Rational chemical doping of metal halide perovskites

Circularly Polarized Photodetectors Based on Chiral Materials: A Review

Circularly polarized light (CPL) plays an important role in many photonic techniques, including tomographic scanning based on circular polarization ellipsometry, optical communication and information of spin, and quantum-based optical calculation and information processing. To fully exploit the functions of CPL in these fields, integrated photoelectric sensors capable of detecting CPL are essential. Photodetectors based on chiral materials can directly detect CPL due to their intrinsic optical activity, without the need to be coupled with polarizers and quarter-wave plates as in conventional photodetectors. This review summarizes the recent research progress in CPL photodetectors based on chiral materials. We first briefly introduce the CPL photodetectors based on different types of chiral materials and their working principles. Finally, current challenges and future opportunities in the development of CPL photodetectors are prospected.

Great Amplification of Circular Polarization Sensitivity via Heterostructure Engineering of a Chiral Two-Dimensional Hybrid Perovskite Crystal with a Three-Dimensional MAPbI3 Crystal

Chiral hybrid perovskites have brought an unprecedented opportunity for circularly polarized light (CPL) detection. However, the circular polarization sensitivity of such a detector remains extremely low because of the high exciton recombination rate in those single-phase hybrid perovskites. Here, a heterostructure construction strategy is proposed to reduce the electron-hole recombination rate in a chiral hybrid perovskite and achieve CPL detectors with greatly amplified circular polarization sensitivity. A heterostructure crystal, namely, [(R)-MPA]2MAPb2I7/MAPbI3 ((R)-MPA = (R)-methylphenethylamine, MA = methylammonium), has been successfully created by integrating a chiral two-dimensional (2D) perovskite with its three-dimensional counterpart via solution-processed heteroepitaxy. Strikingly, the sharp interface of the as-grown heterostructure crystal facilitates the formation of a built-in electric field, enabling the combined concepts of charge transfer and chirality transfer, which effectively reduces the recombination probability for photogenerated carriers while retaining chiroptical activity of chiral 2D perovskite. Thereby, the resultant CPL detector exhibits significantly amplified circular polarization sensitivity at zero bias with an impressive anisotropy factor up to 0.67, which is about six times higher than that of the single-phase [(R)-MPA]2MAPb2I7 (0.1). As a proof-of-concept, the strategy we presented here enables a novel path to modulate circular polarization sensitivity and will be helpful to design chiral hybrid perovskites for advanced chiroptical devices.

Accelerated design of promising mixed lead-free double halide organic-inorganic perovskites for photovoltaics using machine learning

Mixed double halide organic-inorganic perovskites (MDHOIPs) exhibit both good stability and high power conversion efficiency and have been regarded as attractive photovoltaic materials. Nevertheless, due to the complexity of structures, large-scale screening of thousands of possible candidates remains a great challenge. In this work, advanced machine learning (ML) techniques and first-principles calculations were combined to achieve a rapid screening of MDHOIPs for solar cells. Successfully, 204 stable lead-free MDHOIPs with optimal bandgaps were selected out of 11 370 candidates. The accuracy of ML models for perovskite structure formability and bandgap is over 94% and 97%, respectively. Moreover, representative MDHOIP candidates, MA₂GeSnI₄Br₂ and MA₂InBiI₂Br₄, stand out with suitable direct bandgaps, light carrier effective masses, small exciton binding energies, strong visible light absorption, and good stability against decomposition.

Solid solutions of flexible host-guest supramolecules for tuning molecular motion and phase transitions

By utilizing a supramolecular complex rather than an individual molecule as a deformable and elastic substitutional component, we put forward a solid-solution strategy and demonstrate an example of how two related yet non-isostructural crystalline host-guest compounds can form molecular solid solutions. Interestingly, such a strategy can effectively and continuously modulate the molecular motion and phase transition in them, as revealed by the variable-temperature/frequency dielectric responses.

