Capture of genomic and T-DNA sequences during double-strand break repair in somatic plant cells

Hybrid Genome Evolution by Transposition: An Update

Contrary to the view that hybrids are lineages devoid of evolutionary value, a number of case studies that have been lately reported show how hybrids are at the origin of many species. Some well-documented cases demonstrate that bursts of transposition often follow hybridization, generating new genetic variability. Studies in hybrid transposition strongly suggest that epigenetic changes and divergence in piRNA pathways drive deregulation in TE landscapes. Here, I have focused on mechanisms acting in Drosophila hybrids between two cactophilic species. The results reported here show that while hybrid instability by transposition is a genome-wide event, deregulation by TE overexpression in hybrid ovaries is not a general rule. When piRNA pools of ovaries are studied, results show that TEs with parental differences higher than 2-fold in their piRNA amounts are not more commonly deregulated in hybrids than TEs with similar levels, partially discrediting the generality of the maternal cytotype hypothesis. Some promising results on the piRNA pathway global failure hypothesis, which states that accumulated divergence of piRNA effector proteins is responsible for hybrid TE deregulation, have also been obtained. Altogether, these results suggest that TE deregulation might be driven by several interacting mechanisms. A natural scenario is proposed in which genome instability by transposition leads to hybrid genome reorganization. Small hybrid populations, subjected to natural selection helped by genetic drift, evolve new adaptations adapted to novel environments. The final step is either introgression or even a new hybrid species.

Detection and Identification of Genome Editing in Plants: Challenges and Opportunities

Conventional genetic engineering techniques generate modifications in the genome via stable integration of DNA elements which do not occur naturally in this combination. Therefore, the resulting organisms and (most) products thereof can unambiguously be identified with event-specific PCR-based methods targeting the insertion site. New breeding techniques such as genome editing diversify the toolbox to generate genetic variability in plants. Several of these techniques can introduce single nucleotide changes without integrating foreign DNA and thereby generate organisms with intended phenotypes. Consequently, such organisms and products thereof might be indistinguishable from naturally occurring or conventionally bred counterparts with established analytical tools. The modifications can entirely resemble random mutations regardless of being spontaneous or induced chemically or via irradiation. Therefore, if an identification of these organisms or products thereof is demanded, a new challenge will arise for (official) seed, food, and feed testing laboratories and enforcement institutions. For detailed consideration, we distinguish between the detection of sequence alterations - regardless of their origin - the identification of the process that generated a specific modification and the identification of a genotype, i.e., an organism produced by genome editing carrying a specific genetic alteration in a known background. This article briefly reviews the existing and upcoming detection and identification strategies (including the use of bioinformatics and statistical approaches) in particular for plants developed with genome editing techniques.

DNA Break Repair in Plants and Its Application for Genome Engineering

Genome engineering is a biotechnological approach to precisely modify the genetic code of a given organism in order to change the context of an existing sequence or to create new genetic resources, e.g., for obtaining improved traits or performance. Efficient targeted genome alterations are mainly based on the induction of DNA double-strand breaks (DSBs) or adjacent single-strand breaks (SSBs). Naturally, all organisms continuously have to deal with DNA-damaging factors challenging the genetic integrity, and therefore a wide range of DNA repair mechanisms have evolved. A profound understanding of the different repair pathways is a prerequisite to control and enhance targeted gene modifications. DSB repair can take place by nonhomologous end joining (NHEJ) or homology-dependent repair (HDR). As the main outcome of NHEJ-mediated repair is accompanied by small insertions and deletions, it is applicable to specifically knock out genes or to rearrange linkage groups or whole chromosomes. The basic requirement for HDR is the presence of a homologous template; thus this process can be exploited for targeted integration of ectopic sequences into the plant genome. The development of different types of artificial site-specific nucleases allows for targeted DSB induction in the plant genome. Such synthetic nucleases have been used for both qualitatively studying DSB repair in vivo with respect to mechanistic differences and quantitatively in order to determine the role of key factors for NHEJ and HR, respectively. The conclusions drawn from these studies allow for a better understanding of genome evolution and help identifying synergistic or antagonistic genetic interactions while supporting biotechnological applications for transiently modifying the plant DNA repair machinery in favor of targeted genome engineering.

Gene Stacking in Plants Through the Application of Site-Specific Recombination and Nuclease Activity

Biotechnology methods for inserting genes one by one or as a block of fragment into plant genomes are needed to introduce valuable traits into crop varieties. Insertion of multiple genes into a single site, called as molecular stacking, is important to allow co-inheritance of the genes into the progeny. Generally, two approaches are available for creating gene stacks: nuclease-induced targeted gene integration into native sites and recombinase-mediated gene integration into the engineered sites. The recombinase application is attractive as several recombinases show high efficiency and precision in plant genomes. This chapter describes a gene stacking method based on the use of Cre-lox site-specific recombination system to integrate genes into the engineered sites and nucleases to delete selection genes leading to stacking of traits into a single genomic site. High efficiency and precision, and undetectable off-target effects of Cre-lox in a number of plant species, make it an attractive tool for complex applications such as gene stacking.

Plant DNA Repair Pathways and Their Applications in Genome Engineering

Remarkable progress in the development of technologies for sequence-specific modification of primary DNA sequences has enabled the precise engineering of crops with novel characteristics. These programmable sequence-specific modifiers include site-directed nucleases (SDNs) and base editors (BEs). Currently, these genome editing machineries can be targeted to specific chromosomal locations to induce sequence changes. However, the sequence mutation outcomes are often greatly influenced by the type of DNA damage being generated, the status of host DNA repair machinery, and the presence and structure of DNA repair donor molecule. The outcome of sequence modification from repair of DNA double-strand breaks (DSBs) is often uncontrollable, resulting in unpredictable sequence insertions or deletions of various sizes. For base editing, the precision of intended edits is much higher, but the efficiency can vary greatly depending on the type of BE used or the activity of the endogenous DNA repair systems. This article will briefly review the possible DNA repair pathways present in the plant cells commonly used for generating edited variants for genome engineering applications. We will discuss the potential use of DNA repair mechanisms for developing and improving methodologies to enhance genome engineering efficiency and to direct DNA repair processes toward the desired outcomes.

The CRISPR/Cas revolution continues: From efficient gene editing for crop breeding to plant synthetic biology

Since the discovery that nucleases of the bacterial CRISPR (clustered regularly interspaced palindromic repeat)-associated (Cas) system can be used as easily programmable tools for genome engineering, their application massively transformed different areas of plant biology. In this review, we assess the current state of their use for crop breeding to incorporate attractive new agronomical traits into specific cultivars of various crop plants. This can be achieved by the use of Cas9/12 nucleases for double-strand break induction, resulting in mutations by non-homologous recombination. Strategies for performing such experiments - from the design of guide RNA to the use of different transformation technologies - are evaluated. Furthermore, we sum up recent developments regarding the use of nuclease-deficient Cas9/12 proteins, as DNA-binding moieties for targeting different kinds of enzyme activities to specific sites within the genome. Progress in base deamination, transcriptional induction and transcriptional repression, as well as in imaging in plants, is also discussed. As different Cas9/12 enzymes are at hand, the simultaneous application of various enzyme activities, to multiple genomic sites, is now in reach to redirect plant metabolism in a multifunctional manner and pave the way for a new level of plant synthetic biology.

