XCTK2: a kinesin-related protein that promotes mitotic spindle assembly in Xenopus laevis egg extracts

Proper organization of microtubule minus ends is needed for midzone stability and cytokinesis

Successful cytokinesis is critical for maintaining genome stability and requires the assembly of a robust central spindle to specify the cleavage furrow position, to prevent separated chromosomes from coming back together, and to contribute to midbody abscission. A proper central spindle is assembled and maintained by a number of microtubule-associated and molecular motor proteins that sort microtubules into bundles with their plus ends overlapping at the center. The mechanisms by which different factors organize the central spindle microtubules remain unclear. We found that perturbation of the minus-end-directed Kinesin-14 HSET increased the frequency of polyploid cells, which resulted from a failure in cytokinesis. In addition, HSET knockdown resulted in severe midzone microtubule organization, most notably at microtubule minus ends, as well as mislocalization of several midbody-associated proteins. Biochemical analysis showed that both human HSET and Xenopus XCTK2 cofractionated with the gamma-tubulin ring complexes on sucrose gradients and that XCTK2 associated with gamma-tubulin and Xgrip109 by immunoprecipitation. Our data reveal the novel finding that a minus-end-directed motor contributes to the organization and stability of the central spindle, which is needed for proper cytokinesis.

Molecular cloning and characterization of KIFC1-like kinesin gene (ot-kifc1) from Octopus tankahkeei

Spermiogenesis in Octopus tankahkeei involves striking cellular reorganization to generate a mature spermatozoon. This process may require spermatid-specific adaptation of cytoskeleton and associated molecular motor proteins. KIFC1 is a C-terminal kinesin motor with important roles in acrosome biogenesis and nuclear reshaping during spermiogenesis in rat. Here, we have cloned and characterized the gene encoding a homologue of rat KIFC1, termed as ot-kifc1, from the testis of O. tankahkeei. The 2229 bp complete cDNA contains a 75 bp 5'-untranslated region, a 1992 bp open reading frame and a 162 bp 3'-untranslated region. The deduced protein shares an overall identity of 40%, 41%, 39% and 41% with its counterpart from human, rat, mouse and African clawed frog, respectively. Tissue expression analysis revealed ot-kifc1 was expressed in testis, gill and hepatopancreas, but not in other tissues examined. In situ hybridization result showed the ot-kifc1 message was hardly detectable in early spermatid, concentrated at the tail region of intermediate spermatid, abundant in spermatid undergoing dramatic elongation and compression, enriched at one end in late spermatids and disappeared in mature sperm. In conclusion, the expression of ot-kifc1 at specific stages of spermiogenesis suggests a role for this motor in major cytological transformations.

Chromosome congression in the absence of kinetochore fibres

Proper chromosome congression (the process of aligning chromosomes on the spindle) contributes to accurate and faithful chromosome segregation. It is widely accepted that congression requires ‘K-fibres’, microtubule bundles that extend from the kinetochores to spindle poles1, 2. Here we demonstrate that chromosomes in human cells co-depleted for HSET (kinesin-14)3, 4 and hNuf2 (a component of the Ndc80/Hec1 complex)5 can congress to the metaphase plate in the absence of K-fibres. However, the chromosomes were not stably maintained at the metaphase plate under these conditions. Chromosome congression in HSET+hNuf2 co-depleted cells required the plus-end directed motor CENP-E (kinesin-7)6, which has been implicated in the gliding of mono-oriented kinetochores alongside adjacent K-fibres7. Thus, proper end-on attachment of kinetochores to microtubules is not necessary for chromosome congression. Instead, our data support the idea that congression allows unattached chromosomes to move to the middle of the spindle where they have a higher probability of establishing connections with both spindle poles. These bi-oriented connections are also utilized to maintain stable chromosome alignment at the spindle equator.

Spindle fusion requires dynein-mediated sliding of oppositely oriented microtubules

BACKGROUND

Bipolar spindle assembly is critical for achieving accurate segregation of chromosomes. In the absence of centrosomes, meiotic spindles achieve bipolarity by a combination of chromosome-initiated microtubule nucleation and stabilization and motor-driven organization of microtubules. Once assembled, the spindle structure is maintained on a relatively long time scale despite the high turnover of the microtubules that comprise it. To study the underlying mechanisms responsible for spindle assembly and steady-state maintenance, we used microneedle manipulation of preassembled spindles in Xenopus egg extracts.

RESULTS

When two meiotic spindles were brought close enough together, they interacted, creating an interconnected microtubule structure with supernumerary poles. Without exception, the perturbed system eventually re-established bipolarity, forming a single spindle of normal shape and size. Bipolar spindle fusion was blocked when cytoplasmic dynein function was perturbed, suggesting a critical role for the motor in this process. The fusion of Eg5-inhibited monopoles also required dynein function but only occurred if the initial interpolar separation was less than twice the microtubule radius of a typical monopole.

CONCLUSIONS

Our experiments uniquely illustrate the architectural plasticity of the spindle and reveal a robust ability of the system to attain a bipolar morphology. We hypothesize that a major mechanism driving spindle fusion is dynein-mediated sliding of oppositely oriented microtubules, a novel function for the motor, and posit that this same mechanism might also be involved in normal spindle assembly and homeostasis.

Kinesin-14 family proteins HSET/XCTK2 control spindle length by cross-linking and sliding microtubules

Kinesin-14 family proteins are minus-end directed motors that cross-link microtubules and play key roles during spindle assembly. We showed previously that the Xenopus Kinesin-14 XCTK2 is regulated by Ran via the association of a bipartite NLS in the tail of XCTK2 with importin alpha/beta, which regulates its ability to cross-link microtubules during spindle formation. Here we show that mutation of the nuclear localization signal (NLS) of human Kinesin-14 HSET caused an accumulation of HSET in the cytoplasm, which resulted in strong microtubule bundling. HSET overexpression in HeLa cells resulted in longer spindles, similar to what was seen with NLS mutants of XCTK2 in extracts, suggesting that Kinesin-14 proteins play similar roles in extracts and in somatic cells. Conversely, HSET knockdown by RNAi resulted in shorter spindles but did not affect pole formation. The change in spindle length was not dependent on K-fibers, as elimination of the K-fiber by Nuf2 RNAi resulted in an increase in spindle length that was partially rescued by co-RNAi of HSET. However, these changes in spindle length did require microtubule sliding, as overexpression of an HSET mutant that had its sliding activity uncoupled from its ATPase activity resulted in cells with spindle lengths shorter than cells overexpressing wild-type HSET. Our results are consistent with a model in which Ran regulates the association of Kinesin-14s with importin alpha/beta to prevent aberrant cross-linking and bundling of microtubules by sequestering Kinesin-14s in the nucleus during interphase. Kinesin-14s act during mitosis to cross-link and slide between parallel microtubules to regulate spindle length.

