Heterodinuclear zinc and magnesium catalysts for epoxide/CO2 ring opening copolymerizations

Tuning metal-metal interactions for cooperative small molecule activation

Cluster complexes have attracted interest for decades due to their promise of drawing analogies to metallic surfaces and metalloenzyme active sites, but only recently have chemists started to develop ligand scaffolds that are specifically designed to support multinuclear transition metal cores. Such ligands not only hold multiple metal centers in close proximity but also allow for fine-tuning of their electronic structures and surrounding steric environments. This Feature Article highlights ligand designs that allow for cooperative small molecule activation at cluster complexes, with a particular focus on complexes that contain metal-metal bonds. Two useful ligand-design elements have emerged from this work: a degree of geometric flexibility, which allows for novel small molecule activation modes, and the use of redox-active ligands to provide electronic flexibility to the cluster core. The authors have incorporated these factors into a unique class of dinucleating macrocycles (nPDI2). Redox-active fragments in nPDI2 mimic the weak-overlap covalent bonding that is characteristic of M-M interactions, and aliphatic linkers in the ligand backbone provide geometric flexibility, allowing for interconversion between a range of geometries as the dinuclear core responds to the requirements of various small molecule substrates. The union of these design elements appears to be a powerful combination for analogizing critical aspects of heterogeneous and metalloenzyme catalysts.

Pinwheel-Shaped Tetranuclear Organoboron Catalysts for Perfectly Alternating Copolymerization of CO2 and Epichlorohydrin

The copolymerization of carbon dioxide (CO₂) and epoxides to produce aliphatic polycarbonates is a burgeoning technology for the large-scale utilization of CO₂ and degradable polymeric materials. Even with the wealth of advancements achieved over the past 50 years on this green technology, many challenges remain, including the use of metal-containing catalysts for polymerization, the removal of the chromatic metal residue after polymerization, and the limited practicable epoxides, especially for those containing electron-withdrawing groups. Herein, we provide kinds of pinwheel-shaped tetranuclear organoboron catalysts for epichlorohydrin/CO₂ copolymerization with >99% polymer selectivity and quantitative CO₂ uptake (>99% carbonate linkages) under mild conditions (25-40 °C, 25 bar of CO₂). The produced poly(chloropropylene carbonate) has the highest molecular weight of 36.5 kg/mol and glass transition temperature of 45.4 °C reported to date. The energy difference (ΔE_a = 60.7 kJ/mol) between the cyclic carbonate and polycarbonate sheds light on the robust performance of our metal-free catalyst. Control experiments and density functional theory (DFT) calculations revealed a cyclically sequential copolymerization mechanism. The metal-free feature, high catalytic performance under mild conditions, and no trouble with chromaticity for the produced polymers imply that our catalysts are practical candidates to advance the CO₂-based polycarbonates.

Reflection on the Matyjaszewski Lab Webinar Series and the Rise of Webinars in Polymer Chemistry

Webinar series are helping our community of polymer scientists to stay engaged and connected, despite the cancellation of in-person meetings and the periodic closure of laboratories to contain the spread of the coronavirus pandemic. The sustainable and inclusive character of these virtual events make them valuable learning and networking opportunities. As organizers of the Matyjaszewski Lab Webinar Series, we share herein our experience, highlighting the benefits of virtual meetings and providing a short guide for webinar organizers. Researchers, particularly young scientists, are encouraged to organize such virtual events to broaden their skills and strengthen their professional network.