State of the Art and Prospects for Halide Perovskite Nanocrystals

Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research.

PFM (piezoresponse force microscopy)-aided design for molecular ferroelectrics

With prosperity, decay, and another spring, molecular ferroelectrics have passed a hundred years since Valasek first discovered ferroelectricity in the molecular compound Rochelle salt. Recently, the proposal of ferroelectrochemistry has injected new vigor into this century-old research field. It should be highlighted that piezoresponse force microscopy (PFM) technique, as a non-destructive imaging and manipulation method for ferroelectric domains at the nanoscale, can significantly speed up the design rate of molecular ferroelectrics as well as enhance the ferroelectric and piezoelectric performances relying on domain engineering. Herein, we provide a brief review of the contribution of the PFM technique toward assisting the design and performance optimization of molecular ferroelectrics. Relying on the relationship between ferroelectric domains and crystallography, together with other physical characteristics such as domain switching and piezoelectricity, we believe that the PFM technique can be effectively applied to assist the design of high-performance molecular ferroelectrics equipped with multifunctionality, and thereby facilitate their practical utilization in optics, electronics, magnetics, thermotics, and mechanics among others.

Exploring a Fatigue-Free Layered Hybrid Perovskite Ferroelectric for Photovoltaic Non-Volatile Memories

Through a functional unit-transmutation strategy, a fatigue-free layered hybrid perovskite ferroelectric (C₆ H₅ CH₂ NH₃ )₂ CsPb₂ Br₇ (BCPB) has been developed, which demonstrates stable spontaneous polarization (P_s ) of 6.5 μC cm^-2 and high Curie temperature up to 425 K. Meanwhile, BCPB shows splendid bulk photovoltaic effect (BPVE) properties with noticeable zero-bias photocurrent density (5 μA cm^-2 ), and high on/off switching ratio of current (over 3×10⁵ ); these merits even overmatch the most known ferroelectric semiconductor BiFeO₃ . The unique structure with self-regulated net electrical charged layers gives rise to the fatigue-free feature of P_s and BPVE (no significant fatigue after 10⁸ polarity switching cycles), promoting the potential applications of BCPB in photovoltaic non-volatile memories. This work offers an efficient approach for exploring fatigue-free semiconducting ferroelectrics as well as excavates their further applications in next-generation electronic devices.

Template syntheses of diverse haloargentates with reversible photochromism behaviors and efficient photocatalytic properties

A series of haloargentates have been prepared exhibiting a reversible photochromic phenomenon and efficient photocatalytic properties.

Stable near white light emission in CsPbCl3 perovskite quantum dots by incorporating Al3+/Mn2+ ions

All inorganic cesium lead halides (CsPbX3, X = Cl, Br, I) are promising materials and have been developed in recent years for various optoelectronic devices and applications because of their excellent optoelectronic properties. Regardless of their excellent characteristics their stability is still uncertain and it is challenging task to obtain stable emission in CsPbX3 perovskite quantum dots (PQDs), hence limiting their practical optoelectronic application. In this context, several approaches have been used like an-ion exchange, ion doping, and core–shell structure to enhance PQDs stability. Herein, we synthesized dual ion co-doped Al3+/Mn2+ CsPbCl3 PQDs for stable light emitting diodes through traditional hot injection method for the first time. By adjusting molar concentration of Al3+/Mn2+ CsPbCl3, co-doped PQDs were successfully prepared. The co-doped PQDs exhibit tunable emission, covering a wide range under UV excitation. Moreover, these high luminescent co-doped PQDs were used to fabricate WLEDs, displaying stable near white light emission with the chromaticity coordination at (0.35, 0.28). Some new evidence has emerged, although some aspects of Mn2+ and Al3+ doping are considered to be consistent with previous conclusions. This viewpoint incorporates all of these details and focuses on the path of transition metal ion doping to perovskite nanostructures and offers an overview for possible potential studies.

