Structure of L-A virus: a specialized compartment for the transcription and replication of double-stranded RNA

The birnavirus crystal structure reveals structural relationships among icosahedral viruses

Double-stranded RNA virions are transcriptionally competent icosahedral particles that must translocate across a lipid bilayer to function within the cytoplasm of the target cell. Birnaviruses are unique among dsRNA viruses as they have a single T = 13 icosahedral shell, lacking the characteristic inner capsid observed in the others. We determined the crystal structures of the T = 1 subviral particle (260 angstroms in diameter) and of the T = 13 intact virus particle (700 angstroms in diameter) of an avian birnavirus to 3 angstroms and 7 angstroms resolution, respectively. Our results show that VP2, the only component of the virus icosahedral capsid, is homologous both to the capsid protein of positive-strand RNA viruses, like the T = 3 nodaviruses, and to the T = 13 capsid protein of members of the Reoviridae family of dsRNA viruses. Together, these results provide important insights into the multiple functions of the birnavirus capsid and reveal unexpected structural relationships among icosahedral viruses.

The bipartite 3'-cis-acting signal for replication is required for formation of a ribonucleoprotein complex in vivo between the viral genome and its RNA polymerase in yeast 23 S RNA virus

23 S RNA narnavirus is a persistent positive strand RNA virus found in Saccharomyces cerevisiae. The viral genome (2.9 kb) encodes only its RNA-dependent RNA polymerase, p104, and forms a ribonucleoprotein complex with p104 in vivo. Previously we succeeded in generating 23 S RNA virus in yeast from an expression vector containing the entire viral cDNA sequence. Using this system, we have recently identified a bipartite 3' cis-acting signal for replication. The signal consists of a stretch of four cytidines (Cs) at the 3' end and a mismatched pair of purines in a stem-loop structure that partially overlaps the terminal four Cs. Although the 3' terminal and penultimate Cs are not essential for virus launching, the generated viruses efficiently recovered these terminal nucleotides. In this work, we expressed RNA transcripts containing the entire 23 S RNA genome but incapable of generating the virus because of the presence of non-viral extra sequences at the 3' ends. These transcripts could form complexes with p104 in vivo, and a detailed analysis indicated that the mismatched pair of purines as well as the third and fourth Cs from the viral 3' end was essential for this complex-forming activity. Given that 23 S RNA virus does not have genes for capsid proteins, the binding of p104 to the viral 3' end, in addition to the efficient 3' terminal repair, may play a crucial role in virus persistence by protecting and maintaining the correct viral 3' end in vivo.

Emerging themes in rotavirus cell entry, genome organization, transcription and replication

Rotaviruses, causative agents of gastroenteritis in young animals and humans, are large icosahedral viruses with a complex architecture. The double-stranded RNA (dsRNA) genome composed of 11 segments, which codes for 6 structural and 6 non-structural proteins, is enclosed within three concentric capsid layers. In addition to facilitating host-specific interactions, the design of the capsid architecture in rotaviruses as in other dsRNA viruses should also be conducive to the requirement of transcribing the enclosed genome segments repeatedly and simultaneously within the capsid interior. Several non-structural proteins facilitate the subsequent processes of genome replication and packaging. Electron cryomicroscopy studies of intact virions, recombinant virus-like particles, functional complexes, together with recent X-ray crystallographic studies on rotavirus proteins have provided structural insights into the capsid architecture, genome organization, antibody interaction, cell entry, trypsin-enhanced infectivity, endogenous transcription and replication. These studies underscore contrasting features and unifying themes between rotavirus and other dsRNA viruses.

A tiling approach to virus capsid assembly explaining a structural puzzle in virology

A novel approach for the description of the protein stoichiometry of viral capsids, that is the protein shells protecting the viral genome, is introduced based on tiling theory. This approach generalizes Caspar-Klug theory of quasi-equivalence to account also for non-quasi-equivalent subunit arrangements in icosahedral virus capsids that have been observed experimentally but are not covered by the Caspar-Klug approach. In particular, the new approach is used to explain the structure of polyoma virus, Simian Virus 40 and L-A virus capsids, which are considered structural puzzles in view of Caspar-Klug theory.