Alternating Copolymerization of Carbon Dioxide with Epoxides Using Highly Active Dinuclear Nickel Complexes: Catalysis and Kinetics

A novel series of well-defined dicarboxylate dinuclear nickel complexes containing benzotriazole based 1,3-diamine-bisphenolate (1,3-DiBTP) ligands were readily synthesized through a one-pot procedure, which were highly active single-component catalysts for copolymerization of CO₂ and epoxides. X-ray structural determination of dinickel complexes 1-11 indicates that the DiBTP ligand acted as a N,O,N,N,O,N-hexadentate framework to chelate two nickel atoms, and two carboxylates are nonequivalently coordinated. The best benzoate-bonded dinickel catalyst 6 displayed the effective activity for both high-pressure and 1 atm CO₂-copolymerization of cyclohexene oxide (CHO) in a controllable manner. Noteworthily, a high turnover frequency up to 9600 h^-1 could be reached at 140 °C and a CO₂ pressure of 20.7 bar utilizing a low catalyst loading of 0.01 mol %, and the same copolymerization conditions were capable of producing narrowly dispersed poly(cyclohexene carbonate) (PCHC) having >99% polycarbonate selectivity. In addition to CO₂/CHO copolymerization, 4-vinyl-1,2-cyclohexene oxide or cyclopentene oxide was also applied to efficiently copolymerize CO₂ under conditions of 80 °C and 20.7 bar initial CO₂ pressure. Kinetic studies of CO₂/CHO copolymerization catalyzed by 6 were investigated. Such polymerization revealed first-order dependence for both catalyst 6 and CHO concentrations, and the activation energy for PCHC generation by 6 is 57.69 kJ mol^-1. A possible polymerization mechanism for CO₂-copolymerization of CHO was proposed based on kinetics and structural studies of the obtained polycarbonates.

Heterodinuclear catalysts Zn(ii)/M and Mg(ii)/M, where M = Na(i), Ca(ii) or Cd(ii), for phthalic anhydride/cyclohexene oxide ring opening copolymerisation

A series of heterodinuclear catalysts, coordinated by a Schiff base ligand, for ring opening copolymerisation of phthalic anhydride/cyclohexene oxide, highlight the best metal combinations for fast and selective catalysis.

Co(III)/Alkali-Metal(I) Heterodinuclear Catalysts for the Ring-Opening Copolymerization of CO2 and Propylene Oxide

The ring-opening copolymerization of carbon dioxide and propene oxide is a useful means to valorize waste into commercially attractive poly(propylene carbonate) (PPC) polyols. The reaction is limited by low catalytic activities, poor tolerance to a large excess of chain transfer agent, and tendency to form byproducts. Here, a series of new catalysts are reported that comprise heterodinuclear Co(III)/M(I) macrocyclic complexes (where M(I) = Group 1 metal). These catalysts show highly efficient production of PPC polyols, outstanding yields (turnover numbers), quantitative carbon dioxide uptake (>99%), and high selectivity for polyol formation (>95%). The most active, a Co(III)/K(I) complex, shows a turnover frequency of 800 h-1 at low catalyst loading (0.025 mol %, 70 °C, 30 bar CO2). The copolymerizations are well controlled and produce hydroxyl telechelic PPC with predictable molar masses and narrow dispersity (Đ < 1.15). The polymerization kinetics show a second order rate law, first order in both propylene oxide and catalyst concentrations, and zeroth order in CO2 pressure. An Eyring analysis, examining the effect of temperature on the propagation rate coefficient (kp), reveals the transition state barrier for polycarbonate formation: ΔG‡ = +92.6 ± 2.5 kJ mol-1. The Co(III)/K(I) catalyst is also highly active and selective in copolymerizations of other epoxides with carbon dioxide.

Main group bimetallic partnerships for cooperative catalysis

Over the past decade s-block metal catalysis has undergone a transformation from being an esoteric curiosity to a well-established and consolidated field towards sustainable synthesis. Earth-abundant metals such as Ca, Mg, and Al have shown eye-opening catalytic performances in key catalytic processes such as hydrosilylation, hydroamination or alkene polymerization. In parallel to these studies, s-block mixed-metal reagents have also been attracting widespread interest from scientists. These bimetallic reagents effect many cornerstone organic transformations, often providing enhanced reactivities and better chemo- and regioselectivities than conventional monometallic reagents. Despite a significant number of synthetic advances to date, most efforts have focused primarily on stoichiometric transformations. Merging these two exciting areas of research, this Perspective Article provides an overview on the emerging concept of s/p-block cooperative catalysis. Showcasing recent contributions from several research groups across the world, the untapped potential that these systems can offer in catalytic transformations is discussed with special emphasis placed on how synergistic effects can operate and the special roles played by each metal in these transformations. Advancing the understanding of the ground rules of s-block cooperative catalysis, the application of these bimetalic systems in a critical selection of catalytic transformations encompassing hydroamination, cyclisation, hydroboration to C-C bond forming processes are presented as well as their uses in important polymerization reactions.

