Designing flexible, smart and self-sustainable supercapacitors for portable/wearable electronics: from conductive polymers

In Situ Generation of Vertically Crossed P-Cu3Se2 Ultrathin Nanosheets Derived from Cu2S Nanorod Arrays for High-Performance Supercapacitors

Transition-metal selenides (TMSs) have great potential in the synthesis of supercapacitor electrode materials due to their rich content and high specific capacity. However, the aggregation phenomenon of TMS materials in the process of charging and discharging will cause capacity attenuation, which seriously affects the service life and practical applications. Therefore, it is of great practical significance to design simple and efficient synthesis strategies to overcome these shortcomings. Hence, P-doped Cu₃Se₂ nanosheets are loaded on vertically aligned Cu₂S nanorod arrays to synthesize CF/Cu₂S@Cu₃Se₂/P nanocomposites with a unique core-shell heterostructure. Notably, the Cu₂S precursors can be rapidly converted into Cu₃Se₂ nanorod arrays in situ in just 30 min at room temperature. The unique core-shell heterostructure effectively avoids the aggregation phenomenon, and the doped P elements further enhance the electrochemical properties of the electrode materials. Therefore, the as-prepared CF/Cu₂S@Cu₃Se₂/P electrode exhibits a high areal capacitance of 5054 mF cm^-2 (1099 C g^-1) at 3 mA cm^-2 and still retains 90.2% capacitance after 10 000 galvanostatic charge-discharge (GCD) cycles. The asymmetric supercapacitor (ASC) device assembled from synthetic CF/Cu₂S@Cu₃Se₂/P and activated carbon (AC) possesses an energy density of 41.1 Wh kg^-1 at a power density of 480.4 W kg^-1. This work shows that the designed CF/Cu₂S@Cu₃Se₂/P electrode has broad application prospects in the field of electrochemical energy storage.

Al Foil-Supported Carbon Nanosheets as Self-Supporting Electrodes for High Areal Capacitance Supercapacitors

Self-supporting electrode materials with the advantages of a simple operation process and the avoidance of the use any binders are promising candidates for supercapacitors. In this work, carbon-based self-supporting electrode materials with nanosheets grown on Al foil were prepared by combining hydrothermal reaction and the one-step chemical vapor deposition method. The effect of the concentration of the reaction solution on the structures as well as the electrochemical performance of the prepared samples were studied. With the increase in concentration, the nanosheets of the samples became dense and compact. The CNS-120 obtained from a 120 mmol zinc nitrate aqueous solution exhibited excellent electrochemical performance. The CNS-120 displayed the highest areal capacitance of 6.82 mF cm-2 at the current density of 0.01 mA cm-2. Moreover, the CNS-120 exhibited outstanding rate performance with an areal capacitance of 3.07 mF cm-2 at 2 mA cm-2 and good cyclic stability with a capacitance retention of 96.35% after 5000 cycles. Besides, the CNS-120 possessed an energy density of 5.9 μWh cm-2 at a power density of 25 μW cm-2 and still achieved 0.3 μWh cm-2 at 4204 μW cm-2. This work provides simple methods to prepared carbon-based self-supporting materials with low-cost Al foil and demonstrates their potential for realistic application of supercapacitors.

Recent Progress of Energy-Storage-Device-Integrated Sensing Systems

With the rapid prosperity of the Internet of things, intelligent human-machine interaction and health monitoring are becoming the focus of attention. Wireless sensing systems, especially self-powered sensing systems that can work continuously and sustainably for a long time without an external power supply have been successfully explored and developed. Yet, the system integrated by energy-harvester needs to be exposed to a specific energy source to drive the work, which provides limited application scenarios, low stability, and poor continuity. Integrating the energy storage unit and sensing unit into a single system may provide efficient ways to solve these above problems, promoting potential applications in portable and wearable electronics. In this review, we focus on recent advances in energy-storage-device-integrated sensing systems for wearable electronics, including tactile sensors, temperature sensors, chemical and biological sensors, and multifunctional sensing systems, because of their universal utilization in the next generation of smart personal electronics. Finally, the future perspectives of energy-storage-device-integrated sensing systems are discussed.