CRISPR-Cas9 based plant genome editing: Significance, opportunities and recent advances

Precise genome editing is a quantum leap in the field of plant sciences. Clustered regularly interspaced short palindromic repeats (CRISPR) and its associated Cas9 protein have emerged as a powerful tool for precise genome editing. CRISPR-Cas9 system introduces small heritable mutations (indels) in the genome of an organism. This system also enables precise gene characterization in plants with complex genomes. Besides, it offers new opportunities of trait stacking, where addition of desirable traits or removal of undesirable traits can be achieved simultaneously in a single event. With CRISPR-Cas9 RNPs technology, raising transgene free genetically modified plants is within realm of possibility which would be helpful in addressing regulatory concerns of transgenic plants. Several new advancements have been made in this technology which has extended its applications in almost every aspect of plant science. For example, recently developed catalytically inactive dCas9 fused with transcriptional effector domains allows targeted activation or silencing of the gene of interest. Apart from this, dCas9 fused with fluorescent labels is a budding tool in chromatin imaging studies. In this review, we summarize these recent advancements in CRISPR/Cas system and methods for analyzing the induced mutations, and its implementations in crop improvement.

A Dual sgRNA Approach for Functional Genomics in Arabidopsis thaliana

Reverse genetics uses loss-of-function alleles to interrogate gene function. The advent of CRISPR/Cas9-based gene editing now allows the generation of knock-out alleles for any gene and entire gene families. Even in the model plant Arabidopsis thaliana, gene editing is welcomed as T-DNA insertion lines do not always generate null alleles. Here, we show efficient generation of heritable mutations in Arabidopsis using CRISPR/Cas9 with a workload similar to generating overexpression lines. We obtain for several different genes Cas9 null-segregants with bi-allelic mutations in the T2 generation. While somatic mutations were predominantly generated by the canonical non-homologous end joining (cNHEJ) pathway, we observed inherited mutations that were the result of synthesis-dependent microhomology-mediated end joining (SD-MMEJ), a repair pathway linked to polymerase θ (PolQ). We also demonstrate that our workflow is compatible with a dual sgRNA approach in which a gene is targeted by two sgRNAs simultaneously. This paired nuclease method results in more reliable loss-of-function alleles that lack a large essential part of the gene. The ease of the CRISPR/Cas9 workflow should help in the eventual generation of true null alleles of every gene in the Arabidopsis genome, which will advance both basic and applied plant research.

The CRISPR/Cas revolution reaches the RNA world: Cas13, a new Swiss Army knife for plant biologists

Application of the bacterial CRISPR/Cas systems to eukaryotes is revolutionizing biology. Cas9 and Cas12 (previously called Cpf1) are widely used as DNA nucleases for inducing site-specific DNA breaks for different kinds of genome engineering applications, and in their mutated forms as DNA-binding proteins to modify gene expression. Moreover, histone modifications, as well as cytosine methylation or base editing, were achieved with these systems in plants. Recently, with the discovery of the nuclease Cas13a (previously called C2c2), molecular biologists have obtained a system that enables sequence-specific cleavage of single-stranded RNA molecules. The latest experiments with this and also the alternative Cas13b system demonstrate that these proteins can be used in a similar manner in eukaryotes for RNA manipulation as Cas9 and Cas12 for DNA manipulations. The first application of Cas13a for post-transcriptional regulation of gene expression in plants has been reported. Recent results show that the system is also applicable for combating viral infection in plants. As single-stranded RNA viruses are by far the most abundant class of viruses in plants, the application of this system is of special promise for crops. More interesting applications are imminent for plant biologists, with nuclease dead versions of Cas13 enabling the ability to visualize RNA molecules in vivo, as well as to edit different kinds of RNA molecules at specific bases by deamination or to modify them by conjugation. Moreover, by combining DNA- and RNA-directed systems, the most complex of changes in plant metabolism might be achievable.

Transforming plant biology and breeding with CRISPR/Cas9, Cas12 and Cas13

Currently, biology is revolutionized by ever growing applications of the CRISPR/Cas system. As discussed in this Review, new avenues have opened up for plant research and breeding by the use of the sequence-specific DNases Cas9 and Cas12 (formerly named Cpf1) and, more recently, the RNase Cas13 (formerly named C2c2). Although double strand break-induced gene editing based on error-prone nonhomologous end joining has been applied to obtain new traits, such as powdery mildew resistance in wheat or improved pathogen resistance and increased yield in tomato, improved technologies based on CRISPR/Cas for programmed change in plant genomes via homologous recombination have recently been developed. Cas9- and Cas12- mediated DNA binding is used to develop tools for many useful applications, such as transcriptional regulation or fluorescence-based imaging of specific chromosomal loci in plant genomes. Cas13 has recently been applied to degrade mRNAs and combat viral RNA replication. By the possibility to address multiple sequences with different guide RNAs and by the simultaneous use of different Cas proteins in a single cell, we should soon be able to achieve complex changes of plant metabolism in a controlled way.

CRISPR/Cas9-mediated mutagenesis of lncRNA1459 alters tomato fruit ripening

With the development of high-throughput sequencing, many long non-coding RNAs (lncRNAs) have been found to play important roles in diverse biological processes. However, the biological functions of most plant lncRNAs are still unknown. We have previously discovered a tomato ripening-related lncRNA, lncRNA1459. Here, we cloned the full-length lncRNA1459, giving two transcript isoforms. In addition, lncRNA1459 exhibited a specific location in the nucleus. Furthermore, in order to fully identify the function of lncRNA1459 in tomato ripening, loss-of-function mutants of lncRNA1459 were developed using clustered regularly interspaced short palindromic repeats (CRISPR)/-associated protein 9 (Cas9)-induced genome editing technology. Compared with wild-type fruits, the tomato ripening process was significantly repressed in lncRNA1459 mutants. Ethylene production and lycopene accumulation were largely repressed in lncRNA1459 mutants. Additionally, genes related to ethylene and carotenoid biosynthesis were distinctly downregulated in lncRNA1459 mutants compared with wild-type fruits. Moreover, expression of numerous ripening-related genes was changed significantly when lncRNA1459 was knocked out. Expression of potential tomato ripening-related lncRNAs was also specifically changed after knocking out lncRNA1459. Taken together, these results provide insight into the role of lncRNA1459 in tomato fruit ripening.

Efficient in planta gene targeting in Arabidopsis using egg cell-specific expression of the Cas9 nuclease of Staphylococcus aureus

Gene targeting (GT), the programmed change of genomic sequences by homologous recombination (HR), is still a major challenge in plants. We previously developed an in planta GT strategy by simultaneously releasing from the genome a dsDNA donor molecule and creating a double-stranded break (DSB) at a specific site within the targeted gene. Using Cas9 form Streptococcus pyogenes (SpCas9) under the control of a ubiquitin gene promoter, we obtained seeds harbouring GT events, although at a low frequency. In the present research we tested different developmentally controlled promotors and different kinds of DNA lesions for their ability to enhance GT of the acetolactate synthase (ALS) gene of Arabidopsis. For this purpose, we used Staphylococcus aureus Cas9 (SaCas9) nuclease and the SpCas9 nickase in various combinations. Thus, we analysed the effect of single-stranded break (SSB) activation of a targeted gene and/or the HR donor region. Moreover, we tested whether DSBs with 5' or 3' overhangs can improve in planta GT. Interestingly, the use of the SaCas9 nuclease controlled by an egg cell-specific promoter was the most efficient: depending on the line, in the very best case 6% of all seeds carried GT events. In a third of all lines, the targeting occurred around the 1% range of the tested seeds. Molecular analysis revealed that in about half of the cases perfect HR of both DSB ends occurred. Thus, using the improved technology, it should now be feasible to introduce any directed change into the Arabidopsis genome at will.