Aurora A phosphorylates MCAK to control ran-dependent spindle bipolarity

During mitosis, mitotic centromere-associated kinesin (MCAK) localizes to chromatin/kinetochores, a cytoplasmic pool, and spindle poles. Its localization and activity in the chromatin region are regulated by Aurora B kinase; however, how the cytoplasmic- and pole-localized MCAK are regulated is currently not clear. In this study, we used Xenopus egg extracts to form spindles in the absence of chromatin and centrosomes and found that MCAK localization and activity are tightly regulated by Aurora A. This regulation is important to focus microtubules at aster centers and to facilitate the transition from asters to bipolar spindles. In particular, we found that MCAK colocalized with NuMA and XMAP215 at the center of Ran asters where its activity is regulated by Aurora A-dependent phosphorylation of S196, which contributes to proper pole focusing. In addition, we found that MCAK localization at spindle poles was regulated through another Aurora A phosphorylation site (S719), which positively enhances bipolar spindle formation. This is the first study that clearly defines a role for MCAK at the spindle poles as well as identifies another key Aurora A substrate that contributes to spindle bipolarity.

Identification of motor protein cargo by yeast 2-hybrid and affinity approaches

Identification of the molecular composition of the cargo transported by individual kinesin motors is critical to an understanding of both motor function and regulation of the proper intracellular placement of numerous cellular components including proteins, RNA, and organelles. In this chapter, we describe methods to identify the motor tail sequences responsible for cargo binding by expression of green fluorescent protein (GFP)-motor tail fusion proteins in mammalian cells. In addition, we detail two complementary approaches to identify specific proteins associated with these targeting sequences: a yeast 2-hybrid screen and affinity chromatography.

Mechanisms of mitotic spindle assembly and function

The mitotic spindle is the macromolecular machine that segregates chromosomes to two daughter cells during mitosis. The major structural elements of the spindle are microtubule polymers, whose intrinsic polarity and dynamic properties are critical for bipolar spindle organization and function. In most cell types, spindle microtubule nucleation occurs primarily at two centrosomes, which define the spindle poles, but microtubules can also be generated by the chromosomes and within the spindle itself. Many associated factors help organize the spindle, including molecular motors and regulators of microtubule dynamics. The past decade has provided a wealth of information on the molecular players that are critical for spindle assembly as well as a high-resolution view of the intricate movements and dynamics of the spindle microtubules and the chromosomes. In this chapter we provide a historical account of the key observations leading to current models of spindle assembly, as well as an up-to-date status report on this exciting field.

Acrylamide effects on kinesin-related proteins of the mitotic/meiotic spindle

The microtubule (MT) motor protein kinesin is a vital component of cells and organs expressing acrylamide (ACR) toxicity. As a mechanism of its potential carcinogenicity, we determined whether kinesins involved in cell division are inhibited by ACR similar to neuronal kinesin [Sickles, D.W., Brady, S.T., Testino, A.R., Friedman, M.A., and Wrenn, R.A. (1996). Direct effect of the neurotoxicant acrylamide on kinesin-based microtubule motility. Journal of Neuroscience Research 46, 7-17.] Kinesin-related genes were isolated from rat testes [Navolanic, P.M., and Sperry, A.O. (2000). Identification of isoforms of a mitotic motor in mammalian spermatogenesis. Biology of Reproduction 62, 1360-1369.], their kinesin-like proteins expressed in bacteria using recombinant DNA techniques and the effects of ACR, glycidamide (GLY) and propionamide (a non-neurotoxic metabolite) on the function of two of the identified kinesin motors were tested. KIFC5A MT bundling activity, required for mitotic spindle formation, was measured in an MT-binding assay. Both ACR and GLY caused a similar concentration-dependent reduction in the binding of MT; concentrations of 100 microM ACR or GLY reduced its activity by 60%. KRP2 MT disassembling activity was assayed using the quantity of tubulin disassembled from taxol-stabilized MT. Both ACR and GLY inhibited KRP2-induced MT disassembly. GLY was substantially more potent; significant reductions of 60% were achieved by 500 microM, a comparable inhibition by ACR required a 5 mM concentration. Propionamide had no significant effect on either kinesin, except KRP2 at 10 mM. This is the first report of ACR inhibition of a mitotic/meiotic motor protein. ACR (or GLY) inhibition of kinesin may be an alternative mechanism to DNA adduction in the production of cell division defects and potential carcinogenicity. We conclude that ACR may act on multiple kinesin family members and produce toxicities in organs highly dependent on microtubule-based functions.

The kinesin-13 proteins Kif2a, Kif2b, and Kif2c/MCAK have distinct roles during mitosis in human cells

The human genome has three unique genes coding for kinesin-13 proteins called Kif2a, Kif2b, and MCAK (Kif2c). Kif2a and MCAK have documented roles in mitosis, but the function of Kif2b has not been defined. Here, we show that Kif2b is expressed at very low levels in cultured cells and that GFP-Kif2b localizes predominately to centrosomes and midbodies, but also to spindle microtubules and transiently to kinetochores. Kif2b-deficient cells assemble monopolar or disorganized spindles. Chromosomes in Kif2b-deficient cells show typical kinetochore-microtubule attachments, but the velocity of movement is reduced approximately 80% compared with control cells. Some Kif2b-deficient cells attempt anaphase, but the cleavage furrow regresses and cytokinesis fails. Like Kif2a-deficient cells, bipolar spindle assembly can be restored to Kif2b-deficient cells by simultaneous deficiency of MCAK or Nuf2 or treatment with low doses of nocodazole. However, Kif2b-deficient cells are unique in that they assemble bipolar spindles when the pole focusing activities of NuMA and HSET are perturbed. These data demonstrate that Kif2b function is required for spindle assembly and chromosome movement and that the microtubule depolymerase activities of Kif2a, Kif2b, and MCAK fulfill distinct functions during mitosis in human cells.

The interplay of the N- and C-terminal domains of MCAK control microtubule depolymerization activity and spindle assembly

Spindle assembly and accurate chromosome segregation require the proper regulation of microtubule dynamics. MCAK, a Kinesin-13, catalytically depolymerizes microtubules, regulates physiological microtubule dynamics, and is the major catastrophe factor in egg extracts. Purified GFP-tagged MCAK domain mutants were assayed to address how the different MCAK domains contribute to in vitro microtubule depolymerization activity and physiological spindle assembly activity in egg extracts. Our biochemical results demonstrate that both the neck and the C-terminal domain are necessary for robust in vitro microtubule depolymerization activity. In particular, the neck is essential for microtubule end binding, and the C-terminal domain is essential for tight microtubule binding in the presence of excess tubulin heterodimer. Our physiological results illustrate that the N-terminal domain is essential for regulating microtubule dynamics, stimulating spindle bipolarity, and kinetochore targeting; whereas the C-terminal domain is necessary for robust microtubule depolymerization activity, limiting spindle bipolarity, and enhancing kinetochore targeting. Unexpectedly, robust MCAK microtubule (MT) depolymerization activity is not needed for sperm-induced spindle assembly. However, high activity is necessary for proper physiological MT dynamics as assayed by Ran-induced aster assembly. We propose that MCAK activity is spatially controlled by an interplay between the N- and C-terminal domains during spindle assembly.