Ded1p, a conserved DExD/H-box translation factor, can promote yeast L-A virus negative-strand RNA synthesis in vitro

Viruses are intracellular parasites that must use the host machinery to multiply. Identification of the host factors that perform essential functions in viral replication is thus of crucial importance to the understanding of virus-host interactions. Here we describe Ded1p, a highly conserved DExD/H-box translation factor, as a possible host factor recruited by the yeast L-A double-stranded RNA (dsRNA) virus. We found that Ded1p interacts specifically and strongly with Gag, the L-A virus coat protein. Further analysis revealed that Ded1p interacts with the L-A virus in an RNA-independent manner and, as a result, L-A particles can be affinity purified via this interaction. The affinity-purified L-A particles are functional, as they are capable of synthesizing RNA in vitro. Critically, using purified L-A particles, we demonstrated that Ded1p specifically promotes L-A dsRNA replication by accelerating the rate of negative-strand RNA synthesis in vitro. In light of these data, we suggest that Ded1p may be a part of the long sought after activity shown to promote yeast viral dsRNA replication. This and the fact that Ded1p is also required for translating brome mosaic virus RNA2 in yeast thus raise the intriguing possibility that Ded1p is one of the key host factors favored by several evolutionarily related RNA viruses, including the human hepatitis C virus.

The bluetongue virus core: a nano-scale transcription machine

The replication phase of the bluetongue virus (BTV) infection cycle is initiated when the virus core is delivered into the cytoplasm of a susceptible host cell. The 10 segments of the viral genome remain packaged within the core throughout the replication cycle, helping to prevent the activation of host defence mechanisms that would be caused by direct contact between the dsRNA and the host cell cytoplasm. However, the BTV core is a biochemically active 'nano-scale' machine, which can simultaneously and repeatedly transcribe mRNA from each of the 10 genome segments, which are packaged as a liquid crystal array within a central cavity. These mRNAs, which are also capped and methylated within the core, are extruded into the cytoplasm through pores at the vertices of the icosahedral structure, where they are translated into viral proteins. One copy of each of the viral mRNAs is also assembled with these newly synthesised proteins to form nascent virus particles, which mature by a process that involves -ve RNA strand synthesis on the +ve stand template, thereby reforming dsRNA genome segments within progeny virus cores. The structure of the BTV core particle has been determined to atomic resolution by X-ray crystallography, revealing the organisation and interactions of its major protein components (VP3(T2)-subcore shell and VP7(T13) outer core layer) and important features of the packaged dsRNA. By soaking crystals of BTV cores with metal ions and substrates/products of the transcription reactions prior to analysis by X-ray crystallography, then constructing difference maps, it has been possible to identify binding sites and entry/exit routes for these ions, substrates and products. This has revealed how BTV solves the many logistical problems of multiple and simultaneous transcription from the 10 genome segments within the confined space of the core particle. The crystal structure of the BTV core has also revealed an outer surface festooned with dsRNA. This may represent a further protective strategy adopted by the virus to prevent host cell shut-off, by sequestering any dsRNA that may be released from damaged particles.

The coat protein of Rabbit hemorrhagic disease virus contains a molecular switch at the N-terminal region facing the inner surface of the capsid

To function adequately, many if not all proteins involved in macromolecular assemblies show conformational polymorphism as an intrinsic feature. This general strategy has been described for many essential cellular processes. Here we describe this structural polymorphism in a viral protein, the coat protein of Rabbit hemorrhagic disease virus (RHDV), which is required during virus capsid assembly. By combining genetic, structure modeling, and cryo-electron microscopy and image processing analysis, we have established the mechanism that allows RHDV coat protein to switch among quasi-equivalent conformational states to achieve the appropriate curvature for the formation of a closed shell. The RHDV capsid structure is based on a T = 3 lattice, containing 180 copies of identical subunits, similar to those of other caliciviruses. The quasi-equivalent interactions between the coat proteins are achieved by the N-terminal region of a subset of subunits, which faces the inner surface of the capsid shell. Mutant coat protein lacking this N-terminal sequence assembles into T = 1 capsids. Our results suggest that the polymorphism of the RHDV T = 3 capsid might bear resemblance to that of plant virus T = 3 capsids.

