Minichromosome maintenance helicase activity is controlled by N- and C-terminal motifs and requires the ATPase domain helix-2 insert

A superfamily 3 DNA helicase encoded by plasmid pSSVi from the hyperthermophilic archaeon Sulfolobus solfataricus unwinds DNA as a higher-order oligomer and interacts with host primase

Replication proteins encoded by nonconjugative plasmids from the hyperthermophilic archaea of the order Sulfolobales show great diversity in amino acid sequence. We have biochemically characterized ORF735, a replication protein from pSSVi, an integrative nonconjugative plasmid from Sulfolobus solfataricus P2. We show that ORF735 is a DNA helicase of superfamily 3. It unwound double-stranded DNA (dsDNA) in a 3'-to-5' direction in the presence of ATP over a wide range of temperatures, from 37 degrees C to 75 degrees C, and possessed DNA-stimulated ATPase activity. ORF735 existed in solution as a salt-stable dimer and was capable of assembling into a salt-sensitive oligomer that was significantly larger than a hexamer in the presence of a divalent cation (Mg(2+)) and an adenine nucleotide (ATP, dATP, or ADP) or its analog (ATPgammaS or AMPPNP). Both N-terminal and C-terminal portions of ORF735 (87 and 160 amino acid residues, respectively, in size) were required for protein dimerization but dispensable for the formation of the higher-order oligomer. The protein unwound DNA only as a large oligomer. Yeast two-hybrid and coimmunoprecipitation assays revealed that ORF735 interacted with the noncatalytic subunit of host primase. These findings provide clues to the functional role of ORF735 in pSSVi DNA replication.

Structural biology of MCM helicases

The eukaryotic MCM2-7 complex is recruited onto origins of replication during the G1 phase of the cell cycle and acts as the main helicase at the replication fork during the S phase. Over the last few years a number of structural reports on MCM proteins using both electron microscopy and protein crystallography have been published. The crystal structures of two (almost) full-length archaeal homologs provide the first atomic pictures of a MCM helicase. However one of the structures is at low resolution and the other is of an inactive MCM. Moreover, both proteins are monomeric in the crystal, whereas the activity of the complex is critically dependent on oligomerization. Lower resolution structures derived from electron microscopy studies are therefore crucial to complement the crystallographic analysis and to assemble the multimeric complex that is active in the cell. A critical analysis of all the structural results elucidates the potential conformational changes and dynamic behavior of MCM helicase to provide a first insight into the gamut of molecular configurations adopted during the processes of DNA melting and unwinding.

The glutamate switch is present in all seven clades of AAA+ protein

Recent work has identified a "glutamate switch" in six of the seven clades of AAA+ ATPases. The glutamate switch acts to transduce information regarding substrate binding to the ATPase active site. We provide biochemical evidence that a highly conserved threonine residue acts as a glutamate switch in the replicative helicase, MCM, and, thus, reveal that the glutamate switch is a feature common to all seven AAA+ clades.

Mutations in subdomain B of the minichromosome maintenance (MCM) helicase affect DNA binding and modulate conformational transitions

Minichromosome maintenance (MCM) proteins are believed to provide the replicative helicase activity in eukaryotes and archaea. The single MCM orthologue from Methanothermobacter thermautotrophicus (MthMCM) has been extensively characterized as a model of the eukaryotic heterohexameric MCM complex. MthMCM forms high molecular weight complexes in solution consistent with a dodecamer. Visualization of this complex by electron microscopy suggests that single and double heptameric or hexameric rings can form. We have mutated two arginine residues (Arg-137, Arg-160) in the N-terminal subdomain B of MthMCM based on their apparent potential to form inter-ring hydrogen bonds. Both the single R137A and the double R137A,R160A mutants were characterized by a combination of biophysical, biochemical, and electron microscopy techniques. Biophysical analysis coupled with electron microscopy studies shows that the R137A mutant forms a double heptameric ring, whereas the R137A,R160A protein assembles as a single heptamer. They both show a defect in DNA binding and a concomitant conformational change in subdomain A, with the double mutant displaying significant defects in helicase activity as well. We propose a model in which MCM loading and the subsequent activation of the helicase activity involve a conformational transition that is connected to a DNA binding event.

Methanococcus maripaludis: an archaeon with multiple functional MCM proteins?

