Splicing of the mycobacteriophage Bethlehem DnaB intein: identification of a new mechanistic class of inteins that contain an obligate block F nucleophile

Recent progress in intein research: from mechanism to directed evolution and applications

Inteins catalyze a post-translational modification known as protein splicing, where the intein removes itself from a precursor protein and concomitantly ligates the flanking protein sequences with a peptide bond. Over the past two decades, inteins have risen from a peculiarity to a rich source of applications in biotechnology, biomedicine, and protein chemistry. In this review, we focus on developments of intein-related research spanning the last 5 years, including the three different splicing mechanisms and their molecular underpinnings, the directed evolution of inteins towards improved splicing in exogenous protein contexts, as well as novel applications of inteins for cell biology and protein engineering, which were made possible by a clearer understanding of the protein splicing mechanism.

Faster protein splicing with the Nostoc punctiforme DnaE intein using non-native extein residues

Inteins are naturally occurring intervening sequences that catalyze a protein splicing reaction resulting in intein excision and concatenation of the flanking polypeptides (exteins) with a native peptide bond. Inteins display a diversity of catalytic mechanisms within a highly conserved fold that is shared with hedgehog autoprocessing proteins. The unusual chemistry of inteins has afforded powerful biotechnology tools for controlling enzyme function upon splicing and allowing peptides of different origins to be coupled in a specific, time-defined manner. The extein sequences immediately flanking the intein affect splicing and can be defined as the intein substrate. Because of the enormous potential complexity of all possible flanking sequences, studying intein substrate specificity has been difficult. Therefore, we developed a genetic selection for splicing-dependent kanamycin resistance with no significant bias when six amino acids that immediately flanked the intein insertion site were randomized. We applied this selection to examine the sequence space of residues flanking the Nostoc punctiforme Npu DnaE intein and found that this intein efficiently splices a much wider range of sequences than previously thought, with little N-extein specificity and only two important C-extein positions. The novel selected extein sequences were sufficient to promote splicing in three unrelated proteins, confirming the generalizable nature of the specificity data and defining new potential insertion sites for any target. Kinetic analysis showed splicing rates with the selected exteins that were as fast or faster than the native extein, refuting past assumptions that the naturally selected flanking extein sequences are optimal for splicing.

Engineering split intein DnaE from Nostoc punctiforme for rapid protein purification

We report the engineering of a DnaE intein able to catalyze rapid C-terminal cleavage in the absence of N-terminal cleavage. A single mutation in DnaE intein from Nostoc punctiforme PCC73102 (NpuDnaE), Asp118Gly, was introduced based on sequence alignment with a previously engineered C-terminal cleaving intein mini-MtuRecA. This mutation was able to both suppress N-terminal cleavage and significantly elevate C-terminal cleavage efficiency. Molecular modeling suggests that in NpuDnaE Asp118 forms a hydrogen bond with the penultimate Asn, preventing its spontaneous cyclization prior to N-terminal cleavage. Mutation of Asp118 to Gly essentially abolishes this restriction leading to subsequent C-terminal cleavage in the absence of N-terminal cleavage. The Gly118 NpuDnaE mutant exhibits rapid thio-dependent C-terminal cleavage kinetics with 80% completion within 3 h at room temperature. We used this newly engineered intein to develop both column-free and chromatography-based protein purification methods utilizing the elastin-like-polypeptide and chitin-binding protein as removable purification tags, respectively. We demonstrate rapid target protein purification to electrophoretic purity at yields up to 84 mg per liter of Escherichia coli culture.

Engineering a thermoregulated intein-modified xylanase into maize for consolidated lignocellulosic biomass processing

Plant cellulosic biomass is an abundant, low-cost feedstock for producing biofuels and chemicals. Expressing cell wall-degrading (CWD) enzymes (e.g. xylanases) in plant feedstocks could reduce the amount of enzymes required for feedstock pretreatment and hydrolysis during bioprocessing to release soluble sugars. However, in planta expression of xylanases can reduce biomass yield and plant fertility. To overcome this problem, we engineered a thermostable xylanase (XynB) with a thermostable self-splicing bacterial intein to control the xylanase activity. Intein-modified XynB (iXynB) variants were selected that have <10% wild-type enzymatic activity but recover >60% enzymatic activity upon intein self-splicing at temperatures >59 °C. Greenhouse-grown xynB maize expressing XynB has shriveled seeds and low fertility, but ixynB maize had normal seeds and fertility. Processing dried ixynB maize stover by temperature-regulated xylanase activation and hydrolysis in a cocktail of commercial CWD enzymes produced >90% theoretical glucose and >63% theoretical xylose yields.