Potential high-frequency off-target mutagenesis induced by CRISPR/Cas9 in Arabidopsis and its prevention

KEY MESSAGE

We present novel observations of high-specificity SpCas9 variants, sgRNA expression strategies based on mutant sgRNA scaffold and tRNA processing system, and CRISPR/Cas9-mediated T-DNA integrations. Specificity of CRISPR/Cas9 tools has been a major concern along with the reports of their successful applications. We report unexpected observations of high frequency off-target mutagenesis induced by CRISPR/Cas9 in T1 Arabidopsis mutants although the sgRNA was predicted to have a high specificity score. We also present evidence that the off-target effects were further exacerbated in the T2 progeny. To prevent the off-target effects, we tested and optimized two strategies in Arabidopsis, including introduction of a mCherry cassette for a simple and reliable isolation of Cas9-free mutants and the use of highly specific mutant SpCas9 variants. Optimization of the mCherry vectors and subsequent validation found that fusion of tRNA with the mutant rather than the original sgRNA scaffold significantly improves editing efficiency. We then examined the editing efficiency of eight high-specificity SpCas9 variants in combination with the improved tRNA-sgRNA fusion strategy. Our results suggest that highly specific SpCas9 variants require a higher level of expression than their wild-type counterpart to maintain high editing efficiency. Additionally, we demonstrate that T-DNA can be inserted into the cleavage sites of CRISPR/Cas9 targets with high frequency. Altogether, our results suggest that in plants, continuous attention should be paid to off-target effects induced by CRISPR/Cas9 in current and subsequent generations, and that the tools optimized in this report will be useful in improving genome editing efficiency and specificity in plants and other organisms.

Non-transgenic Approach to Deliver ZFNs in Seeds for Targeted Genome Engineering

In the post-genomic era, the efficient exploitation of the available information for plant breeding is a pressing problem. The discoveries that DNA double-stranded breaks (DSBs) are both recombinagenic and mutagenic have fuelled the development of targetable zinc-finger nucleases (ZFNs), which act as molecular scissors for the induction of controlled DSBs. These powerful tools are used by researchers to accelerate mutagenesis of the normal gene loci toward the development of useful traits in plants. Seeds contain the embryo, which is a multicellular system representing a micrography of a plant. Therefore, they can serve as a foundation for applying targeted genome engineering techniques. The following single-step method describes how to deliver and express transiently ZFNs in tomato (Solanum lycopersicum) seeds using electroporation. Unlike methods that rely on tissue culture and plant regeneration after transformation, the direct delivery of ZFNs to seeds provides a high-throughput breeding technology for safe and site-specific mutagenesis. Tomato is a leading crop in the world and biotechnological advances in this species have great impact.

Agrobacterium-Mediated Transformation of Yeast and Fungi

Two decades ago, it was discovered that the well-known plant vector Agrobacterium tumefaciens can also transform yeasts and fungi when these microorganisms are co-cultivated on a solid substrate in the presence of a phenolic inducer such as acetosyringone. It is important that the medium has a low pH (5-6) and that the temperature is kept at room temperature (20-25 °C) during co-cultivation. Nowadays, Agrobacterium-mediated transformation (AMT) is the method of choice for the transformation of many fungal species; as the method is simple, the transformation efficiencies are much higher than with other methods, and AMT leads to single-copy integration much more frequently than do other methods. Integration of T-DNA in fungi occurs by non-homologous end-joining (NHEJ), but also targeted integration of the T-DNA by homologous recombination (HR) is possible. In contrast to AMT of plants, which relies on the assistance of a number of translocated virulence (effector) proteins, none of these (VirE2, VirE3, VirD5, VirF) are necessary for AMT of yeast or fungi. This is in line with the idea that some of these proteins help to overcome plant defense. Importantly, it also showed that VirE2 is not necessary for the transport of the T-strand into the nucleus. The yeast Saccharomyces cerevisiae is a fast-growing organism with a relatively simple genome with reduced genetic redundancy. This yeast species has therefore been used to unravel basic molecular processes in eukaryotic cells as well as to elucidate the function of virulence factors of pathogenic microorganisms acting in plants or animals. Translocation of Agrobacterium virulence proteins into yeast was recently visualized in real time by confocal microscopy. In addition, the yeast 2-hybrid system, one of many tools that have been developed for use in this yeast, was used to identify plant and yeast proteins interacting with the translocated Agrobacterium virulence proteins. Dedicated mutant libraries, containing for each gene a mutant with a precise deletion, have been used to unravel the mode of action of some of the Agrobacterium virulence proteins. Yeast deletion mutant collections were also helpful in identifying host factors promoting or inhibiting AMT, including factors involved in T-DNA integration. Thus, the homologous recombination (HR) factor Rad52 was found to be essential for targeted integration of T-DNA by HR in yeast. Proteins mediating double-strand break (DSB) repair by end-joining (Ku70, Ku80, Lig4) turned out to be essential for non-homologous integration. Inactivation of any one of the genes encoding these end-joining factors in other yeasts and fungi was employed to reduce or totally eliminate non-homologous integration and promote efficient targeted integration at the homologous locus by HR. In plants, however, their inactivation did not prevent non-homologous integration, indicating that T-DNA is captured by different DNA repair pathways in plants and fungi.

Application of CRISPR/Cas to Understand Cis- and Trans-Regulatory Elements in Plants

The recent emergence of the CRISPR/Cas system as a genome editing tool enables simple, fast, and efficient induction of DNA double-strand breaks at precise positions in the genome. This has proven extremely useful for analysis and modification of protein-coding sequences. Regulatory sequences have received much less attention, but can now be quickly and easily disrupted as well. Editing of cis-regulatory elements (CRE) offers considerable potential for crop improvement via fine-tuning of gene expression that cannot be achieved by simple KO mutations, but its widespread application is still hampered by a lack of precise knowledge about functional motifs in CRE. As demonstrated for mammalian cells, CRISPR/Cas is also extremely useful for the identification and analysis of CRE in their native environment on a large scale using tiling screens. Transcriptional complexes are another promising target for crop genome editing, as demonstrated for pathogen resistance and regulation of flowering. The development of more diverse and sophisticated CRISPR/Cas tools for genome editing will allow even more efficient and powerful approaches for editing of regulatory sequences in the future.

Integration of Agrobacterium T-DNA into the Plant Genome

Agrobacterium strains transfer a single-strand form of T-DNA (T-strands) and Virulence (Vir) effector proteins to plant cells. Following transfer, T-strands likely form complexes with Vir and plant proteins that traffic through the cytoplasm and enter the nucleus. T-strands may subsequently randomly integrate into plant chromosomes and permanently express encoded transgenes, a process known as stable transformation. The molecular processes by which T-strands integrate into the host genome remain unknown. Although integration resembles DNA repair processes, the requirement of known DNA repair pathways for integration is controversial. The configuration and genomic position of integrated T-DNA molecules likely affect transgene expression, and control of integration is consequently important for basic research and agricultural biotechnology applications. This article reviews our current knowledge of the process of T-DNA integration and proposes ways in which this knowledge may be manipulated for genome editing and synthetic biology purposes.

Trait stacking in modern agriculture: application of genome editing tools

Advances in plant transgenic technology in the 20th century overcame the major hurdle for transfer of genetic material between species. This not only enabled fundamental insights into plant biology, but also revolutionized commercial agriculture. Adoption of transgenic plants in industrial agriculture has reduced pesticide application, while bringing significant increase in crop yields and farmers' profits. The progress made in transgenic technology over the last three decades paved the way mainly for simple single-gene insect and herbicide tolerance (HT) trait products. Modern agriculture demands stacking and pyramiding of complex traits that provide broad-spectrum insect and HT with other agronomic traits. In addition, more recent developments in genome editing provide unique opportunities to create precise on-demand genome modifications to enhance crop productivity. The major challenge for the plant biotech industry therefore remains to combine multiple forms of traits needed to create commercially viable stacked product. This review provides a historical perspective of conventional breeding stacks, current status of molecular stacks and future developments needed to enable genome-editing technology for trait stacking.

