Selection of viable in vitro-fertilized bovine embryos using time-lapse monitoring in microwell culture dishes

Conventionally, in vitro-fertilized (IVF) bovine embryos for transfer are morphologically evaluated at day 7–8 of embryo culture. This method is, however, subjective and results in unreliable selection. We previously described a novel selection system for IVF bovine blastocysts for transfer that traces the development of individual embryos with time-lapse monitoring in our specially developed microwell culture dishes (LinKID micro25). The system can noninvasively identify prognostic factors that reflect viability after transfer. By assessing a combination of identified prognostic factors —timing of the first cleavage; number of blastomeres at the end of the first cleavage; and number of blastomeres at the onset of lag-phase, which results in temporary developmental arrest during the fourth or fifth cell cycle— the pregnancy rate was improved over using conventional morphological evaluation. Time-lapse monitoring with LinKID micro25 could facilitate objective and reliable selection of healthy IVF bovine embryos. Here, we review the novel bovine embryo selection system that allows for prediction of viability after transfer.

Chromosomal instability in mammalian pre-implantation embryos: potential causes, detection methods, and clinical consequences

Formation of a totipotent blastocyst capable of implantation is one of the first major milestones in early mammalian embryogenesis, but less than half of in vitro fertilized embryos from most mammals will progress to this stage of development. Whole chromosomal abnormalities, or aneuploidy, are key determinants of whether human embryos will arrest or reach the blastocyst stage. Depending on the type of chromosomal abnormality, however, certain embryos still form blastocysts and may be morphologically indistinguishable from chromosomally normal embryos. Despite the implementation of pre-implantation genetic screening and other advanced in vitro fertilization (IVF) techniques, the identification of aneuploid embryos remains complicated by high rates of mosaicism, atypical cell division, cellular fragmentation, sub-chromosomal instability, and micro-/multi-nucleation. Moreover, several of these processes occur in vivo following natural human conception, suggesting that they are not simply a consequence of culture conditions. Recent technological achievements in genetic, epigenetic, chromosomal, and non-invasive imaging have provided additional embryo assessment approaches, particularly at the single-cell level, and clinical trials investigating their efficacy are continuing to emerge. In this review, we summarize the potential mechanisms by which aneuploidy may arise, the various detection methods, and the technical advances (such as time-lapse imaging, "-omic" profiling, and next-generation sequencing) that have assisted in obtaining this data. We also discuss the possibility of aneuploidy resolution in embryos via various corrective mechanisms, including multi-polar divisions, fragment resorption, endoreduplication, and blastomere exclusion, and conclude by examining the potential implications of these findings for IVF success and human fecundity.

Developmental kinetics of in vitro-produced bovine embryos: An aid for making decisions

Embryo developmental kinetics and embryo survival after cryopreservation have been correlated with embryo quality and viability. The main objectives of this work were to analyze developmental ability and quality of in vitro-produced bovine embryos in relation to their kinetics and to establish a criterion of quality to predict further viability. Embryos were classified and grouped by their specific stage of development (2, 3-4, or ≥ 5 cells) at 44 hours post insemination (hpi) and cultured separately up to Day 8. On Days 7 and 8, good quality expanded blastocysts were vitrified or frozen. Cryopreserved surviving hatched embryos were stained for cell counts. Embryos at a more advanced stage (3-4 cells, and ≥5 cells) developed to morulae (P < 0.001) and blastocysts (P < 0.01) at higher rates than those embryos that had cleaved once by 44 hpi. Vitrification improved the hatching rates of blastocysts at 48 hours (P < 0.001) when compared with slow-rate freezing within each group of embryos (3-4 cells and ≥5 cells). After vitrification/warming, blastocysts coming from 3- to 4-cell embryos had higher hatching rates at 48 hours than those that came from ≥5-cell embryos. With regard to differential cell counts, no effect of the initial developmental stage was observed after warming/thawing. However, trophectoderm and total cells were higher in vitrified/warmed than in the frozen/thawed embryos (P < 0.001). These data show that selecting IVF embryos at 44 hpi, after the evaluation of their in vitro embryo development, could be used as noninvasive markers of embryo developmental competence and may help to select IVF embryos that would be more suitable for cryopreservation.