The kinesin ATK5 functions in early spindle assembly in Arabidopsis

During cell division, the mitotic spindle partitions chromosomes into daughter nuclei. In higher plants, the molecular mechanisms governing spindle assembly and function remain largely unexplored. Here, live cell imaging of mitosis in Arabidopsis thaliana plants lacking a kinesin-14 (ATK5) reveals defects during early spindle formation. Beginning during prophase and lasting until late prometaphase, spindles of atk5-1 plants become abnormally elongated, are frequently bent, and have splayed poles by prometaphase. The period of spindle elongation during prophase and prometaphase is prolonged in atk5-1 cells. Time-lapse imaging of yellow fluorescent protein:ATK5 reveals colocalization with perinuclear microtubules before nuclear envelope breakdown, after which it congresses inward from the poles to the midzone, where it becomes progressively enriched at regions of overlap between antiparallel microtubules. In vitro microtubule motility assays demonstrate that in the presence of ATK5, two microtubules encountering one another at an angle can interact and coalign, forming a linear bundle. These data indicate that ATK5 participates in the search and capture of antiparallel interpolar microtubules, where it aids in generating force to coalign microtubules, thereby affecting spindle length, width, and integrity.

Motor protein KIFC5A interacts with Nubp1 and Nubp2, and is implicated in the regulation of centrosome duplication

Inhibition of motor protein activity has been linked with defects in the formation of poles in the spindle of dividing cells. However, the molecular mechanisms underlying the functional relationship between motor activity and centrosome dynamics have remained uncharacterised. Here, we characterise KIFC5A, a mouse kinesin-like protein that is highly expressed in dividing cells and tissues, and is subject to developmental and cell-type-specific regulation. KIFC5A is a minus-end-directed, microtubule-dependent motor that produces velocities of up to 1.26 μm minute-1 in gliding assays and possesses microtubule bundling activity. It is nuclear in interphase, localises to the centre of the two microtubule asters at the beginning of mitosis, and to spindle microtubules in later mitotic phases. Overexpression of KIFC5A in mouse cells causes the formation of aberrant, non-separated microtubule asters and mitotic arrest in a prometaphase-like state. KIFC5A knockdown partly rescues the phenotype caused by inhibition of plus-end-directed motor Eg5 by monastrol on the mitotic spindle, indicating that it is involved in the balance of forces determining bipolar spindle assembly and integrity. Silencing of KIFC5A also results in centrosome amplification detectable throughout the cell cycle. Supernumerary centrosomes arise primarily as a result of reduplication and partly as a result of cytokinesis defects. They contain duplicated centrioles and have the ability to organise microtubule asters, resulting in the formation of multipolar spindles. We show that KIFC5A interacts with nucleotide-binding proteins 1 and 2 (Nubp1 and Nubp2), which have extensive sequence similarity to prokaryotic division-site-determining protein MinD. Nubp1 and Nubp2 also interact with each other. Knockdown of Nubp1 or double knockdown of Nubp1 and Nubp2 (Nubp1&Nubp2) both phenocopy the KIFC5A silencing effect. These results implicate KIFC5A and the Nubp proteins in a common regulatory pathway involved in the control of centrosome duplication in mammalian cells.

Mechanisms for focusing mitotic spindle poles by minus end-directed motor proteins

During the formation of the metaphase spindle in animal somatic cells, kinetochore microtubule bundles (K fibers) are often disconnected from centrosomes, because they are released from centrosomes or directly generated from chromosomes. To create the tightly focused, diamond-shaped appearance of the bipolar spindle, K fibers need to be interconnected with centrosomal microtubules (C-MTs) by minus end–directed motor proteins. Here, we have characterized the roles of two minus end–directed motors, dynein and Ncd, in such processes in Drosophila S2 cells using RNA interference and high resolution microscopy. Even though these two motors have overlapping functions, we show that Ncd is primarily responsible for focusing K fibers, whereas dynein has a dominant function in transporting K fibers to the centrosomes. We also report a novel localization of Ncd to the growing tips of C-MTs, which we show is mediated by the plus end–tracking protein, EB1. Computer modeling of the K fiber focusing process suggests that the plus end localization of Ncd could facilitate the capture and transport of K fibers along C-MTs. From these results and simulations, we propose a model on how two minus end–directed motors cooperate to ensure spindle pole coalescence during mitosis.

Cell cycle-dependent dynamics and regulation of mitotic kinesins in Drosophila S2 cells

Constructing a mitotic spindle requires the coordinated actions of several kinesin motor proteins. Here, we have visualized the dynamics of five green fluorescent protein (GFP)-tagged mitotic kinesins (class 5, 6, 8, 13, and 14) in live Drosophila Schneider cell line (S2), after first demonstrating that the GFP-tag does not interfere with the mitotic functions of these kinesins using an RNA interference (RNAi)-based rescue strategy. Class 8 (Klp67A) and class 14 (Ncd) kinesin are sequestered in an active form in the nucleus during interphase and engage their microtubule targets upon nuclear envelope breakdown (NEB). Relocalization of Klp67A to the cytoplasm using a nuclear export signal resulted in the disassembly of the interphase microtubule array, providing support for the hypothesis that this kinesin class possesses microtubule-destabilizing activity. The interactions of Kinesin-5 (Klp61F) and -6 (Pavarotti) with microtubules, on the other hand, are activated and inactivated by Cdc2 phosphorylation, respectively, as shown by examining localization after mutating Cdc2 consensus sites. The actions of microtubule-destabilizing kinesins (class 8 and 13 [Klp10A]) seem to be controlled by cell cycle-dependent changes in their localizations. Klp10A, concentrated on microtubule plus ends in interphase and prophase, relocalizes to centromeres and spindle poles upon NEB and remains at these sites throughout anaphase. Consistent with this localization, RNAi analysis showed that this kinesin contributes to chromosome-to-pole movement during anaphase A. Klp67A also becomes kinetochore associated upon NEB, but the majority of the population relocalizes to the central spindle by the timing of anaphase A onset, consistent with our RNAi result showing no effect of depleting this motor on anaphase A. These results reveal a diverse spectrum of regulatory mechanisms for controlling the localization and function of five mitotic kinesins at different stages of the cell cycle.

Comparative analysis of two C-terminal kinesin motor proteins: KIFC1 and KIFC5A

We have taken advantage of the close structural relationship between two C-terminal motors, KIFC5A and KIFC1, to examine the sequence requirements for targeting of these two motors within the cell. Although KIFC5A and KIFC1 are almost identical in their motor and stalk domains, they differ in well-defined regions of their tail domains. Specific antisera to these motors were used to determine their localization to distinct subcellular compartments, the spindle for KIFC5A or membranous organelles for KIFC1. In addition to defining the intracellular localization of KIFC1, the reactivity of the KIFC1 antibody demonstrates that this motor contains a frame shift with respect to KIFC5A and is likely the product of a separate gene. The divergent tail domains of these motors are predicted to harbor specific information that directs them to their correct intracellular targets. In order to define the sequences responsible for the differential localization of these two motors, GFP was fused to motors with various tail deletions and their localization visualized after transfection. We were able to identify distinct sequences in each motor responsible for its unique cellular localization. The KIFC5A tail contains a 43 amino acid sequence with both nuclear localization and microtubule binding activity while KIFC1 contains a 19 amino acid sequence sufficient to target this motor to membrane-bounded organelles.