Three-dimensional structure of penicillium chrysogenum virus: a double-stranded RNA virus with a genuine T=1 capsid

Although double-stranded (ds) RNA viruses are a rather diverse group, they share general architectural principles and numerous functional features. All dsRNA viruses, from the mammalian reoviruses to the bacteriophage phi6, including fungal viruses, share a specialized capsid involved in transcription and replication of the dsRNA genome, and release of the viral plus strand RNA. This ubiquitous capsid consists of 120 protein subunits in a so-called T=2 organization. The stringent requirements of dsRNA metabolism may explain the similarities observed in capsid architecture among a broad spectrum of dsRNA viruses. We have used cryo-electron microscopy combined with three-dimensional reconstruction techniques and complementary biophysical techniques, to determine the structure at 26A resolution of the Penicillium chrysogenum virus (PcV) capsid. In contrast to all previous studies of dsRNA viruses, PcV capsid is an authentic T=1 capsid with 60 equivalent protein subunits. This T=1 capsid is built with the largest structural protein (110 kDa). Structural comparison between viral particles and capsids devoid of RNA show changes along the inner surface of the capsid, mostly located around the icosahedral 5 and 3-fold axis. Considering that there may be numerous interactions between the inner surface of the protein shell and the underlying RNA, the genome could have an important role in the conformation of the structural subunits. The empty capsid structure suggests a mechanism for transcript release from actively transcribing particles. Furthermore, sequence analysis of the PcV coat protein revealed that both halves of the protein share numerous regions of similar amino acid residues. These results open new perspectives when considering the structural organization of dsRNA virus capsids.

Cytoplasmic polyhedrosis virus structure at 8 A by electron cryomicroscopy: structural basis of capsid stability and mRNA processing regulation

The single-shelled cytoplasmic polyhedrosis virus (CPV) is a unique member of the Reoviridae. Despite lacking protective outer shells, it exhibits striking capsid stability and is capable of endogenous RNA transcription and processing. The 8 A three-dimensional structure of CPV by electron cryomicroscopy reveals secondary structure elements present in the capsid proteins CSP, LPP, and TP, which have alpha+beta folds. The extensive nonequivalent interactions between CSP and LPP, the unique CSP protrusion domain, and the perfect inter-CSP surface complementarities may account for the enhanced capsid stability. The slanted disposition of TP functional domains and the stacking of channel constrictions suggest an iris diaphragm-like mechanism for opening/closing capsid pores and turret channels in regulating the highly coordinated steps of mRNA transcription, processing, and release.

The variance of icosahedral virus models is a key indicator in the structure determination: a model-free reconstruction of viruses, suitable for refractory particles

A model-free method to determine the three-dimensional structure of icosahedral viruses is described. The novel strategy is based upon the approximate principle that correct virus structures have high variance as do all other well-detailed structures, even wrong ones. The original projections of individual particles are reduced to a radius of 25 pixels and are used to compute single particle reconstruction models by assigning them 1800 different Euler triads. The variance of the models obtained from all projections is stored in maps and a decimation process is carried out. In a first stage, thresholds are adopted for the variance values, and in a second stage, carried out by correspondence analysis and classification, 30 clusters of models are sorted out. The clusters are refined to yield models contained in boxes of 64(3) voxels. The refined models with highest variance and closest similarity represent the correct solution. Once enlarged, these models can be used to align all available projections in their original scale in a customary projection-matching process. The method has proved successful in determining the structures of poliovirus, of the empty and filled capsids of L-A virus, and of a modified capsid of hepatitis B virus.

Molecular Mechanisms In Bacteriophage T7 Procapsid Assembly, Maturation, And Dna Containment

Bacteriophage T7 is a double-stranded DNA bacteriophage that has attracted particular interest in studies of gene expression and regulation and of morphogenesis, as well as in biotechnological applications of expression vectors and phage display. We report here studies of T7 capsid assembly by cryoelectron microscopy and image analysis. T7 follows the canonical pathway of first forming a procapsid that converts into the mature capsid, but with some novel variations. The procapsid is a round particle with an icosahedral triangulation number of 7 levo, composed of regular pentamers and elongated hexamers. A singular vertex in the procapsid is occupied by the connector/portal protein, which forms 12-fold and 13-fold rings when overexpressed, of which the 12-mer appears to be the assembly-competent form. This vertex is the site of two symmetry mismatches: between the connector and the surrounding five gp 10 hexamers; and between the connector and the 8-fold cylindrical core mounted on its inner surface. The scaffolding protein, gp9, which is required for assembly, forms nubbin-like protrusions underlying the hexamers but not the pentamers, with no contacts between neighboring gp9 monomers. We propose that gp9 facilitates assembly by binding to gp10 hexamers, locking them into a morphogenically correct conformation. gp9 is expelled as the procapsid matures into the larger, thinner walled, polyhedral capsid. Several lines of evidence implicate the connector vertex as the site at which the maturation transformation is initiated: in vivo, maturation appears to be triggered by DNA packaging whereby the signal may involve interaction of the connector with DNA. In the mature T7 head, the DNA is organized as a tightly wound coaxial spool, with the DNA coiled around the core in at least four and perhaps as many as six concentric shells.

