 25 to 109 nm, while reduction-coupled sorption was carried out in 1 and 3 mol L^-1 HCl solutions, respectively. Applying a 0.1 mol L^-1 HCl solution containing Au(III), Pd(II) and Pt(VI), a NC with AuNPs and cubic-like PdNPs was fabricated, while using a solution of the same composition, but in 3 mol L^-1 HCl, resulted in formation of a NC with flower-like PtNPs. Ultimately, the selected NC based on a resin with functionalities derived from 1-(2-aminoethyl)piperazine and with bi-metallic active sites, i.e. AuNPs and PdNPs, revealed catalytic activity in the reduction of 4-nitrophenol.

PtPdRh Mesoporous Nanospheres: An Efficient Catalyst for Methanol Electro-Oxidation

Porous multimetallic alloyed nanostructures possess unique physical and chemical properties to generate promising potential in fuel cells. However, the controllable synthesis of this kind of materials still remains challenging. Herein, we report a facile method for the one-pot, high-yield synthesis of trimetallic PtPdRh mesoporous nanospheres (PtPdRh MNs) under mild conditions. The resultant PtPdRh MNs possess the features of uniform shape, a narrow size distribution, plenty of well-defined mesopores, highly open structure, and multicomponent effects, which impart advantages such as large surface area, favorable mass diffusion, high utilization of electrocatalysts, and synergy among the various metal components. Benefitting from the synergetic effects originating from the multimetallic composition and unique mesoporous structure, the as-prepared PtPdRh MNs exhibit remarkably enhanced electrocatalytic performance for methanol oxidation reaction relative to bimetallic PtPd MNs and commercial Pt/C catalyst.

Citrate-Coated, Size-Tunable Octahedral Platinum Nanocrystals: A Novel Route for Advanced Electrocatalysts

The development of green and scalable syntheses for the preparation of size- and shape-controlled metal nanocrystals is of high interest in many areas, including catalysis, electrocatalysis, nanomedicine, and electronics. In this work, a new synthetic approach based on the synergistic action of physical parameters and reagents produces size-tunable octahedral Pt nanocrystals, without the use of catalyst-poisoning reagents and/or difficult-to-remove coatings. The synthesis requires sodium citrate, ascorbic acid, and fine control of the reduction rate in aqueous environment. Pt octahedral nanocrystals with particle size as low as 7 nm and highly developed {111} facets have been achieved, as demonstrated by transmission electron microscopy, X-ray diffraction, and electrochemical methods. The absence of sticky molecules together with the high quality of the surface makes these nanocrystals ideal candidates in electrocatalysis. Notably, 7 nm bismuth-decorated octahedral nanocrystals exhibit superior performance for the electrooxidation of formic acid in terms of both specific and mass activities.

Multimetallic Hollow Mesoporous Nanospheres with Synergistically Structural and Compositional Effects for Highly Efficient Ethanol Electrooxidation

Controlling the nanostructures and chemical compositions of the electrochemical nanocatalysts has been recognized as two prominent means to kinetically promote the electrocatalytic performance. Herein, we report a general "dual"-template synthesis methodology for the formation of multimetallic hollow mesoporous nanospheres (HMSs) with an adjustable interior hollow cavity and cylindrically opened mesoporous shell as a highly efficient electrocatalyst for ethanol oxidation reaction. Three-dimensional trimetallic PdAgCu HMSs were synthesized via in situ coreduction of Pd, Ag, and Cu precursors on "dual"-template structural directing surfactant of dioctadecyldimethylammonium chloride in optimal synthesis conditions. Due to synergistic advantages on hollow mesoporous nanostructures and multimetallic compositions, the resultant PdAgCu HMSs exhibited significantly enhanced electrocatalytic performance toward ethanol oxidation reaction with a mass activity of 5.13 A mg_Pd ^-1 at a scan rate of 50 mV s^-1 and operation stability (retained 1.09 A mg_pd ^-1 after the electrocatalysis). The "dual"-template route will open a new avenue to rationally design multimetallic HMSs with controlled functions for broad applications.

