Distinct signals in human immunodeficiency virus type 1 Pr55 necessary for RNA binding and particle formation

Tagging the human immunodeficiency virus gag protein with green fluorescent protein. Minimal evidence for colocalisation with actin

The assembly and budding of human immunodeficiency virus type 1, encoded solely in the Gag protein precursor Pr55Gag, occur at the plasma membrane of infected cells. However, little is known about the routing of the Gag molecule from its site of synthesis in the cytoplasm to the site of budding, with past studies suggesting that the cytoskeleton, particularly actin, may be involved in the translocation. We have constructed a T7 promoter-driven gag gene fusion with green fluorescent protein (GFP) that expresses Gag-GFP in both cells and supernatant. The distribution of Gag-GFP was the same as Gag only, suggesting that cellular routing was not affected by fusion to GFP, and using colabelling techniques, Gag-GFP was shown to have no particular colocalisation with actin. After detergent extraction of expressing cells, Gag and Gag-GFP remained cell associated, whereas GFP only was wholly released. These data suggest that Gag may associate with other cytoskeletal components or, perhaps more likely, that a partial assembly to a large-molecular-weight intermediate occurs before localisation at the plasma membrane.

Structural biology of HIV

The human immunodeficiency virus (HIV) genome encodes a total of three structural proteins, two envelope proteins, three enzymes, and six accessory proteins. Studies over the past ten years have provided high-resolution three-dimensional structural information for all of the viral enzymes, structural proteins and envelope proteins, as well as for three of the accessory proteins. In some cases it has been possible to solve the structures of the intact, native proteins, but in most cases structural data were obtained for isolated protein domains, peptidic fragments, or mutants. Peptide complexes with two regulatory RNA fragments and a protein complex with an RNA recognition/encapsidation element have also been structurally characterized. This article summarizes the high-resolution structural information that is currently available for HIV proteins and reviews current structure-function and structure-biological relationships.

Virus maturation by budding

Enveloped viruses mature by budding at cellular membranes. It has been generally thought that this process is driven by interactions between the viral transmembrane proteins and the internal virion components (core, capsid, or nucleocapsid). This model was particularly applicable to alphaviruses, which require both spike proteins and a nucleocapsid for budding. However, genetic studies have clearly shown that the retrovirus core protein, i.e., the Gag protein, is able to form enveloped particles by itself. Also, budding of negative-strand RNA viruses (rhabdoviruses, orthomyxoviruses, and paramyxoviruses) seems to be accomplished mainly by internal components, most probably the matrix protein, since the spike proteins are not absolutely required for budding of these viruses either. In contrast, budding of coronavirus particles can occur in the absence of the nucleocapsid and appears to require two membrane proteins only. Biochemical and structural data suggest that the proteins, which play a key role in budding, drive this process by forming a three-dimensional (cage-like) protein lattice at the surface of or within the membrane. Similarly, recent electron microscopic studies revealed that the alphavirus spike proteins are also engaged in extensive lateral interactions, forming a dense protein shell at the outer surface of the viral envelope. On the basis of these data, we propose that the budding of enveloped viruses in general is governed by lateral interactions between peripheral or integral membrane proteins. This new concept also provides answers to the question of how viral and cellular membrane proteins are sorted during budding. In addition, it has implications for the mechanism by which the virion is uncoated during virus entry.