The viral killer system in yeast: from molecular biology to application

Since the initial discovery of the yeast killer system almost 40 years ago, intensive studies have substantially strengthened our knowledge in many areas of biology and provided deeper insights into basic aspects of eukaryotic cell biology as well as into virus-host cell interactions and general yeast virology. Analysis of killer toxin structure, synthesis and secretion has fostered understanding of essential cellular mechanisms such as post-translational prepro-protein processing in the secretory pathway. Furthermore, investigation of the receptor-mediated mode of toxin action proved to be an effective means for dissecting the molecular structure and in vivo assembly of yeast and fungal cell walls, providing important insights relevant to combating infections by human pathogenic yeasts. Besides their general importance in understanding eukaryotic cell biology, killer yeasts, killer toxins and killer viruses are also becoming increasingly interesting with respect to possible applications in biomedicine and gene technology. This review will try to address all these aspects.

Endoplasmic reticulum-Golgi intermediate compartment membranes and vimentin filaments participate in vaccinia virus assembly

Vaccinia virus (VV) has a complex morphogenetic pathway whose first steps are poorly characterized. We have studied the early phase of VV assembly, when viral factories and spherical immature viruses (IVs) form in the cytoplasm of the infected cell. After freeze-substitution numerous cellular elements are detected around assembling viruses: membranes, ribosomes, microtubules, filaments, and unidentified structures. A double membrane is clearly resolved in the VV envelope for the first time, and freeze fracture reveals groups of tubules interacting laterally on the surface of the viroplasm foci. These data strongly support the hypothesis of a cellular tubulovesicular compartment, related to the endoplasmic reticulum-Golgi intermediate compartment (ERGIC), as the origin of the first VV envelope. Moreover, the cytoskeletal vimentin intermediate filaments are found around viral factories and inside the viroplasm foci, where vimentin and the VV core protein p39 colocalize in the areas where crescents protrude. Confocal microscopy showed that ERGIC elements and vimentin filaments concentrate in the viral factories. We propose that modified cellular ERGIC membranes and vimentin intermediate filaments act coordinately in the construction of viral factories and the first VV form through a unique mechanism of viral morphogenesis from cellular elements.

C terminus of infectious bursal disease virus major capsid protein VP2 is involved in definition of the T number for capsid assembly

Infectious bursal disease virus (IBDV), a member of the Birnaviridae family, is a double-stranded RNA virus. The IBDV capsid is formed by two major structural proteins, VP2 and VP3, which assemble to form a T=13 markedly nonspherical capsid. During viral infection, VP2 is initially synthesized as a precursor, called VPX, whose C end is proteolytically processed to the mature form during capsid assembly. We have computed three-dimensional maps of IBDV capsid and virus-like particles built up by VP2 alone by using electron cryomicroscopy and image-processing techniques. The IBDV single-shelled capsid is characterized by the presence of 260 protruding trimers on the outer surface. Five classes of trimers can be distinguished according to their different local environments. When VP2 is expressed alone in insect cells, dodecahedral particles form spontaneously; these may be assembled into larger, fragile icosahedral capsids built up by 12 dodecahedral capsids. Each dodecahedral capsid is an empty T=1 shell composed of 20 trimeric clusters of VP2. Structural comparison between IBDV capsids and capsids consisting of VP2 alone allowed the determination of the major capsid protein locations and the interactions between them. Whereas VP2 forms the outer protruding trimers, VP3 is found as trimers on the inner surface and may be responsible for stabilizing functions. Since elimination of the C-terminal region of VPX is correlated with the assembly of T=1 capsids, this domain might be involved (either alone or in cooperation with VP3) in the induction of different conformations of VP2 during capsid morphogenesis.

