Three-Dimensional Cadmium-Organic Framework with Dual Functions of Oxygen Evolution in Water Splitting and Fenton-like Photocatalytic Removal of Organic Pollutants

Metal-organic frameworks (MOFs) have exhibited appreciable potential as catalytic agents in the field of material science. The research of new MOFs with dual functions in electrocatalysis and photocatalysis under ultraviolet (UV) irradiation is extremely pivotal for renewable energy applications. Hence, we synthesized a series of three-dimensional MOFs, namely, [Cd(bimb)₂(HITA)₂]_n (Cd-MOF 1), {[Cd(bimb)₆](NO₃)₂}_n (Cd-MOF 2), and [Cd(bimb)₄(ONO₂)₂]_n (Cd-MOF 3) (bimb = 1,4-bis(imidazol-1-ylmethyl)benzene; H₂ITA = 5-hydroxyisophthalic acid), with applicability in the oxygen evolution reaction process and Fenton-like photocatalysis. The obtained results show that Cd-MOF 1 exhibited the most remarkable catalytic performance, affording a current density of 10 mA cm^-2 at a very low overpotential of 279 mV and the smallest Tafel slope of 85.13 mV dec^-1. Meanwhile, these MOFs can generate hydroxyl radicals (•OH) under UV light irradiation with the existence of H₂O₂, enabling the rapid degradation of organic pollutants. This study provides a valuable direction for producing multifunctional and environmentally friendly catalysts.

Construction of a direct Z-scheme CeO2/UiO-66-NH2 heterojunction for boosting photocatalytic organic pollutant degradation and H2 evolution performance

In this study, hollow CeO₂ nanospheres were grown on UIO-66-NH₂ nanosheets to form a novel CeO₂/UiO-66-NH₂ (abbreviation, CU_x) Z-scheme heterojunction photocatalyst by calcination and hydrothermal method for hydrogen production and photocatalytic degradation of organic pollutants. Under visible light, the H₂ generation rate of the CU_0.50 composite was 5662.1 μmol g^-1 h^-1, which was 22 and 7 fold than that of pure CeO₂ and pure UiO-66-NH₂, respectively. In addition, compared with CeO₂ and UiO-66-NH₂, the as-prepared CU_x composites exhibited enhanced photo-degradation efficiencies for tetracycline (TC) and 2,4-dichlorophenol (DCP) under simulated solar light irradiation. Among them, the CU_0.50 composite demonstrated the highest photocatalytic performance and reached 91.5% for TC, and 94.3% for DCP. In addition, a logical solid-state Z-type electron transfer mechanism is presented with the results of radical scavenging and ESR experiments to illustrate the intensive decomposed ability of the photocatalytic system. The enhanced photocatalytic performance of CU_x heterostructures can be attributed to the formation of a band-position-matched hollow structure heterojunction between CeO₂ and UIO-66-NH₂, which can effectively inhibit the recombination of carriers and increase the specific surface area as well as the light absorption. Moreover, the oxidation and reduction ability of the charge carriers was also increased. This work resulted in a feasible idea for removing organic pollutants and hydrogen production by traditional inorganic semiconductor/MOF-based heterostructured photocatalysts.

Extending the visible light absorption of NH2-UiO-66 through diazotization reaction for photocatalytic chromium (VI) reduction

The optical properties of NH₂-UiO-66 as a visible light-active metal organic framework was further enhanced through the diazotization reaction with π-conjugated 1-naphthol reagent. Diffuse reflectance UV-Vis spectrum of diazotized MOF, named as Azo-UiO-66, exhibited a significant red shift compared to unfunctionalized NH₂-UiO-66 due to the formation of diazo compound. Also, Tauc calculations indicated considerable decrease in band gap energy from 2.68 to 1.7 eV, resulting in improvement of visible light harvesting. Furthermore, other physicochemical techniques, e.g., X-ray diffraction (XRD), N₂ adsorption-desorption analysis, thermogravimetric analysis (TGA), energ-dispersive X-ray (EDX), and CHN elemental analyses demonstrated the successful MOF diazotization with 1-naphthol and preservation of NH₂-UiO-66 framework upon post-modification process. The reduction of hexavalent chromium, Cr(VI), as a serious contaminant in wastewater to less toxic Cr(III) was performed over prepared photocatalyst, which demonstrated the positive role of ligand functionalization and enhancement of visible light absorption on overall photocatalytic performance of Azo-UiO-66.