The role of nucleocapsid of HIV-1 in virus assembly

The role of the nucleocapsid protein of HIV-1 Gag in virus assembly was investigated using Gag truncation mutants, a nucleocapsid deletion mutant, and point mutations in the nucleocapsid region of Gag, in transfected COS cells, and in stable T-cell lines. Consistent with previous investigations, a truncation containing only the matrix and capsid regions of Gag was unable to assemble efficiently into particles; also, the pelletable material released was lighter than the density of wild-type HIV-1. A deletion mutant lacking p7 nucleocapsid but containing the C-terminal p6 protein was also inefficient in particle release and released lighter particles, while a truncation containing only the first zinc finger of p7 could assemble more efficiently into virions. These results clearly show that p7 is indispensable for virus assembly and release. Some point mutations in the N-terminal basic domain and in the basic linker region between the two zinc fingers, which had been previously shown to have reduced RNA binding in vitro [Schmalzbauer, E., Strack, B., Dannull, J., Guehmann, S., and Moelling, K. (1996). J. Virol. 70: 771-777], were shown to reduce virus assembly dramatically when expressed in full-length viral clones. A fusion protein consisting of matrix and capsid fused to a heterologous viral protein known to have nonspecific RNA binding activity [Ribas, J. C., Fujimura, T., and Wickner, R. B. (1994) J. Biol. Chem. 269: 28420-28428] released pelletable material slightly more efficiently than matrix and capsid alone, and these particles had density higher than matrix and capsid alone. These results demonstrate the essential role of HIV-1 nucleocapsid in the virus assembly process and show that the positively charged N terminus of p7 is critical for this role.

HIV-1 gag proteins: diverse functions in the virus life cycle

The Gag proteins of HIV-1, like those of other retroviruses, are necessary and sufficient for the assembly of virus-like particles. The roles played by HIV-1 Gag proteins during the life cycle are numerous and complex, involving not only assembly but also virion maturation after particle release and early postentry steps in virus replication. As the individual Gag domains carry out their diverse functions, they must engage in interactions with themselves, other Gag proteins, other viral proteins, lipid, nucleic acid (DNA and RNA), and host cell proteins. This review briefly summarizes our current understanding of how HIV-1 Gag proteins function in the virus life cycle.

Importance of basic residues in the nucleocapsid sequence for retrovirus Gag assembly and complementation rescue

The Gag proteins of Rous sarcoma virus (RSV) and human immunodeficiency virus (HIV) contain small interaction (I) domains within their nucleocapsid (NC) sequences. These overlap the zinc finger motifs and function to provide the proper density to viral particles. There are two zinc fingers and at least two I domains within these Gag proteins. To more thoroughly characterize the important sequence features and properties of I domains, we analyzed Gag proteins that contain one or no zinc finger motifs. Chimeric proteins containing the amino-terminal half of RSV Gag and various portions of the carboxy terminus of murine leukemia virus (MLV) (containing one zinc finger) Gag had only one I domain, whereas similar chimeras with human foamy virus (HFV) (containing no zinc fingers) Gag had at least two. Mutational analysis of the MLV NC sequence and inspection of I domain sequences within the zinc-fingerless C terminus of HFV Gag suggested that clusters of basic residues, but not the zinc finger motif residues themselves, are required for the formation of particles of proper density. In support of this, a simple string of strongly basic residues was found to be able to substitute for the RSV I domains. We also explored the possibility that differences in I domains (e.g., their number) account for differences in the ability of Gag proteins to be rescued into particles when they are unable to bind to membranes. Previously published experiments have shown that such membrane-binding mutants of RSV and HIV (two I domains) can be rescued but that those of MLV (one I domain) cannot. Complementation rescue experiments with RSV-MLV chimeras now map this difference to the NC sequence of MLV. Importantly, the same RSV-MLV chimeras could be rescued by complementation when the block to budding was after, rather than before, transport to the membrane. These results suggest that MLV Gag molecules begin to interact at a much later time after synthesis than those of RSV and HIV.

Analysis of minimal human immunodeficiency virus type 1 gag coding sequences capable of virus-like particle assembly and release

We have constructed a series of human immunodeficiency virus (HIV) gag mutants by progressive truncation of the gag coding sequence from the C terminus and have combined these mutants with an assembly-competent matrix domain deletion mutation (DeltaMA). By using several methods, the particle-producing capabilities of each mutant were examined. Our analysis indicated that truncated Gag precursors lacking most of C-terminal gag gene products assembled and were released from 293T cells. Additionally, a mutant with a combined deletion of the MA (DeltaMA) and p6 domains even produced particles at levels comparable to that of the wild-type (wt) virus. However, most mutants derived from combination of the DeltaMA and the C-terminal truncation mutations did not release particles as well as the wt. Our smallest HIV gag gene product capable of virus-like particle formation was a 28-kDa protein which consists of a few MA amino acids and the CA-p2 domain. Sucrose density gradient fractionation analysis indicated that most mutants exhibited a wt retrovirus particle density. Exceptions to this rule were mutants with an intact MA domain but deleted downstream of the p2 domains. These C-terminal truncation mutants possessed particle densities of 1.13 to 1.15 g/ml, lower than that of the wt. The N-terminal portions of the CA domain, which have been shown to be dispensable for core assembly, became critical when most of the MA domain was deleted, suggesting a requirement for an intact CA domain to assemble and release particles.