Micelle-Assisted Strategy for the Direct Synthesis of Large-Sized Mesoporous Platinum Catalysts by Vapor Infiltration of a Reducing Agent

Stable polymeric micelles have been demonstrated to serve as suitable templates for creating mesoporous metals. Herein, we report the utilization of a core-shell-corona type triblock copolymer of poly(styrene-b-2-vinylpyridine-b-ethylene oxide) and H₂PtCl₆·H₂O to synthesize large-sized mesoporous Pt particles. After formation of micelles with metal ions, the reduction process has been carried out by vapor infiltration of a reducing agent, 4-(Dimethylamino)benzaldehyde. Following the removal of the pore-directing agent under the optimized temperature, mesoporous Pt particles with an average pore size of 15 nm and surface area of 12.6 m²·g^-1 are achieved. More importantly, the resulting mesoporous Pt particles exhibit superior electrocatalytic activity compared to commercially available Pt black.

Photothermal exposure of polydopamine-coated branched Au-Ag nanoparticles induces cell cycle arrest, apoptosis, and autophagy in human bladder cancer cells

Purpose

Polydopamine-coated branched Au–Ag nanoparticles (Au–Ag@PDA NPs) exhibit good structural stability, biocompatibility, and photothermal performance, along with potential anticancer efficacy. Here, we investigated the cytotoxicity of Au–Ag@PDA NPs against human bladder cancer cells (T24 cells) in vitro and in vivo, as well as the underlying molecular mechanisms of photothermal therapy-induced T24 cell death.

Materials and methods

T24 cells were treated with different doses of Au–Ag@PDA NPs followed by 808 nm laser irradiation, and the effects on cell proliferation, cell cycle, apoptosis, and autophagy were analyzed. To confirm the mechanisms of inhibition, real-time PCR and Western blot analysis were used to evaluate markers of cell cycle, apoptosis, autophagy, and the AKT/ERK signaling pathway. Moreover, we evaluated the effects of the treatment on mitochondrial membrane potential and ROS generation to confirm the underlying mechanisms of inhibition. Finally, we tested the T24 tumor inhibitory effects of Au–Ag@PDA NPs plus laser irradiation in vivo using a xenograft mouse model.

Results

Au–Ag@PDA NPs, with appropriate laser irradiation, dramatically inhibited the proliferation of T24 cells, altered the cell cycle distribution by increasing the proportion of cells in the S phase, induced cell apoptosis by activating the mitochondria-mediated intrinsic pathway, and triggered a robust autophagy response in T24 cells. Moreover, Au–Ag@PDA NPs decreased the expression of phosphorylated AKT and ERK and promoted the production of ROS that function upstream of apoptosis and autophagy. In addition, Au–Ag@PDA NP-mediated photothermolysis also significantly suppressed tumor growth in vivo.

Conclusion

This preclinical study can provide a mechanistic basis for Au–Ag@PDA NP-mediated photothermal therapy toward promotion of this method in the clinical treatment of bladder cancer.

Coordination-Assisted Polymerization of Mesoporous Cobalt Sulfide/Heteroatom (N,S)-Doped Double-Layered Carbon Tubes as an Efficient Bifunctional Oxygen Electrocatalyst

It is a critical challenge to construct efficient precious-metal-free bifunctional oxygen electrocatalysts for fuel cell and metal-air batteries via structural and component engineering. Herein, a one-dimensional mesoporous double-layered tubular structure, where Co₉S₈ nanocrystals are incorporated into nitrogen, sulfur codoped carbon, is successfully synthesized via the coordinated-assisted polymerization and sacrificial template methods. The double-layered tubular structure provides for a large electrochemically active surface area and promotes fast mass transfer. Cobalt oxides/oxyhydroxides, which are evolved from the sulfides during the catalytic processes, as the main active sites efficiently catalyze the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), in cooperation with the Co-N-C and heteroatom-induced active sites. Hence, it demonstrates excellent bifunctional electrocatalytic activity with the overvoltage between the OER potential at 10 mA cm^-2 ( E₁₀) and ORR half-wave potential ( E_1/2) of 0.707 V, which is superior to most of precious-metal-free bifunctional oxygen electrocatalysts reported recently, as well as the state-of-art Pt/C and RuO₂ catalysts.