Building a cobaloxime-based metal-organic framework for photocatalytic aerobic oxidation of arylboronic acids to phenols

Herein, the design and synthesis of an unprecedented cobaloxime-based zirconium metal-organic framework (Zr-TCPCo) with an she net is reported. This heterogeneous material as a photocatalyst exhibits excellent catalytic activity for aerobic oxidation of arylboronic acids to phenols. Recycling experiments demonstrate the stability and reusability of Zr-TCPCo as a robust catalyst.

Application of covalent organic frameworks and metal–organic frameworks nanomaterials in organic/inorganic pollutants removal from solutions through sorption-catalysis strategies

With the fast development of agriculture, industrialization and urbanization, large amounts of different (in)organic pollutants are inevitably discharged into the ecosystems. The efficient decontamination of the (in)organic contaminants is crucial to human health and ecosystem pollution remediation. Covalent organic frameworks (COFs) and metal–organic frameworks (MOFs) have attracted multidisciplinary research interests because of their outstanding physicochemical properties like high stability, large surface areas, high sorption capacity or catalytic activity. In this review, we summarized the recent works about the elimination/extraction of organic pollutants, heavy metal ions, and radionuclides by MOFs and COFs nanomaterials through the sorption-catalytic degradation for organic chemicals and sorption-catalytic reduction-precipitation-extraction for metals or radionuclides. The interactions between the (in)organic pollutants and COFs/MOFs nanomaterials at the molecular level were discussed from the density functional theory calculation and spectroscopy analysis. The sorption of organic chemicals was mainly dominated by electrostatic attraction, π-π interaction, surface complexation and H-bonding interaction, whereas the sorption of radionuclides and metal ions was mainly attributed to surface complexation, ion exchange, reduction and incorporation reactions. The porous structures, surface functional groups, and active sites were important for the sorption ability and selectivity. The doping or co-doping of metal/nonmetal, or the incorporation with other materials could change the visible light harvest and the generation/separation of electrons/holes (e−/h+) pairs, thereby enhanced the photocatalytic activity. The challenges for the possible application of COFs/MOFs nanomaterials in the elimination of pollutants from water were described in the end.

Charge transfer in metal-organic frameworks

Metal-organic frameworks (MOFs, also known as porous coordination polymers or PCPs) are a novel class of crystalline porous material. The tailorable porous structure, in terms of size, geometry and function, has attracted the attention of researchers across all disciplines of materials science. One of the many exciting aspects of MOFs is that through directional and reversible coordination bonding, organic linkers (chromophores with metal-coordinating functional groups) and metal ions (and clusters) can be spatially organized in a preconceived geometry. The well-defined spatial geometry of the metals and linkers is very advantageous for optoelectronic functions (solar cells, light-emitting diodes, photocatalysts) of the materials. This feature article evaluates the scope of charge transfer (CT) interactions in MOFs, involving the organic linkers and metal ion or cluster components. Irrespective of the type (size, shape, electronic property) of organic chromophores involved, MOFs provide an insightful path to design and make the CT process efficient. The selected examples of MOFs with CT characteristics do not only illustrate the design principles but render a pathway towards understanding the complex photophysical processes and implementing those for future optoelectronic and catalytic applications.

Topological entrapment of macromolecules during the formation of metal-organic framework

Here we present our preliminary results on a novel approach to encapsulate large guest molecules in nanoporous materials, metal-organic frameworks (MOFs), via a newly discovered in situ crystal formation. This method has exciting prospects not only in the design of new organic/inorganic hybrids but also in capturing and separating molecules that are significantly larger than the actual pore size of the host MOF.

BiVO4-Deposited MIL-101-NH2 for Efficient Photocatalytic Elimination of Cr(VI)

In this study, a flower-like BiVO₄/MIL-101-NH₂ composite is synthesized by a facile and surfactant-free process. The -COO^--Bi³⁺ ionic bond construction was conductive to enhance the interface affinity between BiVO₄ and MIL-101-NH₂. Due to the highly efficient light capture and sufficient electron traps induced by oxygen vacancies and the formation of a heterostructure, the improved separation and transportation rates of charge carriers are realized. In addition, the MIL-101-NH₂/BiVO₄ composite is favorable for Cr(VI) photocatalytic removal (91.2%). Moreover, FNBV-3 (Fe/Bi = 0.25) also exhibited an excellent reusability after five cycles.