Intrinsically Conducting Polymer Composites as Active Masses in Supercapacitors

Intrinsically conducting polymers ICPs can be combined with further electrochemically active materials into composites for use as active masses in supercapacitor electrodes. Typical examples are inspected with particular attention to the various roles played by the constituents of the composites and to conceivable synergistic effects. Stability of composite electrode materials, as an essential property for practical application, is addressed, taking into account the observed causes and effects of materials degradation.

Heterojunctions on Ta2O5@MWCNT for Ultrasensitive Ethanol Sensing at Room Temperature

Heterojunctions of Ta₂O₅ and multiwalled carbon nanotubes (MWCNTs) have been successfully synthesized by a facile and cost-effective hydrothermal method, with a super thin and uniform Ta₂O₅ shell wrapped around the MWCNT. The combination of Ta₂O₅ and MWCNTs at the interface not only modifies the morphology but also forms the p-n heterojunction, which contributes to the reconstruction of band structure, as well as the low resistance of matrix and highly chemisorbed oxygen content. The Ta₂O₅@MWCNT p-n heterojunction exhibits ultrasensitive performance to ethanol at room temperature, with a response of 3.15 toward 0.8 ppm ethanol and a detection limit of 0.173 ppm. The sensor has a high reproducibility at various concentrations of ethanol, superior selectivity to other gases, and long-term stability. The strategy of hybriding metal oxide semiconductors with MWCNT promises to provide a feasible and further developable pathway for high-performance room-temperature gas sensors.

Self-Healing Polymers for Electronics and Energy Devices

Polymers are extensively exploited as active materials in a variety of electronics and energy devices because of their tailorable electrical properties, mechanical flexibility, facile processability, and they are lightweight. The polymer devices integrated with self-healing ability offer enhanced reliability, durability, and sustainability. In this Review, we provide an update on the major advancements in the applications of self-healing polymers in the devices, including energy devices, electronic components, optoelectronics, and dielectrics. The differences in fundamental mechanisms and healing strategies between mechanical fracture and electrical breakdown of polymers are underlined. The key concepts of self-healing polymer devices for repairing mechanical integrity and restoring their functions and device performance in response to mechanical and electrical damage are outlined. The advantages and limitations of the current approaches to self-healing polymer devices are systematically summarized. Challenges and future research opportunities are highlighted.

Novel Hybrid Composites Based on Polymers of Diphenyl-Amine-2-Carboxylic Acid and Highly Porous Activated IR-Pyrolyzed Polyacrylonitrile

Hybrid composites based on electroactive polymers of diphenylamine-2-carboxylic acid (PDPAC) and highly porous carbon with a hierarchical pore structure were prepared for the first time. Activated IR-pyrolyzed polyacrylonitrile (IR-PAN-a), characterized by a highly developed surface, was chosen as a highly porous N-doped carbon component of the hybrid materials. IR-PAN-a was prepared using pyrolysis of polyacrylonitrile (PAN) in the presence of potassium hydroxide under IR radiation. Composite materials were obtained using oxidative polymerization of diphenylamine-2-carboxylic acid (DPAC) in the presence of IR-PAN-a both in an acidic and an alkaline medium. The composite materials were IR-heated to reduce the oxygen content and enhance their physical and chemical properties. The chemical structure, morphology, and electrical and thermal properties of the developed IR-PAN-a/PDPAC composites were investigated. The IR-PAN-a/PDPAC composites are thermally stable and electrically conductive. During the synthesis of the composites in an acidic medium, doping of the polymer component occurs, which makes the main contribution to the composite conductivity (1.3 × 10^-5 S/cm). A sharp drop in the electrical conductivity of the IR-PAN-a/PDPAC_ac-IR composites to 3.4 × 10^-10 S/cm is associated with the removal of the dopant during IR heating. The IR-PAN-a/PDPAC_alk composites prepared before and after IR heating show a gradual increase in electrical conductivity by five orders of magnitude to 1.6 × 10^-5 S/cm at 25-10⁶ Hz. IR heating of the obtained materials leads to a significant increase in their thermal properties. The IR-heated composites lose half of their initial weight in an inert atmosphere at temperatures above 1000 °C, whereas for IR-PAN-a/PDPAC, the temperature range is 840-849 °C.