Purification, crystallization, and preliminary X-ray analysis of L-A: a dsRNA yeast virus

TheL-A virus (LAV) particle is a specialized compartment for the transcription and replication of double-stranded RNA. It is 390 A in diameter and infects yeast. The particle is formed by a capsid containing 120 copies of a 680-residue gene product arranged with T = 1 icosahedral symmetry, approximately two copies of an RNA-directed RNA polymerase, and a 4.6-kb linear, duplex RNA. LAV crystals diffracting to at least 4.5-A resolution were grown in a combination of polyethylene glycol 8000, ethylene glycol, and lithium chloride. Following crystallization the reservoir solution was replaced by a 2x concentrated reservoir solution in order for ethylene glycol to function as a cryoprotectant even though initial crystals would not grow at sufficiently high concentrations of ethylene glycol for cryoprotection. A complete data set was collected to 6-A resolution from a frozen crystal obtained with this procedure. The crystals belong to space group P2(1). The unit cell dimensions are a = 406.7 A, b = 403.3 A, c = 572.5 A, beta = 90.3 degrees with two virus particles in the unit cell. The particle orientation was determined with the rotation function and the particle center was estimated on the basis of packing considerations.

Topology of the components of the DNA packaging machinery in the phage phi29 prohead

Chromosome condensation inside dsDNA viral particles is a complex process requiring the coordinated action of several viral components. The similarity of the process in different viral systems has led to the suggestion that there is a common underlying mechanism for DNA packaging, in which the portal vertex or connector plays a key role. We have studied the topology of the packaging machinery using a number of antibodies directed against different domains of the connector. The charged amino-terminal, the carboxyl-terminal, and the RNA binding domain are accessible areas in the connector assembled into the prohead, while the domains corresponding to the 12 large appendages of the connector are buried inside the prohead. Furthermore, while the antibodies against the carboxyl and amino-terminal do not affect the packaging reaction, incubation of proheads with antibodies against the RNA binding domain abolishes the packaging activity. The comparison of the three-dimensional reconstructions of bacteriophage phi29 proheads with proheads devoid of their specific pRNA by RNase treatment shows that this treatment removes structural elements of the distal vertex of the portal structure, suggesting that the pRNA required for packaging is located at the open gate of the channel in the narrow side of the connector.

Mechanism of genome transcription in segmented dsRNA viruses

Genome transcription is a critical stage in the life cycle of a virus, as this is the process by which the viral genetic information is presented to the host cell protein synthesis machinery for the production of the viral proteins needed for genome replication and progeny virion assembly. Viruses with dsRNA genomes face a particular challenge in that host cells do not produce proteins which can transcribe from a dsRNA template. Therefore, dsRNA viruses contain all of the necessary enzymatic machinery to synthesize complete mRNA transcripts within the core without the need for disassembly. Indeed one of the more striking observations about genome transcription in dsRNA viruses is that this process occurs efficiently only when the transcriptionally competent particle is fully intact. This observation suggests that all of the components of the TCP, including the viral genome, the transcription enzymes, and the viral capsid, function together to produce and release mRNA transcripts and that each component has a specific and critical role to play in promoting the efficiency of this process. This review has examined the process of genome transcription in dsRNA viruses from the perspective of rotavirus as a model system. However, despite numerous architectural and organizational differences among the families of dsRNA viruses, numerous studies suggest that the basic mechanism of mRNA production may be similar in most, if not all, viruses having dsRNA genomes. Important functional similarities include (1) the presence of a capsid-bound RNA-dependent RNA polymerase, which produces single-stranded mRNA transcripts from the dsRNA genome and regenerates the dsRNA genome from single-stranded RNA templates; (2) in viruses infecting eukaryotic hosts, the presence of all the enzymatic activities needed to generate the 5' cap required by the eukaryotic translation machinery; (3) the high degree of structural order present in the packaged genome, suggesting the requirement for organization in the viral core; (4) the role of the innermost capsid protein as a scaffold on which the core components of the transcription apparatus are assembled; and (5) the release of nascent mRNA transcripts through channels at the icosahedral vertices. The process of genome transcription in dsRNA viruses will become better understood as structural studies progress to higher resolution and as more viruses become amenable to study using site-directed mutagenesis coupled with viral reconstitution to generate recombinant particles having precise functional and structural changes. Future studies will dissect important intermolecular interactions required for efficient mRNA synthesis and will shed further light on the reasons for which the viral core must be structurally intact in order for transcription to occur efficiently. Structural studies of the capping enzymes at atomic resolution will reveal how multiple enzyme activities reside within a single polypeptide and how they act in concert to synthesize the 5' cap on the end of each mature transcript. Perhaps most interestingly, high resolution structural studies of actively transcribing virions will provide insight into the conformational changes that occur within the core during mRNA synthesis. Together, these studies will clarify the function of this complex macromolecular machine and will also shed additional light on the basic principles of virus architecture and assembly, as well as provide avenues for the design of antiviral therapies.