Recent advances in application of metal-organic frameworks (MOFs) as adsorbent and catalyst in removal of persistent organic pollutants (POPs)

The presence of persistent organic pollutants (POPs) in the aquatic environment is causing widespread concern due to their bioaccumulation, toxicity, and possible environmental risk. These contaminants are produced daily in large quantities and released into water bodies. Traditional wastewater treatment plants are ineffective at degrading these pollutants. As a result, the development of long-term and effective POP removal techniques is critical. In water, adsorption removal and photocatalytic degradation of POPs have been identified as energy and cost-efficient solutions. Both technologies have received a lot of attention for their efforts to treat the world's wastewater. Photocatalytic removal of POPs is a promising, effective, and long-lasting method, while adsorption removal of persistent POPs represents a simple, practical method, particularly in decentralized systems and isolated areas. It is critical to develop new adsorbents/photocatalysts with the desired structure, tunable chemistry, and maximum adsorption sites for highly efficient removal of POPs. As a class of recently created multifunctional porous materials, Metal-organic frameworks (MOFs) offer tremendous prospects in adsorptive removal and photocatalytic degradation of POPs for water remediation. This review defines POPs and discusses current research on adsorptive and photocatalytic POP removal using emerging MOFs for each type of POPs.

Recent Advances in the Development of Novel Iron–Copper Bimetallic Photo Fenton Catalysts

Advanced oxidation processes (AOPs) have been postulated as viable, innovative, and efficient technologies for the removal of pollutants from water bodies. Among AOPs, photo-Fenton processes have been shown to be effective for the degradation of various types of organic compounds in industrial wastewater. Monometallic iron catalysts are limited in practical applications due to their low catalytic activity, poor stability, and recyclability. On the other hand, the development of catalysts based on copper oxides has become a current research topic due to their advantages such as strong light absorption, high mobility of charge carriers, low environmental toxicity, long-term stability, and low production cost. For these reasons, great efforts have been made to improve the practical applications of heterogeneous catalysts, and the bimetallic iron–copper materials have become a focus of research. In this context, this review focuses on the compilation of the most relevant studies on the recent progress in the application of bimetallic iron–copper materials in heterogeneous photo–Fenton-like reactions for the degradation of pollutants in wastewater. Special attention is paid to the removal efficiencies obtained and the reaction mechanisms involved in the photo–Fenton treatments with the different catalysts.

Internalization of the Metal-Organic Framework MIL-101(Cr)-NH2 by a Freshwater Alga and Transfer to Zooplankton

The common metal-organic framework (MOF) MIL-101(Cr)-NH₂ has attracted considerable attention due to its great potential applications in the environmental field. Nevertheless, its behavior and fate in aquatic systems are unknown. This study quantified and visualized the interactions of MIL-101(Cr)-NH₂ with the freshwater phytoplanktonic alga Chlamydomonas reinhardtii and its potential trophic transfer to zooplankton. The unicellular alga absorbed and accumulated the MOF by surface attachment, forming agglomerates and eventually cosettling out from water. Bioimaging revealed that MIL-101(Cr)-NH₂ was internalized by the algal cells and mainly occurred in the pyrenoid. Without algae in a freshwater system, MIL-101(Cr)-NH₂ was ingested by Daphnia magna, showing steadily increasing concentrations approaching 1-9% of dry body weight. Addition of algae substantially suppressed D. magna uptake of MIL-101(Cr)-NH₂ by 63.8-97.9%. Such inhibition could be explained by the competitive uptake of MOF by the algae and the inductive effects of algal food on MOF elimination by D. magna. The MOF (≤1 mg/L) ingested by D. magna was centered in the gut regions, whereas large MOF or algae-MOF aggregates were adsorbed onto the carapace and appendages, including the antennae, at 10 mg/L. Overall, the algae were the major targets for MIL-101(Cr)-NH₂, with nearly all algal cells settling out at 10 mg/L within 24 h. The possibility of trophic transfer of MIL-101(Cr)-NH₂ to D. magna in aquatic systems with algae present was limited due to its low accumulation potential and short retention time in D. magna.

Two Cu(i) coordination polymers based on a new benzimidazolyl-tetrazolyl heterotopic ligand for visible-light-driven photocatalytic dye degradation

Two Cu(i) CPs based on a new heterotopic tripodal ligand were constructed and their visible-light-driven photocatalytic performance were studied.

Immobilization of photocatalytic materials for (waste)water treatment using 3D printing technology - advances and challenges

Photocatalysis has been considered a promising technology for the elimination of a wide range of pollutants in water. Various types of photocatalysts (i.e., homojunction, heterojunction, dual Z-scheme photocatalyst) have been developed in recent years to address the drawbacks of conventional photocatalysts, such as the large energy band gap and rapid recombination rate of photogenerated electrons and holes. However, there are still challenges in the design of photocatalytic reactors that limit their wider application for real (waste)water treatment, such as difficulties in their recovery and reuse from treated (waste)waters. 3D printing technologies have been introduced very recently for the immobilization of materials in novel photocatalytic reactor designs. The present review aims to summarize and discuss the advances and challenges in the application of various 3D printing technologies (i.e., stereolithography, inkjet printing, and direct ink writing) for the fabrication of stable photocatalytic materials for (waste)water treatment purposes. Furthermore, the limitations in the implementation of these technologies to design future generations of photocatalytic reactors have been critically discussed, and recommendations for future studies have been presented.