Mammalian pre-implantation chromosomal instability: species comparison, evolutionary considerations, and pathological correlations

Pre-implantation embryo development in mammals begins at fertilization with the migration and fusion of the maternal and paternal pro-nuclei, followed by the degradation of inherited factors involved in germ cell specification and the activation of embryonic genes required for subsequent cell divisions, compaction, and blastulation. The majority of studies on early embryogenesis have been conducted in the mouse or non-mammalian species, often requiring extrapolation of the findings to human development. Given both conserved similarities and species-specific differences, however, even comparison between closely related mammalian species may be challenging as certain aspects, including susceptibility to chromosomal aberrations, varies considerably across mammals. Moreover, most human embryo studies are limited to patient samples obtained from in vitro fertilization (IVF) clinics and donated for research, which are generally of poorer quality and produced with germ cells that may be sub-optimal. Recent technical advances in genetic, epigenetic, chromosomal, and time-lapse imaging analyses of high quality whole human embryos have greatly improved our understanding of early human embryogenesis, particularly at the single embryo and cell level. This review summarizes the major characteristics of mammalian pre-implantation development from a chromosomal perspective, in addition to discussing the technological achievements that have recently been developed to obtain this data. We also discuss potential translation to clinical applications in reproductive medicine and conclude by examining the broader implications of these findings for the evolution of mammalian species and cancer pathology in somatic cells.

Digital Microfluidic Dynamic Culture of Mammalian Embryos on an Electrowetting on Dielectric (EWOD) Chip

Current human fertilization in vitro (IVF) bypasses the female oviduct and manually inseminates, fertilizes and cultivates embryos in a static microdrop containing appropriate chemical compounds. A microfluidic microchannel system for IVF is considered to provide an improved in-vivo-mimicking environment to enhance the development in a culture system for an embryo before implantation. We demonstrate a novel digitalized microfluidic device powered with electrowetting on a dielectric (EWOD) to culture an embryo in vitro in a single droplet in a microfluidic environment to mimic the environment in vivo for development of the embryo and to culture the embryos with good development and live births. Our results show that the dynamic culture powered with EWOD can manipulate a single droplet containing one mouse embryo and culture to the blastocyst stage. The rate of embryo cleavage to a hatching blastocyst with a dynamic culture is significantly greater than that with a traditional static culture (p<0.05). The EWOD chip enhances the culture of mouse embryos in a dynamic environment. To test the reproductive outcome of the embryos collected from an EWOD chip as a culture system, we transferred embryos to pseudo-pregnant female mice and produced live births. These results demonstrate that an EWOD-based microfluidic device is capable of culturing mammalian embryos in a microfluidic biological manner, presaging future clinical application.

Numerical calculations for diffusion effects in the well-of-the-well culture system for mammalian embryos

Recent studies suggest that the microenvironment and embryo density used during embryo culture considerably affect development to the blastocyst stage. High embryo density allows for autocrine secretions to diffuse to neighbouring embryos during group culture, with a positive effect on further development. A variation of group culture is the well-of-the-well (WOW) culture system, allowing for individual identification of embryos cultured in small holes in a microdroplet. Bovine blastocyst development is higher in the WOW culture system than in conventional group culture. To compare the concentration of chemical factors between conventional and WOW culture, a model was constructed to calculate the concentration of secreted factors based on Fick's second law of diffusion using spreadsheet software. Furthermore, model was used to determine the concentration of growth factors and waste materials adjacent to the embryo periphery. The results of these calculations suggest that the highest difference in the concentration of secreted small molecules and macromolecules was at the most two- to threefold, with the concentrations reduced more and diffusion kinetics facilitated to a greater extent in the WOW culture system. The average ratio of the concentration of secreted macromolecules (10nm diameter) around the embryos was also compared between systems with well widths of 0.1 and 0.3mm. The concentration of secreted materials surrounding embryos increased in a narrow tapered well. The findings suggest that the WOW culture system is better than conventional group culture because of the increased final concentration of autocrine factors and higher diffusion kinetics of waste materials.