Engineering of Hollow PdPt Nanocrystals via Reduction Kinetic Control for Their Superior Electrocatalytic Performances

Synthesis of hollow metal nanocrystals (NCs) is greatly attractive for their high active surface areas, which gives rise to excellent catalytic activity. Taking PdPt alloy nanostructure as an example, we designed a synthetic tactic for the preparation of hollow metal nanostructures by delicate control over the difference in the reduction kinetic of metal precursors. At a high reduction rate difference, the Pd layer forms from H₂PdCl₄ and is subsequently etched, leading to the formation of a hollow space. A solid PdPt structure is achieved when the reduction rate of Pd and Pt precursor is comparable. Obviously, the hollow space and composition are tunable as well by adjusting the reduction rate difference. More importantly, the prepared hollow PdPt nanostructures exhibit a branched outer, porous wall, and rough hollow interior. The branched outer and rough hollow interior provide the higher density of unsaturated atoms, whereas the porous wall serves as channels connecting the inner, outer, and reactive agents. Moreover, the periodic self-consistent density function theory suggests that the d-band theory density of state of the PdPt nanoalloys is upshifted in comparison to the monometallic component, which will beneficial for improvement in their catalytic performances. Electrocatalytic tests reveal that the PdPt bimetallic NCs, especially for Pt₃₂Pd₆₈ nanostructures, show excellent catalytic activity and stability toward methanol oxidation reaction owing to their special structures as well as compositions.

One-step fabrication of bimetallic PtNi mesoporous nanospheres as an efficient catalyst for the oxygen reduction reaction

The controlled synthesis of Pt-based bimetallic porous nanostructures is highly important for the design of electrocatalysts with high performance. Herein, we report a one-step method for the direct synthesis of well-dispersed bimetallic PtNi mesoporous nanospheres (PtNi MNs) at high yield. Benefitting from the synergistic effect of composition (bimetallic PtNi) and structure (mesoporous and highly open structure), the as-obtained PtNi MNs exhibit superior catalytic activity and stability for the oxygen reduction reaction.

Biosynthesis of Ag-Pd bimetallic alloy nanoparticles through hydrolysis of cellulose triggered by silver sulfate

We report a simple but efficient biological route based on the hydrolysis of cellulose to synthesize Ag-Pd alloy nanoparticles (NPs) under hydrothermal conditions. X-ray powder diffraction, ultraviolet-visible spectroscopy and scanning transmission electron microscopy-energy dispersive X-ray analyses were used to study and demonstrate the alloy nature. The microscopy results showed that well-defined Ag-Pd alloy NPs of about 59.7 nm in size can be biosynthesized at 200 °C for 10 h. Fourier transform infrared spectroscopy indicated that, triggered by silver sulfate, cellulose was hydrolyzed into saccharides or aldehydes, which served as both reductants and stabilizers, and accounted for the formation of the well-defined Ag-Pd NPs. Moreover, the as-synthesized Ag-Pd nanoalloy showed high activity in the catalytic reduction of 4-nitrophenol by NaBH4.

Carbon nitride simultaneously boosted a PtRu electrocatalyst's stability and electrocatalytic activity toward concentrated methanol

Ruthenium dissolution is an inevitable issue for an anodic electrocatalyst in direct methanol fuel cells (DMFCs). Carbon nitride (C3N4) decoration derived from the carbonization of melamine simultaneously promoted a PtRu electrocatalyst's stability and electrocatalytic activity toward concentrated methanol ascribed to the additional active sites from C3N4.