Biomass Nanoarchitectonics for Supercapacitor Applications

Nanoarchitectonics integrates nanotechnology with numerous scientific disciplines to create innovative and novel functional materials from nano-units (atoms, molecules, and nanomaterials). The objective of nanoarchitectonics concept is to develop functional materials and systems with rationally architected functional units. This paper explores the progress and potential of this field using biomass nanoarchitectonics for supercapacitor applications as examples of energetic materials and devices. Strategic design of nanoporous carbons that exhibit ultra-high surface area and hierarchically pore architectures comprising micro- and mesopore structure and controlled pore size distributions are of great significance in energy-related applications, including in high-performance supercapacitors, lithium-ion batteries, and fuel cells. Agricultural wastes or natural biomass are lignocellulosic materials and are excellent carbon sources for the preparation of hierarchically porous carbons with an ultra-high surface area that are attractive materials in high-performance supercapacitor applications due to high electrical and ion conduction, extreme porosity, and exceptional chemical and thermal stability. In this review, we will focus on the latest advancements in the fabrication of hierarchical porous carbon materials from different biomass by chemical activation method. Particularly, the importance of biomass-derived ultra-high surface area porous carbons, hierarchical architectures with interconnected pores in high-energy storage, and high-performance supercapacitors applications will be discussed. Finally, the current challenges and outlook for the further improvement of carbon materials derived from biomass or agricultural wastes in the advancements of supercapacitor devices will be discussed.

Studies on Oxygen Permeation Resistance of SiCN Thin Film and RRAM Applications

In this study, a silicon carbon nitride (SiCN) thin film was grown with a thickness of 5~70 nm by the plasma-enhanced chemical vapor deposition (PECVD) method, and the oxygen permeation characteristics were analyzed according to the partial pressure ratio (PPR) of tetramethylsilane (4MS) to the total gas amount during the film deposition. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), and X-ray reflectivity (XRR) were used to investigate the composition and bonding structures of the SiCN film. An atomic force microscope (AFM) was used to examine the surface morphology of the SiCN films to see the porosity. The analysis indicated that Si-N bonds were dominant in the SiCN films, and a higher carbon concentration made the film more porous. To evaluate the oxygen permeation, a highly accelerated temperature and humidity stress test (HAST) evaluation was performed. The films grown at a high 4MS PPR were more susceptible to oxygen penetration, which changed Si-N bonds to Si-N-O bonds during the HAST. These results indicate that increasing the 4MS PPR made the SiCN film more porous and containable for oxygen. As an application, for the first time, SiCN dielectric film is suggested to be applied to resistive random access memory (RRAM) as an oxygen reservoir to store oxygen and prevent a reaction between metal electrodes and oxygen. The endurance characteristics of RRAM are found to be enhanced by applying the SiCN.

Light-Controlled Triple-Shape-Memory, High-Permittivity Dynamic Elastomer for Wearable Multifunctional Information Encoding Devices

Self-powered information encoding devices (IEDs) have drawn considerable interest owing to their capability to process information without batteries. Next-generation IEDs should be reprogrammable, self-healing, and wearable to satisfy the emerging requirements for multifunctional IEDs; however, such devices have not been demonstrated. Herein, an integrated triboelectric nanogenerator-based IED with the aforementioned features was developed based on the designed light-responsive high-permittivity poly(sebacoyl diglyceride-co-4,4'-azodibenzoyl diglyceride) elastomer (PSeDAE) with a triple-shape-memory effect. The electrical memory feature was achieved through a microscale shape-memory property, enabling spatiotemporal information reprogramming for the IED. Macroscale shape-memory behavior afforded the IED shape-reprogramming ability, yielding wearable and detachable features. The dynamic transesterifications and light-heating groups in the PSeDAE afforded a remotely controlled rearrangement of its cross-linking network, producing the self-healing IED.