Above room-temperature dielectric switching and semiconducting properties of a layered organic-inorganic hybrid compound: (C6H12N)2Pb(NO3)4

The well-studied star compound, CH3NH3PbI3, has attracted plenty of attention because of its remarkable optical and electrical properties. Consequently, new switching multifunctional hybrid compounds can be widely used in many fields such as solar cells, light-emitting diodes, optical data storage and so on. Therefore, switching multifunctional hybrid compounds with dielectric and semiconducting properties simultaneously will also find roles in the next generation of optoelectronic coupling materials. In fact, discovering an effective method to synthesize (multi)functional hybrid materials remains a pressing challenge. Thanks to the "quasi-spherical theory" proposed by Xiong et al., we used 7-azabicyclo[2.2.1]heptane as the quasi-spherical cation to construct molecule-based crystalline materials that exhibit responsive properties. Then, we tried to exploit the knowledge of crystal engineering and coordination chemistry to explain (multi)functional molecular materials. A layered organic-inorganic hybrid compound, (C6H12N)2Pb(NO3)4 (1), was grown and its dielectric switching property and semiconducting behaviour were investigated. Insights from differential scanning calorimetry measurements, variable-temperature X-ray structural studies, and dielectric spectroscopy revealed the origin of the phase transition, which is related to the motion of the organic ammonium and inorganic framework in solid-state crystals. Furthermore, 1 is also a wide bandgap semiconductor with an optical bandgap of 3.53 eV. The realization of switching and semiconducting properties simultaneously in layered Pb-based perovskites has a great significance toward research into hybrid compounds and the development of dielectric-optoelectronic integrated materials.

Unveiling the Excited-State Dynamics of Mn2+ in 0D Cs4PbCl6 Perovskite Nanocrystals

Doping is an effective strategy for tailoring the optical properties of 0D Cs4PbX6 (X = Cl, Br, and I) perovskite nanocrystals (NCs) and expanding their applications. Herein, a unique approach is reported for the controlled synthesis of pure-phase Mn2+-doped Cs4PbCl6 perovskite NCs and the excited-state dynamics of Mn2+ is unveiled through temperature-dependent steady-state and transient photoluminescence (PL) spectroscopy. Because of the spatially confined 0D structure of Cs4PbCl6 perovskite, the NCs exhibit drastically different PL properties of Mn2+ in comparison with their 3D CsPbCl3 analogues, including significantly improved PL quantum yield in solid form (25.8%), unusually long PL lifetime (26.2 ms), large exciton binding energy, strong electron-phonon coupling strength, and an anomalous temperature evolution of Mn2+-PL decay from a dominant slow decay (in tens of ms scale) at 300 K to a fast decay (in 1 ms scale) at 10 K. These findings provide fundamental insights into the excited-state dynamics of Mn2+ in 0D Cs4PbCl6 NCs, thus laying a foundation for future design of 0D perovskite NCs through metal ion doping toward versatile applications.

Photoredox Organic Synthesis Employing Heterogeneous Photocatalysts with Emphasis on Halide Perovskite

Lately, heterogeneous semiconductor materials have been explored as an emerging type of efficient photocatalyst for photoredox organic synthesis. Among these semiconductors, lead halide perovskite materials demonstrate unique properties towards excellent charge separation and charge transfer, extremely long charge carrier migration, high efficiency in visible light absorption, and long excited states lifetimes, etc., as proved in ground-breaking solar cell applications, garnering necessary merits for an efficient catalytic system for photoredox organic reactions. Here, the latest progress in heterogeneous semiconductor materials towards this endeavor is examined, with particular emphasis on lead halide perovskite nanocrystals (NCs) in photocatalytic organic synthesis.