Endogenous sequence patterns predispose the repair modes of CRISPR/Cas9-induced DNA double-stranded breaks in Arabidopsis thaliana

The possibility to predict the outcome of targeted DNA double-stranded break (DSB) repair would be desirable for genome editing. Furthermore the consequences of mis-repair of potentially cell-lethal DSBs and the underlying pathways are not yet fully understood. Here we study the clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9-induced mutation spectra at three selected endogenous loci in Arabidopsis thaliana by deep sequencing of long amplicon libraries. Notably, we found sequence-dependent genomic features that affected the DNA repair outcome. Deletions of 1-bp to <1000-bp size and/or very short insertions, deletions >1 kbp (all due to NHEJ) and deletions combined with insertions between 5-bp to >100 bp [caused by a synthesis-dependent strand annealing (SDSA)-like mechanism] occurred most frequently at all three loci. The appearance of single-stranded annealing events depends on the presence and distance between repeats flanking the DSB. The frequency and size of insertions is increased if a sequence with high similarity to the target site was available in cis. Most deletions were linked to pre-existing microhomology. Deletion and/or insertion mutations were blunt-end ligated or via de novo generated microhomology. While most mutation types and, to some degree, their predictability are comparable with animal systems, the broad range of deletion mutations seems to be a peculiar feature of the plant A. thaliana.

T-DNA-genome junctions form early after infection and are influenced by the chromatin state of the host genome

Agrobacterium tumefaciens mediated T-DNA integration is a common tool for plant genome manipulation. However, there is controversy regarding whether T-DNA integration is biased towards genes or randomly distributed throughout the genome. In order to address this question, we performed high-throughput mapping of T-DNA-genome junctions obtained in the absence of selection at several time points after infection. T-DNA-genome junctions were detected as early as 6 hours post-infection. T-DNA distribution was apparently uniform throughout the chromosomes, yet local biases toward AT-rich motifs and T-DNA border sequence micro-homology were detected. Analysis of the epigenetic landscape of previously isolated sites of T-DNA integration in Kanamycin-selected transgenic plants showed an association with extremely low methylation and nucleosome occupancy. Conversely, non-selected junctions from this study showed no correlation with methylation and had chromatin marks, such as high nucleosome occupancy and high H3K27me3, that correspond to three-dimensional-interacting heterochromatin islands embedded within euchromatin. Such structures may play a role in capturing and silencing invading T-DNA.

Agrobacterium tumefaciens mediated T-DNA integration is an important tool for genetic engineering in plants. This work compares the genetic and epigenetic landscapes of T-DNA-genome junctions under selective and non-selective conditions. Under selection, preferential junctions in low-nucleosome occupancy and hypomethylated regions were found. In the absence of selection, these biases disappeared and T-DNA-genome junctions were uniformly distributed with a preference for 3D-interacting heterochromatin islands embedded within euchromatin, suggesting that many integration events become transcriptionally inactive.

Generation of Targeted Knockout Mutants in Arabidopsis thaliana Using CRISPR/Cas9

The CRISPR/Cas9 system has emerged as a powerful tool for gene editing in plants and beyond. We have developed a plant vector system for targeted Cas9-dependent mutagenesis of genes in up to two different target sites in Arabidopsis thaliana. This protocol describes a simple 1-week cloning procedure for a single T-DNA vector containing the genes for Cas9 and sgRNAs, as well as the detection of induced mutations in planta. The procedure can likely be adapted for other transformable plant species.

Cascade of chromosomal rearrangements caused by a heterogeneous T-DNA integration supports the double-stranded break repair model for T-DNA integration

Transferred DNA (T-DNA) from Agrobacterium tumefaciens can be integrated into the plant genome. The double-stranded break repair (DSBR) pathway is a major model for T-DNA integration. From this model, we expect that two ends of a T-DNA molecule would invade into a single DNA double-stranded break (DSB) or independent DSBs in the plant genome. We call the later phenomenon a heterogeneous T-DNA integration, which has never been observed. In this work, we demonstrated it in an Arabidopsis T-DNA insertion mutant seb19. To resolve the chromosomal structural changes caused by T-DNA integration at both the nucleotide and chromosome levels, we performed inverse PCR, genome resequencing, fluorescence in situ hybridization and linkage analysis. We found, in seb19, a single T-DNA connected two different chromosomal loci and caused complex chromosomal rearrangements. The specific break-junction pattern in seb19 is consistent with the result of heterogeneous T-DNA integration but not of recombination between two T-DNA insertions. We demonstrated that, in seb19, heterogeneous T-DNA integration evoked a cascade of incorrect repair of seven DSBs on chromosomes 4 and 5, and then produced translocation, inversion, duplication and deletion. Heterogeneous T-DNA integration supports the DSBR model and suggests that two ends of a T-DNA molecule could be integrated into the plant genome independently. Our results also show a new origin of chromosomal abnormalities.

Deletion-bias in DNA double-strand break repair differentially contributes to plant genome shrinkage

In order to prevent genome instability, cells need to be protected by a number of repair mechanisms, including DNA double-strand break (DSB) repair. The extent to which DSB repair, biased towards deletions or insertions, contributes to evolutionary diversification of genome size is still under debate. We analyzed mutation spectra in Arabidopsis thaliana and in barley (Hordeum vulgare) by PacBio sequencing of three DSB-targeted loci each, uncovering repair via gene conversion, single strand annealing (SSA) or nonhomologous end-joining (NHEJ). Furthermore, phylogenomic comparisons between A. thaliana and two related species were used to detect naturally occurring deletions during Arabidopsis evolution. Arabidopsis thaliana revealed significantly more and larger deletions after DSB repair than barley, and barley displayed more and larger insertions. Arabidopsis displayed a clear net loss of DNA after DSB repair, mainly via SSA and NHEJ. Barley revealed a very weak net loss of DNA, apparently due to less active break-end resection and easier copying of template sequences into breaks. Comparative phylogenomics revealed several footprints of SSA in the A. thaliana genome. Quantitative assessment of DNA gain and loss through DSB repair processes suggests deletion-biased DSB repair causing ongoing genome shrinking in A. thaliana, whereas genome size in barley remains nearly constant.

Developing transgenic wheat to encounter rusts and powdery mildew by overexpressing barley chi26 gene for fungal resistance

BACKGROUND

The main aim of this study was to improve fungal resistance in bread wheat via transgenesis. Transgenic wheat plants harboring barley chitinase (chi26) gene, driven by maize ubi promoter, were obtained using biolistic bombardment, whereas the herbicide resistance gene, bar, driven by the CaMV 35S promoter was used as a selectable marker.

RESULTS

Molecular analysis confirmed the integration, copy number, and the level of expression of the chi26 gene in four independent transgenic events. Chitinase enzyme activity was detected using a standard enzymatic assay. The expression levels of chi26 gene in the different transgenic lines, compared to their respective controls, were determined using qRT-PCR. The transgene was silenced in some transgenic families across generations. Gene silencing in the present study seemed to be random and irreversible. The homozygous transgenic plants of T4, T5, T6, T8, and T9 generations were tested in the field for five growing seasons to evaluate their resistance against rusts and powdery mildew. The results indicated high chitinase activity at T0 and high transgene expression levels in few transgenic families. This resulted in high resistance against wheat rusts and powdery mildew under field conditions. It was indicated by proximate and chemical analyses that one of the transgenic families and the non-transgenic line were substantially equivalent.

CONCLUSION

Transgenic wheat with barley chi26 was found to be resistant even after five generations under artificial fungal infection conditions. One transgenic line was proved to be substantially equivalent as compared to the non-transgenic control.