Adding the third dimension to virus life cycles: three-dimensional reconstruction of icosahedral viruses from cryo-electron micrographs

Viruses are cellular parasites. The linkage between viral and host functions makes the study of a viral life cycle an important key to cellular functions. A deeper understanding of many aspects of viral life cycles has emerged from coordinated molecular and structural studies carried out with a wide range of viral pathogens. Structural studies of viruses by means of cryo-electron microscopy and three-dimensional image reconstruction methods have grown explosively in the last decade. Here we review the use of cryo-electron microscopy for the determination of the structures of a number of icosahedral viruses. These studies span more than 20 virus families. Representative examples illustrate the use of moderate- to low-resolution (7- to 35-A) structural analyses to illuminate functional aspects of viral life cycles including host recognition, viral attachment, entry, genome release, viral transcription, translation, proassembly, maturation, release, and transmission, as well as mechanisms of host defense. The success of cryo-electron microscopy in combination with three-dimensional image reconstruction for icosahedral viruses provides a firm foundation for future explorations of more-complex viral pathogens, including the vast number that are nonspherical or nonsymmetrical.

RNA-controlled polymorphism in the in vivo assembly of 180-subunit and 120-subunit virions from a single capsid protein

Repeated, specific interactions between capsid protein (CP) subunits direct virus capsid assembly and exemplify regulated protein-protein interactions. The results presented here reveal a striking in vivo switch in CP assembly. Using cryoelectron microscopy, three-dimensional image reconstruction, and molecular modeling, we show that brome mosaic virus (BMV) CP can assemble in vivo two remarkably distinct capsids that selectively package BMV-derived RNAs in the absence of BMV RNA replication: a 180-subunit capsid indistinguishable from virions produced in natural infections and a previously unobserved BMV capsid type with 120 subunits arranged as 60 CP dimers. Each such dimer contains two CPs in distinct, nonequivalent environments, in contrast to the quasi-equivalent CP environments throughout the 180-subunit capsid. This 120-subunit capsid utilizes most of the CP interactions of the 180-subunit capsid plus nonequivalent CP-CP interactions. Thus, the CP of BMV, and perhaps other viruses, can encode CP-CP interactions that are not apparent from mature virions and may function in assembly or disassembly. Shared structural features suggest that the 120- and 180-subunit capsids share assembly steps and that a common pentamer of CP dimers may be an important assembly intermediate. The ability of a single CP to switch between distinct capsids by means of alternate interactions also implies reduced evolutionary barriers between different capsid structures. The in vivo switch between alternate BMV capsids is controlled by the RNA packaged: a natural BMV genomic RNA was packaged in 180-subunit capsids, whereas an engineered mRNA containing only the BMV CP gene was packaged in 120-subunit capsids. RNA features can thus direct the assembly of a ribonucleoprotein complex between alternate structural pathways.