The Caulobacter crescentus phage phiCbK: genomics of a canonical phage

Background

The bacterium Caulobacter crescentus is a popular model for the study of cell cycle regulation and senescence. The large prolate siphophage phiCbK has been an important tool in C. crescentus biology, and has been studied in its own right as a model for viral morphogenesis. Although a system of some interest, to date little genomic information is available on phiCbK or its relatives.

Results

Five novel phiCbK-like C. crescentus bacteriophages, CcrMagneto, CcrSwift, CcrKarma, CcrRogue and CcrColossus, were isolated from the environment. The genomes of phage phiCbK and these five environmental phage isolates were obtained by 454 pyrosequencing. The phiCbK-like phage genomes range in size from 205 kb encoding 318 proteins (phiCbK) to 280 kb encoding 448 proteins (CcrColossus), and were found to contain nonpermuted terminal redundancies of 10 to 17 kb. A novel method of terminal ligation was developed to map genomic termini, which confirmed termini predicted by coverage analysis. This suggests that sequence coverage discontinuities may be useable as predictors of genomic termini in phage genomes. Genomic modules encoding virion morphogenesis, lysis and DNA replication proteins were identified. The phiCbK-like phages were also found to encode a number of intriguing proteins; all contain a clearly T7-like DNA polymerase, and five of the six encode a possible homolog of the C. crescentus cell cycle regulator GcrA, which may allow the phage to alter the host cell’s replicative state. The structural proteome of phage phiCbK was determined, identifying the portal, major and minor capsid proteins, the tail tape measure and possible tail fiber proteins. All six phage genomes are clearly related; phiCbK, CcrMagneto, CcrSwift, CcrKarma and CcrRogue form a group related at the DNA level, while CcrColossus is more diverged but retains significant similarity at the protein level.

Conclusions

Due to their lack of any apparent relationship to other described phages, this group is proposed as the founding cohort of a new phage type, the phiCbK-like phages. This work will serve as a foundation for future studies on morphogenesis, infection and phage-host interactions in C. crescentus.

NMR and crystal structures of the Pyrococcus horikoshii RadA intein guide a strategy for engineering a highly efficient and promiscuous intein

In protein splicing, an intervening protein sequence (intein) in the host protein excises itself out and ligates two split host protein sequences (exteins) to produce a mature host protein. Inteins require the involvement for the splicing of the first residue of the extein that follows the intein (which is Cys, Ser, or Thr). Other extein residues near the splicing junctions could modulate splicing efficiency even when they are not directly involved in catalysis. Mutual interdependence between this molecular parasite (intein) and its host protein (exteins) is not beneficial for intein spread but could be advantageous for intein survival during evolution. Elucidating extein-intein dependency has increasingly become important since inteins are recognized as useful biotechnological tools for protein ligation. We determined the structures of one of inteins with high splicing efficiency, the RadA intein from Pyrococcus horikoshii (PhoRadA). The solution NMR structure and the crystal structures elucidated the structural basis for its high efficiency and directed our efforts of engineering that led to rational design of a functional minimized RadA intein. The crystal structure of the minimized RadA intein also revealed the precise interactions between N-extein and the intein. We systematically analyzed the effects at the -1 position of N-extein and were able to significantly improve the splicing efficiency of a less robust splicing variant by eliminating the unfavorable extein-intein interactions observed in the structure. This work provides an example of how unveiling structure-function relationships of inteins offer a promising way of improving their properties as better tools for protein engineering.