Identification of lignin-deficient Brachypodium distachyon (L.) Beauv. mutants induced by gamma radiation

BACKGROUND

Brachypodium distachyon (L.) Beauv. is a monocotyledonous model plant that has been studied to understand a range of biological phenomena for lignocellulosic bioethanol feedstocks and other cereal crops. The lignin makes its cell walls recalcitrant to saccharification, constituting the main barrier to lignocellulosic bioethanol production. In this study, lignin-deficient mutants of B. distachyon induced by chronic radiation were selected and the effects of the mutants on fermentable glucose production were identified.

RESULTS

Brachypodium distachyon M₂ mutants induced by chronically irradiated gamma radiation were screened by the Wiesner test. Lignin-deficient M₂ mutants were further confirmed in subsequent M₃ and M₄ generations by determining acetyl bromide-soluble lignin. The lignin content was significantly reduced in mutant plants 135-2 (by 7.99%), 142-3 (by 13.8%) and 406-1 (by 8.13%) compared with the wild type. Moreover, fermentable glucose was significantly higher in 135-2 (by 23.91%) and 142-3 (by 36.72%) than in the wild type after 72 h of enzymatic hydrolysis.

CONCLUSION

Three lignin-deficient B. distachyon mutants induced by chronically irradiated gamma radiation were obtained. This study will provide fundamental understanding of the B. distachyon cell wall and could contribute to increases in bioethanol production using bioenergy crops. © 2016 Society of Chemical Industry.

From classical mutagenesis to nuclease-based breeding - directing natural DNA repair for a natural end-product

Production of mutants of crop plants by the use of chemical or physical genotoxins has a long tradition. These factors induce the natural DNA repair machinery to repair damage in an error-prone way. In the case of radiation, multiple double-strand breaks (DSBs) are induced randomly in the genome, leading in very rare cases to a desirable phenotype. In recent years the use of synthetic, site-directed nucleases (SDNs) - also referred to as sequence-specific nucleases - like the CRISPR/Cas system has enabled scientists to use exactly the same naturally occurring DNA repair mechanisms for the controlled induction of genomic changes at pre-defined sites in plant genomes. As these changes are not necessarily associated with the permanent integration of foreign DNA, the obtained organisms per se cannot be regarded as genetically modified as there is no way to distinguish them from natural variants. This applies to changes induced by DSBs as well as single-strand breaks, and involves repair by non-homologous end-joining and homologous recombination. The recent development of SDN-based 'DNA-free' approaches makes mutagenesis strategies in classical breeding indistinguishable from SDN-derived targeted genome modifications, even in regard to current regulatory rules. With the advent of new SDN technologies, much faster and more precise genome editing becomes available at reasonable cost, and potentially without requiring time-consuming deregulation of newly created phenotypes. This review will focus on classical mutagenesis breeding and the application of newly developed SDNs in order to emphasize similarities in the context of the regulatory situation for genetically modified crop plants.

Applying CRISPR/Cas for genome engineering in plants: the best is yet to come

Less than 5 years ago the CRISPR/Cas nuclease was first introduced into eukaryotes, shortly becoming the most efficient and widely used tool for genome engineering. For plants, efforts were centred on obtaining heritable changes in most transformable crop species by inducing mutations into open reading frames of interest, via non-homologous end joining. Now it is important to take the next steps and further develop the technology to reach its full potential. For breeding, besides using DNA-free editing and avoiding off target effects, it will be desirable to apply the system for the mutation of regulatory elements and for more complex genome rearrangements. Targeting enzymatic activities, like transcriptional regulators or DNA modifying enzymes, will be important for plant biology in the future.

Heritability of targeted gene modifications induced by plant-optimized CRISPR systems

The Streptococcus-derived CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats)/Cas9 (CRISPR-associated protein 9) system has emerged as a very powerful tool for targeted gene modifications in many living organisms including plants. Since the first application of this system for plant gene modification in 2013, this RNA-guided DNA endonuclease system has been extensively engineered to meet the requirements of functional genomics and crop trait improvement in a number of plant species. Given its short history, the emphasis of many studies has been the optimization of the technology to improve its reliability and efficiency to generate heritable gene modifications in plants. Here we review and analyze the features of customized CRISPR/Cas9 systems developed for plant genetic studies and crop breeding. We focus on two essential aspects: the heritability of gene modifications induced by CRISPR/Cas9 and the factors affecting its efficiency, and we provide strategies for future design of systems with improved activity and heritability in plants.

High-efficiency gene targeting in hexaploid wheat using DNA replicons and CRISPR/Cas9

The ability to edit plant genomes through gene targeting (GT) requires efficient methods to deliver both sequence-specific nucleases (SSNs) and repair templates to plant cells. This is typically achieved using Agrobacterium T-DNA, biolistics or by stably integrating nuclease-encoding cassettes and repair templates into the plant genome. In dicotyledonous plants, such as Nicotinana tabacum (tobacco) and Solanum lycopersicum (tomato), greater than 10-fold enhancements in GT frequencies have been achieved using DNA virus-based replicons. These replicons transiently amplify to high copy numbers in plant cells to deliver abundant SSNs and repair templates to achieve targeted gene modification. In the present work, we developed a replicon-based system for genome engineering of cereal crops using a deconstructed version of the wheat dwarf virus (WDV). In wheat cells, the replicons achieve a 110-fold increase in expression of a reporter gene relative to non-replicating controls. Furthermore, replicons carrying CRISPR/Cas9 nucleases and repair templates achieved GT at an endogenous ubiquitin locus at frequencies 12-fold greater than non-viral delivery methods. The use of a strong promoter to express Cas9 was critical to attain these high GT frequencies. We also demonstrate gene-targeted integration by homologous recombination (HR) in all three of the homoeoalleles (A, B and D) of the hexaploid wheat genome, and we show that with the WDV replicons, multiplexed GT within the same wheat cell can be achieved at frequencies of ~1%. In conclusion, high frequencies of GT using WDV-based DNA replicons will make it possible to edit complex cereal genomes without the need to integrate GT reagents into the genome.

CRISPR/Cas9-Induced Double-Strand Break Repair in Arabidopsis Nonhomologous End-Joining Mutants

Double-strand breaks (DSBs) are one of the most harmful DNA lesions. Cells utilize two main pathways for DSB repair: homologous recombination (HR) and nonhomologous end-joining (NHEJ). NHEJ can be subdivided into the KU-dependent classical NHEJ (c-NHEJ) and the more error-prone KU-independent backup-NHEJ (b-NHEJ) pathways, involving the poly (ADP-ribose) polymerases (PARPs). However, in the absence of these factors, cells still seem able to adequately maintain genome integrity, suggesting the presence of other b-NHEJ repair factors or pathways independent from KU and PARPs. The outcome of DSB repair by NHEJ pathways can be investigated by using artificial sequence-specific nucleases such as CRISPR/Cas9 to induce DSBs at a target of interest. Here, we used CRISPR/Cas9 for DSB induction at the Arabidopsis cruciferin 3 (CRU3) and protoporphyrinogen oxidase (PPO) genes. DSB repair outcomes via NHEJ were analyzed using footprint analysis in wild-type plants and plants deficient in key factors of c-NHEJ (ku80), b-NHEJ (parp1 parp2), or both (ku80 parp1 parp2). We found that larger deletions of >20 bp predominated after DSB repair in ku80 and ku80 parp1 parp2 mutants, corroborating with a role of KU in preventing DSB end resection. Deletion lengths did not significantly differ between ku80 and ku80 parp1 parp2 mutants, suggesting that a KU- and PARP-independent b-NHEJ mechanism becomes active in these mutants. Furthermore, microhomologies and templated insertions were observed at the repair junctions in the wild type and all mutants. Since these characteristics are hallmarks of polymerase θ-mediated DSB repair, we suggest a possible role for this recently discovered polymerase in DSB repair in plants.