Expression and purification of HIV-I p15NC protein in Escherichia coli

An efficient method for the expression and purification of nucleocapsid precursor protein (p15NC) from HIV-I (BH 10 isolate) was developed and used to obtain large quantities of this viral protein for structural studies, protein biochemistry, and high-throughput screening efforts. We have engineered an existing p15NC clone into a new vector developed at the University of Heidelberg, Germany. Using PCR, we introduced new restriction sites and a strong ribosome-binding site in the p15NC gene and expressed authentic p15NC protein. Our protocol enabled us to rapidly obtain soluble and highly stable p15NC expressed in Escherichia coli and to purify several milligrams of p15NC to homogeneity. In the current purification scheme, lysis of cell paste followed by a simple three-step FPLC procedure yields about 0.4-0.5 mg of purified p15NC per gram of E. coli cell paste expressing the protein with an overall yield of 45%. The purified p15NC retained its ability to bind full-length HIV-I p15NC mRNA in solution- or solid-phase-based assays. A specific stem-loop forming RNA fragment (24-mer) and its antisense DNA oligomer (21-mer) derived from the full-length p15NC mRNA were also able to bind to p15NC. In addition, antisense DNA oligos with bulky 5-iodouracil and 5-iodocytidine substituents were able to bind to p15NC with little or no perturbations as assessed by their ability to compete with the full-length p15NC mRNA in filter-binding competition assays. In addition, RNA-dependent cleavage of the purified p15NC in vitro by HIV-I protease occurred at rates similar to those reported previously.

Detection of a trimeric human immunodeficiency virus type 1 Gag intermediate is dependent on sequences in the matrix protein, p17

Previous studies have shown that single amino acid changes in the amino-terminal matrix (MA) domain, p17, of the human immunodeficiency virus type 1 Gag precursor Pr55, can abrogate virion particle assembly. In the three-dimensional structure of MA such mutations lie in a single helix spanning residues 54 to 68, suggesting a key role for this helix in the assembly process. The fundamental nature of this involvement, however, remains poorly understood. In the present study, the essential features of the MA helix required for virus assembly have been investigated through the analysis of a further 15 site-directed mutants. With previous mutants that failed to assemble, residues mapped as critical for assembly were all located on the hydrophobic face of the helix and had a key role in stabilizing the trimeric interface. This implies a role for the MA trimer in virus assembly. We support this interpretation by showing that purified MA is trimeric in solution and that mutations that prevent virus assembly also prevent trimerization. Trimerization in solution was also a property of a larger MA-capsid (CA) Gag molecule, while under the same conditions CA only was a monomer. These data suggest that Gag trimerization driven by the MA domain is an intermediate stage in normal virion assembly and that it relies, in turn, on an MA conformation dependent on the hydrophobic core of the molecule.

Morphopoietic determinants of HIV-1 Gag particles assembled in baculovirus-infected cells

The determinants for HIV-1 particle morphology were investigated using various deletion and insertion mutants of the Gap precursor protein (Gag) expressed in baculovirus-infected cells and ultrastructural analysis of membrane-enveloped Gag particles under the electron microscope. Five discrete regions were found to influence the size, the variability in dimension, and the sphericity of the particles: (i) the matrix (MA) N-terminal domain, within residues 10-21, the junctions of (ii) MA-CA (capsid), (iii) CA-spacer peptide SP1 and (iv) nucleocapsid (NC)-SP2, and (v) the p6gag C-terminus. Internal regions (ii), (iii), and (iv) contained HIV-1 protease cleavage sites separating major structural domains. No particle assembly was observed for am276, a MA-CA polyprotein mutant lacking the C-terminal third of the CA domain. However, MA-CA domains including the MHR (residues 277-306), or downstream sequence to CA residue 357, resulted in the assembly into tubular or filamentous structures, suggesting a helical symmetry of Gag packing. Mutant amb374, derived from amb 357 by further addition of the heptadecapeptide motif HKARVLAEAMSQVTNSA, overlapping the CA-SP1 junction and the SP1 domain, showed a drastic change in the pattern of Gag assembly, compared to amb357, with formation of spherical particles. These data suggested a novel function for the spacer domain SP1, acting as a spherical shape determinant of the Gag particle which would negatively affect the helical symmetry of assembly of the Gag precursor molecules conferred by the MHR and the downstream CA sequence, within residues 307-357.