Phase Transition and Band Gap Regulation by Halogen Substituents on the Organic Cation in Organic-Inorganic Hybrid Perovskite Semiconductors

In the last decade, hybrid materials have received widespread attention. In particular, hybrid lead halide perovskite-type semiconductors are very attractive owing to their great flexibility in band gap engineering. Here, by using precise molecular modifications, three one-dimensional perovskite-type semiconductor materials are designed and obtained: [Me₃ PCH₂ X][PbBr₃ ] (X=H, F, and Cl for compounds 1, 2, and 3, respectively). The introduction of a heavier halogen atom (F or Cl) to [Me₄ P]⁺ increases the potential energy barrier required for the tumbling motion of the cation, hence achieving the transformation of the phase transition temperature from low temperature (192 K) to room temperature (285 K) and high temperature (402.3 K). Moreover, the optical band gaps reveal a broadening trend with 3.176 eV, 3.215 eV, and 3.376 eV along the H→F→Cl series, which is attributed to the formation of the structural distortion.

Structurally Tunable Two-Dimensional Layered Perovskites: From Confinement and Enhanced Charge Transport to Prolonged Hot Carrier Cooling Dynamics

Two-dimensional (2D) layered metal halide perovskites are potential alternatives to three-dimensional perovskites in optoelectronic applications owing to their improved photostabilities and chemical stabilities. Recent investigations of 2D metal halide perovskites have demonstrated interesting optical and electronic properties of various structures that are controlled by their elemental composition and organic spacers. However, photovoltaic devices that utilize 2D perovskites suffer from poor device efficiency due to inefficient charge carrier separation and extraction. In this Perspective, we shed light on confinement control and structural variation strategies that provide better parameters for the efficient collection of charges. The influence of these strategies on the exciton binding energies, charge-carrier mobilities, hot-carrier dynamics, and electron-phonon coupling in 2D perovskites is thoroughly discussed; these parameters highlight unique opportunities for further system optimization. Beyond the tunability of these fundamental parameters, we conclude this Perspective with the most notable strategies for attaining 2D perovskites with reduced bandgaps to better suit photovoltaic applications.

Emergence of Impurity-Doped Nanocrystal Light-Emitting Diodes

In recent years, impurity-doped nanocrystal light-emitting diodes (LEDs) have aroused both academic and industrial interest since they are highly promising to satisfy the increasing demand of display, lighting, and signaling technologies. Compared with undoped counterparts, impurity-doped nanocrystal LEDs have been demonstrated to possess many extraordinary characteristics including enhanced efficiency, increased luminance, reduced voltage, and prolonged stability. In this review, recent state-of-the-art concepts to achieve high-performance impurity-doped nanocrystal LEDs are summarized. Firstly, the fundamental concepts of impurity-doped nanocrystal LEDs are presented. Then, the strategies to enhance the performance of impurity-doped nanocrystal LEDs via both material design and device engineering are introduced. In particular, the emergence of three types of impurity-doped nanocrystal LEDs is comprehensively highlighted, namely impurity-doped colloidal quantum dot LEDs, impurity-doped perovskite LEDs, and impurity-doped colloidal quantum well LEDs. At last, the challenges and the opportunities to further improve the performance of impurity-doped nanocrystal LEDs are described.

Molecule-based nonlinear optical switch with highly tunable on-off temperature using a dual solid solution approach

Nonlinear optical switches that reversibly convert between on/off states by thermal stimuli are promising for applications in the fields of photoelectronics and photonics. Currently one main drawback for practical application lies in the control of their switch temperature, especially for the temperature range near room temperature. By mixed melting treatment, here we describe an alloy-like nonlinear optical switch with tunable switch temperature via a dual solid solution approach within the coordination polymer system. We initially prepare a coordination polymer (i-PrNHMe2)[Cd(SCN)3], which functions as a high-contrast thermoresponsive nonlinear optical switch originating from a phase transition at around 328 K. Furthermore, by taking advantage of a synergistic dual solid solution effect, the melt mixing of it with its analogue (MeNHEt2)[Cd(SCN)3], which features an unequal anionic chain templated by an isomeric ammonium, can afford coordination polymer solid solutions with switch temperatures that are tunable in a range of 273-328 K merely by varying the component ratio.