There are a large number of proteins involved in the control of eukaryotic DNA replication, which act together to ensure DNA is replicated only once every cell cycle. Key proteins involved in the initiation and elongation phases of DNA replication include the MCM (minchromosome maintenance) proteins, MCM2-MCM7, a family of six related proteins believed to act as the replicative helicase. Genome sequencing has revealed that the archaea possess a simplified set of eukaryotic replication homologues. The complexity of the DNA replication machinery in eukaryotes has led to a number of archaeal species being adapted as model organisms for the study of the DNA replication process. Most archaea sequenced to date possess a single MCM homologue that forms a hexameric complex. Recombinant MCMs from several archaea have been used in the biochemical characterization of the protein, revealing that the MCM complex has ATPase, DNA-binding and -unwinding activities. Unusually, the genome of the methanogenic archaeon Methanococcus maripaludis contains four MCM homologues, all of which contain the conserved motifs required for function. The availability of a wide range of genetic tools for the manipulation of M. maripaludis and the relative ease of growth of this organism in the laboratory makes it a good potential model for studying the role of multiple MCMs in DNA replication.

How is the archaeal MCM helicase assembled at the origin? Possible mechanisms

In order for any organism to replicate its DNA, a helicase must unwind the duplex DNA in front of the replication fork. In archaea, the replicative helicase is the MCM (minichromosome maintenance) helicase. Although much is known about the biochemical properties of the MCM helicase, the mechanism of assembly at the origin of replication is unknown. In the present paper, several possible mechanisms for the loading process are described.

Cyclin E-dependent localization of MCM5 regulates centrosome duplication

Centrosomes are the primary microtubule-organizing centers in animal cells and are required for bipolar spindle assembly during mitosis. Amplification of centrosome number is commonly observed in human cancer cells and might contribute to genomic instability. Cyclin E-Cdk2 has been implicated in regulating centrosome duplication both in Xenopus embryos and extracts and in mammalian cells. Localization of cyclin E on centrosomes is mediated by a 20-amino acid domain termed the centrosomal localization sequence (CLS). In this paper, cyclin E is shown to directly interact with and colocalize on centrosomes with the DNA replication factor MCM5 in a CLS-dependent but Cdk2-independent manner. The domain in MCM5 that is responsible for interaction with cyclin E is distinct from any previously described for MCM5 function and is highly conserved in MCM5 proteins from yeast to mammals. Expression of MCM5 or its cyclin E-interacting domain, but not MCM2, significantly inhibits over-duplication of centrosomes in CHO cells arrested in S-phase. These results indicate that proteins involved in DNA replication might also regulate centrosome duplication.

Crystal structure of a near-full-length archaeal MCM: functional insights for an AAA+ hexameric helicase

The minichromosome maintenance protein (MCM) complex is an essential replicative helicase for DNA replication in Archaea and Eukaryotes. Whereas the eukaryotic complex consists of 6 homologous proteins (MCM2-7), the archaeon Sulfolobus solfataricus has only 1 MCM protein (ssoMCM), 6 subunits of which form a homohexamer. Here, we report a 4.35-A crystal structure of the near-full-length ssoMCM. The structure shows an elongated fold, with 5 subdomains that are organized into 2 large N- and C-terminal domains. A near-full-length ssoMCM hexamer generated based on the 6-fold symmetry of the N-terminal Methanothermobacter thermautotrophicus (mtMCM) hexamer shows intersubunit distances suitable for bonding contacts, including the interface around the ATP pocket. Four unusual beta-hairpins of each subunit are located inside the central channel or around the side channels in the hexamer. Additionally, the hexamer fits well into the double-hexamer EM map of mtMCM. Our mutational analysis of residues at the intersubunit interfaces and around the side channels demonstrates their critical roles for hexamerization and helicase function. These structural and biochemical results provide a basis for future study of the helicase mechanisms of the archaeal and eukaryotic MCM complexes in DNA replication.

Mcm4 C-terminal domain of MCM helicase prevents excessive formation of single-stranded DNA at stalled replication forks

The minichromosome maintenance (MCM) helicase, composed of subunits Mcm2-7, is essential for the initiation and elongation phases of DNA replication. Even when DNA synthesis is blocked, MCM continues DNA unwinding to some extent for activation of the replication checkpoint and then stops. However, the mechanism of regulation of MCM-helicase activity remains unknown. Here, we show that truncation of the Mcm4 C-terminal domain (CTD) in fission yeast results in hypersensitivity to replication block caused by dNTP depletion. The truncation mcm4-c84 does not affect the activation of the replication checkpoint pathway but delays its attenuation during recovery from replication block. Two dimensional gel electrophoresis showed that mcm4-c84 delays the disappearance of replication intermediates, indicating that the Mcm4 CTD is required for efficient recovery of stalled replication forks. Remarkably, chromatin immunoprecipitation revealed that mcm4-c84 brings about an increase rather than a decrease in the association of the single-stranded DNA-binding protein RPA to stalled forks, and MCM and the accessory complex GINS are unaffected. These results suggest that the Mcm4 CTD is required to suspend MCM-helicase activity after the formation of single-stranded DNA sufficient for checkpoint activation.