Coercivity Modulation in Fe-Cu Pseudo-Ordered Porous Thin Films Controlled by an Applied Voltage: A Sustainable, Energy-Efficient Approach to Magnetoelectrically Driven Materials

Fe-Cu films with pseudo-ordered, hierarchical porosity are prepared by a simple, two-step procedure that combines colloidal templating (using sub-micrometer-sized polystyrene spheres) with electrodeposition. The porosity degree of these films, estimated by ellipsometry measurements, is as high as 65%. The resulting magnetic properties can be controlled at room temperature using an applied electric field generated through an electric double layer in an anhydrous electrolyte. This material shows a remarkable 25% voltage-driven coercivity reduction upon application of negative voltages, with excellent reversibility when a positive voltage is applied, and a short recovery time. The pronounced reduction of coercivity is mainly ascribed to electrostatic charge accumulation at the surface of the porous alloy, which occurs over a large fraction of the electrodeposited material due to its high surface-area-to-volume ratio. The emergence of a hierarchical porosity is found to be crucial because it promotes the infiltration of the electrolyte into the structure of the film. The observed effects make this material a promising candidate to boost energy efficiency in magnetoelectrically actuated devices.

Tri-metallic PtPdAu mesoporous nanoelectrocatalysts

The design of mesoporous materials with multi-metallic compositions is highly important for various electrocatalytic applications. In this paper, we demonstrate an efficient method to directly fabricate tri-metallic PtPdAu mesoporous nanoparticles (PtPdAu MNs) in a high yield, which is simply performed by heating treatment of the reaction mixture aqueous solution at 40 °C for 4 h. Profiting from its mesoporous structure and multi-metallic components, the as-prepared PtPdAu MNs exhibit enhanced electrocatalytic activities toward both methanol oxidation reaction and oxygen reduction reaction in comparison with bi-metallic PtPd MNs and commercial Pt/C catalyst.

Selective Etching Induced Synthesis of Hollow Rh Nanospheres Electrocatalyst for Alcohol Oxidation Reactions

The hollow noble metal nanostructures have attracted wide attention in catalysis/electrocatalysis. Here a two-step procedure for constructing hollow Rh nanospheres (Rh H-NSs) with clean surface is described. By selectively removing the surfactant and Au core of Au-core@Rh-shell nanostructures (Au@Rh NSs), the surface-cleaned Rh H-NSs are obtained, which contain abundant porous channels and large specific surface area. The as-prepared Rh H-NSs exhibit enhanced inherent activity for the methanol oxidation reaction (MOR) compared to state-of-the-art Pt nanoparticles in alkaline media. Further electrochemical experiments show that Rh H-NSs also have high activity for the electrooxidation of formaldehyde and formate (intermediate species in the course of the MOR) in alkaline media. Unfortunately, Rh H-NSs have low electrocatalytic activity for the ethanol and 1-propanol oxidation reactions in alkaline media. All electrochemical results indicate that the order of electrocatalytic activity of Rh H-NSs for alcohol oxidation reaction is methanol (C1 ) > ethanol (C2 ) > 1-propanol (C3 ). This work highlights the synthesis route of Rh hollow nanostructures, and indicates the promising application of Rh nanostructures in alkaline direct methanol fuel cells.

Overgrowth Versus Galvanic Replacement: Mechanistic Roles of Pd Seeds during the Deposition of Pd-Pt

Here, a systematic study of the roles played by Pd seeds during seed-mediated coreduction of Pd-Pt is presented. Either nanoparticles with porous, hollow architectures or concave nanocubes were achieved, depending on whether the synthesis conditions favored galvanic replacement or overgrowth. Prior works have shown that the galvanic replacement reaction between seeds and a precursor can be suppressed by introducing a faster, parallel reaction that removes one of the reagents (e.g., adatom generation in solution rather than surface-catalyzed precursor reduction). Here, we show that the galvanic replacement reaction depends on the size and concentration of the Pd seeds; the former of which can be manipulated during the course of the reaction through the use of a secondary reducing agent. This insight will guide future syntheses of multimetallic nanostructures by seeded methods, allowing for a range of nanocrystals to be precisely engineered for a variety of applications.