Constructing tunable coordinatively unsaturated sites in Fe-based metal-organic framework for effective degradation of pharmaceuticals in water: Performance and mechanism

Micropollutants are ubiquitously detected in the aqueous environment, which needs to be removed by novel materials effectively. Herein, we synthesized a photo-Fenton catalyst based on MIL-53 (Fe) to effectively degrade sulfadimidine, one of the micropollutants in water. Abundant Lewis acid active sites (54.26 μmol/g) were successfully constructed within the metal cluster using FeCl₃·6H₂O, 1,4-benzene dicarboxylate, and modulators. This study reports a strategy by effectively constructing tunable Lewis acid active sites within the cavities in MIL-53 (Fe) via a facile solvothermal reaction for sixteen micropollutants removal. The photo-Fenton degradation of sulfamethazine was completely removed (∼99%) within only 1 min with a small amount of hydrogen peroxide added. Both theoretical calculation and the experiment results prove that introducing the unsaturated coordinated/lewis acid sites can remarkably reduce the band gap energy and increase the charge-separation efficiency by changing the electron configuration with more distribution asymmetry of structures. The effective degradation of structurally diverse pharmaceuticals with environmentally relevant concentrations was studied by immobilizing MOF-catalyst into a PVDF support. This work advanced the development of effective approaches for emergency contaminants control.

Metal-Organic Frameworks as Photocatalysts for Solar-Driven Overall Water Splitting

Metal-organic frameworks (MOFs) have been frequently used as photocatalysts for the hydrogen evolution reaction (HER) using sacrificial agents with UV-vis or visible light irradiation. The aim of the present review is to summarize the use of MOFs as solar-driven photocatalysts targeting to overcome the current efficiency limitations in overall water splitting (OWS). Initially, the fundamentals of the photocatalytic OWS under solar irradiation are presented. Then, the different strategies that can be implemented on MOFs to adapt them for solar photocatalysis for OWS are discussed in detail. Later, the most active MOFs reported until now for the solar-driven HER and/or oxygen evolution reaction (OER) are critically commented. These studies are taken as precedents for the discussion of the existing studies on the use of MOFs as photocatalysts for the OWS under visible or sunlight irradiation. The requirements to be met to use MOFs at large scale for the solar-driven OWS are also discussed. The last section of this review provides a summary of the current state of the field and comments on future prospects that could bring MOFs closer to commercial application.

Optimization of Fe/Ni organic frameworks with core-shell structures for efficient visible-light-driven reduction of carbon dioxide to carbon monoxide

To address CO₂ emissions caused by the overuse of fossil fuels, photocatalytic CO₂ reduction from metal-organic frameworks (MOFs) to valuable chemicals is critical for energy conversion and storage. Core-shell MOFs improve interfacial interactions, increasing the number of active sites in the catalyst, thereby improving the photocatalytic reduction. In this work, the catalytic performance of Fe/Ni-MOFs toward photocatalytic CO₂ reduction was improved using a bimetallic strategy. We successfully synthesized a series of Fe/Ni-MOFs with a core-shell structure using a single-step approach combined with hydrothermal synthesis. By altering the synthesis conditions of the bimetallic organic skeleton and contrasting it with a single MOF, we successfully synthesized Fe/Ni-T120 through an efficient photocatalytic reduction of CO₂. The results of photocatalytic CO₂ reduction experiments indicated that upon using [Ru(bpy)₃]Cl₂·6H₂O as a photosensitizer and triethanolamine (TEOA) and acetonitrile (MeCN) as sacrificial agents, the CO evolution rate of Fe/Ni-T120 reached 9.74 mmol g^-1 h^-1 and the CO₂ to CO selectivity reached up to 92.1%. Additionally, Fe/Ni-T120 has a broad response range to visible light, a high photocurrent intensity, good chemical stability, and strong photocatalytic efficiency, even after repeated cycles. This study proposes a straightforward method for producing adaptable and stable MOFs for effective photocatalytic CO₂ reduction that is driven by visible light.