Efficient Production of Poly(Cyclohexene Carbonate) via ROCOP of Cyclohexene Oxide and CO2 Mediated by NNO-Scorpionate Zinc Complexes

New mono- and dinuclear chiral alkoxide/thioalkoxide NNO-scorpinate zinc complexes were easily synthesized in very high yields, and characterized by spectroscopic methods. X-ray diffraction analysis unambiguously confirmed the different nuclearity of the new complexes as well as the variety of coordination modes of the scorpionate ligands. Scorpionate zinc complexes 2, 4 and 6 were assessed as catalysts for polycarbonate production from epoxide and carbon dioxide with no need for a co-catalyst or activator under mild conditions. Interestingly, at 70 °C, 10 bar of CO₂ pressure and 1 mol % of loading, the dinuclear thioaryloxide [Zn(bpzaepe)₂{Zn(SAr)₂}] (4) behaves as an efficient and selective one-component initiator for the synthesis of poly(cyclohexene carbonate) via ring-opening copolymerization of cyclohexene oxide (CHO) and CO₂, affording polycarbonate materials with narrow dispersity values.

Recent Advances in the Chemistry of Metal Carbamates

Following a related review dating back to 2003, the present review discusses in detail the various synthetic, structural and reactivity aspects of metal species containing one or more carbamato ligands, representing a large family of compounds across all the periodic table. A preliminary overview is provided on the reactivity of carbon dioxide with amines, and emphasis is given to recent findings concerning applications in various fields.

Metal Complexes Bearing Sulfur-Containing Ligands as Catalysts in the Reaction of CO2 with Epoxides

Coupling of CO2 with epoxides is a green emerging alternative for the synthesis of cyclic organic carbonates (COC) and aliphatic polycarbonates (APC). The scope of this work is to provide a comprehensive overview of metal complexes having sulfur-containing ligands as homogeneous catalytic systems able to efficiently promote this transformation with a concise discussion of the most significant results. The crucial role of sulfur as the hemilabile ligand and its influence on the catalytic activity are highlighted as well.

Bimetallic Zinc Catalysts for Ring-Opening Copolymerization Processes

Novel bimetallic zinc acetate complexes supported by heteroscorpionate ligands have been developed for the ring-opening copolymerization of cyclohexene oxide and CO₂ and the terpolymerization of cyclohexene oxide, phthalic anhydride, and CO₂. Heteroscorpionate ligands precursors L₁-L₃ were reacted with two equivalents of zinc acetate to afford the dinuclear zinc complexes [{Zn(κ³-bpzappe)}(μ-O₂CCH₃)₃-{Zn(HO₂CCH₃)}] (1), [{Zn(κ³-bpzbdmape)}(μ-O₂CCH₃)₃-{Zn(HO₂CCH₃)}] (2), and [{Zn(κ³-bpzbdeape)}(μ-O₂CCH₃)₃{Zn(HO₂CCH₃)}] (3) in excellent yields. The molecular structure of these compounds was determined spectroscopically and confirmed by X-ray diffraction analysis. Zinc acetate complexes 1-3 were screened as catalysts for the copolymerization of cyclohexene oxide and CO₂ to produce poly(cyclohexene)carbonate, and complex 3 was found to be the most active catalyst for this process in the absence of a cocatalyst. Furthermore, the terpolymerization of cyclohexene oxide, phthalic anhydride, and CO₂ was studied using the combination of complex 3 and 4-dimethylaminopyridine as catalyst system yielding the corresponding polyester-polycarbonate materials.