Cryo-electron microscopy reveals a novel DNA-binding site on the MCM helicase

The eukaryotic MCM2-7 complex is recruited at origins of replication during the G1 phase and acts as the main helicase at the replication fork during the S phase of the cell cycle. To characterize the interplay between the MCM helicase and DNA prior to the melting of the double helix, we determined the structure of an archaeal MCM orthologue bound to a 5.6-kb double-stranded DNA segment, using cryo-electron microscopy. DNA wraps around the N-terminal face of a single hexameric ring. This interaction requires a conformational change within the outer belt of the MCM N-terminal domain, exposing a previously unrecognized helix-turn-helix DNA-binding motif. Our findings provide novel insights into the role of the MCM complex during the initiation step of DNA replication.

Structural analysis of the Sulfolobus solfataricus MCM protein N-terminal domain

The Mini-Chromosome Maintenance (MCM) proteins are candidates of replicative DNA helicase in eukarya and archaea. Here we report a 2.8 Å crystal structure of the N-terminal domain (residues 1–268) of the Sulfolobus solfataricus MCM (Sso MCM) protein. The structure reveals single-hexameric ring-like architecture, at variance from the protein of Methanothermobacter thermoautotrophicus (Mth). Moreover, the central channel in Sso MCM seems significantly narrower than the Mth counterpart, which appears to more favorably accommodate single-stranded DNA than double-stranded DNA, as supported by DNA-binding assays. Structural analysis also highlights the essential role played by the zinc-binding domain in the interaction with nucleic acids and allows us to speculate that the Sso MCM N-ter domain may function as a molecular clamp to grasp the single-stranded DNA passing through the central channel. On this basis possible DNA unwinding mechanisms are discussed.

On helicases and other motor proteins

Helicases are molecular machines that utilize energy derived from ATP hydrolysis to move along nucleic acids and to separate base-paired nucleotides. The movement of the helicase can also be described as a stationary helicase that pumps nucleic acid. Recent structural data for the hexameric E1 helicase of papillomavirus in complex with single-stranded DNA and MgADP has provided a detailed atomic and mechanistic picture of its ATP-driven DNA translocation. The structural and mechanistic features of this helicase are compared with the hexameric helicase prototypes T7gp4 and SV40 T-antigen. The ATP-binding site architectures of these proteins are structurally similar to the sites of other prototypical ATP-driven motors such as F1-ATPase, suggesting related roles for the individual site residues in the ATPase activity.

A novel mirror-symmetry analysis approach for the study of macromolecular assemblies imaged by electron microscopy

Multivariate statistical symmetry analysis is widely employed in single-particle electron-microscopy studies for the detection of symmetry components within a set of noisy two-dimensional images. So far, this technique has been used to retrieve information from the analysis of end-on view oriented particles only. Here, we propose a method to detect symmetry components from side- and tilted-view oriented particles. This method is validated using a number of in silico generated as well as real datasets, can be used to analyze stoichiometrically heterogeneous datasets, and is useful for separating particle datasets with respect to their symmetry components. Additionally, translational components in lock-washer ring configurations can be detected. Most relevantly, this method represents a powerful tool for the characterisation of distinct symmetry components within multi-layered protein assemblies, and any putative symmetry mismatch between layers. Such configurations have often been postulated, though rarely observed directly, and are thought to have a crucial role in conferring dynamicity to molecular machineries like nucleic acid packaging motors, ClpAP/ClpXP proteases, flagellar motors and the F1/F0 ATPase.

The MCM complex: (just) a replicative helicase?

The MCM2-MCM7 (minichromosome maintenance 2-7) complex is involved both in the initiation and the elongation step of eukaryotic DNA replication and is believed to be the replicative helicase. Whereas the mechanism of DNA unwinding at the replication fork has been extensively investigated, the role of the MCM2-MCM7 complex during initiation has not yet been characterized by biochemical studies. Here we summarize the in vivo evidence which supports a role for the MCM complex in origin melting. In addition, we present an overview of the mechanism of action of a number of AAA+ (ATPase associated with various cellular activities) initiators and hexameric helicases, which can be used in turn as models for the steps of recognition, duplex melting, loading and nucleic acid translocation of the MCM helicase.