Unprecedented rates and efficiencies revealed for new natural split inteins from metagenomic sources

Inteins excise themselves out of precursor proteins by the protein splicing reaction and have emerged as valuable protein engineering tools in numerous and diverse biotechnological applications. Split inteins have recently attracted particular interest because of the opportunities associated with generating a protein from two separate polypeptides and with trans-cleavage applications made possible by split intein mutants. However, natural split inteins are rare and differ greatly in their usefulness with regard to the achievable rates and yields. Here we report the first functional characterization of new split inteins previously identified by bioinformatics from metagenomic sources. The N- and C-terminal fragments of the four inteins gp41-1, gp41-8, NrdJ-1, and IMPDH-1 were prepared as fusion constructs with model proteins. Upon incubation of complementary pairs, we observed trans-splicing reactions with unprecedented rates and yields for all four inteins. Furthermore, no side reactions were detectable, and the precursor constructs were consumed virtually quantitatively. The rate for the gp41-1 intein, the most active intein on all accounts, was k = 1.8 ± 0.5 × 10(-1) s(-1), which is ∼10-fold faster than the rate reported for the Npu DnaE intein and gives rise to completed reactions within 20-30 s. No cross-reactivity in exogenous combinations was observed. Using C1A mutants, all inteins were efficient in the C-terminal cleavage reaction, albeit at lower rates. C-terminal cleavage could be performed under a wide range of reaction conditions and also in the absence of native extein residues flanking the intein. Thus, these inteins hold great potential for splicing and cleavage applications.

Genome sequence of the model hyperthermophilic archaeon Thermococcus litoralis NS-C

The hyperthermophilic archaeon Thermococcus litoralis strain NS-C, first isolated in 1985, has been a foundational organism for archaeal research in biocatalysis, DNA replication, metabolism, and the discovery of inteins. Here, we present the genome sequence of T. litoralis with a focus on the replication machinery and inteins.

The Thermococcus kodakaraensis Tko CDC21-1 intein activates its N-terminal splice junction in the absence of a conserved histidine by a compensatory mechanism

Inteins and other self-catalytic enzymes, such as glycosylasparaginases and hedgehog precursors, initiate autocleavage by converting a peptide bond to a (thio)ester bond when Ser, Thr, or Cys undergoes an N-[S/O] acyl migration assisted by residues within the precursor. Previous studies have shown that a His at position 10 in intein Block B is essential for this initial acyl migration and N-terminal splice junction cleavage. This His is present in all inteins identified to date except the Thermococcus kodakaraensis Tko CDC21-1 intein orthologs and the inactive Arthrobacter species FB24 Arth_1007 intein. This study demonstrates that the Tko CDC21-1 intein is fully active and has replaced the lost catalytic function normally provided by the Block B His using a compensatory mechanism involving a conserved ortholog-specific basic residue (Lys(58)) present outside the standard intein conserved motifs. We propose that Lys(58) catalyzes the initial N-S acyl migration by stabilizing the thiazolidine-tetrahedral intermediate, allowing it to be resolved by water-mediated hydrolysis rather than by protonating the leaving group as His is theorized to do in many other inteins. Autoprocessing enzymes may have more flexibility in evolving catalytic variations because high reaction rates are not required when performing single-turnover reactions on "substrates" that are covalently attached to the enzyme. Consequently, inteins have more flexibility to sample catalytic mechanisms, providing insight into various strategies that enzymes use to accomplish catalysis.

Mycobacteriophage Marvin: a new singleton phage with an unusual genome organization

Mycobacteriophages represent a genetically diverse group of viruses that infect mycobacterial hosts. Although more than 80 genomes have been sequenced, these still poorly represent the likely diversity of the broader population of phages that can infect the host, Mycobacterium smegmatis mc(2)155. We describe here a newly discovered phage, Marvin, which is a singleton phage, having no previously identified close relatives. The 65,100-bp genome contains 107 predicted protein-coding genes arranged in a noncanonical genomic architecture in which a subset of the minor tail protein genes are displaced about 20 kbp from their typical location, situated among nonstructural genes anticipated to be expressed early in lytic growth. Marvin is not temperate, and stable lysogens cannot be recovered from infections, although the presence of a putative xis gene suggests that Marvin could be a relatively recent derivative of a temperate parent. The Marvin genome is replete with novel genes not present in other mycobacteriophage genomes, and although most are of unknown function, the presence of amidoligase and glutamine amidotransferase genes suggests intriguing possibilities for the interactions of Marvin with its mycobacterial hosts.

