The amino-terminal domain of the E subunit of vacuolar H(+)-ATPase (V-ATPase) interacts with the H subunit and is required for V-ATPase function

Renal vacuolar H+-ATPase

Vacuolar H(+)-ATPases are ubiquitous multisubunit complexes mediating the ATP-dependent transport of protons. In addition to their role in acidifying the lumen of various intracellular organelles, vacuolar H(+)-ATPases fulfill special tasks in the kidney. Vacuolar H(+)-ATPases are expressed in the plasma membrane in the kidney almost along the entire length of the nephron with apical and/or basolateral localization patterns. In the proximal tubule, a high number of vacuolar H(+)-ATPases are also found in endosomes, which are acidified by the pump. In addition, vacuolar H(+)-ATPases contribute to proximal tubular bicarbonate reabsorption. The importance in final urinary acidification along the collecting system is highlighted by monogenic defects in two subunits (ATP6V0A4, ATP6V1B1) of the vacuolar H(+)-ATPase in patients with distal renal tubular acidosis. The activity of vacuolar H(+)-ATPases is tightly regulated by a variety of factors such as the acid-base or electrolyte status. This regulation is at least in part mediated by various hormones and protein-protein interactions between regulatory proteins and multiple subunits of the pump.

Three-Dimensional Structure of the Vacuolar ATPase

The structure of the proton-pumping vacuolar ATPase (V-ATPase) from bovine brain clathrin coated vesicles was analyzed by electron microscopy and single molecule image analysis. A three-dimensional structural model of the complex was calculated by the angular reconstitution method at a resolution of 27 A. Overall, the appearance of the V(0) and V(1) domains in the three-dimensional model of the intact bovine V-ATPase resembles the models of the isolated bovine V(0) and yeast V(1) domains determined previously. To determine the binding position of subunit H in the V-ATPase, electron microscopy and cysteine-mediated photochemical cross-linking were used. Difference maps calculated from projection images of intact bovine V-ATPase and a V-ATPase preparation in which the two H subunit isoforms were removed by treatment with cystine revealed less protein density at the bottom of the V(1) in the subunit H-depleted enzyme, suggesting that subunit H isoforms bind at the interface of the V(1) and V(0) domains. A comparison of three-dimensional models calculated for intact and subunit H-depleted enzyme indicated that at least one of the subunit H isoforms, although poorly resolved in the three-dimensional electron density, binds near the putative N-terminal domain of the a subunit of the V(0). For photochemical cross-linking, unique cysteine residues were introduced into the yeast V-ATPase B subunit at sites that were localized based on molecular modeling using the crystal structure of the mitochondrial F(1) domain. Cross-linking was performed using the photoactivatable sulfhydryl reagent 4-(N-maleimido)benzophenone. Cross-linking to subunit H was observed from two sites on subunit B (E494 and T501) predicted to be located on the outer surface of the subunit closest to the membrane. Results from both electron microscopy and cross-linking analysis thus place subunit H near the interface of the V(1) and V(0) domains and suggest a close structural similarity between the V-ATPases of yeast and mammals.

Assembly and regulation of the yeast vacuolar H+-ATPase

The yeast vacuolar proton-translocating ATPase (V-ATPase) is an excellent model for V-ATPases in all eukaryotic cells. Activity of the yeast V-ATPase is reversibly down-regulated by disassembly of the peripheral (V1) sector, which contains the ATP-binding sites, from the membrane (V0) sector, which contains the proton pore. A similar regulatory mechanism has been found in Manduca sexta and is believed to operate in other eukaryotes. We are interested in the mechanism of reversible disassembly and its implications for V-ATPase structure. In this review, we focus on (1) characterization of the yeast V-ATPase stalk subunits, which form the interface between V1 and V0, (2) potential mechanisms of silencing ATP hydrolytic activity in disassembled V1 sectors, and (3) the structure and function of RAVE, a recently discovered complex that regulates V-ATPase assembly.

Subunit composition, structure, and distribution of bacterial V-type ATPases

The overall structure of V-ATPase complexes resembles that of F-type ATPases, but the stalk region is different and more complex. Database searches followed by sequence analysis of the five water-soluble stalk region subunits C-G revealed that (i) to date V-ATPases are found in 16 bacterial species, (ii) bacterial V-ATPases are closer to archaeal A-ATPases than to eukaryotic V-ATPases, and (iii) different groups of bacterial V-ATPases exist. Inconsistencies in the nomenclature of types and subunits are addressed. Attempts to assign subunit positions in V-ATPases based on biochemical experiments, chemical cross-linking, and electron microscopy are discussed. A structural model for prokaryotic and eukaryotic V-ATPases is proposed. The prokaryotic V-ATPase is considered to have a central stalk between headpiece and membrane flanked by two peripheral stalks. The eukaryotic V-ATPases have one additional peripheral stalk.

The glycolytic enzyme aldolase mediates assembly, expression, and activity of vacuolar H+-ATPase

Vacuolar H(+)-ATPases (V-ATPases) are a family of highly conserved proton pumps that couple hydrolysis of cytosolic ATP to proton transport out of the cytosol. How ATP is supplied for V-ATPase-mediated hydrolysis and for coupling of proton transport is poorly understood. We have reported that the glycolytic enzyme aldolase physically associates with V-ATPase. Here we show that aldolase interacts with three different subunits of V-ATPase (subunits a, B, and E). The binding sites for the V-ATPase subunits on aldolase appear to be on distinct interfaces of the glycolytic enzyme. Aldolase deletion mutant cells were able to grow in medium buffered at pH 5.5 but not at pH 7.5, displaying a growth phenotype similar to that observed in V-ATPase subunit deletion mutants. Abnormalities in V-ATPase assembly and protein expression observed in aldolase deletion mutant cells could be fully rescued by aldolase complementation. The interaction between aldolase and V-ATPase increased dramatically in the presence of glucose, suggesting that aldolase may act as a glucose sensor for V-ATPase regulation. Taken together, these findings provide functional evidence that the ATP-generating glycolytic pathway is directly coupled to the ATP-hydrolyzing proton pump through physical interaction between aldolase and V-ATPase.