Abdelhamid A, Alzamly A. Visible-Light-Driven Photocatalytic Coupling of Neat Benzylamine over a Bi-Ellagate Metal-Organic Framework

Selective aerobic oxidation of benzylamine to N,N-benzylidenebenzylamine was achieved using a bismuth ellagate (Bi-ellagate) metal-organic framework (MOF) under simulated visible light irradiation. The bismuth ellagate photocatalyst was characterized using several spectroscopic techniques: powder X-ray diffraction (PXRD), diffuse reflectance spectroscopy (DRS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), and nitrogen sorption measurements. Product formation was confirmed using ¹H-NMR, ¹³C-NMR, and FTIR. The photocatalytic performance of Bi-ellagate was studied for the first time, which exhibits a band gap value of 2.62 eV, endowing it with a high photocatalytic activity under visible light irradiation. The reaction product, N,N-benzylidenebenzylamine, was selectively obtained with a high conversion yield of ∼96% under solvent-free conditions compared to other control experiments. The Bi-ellagate photocatalyst was recovered and reused four times without any significant loss in its activity, which provides an eco-friendly, low-cost, recyclable, and efficient photocatalyst for potential photocatalytic applications.

Advances in Hybrid Composites for Photocatalytic Applications: A Review

Heterogeneous photocatalysts have garnered extensive attention as a sustainable way for environmental remediation and energy storage process. Water splitting, solar energy conversion, and pollutant degradation are examples of nowadays applications where semiconductor-based photocatalysts represent a potentially disruptive technology. The exploitation of solar radiation for photocatalysis could generate a strong impact by decreasing the energy demand and simultaneously mitigating the impact of anthropogenic pollutants. However, most of the actual photocatalysts work only on energy radiation in the Near-UV region (<400 nm), and the studies and development of new photocatalysts with high efficiency in the visible range of the spectrum are required. In this regard, hybrid organic/inorganic photocatalysts have emerged as highly potential materials to drastically improve visible photocatalytic efficiency. In this review, we will analyze the state-of-art and the developments of hybrid photocatalysts for energy storage and energy conversion process as well as their application in pollutant degradation and water treatments.

Towards Solving the PFAS Problem: The Potential Role of Metal-Organic Frameworks

Per- and polyfluoroalkyl substances (PFAS) are a group of recalcitrant molecules that have been used since the 1940s in a variety of applications. They are now linked to a host of negative health outcomes and are extremely resistant to degradation under environmental conditions. Currently, membrane technologies or adsorbents are used to remediate contaminated water. These techniques are either inefficient at capturing smaller PFAS molecules, have high energy demands, or result in concentrated waste that must be incinerated at high temperatures. This Review focuses on what role metal-organic frameworks (MOFs) may play in addressing the PFAS problem. Specifically, how the unique properties of MOFs such as their well-defined pore sizes, ultra-high internal surface area, and tunable surface chemistry may be a sustainable solution for PFAS contamination.

Fabrication of 3D self-supported MoS2-Co-P/nickel foam electrode for adsorption-electrochemical removal of Cr(Ⅵ)

Electrochemistry is considered to be one of the most efficient and environment-friendly methods for removing highly toxic Cr (Ⅵ). In this study, a 3D self-supported MoS₂-Co-P/nickel foam (NF) electrode was prepared via a calcination-hydrothermal process to remove the Cr (Ⅵ) in aqueous medium. Scanning electron microscope (SEM) analysis indicated that the pine-needle-like Co₂P nanoneedle and flower-like MoS₂ nanosheets were successfully loaded on the three-dimensional (3D) framework of NF, which provided abundant active sites. The electrode modified by Co, P and MoS₂ exhibited high removal efficiency of Cr (Ⅵ) (96.9%) at pH 3.0, current of 0.128 mA and voltage of 2.5 V. Co, P and MoS₂ have the synergistic promotion on the catalytic performance of electrodes, and the reduction efficiency of Cr (Ⅵ) was greatly improved by 127.5 times relative to pure NF. The enhanced removal of Cr (Ⅵ) was related to the coupling effect of adsorption and electrocatalytic reduction. The mechanism study indicated that electron (e^-) is the active species of Cr (Ⅵ) reduction. The Cr (Ⅵ) removal rate was maintained at 90 ± 1% after five successive cycle experiments, demonstrating good stability and potential industrial applications of MoS₂-Co-P/NF.