Probing intein-catalyzed thioester formation by unnatural amino acid substitutions in the active site

Inteins are single-turnover catalysts that splice themselves out of a precursor polypeptide chain. For most inteins, the first step of protein splicing is the formation of a thioester through an N-S acyl shift at the upstream splice junction. However, the mechanism by which this reaction is achieved and the impact of mutations in and close to the active site remain unclear on the atomic level. To investigate these questions, we have further explored a split variant of the Ssp DnaB intein by introducing substitutions with unnatural amino acids within the short synthetic N-terminal fragment. A previously reported collapse of the oxythiazolidine anion intermediate into a thiazoline ring was found to be specificially dependent on the methyl side chain of the flanking Ala(-1). The stereoisomer d-Ala and the constitutional isomers β-Ala and sarcosine did not lead to this side reaction but rather supported splicing. Substitution of the catalytic Cys1 with homocysteine strongly inhibited protein splicing; however, thioester formation was not impaired. These results argue against the requirement of a base to deprotonate the catalytic thiol group prior to the N-S acyl shift, because it should be misaligned for optimal proton abstraction. A previously described mutant intein evolved for more general splicing in different sequence contexts could even rather efficiently splice with this homocysteine. Our findings show the large impact of some subtle structural changes on the protein splicing pathway, but also the remarkable tolerance toward other changes. Such insights will also be important for the biotechnological exploitation of inteins.

Mechanism of C-terminal intein cleavage in protein splicing from QM/MM molecular dynamics simulations

Protein splicing is a post-translational process in which a biologically inactive protein is activated by the release of a segment denoted as an intein. The process involves four steps. In the third, the scission of the intein takes place after the cyclization of the last amino acid of the segment, an asparagine. Little is known about the chemical reaction necessary for this cyclization. Experiments demonstrate that two histidines (the penultimate amino acid of the intein, and a histidine located 10 amino acids upstream) are relevant in the cyclization of the asparagine. We have investigated the mechanism and determinants of reaction in the GyrA intein focusing on the requirements for asparagine activation for its cyclization. First, the influence that the protonation states of these two histidines have on the orientation of the asparagine side chain is investigated by means of molecular dynamics simulation. Molecular dynamics simulations using the CHARMM27 force field were carried out on the three possible protonation states for each of these two histidines. The results indicate that the only protonation state in which the conformation of the system is suitable for cyclization is when the penultimate histidine is fully protonated (positively charged), and the upstream histidine is in the His(ε) neutral tautomeric form. The free energy profile for the reaction in which the asparagine is activated by a proton transfer to the upstream histidine is presented, computed by hybrid quantum mechanics/molecular mechanics (QM/MM) umbrella sampling molecular dynamics at the SCCDFTB/CHARMM27 level of theory. The calculated free energy barrier for the reaction is 19.0 kcal mol(-1). B3LYP/6-31+G(d) QM/MM single-point calculations give a qualitatively a similar energy profile, although with somewhat higher energy barriers, in good agreement with the value derived from experiment of 25 kcal mol(-1) at 60 °C. QM/MM molecular dynamics simulations of the reactant, activated reactant and intermediate states highlight the importance of the Arg181-Val182-Asp183 segment in catalysing the reaction. Overall, the results indicate that nucleophilic activation of the asparagine for its cyclization by the upstream histidine acting as the base is a plausible mechanism for the C-terminal cleavage in protein splicing.