Yeast V1-ATPase: affinity purification and structural features by electron microscopy

V1-ATPase from the yeast Saccharomyces cerevisiae was purified via a FLAG affinity tag introduced into the N terminus of the G subunit. The preparation migrated as a single band in native gel electrophoresis and contained subunits ABCDEFGH (with subunit C present at substoichiometric amounts) as determined by matrix-assisted laser desorption ionization time-of-flight mass spectrometry. The initial specific Ca-ATPase activity was approximately 6 micromol/min/mg. The structure of the yeast V1-ATPase was studied by electron microscopy of negatively stained and frozen hydrated samples. A 25-A resolution three-dimensional model of the complex was calculated from two-dimensional projections by the angular reconstitution technique. The model shows six elongated densities arranged in pseudo-3-fold symmetry around a large central cavity. At the top of the molecule, various protrusions can be seen. At the bottom of the complex, two large masses are visible that are connected to the main body of the molecule. Comparison of the yeast V1 structure with the structure of the intact V1V0-ATPase from bovine brain clathrin-coated vesicles (Wilkens, S., Vasilyeva, E., and Forgac, M. (1999) J. Biol. Chem. 274, 31804-31810) indicates that the structure of the isolated V1 from yeast is very similar to the structure of the V1 domain in the intact V-ATPase complex.

Dimer formation of subunit G of the yeast V-ATPase

The G subunit of the vacuolar ATPase (V-ATPase) is a component of the stalk connecting the V(1) and V(O) sectors of the enzyme and is essential for normal assembly and function. Subunit G (Vma10p) of the yeast V-ATPase was expressed in Escherichia coli as a soluble protein and was purified to homogeneity. The molecular mass of subunit G, determined by Native-polyacrylamide gel electrophoresis, gel filtration analysis and small-angle X-ray scattering, was approximately 28+/-2 kDa, indicating that this protein is dimeric. With a radius of gyration (R(g)) and a maximum size (D(max)) of 2.7+/-0.2 nm and 8.0+/-0.3 nm, respectively, the G-dimer is rather elongated. To understand which region of subunit G is required to mediate dimerization, a G(38-144) form (the carboxyl-terminus) was expressed and purified. G(38-144) is homogeneous, with a molecular mass of approximately 12+/-3 kDa, indicating a monomeric form in solution.

The a-subunit of the V-type H+-ATPase interacts with phosphofructokinase-1 in humans

V-type or H+-ATPases are a family of ATP-dependent proton pumps that move protons across the plasma membrane at specialized sites such as kidney epithelial cells and osteoclasts as well as acidifying intracellular compartments. The 100-kDa polytopic a-subunit of this group of ATPases is suggested to play an important role in coupling the two functions of the pump, ATP hydrolysis and proton transport. In man, different a-subunit isoforms are encoded by four genes. ATP6V0A4 encodes a4, which is expressed apically in alpha-intercalated cells in both human and mouse kidney. We sought binding partners for the C terminus of a4 in order to address its potential role in the H+-ATPase complex. Random peptide phage display analysis revealed a consensus motif (WLELRP) with almost complete homology to part of the enzyme phosphofructokinase 1 (PFK-1). Activity of this enzyme is the rate-limiting step in glycolysis. Specificity of a4 binding to this peptide was confirmed by enzyme-linked immunosorbent assay. Protein-protein interaction was further demonstrated by co-immunoprecipitation of a4 with PFK-1 from solubilized human kidney membrane proteins. An in vitro bead-bound PFK-1 pull-down assay showed that this interaction was also true for the ubiquitously expressed a1 subunit. Finally, PFK-1 co-immunolocalized with a4 in alpha-intercalated cells in the collecting ducts of human kidney. These findings indicate a direct link between V-type H+-ATPases and glycolysis via the C-terminal region of the a-subunit of the pump and suggest a novel regulatory mechanism between H+-ATPase function and energy supply. This interaction between the a-subunit and PFK-1 also provides new evidence that the C terminus of this subunit lies cytoplasmically in vivo.

Expression, purification, and characterization of subunit E, an essential subunit of the vacuolar ATPase

A recombinant form of subunit E (Vma4p) from yeast vacuolar ATPases (V-ATPases) has been overexpressed in Escherichia coli, purified to homogeneity, and explored by mass spectrometry. Analysis of the secondary structure of Vma4p by circular dichroism spectroscopy indicated 32% alpha-helix and 23% beta-sheet content. Vma4p formed a hybrid-complex with the nucleotide-binding subunits alpha and beta of the closely related F(1) ATPase of the thermophilic bacterium PS3 (TF(1)). The alpha(3)beta(3)E-hybrid-complex had 56% of the ATPase activity of the native TF(1). By comparison, an alpha(3)beta(3)-formation without Vma4p showed about 24% of total TF(1) ATPase activity. This is the first demonstration of a hydrolytically active hybrid-complex consisting of F(1) and V(1) subunits. The arrangement of subunit E in V(1) has been probed using the recombinant Vma4p, the alpha(3)beta(3)E-hybrid-complex together with V(1) and an A(3)B(3)HEG-subcomplex of the V(1) ATPase from Manduca sexta, respectively, indicating that subunit E is shielded in V(1).