Structural maturation of the transmissible gastroenteritis coronavirus

During the life cycle of the transmissible gastroenteritis coronavirus (TGEV), two types of virus-related particles are detected in infected swine testis cells: large annular viruses and small dense viruses. We have studied the relationships between these two types of particles. Immunoelectron microscopy showed that they are closely related, since both large and small particles reacted equally with polyclonal and monoclonal antibodies specific for TGEV proteins. Monensin, a drug that selectively affects the Golgi complex, caused an accumulation of large annular viral particles in perinuclear elements of the endoplasmic reticulum-Golgi intermediate compartment. A partial reversion of the monensin blockade was obtained in both the absence and presence of cycloheximide, a drug that prevented the formation of new viral particles. After removal of monensin, the Golgi complex recovered its perinuclear location, and a decrease in the number of perinuclear large viral particles was observed. The release of small dense viral particles into secretory vesicles and the extracellular medium was also observed, as was a partial recovery of infectivity in culture supernatants. Small viral particles started to be seen between the third and the fourth Golgi cisternae of normally infected cells. All of these data strongly indicate that the large annular particles are the immature precursors of the small dense viruses, which are the infectious TGEV virions. The immature viral particles need to reach a particular location at the trans side of the Golgi stack to complete their morphological maturation.

Yeast Ty retrotransposons assemble into virus-like particles whose T-numbers depend on the C-terminal length of the capsid protein

The virus-like particles (VLPs) produced by the yeast Ty retrotransposons are structurally and functionally related to retroviral cores. Using cryo-electron microscopy (cryo-EM) and three-dimensional (3D) reconstruction, we have examined the structures of VLPs assembled from full-length and truncated forms of the capsid structural protein. The VLPs are highly polydisperse in their radius distribution. We have found that the length of the C-terminal region of the capsid structural protein dictates the T -number, and thus the size, of the assembled particles. Each construct studied appears to assemble into at least two or three size classes, with shorter C termini giving rise to smaller particles. This assembly property provides a model for understanding the variable assembly of retroviral core proteins. The particles are assembled from trimer-clustered units and there are holes in the capsid shells.

A strategy for determining the orientations of refractory particles for reconstruction from cryo-electron micrographs with particular reference to round, smooth-surfaced, icosahedral viruses

Cryo-electron microscopy and three-dimensional image reconstruction are powerful tools for analyzing icosahedral virus capsids at resolutions that now extend below 1 nm. However, the validity of such density maps depends critically on correct identification of the viewing geometry of each particle in the data set. In some cases-for example, round capsids with low surface relief-it is difficult to identify orientations by conventional application of the two most widely used approaches-"common lines" and model-based iterative refinement. We describe here a strategy for determining the orientations of such refractory specimens. The key step is to determine reliable orientations for a base set of particles. For each particle, a list of candidate orientations is generated by common lines: correct orientations are then identified by computing a single-particle reconstruction for each candidate and then systematically matching their reprojections with the original images by visual criteria and cross-correlation analysis. This base set yields a first-generation reconstruction that is fed into the model-based procedure. This strategy has led to the structural determination of two viruses that, in our hands, resisted solution by other means.

Precise packaging of the three genomic segments of the double-stranded-RNA bacteriophage phi6

Bacteriophage phi6 has a genome of three segments of double-stranded RNA. Each virus particle contains one each of the three segments. Packaging is effected by the acquisition, in a serially dependent manner, of the plus strands of the genomic segments into empty procapsids. The empty procapsids are compressed in shape and expand during packaging. The packaging program involves discrete steps that are determined by the amount of RNA inside the procapsid. The steps involve the exposure and concealment of binding sites on the outer surface of the procapsid for the plus strands of the three genomic segments. The plus strand of segment S can be packaged alone, while packaging of the plus strand of segment M depends upon prior packaging of S. Packaging of the plus strand of L depends upon the prior packaging of M. Minus-strand synthesis begins when the particle has a full complement of plus strands. Plus-strand synthesis commences upon the completion of minus-strand synthesis. All of the reactions of packaging, minus-strand synthesis, and plus-strand synthesis can be accomplished in vitro with isolated procapsids. Live-virus constructions that are in accord with the model have been prepared. Mutant virus with changes in the packaging program have been isolated and analyzed.