Use of a novel polydimethylsiloxane well insert to successfully mature, culture and identify single porcine oocytes and embryos

The objective of this study was to evaluate the efficacy of a novel polydimethylsiloxane (PDMS) well-insert system for oocyte in vitro maturation (IVM) and in vitro embryo culture (IVC) in pigs. The PDMS well inserts, consisting of multiple microwells with connecting microchannels, resulted in equivalent blastocyst development compared with standard microdrop culture for IVC. These PDMS well inserts were then evaluated for IVM or IVC in a rocking versus static environment. The rocking environment during both oocyte IVM and embryo culture had detrimental effects on oocyte and embryo development compared with a static environment. Importantly, blastocyst development of oocytes and embryos cultured in the PDMS well inserts in the static environment was equivalent to that of standard microdrops. Further analysis of transcript abundance in blastocysts produced from these different environments revealed that the PDMS well-insert system may produce more viable embryos. In conclusion, this PDMS well-insert system can successfully mature oocytes and culture embryos in an individually-identifiable manner without compromising, and perhaps enhancing, developmental potential.

Why we should not select the faster embryo: lessons from mice and cattle

Many studies have shown that in vitro culture can negatively impact preimplantation development. This necessitates some selection criteria for identifying the best-suited embryos for transfer. That said, embryo selection after in vitro culture remains a subjective process in most mammalian species, including cows, mice and humans. General consensus in the field is that embryos that develop in a timely manner have the highest developmental competence and viability after transfer. Herein lies the key question: what is a timely manner? With emerging data in bovine and mouse supporting increased developmental competency in embryos with moderate rates of development, it is time to question whether the fastest developing embryos are the best embryos for transfer in the human clinic. This is especially relevant to epigenetic gene regulation, including genomic imprinting, where faster developing embryos exhibit loss of imprinted methylation, as well as to sex selection bias, where faster developmental rates of male embryos may lead to biased embryo transfer and, in turn, biased sex ratios. In this review, we explore evidence surrounding the question of developmental timing as it relates to bovine embryo quality, mouse embryo quality and genomic imprint maintenance, and embryo sex.

Preimplantation embryo metabolism and culture systems: experience from domestic animals and clinical implications

Despite advantages of in vitro embryo production in many species, widespread use of this technology is limited by generally lower developmental competence of in vitro derived embryos compared to in vivo counterparts. Regardless, in vivo or in vitro gametes and embryos face and must adjust to multiple microenvironments especially at preimplantation stages. Moreover, the embryo has to be able to further adapt to environmental cues in utero to result in the birth of live and healthy offspring. Enormous strides have been made in understanding and meeting stage-specific requirements of preimplantation embryos, but interpretation of the data is made difficult due to the complexity of the wide array of culture systems and the remarkable plasticity of developing embryos that seem able to develop under a variety of conditions. Nevertheless, a primary objective remains meeting, as closely as possible, the preimplantation embryo requirements as provided in vivo. In general, oocytes and embryos develop more satisfactorily when cultured in groups. However, optimization of individual culture of oocytes and embryos is an important goal and area of intensive current research for both animal and human clinical application. Successful culture of individual embryos is of primary importance in order to avoid ovarian superstimulation and the associated physiological and psychological disadvantages for patients. This review emphasizes stage specific shifts in embryo metabolism and requirements and research to optimize in vitro embryo culture conditions and supplementation, with a view to optimizing embryo culture in general, and culture of single embryos in particular.

Effect of ATP-binding cassette subfamily B member 1 on bovine blastocyst implantation

The ATP-binding cassette subfamily B member 1 (ABCB1) is an efflux transporter that excretes xenobiotics and waste matter. High expression of ABCB1 induced by forskolin (FSK) and rifampicin (RIF) in the bovine blastocysts reportedly improves the cellular quality. In the present study, interferon-α, similar to FSK and RIF, was highly potent in inducing the expression of ABCB1 in the bovine blastocysts but did not exhibit an additive effect with FSK and RIF. Bovine blastocysts stimulated by the combined treatment with FSK, RIF, and interferon-α to express high levels of ABCB1 displayed better freezing resistance as indicated by higher cell numbers in post thawing cultures. On transfer to recipients, such embryos established pregnancies with significantly higher frequencies in repeat breeder cows rather than normal ones.