G protein control of microtubule assembly

Microtubules are dynamic polymers required for many aspects of eukaryotic cell function. The interphase microtubule network is essential for intracellular transport, organization, and cell polarization, whereas the mitotic spindle is required for chromosome segregation and cell division. Studies in different areas such as cell migration, mitosis, and asymmetric cell division have shown that Ran, Rho, and heterotrimeric G proteins regulate many aspects of microtubule functions. This review surveys how G protein-signaling coordinates microtubule polymerization and organization with specific cellular activities.

A minus-end-directed kinesin with plus-end tracking protein activity is involved in spindle morphogenesis

Diverse kinesin motor proteins are involved in spindle function; however, the mechanisms by which they are targeted to specific sites within spindles are not well understood. Here, we show that a fusion between yellow fluorescent protein (YFP) and a minus-end-directed Kinesin-14 (C-terminal family) from Arabidopsis, ATK5, localizes to mitotic spindle midzones and regions rich in growing plus-ends within phragmoplasts. Notably, in Arabidopsis interphase cells, YFP::ATK5 localizes to microtubules with a preferential enrichment at growing plus-ends; indicating ATK5 is a plus-end tracking protein (+TIP). This +TIP activity is conferred by regions outside of the C-terminal motor domain, which reveals the presence of independent plus-end tracking and minus-end motor activities within ATK5. Furthermore, mitotic spindles of atk5 null mutant plants are abnormally broadened. Based on these data, we propose a model in which ATK5 uses plus-end tracking to reach spindle midzones, where it then organizes microtubules via minus-end-directed motor activity.

Microtubule-associated proteins and their essential roles during mitosis

Microtubules play essential roles during mitosis, including chromosome capture, congression, and segregation. In addition, microtubules are also required for successful cytokinesis. At the heart of these processes is the ability of microtubules to do work, a property that derives from their intrinsic dynamic behavior. However, if microtubule dynamics were not properly regulated, it is certain that microtubules alone could not accomplish any of these tasks. In vivo, the regulation of microtubule dynamics is the responsibility of microtubule-associated proteins. Among these, we can distinguish several classes according to their function: (1) promotion and stabilization of microtubule polymerization, (2) destabilization or severance of microtubules, (3) functioning as linkers between various structures, or (4) motility-related functions. Here we discuss how the various properties of microtubule-associated proteins can be used to assemble an efficient mitotic apparatus capable of ensuring the bona fide transmission of the genetic information in animal cells.

The mechanism of spindle assembly: functions of Ran and its target TPX2

Recent work has provided new insights into the mechanism of spindle assembly. Growing evidence supports a model in which the small GTPase Ran plays a central role in this process. Here, we examine the evidence for the existence of a RanGTP gradient around mitotic chromosomes and some controversial data on the role that chromosomes play in spindle assembly. We review the current knowledge on the Ran downstream targets for spindle assembly and we focus on the multiple roles of TPX2, one of the targets of RanGTP during cell division.

Novel nuclear defects in KLP61F-deficient mutants in Drosophila are partially suppressed by loss of Ncd function

KLP61F in Drosophila and other BimC kinesins are essential for spindle bipolarity across species; loss of BimC function generates high frequencies of monopolar spindles. Concomitant loss of Kar3 kinesin function increases the frequency of bipolar spindles although the underlying mechanism is not known. Recent studies raise the question of whether BimC kinesins interact with a non-microtubule spindle matrix rather than spindle microtubules. Here we present cytological evidence that loss of KLP61F function generates novel defects during M-phase in the organization and integrity of the nuclear lamina, an integral component of the nuclear matrix. Larval neuroblasts and spermatocytes of klp61F mutants showed deep involutions in the nuclear lamina extending toward the centrally located centrosomes. Repositioning of centrosomes to form monopolar spindles probably does not cause invaginations as similar invaginations formed in spermatocytes lacking centrosomes entirely. Immunofluorescence microscopy indicated that non-claret disjunctional (Ncd) is a component of the nuclear matrix in somatic cells and spermatocytes. Loss of Ncd function increases the frequency of bipolar spindles in klp61F mutants. Nuclear defects were incompletely suppressed; micronuclei formed near telophase at the poles of bipolar spindle in klp61F ncd spermatocytes. Our results are consistent with a model in which KLP61F prevents Ncd-mediated collapse of a nonmicrotubule matrix derived from the interphase nucleus.

The AAA-ATPase Cdc48/p97 regulates spindle disassembly at the end of mitosis

Spindle disassembly at the end of mitosis is a complex and poorly understood process. Here, we report that the AAA-ATPase Cdc48/p97 and its adapters Ufd1-Npl4, which have a well-established role in membrane functions, also regulate spindle disassembly by modulating microtubule dynamics and bundling at the end of mitosis. In the absence of p97-Ufd1-Npl4 function, microtubules in Xenopus egg extracts remain as monopolar spindles attached to condensed chromosomes after Cdc2 kinase activity has returned to the interphase level. Consequently, interphase microtubule arrays and nuclei are not established. Genetic analyses of Cdc48, the yeast homolog of p97, reveal that Cdc48 is also required for disassembly of mitotic spindles after execution of the mitotic exit pathway. Furthermore, Cdc48/p97-Ufd1-Npl4 directly binds to spindle assembly factors and regulates their interaction with microtubules at the end of mitosis. Therefore, Cdc48/p97-Ufd1-Npl4 is an essential chaperone that regulates transformation of the microtubule structure as cells reenter interphase.

Cell and molecular biology of spindle poles and NuMA

Mitotic and meiotic cells contain a bipolar spindle apparatus of microtubules and associated proteins. To arrange microtubules into focused spindle poles, different mechanisms are used by various organisms. Principally, two major pathways have been characterized: nucleation and anchorage of microtubules at preexisting centers such as centrosomes or spindle pole bodies, or microtubule growth off the surface of chromosomes, followed by sorting and focusing into spindle poles. These two mechanisms can even be found in cells of the same organism: whereas most somatic animal cells utilize the centrosome as an organizing center for spindle microtubules, female meiotic cells build an acentriolar spindle apparatus. Most interestingly, the molecular components that drive acentriolar spindle pole formation are also present in cells containing centrosomes. They include microtubule-dependent motor proteins and a variety of structural proteins that regulate microtubule orientation, anchoring, and stability. The first of these spindle pole proteins, NuMA, had already been identified more than 20 years ago. In addition, several new proteins have been characterized more recently. This review discusses their role during spindle formation and their regulation in the cell cycle.