Aluminum porphyrins with quaternary ammonium halides as catalysts for copolymerization of cyclohexene oxide and CO2: metal-ligand cooperative catalysis

Bifunctional Al porphyrins worked as excellent catalysts for the copolymerization of cyclohexene oxide (CHO) and CO₂.

Bifunctional Al^III porphyrins with quaternary ammonium halides, 2-Cl and 2-Br, worked as excellent catalysts for the copolymerization of cyclohexene oxide (CHO) and CO₂ at 120 °C. Turnover frequency (TOF) and turnover number (TON) reached 10 000 h^–1 and 55 000, respectively, and poly(cyclohexene carbonate) (PCHC) with molecular weight of up to 281 000 was obtained with a catalyst loading of 0.001 mol%. In contrast, bifunctional Mg^II and Zn^II counterparts, 3-Cl and 4-Cl, as well as a binary catalyst system, 1-Cl with bis(triphenylphosphine)iminium chloride (PPNCl), showed poor catalytic performances. Kinetic studies revealed that the reaction rate was first-order in [CHO] and [2-Br] and zero-order in [CO₂], and the activation parameters were determined: ΔH^‡ = 12.4 kcal mol^–1, ΔS^‡ = –26.1 cal mol^–1 K^–1, and ΔG^‡ = 21.6 kcal mol^–1 at 80 °C. Comparative DFT calculations on two model catalysts, Al^III complex 2′ and Mg^II complex 3′, allowed us to extract key factors in the catalytic behavior of the bifunctional Al^III catalyst. The high polymerization activity and carbonate-linkage selectivity originate from the cooperative actions of the metal center and the quaternary ammonium cation, both of which facilitate the epoxide-ring opening by the carbonate anion to form the carbonate linkage in the key transition state such as TS3b (ΔH^‡ = 13.3 kcal mol^–1, ΔS^‡ = –3.1 cal mol^–1 K^–1, and ΔG^‡ = 14.4 kcal mol^–1 at 80 °C).

Triblock polyester thermoplastic elastomers with semi-aromatic polymer end blocks by ring-opening copolymerization

Thermoplastic elastomers benefit from high elasticity and straightforward (re)processability; they are widely used across a multitude of sectors. Currently, the majority derive from oil, do not degrade or undergo chemical recycling. Here a new series of ABA triblock polyesters are synthesized and show high-performances as degradable thermoplastic elastomers; their composition is poly(cyclohexene-alt-phthalate)-b-poly(ε-decalactone)-b-poly(cyclohexene-alt-phthalate) {PE-PDL-PE}. The synthesis is accomplished using a zinc(ii)/magnesium(ii) catalyst, in a one-pot procedure where ε-decalactone ring-opening polymerization yielding dihydroxyl telechelic poly(ε-decalatone) (PDL, soft-block) occurs first and, then, addition of phthalic anhydride/cyclohexene oxide ring-opening copolymerization delivers semi-aromatic polyester (PE, hard-block) end-blocks. The block compositions are straightforward to control, from the initial monomer stoichiometry, and conversions are high (85-98%). Two series of polyesters are prepared: (1) TBPE-1 to TBPE-5 feature an equivalent hard-block volume fraction (f hard = 0.4) and variable molar masses 40-100 kg mol-1; (2) TBPE-5 to TBPE-9 feature equivalent molar masses (∼100 kg mol-1) and variable hard-block volume fractions (0.12 < f hard < 0.4). Polymers are characterized using spectroscopies, size-exclusion chromatography (SEC), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). They are amorphous, with two glass transition temperatures (∼-51 °C for PDL; +138 °C for PE), and block phase separation is confirmed using small angle X-ray scattering (SAXS). Tensile mechanical performances reveal thermoplastic elastomers (f hard < 0.4 and N > 1300) with linear stress-strain relationships, high ultimate tensile strengths (σ b = 1-5 MPa), very high elongations at break (ε b = 1000-1900%) and excellent elastic recoveries (98%). There is a wide operating temperature range (-51 to +138 °C), an operable processing temperature range (+100 to +200 °C) and excellent thermal stability (T d,5% ∼ 300 °C). The polymers are stable in aqueous environments, at room temperature, but are hydrolyzed upon gentle heating (60 °C) and treatment with an organic acid (para-toluene sulfonic acid) or a common lipase (Novozyme® 51032). The new block polyesters show significant potential as sustainable thermoplastic elastomers with better properties than well-known styrenic block copolymers or polylactide-derived elastomers. The straightforward synthesis allows for other commercially available and/or bio-derived lactones, epoxides and anhydrides to be developed in the future.