The efficacy of the well of the well (WOW) culture system on development of bovine embryos in a small group and the effect of number of adjacent embryos on their development

The aim of the present study was to clarify the efficacy of the well of the well (WOW) culture system for a small number of embryos and the effect of number of adjacent embryos in a WOW dish on blastocyst development. In conventional droplet culture, embryos in the small-number group (5-6 embryos/droplet) showed low blastocyst development compared with a control group (25-26 embryos/droplet). However, small and large numbers of embryos (5-6 and 25 embryos, respectively) in a WOW dish showed no significant differences in cleavage, blastocyst rates, and mean cell number in blastocysts compared with the control group (25-30 embryos/droplet). In addition, the number of adjacent embryos in a WOW dish did not affect the development to blastocysts and cell number in blastocysts. In conclusion, a WOW dish can provide high and stable blastocyst development in small group culture wherever embryos are placed in microwells of the WOW dish.

Identification of bovine embryos cultured in groups by attachment of barcodes to the zona pellucida

The low number of oocytes collected from unstimulated donors by ovum pick-up means that embryos produced from each individual female have to be cultured individually or in very small groups. However, it has been demonstrated that single-embryo culture is less efficient than embryo culture in groups. To overcome this limitation, we developed a direct embryo-tagging system, which allows the collective culture of embryos from different origins whilst preserving their pedigree. Presumptive bovine zygotes were tagged with eight wheat-germ agglutinin biofunctionalised polysilicon barcodes attached to the outer surface of the zona pellucida (ZP). Four different barcodes were used to encode groups of 20–25 embryos, which were then cultured in the same drop. Cleavage, Day-7 and Day-8 blastocysts and barcode retention rates were assessed. In addition, Day-7 blastocysts were vitrified and warmed. Barcode attachment to the ZP of bovine embryos affected neither in vitro embryo development nor post-warming survival of the tagged embryos. All the embryos maintained barcodes attached until Day 8 of culture (3.63 ± 0.37 barcodes per embryo) and could be identified. In conclusion, identification of embryos by barcodes attached to the ZP is feasible and will allow the culture of embryos from different donors in the same drop.

Biomolecule screening for efficient attachment of biofunctionalized microparticles to the zona pellucida of mammalian oocytes and embryos

Individual tagging of oocytes and embryos through the attachment of micrometer-sized polysilicon barcodes to their zona pellucida (ZP) is a promising approach to ensure their correct identification and traceability in human assisted reproduction and in animal production programs. To provide barcodes with the capacity of binding to the ZP, they must be first biofunctionalized with a biomolecule capable of binding to the ZP of both oocytes and embryos. The aim of this work was to select, among an anti-ZP2 antibody and the two lectins wheat germ agglutinin (WGA) and phytohemagglutinin-L, the most optimal biomolecule for the eventual biofunctionalization of barcodes, using mouse oocytes and embryos and commercially available microspheres as a model. Despite the anti-ZP2 antibody showed the highest number of binding sites onto the ZP surface, as determined by field emission scanning electron microscopy, the binding of anti-ZP2-biofunctionalized microspheres to the ZP of cultured oocytes and embryos was less robust and less stable than the binding of lectin-biofunctionalized ones. WGA proved to be, among the three candidates tested, the most appropriate biomolecule to biofunctionalize microparticles with the aim to attach them to the ZP of both oocytes and embryos and to maintain them attached through oocyte activation (zona reaction) and in vitro culture up to the blastocyst stage. As saccharides recognized by WGA are highly abundant in the ZP of most mammalian species, WGA-biofuncionalized microparticles would be able to attach to the ZP of oocytes/embryos of species other than the mouse, such as humans and farm animals.