Targeted modification of plant genomes for precision crop breeding

The development of gene targeting and gene editing techniques based on programmable site-directed nucleases (SDNs) has increased the precision of genome modification and made the outcomes more predictable and controllable. These approaches have achieved rapid advances in plant biotechnology, particularly the development of improved crop varieties. Here, we review the range of alterations which have already been implemented in plant genomes, and summarize the reported efficiencies of precise genome modification. Many crop varieties are being developed using SDN technologies and although their regulatory status in the USA is clear there is still a decision pending in the EU. DNA-free genome editing strategies are briefly discussed because they also present a unique regulatory challenge. The potential applications of genome editing in plant breeding and crop improvement are highlighted by drawing examples from the recent literature.

An Efficient Visual Screen for CRISPR/Cas9 Activity in Arabidopsis thaliana

The CRISPR/Cas9 system enables precision editing of the genome of the model plant Arabidopsis thaliana and likely of any other organism. Tools and methods for further developing and optimizing this widespread and versatile system in Arabidopsis would hence be welcomed. Here, we designed a generic vector system that can be used to clone any sgRNA sequence in a plant T-DNA vector containing an ubiquitously expressed Cas9 gene. With this vector, we explored two alternative marker systems for tracking Cas9-mediated gene-editing in vivo: BIALAPHOS RESISTANCE (BAR) and GLABROUS1 (GL1). BAR confers resistance to glufosinate and is widely used as a positive selection marker; GL1 is required for the formation of trichomes. Reversion of a frameshift null BAR allele to a functional one by Cas9-mediated gene editing yielded a higher than expected number of plants that are resistant to glufosinate. Surprisingly, many of those plants did not display reversion of the BAR gene through the germline. We hypothesize that few BAR revertant cells in a highly chimeric plant likely provide system-wide resistance to glufosinate and thus we suggest that BAR is not suitable as marker for tracking Cas9-mediated gene-editing. Targeting the GL1 gene for disruption with Cas9 provided clearly visible phenotypes of partially and completely glabrous plants. 50% of the analyzed T1 plants produced descendants with a chimeric phenotype and we could recover fully homozygous plants in the T3 generation with high efficiency. We propose that targeting of GL1 is suitable for assessing and optimizing Cas9-mediated gene-editing in Arabidopsis.

T-DNA integration in plants results from polymerase-θ-mediated DNA repair

Agrobacterium tumefaciens is a pathogenic bacterium, which transforms plants by transferring a discrete segment of its DNA, the T-DNA, to plant cells. The T-DNA then integrates into the plant genome. T-DNA biotechnology is widely exploited in the genetic engineering of model plants and crops. However, the molecular mechanism underlying T-DNA integration remains unknown1. Here we demonstrate that in Arabidopsis thaliana T-DNA integration critically depends on polymerase theta (Pol θ). We find that TEBICHI/POLQ mutant plants (which have mutated Pol θ), although susceptible to Agrobacterium infection, are resistant to T-DNA integration. Characterization of >10,000 T-DNA-plant genome junctions reveals a distinct signature of Pol θ action and also indicates that 3' end capture at genomic breaks is the prevalent mechanism of T-DNA integration. The primer-template switching ability of Pol θ can explain the molecular patchwork known as filler DNA that is frequently observed at sites of integration. T-DNA integration signatures in other plant species closely resemble those of Arabidopsis, suggesting that Pol-θ-mediated integration is evolutionarily conserved. Thus, Pol θ provides the mechanism for T-DNA random integration into the plant genome, demonstrating a potential to disrupt random integration so as to improve the quality and biosafety of plant transgenesis.

Using CRISPR/Cas in three dimensions: towards synthetic plant genomes, transcriptomes and epigenomes

It is possible to target individual sequence motives within genomes by using synthetic DNA-binding domains. This one-dimensional approach has been used successfully in plants to induce mutations or for the transcriptional regulation of single genes. When the CRISPR (clustered regularly interspaced short palindromic repeats)/Cas9 system was discovered, a tool became available allowing the extension of this approach from one to three dimensions and to construct at least partly synthetic entities on the genome, epigenome and transcriptome levels. The second dimension can be obtained by targeting the Cas9 protein to multiple unique genomic sites by applying multiple different single guiding (sg) RNAs, each defining a different DNA-binding site. Finally, the simultaneous use of phylogenetically different Cas9 proteins or sgRNAs that harbour different types of protein binding motives, allows for a third dimension of control. Thus, different types of enzyme activities - fused either to one type of Cas9 orthologue or to one type of RNA-binding domain specific to one type of sgRNA - can be targeted to multiple different genomic sites simultaneously. Thus, it should be possible to induce quantitatively different levels of expression of certain sets of genes and at the same time to repress other genes, redefining the nuclear transcriptome. Likewise, by the use of different types of histone-modifying and/or DNA (de)methylating activities, the epigenome of plants should be reprogrammable. On our way to synthetic plant genomes, the next steps will be to use complex genome engineering approaches within or between species borders to restructure and recombine natural or artificial chromosomes.

Progress of targeted genome modification approaches in higher plants

Transgene integration in plants is based on illegitimate recombination between non-homologous sequences. The low control of integration site and number of (trans/cis)gene copies might have negative consequences on the expression of transferred genes and their insertion within endogenous coding sequences. The first experiments conducted to use precise homologous recombination for gene integration commenced soon after the first demonstration that transgenic plants could be produced. Modern transgene targeting categories used in plant biology are: (a) homologous recombination-dependent gene targeting; (b) recombinase-mediated site-specific gene integration; (c) oligonucleotide-directed mutagenesis; (d) nuclease-mediated site-specific genome modifications. New tools enable precise gene replacement or stacking with exogenous sequences and targeted mutagenesis of endogeneous sequences. The possibility to engineer chimeric designer nucleases, which are able to target virtually any genomic site, and use them for inducing double-strand breaks in host DNA create new opportunities for both applied plant breeding and functional genomics. CRISPR is the most recent technology available for precise genome editing. Its rapid adoption in biological research is based on its inherent simplicity and efficacy. Its utilization, however, depends on available sequence information, especially for genome-wide analysis. We will review the approaches used for genome modification, specifically those for affecting gene integration and modification in higher plants. For each approach, the advantages and limitations will be noted. We also will speculate on how their actual commercial development and implementation in plant breeding will be affected by governmental regulations.

Repair of adjacent single-strand breaks is often accompanied by the formation of tandem sequence duplications in plant genomes

Duplication of existing sequences is a major mechanism of genome evolution. It has been previously shown that duplications can occur by replication slippage, unequal sister chromatid exchange, homologous recombination, and aberrant double-strand break-induced synthesis-dependent strand annealing reactions. In a recent study, the abundant presence of short direct repeats was documented by comparative bioinformatics analysis of different rice genomes, and the hypothesis was put forward that such duplications might arise due to the concerted repair of adjacent single-strand breaks (SSBs). Applying the CRISPR/Cas9 technology, we were able to test this hypothesis experimentally in the model plant Arabidopsis thaliana Using a Cas9 nickase to induce adjacent genomic SSBs in different regions of the genome (genic, intergenic, and heterochromatic) and at different distances (∼20, 50, and 100 bps), we analyzed the repair outcomes by deep sequencing. In addition to deletions, we regularly detected the formation of direct repeats close to the break sites, independent of the genomic context. The formation of these duplications as well as deletions may be associated with the presence of microhomologies. Most interestingly, we found that even the induction of two SSBs on the same DNA strand can cause genome alterations, albeit at a much lower level. Because such a scenario reflects a natural step during nucleotide excision repair, and given that the germline is set aside only late during development in plants, the repair of adjacent SSBs indeed seems to have an important influence on the shaping of plant genomes during evolution.