Ran modulates spindle assembly by regulating a subset of TPX2 and Kid activities including Aurora A activation

Ran, a GTPase in the Ras superfamily, is proposed to be a spatial regulator of microtubule spindle assembly by maintaining key spindle assembly factors in an active state close to chromatin. RanGTP is hypothesized to maintain the spindle assembly factors in the active state by binding to importin β, part of the nuclear transport receptor complex, thereby preventing the inhibitory binding of the nuclear transport receptors to spindle assembly factors. To directly test this hypothesis, two putative downstream targets of the Ran spindle assembly pathway, TPX2, a protein required for correct spindle assembly and Kid, a chromokinesin involved in chromosome arm orientation on the spindle, were analyzed to determine if their direct binding to nuclear transport receptors inhibited their function. In the amino-terminal domain of TPX2 we identified nuclear targeting information, microtubule-binding and Aurora A binding activities. Nuclear transport receptor binding to TPX2 inhibited Aurora A binding activity but not the microtubule-binding activity of TPX2. Inhibition of the interaction between TPX2 and Aurora A prevented Aurora A activation and recruitment to microtubules. In addition we identified nuclear targeting information in both the amino-terminal microtubule-binding domain and the carboxy-terminal DNA binding domain of Kid. However, the binding of nuclear transport receptors to Kid only inhibited the microtubule-binding activity of Kid. Therefore, by regulating a subset of TPX2 and Kid activities, Ran modulates at least two processes involved in spindle assembly.

XMAP215, XKCM1, NuMA, and cytoplasmic dynein are required for the assembly and organization of the transient microtubule array during the maturation of Xenopus oocytes

During the maturation of Xenopus oocytes, a transient microtubule array (TMA) is nucleated from a novel MTOC near the base of the germinal vesicle. The MTOC-TMA transports the meiotic chromosomes to the animal cortex, where it serves as the precursor to the first meiotic spindle. To understand more fully the assembly of the MTOC-TMA, we used confocal immunofluorescence microscopy to examine the localization and function of XMAP215, XKCM1, NuMA, and cytoplasmic dynein during oocyte maturation. XMAP215, XKCM1, and NuMA were all localized to the base of the MTOC-TMA and the meiotic spindle. Microinjection of anti-XMAP215 inhibited microtubule (MT) assembly during oocyte maturation, disrupting assembly of the MTOC-TMA and subsequent assembly of the first meiotic spindle. In contrast, microinjection of anti-XKCM1 promoted MT assembly throughout the cytoplasm, disrupting organization of the MTOC-TMA and meiotic spindle. Finally, microinjection of anti-dynein or anti-NuMA disrupted the organization of the MTOC-TMA and subsequent assembly of the meiotic spindles. These results suggest that XMAP215 and XKCM1 act antagonistically to regulate MT assembly and organization during maturation of Xenopus oocytes, and that dynein and NuMA are required for organization of the MTOC-TMA.

Importin alpha/beta and Ran-GTP regulate XCTK2 microtubule binding through a bipartite nuclear localization signal

The small GTPase Ran is essential for spindle assembly. Ran is proposed to act through its nuclear import receptors importin alpha and/or importin beta to control the sequestration of proteins necessary for spindle assembly. To date, the molecular mechanisms by which the Ran pathway functions remain unclear. Using purified proteins, we have reconstituted Ran-regulated microtubule binding of the C-terminal kinesin XCTK2, a kinesin important for spindle assembly. We show that the tail of XCTK2 binds to microtubules and that this binding is inhibited in the presence of importin alpha and beta (alpha/beta) and restored by addition of Ran-GTP. The bipartite nuclear localization signal (NLS) in the tail of XCTK2 is essential to this process, because mutation of the NLS abolishes importin alpha/beta-mediated regulation of XCTK2 microtubule binding. Our data show that importin alpha/beta directly regulates the activity of XCTK2 and that one of the molecular mechanisms of Ran-regulated spindle assembly is identical to that used in classical NLS-driven nuclear transport.

The roles of microtubule-based motor proteins in mitosis: comprehensive RNAi analysis in the Drosophila S2 cell line

Kinesins and dyneins play important roles during cell division. Using RNA interference (RNAi) to deplete individual (or combinations of) motors followed by immunofluorescence and time-lapse microscopy, we have examined the mitotic functions of cytoplasmic dynein and all 25 kinesins in Drosophila S2 cells. We show that four kinesins are involved in bipolar spindle assembly, four kinesins are involved in metaphase chromosome alignment, dynein plays a role in the metaphase-to-anaphase transition, and one kinesin is needed for cytokinesis. Functional redundancy and alternative pathways for completing mitosis were observed for many single RNAi knockdowns, and failure to complete mitosis was observed for only three kinesins. As an example, inhibition of two microtubule-depolymerizing kinesins initially produced monopolar spindles with abnormally long microtubules, but cells eventually formed bipolar spindles by an acentrosomal pole-focusing mechanism. From our phenotypic data, we construct a model for the distinct roles of molecular motors during mitosis in a single metazoan cell type.

Unconventional motoring: an overview of the Kin C and Kin I kinesins

All kinesins share a conserved core motor domain implying a common mechanism for generating force from ATP hydrolysis. How is it then that kinesins exhibit such divergent activities: motility, microtubule cross-linking and microtubule depolymerization? Although conventional motile kinesins have served as the paradigm for understanding kinesin function, the unconventional kinesins exploit variations on the motile theme to perform unexpected tasks. This review summarizes the biological functions and examines the possible molecular mechanisms of Kin C and Kin I unconventional kinesins. We also discuss the possible differences between the microtubule destabilization models proposed for Kar3 and Kin I kinesins.

Analysis of microtubule movement on isolated Xenopus egg cortices provides evidence that the cortical rotation involves dynein as well as Kinesin Related Proteins and is regulated by local microtubule polymerisation

In amphibians, the cortical rotation, a translocation of the egg cortex relative to the cytoplasm, specifies the dorsoventral axis. The cortical rotation involves an array of subcortical microtubules whose alignment is mediated by Kinesin-related proteins (KRPs), and stops as M-phase promoting factor (MPF) activation propagates across the egg. To dissect the role of different motor proteins in the cortical rotation and to analyse their regulation, we have developed an open cell assay system involving reactivation of microtubule movement on isolated cortices. Microtubule movements were dependent on ATP and consisted mainly of wriggling and flailing without net displacement, consistent with a tethering of microtubules to the cortex. Reactivated movements were inhibited by anti-KRP and anti-dynein antibodies perfused together but not separately, the KRP antibody alone becoming fixed to the cortex. Neither antibody could inhibit movement in the presence of MPF, indicating that arrest of the cortical rotation is not due to MPF-dependent inhibition of motor molecules. In contrast, D(2)O treatment of live eggs to protect microtubules from progressive depolymerisation prolonged the cortical rotation. We conclude that the cortical rotation probably involves cytoplasmic dynein as well as cortical KRPs and terminates as a result of local MPF-dependent microtubule depolymerisation.