Beneficial effect of two culture systems with small groups of embryos on the development and quality of in vitro-produced bovine embryos

Currently, in vitro-produced embryos derived by ovum pick up (OPU) and in vitro fertilization (IVF) technologies represent approximately one-third of the embryos worldwide in cattle. Nevertheless, the culture of small groups of embryos from an individual egg donor is an issue that OPU-IVF laboratories have to face. In this work, we tested whether the development and quality of the preimplantation embryos in vitro cultured in low numbers (five embryos) could be improved by the addition of epidermal growth factor, insulin, transferrin and selenium (EGF-ITS) or by the WOW system. With this aim, immature oocytes recovered from slaughtered heifers were in vitro matured and in vitro fertilized. Presumptive zygotes were then randomly cultured in four culture conditions: one large group (LG) (50 embryos/500 μl medium) and three smaller groups [five embryos/50 μl medium without (control) or with EGF-ITS (EGF-ITS) and five embryos per microwell in the WOW system (WOW)]. Embryos cultured in LG showed a greater ability to develop to blastocyst stage than embryos cultured in smaller groups, while the blastocyst rate of WOW group was significantly higher than in control. The number of cells/blastocyst in LG was higher than control or WOW, whereas the apoptosis rate per blastocyst was lower. On the other hand, the addition of EGF-ITS significantly improved both parameters compared to the control and resulted in similar embryo quality to LG. In conclusion, the WOW system improved embryo development, while the addition of EGF-ITS improved the embryo quality when smaller groups of embryos were cultured.

Effect of embryo density on in vitro development and gene expression in bovine in vitro-fertilized embryos cultured in a microwell system

To identify embryos individually during in vitro development, we previously developed the well-of-the-well (WOW) dish, which contains 25 microwells. Here we investigated the effect of embryo density (the number of embryos per volume of medium) on in vitro development and gene expression of bovine in vitro-fertilized embryos cultured in WOW dishes. Using both conventional droplet and WOW culture formats, 5, 15, and 25 bovine embryos were cultured in 125 µl medium for 168 h. The blastocysts at Day 7 were analyzed for number of cells and expression of ten genes (CDX2, IFN-tau, PLAC8, NANOG, OCT4, SOX2, AKR1B1, ATP5A1, GLUT1 and IGF2R). In droplet culture, the rates of formation of >4-cell cleavage embryos and blastocysts were significantly lower in embryos cultured at 5 embryos per droplet than in those cultured at 15 or 25 embryos per droplet, but not in WOW culture. In both droplet and WOW culture, developmental kinetics and blastocyst cell numbers did not differ among any groups. IFN-tau expression in embryos cultured at 25 embryos per droplet was significantly higher than in those cultured at 15 embryos per droplet and in artificial insemination (AI)-derived blastocysts. Moreover, IGF2R expression was significantly lower in the 25-embryo group than in the 5-embryo group and in AI-derived blastocysts. In WOW culture, these expressions were not affected by embryo density and were similar to those in AI-derived blastocysts. These results suggest that, as compared with conventional droplet culture, in vitro development and expression of IFN-tau and IGF2R in the microwell system may be insensitive to embryo density.

Oxidative phosphorylation-linked respiration in individual bovine oocytes

Mitochondrial bioenergetics in mammalian oocytes has not been sufficiently characterized. In this study, the function of oxidative phosphorylation (OXPHOS), a major pathway in mitochondria, was investigated in individual bovine oocytes by monitoring oxygen consumption using modified scanning electrochemical microscopy (SECM). At the germinal vesicle (GV) stage, 65% of basal respiration was used for mitochondrial respiration, which was inhibited by complex IV inhibitor. Around 63% of mitochondrial respiration was coupled to ATP synthesis, as determined by sensitivity to an ATP synthase inhibitor, and the remaining 37% was attributed to proton leak. In contrast, 50% and 43% of mitochondrial respiration were used for ATP synthesis in in vivo- and in vitro-derived metaphase II (MII)-stage oocytes, respectively. ATP-linked respiration, in both in vivo- and in vitro-derived MII-stage oocytes, was significantly lower than in GV-stage oocytes, suggesting that OXPHOS in bovine oocytes is more active at the GV stage compared with the MII stage. Interestingly, basal respiration in in vitro-derived MII oocytes was significantly higher than for in vivo-derived oocytes, reflecting an increase in proton leak. Next, we assessed respiration in MII oocytes cultured for 8 h. The aged oocytes had a significantly reduced maximum respiratory capacity, which was stimulated by a mitochondrial uncoupler, and reduced ATP-linked respiration compared with non-aged oocytes. However, the aging-related phenomenon could be prevented by caffeine treatment. We conclude that OXPHOS in bovine oocytes varies in the transition from GV to MII stage, in vitro maturation and the aging process. This approach will be particularly useful for analyzing mitochondrial bioenergetics in individual mammalian oocytes.