N-Terminal extension of human immunodeficiency virus capsid protein converts the in vitro assembly phenotype from tubular to spherical particles

Expression of retroviral Gag polyproteins is sufficient for morphogenesis of virus-like particles with a spherical immature protein shell. Proteolytic cleavage of Gag into the matrix (MA), capsid (CA), nucleocapsid (NC), and p6 domains (in the case of human immunodeficiency virus [HIV]) leads to condensation to the mature cone-shaped core. We have analyzed the formation of spherical or cylindrical particles on in vitro assembly of purified HIV proteins or inside Escherichia coli cells. CA protein alone yielded cylindrical particles, while all N-terminal extensions of CA abolished cylinder formation. Spherical particles with heterogeneous diameters or amorphous protein aggregates were observed instead. Extending CA by 5 amino acids was sufficient to convert the assembly phenotype to spherical particles. Sequences C-terminal of CA were not required for sphere formation. Proteolytic cleavage of N-terminally extended CA proteins prior to in vitro assembly led to the formation of cylindrical particles, while proteolysis of in vitro assembly products caused disruption of spheres but not formation of cylinders. In vitro assembly of CA and extended CA proteins in the presence of cyclophilin A (CypA) at a CA-to-CypA molar ratio of 10:1 yielded significantly longer cylinders and heterogeneous spheres, while higher concentrations of CypA completely disrupted particle formation. We conclude that the spherical shape of immature HIV particles is determined by the presence of an N-terminal extension on the CA domain and that core condensation during virion maturation requires the liberation of the N terminus of CA.

Particle size determinants in the human immunodeficiency virus type 1 Gag protein

The retroviral Gag protein plays the central role in the assembly process and can form membrane-enclosed, virus-like particles in the absence of any other viral products. These particles are similar to authentic virions in density and size. Three small domains of the human immunodeficiency virus type 1 (HIV-1) Gag protein have been previously identified as being important for budding. Regions that lie outside these domains can be deleted without any effect on particle release or density. However, the regions of Gag that control the size of HIV-1 particles are less well understood. In the case of Rous sarcoma virus (RSV), the size determinant maps to the CA (capsid) and adjacent spacer sequences within Gag, but systematic mapping of the HIV Gag protein has not been reported. To locate the size determinants of HIV-1, we analyzed a large collection of Gag mutants. To our surprise, all mutants with defects in the MA (matrix), CA, and the N-terminal part of NC (nucleocapsid) sequences produced dense particles of normal size, suggesting that oncoviruses (RSV) and lentiviruses (HIV-1) have different size-controlling elements. The most important region found to be critical for determining HIV-1 particle size is the p6 sequence. Particles lacking all or small parts of p6 were uniform in size distribution but very large as measured by rate zonal gradients. Further evidence for this novel function of p6 was obtained by placing this sequence at the C terminus of RSV CA mutants that produce heterogeneously sized particles. We found that the RSV-p6 chimeras produced normally sized particles. Thus, we present evidence that the entire p6 sequence plays a role in determining the size of a retroviral particle.

The molecular basis of HIV capsid assembly

In common with many aspects of the HIV life cycle, the assembly of the virus particle has been the subject of intense investigation over recent years. Study of the subject is facilitated by the fact that only a single gene product, the Pr55 Gag protein, is required for virus assembly. A combination of site directed mutagenesis, biochemical characterisation and structural studies have led to a picture of the overall architecture of the particle, the partial structure of Pr55, and the subdomains involved in oligomerisation. Copyright 1998 John Wiley & Sons, Ltd.