The microtubule-destabilizing kinesin XKCM1 regulates microtubule dynamic instability in cells

The dynamic activities of cellular microtubules (MTs) are tightly regulated by a balance between MT-stabilizing and -destabilizing proteins. Studies in Xenopus egg extracts have shown that the major MT destabilizer during interphase and mitosis is the kinesin-related protein XKCM1, which depolymerizes MT ends in an ATP-dependent manner. Herein, we examine the effects of both overexpression and inhibition of XKCM1 on the regulation of MT dynamics in vertebrate somatic cells. We found that XKCM1 is a MT-destabilizing enzyme in PtK2 cells and that XKCM1 modulates cellular MT dynamics. Our results indicate that perturbation of XKCM1 levels alters the catastrophe frequency and the rescue frequency of cellular MTs. In addition, we found that overexpression of XKCM1 or inhibition of KCM1 during mitosis leads to the formation of aberrant spindles and a mitotic delay. The predominant spindle defects from excess XKCM1 included monoastral and monopolar spindles, as well as small prometaphase-like spindles with improper chromosomal attachments. Inhibition of KCM1 during mitosis led to prometaphase spindles with excessively long MTs and spindles with partially separated poles and a radial MT array. These results show that KCM1 plays a critical role in regulating both interphase and mitotic MT dynamics in mammalian cells.

Purification and characterization of native conventional kinesin, HSET, and CENP-E from mitotic hela cells

We have developed a strategy for the purification of native microtubule motor proteins from mitotic HeLa cells and describe here the purification and characterization of human conventional kinesin and two human kinesin-related proteins, HSET and CENP-E. We found that the 120-kDa HeLa cell conventional kinesin is an active motor that induces microtubule gliding at approximately 30 microm/min at room temperature. This active form of HeLa cell kinesin does not contain light chains, although light chains were detected in other fractions. HSET, a member of the C-terminal kinesin subfamily, was also purified in native form for the first time, and the protein migrates as a single band at approximately 75 kDa. The purified HSET is an active motor that induces microtubule gliding at a rate of approximately 5 microm/min, and microtubules glide for an average of 3 microm before ceasing movement. Finally, we purified native CENP-E, a kinesin-related protein that has been implicated in chromosome congression during mitosis, and we found that this form of CENP-E does not induce microtubule gliding but is able to bind to microtubules.

Molecular motors and their functions in plants

Molecular motors that hydrolyze ATP and use the derived energy to generate force are involved in a variety of diverse cellular functions. Genetic, biochemical, and cellular localization data have implicated motors in a variety of functions such as vesicle and organelle transport, cytoskeleton dynamics, morphogenesis, polarized growth, cell movements, spindle formation, chromosome movement, nuclear fusion, and signal transduction. In non-plant systems three families of molecular motors (kinesins, dyneins, and myosins) have been well characterized. These motors use microtubules (in the case of kinesines and dyneins) or actin filaments (in the case of myosins) as tracks to transport cargo materials intracellularly. During the last decade tremendous progress has been made in understanding the structure and function of various motors in animals. These studies are yielding interesting insights into the functions of molecular motors and the origin of different families of motors. Furthermore, the paradigm that motors bind cargo and move along cytoskeletal tracks does not explain the functions of some of the motors. Relatively little is known about the molecular motors and their roles in plants. In recent years, by using biochemical, cell biological, molecular, and genetic approaches a few molecular motors have been isolated and characterized from plants. These studies indicate that some of the motors in plants have novel features and regulatory mechanisms. The role of molecular motors in plant cell division, cell expansion, cytoplasmic streaming, cell-to-cell communication, membrane trafficking, and morphogenesis is beginning to be understood. Analyses of the Arabidopsis genome sequence database (51% of genome) with conserved motor domains of kinesin and myosin families indicates the presence of a large number (about 40) of molecular motors and the functions of many of these motors remain to be discovered. It is likely that many more motors with novel regulatory mechanisms that perform plant-specific functions are yet to be discovered. Although the identification of motors in plants, especially in Arabidopsis, is progressing at a rapid pace because of the ongoing plant genome sequencing projects, only a few plant motors have been characterized in any detail. Elucidation of function and regulation of this multitude of motors in a given species is going to be a challenging and exciting area of research in plant cell biology. Structural features of some plant motors suggest calcium, through calmodulin, is likely to play a key role in regulating the function of both microtubule- and actin-based motors in plants.

Ran stimulates spindle assembly by altering microtubule dynamics and the balance of motor activities

The guanosine tri-phosphatase Ran stimulates assembly of microtubule spindles. However, it is not known what aspects of the microtubule cytoskeleton are subject to regulation by Ran in mitosis. Here we show that Ran-GTP stimulates microtubule assembly by increasing the rescue frequency of microtubules three- to eightfold. In addition to changing microtubule dynamics, Ran-GTP also alters the balance of motor activities, partly as a result of an increase in the amount of motile Eg5, a plus-end-directed microtubule motor that is essential for spindle formation. Thus, Ran regulates multiple processes that are involved in spindle assembly.

Spindle assembly in animal cells

Chromosome segregation during mitosis and meiosis is driven by a complex superstructure called the spindle. Microtubules are the primary structural component of spindles, and spindle assembly and function are intimately linked to the intrinsic dynamics of microtubules. This review summarizes spindle structure and highlights recent findings regarding the mechanisms and molecules involved in organizing microtubules into spindles. In addition, mechanisms for chromosome movement and segregation are discussed.

Chromosome movement in mitosis requires microtubule anchorage at spindle poles

Anchorage of microtubule minus ends at spindle poles has been proposed to bear the load of poleward forces exerted by kinetochore-associated motors so that chromosomes move toward the poles rather than the poles toward the chromosomes. To test this hypothesis, we monitored chromosome movement during mitosis after perturbation of nuclear mitotic apparatus protein (NuMA) and the human homologue of the KIN C motor family (HSET), two noncentrosomal proteins involved in spindle pole organization in animal cells. Perturbation of NuMA alone disrupts spindle pole organization and delays anaphase onset, but does not alter the velocity of oscillatory chromosome movement in prometaphase. Perturbation of HSET alone increases the duration of prometaphase, but does not alter the velocity of chromosome movement in prometaphase or anaphase. In contrast, simultaneous perturbation of both HSET and NuMA severely suppresses directed chromosome movement in prometaphase. Chromosomes coalesce near the center of these cells on bi-oriented spindles that lack organized poles. Immunofluorescence and electron microscopy verify microtubule attachment to sister kinetochores, but this attachment fails to generate proper tension across sister kinetochores. These results demonstrate that anchorage of microtubule minus ends at spindle poles mediated by overlapping mechanisms involving both NuMA and HSET is essential for chromosome movement during mitosis.

Molecular cloning and functional analysis of mouse C-terminal kinesin motor KifC3

Proteins of the kinesin superfamily define a class of microtubule-dependent motors that play crucial roles in cell division and intracellular transport. To study the molecular mechanism of intracellular transport involving microtubule-dependent motors, a cDNA encoding a new kinesin-like protein called KifC3 was cloned from a mouse brain cDNA library. Sequence and secondary structure analysis revealed that KifC3 is a member of the C-terminal motor family. In contrast to other mouse C-terminal motors, KifC3 is apparently ubiquitous and may have a general role in intracellular transport. To understand the in vivo function of the KifC3 gene, we used homologous recombination in embryonic stem cells to construct knockout mouse strains for the KifC3 gene. Homozygous mutants of the KifC3 gene are viable, reproduce normally, and apparently develop normally. These results suggest that KifC3 is dispensable for normal development and reproduction in the mouse.