Optoelectronic Artificial Synaptic Device Based on Amorphous InAlZnO Films for Learning Simulations

Neuromorphic computing, which mimics brain function, can address the shortcomings of the "von Neumann" system and is one of the critical components of next-generation computing. The use of light to stimulate artificial synapses has the advantages of low power consumption, low latency, and high stability. We demonstrate amorphous InAlZnO-based light-stimulated artificial synaptic devices with a thin-film transistor structure. The devices exhibit fundamental synaptic properties, including excitatory postsynaptic current, paired-pulse facilitation (PPF), and short-term plasticity to long-term plasticity conversion under light stimulation. The PPF index stimulated by 375 nm light is 155.9% when the time interval is 0.1 s. The energy consumption of each synaptic event is 2.3 pJ, much lower than that of ordinary MOS devices and other optical-controlled synaptic devices. The relaxation time constant reaches 277 s after only 10 light spikes, which shows the great synaptic plasticity of the device. In addition, we simulated the learning-forgetting-relearning-forgetting behavior and learning efficiency of human beings under different moods by changing the gate voltage. This work is expected to promote the development of high-performance optoelectronic synaptic devices for neuromorphic computing.

Polymerization-Driven Self-Wrinkling on a Frozen Hydrogel Surface toward Ultra-Stretchable Polypyrrole-Based Supercapacitors

The construction of ultra-stretchable and smart supercapacitors with a large deformation-tolerance range and highly efficient self-healability is fully desired for next-generation wearable electronics. Herein, a sandwich-structured self-wrinkling hydrogel film (SSHF) is fabricated by freezing-constrained polymerization-driven self-wrinkling. Polypyrrole layers are first polymerized on a frozen pre-stretching hydrogel surface and subsequently self-wrinkled upon releasing the pre-strain. The SSHF with two polypyrrole electrode layers sandwiched with a hydrogel electrolytic layer is finally achieved by cutting four edges, and the all-in-one integrated structure creatively avoids the delamination between the electrodes and the electrolyte. The as-obtained SSHF can be directly used as an integrated all-in-one supercapacitor demonstrating high specific capacitance (79.5 F g^-1 at 0.5 A g^-1), large stretchability (>500%), and reliable room temperature self-healability. The freezing-constrained polymerization-driven self-wrinkling strategy might provide a unique self-wrinkling procedure to fabricate self-healable conducting polymer-based hydrogels for ultra-stretchable smart supercapacitors.

Multistimuli-responsive materials based on a zinc(II) complex with high-contrast and multicolor switching

The development of stimulus-responsive luminescent materials, especially those based on a single compound exhibiting multicolor and high-contrast (Δλ_em ≥ 100 nm) chromic properties, is a critical challenge. In this work, we synthesized and characterized a zinc(II) complex (1). As expected, 1 displays aggregation-induced emission enhancement (AIEE) in THF/H₂O mixtures, and remarkable multicolor switching under external stimuli in the solid state. Complex 1 shows reversible mechanochromic luminescence behavior with a large wavelength shift (Δλ_em = 100 nm) during the grinding-fuming cycles, due to the phase transformation between the crystalline and amorphous states. More impressively, 1 exhibits obvious acidochromic properties (Δλ_em = 130 nm) which originate from the adsorption of vapor and a gas-solid reaction on the crystal surface. Furthermore, 1 exhibits electrochemical oxidation behavior accompanied by quenching of yellow-green emission due to the overlap of an emission band and an absorption band. The above-mentioned color changes under ambient light can also be observed by the naked eye during the mechanical, acid-base vapor and electrical stimulation. Based on the high-contrast and multicolor switching, complex 1 was successfully developed into test papers and films in the field of rapid detection of mechanical stimuli and HCl/NH₃ vapors.

Ultrasimple air-annealed pure graphene oxide film for high-performance supercapacitors

Realizing both high gravimetric and volumetric specific capacitances (noted as C_W and C_V, respectively) is an essential prerequisite for the next-generation, high performance supercapacitors. However, the need of electronic/ionic transport for electrochemical reactions causes a "trade-off" between compacted density and capacitance of electrode, thereby impairing gravimetric or volumetric specific capacitances. Herein, we report a high-performance, film-based supercapacitor via a thermal reduction of graphene oxide (GO) in air. The reduced, layer-structured graphene film ensures high electrode density and high electron conductivity, while the hierarchical channels generated from reduction-induced gas releasing process offer sufficient ion transport pathways. Note that the resultant graphene film is employed directly as electrodes without using any additives (binders and conductive agents). As expected, the as-prepared electrodes perform particularly well in both C_W (420F g^-1) and C_V (360F cm^-3) at a current density of 0.5 A g^-1. Even at an ultrahigh current density of 50 A g^-1, C_W and C_V maintain in 220F g^-1 and 189F cm^-3, respectively. Furthermore, the corresponding symmetric two-electrode supercapacitor achieves both high gravimetric energy density of 54 W h kg^-1 and high gravimetric power density of 1080 W kg^-1, corresponding to volumetric energy density of 46 W h L^-1 and volumetric power density of 917 W L^-1.