Branched intermediate formation is the slowest step in the protein splicing reaction of the Ala1 KlbA intein from Methanococcus jannaschii

We report the first detailed investigation of the kinetics of protein splicing by the Methanococcus jannaschii KlbA (Mja KlbA) intein. This intein has an N-terminal Ala in place of the nucleophilic Cys or Ser residue that normally initiates splicing but nevertheless splices efficiently in vivo [Southworth, M. W., Benner, J., and Perler, F. B. (2000) EMBO J.19, 5019-5026]. To date, the spontaneous nature of the cis splicing reaction has hindered its examination in vitro. For this reason, we constructed an Mja KlbA intein-mini-extein precursor using intein-mediated protein ligation and engineered a disulfide redox switch that permits initiation of the splicing reaction by the addition of a reducing agent such as dithiothreitol (DTT). A fluorescent tag at the C-terminus of the C-extein permits monitoring of the progress of the reaction. Kinetic analysis of the splicing reaction of the wild-type precursor (with no substitutions in known nucleophiles or assisting groups) at various DTT concentrations shows that formation of the branched intermediate from the precursor is reversible (forward rate constant of 1.5 × 10(-3) s(-1) and reverse rate constant of 1.7 × 10(-5) s(-1) at 42 °C), whereas the productive decay of this intermediate to form the ligated exteins is faster and occurs with a rate constant of 2.2 × 10(-3) s(-1). This finding conflicts with reports about standard inteins, for which Asn cyclization has been assigned as the rate-determining step of the splicing reaction. Despite being the slowest step of the reaction, branched intermediate formation in the Mja KlbA intein is efficient in comparison with those of other intein systems. Interestingly, it also appears that this intermediate is protected against thiolysis by DTT, in contrast to other inteins. Evidence is presented in support of a tight coupling between the N-terminal and C-terminal cleavage steps, despite the fact that the C-terminal single-cleavage reaction occurs in variant Mja KlbA inteins in the absence of N-terminal cleavage. We posit that the splicing events in the Mja KlbA system are tightly coordinated by a network of intra- and interdomain noncovalent interactions, rendering its function particularly sensitive to minor disruptions in the intein or extein environments.

The Arthrobacter species FB24 Arth_1007 (DnaB) intein is a pseudogene

An Arthrobacter species FB24 gene (locus tag Arth_1007) was previously annotated as a putative intein-containing DnaB helicase of phage origin (Arsp-FB24 DnaB intein). However, it is not a helicase gene because the sequence similarity is limited to inteins. In fact, the flanking exteins total only 66 amino acids. Therefore, the intein should be referred to as the Arsp-FB24 Arth_1007 intein. The Arsp-FB24 Arth_1007 intein failed to splice in its native precursor and in a model precursor. We previously noted that the Arsp-FB24 Arth_1007 intein is the only putative Class 3 intein that is missing the catalytically essential Cys at position 4 of intein Motif F, which is one of the three defining signature residues of this class. Additionally, a catalytically essential His in position 10 of intein Motif B is also absent; this His is the most conserved residue amongst all inteins. Splicing activity was not rescued when these two catalytically important positions were 'reverted' back to their consensus residues. This study restores the unity of the Class 3 intein signature sequence in active inteins by demonstrating that the Arsp-FB24 Arth_1007 intein is an inactive pseudogene.

Protein trans-splicing as a protein ligation tool to study protein structure and function

Protein trans-splicing (PTS) exerted by split inteins is a protein ligation reaction which enables overcoming the barriers of conventional heterologous protein production. We provide an overview of the current state-of-the-art in split intein engineering, as well as the achievements of PTS technology in the realm of protein structure-function analyses, including incorporation of natural and artificial protein modifications, controllable protein reconstitution, segmental isotope labeling and protein cyclization. We further discuss factors crucial for the successful implementation of PTS in these protein engineering approaches, and speculate on necessary future endeavours to make PTS a universally applicable protein ligation tool.