Role of importin-beta in coupling Ran to downstream targets in microtubule assembly

The guanosine triphosphatase Ran stimulates assembly of microtubule asters and spindles in mitotic Xenopus egg extracts. A carboxyl-terminal region of the nuclear-mitotic apparatus protein (NuMA), a nuclear protein required for organizing mitotic spindle poles, mimics Ran's ability to induce asters. This NuMA fragment also specifically interacted with the nuclear transport factor, importin-beta. We show that importin-beta is an inhibitor of microtubule aster assembly in Xenopus egg extracts and that Ran regulates the interaction between importin-beta and NuMA. Importin-beta therefore links NuMA to regulation by Ran. This suggests that similar mechanisms regulate nuclear import during interphase and spindle assembly during mitosis.

Importin beta is a mitotic target of the small GTPase Ran in spindle assembly

The GTPase Ran has recently been shown to stimulate microtubule polymerization in mitotic extracts, but its mode of action is not understood. Here we show that the mitotic role of Ran is largely mediated by the nuclear transport factor importin beta. Importin beta inhibits spindle formation in vitro and in vivo and sequesters an aster promoting activity (APA) that consists of multiple, independent factors. One component of APA is the microtubule-associated protein NuMA. NuMA and other APA components are discharged from importin beta by RanGTP and induce spindle-like structures in the absence of centrosomes, chromatin, or Ran. We propose that RanGTP functions in mitosis as in interphase by locally releasing cargoes from transport factors. In mitosis, this promotes spindle assembly by organizing microtubules in the vicinity of chromosomes.

Tea2p is a kinesin-like protein required to generate polarized growth in fission yeast

Cytoplasmic microtubules are critical for establishing and maintaining cell shape and polarity. Our investigations of kinesin-like proteins (klps) and morphological mutants in the fission yeast Schizosaccharomyces pombe have identified a kinesin-like gene, tea2(+), that is required for cells to generate proper polarized growth. Cells deleted for this gene are often bent during exponential growth and initiate growth from improper sites as they exit stationary phase. They have a reduced cytoplasmic microtubule network and display severe morphological defects in genetic backgrounds that produce long cells. The tip-specific marker, Tea1p, is mislocalized in both tea2-1 and tea2Delta cells, indicating that Tea2p function is necessary for proper localization of Tea1p. Tea2p is localized to the tips of the cell and in a punctate pattern within the cell, often coincident with the ends of cytoplasmic microtubules. These results suggest that this kinesin promotes microtubule growth, possibly through interactions with the microtubule end, and that it is important for establishing and maintaining polarized growth along the long axis of the cell.

The Xenopus chromokinesin Xkid is essential for metaphase chromosome alignment and must be degraded to allow anaphase chromosome movement

At anaphase, the linkage betweeh sister chromatids is dissolved and the separated sisters move toward opposite poles of the spindle. We developed a method to purify metaphase and anaphase chromosomes from frog egg extracts and identified proteins that leave chromosomes at anaphase using a new form of expression screening. This approach identified Xkid, a Xenopus homolog of human Kid (kinesin-like DNA binding protein) as a protein that is degraded in anaphase by ubiquitin-mediated proteolysis. Immunodepleting Xkid from egg extracts prevented normal chromosome alignment on the metaphase spindle. Adding a mild excess of wild-type or nondegradable Xkid to egg extracts prevented the separated chromosomes from moving toward the poles. We propose that Xkid provides the metaphase force that pushes chromosome arms toward the equator of the spindle and that its destruction is needed for anaphase chromosome movement.

Local inhibition of cortical rotation in Xenopus eggs by an anti-KRP antibody

The dorsal-ventral axis of amphibian embryos is specified by the "cortical rotation," a translocation of the egg cortex relative to the vegetal yolk mass. The mechanism of cortical rotation is not understood but is thought to involve an array of aligned, commonly oriented microtubules. We have demonstrated an essential requirement for kinesin-related proteins (KRPs) in the cortical rotation by microinjection beneath the vegetal cortex of an antipeptide antibody recognising multiple Xenopus egg KRPs. Time-lapse videomicroscopy revealed a striking local inhibition of the cortical rotation around the injection site, indicating that KRP-mediated translocation of the cortex is generated by forces acting across the vegetal subcortical region. Anti-tubulin immunofluorescence showed that the antibody disrupted both formation and maintenance of the aligned microtubule array. Direct examination of rhodamine-labelled microtubules by confocal microscopy showed that the anti-KRP antibody provoked striking three-dimensional flailing movement of the subcortical microtubules. In contrast, microtubules in antibody-free regions undulated only within the plane of the cortex, a significant population exhibiting little or no net movement. These findings suggest that KRPs have a critical role during cortical rotation in tethering microtubules to the cortex and that they may not contribute significantly to the translocation force as previously thought.

The Xenopus laevis aurora/Ip11p-related kinase pEg2 participates in the stability of the bipolar mitotic spindle

The Xenopus laevis aurora/Ip11p-related kinase pEg2 is required for centrosome separation, which is a prerequisite for bipolar mitotic spindle formation. Here, we report that the inhibition of pEg2 by addition of either an inactive kinase or a monoclonal antibody destabilizes bipolar spindles previously assembled in Xenopus egg extracts. The bipolar spindles collapse to form structures such as microtubule asters with chromosome rosettes, monopolar spindles, and multipolar spindles. In collapsed spindles, chromosomes remain attached to the microtubules plus ends. The destabilization of the bipolar spindle is reminiscent of the destabilization observed after inhibition of cross-linking activities which maintain parallel and anti-parallel microtubules linked together. We have previously reported that pEg2 phosphorylates the kinesin-related protein XlEg5 which is involved in centrosome separation but which was also reported to be involved in spindle stability. The collapse of the bipolar spindle observed after inhibition of pEg2 suggests that the kinase might regulate the cross-linking activity of XlEg5. We do not exclude the possibility that pEg2 also regulates other microtubule-based motor proteins involved in bipolar spindle stability. To our knowledge, this is the first evidence that aurora/Ip11p-related kinase activity actually participates not only in mitotic spindle formation by regulating centrosome separation but also in mitotic spindle stabilization.