A Novel [OSSO]-Type Chromium(III) Complex as a Versatile Catalyst for Copolymerization of Carbon Dioxide with Epoxides

A new chromium(III) complex, bearing a bis-thioether-diphenolate [OSSO]-type ligand, was found to be an efficient catalyst in the copolymerization of CO₂ and epoxides to achieve poly(propylene carbonate), poly(cyclohexene carbonate), poly(hexene carbonate) and poly(styrene carbonate), as well as poly(propylene carbonate)(cyclohexene carbonate) and poly(propylene carbonate)(hexene carbonate) terpolymers.

Dinucleating Amino-Phenolate Platform for Zinc Catalysts: Impact on Lactide Polymerization

We report imine- and amine-based dinucleating ligands bearing a bisphenol backbone and explore their coordination chemistry with zinc to form zinc alkyl, alkoxide, acetate, and amide complexes. Full characterization of the complexes shows that this ligand framework can support dinuclear and trinuclear complexes. We explore the reactivity of the zinc alkyl and alkoxide complexes as catalysts for the ring opening polymerization of lactide and compared this reactivity to analogous mononuclear complexes. We show that 1) The amine-based complexes are more reactive than the imine-based analogues; 2) The trinuclear zinc alkyl species show unusual control and reproducibility for lactide polymerization; and 3) The extent of bimetallic cooperation is hampered by the ability of the ligand framework to form trinuclear clusters.

A regioselectively 1,1',3,3'-tetrazincated ferrocene complex displaying core and peripheral reactivity

Regioselective 1,1',3,3'-tetrazincation [C-H to C-Zn(tBu)] of ferrocene has been achieved by reaction of a fourfold excess of di-t-butylzinc (tBu2Zn) with sodium 2,2,6,6-tetramethylpiperidide (NaTMP) in hexane solution manifested in the trimetallic iron-sodium-zinc complex [Na4(TMP)4Zn4(tBu)4{(C5H3)2Fe}], 1. X-ray crystallographic studies supported by DFT modelling reveal the structure to be an open inverse crown in which two [Na(TMP)Zn(tBu)Na(TMP)Zn(tBu)]2+ cationic units surround a {(C5H3)2Fe}4- tetraanion. Detailed C6D6 NMR studies have assigned the plethora of 1H and 13C chemical shifts of this complex. It exists in a major form in which capping and bridging TMP groups interchange, as well as a minor form that appears to be an intermediate in this complicated exchange phenomenon. Investigation of 1 has uncovered two distinct reactivities. Two of its peripheral t-butyl carbanions formally deprotonate toluene at the lateral methyl group to generate benzyl ligands that replace these carbanions in [Na4(TMP)4Zn4(tBu)2(CH2Ph)2{(C5H3)2Fe}], 2, which retains its tetrazincated ferrocenyl core. Benzyl-Na π-arene interactions are a notable feature of 2. In contrast, reaction with pyridine affords the crystalline product {[Na·4py][Zn(py*)2(tBu)·py]}∞, 3, where py is neutral pyridine (C5H5N) and py* is the anion (4-C5H4N), a rare example of pyridine deprotonated/metallated at the 4-position. This ferrocene-free complex appears to be a product of core reactivity in that the core-positioned ferrocenyl anions of 1, in company with TMP anions, have formally deprotonated the heterocycle.