Application of Copper(II)-Organic Frameworks Bearing Dilophine Derivatives in Photocatalysis and Guest Separation

The functionalized design of metal-organic frameworks (MOFs) has been rapidly developed in the last 20 years, and its broad applicability has been demonstrated in many fields. MOFs with desired functions can be assembled using predesigned organic linkers with specific metal nodes, which possess the ordered functional sites and open structures. Although a large number of carboxylic acid junctions have been used to construct MOFs, it is still a great challenge to realize their multifunctionality. In particular, there is a relative lack of research on MOFs as direct photocatalysts, which require not only abundant active sites and open structures but also adsorption groups and effective electron-hole separation performance. To this end, MOFs constructed from the carboxylic acid ligands derived from lophine-based derivatives and copper ions were deliberately used as a photocatalyst, and then, their application in dye degradation and aromatic alcohol conversion was investigated. In addition, in combination with the abundant Lewis sites of copper ions and imidazole sites, the material shows not only the adsorption and separation of C₂ series and dyes but also the application of dye degradation and conversion of aromatic alcohols under illumination conditions. The corresponding results fully illustrate that the MOF constructed by using lophine derivatives can be an effective way to prepare photocatalysts. The subsequent research ideas will focus on designing a series of MOFs constructed with multilinked moieties of lophine groups and exploring their application strategies in the field of photocatalysis.

RhB-Embedded Zirconium-Biquinoline-Based MOF Composite for Highly Sensitive Probing Cr(VI) and Photochemical Removal of CrO42-, Cr2O72-, and MO

How to accurately detect and efficiently sweep Cr(VI) from contaminated water has come into focus. Zirconium-based metal-organic frameworks (MOFs) play vital roles in water environmental chemistry due to excellent hydrolysis-resistant stability. However, as photochemical probes and photocatalysts, poor performances in detection sensitivity, selectivity, and photosensitiveness limit sole Zr-MOFs' applications. So, it is urgent to quest valid strategies to break through the dilemmas. Embedding luminous dyes into MOFs has been considered one of the most feasible avenues. Herein, a dual-emissive RhB@Zr-MOF with orange-yellow fluorescence has been assembled by in situ-encapsulating rhodamine B (RhB) into a zirconium-biquinoline-based MOF. Actually, within RhB@Zr-MOF, the aggregation fluorescence quenching (ACQ) effect of RhB molecules was effectively avoided. Notably, RhB@Zr-MOF exhibits a rapid fluorescence quenching response toward Cr(VI) ions with high selectivity, sensitivity, and anti-interference abilities. More interestingly, unlike the most widely reported fluorescence resonance energy transfer (FRET) between MOFs and encapsulated guest modules, photoinduced electron transfer from RhB to Zr-MOF has been confirmed by modeling the ground state and excited states of RhB@Zr-MOF using density functional theory (DFT) and time-dependent DFT (TD-DFT). The effective electron transfer makes RhB@Zr-MOF more sensitive in probing Cr₂O₇^2- and CrO₄^2- ions with ultralow detection limit (DL) values of 6.27 and 5.26 ppb, respectively. Prominently, the detection sensitivity based on DL values has been increased about 6 and 9 times, respectively, compared with pristine Zr-MOF. Moreover, rather negative CB and positive VB potentials make RhB@Zr-MOF have excellent photochemical scavenging ability toward Cr(VI) and MO.

Nanoengineered metal-organic framework for adsorptive and photocatalytic mitigation of pharmaceuticals and pesticide from wastewater

Rapidly expanding water pollution has transformed into significant dangers around the world. In recent years, the pharmaceutical and agriculture field attained enormous progress to meet the necessities of health and life; however, discharge of trace amounts of pharmaceuticals and pesticides into water significantly have a negative influence on human health and the environment. Contamination with these pollutants also constitutes a great threat to the aquatic ecosystem. To deal with the harmful impacts of such pollutants, their expulsion has attracted researchers' interest a lot, and it became essential to figure out techniques suitable for the removal of these pollutants. Thus, many researchers have devoted their efforts to improving the existing technology or providing an alternative strategy to solve this environmental problem. One of the attractive materials for this purpose is metal-organic frameworks (MOFs) due to their superior high surface area, high porosity, and the tunable features of their structures and function. Among various techniques of wastewater treatment, such as biological treatment, advanced oxidation process and membrane technologies, etc., metal-organic frameworks (MOFs) materials are tailorable porous architectures and are viably used as adsorbents or photocatalysts for wastewater treatment due to their porosity, tunable internal structure, and large surface area. MOFs are synthesized by various methods such as solvo/hydrothermal, sonochemical, microwave and mechanochemical methods. Most common method used for the synthesis of MOFs is solvothermal/hydrothermal methods. Herein, this review aims at providing a comprehensive overview of the latest advances in MOFs and their derivatives, focusing on the following aspects: synthesis and applications. This review comprehensively highlights the application of MOFs and nano-MOFs to remove pharmaceuticals and pesticides from wastewater. For the past years, transition metal-based MOFs have been concentrated as photocatalyst/adsorbents in treating contaminated water. However, work on main group metal-based MOFs is not so abundant. Hence, the foremost objective of this review is to present the latest material and references concerning main group element-based MOFs and nanoscale materials derived from them towards wastewater treatment. It summarizes the possible research challenges and directions for MOFs and their derivatives as catalysts applied to wastewater treatment in the future. With the context of recent pioneering studies on main group elements-based MOFs and their derivatives; we hope to stimulate some possibilities for further development, challenges and future perspectives in this field have been highlighted.