Highly Efficient Blue Emission from Self-Trapped Excitons in Stable Sb3+-Doped Cs2NaInCl6 Double Perovskites

Highly efficient blue-emitting three-dimensional (3D) lead-free halide perovskites with excellent stability have attracted worldwide attention. Herein, a doping route was adopted to incorporate Sb³⁺ ions into the Cs₂NaInCl₆ for decorating the electronic band structure. Due to the moderate electron-phonon coupling, the Sb³⁺-doped Cs₂NaInCl₆ double perovskites showed a narrow and relatively unusual blue emission of self-trapped excitons (STEs). Density functional theory (DFT) calculation indicated that the doped Sb³⁺ ions could break the parity-forbidden transition rule and modulate the density of state (DOS) population effectively to boost the PLQY of STEs drastically. The optimized Sb³⁺:Cs₂NaInCl₆ exhibited a PLQY of up to 75.89% and excellent stability under the consecutive illumination of 365 nm UV light for 1000 h. This kind of highly efficient lead-free Sb³⁺-doped Cs₂NaInCl₆ double perovskites may overcome the bottlenecks of severe toxicity and insufficient stability and therefore have an extensive application in the scarce blue photonic and optoelectronic fields.

Near-Unity Red Mn2+ Photoluminescence Quantum Yield of Doped CsPbCl3 Nanocrystals with Cd Incorporation

Although Mn²⁺ doping in semiconductor nanocrystals (NCs) has been studied for nearly three decades, the near 100% photoluminescence (PL) quantum yield (QY) of Mn²⁺ emission has never been realized so far. Herein, greatly improved PL QYs of Mn²⁺ emissions are reported in Mn²⁺-doped CsPbCl₃ NCs with various Mn²⁺ doping concentrations after CdCl₂ post-treatment at room temperature. Specifically, the near-unity QY and near single-exponential decay of red Mn²⁺ emission peaking at 627 nm in doped CsPbCl₃ NCs are obtained for the first time. The temperature dependence of steady-state and time-resolved PL spectra reveals that the CdCl₂ post-treatment significantly reduces the nonradiative defect states and enhances the energy transfer from host to Mn²⁺ ions. Moreover, the Mn²⁺:CsPbCl₃ NCs after CdCl₂ post-treatment exhibit robust stability and high PL QYs after multipurification. The results will provide an effective route to obtain doped perovskite NCs with high performance for white lighting emitting diodes.

Homo- and Heterovalent Doping-Mediated Self-Trapped Exciton Emission and Energy Transfer in Mn-Doped Cs2Na1-xAgxBiCl6 Double Perovskites

Double perovskites exhibit low toxicity, intrinsic thermodynamic stability, and small carrier effective mass. Herein, a novel doping route was adopted to incorporate Mn ions into Cs₂Na_1-xAg_xBiCl₆ double perovskites for engineering the band gap and tailoring the energy transfer. The as-prepared Cs₂Na_1-xAg_xBiCl₆ (0 < x < 1) exhibited excellent photoluminescence and a broad self-trapped exciton (STE) band from 500 to 900 nm, which exhibited an abnormal emission peak blue shift with increasing temperature. For Mn-doped Cs₂Na_1-xAg_xBiCl₆, the two photoluminescence (PL) bands from d-d transition emission of Mn ions and STEs were always observed simultaneously in the PL window. The distinct energy-transfer channel from the Mn²⁺ ion guest to the double-perovskite host resulted in the dominant Mn²⁺ emission. Our results will be helpful for further understanding the nature of the photophysics of double perovskites.

Nonlinear organic–inorganic halide hybrids containing unprecedented linear [MIX2]− coordination units and quasi-two-dimensional lone pairs

A first example of monovalent-metal-based hybrid halides [N(CH₃)₄]MCl₂ (M = Ga⁺, In⁺) with zero-dimensional configuration containing unprecedented linear [GaCl₂]/[InCl₂] units have been designed and synthesized.