Designed nucleases for targeted genome editing

Targeted genome-editing technology using designed nucleases has been evolving rapidly, and its applications are widely expanding in research, medicine and biotechnology. Using this genome-modifying technology, researchers can precisely and efficiently insert, remove or change specific sequences in various cultured cells, micro-organisms, animals and plants. This genome editing is based on the generation of double-strand breaks (DSBs), repair of which modifies the genome through nonhomologous end-joining (NHEJ) or homology-directed repair (HDR). In addition, designed nickase-induced generation of single-strand breaks can also lead to precise genome editing through HDR, albeit at relatively lower efficiencies than that induced by nucleases. Three kinds of designed nucleases have been used for targeted DSB formation: zinc-finger nucleases, transcription activator-like effector nucleases, and RNA-guided engineered nucleases derived from the bacterial clustered regularly interspaced short palindromic repeat (CRISPR)-Cas (CRISPR-associated) system. A growing number of researchers are using genome-editing technologies, which have become more accessible and affordable since the discovery and adaptation of CRISPR-Cas9. Here, the repair mechanism and outcomes of DSBs are reviewed and the three types of designed nucleases are discussed with the hope that such understanding will facilitate applications to genome editing.

A Defect in DNA Ligase4 Enhances the Frequency of TALEN-Mediated Targeted Mutagenesis in Rice

We have established methods for site-directed mutagenesis via transcription activator-like effector nucleases (TALENs) in the endogenous rice (Oryza sativa) waxy gene and demonstrated stable inheritance of TALEN-induced somatic mutations to the progeny. To analyze the role of classical nonhomologous end joining (cNHEJ) and alternative nonhomologous end joining (altNHEJ) pathways in TALEN-induced mutagenesis in plant cells, we investigated whether a lack of DNA Ligase4 (Lig4) affects the kinetics of TALEN-induced double-strand break repair in rice cells. Deep-sequencing analysis revealed that the frequency of all types of mutations, namely deletion, insertion, combination of insertion with deletion, and substitution, in lig4 null mutant calli was higher than that in a lig4 heterozygous mutant or the wild type. In addition, the ratio of large deletions (greater than 10 bp) and deletions repaired by microhomology-mediated end joining (MMEJ) to total deletion mutations in lig4 null mutant calli was higher than that in the lig4 heterozygous mutant or wild type. Furthermore, almost all insertions (2 bp or greater) were shown to be processed via copy and paste of one or more regions around the TALENs cleavage site and rejoined via MMEJ regardless of genetic background. Taken together, our findings indicate that the dysfunction of cNHEJ leads to a shift in the repair pathway from cNHEJ to altNHEJ or synthesis-dependent strand annealing.

Transcription Activator-Like Effector Nucleases (TALEN)-Mediated Targeted DNA Insertion in Potato Plants

Targeted DNA integration into known locations in the genome has potential advantages over the random insertional events typically achieved using conventional means of genetic modification. Specifically integrated transgenes are guaranteed to co-segregate, and expression level is more predictable, which makes downstream characterization and line selection more manageable. Because the site of DNA integration is known, the steps to deregulation of transgenic crops may be simplified. Here we describe a method that combines transcription activator-like effector nuclease (TALEN)-mediated induction of double strand breaks (DSBs) and non-autonomous marker selection to insert a transgene into a pre-selected, transcriptionally active region in the potato genome. In our experiment, TALEN was designed to create a DSB in the genome sequence following an endogenous constitutive promoter. A cytokinin vector was utilized for TALENs expression and prevention of stable integration of the nucleases. The donor vector contained a gene of interest cassette and a promoter-less plant-derived herbicide resistant gene positioned near the T-DNA left border which was used to select desired transgenic events. Our results indicated that TALEN induced T-DNA integration occurred with high frequency and resulting events have consistent expression of the gene of interest. Interestingly, it was found that, in most lines integration took place through one sided homology directed repair despite the minimal homologous sequence at the right border. An efficient transient assay for TALEN activity verification is also described.

Revolutionizing plant biology: multiple ways of genome engineering by CRISPR/Cas

The precise manipulation of plant genomes relies on the induction of DNA double-strand breaks by site-specific nucleases to initiate DNA repair reactions that are either based on non-homologous end joining (NHEJ) or homologous recombination (HR). Recently, the CRISPR/Cas system emerged as the most important tool for genome engineering due to its simple structure and its applicability to a wide range of organisms. Here, we review the current status of its various applications in plants, where it is used for the successful generation of stable mutations in a steadily growing number of species through NHEJ. Furthermore, tremendous progress in plant genome engineering by HR was obtained by the setup of replicon mediated and in planta gene targeting techniques. Finally, other complex approaches that rely on the induction of more than one DNA lesion at a time such as paired nickases to avoid off-site effects or controlled genomic deletions are beginning to be applied routinely.

Highly efficient heritable plant genome engineering using Cas9 orthologues from Streptococcus thermophilus and Staphylococcus aureus

The application of the clustered regularly interspaced short palindromic repeats (CRISPR)/Cas system of Streptococcus pyogenes (SpCas9) is currently revolutionizing genome engineering in plants. However, synthetic plant biology will require more complex manipulations of genomes and transcriptomes. The simultaneous addressing of different specific genomic sites with independent enzyme activities within the same cell is a key to this issue. Such approaches can be achieved by the adaptation of additional bacterial orthologues of the CRISPR/Cas system for use in plant cells. Here, we show that codon-optimised Cas9 orthologues from Streptococcus thermophilus (St1Cas9) and Staphylococcus aureus (SaCas9) can both be used to induce error-prone non-homologous end-joining-mediated targeted mutagenesis in the model plant Arabidopsis thaliana at frequencies at least comparable to those that have previously been reported for the S. pyogenes CRISPR/Cas system. Stable inheritance of the induced targeted mutations of the ADH1 gene was demonstrated for both St1Cas9- and SaCas9-based systems at high frequencies. We were also able to demonstrate that the SaCas9 and SpCas9 proteins enhance homologous recombination via the induction of double-strand breaks only in the presence of their species-specific single guide (sg) RNAs. These proteins are not prone to inter-species interference with heterologous sgRNA expression constructs. Thus, the CRISPR/Cas systems of S. pyogenes and S. aureus should be appropriate for simultaneously addressing different sequence motifs with different enzyme activities in the same plant cell.

The Structural Features of Thousands of T-DNA Insertion Sites Are Consistent with a Double-Strand Break Repair-Based Insertion Mechanism

Transformation by Agrobacterium tumefaciens, an important tool in modern plant research, involves the integration of T-DNA initially present on a plasmid in agrobacteria into the genome of plant cells. The process of attachment of the agrobacteria to plant cells and the transport of T-DNA into the cell and further to the nucleus has been well described. However, the exact mechanism of integration into the host's DNA is still unclear, although several models have been proposed. During confirmation of T-DNA insertion alleles from the GABI-Kat collection of Arabidopsis thaliana mutants, we have generated about 34,000 sequences from the junctions between inserted T-DNA and adjacent genome regions. Here, we describe the evaluation of this dataset with regard to existing models for T-DNA integration. The results suggest that integration into the plant genome is mainly mediated by the endogenous plant DNA repair machinery. The observed integration events showed characteristics highly similar to those of repair sites of double-strand breaks with respect to microhomology and deletion sizes. In addition, we describe unexpected integration events, such as large deletions and inversions at the integration site that are relevant for correct interpretation of results from T-DNA insertion mutants in reverse genetics experiments.