The state of the art review on photocatalytic Cr(VI) reduction over MOFs-based photocatalysts: From batch experiment to continuous operation

This state of the art review presented the photocatalytic reduction from highly toxic Cr(VI) to lowly toxic Cr(III) with metal-organic frameworks (MOFs) and their composites. The construction of composites facilitated the transportation of the photo-induced charges to enhance the Cr(VI) reduction, in which the corresponding mechanisms were clarified by both experimental tests and DFT calculations. The immobilized MOFs onto some substrates accomplished continuous operations toward Cr(VI) reduction even under real solar light. As well, the environmental applications of the Cr(VI) reduction were analyzed, in which the influence factors toward the Cr(VI) reduction were clarified. This review reported that a big breakthrough was achieved from the batch experiment to the continuous operation for Cr(VI) reduction, in which MOFs demonstrated a bright prospective in the field of photocatalytic Cr(VI) reduction.

Rapid surface degradation of co-axially arranged polypropylene globules by nanoporous carbonized TiO2 assisted with UV-C

The degradation of plastics, especially polypropylene (PP), is difficult since it is the most hydrophobic polymer. Photocatalytic degradation of PP films has been reported to be one of the most efficient degradation techniques. However, it is still insignificant to employ it in field applications. In this study, TiO₂ nanoparticles supported on amorphous carbon with nanoporosity (TiO₂@NC) are used as a photocatalyst to degrade macro-sized co-axially oriented PP globules under the influence of UV-C irradiation. Surface characterization such as SEM, ATR-FTIR, and XPS of the PP globules was performed. The SEM images distinctly showed the surface degradation phenomenon. Interestingly, the ATR-FTIR spectra demonstrated a significant rise in the band intensity in the -OH radical region and fairly in the CO region as well, with the increase in the photocatalytic time. Surprisingly, in the XPS spectra, the intensity of C-1s spectra kept on falling, and the intensity of O-1s spectra kept on rising with the increase in the photocatalytic time. The higher surface area due to nanoporosity of TiO₂@NC enhanced the photocatalytic degradation of PP globules than previously reported studies. TiO₂@NC seems to be a potential catalyst for the degradation of different types of polymers.

Catalytic activity and mechanistic investigation of 1D 2-Picolinic acid based Cu(II) coordination polymer in the selective construction of 1,4-disubstituted triazoles

The catalytic activity of 1D 2-Picolinic acid based Cu (II) coordination polymer (CP1) in click reaction was evaluated to generate 1,4-disubstituted 1,2,3-triazoles selectively. The CP1 catalyst loading of 2 mol% was applied successfully in the reaction for primary azides with diverse functionalities of terminal alkynes in green solvent (EG/H2O). Moreover, the one-pot, multicomponent click reaction involving benzyl bromide, sodium azide, and phenylacetylene was also catalyzed by CP1. The findings show that 1D 2-Picolinic acid based Cu (II) coordination polymer catalytic systems are highly efficient for green click triazoles synthesis. DFT calculation supported the plausible mechanism involved in the CP1 catalyzed click reaction.

Recent Progress of Metal-Organic Frameworks and Metal-Organic Frameworks-Based Heterostructures as Photocatalysts

In the field of photocatalysis, metal-organic frameworks (MOFs) have drawn a lot of attention. MOFs have a number of advantages over conventional semiconductors, including high specific surface area, large number of active sites, and an easily tunable porous structure. In this perspective review, different synthesis methods used to prepare MOFs and MOFs-based heterostructures have been discussed. Apart from this, the application of MOFs and MOFs-based heterostructures as photocatalysts for photocatalytic degradation of different types of pollutants have been compiled. This paper also highlights the different strategies that have been developed to modify and regulate pristine MOFs for improved photocatalytic performance. The MOFs modifications may result in better visible light absorption, effective photo-generated charge carriers (e^-/h⁺), separation and transfer as well as improved recyclability. Despite that, there are still many obstacles and challenges that need to be addressed. In order to meet the requirements of using MOFs and MOFs-based heterostructures in photocatalysis for low-cost practical applications, future development and prospects have also been discussed.