Promising system for selecting healthy in vitro-fertilized embryos in cattle

Conventionally, in vitro–fertilized (IVF) bovine embryos are morphologically evaluated at the time of embryo transfer to select those that are likely to establish a pregnancy. This method is, however, subjective and results in unreliable selection. Here we describe a novel selection system for IVF bovine blastocysts for transfer that traces the development of individual embryos with time-lapse cinematography in our developed microwell culture dish and analyzes embryonic metabolism. The system can noninvasively identify prognostic factors that reflect not only blastocyst qualities detected with histological, cytogenetic, and molecular analysis but also viability after transfer. By assessing a combination of identified prognostic factors—(i) timing of the first cleavage; (ii) number of blastomeres at the end of the first cleavage; (iii) presence or absence of multiple fragments at the end of the first cleavage; (iv) number of blastomeres at the onset of lag-phase, which results in temporary developmental arrest during the fourth or fifth cell cycle; and (v) oxygen consumption at the blastocyst stage—pregnancy success could be accurately predicted (78.9%). The conventional method or individual prognostic factors could not accurately predict pregnancy. No newborn calves showed neonatal overgrowth or death. Our results demonstrate that these five predictors and our system could provide objective and reliable selection of healthy IVF bovine embryos.

Effect of culture medium volume and embryo density on early mouse embryonic development: tracking the development of the individual embryo

PURPOSE

To determine the optimal volume or density of embryos for the well-of-the-well (WOW) system in order to track the development of individual embryos and to determine whether the WOW system can reverse the negative impact of culturing embryos singly.

METHODS

(1) Mouse embryos (groups of nine at the 2-cell stage) were cultured in 6.25 μl, 12.50 μl, 25.00 μl and 50.00 μl of droplets of culture medium under paraffin oil; (2) Groups of three, six, nine and twelve embryos at the 2-cell stage were cultured in 50 μl of droplet of culture medium under paraffin oil; (3) Groups of nine embryos at the 2-cell stage were cultured in 50 μl of droplet under paraffin oil with or without nine micro-wells made on the bottom of the Petri dish into each of which were placed one of the nine embryos (WOW system). Also single 2-cell stage embryos was cultured individually in 5.5 μl of droplet of culture medium under paraffin oil with or without a single micro-well made on the bottom of the Petri dish (WOW system for single culture). At the end of culture, the percentages of blastocyst development, hatching and hatched blastocysts were compared in each group. The blastocysts were fixed for differential staining.

RESULTS

The blastocyst development was significantly higher (P < 0.05) when nine embryos were cultured in 50 μl of droplet of culture medium compared with other volumes. The blastocyst development was significantly reduced (P < 0.05) in single embryo culture compared to group embryo culture with or without the WOW system. The blastocyst development was not improved when single embryo cultured individually in a micro-well was compared to single embryo cultured individually without micro-well. The total cell numbers of blastocysts were significantly higher in group embryo culture than single embryo culture regardless of whether the WOW system was used. In addition, the total cell numbers of blastocysts were significantly higher (P < 0.05) in single embryo culture with the WOW system than without.

CONCLUSIONS

Group embryo culture is superior to single embryo culture for blastocyst development. The WOW system with 50 μl of droplet of culture medium can be used to track the individual development of embryo cultured in groups while preserving good embryonic development. The reduced embryonic development with single embryo culture cannot be ameliorated by the WOW system.