Dissecting the contributions of GC content and codon usage to gene expression in the model alga Chlamydomonas reinhardtii

The efficiency of gene expression in all organisms depends on the nucleotide composition of the coding region. GC content and codon usage are the two key sequence features known to influence gene expression, but the underlying molecular mechanisms are not entirely clear. Here we have determined the relative contributions of GC content and codon usage to the efficiency of nuclear gene expression in the unicellular green alga Chlamydomonas reinhardtii. By comparing gene variants that encode an identical amino acid sequence but differ in their GC content and/or codon usage, we show that codon usage is the key factor determining translational efficiency and, surprisingly, also mRNA stability. By contrast, unfavorable GC content affects gene expression at the level of the chromatin structure by triggering heterochromatinization. We further show that mutant algal strains that permit high-level transgene expression are less susceptible to epigenetic transgene suppression and do not establish a repressive chromatin structure at the transgenic locus. Our data disentangle the relationship between GC content and codon usage, and suggest simple strategies to overcome the transgene expression problem in Chlamydomonas.

Targeted genome modifications in soybean with CRISPR/Cas9

BACKGROUND

The ability to selectively alter genomic DNA sequences in vivo is a powerful tool for basic and applied research. The CRISPR/Cas9 system precisely mutates DNA sequences in a number of organisms. Here, the CRISPR/Cas9 system is shown to be effective in soybean by knocking-out a green fluorescent protein (GFP) transgene and modifying nine endogenous loci.

RESULTS

Targeted DNA mutations were detected in 95% of 88 hairy-root transgenic events analyzed. Bi-allelic mutations were detected in events transformed with eight of the nine targeting vectors. Small deletions were the most common type of mutation produced, although SNPs and short insertions were also observed. Homoeologous genes were successfully targeted singly and together, demonstrating that CRISPR/Cas9 can both selectively, and generally, target members of gene families. Somatic embryo cultures were also modified to enable the production of plants with heritable mutations, with the frequency of DNA modifications increasing with culture time. A novel cloning strategy and vector system based on In-Fusion® cloning was developed to simplify the production of CRISPR/Cas9 targeting vectors, which should be applicable for targeting any gene in any organism.

CONCLUSIONS

The CRISPR/Cas9 is a simple, efficient, and highly specific genome editing tool in soybean. Although some vectors are more efficient than others, it is possible to edit duplicated genes relatively easily. The vectors and methods developed here will be useful for the application of CRISPR/Cas9 to soybean and other plant species.

Targeted genome modifications in soybean with CRISPR/Cas9

BACKGROUND

The ability to selectively alter genomic DNA sequences in vivo is a powerful tool for basic and applied research. The CRISPR/Cas9 system precisely mutates DNA sequences in a number of organisms. Here, the CRISPR/Cas9 system is shown to be effective in soybean by knocking-out a green fluorescent protein (GFP) transgene and modifying nine endogenous loci.

RESULTS

Targeted DNA mutations were detected in 95% of 88 hairy-root transgenic events analyzed. Bi-allelic mutations were detected in events transformed with eight of the nine targeting vectors. Small deletions were the most common type of mutation produced, although SNPs and short insertions were also observed. Homoeologous genes were successfully targeted singly and together, demonstrating that CRISPR/Cas9 can both selectively, and generally, target members of gene families. Somatic embryo cultures were also modified to enable the production of plants with heritable mutations, with the frequency of DNA modifications increasing with culture time. A novel cloning strategy and vector system based on In-Fusion® cloning was developed to simplify the production of CRISPR/Cas9 targeting vectors, which should be applicable for targeting any gene in any organism.

CONCLUSIONS

The CRISPR/Cas9 is a simple, efficient, and highly specific genome editing tool in soybean. Although some vectors are more efficient than others, it is possible to edit duplicated genes relatively easily. The vectors and methods developed here will be useful for the application of CRISPR/Cas9 to soybean and other plant species.

Agrobacterium T-DNA integration into the plant genome can occur without the activity of key non-homologous end-joining proteins

Non-homologous end joining (NHEJ) is the major model proposed for Agrobacterium T-DNA integration into the plant genome. In animal cells, several proteins, including KU70, KU80, ARTEMIS, DNA-PKcs, DNA ligase IV (LIG4), Ataxia telangiectasia mutated (ATM), and ATM- and Rad3-related (ATR), play an important role in 'classical' (c)NHEJ. Other proteins, including histone H1 (HON1), XRCC1, and PARP1, participate in a 'backup' (b)NHEJ process. We examined transient and stable transformation frequencies of Arabidopsis thaliana roots mutant for numerous NHEJ and other related genes. Mutants of KU70, KU80, and the plant-specific DNA Ligase VI (LIG6) showed increased stable transformation susceptibility. However, these mutants showed transient transformation susceptibility similar to that of wild-type plants, suggesting enhanced T-DNA integration in these mutants. These results were confirmed using a promoter-trap transformation vector that requires T-DNA integration into the plant genome to activate a promoterless gusA (uidA) gene, by virus-induced gene silencing (VIGS) of Nicotiana benthamiana NHEJ genes, and by biochemical assays for T-DNA integration. No alteration in transient or stable transformation frequencies was detected with atm, atr, lig4, xrcc1, or parp1 mutants. However, mutation of parp1 caused high levels of T-DNA integration and transgene methylation. A double mutant (ku80/parp1), knocking out components of both NHEJ pathways, did not show any decrease in stable transformation or T-DNA integration. Thus, T-DNA integration does not require known NHEJ proteins, suggesting an alternative route for integration.

Enhanced targeted integration mediated by translocated I-SceI during the Agrobacterium mediated transformation of yeast

Agrobacterium mediated transformation (AMT) has been embraced by biotechnologists as the technology of choice to introduce or alter genetic traits of plants. However, in plants it is virtually impossible to predetermine the integration site of the transferred T-strand unless one is able to generate a double stranded break (DSB) in the DNA at the site of interest. In this study, we used the model organism Saccharomyces cerevisiae to investigate whether the Agrobacterium mediated translocation of site-specific endonucleases via the type IV secretion system (T4SS), concomitantly with T-DNA transfer is possible and whether this can improve the gene targeting efficiency. In addition to that, the effect of different chromatin states on targeted integration, was investigated. It was found that Agrobacterium mediated translocation of the homing endonuclease I-SceI has a positive effect on the integration of T-DNA via the homologous repair (HR) pathway. Furthermore, we obtained evidence that nucleosome removal has a positive effect on I-SceI facilitated T-DNA integration by HR. Reversely; inducing nucleosome formation at the site of integration removes the positive effect of translocated I-SceI on T-DNA integration.

DNA recombination in somatic plant cells: mechanisms and evolutionary consequences

In somatic cells, recombination is a means of DNA damage repair. The most severe type of damage in nuclear DNA is double-strand breaks (DSBs) which may be repaired via either non-homologous end joining (NHEJ) or homologous recombination (HR). In this review, we will summarize the basic features, the mechanisms, and the key players of both repair modes in plants with a focus on the model plant Arabidopsis thaliana. NHEJ may result in insertion of sequences from elsewhere in the genome but is much more often associated with deletions. If more than one DSB is processed simultaneously via NHEJ, besides deletions, inversions or translocations may also arise. As the germ line is only set aside late in plant development, somatic changes may be transferred to the next generation. Thus, NHEJ might influence the evolution of plant genomes and indeed seems to be an important factor of genome shrinking. Deletions may also be due to DSB-induced recombination between tandem duplicated homologous sequences by single-strand annealing (SSA). Moreover, conservative HR using the synthesis-dependent strand annealing (SDSA) mechanism operates in somatic plant cells. The efficiency of SDSA is dependent on the genomic template used as matrix for the repair of the DSB. Besides DSBs, stalled replication forks may also be processed via HR. Several DNA processing enzymes are involved in the regulation of replication initiated HR, mostly in its suppression, and we summarize the current knowledge of these processes in plants.