Switchable Catalysis Improves the Properties of CO2-Derived Polymers: Poly(cyclohexene carbonate-b-ε-decalactone-b-cyclohexene carbonate) Adhesives, Elastomers, and Toughened Plastics

Carbon dioxide/epoxide copolymerization is an efficient way to add value to waste CO2 and to reduce pollution in polymer manufacturing. Using this process to make low molar mass polycarbonate polyols is a commercially relevant route to new thermosets and polyurethanes. In contrast, high molar mass polycarbonates, produced from CO2, generally under-deliver in terms of properties, and one of the most widely investigated, poly(cyclohexene carbonate), is limited by its low elongation at break and high brittleness. Here, a new catalytic polymerization process is reported that selectively and efficiently yields degradable ABA-block polymers, incorporating 6-23 wt % CO2. The polymers are synthesized using a new, highly active organometallic heterodinuclear Zn(II)/Mg(II) catalyst applied in a one-pot procedure together with biobased ε-decalactone, cyclohexene oxide, and carbon dioxide to make a series of poly(cyclohexene carbonate-b-decalactone-b-cyclohexene carbonate) [PCHC-PDL-PCHC]. The process is highly selective (CO2 selectivity >99% of theoretical value), allows for high monomer conversions (>90%), and yields polymers with predictable compositions, molar mass (from 38-71 kg mol-1), and forms dihydroxyl telechelic chains. These new materials improve upon the properties of poly(cyclohexene carbonate) and, specifically, they show good thermal stability (Td,5 ∼ 280 °C), high toughness (112 MJ m-3), and very high elongation at break (>900%). Materials properties are improved by precisely controlling both the quantity and location of carbon dioxide in the polymer chain. Preliminary studies show that polymers are stable in aqueous environments at room temperature over months, but they are rapidly degraded upon gentle heating in an acidic environment (60 °C, toluene, p-toluene sulfonic acid). The process is likely generally applicable to many other lactones, lactides, anhydrides, epoxides, and heterocumulenes and sets the scene for a host of new applications for CO2-derived polymers.

Lanthanide clusters as highly efficient catalysts regarding carbon dioxide activation

Lanthanide clusters display a wide substrate scope and high catalytic activity for the insertion of CO₂ into epoxides to form cyclic carbonates.

Highly active bimetallic nickel catalysts for alternating copolymerization of carbon dioxide with epoxides

Catalyst 1 was reported for the first time to be effective for nickel-catalyzed CO₂/CHO copolymerization at 1 atm CO₂ pressure.

Macrocyclic multinuclear metal complexes acting as catalysts for organic synthesis

Recent progress in homogeneous catalysis with macrocyclic multinuclear metal complexes (categories A–C) is overviewed.

Heterodinuclear complexes featuring Zn(ii) and M = Al(iii), Ga(iii) or In(iii) for cyclohexene oxide and CO2 copolymerisation

The ring opening copolymerisation of CO₂ and epoxides is a useful means to valorise waste emissions and to reduce pollution in polymer manufacturing. Heterodinuclear catalysts, particularly those of Zn(ii)/Mg(ii), have shown better performances than homodinuclear analogues in this reaction. As part of on-going efforts to better understand the catalytic synergy, this work describes a series of heterodinuclear complexes, combining Zn(ii) with a metal from Group 13 (M = Al(iii), Ga(iii) or In(iii)). The complexes are synthesised from a symmetrical macrocyclic ligand in high yields via sequential metalation steps and are the thermodynamic reaction products. The Zn(ii)/Group 13 complexes are effective homogeneous catalysts for the ring opening copolymerisation (ROCOP) of cyclohexene oxide at 1 bar pressure of carbon dioxide, but all show inferior performances compared to the di-zinc analogue. The CO₂ uptake into the polymer increases in the order Al(iii) < Ga(iii) < In(iii) which is attributed to lower Lewis acidity heavier Group 13 homologues showing a reduced tendency to form ether linkages. Concurrently, polycarbonate activity increases down the Group 13 series consistent with weaker metal-oxygen bonds which show enhanced lability to insertion reactions.