TPX2, A novel xenopus MAP involved in spindle pole organization

TPX2, the targeting protein for Xenopus kinesin-like protein 2 (Xklp2), was identified as a microtubule-associated protein that mediates the binding of the COOH-terminal domain of Xklp2 to microtubules (Wittmann, T., H. Boleti, C. Antony, E. Karsenti, and I. Vernos. 1998. J. Cell Biol. 143:673-685). Here, we report the cloning and functional characterization of Xenopus TPX2. TPX2 is a novel, basic 82.4-kD protein that is phosphorylated during mitosis in a microtubule-dependent way. TPX2 is nuclear during interphase and becomes localized to spindle poles in mitosis. Spindle pole localization of TPX2 requires the activity of the dynein-dynactin complex. In late anaphase TPX2 becomes relocalized from the spindle poles to the midbody. TPX2 is highly homologous to a human protein of unknown function and thus defines a new family of vertebrate spindle pole components. We investigated the function of TPX2 using spindle assembly in Xenopus egg extracts. Immunodepletion of TPX2 from mitotic egg extracts resulted in bipolar structures with disintegrating poles and a decreased microtubule density. Addition of an excess of TPX2 to spindle assembly reactions gave rise to monopolar structures with abnormally enlarged poles. We conclude that, in addition to its function in targeting Xklp2 to microtubule minus ends during mitosis, TPX2 also participates in the organization of spindle poles.

Characterization of gamma-tubulin in Artemia: isoform composition and spatial distribution in polarized cells of the larval epidermis

Microtubule arrangement is influenced by gamma-tubulin, a soluble protein of the eukaryotic cell cytosol and a component of microtubule-organizing centers. In this study, affinity purified antibodies to gamma-tubulin were prepared and their specificity demonstrated by immunostaining of Western blots and in competitive ELISAs. When employed to label mouse fibroblasts, one or two brightly stained dots appeared in each cell, a pattern characteristic of centrosomes. Antibody 9, raised to a conserved amino-terminal peptide of gamma-tubulin, was used with TU-30 (from P. Dráber) to characterize gamma-tubulin in the crustacean, Artemia franciscana. Cell-free protein extracts from Artemia contained gamma-tubulin and it purified with alpha/beta-tubulin through several preparative steps. Probing of Western blots prepared from two-dimensional gels yielded a single isoform of gamma-tubulin in Artemia with a pI of about 5.6. Immunostaining with TAT, a general antibody to alpha-tubulin, demonstrated that Artemia possess two morphological types of immune blood cells (hemocytes) with distinctive microtubule arrays. Both the compact spherical hemocytes and the flatter, spreading cells exhibited fluorescent dots, often in pairs, when labelled with antibodies to gamma-tubulin. Microtubules in polarized cells of the epidermis were also brightly stained with antibody to alpha-tubulin, revealing interphase arrangements, anastral mitotic spindles and midbodies. Antibody 9 and TU-30 gave punctate staining patterns in interphase epidermal cell layers and they occasionally labelled midbodies. Unexpectedly, gamma-tubulin was seen only rarely at both poles of mitotic spindles in epidermal cells. The complete absence of asters and the apparent lack of gamma-tubulin at all but a small number of poles indicate that formation and structure of the mitotic spindle in epidermal cells of Artemia are unusual.

Characterization of a C-terminal-type kinesin-related protein from Dictyostelium discoideum

We have determined the full sequence of K2, a kinesin-related protein (KRP) in Dictyostelium discoideum. Sequence homology and domain organization placed K2 in the ncd/Kar3 subfamily of the C-terminal-type KRPs. Bacterially expressed, truncated K2 showed ATP-dependent binding to microtubules and microtubule-stimulated ATPase activity. K2-null cells grew and developed normally, suggesting overlapping functions of K2 with other microtubule motor(s). Overexpression of K2 caused partial mitotic arrest. Green fluorescent protein-tagged full-length K2 localized in the nucleus at the interphase and on the mitotic spindle during mitosis. These results suggest that K2 is a microtubule-dependent motor which may play some roles in mitotic spindles.

NuMA: a nuclear protein involved in mitotic centrosome function

Nuclear mitotic apparatus protein, NuMA, is an abundant 240 kDa protein with microtubule (MT) binding capacity via its carboxyl terminal region. Structurally, it has been shown to be a double-strand coiled-coil that has a high potential to form filamentous polymers. During interphase, NuMA locates within the nucleus but rapidly redistributes to the separating centrosomes during early mitosis. Xenopus NuMA associates with MT minus end-directed motor cytoplasmic dynein and its motility-activating complex dynactin at mitotic centrosomal regions. This NuMA-motor complex binds the free ends of MTs, converging and tethering spindle MT ends to the poles. A similar scenario appears to be true in higher vertebrates as well. As a mitotic centrosomal component, NuMA is essential for the organization and stabilization of spindle poles from early mitosis until at least the onset of anaphase. The cell cycle-dependent distribution and function of NuMA is regulated by phosphorylation and dephosphorylation, and p34/CDC2 activity is important to the mitotic role of NuMA. This review summarizes data about the structural features and mitotic function of NuMA with particular emphasis on the newly discovered NuMA-motor complex in spindle organization. Furthermore, NuMA may represent a large group of proteins whose mitotic function is sequestered in the nucleus during interphase.

Identification of seven genes in the major histocompatibility complex class I region of the zebrafish

Physical linkage of genes whose products are involved in similar physiological pathways may have functional significance. The identification of conserved gene linkage in distantly related organisms can therefore strengthen the hypothesis of selection acting towards keeping genes on a chromosome. We used the cDNA selection technique and the polymerase chain reaction (PCR) with generic primers for the identification of new genes on the genomic clones bearing the major histocompatibility complex (Mhc) class I genes of the zebrafish (Danio rerio). We found six new genes (BING1, DAXX, TAPBP, KNSL2, TAP2B and KE6) whose orthologues are known to be linked to the Mhc class II region in humans and mice. In addition, a new zebrafish Mhc class I gene, termed Dare-UFA, was detected. By contrast, a search for the human leucocyte antigen (HLA)-linked BING3, KE3 and SACM2L genes revealed that these loci are not located on the class I clones of the zebrafish. The zebrafish class I region contains repetitive elements with similarity to the DANA, SATA and LINE repeats, as well as Tc1 transposable elements. Our findings indicate a high degree of linkage conservation between the zebrafish class I and the mammalian class II regions.

The kinesin-like calmodulin binding protein is differentially involved in cell division

The kinesin-like calmodulin (CaM) binding protein (KCBP), a minus end-directed microtubule motor protein unique to plants, has been implicated in cell division. KCBP is negatively regulated by Ca(2)+ and CaM, and antibodies raised against the CaM binding region inhibit CaM binding to KCBP in vitro; therefore, these antibodies can be used to activate KCBP constitutively. Injection of these antibodies into Tradescantia virginiana stamen hair cells during late prophase induces breakdown of the nuclear envelope within 2 to 10 min and leads the cell into prometaphase. However, mitosis is arrested, and the cell does not progress into anaphase. Injection of antibodies later during cell division has no effect on anaphase transition but causes aberrant phragmoplast formation and delays the completion of cytokinesis by approximately 15 min. These effects are achieved without any apparent degradation of the microtubule cytoskeleton. We propose that during nuclear envelope breakdown and anaphase, activated KCBP promotes the formation of a converging bipolar spindle by sliding and bundling microtubules. During metaphase and telophase, we suggest that its activity is downregulated.