Doping and ion substitution in colloidal metal halide perovskite nanocrystals

The past decade has witnessed tremendous advances in synthesis of metal halide perovskites and their use for a rich variety of optoelectronics applications. Metal halide perovskite has the general formula ABX3, where A is a monovalent cation (which can be either organic (e.g., CH3NH3+ (MA), CH(NH2)2+ (FA)) or inorganic (e.g., Cs+)), B is a divalent metal cation (usually Pb2+), and X is a halogen anion (Cl-, Br-, I-). Particularly, the photoluminescence (PL) properties of metal halide perovskites have garnered much attention due to the recent rapid development of perovskite nanocrystals. The introduction of capping ligands enables the synthesis of colloidal perovskite nanocrystals which offer new insight into dimension-dependent physical properties compared to their bulk counterparts. It is notable that doping and ion substitution represent effective strategies for tailoring the optoelectronic properties (e.g., absorption band gap, PL emission, and quantum yield (QY)) and stabilities of perovskite nanocrystals. The doping and ion substitution processes can be performed during or after the synthesis of colloidal nanocrystals by incorporating new A', B', or X' site ions into the A, B, or X sites of ABX3 perovskites. Interestingly, both isovalent and heterovalent doping and ion substitution can be conducted on colloidal perovskite nanocrystals. In this review, the general background of perovskite nanocrystals synthesis is first introduced. The effects of A-site, B-site, and X-site ionic doping and substitution on the optoelectronic properties and stabilities of colloidal metal halide perovskite nanocrystals are then detailed. Finally, possible applications and future research directions of doped and ion-substituted colloidal perovskite nanocrystals are also discussed.

Materials chemistry and engineering in metal halide perovskite lasers

The invention and development of the laser have revolutionized science, technology, and industry. Metal halide perovskites are an emerging class of semiconductors holding promising potential in further advancing the laser technology. In this Review, we provide a comprehensive overview of metal halide perovskite lasers from the viewpoint of materials chemistry and engineering. After an introduction to the materials chemistry and physics of metal halide perovskites, we present diverse optical cavities for perovskite lasers. We then comprehensively discuss various perovskite lasers with particular functionalities, including tunable lasers, multicolor lasers, continuous-wave lasers, single-mode lasers, subwavelength lasers, random lasers, polariton lasers, and laser arrays. Following this a description of the strategies for improving the stability and reducing the toxicity of metal halide perovskite lasers is provided. Finally, future research directions and challenges toward practical technology applications of perovskite lasers are provided to give an outlook on this emerging field.

Prediction of ternary fluorooxoborates with coplanar triangular units [BOxF3−x]x− from first-principles

From first-principles prediction, we got all the basic structural units of fluorooxoborates, namely, tetrahedral elements [BO_xF_4−x] (x = 1,2,3) like [BO₄] and triangular elements [BO_xF_3−x] (x = 1,2) like [BO₃].

Rare-earth-containing perovskite nanomaterials: design, synthesis, properties and applications

As star material, perovskites have been widely used in the fields of optics, photovoltaics, electronics, magnetics, catalysis, sensing, etc. However, some inherent shortcomings, such as low efficiency (power conversion efficiency, external quantum efficiency, etc.) and poor stability (against water, oxygen, ultraviolet light, etc.), limit their practical applications. Downsizing the materials into nanostructures and incorporating rare earth (RE) ions are effective means to improve their properties and broaden their applications. This review will systematically summarize the key points in the design, synthesis, property improvements and application expansion of RE-containing (including both RE-based and RE-doped) halide and oxide perovskite nanomaterials (PNMs). The critical factors of incorporating RE elements into different perovskite structures and the rational design of functional materials will be discussed in detail. The advantages and disadvantages of different synthesis methods for PNMs will be reviewed. This paper will also summarize some practical experiences in selecting suitable RE elements and designing multi-functional materials according to the mechanisms and principles of REs promoting the properties of perovskites. At the end of this review, we will provide an outlook on the opportunities and challenges of RE-containing PNMs in various fields.