The I domain is required for efficient plasma membrane binding of human immunodeficiency virus type 1 Pr55Gag

The interaction of the human immunodeficiency virus type 1 (HIV-1) Pr55Gag molecule with the plasma membrane of an infected cell is an essential step of the viral life cycle. Myristic acid and positively charged residues within the N-terminal portion of MA constitute the membrane-binding domain of Pr55Gag. A separate assembly domain, termed the interaction (I) domain, is located nearer the C-terminal end of the molecule. The I domain is required for production of dense retroviral particles, but has not previously been described to influence the efficiency of membrane binding or the subcellular distribution of Gag. This study used a series of Gag-green fluorescent protein fusion constructs to define a region outside of MA which determines efficient plasma membrane interaction. This function was mapped to the nucleocapsid (NC) region of Gag. The minimal region in a series of C-terminally truncated Gag proteins conferring plasma membrane fluorescence was identified as the N-terminal 14 amino acids of NC. This same region was sufficient to create a density shift in released retrovirus-like particles from 1.13 to 1.17 g/ml. The functional assembly domain previously termed the I domain is thus required for the efficient plasma membrane binding of Gag, in addition to its role in determining the density of released particles. We propose a model in which the I domain facilitates the interaction of the N-terminal membrane-binding domain of Pr55Gag with the plasma membrane.

Sequential steps in human immunodeficiency virus particle maturation revealed by alterations of individual Gag polyprotein cleavage sites

Retroviruses are produced as immature particles containing structural polyproteins, which are subsequently cleaved by the viral proteinase (PR). Extracellular maturation leads to condensation of the spherical core to a capsid shell formed by the capsid (CA) protein, which encases the genomic RNA complexed with nucleocapsid (NC) proteins. CA and NC are separated by a short spacer peptide (spacer peptide 1 [SP1]) on the human immunodeficiency virus type 1 (HIV-1) Gag polyprotein and released by sequential PR-mediated cleavages. To assess the role of individual cleavages in maturation, we constructed point mutations abolishing cleavage at these sites, either alone or in combination. When all three sites between CA and NC were mutated, immature particles containing stable CA-NC were observed, with no apparent effect on other cleavages. Delayed maturation with irregular morphology of the ribonucleoprotein core was observed when cleavage of SP1 from NC was prevented. Blocking the release of SP1 from CA, on the other hand, yielded normal condensation of the ribonucleoprotein core but prevented capsid condensation. A thin, electron-dense layer near the viral membrane was observed in this case, and mutant capsids were significantly less stable against detergent treatment than wild-type HIV-1. We suggest that HIV maturation is a sequential process controlled by the rate of cleavage at individual sites. Initial rapid cleavage at the C terminus of SP1 releases the RNA-binding NC protein and leads to condensation of the ribonucleoprotein core. Subsequently, CA is separated from the membrane by cleavage between the matrix protein and CA, and late release of SP1 from CA is required for capsid condensation.

Proteolytic refolding of the HIV-1 capsid protein amino-terminus facilitates viral core assembly

After budding, the human immunodeficiency virus (HIV) must 'mature' into an infectious viral particle. Viral maturation requires proteolytic processing of the Gag polyprotein at the matrix-capsid junction, which liberates the capsid (CA) domain to condense from the spherical protein coat of the immature virus into the conical core of the mature virus. We propose that upon proteolysis, the amino-terminal end of the capsid refolds into a beta-hairpin/helix structure that is stabilized by formation of a salt bridge between the processed amino-terminus (Pro1) and a highly conserved aspartate residue (Asp51). The refolded amino-terminus then creates a new CA-CA interface that is essential for assembling the condensed conical core. Consistent with this model, we found that recombinant capsid proteins with as few as four matrix residues fused to their amino-termini formed spheres in vitro, but that removing these residues refolded the capsid amino-terminus and redirected protein assembly from spheres to cylinders. Moreover, point mutations throughout the putative CA-CA interface blocked capsid assembly in vitro, core assembly in vivo and viral infectivity. Disruption of the conserved amino-terminal capsid salt bridge also abolished the infectivity of Moloney murine leukemia viral particles, suggesting that lenti- and oncoviruses mature via analogous pathways.