Expanding the definition of class 3 inteins and their proposed phage origin

Inteins are the protein equivalent of introns. Their protein splicing activity is essential for the host protein's maturation and function. Inteins are grouped into three classes based on sequence signature and splicing mechanism. The sequence signature of the recently characterized class 3 inteins is a noncontiguous Trp-Cys-Thr (WCT) motif and the absence of the standard class 1 Cys¹ or Ser¹ N-terminal nucleophile. The intein N-terminal Cys¹ or Ser¹ residue is essential for splicing in class 1 inteins. The mycobacteriophage Catera Gp206, Nocardioides sp. strain JS614 TOPRIM, and Thermobifida fusca YX Tfu2914 inteins have a mixture of class 1 and class 3 motifs. They carry the class 3 Trp-Cys-Thr motif and have the standard class 1 N-terminal Ser¹ or Cys¹. This study determined which class the mycobacteriophage Catera Gp206 and Nocardioides sp. JS614 TOPRIM inteins belong to based on catalytic mechanism. The mycobacteriophage Catera Gp206 intein (starting with Ser¹) is a class 3 intein, and its Ser¹ residue is not required for splicing. Based on phylogenetic analysis, we propose that class 3 inteins arose from a single mutated intein that was spread by phage into predominantly helicase genes in various phages and their hosts.

Expanding the diversity of mycobacteriophages: insights into genome architecture and evolution

Mycobacteriophages are viruses that infect mycobacterial hosts such as Mycobacterium smegmatis and Mycobacterium tuberculosis. All mycobacteriophages characterized to date are dsDNA tailed phages, and have either siphoviral or myoviral morphotypes. However, their genetic diversity is considerable, and although sixty-two genomes have been sequenced and comparatively analyzed, these likely represent only a small portion of the diversity of the mycobacteriophage population at large. Here we report the isolation, sequencing and comparative genomic analysis of 18 new mycobacteriophages isolated from geographically distinct locations within the United States. Although no clear correlation between location and genome type can be discerned, these genomes expand our knowledge of mycobacteriophage diversity and enhance our understanding of the roles of mobile elements in viral evolution. Expansion of the number of mycobacteriophages grouped within Cluster A provides insights into the basis of immune specificity in these temperate phages, and we also describe a novel example of apparent immunity theft. The isolation and genomic analysis of bacteriophages by freshman college students provides an example of an authentic research experience for novice scientists.

Spontaneous proton transfer to a conserved intein residue determines on-pathway protein splicing

The discovery of inteins, which are protein-splicing elements, has stimulated interest for various applications in chemical biology, bioseparations, drug delivery, and sensor development. However, for inteins to effectively contribute to these applications, an increased mechanistic understanding of cleavage and splicing reactions is required. While the multistep chemical reaction that leads to splicing is often explored and utilized, it is not clear how the intein navigates through the reaction space. The sequence of reaction steps must progress in concert in order to yield efficient splicing while minimizing off-pathway cleavage reactions. In this study, we demonstrate that formation of a previously identified branched intermediate is the critical step for determining splicing over cleavage products. By combining experimental assays and quantum mechanical simulations, we identify the electrostatic interactions that are important to the dynamics of the reaction steps. We illustrate, via an animated simulation trajectory, a proton transfer from the first C-terminal extein residue to a conserved aspartate, which synchronizes the multistep enzymatic reaction that is key to splicing. This work provides new insights into the complex interplay between critical active-site residues in the protein splicing mechanism, thereby facilitating biotechnological application while shedding light on multistep enzyme activity.

Mycobacteriophages: genes and genomes

Viruses are powerful tools for investigating and manipulating their hosts, but the enormous size and amazing genetic diversity of the bacteriophage population have emerged as something of a surprise. In light of the evident importance of mycobacteria to human health--especially Mycobacterium tuberculosis, which causes tuberculosis--and the difficulties that have plagued their genetic manipulation, mycobacteriophages are especially appealing subjects for discovery, genomic characterization, and manipulation. With more than 70 complete genome sequences available, the mycobacteriophages have provided a wealth of information on the diversity of phages that infect a common bacterial host, revealed the pervasively mosaic nature of phage genome architectures, and identified a huge number of genes of unknown function. Mycobacteriophages have provided key tools for tuberculosis genetics, and new methods for simple construction of mycobacteriophage recombinants will facilitate postgenomic explorations into mycobacteriophage biology.