Turning on ROP activity in a bimetallic Co/Zn complex supported by a [2+2] Schiff-base macrocycle

Homo-dinuclear Co and Zn complexes derived from the macrocycle LH2, {[2-(OH)-5-(R)-C6H2-1,3-(CH)2][CH2CH2(2-C6H4N)2]}2 (R = Me, tBu), revealed near inactivity for the ring opening polymerization (ROP) of the cyclic esters δ-valerolactone (δ-VL) and ε-caprolactone (ε-CL). By contrast, the hetero-bimetallic complexes [LCo(NCMe)(μ-Br)ZnBr]·nMeCN (n = 3 or 3.25) were found to be efficient catalysts for the ROP of ε-CL and δ-VL.

Synthesis and characterization of di-nuclear bis(benzotriazole iminophenolate) cobalt complexes: catalysis for the copolymerization of carbon dioxide with epoxides

A family of di-nuclear bis(benzotriazole iminophenolate) (BiIBTP) cobalt complexes containing diverse ancillary carboxylate derivatives have been synthesized and structurally characterized. The one-pot synthesis of the BiIBTP ligand precursor with cobalt perchlorate salt (2.0 equiv.) and carboxylic acid derivatives (2.0 or 5.0 equiv.) in the presence of triethylamine (5.0 equiv.) under refluxing methanolic solution generated bimetallic di-carboxylate Co(ii)/Co(ii) complexes [(^C83CBiIBTP)Co₂(O₂CR)₂] (R = C₆H₅ (1), C₆F₅ (2), 4-CF₃-C₆H₄ (3), 4-OMe-C₆H₄ (4), CF₃ (5)) in ≧65% yields. Interestingly, the Co(ii)/Co(iii) mixed-valence complex 6 resulted from the treatment of 1 with silver perchlorate (1.0 equiv.) as the oxidizing agent under an O₂-atmosphere in 50% yield. The crystal structure of 6 reveals an ionic and di-nuclear benzoate species composed of a cationic moiety formulated as [(^C83CBiIBTP)Co₂(O₂CC₆H₅)₂]⁺ and a counterbalanced perchlorate anion, and both metal atoms are attributed to hexa-coordinated cobalt ions with varied coordination environments. Catalysis results of CO₂/epoxide copolymerization indicated that complex 1 was more efficient than 2-6 where compound 6 was shown to be the least active. Co complex 1 incorporating benzoate coligands was demonstrated to effectively catalyze the CO₂-copolymerization of cyclohexene oxide (CHO), 4-vinyl-1,2-cyclohexene oxide or cyclopentene oxide, producing the associated CO₂-based polycarbonates with >99% carbonate repeated units under optimal conditions. Not only the controllable character of complex 1 for CO₂/CHO copolymerization is enabled, but also 1 has been shown to catalyze such a copolymerization in the "immortal" manner. Using the same di-cobalt catalyst in combination with excess ratios of neopentyl glycol (up to 150 equiv.) as the chain transfer agent could give low molecular weight poly(cyclohexene carbonate) polyols with monomodal molecular weight distributions. This work offers the facilely prepared di-nuclear cobalt complexes as catalysts for the efficient catalysis of CO₂-copolymerization.

Efficient CO2 fixation into cyclic carbonates catalyzed by NNO-scorpionate zinc complexes

Chiral bifunctional and bicomponent NNO-scorpionate zinc-based catalysts have been developed for the fixation of CO₂ into cyclic carbonates with broad substrate scope and functional group tolerance under mild and solvent-free conditions.

Waste not, want not: CO2 (re)cycling into block polymers

A new way to combine two different polymerisation reactions, using a single catalyst, results in efficient block polymer synthesis. The selective polymerisation of mixtures of l-lactide-O-carboxyanhydride and cyclohexene oxide, using a di-zinc catalyst in a one-pot procedure, allows the preparation of poly(l-lactide-b-cyclohexene carbonate). The catalysis near quantitatively recycles the carbon dioxide released during polyester formation into the subsequent polycarbonate block, with an atom economy of up to of 91%.