Rethinking in vitro embryo culture: new developments in culture platforms and potential to improve assisted reproductive technologies

The preponderance of research toward improving embryo development in vitro has focused on manipulation of the chemical soluble environment, including altering basic salt composition, energy substrate concentration, amino acid makeup, and the effect of various growth factors or addition or subtraction of other supplements. In contrast, relatively little work has been done examining the physical requirements of preimplantation embryos and the role culture platforms or devices can play in influencing embryo development within the laboratory. The goal of this review is not to reevaluate the soluble composition of past and current embryo culture media, but rather to consider how other controlled and precise factors such as time, space, mechanical interactions, gradient diffusions, cell movement, and surface interactions might influence embryo development. Novel culture platforms are being developed as a result of interdisciplinary collaborations between biologists and biomedical, material, chemical, and mechanical engineers. These approaches are looking beyond the soluble media composition and examining issues such as media volume and embryo spacing. Furthermore, methods that permit precise and regulated dynamic embryo culture with fluid flow and embryo movement are now available, and novel culture surfaces are being developed and tested. While several factors remain to be investigated to optimize the efficiency of embryo production, manipulation of the embryo culture microenvironment through novel devices and platforms may offer a pathway toward improving embryo development within the laboratory of the future.

Culture systems: embryo density

Embryo density is defined as the embryo-to-volume ratio achieved during in vitro culture; in other words, it is the number of embryos in a defined volume of culture medium. The same density can be achieved by manipulating either the number of embryos in a given volume of medium, or manipulating the volume of the medium for a given number of embryos: for example, a microdrop with five embryos in a 50 μl volume under oil has the same embryo-to-volume ratio (1:10 μl) as a microdrop with one embryo in a 10 μl volume under oil (1:10 μl). Increased embryo density can improve mammalian embryo development in vitro; however, the mechanism(s) responsible for this effect may be different with respect to which method is used to increase embryo density.Standard, flat sterile plastic petri dishes are the most common, traditional platform for embryo culture. Microdrops under a mineral oil overlay can be prepared to control embryo density, but it is critical that dish preparation is consistent, where appropriate techniques are applied to prevent microdrop dehydration during preparation, and results of any data collection are reliable, and repeatable. There are newer dishes available from several manufacturers that are specifically designed for embryo culture; most are readily available for use with human embryos. The concept behind these newer dishes relies on fabrication of conical and smaller volume wells into the dish design, so that embryos rest at the lowest point in the wells, and where putative embryotrophic factors may concentrate.Embryo density is not usually considered by the embryologist as a technique in and of itself; rather, the decision to culture embryos in groups or individually is protocol-driven, and is based more on convenience or the need to collect data on individual embryos. Embryo density can be controlled, and as such, it can be utilized as a simple, yet effective tool to improve in vitro development of human embryos.

Advances in embryo culture platforms: novel approaches to improve preimplantation embryo development through modifications of the microenvironment

BACKGROUND

The majority of research aimed at improving embryo development in vitro has focused on manipulation of the chemical environment, examining details such as energy substrate composition and impact of various growth factors or other supplements. In comparison, relatively little work has been done examining the physical requirements of preimplantation embryos and the role culture platforms or devices can play in influencing embryo development.

METHODS

Electronic searches were performed using keywords centered on embryo culture techniques using PUBMED through June 2010 and references were searched for additional research articles.

RESULTS

Various approaches to in vitro embryo culture that involve manipulations of the physical culture environment are emerging. Novel culture platforms being developed examine issues such as media volume and embryo spacing. Furthermore, methods to permit dynamic embryo culture with fluid flow and embryo movement are now available, and novel culture surfaces are being tested.

CONCLUSIONS

Although several factors remain to be studied to optimize efficiency, manipulations of the embryo culture microenvironment through novel culture devices may offer a means to improve embryo development in vitro. Reduced volume systems that reduce embryo spacing, such as the well-of-the-well approach, appear beneficial, although more work is needed to verify the source of their true benefit in human embryos. Emerging microfluidic technology appears to be a promising approach. However, along with the work on specialized culture surfaces, more information is required to determine the impact on human embryo development.