Direct synthesis of bimetallic PtCo mesoporous nanospheres as efficient bifunctional electrocatalysts for both oxygen reduction reaction and methanol oxidation reaction

The engineering of electrocatalysts with high performance for cathodic and/or anodic catalytic reactions is of great urgency for the development of direct methanol fuel cells. Pt-based bimetallic alloys have recently received considerable attention in the field of fuel cells because of their superior catalytic performance towards both fuel molecule electro-oxidation and oxygen reduction. In this work, bimetallic PtCo mesoporous nanospheres (PtCo MNs) with uniform size and morphology have been prepared by a one-step method with a high yield. The as-made PtCo MNs show superior catalytic activities for both oxygen reduction reaction and methanol oxidation reaction relative to Pt MNs and commercial Pt/C catalyst, attributed to their mesoporous structure and bimetallic composition.

Three-Dimensional Macroporous Co-Embedded N-Doped Carbon Interweaving with Carbon Nanotubes as Excellent Bifunctional Catalysts for Zn-Air Batteries

Highly efficient noble metal-free bifunctional catalysts for expediting the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in metal-air batteries or fuel cells are still challenging and imperative. In this work, we report a facile and scalable method for syntheizing three-dimensional (3D) macroporous Co-embedded N-doped carbon interconnecting with in situ growth carbon nanotubes (CNTs). The as-synthesized material exhibits great electrocatalytic performance for ORR with an onset potential of 0.901 V vs RHE as well as a high limited current density of 4.83 mA/cm² in an alkaline electrolyte under a rotation speed of 1600 rpm at 5 mV/s. Furthermore, this 3D porous carbon also shows good electrocatalytic performance for OER in an alkaline electrolyte. This high electrocatalytic performance is mainly attributed to its large specific surface area and highly conductive CNTs and the synergistic effect between Co-active species and the carbon framework. The result of a two-electrode Zn-air battery based on this carbon material achieves a peak density of 163 mW/cm² at a voltage of 0.63 V, indicating the great potential of the catalyst for battery application.

Nanoreactors stable up to 200 °C: a class of high temperature microemulsions composed solely of ionic liquids

A class of microemulsions solely consisting of ionic liquids was shown to maintain nanoscale droplets up to about 200 °C, and this unique property was used to prepare porous Pt where the microemulsions played the roles of a solvent, a template and a reductant.

B,N,S tri-doped reduced graphite oxide–cobalt oxide composite: a bifunctional electrocatalyst for enhanced oxygen reduction and oxygen evolution reactions

Cobalt oxide with B,N,S tri-doped reduced graphite oxide exhibits synergistic effects to enhance ORR activity.

PtAl truncated octahedron nanocrystals for improved formic acid electrooxidation

We prepared well-defined PtAl truncated octahedron alloy nanocrystals with a large density of surface defects, which exhibit enhanced electroactivity in FOR.

Ag–Au nanoparticles encapsulated inside porous hollow carbon nanospheres: a molecular dynamics study

We have simulated bare Ag/Au nanoclusters and Ag/Au nanoclusters encapsulated into hollow carbon spheres (AgAu@C) with various structures (core–shell, hollow core–shell, rattle core–shell, and alloy nanoclusters) from 300 to 700 K.

Shape-control of super-branched Pd–Cu alloys with enhanced electrocatalytic performance for ethylene glycol oxidation

Pd–Cu alloys with adjustable morphologies were synthesized and examined as nanocatalysts for electro-oxidation of ethylene glycol.