Coupling of DNA binding and helicase activity is mediated by a conserved loop in the MCM protein

Minichromosome maintenance (MCM) helicases are the presumptive replicative helicases, thought to separate the two strands of chromosomal DNA during replication. In archaea, the catalytic activity resides within the C-terminal region of the MCM protein. In Methanothermobacter thermautotrophicus the N-terminal portion of the protein was shown to be involved in protein multimerization and binding to single and double stranded DNA. MCM homologues from many archaeal species have highly conserved predicted amino acid similarity in a loop located between β7 and β8 in the N-terminal part of the molecule. This high degree of conservation suggests a functional role for the loop. Mutational analysis and biochemical characterization of the conserved residues suggest that the loop participates in communication between the N-terminal portion of the helicase and the C-terminal catalytic domain. Since similar residues are also conserved in the eukaryotic MCM proteins, the data presented here suggest a similar coupling between the N-terminal and catalytic domain of the eukaryotic enzyme.

Differences in the single-stranded DNA binding activities of MCM2-7 and MCM467: MCM2 and MCM5 define a slow ATP-dependent step

The MCM2-7 complex, a hexamer containing six distinct and essential subunits, is postulated to be the eukaryotic replicative DNA helicase. Although all six subunits function at the replication fork, only a specific subcomplex consisting of the MCM4, 6, and 7 subunits (MCM467) and not the MCM2-7 complex exhibits DNA helicase activity in vitro. To understand why MCM2-7 lacks helicase activity and to address the possible function of the MCM2, 3, and 5 subunits, we have compared the biochemical properties of the Saccharomyces cerevisiae MCM2-7 and MCM467 complexes. We demonstrate that both complexes are toroidal and possess a similar ATP-dependent single-stranded DNA (ssDNA) binding activity, indicating that the lack of helicase activity by MCM2-7 is not due to ineffective ssDNA binding. We identify two important differences between them. MCM467 binds dsDNA better than MCM2-7. In addition, we find that the rate of MCM2-7/ssDNA association is slow compared with MCM467; the association rate can be dramatically increased either by preincubation with ATP or by inclusion of mutations that ablate the MCM2/5 active site. We propose that the DNA binding differences between MCM2-7 and MCM467 correspond to a conformational change at the MCM2/5 active site with putative regulatory significance.

Archaeal MCM has separable processivity, substrate choice and helicase domains

The mini-chromosome maintenance (MCM) complex is the principal candidate for the replicative helicase of archaea and eukaryotes. Here, we describe a functional dissection of the roles of the three principal structural modules of the homomultimeric MCM of the hyperthermophilic archaeon Sulfolobus solfataricus. Our results include the first analysis of the central AAA+ domain in isolation. This domain possesses ATPase and helicase activity, defining this as the minimal helicase domain. Reconstitution experiments show that the helicase activity of the AAA+ domain can be stimulated by addition of the isolated N-terminal half in trans. Addition of the N-terminus influences both the processivity of the helicase and the choice of substrate that can be melted by the ATPase domain. The degenerate helix-turn-helix domain at the C-terminus of MCM exerts a negative effect on the helicase activity of the complex. These results provide the first evidence for extensive regulatory inter-domain communication within the MCM complex.

Structural basis of the Methanothermobacter thermautotrophicus MCM helicase activity

The MCM complex from the archaeon Methanother-mobacter thermautotrophicus is a model for the eukaryotic MCM2-7 helicase. We present electron-microscopy single-particle reconstructions of a DNA treated M.thermautotrophicus MCM sample and a ADP.AlF(x) treated sample, respectively assembling as double hexamers and double heptamers. The electron-density maps display an unexpected asymmetry between the two rings, suggesting that large conformational changes can occur within the complex. The structure of the MCM N-terminal domain, as well as the AAA+ and the C-terminal HTH dom-ains of ZraR can be fitted into the reconstructions. Distinct configurations can be modelled for the AAA+ and the HTH domains, suggesting the nature of the conformational change within the complex. The pre-sensor 1 and the helix 2 insertions, important for the activity, can be located pointing towards the centre of the channel in the presence of DNA. We propose a mechanistic model for the helicase activity, based on a ligand-controlled rotation of the AAA+ subunits.