Atom Substitution Defects of Hexagonal Boron Phosphide Suppress Charge Recombination

Point defects, during e-h recombination, are a key factor in impacting optoelectronic device performance. Using nonadiabatic molecular dynamics (NAMD), here we investigate the nonradiative recombination of pristine, missing atom defects, including phosphorus vacancies (V_P) and phosphorus and boron vacancies (V_BP), and atom substitution defects, containing boron on the phosphorus site (B_P) and phosphorus on the boron site (P_B) of 2D monolayer hexagonal boron phosphide (h-BP). Carrier dynamics in the pristine h-BP and the defect engineered systems reveal that atom substitution defects B_P and P_B can suppress e-h nonradiative recombination. This is caused by the introduction of several low-frequency phonons in defect states. Electron-phonon coupling between the electronic state and these low-frequency phonons shortens the decoherence time and the nonadiabatic coupling. Also, the atom substitution systems with one defect state introduce fewer carrier recombination channels. Such a mechanism can be extended to other 2D materials with the same structure as h-BP.

Metal-Organic Frameworks for Wastewater Decontamination: Discovering Intellectual Structure and Research Trends

Due to their simple synthesis method and excellent properties, such as superior adsorption and regeneration capabilities, with a large surface area and tunable pores, metal-organic frameworks (MOFs) have emerged as a suitable option for wastewater treatment. Although an exponential growth in MOF literature has been observed in recent years, conducting a quantitative literature analysis of MOF application in wastewater treatment is a novelty. To fill this gap, a total of 1187 relevant publications were extracted from the Web of Science, published during the last 50 years, and analyzed using bibliometric and content analysis techniques. A bibliometric analysis was conducted to reveal growing publication trends, leading journals, prolific countries, and organizations; whereas, a content analysis was used to highlight key research themes and hot topics in this field. The analyses revealed that there is a strong international collaboration among authors, countries, and organizations. Chemical Engineering Journal, Journal of Hazardous Materials, and Journal of Environmental Chemical Engineering are the most prolific journals in this field. Furthermore, the use of MOFs for removing antibiotics from wastewater was identified as a recent hot topic. In addition, performance enhancements of MOFs, in terms of a higher adsorption capacity and water stability, were identified as topics of great interest. To cater to these issues, the application of graphene, graphene oxides, nanoparticles, and quantum dots was also observed in the research fronts in this field.

Selective and Multicyclic CO2 Adsorption with Visible Light-Driven Photodegradation of Organic Dyes in a Robust Metal-Organic Framework Embracing Heteroatom-Affixed Pores

Pore environment modulation with polarizing groups is one of the essential prerequisites for selective carbon dioxide (CO₂) adsorption in metal-organic frameworks (MOFs), wherein judicious installation of the photocatalytic feature can promise visible light-triggered degradation of toxic organic dye molecules. However, astute amalgamation of both these attributes over a single MOF is rather rare, yet much anticipated in view of sustainable applications. Pore engineering is effectively harnessed in a Zn(II)-based three-dimensional (3D) MOF, CSMCRI-16 (CSMCRI = Central Salt and Marine Chemicals Research Institute), through mixed-ligand assembly of a N-rich linker (L), 4,4'-oxybis(benzoic acid) (H₂oba) ligand, and [Zn₂(CO₂)₄N₂] paddle-wheel secondary building units (SBUs). The noninterpenetrated structure contains unbound nitrogen and accessible oxygen atom-decorated porous channels and exhibits admirable stability in diverse organic solvents, open air, and at elevated temperatures. The heteroatom-decorated porous channels facilitated excellent CO₂ uptake in the activated MOF (16a) with high selectivity over N₂ (CO₂/N₂: 155.3) at 273 K. The framework further exhibits reasonable CO₂ affinity and multicyclic CO₂ sorption recurrence without a significant loss in the uptake capacity. Benefitting from the presence of the [Zn₂(CO₂)₄N₂] cluster in conjugation with π-conjugated organic ligands, the extended 3D network revealed an optical band gap energy of 2.55 eV, which makes the MOF an efficient photocatalyst toward the degradation of the cationic dyes crystal violet (CV) and methylene blue (MB) in the presence of a simple 40 W visible light lamp without any assistance of external oxidants. The catalyst exhibits multicyclic performance and short reaction time in addition to the fact that catalytic efficiencies (CV: 97.2%, MB: 97.8%) are comparable to those of contemporary materials.