Rational one-step synthesis of porous PtPdRu nanodendrites for ethanol oxidation reaction with a superior tolerance for CO-poisoning

Precise fabrication of porous ternary Pt-based nanodendrites is very important for electrochemical energy conversion owing to high surface area and great molecular accessibility of these nanodendrites. Herein, PtPdRu porous nanodendrites (PNDs) were prepared via a facile one-step ultrasonic irradiation approach at room temperature. Intriguingly, the ultrasonic irradiation drove the formation of PtPdRu PNDs with spatially interconnected porous structures, whereas magnetic stirring produced PtPdRu nanoflowers (NFs) with less porosity. The formation mechanism was ascribed to the acoustic cavitation effect and fast-reduction kinetics under sonication. The as-made PtPdRu PNDs displayed a superior catalytic performance towards ethanol oxidation reaction with a high tolerance for CO-poisoning as compared to PtPdRu NFs, PtPd NDs, and commercial Pt/C catalyst.

Rational geometrical engineering of palladium sulfide multi-arm nanostructures as a superior bi-functional electrocatalyst

Geometrical tunability offers sharp edges and an open-armed structure accompanied with a high electrochemical active surface area to ensure the efficient and effective utilization of materials by exposing the electrochemical active sites for facile accessibility of reactant species. Herein, we report a one-step, single-pot, surfactant-free, electroless, and economic route to synthesize palladium sulfide nanostructures with different geometries at mild temperatures and their catalytic properties towards the oxygen reduction reaction (ORR) and methanol electro-oxidation (MOR). For ORR, the positive on-set, half wave potentials, smaller Tafel slope, high electrochemical active surface area, large roughness factor, and better cyclic stability of the proposed nanostructures as compared to those of the commercial state-of-the-art Pt-C/PdS catalysts suggest their superiority in an alkaline medium. In addition, high mass activity (J_f ∼ 715 mA mg^-1), in comparison with that of the commercial state-of-the-art Pt-C/PdS catalysts (J_f ∼ 138/41 mA mg^-1, respectively), and high J_f/J_b (1.52) along with the superior operational stability of the multi-arm palladium sulfide nanostructures towards MOR advocates the bi-functional behavior of the catalyst and its potential as a promising Pt-free anode/cathode electrocatalyst in fuel cells.

Pt Nanoparticles Densely Coated on SnO2-Covered Multiwalled Carbon Nanotubes with Excellent Electrocatalytic Activity and Stability for Methanol Oxidation

A new electrocatalyst exhibiting enhanced activity and stability is designed from SnO₂-covered multiwalled carbon nanotubes coated with 85 wt % ratio Pt nanoparticles (NPs). This catalyst showed a mass activity 6.2 times as active as that of the commercial Pt/C for methanol oxidation, owing to the unique one-dimensional structure. Moreover, the durability and antipoisoning ability were also improved greatly. The enhanced intrinsic performance was ascribed to the densely connected networks of Pt NPs on the SnO₂ NPs.

Self-Assembled Dendritic Pt Nanostructure with High-Index Facets as Highly Active and Durable Electrocatalyst for Oxygen Reduction

The durability issues of Pt catalyst should be resolved for the commercialization of proton exchange membrane fuel cells. Nanocrystal structures with high-index facets have been recently explored to solve the critical durability problem of fuel cell catalysts as Pt catalysts with high-index facets can preserve the ordered surfaces without change of the original structures. However, it is very difficult to develop effective and practical synthetic methods for Pt-based nanostructures with high-index facets. The current study describes a simple one-pot synthesis of self-assembled dendritic Pt nanostructures with electrochemically active and stable high-index facets. Pt nanodendrites exhibited 2 times higher ORR activity and superior durability (only 3.0 % activity loss after 10 000 potential cycles) than a commercial Pt/C. The enhanced catalytic performance was elucidated by the formation of well-organized dendritic structures with plenty of reactive interfaces among 5 nm-sized Pt particles and the coexistence of low- and high-index facets on the particles.