Canonical protein splicing of a class 1 intein that has a class 3 noncanonical sequence motif

A Thermobifida fusca intein has two characteristics of class 3 inteins: a noncontiguous covariant Trp-Cys-Thr triplet and a Ser flanking its C terminus. However, it has Cys at position one, characteristic of class 1 inteins. Splicing does not require the internal Cys, which may instead coordinate the active site. Therefore, the intein is class 1.

The Deinococcus radiodurans Snf2 intein caught in the act: detection of the Class 3 intein signature Block F branched intermediate

Inteins are the protein equivalent of introns. They are remarkable and robust single turnover enzymes that splice out of precursor proteins during post-translational maturation of the host protein (extein). The Deinococcus radiodurans Snf2 intein is the second member of the recently discovered Class 3 subfamily of inteins to be characterized. Class 3 inteins have a unique sequence signature: (a) they start with residues other than the standard Class 1 Cys, Ser or Thr, (b) have a noncontiguous, centrally located Trp/Cys/Thr triplet, and (c) all but one have Ser or Thr at the start of the C-extein instead of the more common Cys. We previously proposed that Class 3 inteins splice by a variation in the standard intein-mediated protein splicing mechanism that includes a novel initiating step leading to the formation of a previously unrecognized branched intermediate. In this mechanism defined with the Class 3 prototypic Mycobacteriophage Bethlehem DnaB intein, the triplet Cys attacks the peptide bond at the N-terminal splice junction to form the class specific branched intermediate after which the N-extein is transferred to the side chain of the Ser, Thr, or Cys at the C-terminal splice junction to form the standard intein branched intermediate. Analysis of the Deinococcus radiodurans Snf2 intein confirms this splicing mechanism. Moreover, the Class 3 specific Block F branched intermediate was isolated, providing the first direct proof of its existence.

Inteins, valuable genetic elements in molecular biology and biotechnology

Inteins are internal protein elements that self-excise from their host protein and catalyze ligation of the flanking sequences (exteins) with a peptide bond. They are found in organisms in all three domains of life, and in viral proteins. Intein excision is a posttranslational process that does not require auxiliary enzymes or cofactors. This self-excision process is called protein splicing, by analogy to the splicing of RNA introns from pre-mRNA. Protein splicing involves only four intramolecular reactions, and a small number of key catalytic residues in the intein and exteins. Protein-splicing can also occur in trans. In this case, the intein is separated into N- and C-terminal domains, which are synthesized as separate components, each joined to an extein. The intein domains reassemble and link the joined exteins into a single functional protein. Understanding the cis- and trans-protein splicing mechanisms led to the development of intein-mediated protein-engineering applications, such as protein purification, ligation, cyclization, and selenoprotein production. This review summarizes the catalytic activities and structures of inteins, and focuses on the advantages of some recent intein applications in molecular biology and biotechnology.

Comparative genomic analysis of 60 Mycobacteriophage genomes: genome clustering, gene acquisition, and gene size

Mycobacteriophages are viruses that infect mycobacterial hosts. Expansion of a collection of sequenced phage genomes to a total of 60-all infecting a common bacterial host-provides further insight into their diversity and evolution. Of the 60 phage genomes, 55 can be grouped into nine clusters according to their nucleotide sequence similarities, 5 of which can be further divided into subclusters; 5 genomes do not cluster with other phages. The sequence diversity between genomes within a cluster varies greatly; for example, the 6 genomes in Cluster D share more than 97.5% average nucleotide similarity with one another. In contrast, similarity between the 2 genomes in Cluster I is barely detectable by diagonal plot analysis. In total, 6858 predicted open-reading frames have been grouped into 1523 phamilies (phams) of related sequences, 46% of which possess only a single member. Only 18.8% of the phams have sequence similarity to non-mycobacteriophage database entries, and fewer than 10% of all phams can be assigned functions based on database searching or synteny. Genome clustering facilitates the identification of genes that are in greatest genetic flux and are more likely to have been exchanged horizontally in relatively recent evolutionary time. Although mycobacteriophage genes exhibit a smaller average size than genes of their host (205 residues compared with 315), phage genes in higher flux average only 100 amino acids, suggesting that the primary units of genetic exchange correspond to single protein domains.