Synthetic Route to Conjugated Donor–Acceptor Polymer Brushes via Alternating Copolymerization of Bifunctional Monomers

Alternating donor–acceptor conjugated polymers, widely investigated due to their applications in organic photovoltaics, are obtained mainly by cross-coupling reactions. Such a synthetic route exhibits limited efficiency and requires using, for example, toxic palladium catalysts. Furthermore, the coating process demands solubility of the macromolecules, provided by the introduction of alkyl side chains, which have an impact on the properties of the final material. Here, we present the synthetic route to ladder-like donor–acceptor polymer brushes using alternating copolymerization of modified styrene and maleic anhydride monomers, ensuring proper arrangement of the pendant donor and acceptor groups along the polymer chains grafted from a surface. As a proof of concept, macromolecules with pendant thiophene and benzothiadiazole groups were grafted by means of RAFT and metal-free ATRP polymerizations. Densely packed brushes with a thickness up to 200 nm were obtained in a single polymerization process, without the necessity of using metal-based catalysts or bulky substituents of the monomers. Oxidative polymerization using FeCl₃ was then applied to form the conjugated chains in a double-stranded (ladder-like) architecture.

Myriophyllum spicatum Leaves: Aerophily for Gas Collection and Transportation in Water

The unique living environment of aquatic plants makes them produce many fantastic properties different from land ones. For instance, the leaves of Myriophyllum spicatum show excellent hydrophobicity and aerophily characteristics. In this paper, the abundant morphological structure, composition, and aerophily properties of Myriophyllum spicatum leaves are revealed. The contact angle of the leaf surface can reach 122° in air, exhibiting wonderful gas collection ability under water. The results showed that the aerophily of the leaves is attributed to the multistage micro-nanostructure and waxy layer on the surface. The gas transportation toward the tips of leaves is based on the void gradient formed by the nanoscale morphology at different growth stages and the buoyancy as well. These features provide bionic experience for gas collection, bubble transportation, and liquid resistance reduction in water environments.

Synergistic Effect of Hexagonal Boron Nitride-Coated Separators and Multi-Walled Carbon Nanotube Anodes for Thermally Stable Lithium-Ion Batteries

In this work, we report the development of separators coated with hexagonal boron nitride (hBN) to improve the thermal stability of Li-ion batteries (LIBs). Aiming to achieve a synergistic effect of separators and anodes on thermal stability and electrochemical performance, multiwalled carbon nanotubes (MWCNTs) were prepared via plasma-enhanced chemical vapor deposition (PECVD) method and used as potential anode materials for LIBs. The grown MWCNTs were well characterized by using various techniques which confirmed the formation of MWCNTs. The prepared MWCNTs showed a crystalline structure and smooth surface with a diameter of ~9–12 nm and a length of ~10 μm, respectively. Raman spectra showed the characteristic peaks of MWCNTs and BN, and the sharpness of the peaks showed the highly crystalline nature of the grown MWCNTs. The electrochemical studies were performed on the fabricated coin cell with a MWCNT anode using a pristine andBN-coated separators. The results show that the cell with the BN-coated separator in a conventional organic carbonate-based electrolyte and MWCNTs as the anode resulted in a discharge capacity (at 65 °C) of ~567 mAhg−1 at a current density of 100 mAg−1 for the first cycle, and delivered a capacity of ~471 mAhg−1 for 200 cycles. The columbic efficiency was found to be higher (~84%), which showed excellent reversible charge–discharge behavior as compared with the pristine separator (69%) after 200 cycles. The improved thermal performance of the LIBs with the BN-coated separator and MWCNT anode might be due to the greater homogeneous thermal distribution resulting from the BN coating, and the additional electron pathway provided by the MWCNTs. Thus, the fabricated cell showed promising results in achieving the stable operation of the LIBs even at higher temperatures, which will open a pathway to solve the practical concerns over the use of LIBs at higher temperatures without compromising the performance.