Coinfection of a fungal pathogen by two distinct double-stranded RNA viruses

Unsegmented double-stranded (ds)RNA viruses belonging to the family Totiviridae persistently infect protozoa and fungi. In this study, two totiviruses were found to coinfect the filamentous fungus Sphaeropsis sapinea, a well known pathogen of pines. Isometric, virus-like particles approximately 35 nm in diameter were isolated from extracts of this fungus. The nucleotide sequences of the genomes of the two S. sapinea RNA viruses named SsRV1 and SsRV2 were established. The linear genomes of 5163 and 5202 bp, respectively, are identically organized with two large, overlapping ORFs. The 5' located ORF1 probably encodes the coat protein, whereas the gene product of ORF2 shows the typical features of RNA-dependent RNA polymerases. The absence of a pseudoknot and a slippery site at the overlapping region between ORF1 and ORF2, as well as the shortness of that region, leads us to suggest that the translation of ORF2 of both viruses is internally initiated. The mode of translation and the genomic organization are similar to those of Helminthosporium victoriae 190S virus (Hv190SV; Huang, S., and Ghabrial, S. A. (1996). Proc. Natl. Acad. Sci. USA 93, 12541-12546). Hv190SV thus appears to be closely related to the SsRVs. Interestingly, based on amino acid sequence homology SsRV1 is more closely related to Hv190SV than to SsRV2.

Structure of the human cytomegalovirus B capsid by electron cryomicroscopy and image reconstruction

The three-dimensional structure of B capsids of the beta-herpesvirus human cytomegalovirus (HCMV) was investigated at a resolution of 3.5 nm from electron cryomicrographs by image processing and compared with the structure obtained for the alpha-herpesvirus herpes simplex virus type 1 (HSV-1). The main architectural features of the HSV-1 and HCMV capsids are similar: the T = 16 icosahedral lattice consists of 162 capsomers, composed of two distinct morphological units, 12 pentamers and 150 hexamers, with triplex structures linking adjacent capsomers at positions of local threefold symmetry. The main differences in the HSV-1 and HCMV capsids are found in the diameter of the capsids (125 and 130 nm, respectively); the hexamer spacing and relative tilt (center-to-center hexon spacing at outer, edge, 17.9 and 15.8 nm, respectively); the morphology of the tips of the hexons (similar in length but 33% thinner in HCMV); and the average diameter of the scaffold (44 and 76 nm, respectively). By analogy with HSV-1, the mass on the HCMV hexon tip is attributed to the smallest capsid protein (HCMV gene UL48/49). The differences in capsid structure are discussed in relation to the ability of the HCMV structure to package a genome some 60% larger than that of HSV-1.

Assembly of a tailed bacterial virus and its genome release studied in three dimensions

We present the first three-dimensional reconstruction of a prolate, tailed phage, and its empty prohead precursor by cryo-electron microscopy. The head-tail connector, the central component of the DNA packaging machine, is visualized for the first time in situ within the Bacillus subtilis dsDNA phage phi29. The connector, with 12- or 13-fold symmetry, appears to fit loosely into a pentameric vertex of the head, a symmetry mismatch that may be required to rotate the connector to package DNA. The prolate head of phi29 has 10 hexameric units in its cylindrical equatorial region, and 11 pentameric and 20 hexameric units comprise icosahedral end-caps with T=3 quasi-symmetry. Reconstruction of an emptied phage particle shows that the connector and neck/tail assembly undergo significant conformational changes upon ejection of DNA.

The atomic structure of the bluetongue virus core

The structure of the core particle of bluetongue virus has been determined by X-ray crystallography at a resolution approaching 3.5 A. This transcriptionally active compartment, 700 A in diameter, represents the largest molecular structure determined in such detail. The atomic structure indicates how approximately 1,000 protein components self-assemble, using both the classical mechanism of quasi-equivalent contacts, which are achieved through triangulation, and a different method, which we term geometrical quasi-equivalence.

The Gag domain of the Gag-Pol fusion protein directs incorporation into the L-A double-stranded RNA viral particles in Saccharomyces cerevisiae

The L-A double-stranded RNA virus of yeast encodes its major coat protein, Gag, and a Gag-Pol fusion protein made by a -1 ribosomal frameshift, a coding strategy used by many retroviruses. We find that cells expressing only Gag from one plasmid and only Gag-Pol (in frame) from a separate plasmid can support the propagation of M1 double-stranded RNA, encoding the killer toxin. We use this system to separately investigate the functions of Gag and the Gag part of Gag-Pol. L-A contains two fusion protein molecules per particle, and although N-terminal acetylation of Gag is essential for viral assembly, it is completely dispensable for function of Gag-Pol. In general, the requirements on Gag for viral assembly and propagation are more stringent than on the Gag part of Gag-Pol. Finally, we directly show that it is Gag that instructs the incorporation of Gag-Pol into the viral particles.