Polar CsPbBr3-based Dion–Jacobson hybrid for promising UV photodetection

A CsPbBr₃-based polar single crystal of 2D bilayered Dion–Jacobson type hybrid perovskites has been for the first time discovered for promising UV photodetection.

Tailored Synthesis of an Unprecedented Pb-Mn Heterometallic Halide Hybrid with Enhanced Emission

Organic-inorganic lead halide hybrids have attracted extensive interest in solid-state lighting, due to their superior color tunability and low-cost solution processing. However, the relatively low photoluminescence quantum efficiency (PLQE) is a common issue for most bulk lead halide hybrids. Inspired by the intriguing luminescence properties of heterometallic complexes, we rationally developed an unprecedented two-dimensional (2D) Pb-Mn heterometallic halide hybrid, (C₅H₁₄N₂)₂Pb₄MnCl₁₄ (2), through a precisely tailored synthetic approach based on (C₅H₁₄N₂)₂Pb₅Cl₁₄ (1). Intriguingly, 2 features a unique 2D heterometallic halide layer configuration, in which the strong quantum confinement facilitates efficient energy transfer from bound excitons to d-states of Mn²⁺, resulting in highly sensitized Mn²⁺emission. The PLQE of 2 is up to 32%, considerably higher than that of pristine 1 (less than 1%). Moreover, 2 presents significant environmental and thermal stability, benefiting from its cluster feature. To our best knowledge, this is the first example of construction of a Pb-Mn heterometallic halide hybrid with bulk highly efficient red emission. This work provides a way to enhance the PLQE of lead halide hybrids via sensitization in rationally designed heterometallic halide hybrids.

Direct Vapor-Liquid-Solid Synthesis of All-Inorganic Perovskite Nanowires for High-Performance Electronics and Optoelectronics

Controlled synthesis of lead halide perovskite (LHP) nanostructures not only benefits fundamental research but also offers promise for applications. Among many synthesis techniques, although catalytic vapor-liquid-solid (VLS) growth is recognized as an effective route to achieve high-quality nanostructures, until now, there is no detailed report on VLS grown LHP nanomaterials due to the emerging challenges in perovskite synthesis. Here, we develop a direct VLS growth for single-crystalline all-inorganic lead halide perovskite ( i.e., CsPbX₃; X = Cl, Br, or I) nanowires (NWs). These NWs exhibit high-performance photodetection with the responsivity exceeding 4489 A/W and detectivity over 7.9 × 10¹² Jones toward the visible light regime. Field-effect transistors (FET) based on individual CsPbX₃ NWs are also fabricated, where they show the superior hole mobility of up to 3.05 cm²/(V s), higher than other all-inorganic LHP devices. This work provides important guidelines for the further improvement of these perovskite nanostructures for utilizations.

Doping Mn(II) in All-Inorganic Ruddlesden-Popper Phase of Tetragonal Cs2PbCl2I2 Perovskite Nanoplatelets

Doping Mn(II) in inorganic Ruddlesden-Popper phase Cs₂PbCl₂I₂ perovskite nanoplatelets is reported. The host nanostructures were prepared with a calculative protocol taking the exact required composition of Cs(I) and Pb(II) and injecting the preformed mixed oleylammonium chlorides and iodides at optimized reaction temperature. Reactions were optimized with various halides and their mixtures, but the stable phase of the Cs₂PbX₄ system was obtained only for the chloride-iodide mixed-halide system. Introduction of Mn(II) along with Pb(II), resulted in successful light-emitting doped nanocrystals. Measuring the photoluminescence and the decay lifetimes at room and liquid nitrogen temperatures, the variations in the excitonic, self-trapped, and Mn dopant emission properties were compared with those of the chalcogenide and perovskite nanocrystals.