Nucleocapsid and matrix protein contributions to selective human immunodeficiency virus type 1 genomic RNA packaging

The nucleocapsid protein (NC) of retroviruses plays a major role in genomic RNA packaging, and some evidence has implicated the matrix protein (MA) of certain retroviruses in viral RNA binding. To further investigate the role of NC in the selective recognition of genomic viral RNA and to address the potential contribution of MA in this process, we constructed chimeric and deletion human immunodeficiency virus type 1 (HIV-1) mutants that alter the NC or MA protein. Both HIV and mouse mammary tumor virus (MMTV) NC proteins have two zinc-binding domains and similar basic amino acid compositions but differ substantially in total length, amino acid sequence, and spacing of the zinc-binding motifs. When the entire NC coding sequence of HIV was replaced with the MMTV NC coding sequence, we found that the HIV genome was incorporated into virions at 50% of wild-type levels. Viruses produced from chimeric HIV genomes with complete NC replacements, or with the two NC zinc-binding domains replaced with MMTV sequences, preferentially incorporated HIV genomes when both HIV and MMTV genomes were simultaneously present in the cell. Viruses produced from chimeric MMTV genomes in which the MMTV NC had been replaced with HIV NC preferentially incorporated MMTV genomes when both HIV and MMTV genomes were simultaneously present in the cell. In contrast, viruses produced from chimeric HIV genomes containing the Moloney NC, which contains a single zinc-binding motif, were previously shown to preferentially incorporate Moloney genomic RNA. Taken together, these results indicate that an NC protein with two zinc-binding motifs is required for specific HIV RNA packaging and that the amino acid context of these motifs, while contributing to the process, is less crucial for specificity. The data also suggest that HIV NC may not be the exclusive determinant of RNA selectivity. Analysis of an HIV MA mutant revealed that specific RNA packaging does not require MA protein.

Distinct functions and requirements for the Cys-His boxes of the human immunodeficiency virus type 1 nucleocapsid protein during RNA encapsidation and replication

The process of retroviral RNA encapsidation involves interaction between trans-acting viral proteins and cis-acting RNA elements. The encapsidation signal on human immunodeficiency virus type 1 (HIV-1) RNA is a multipartite structure composed of functional stem-loop structures. The nucleocapsid (NC) domain of the Gag polyprotein precursor contains two copies of a Cys-His box motif that have been demonstrated to be important in RNA encapsidation. To further characterize the role of the Cys-His boxes of the HIV-1 NC protein in RNA encapsidation, the relative efficiency of RNA encapsidation for virus particles that contained mutations within the Cys-His boxes was measured. Mutations that disrupted the first Cys-His box of the NC protein resulted in virus particles that encapsidated genomic RNA less efficiently and subgenomic RNA more efficiently than did wild-type virus. Mutations within the second Cys-His box did not significantly affect RNA encapsidation. In addition, a full complement of wild-type NC protein in virus particles is not required for efficient RNA encapsidation or virus replication. Finally, both Cys-His boxes of the NC protein play additional roles in virus replication.

Structure of the carboxyl-terminal dimerization domain of the HIV-1 capsid protein

The carboxyl-terminal domain, residues 146 to 231, of the human immunodeficiency virus-1 (HIV-1) capsid protein [CA(146-231)] is required for capsid dimerization and viral assembly. This domain contains a stretch of 20 residues, called the major homology region (MHR), which is conserved across retroviruses and is essential for viral assembly, maturation, and infectivity. The crystal structures of CA(146-231) and CA(151-231) reveal that the globular domain is composed of four helices and an extended amino-terminal strand. CA(146-231) dimerizes through parallel packing of helix 2 across a dyad. The MHR is distinct from the dimer interface and instead forms an intricate hydrogen-bonding network that interconnects strand 1 and helices 1 and 2. Alignment of the CA(146-231) dimer with the crystal structure of the capsid amino-terminal domain provides a model for the intact protein and extends models for assembly of the central conical core of HIV-1.

Effects of nucleocapsid mutations on human immunodeficiency virus assembly and RNA encapsidation

The human immunodeficiency virus (HIV) Pr55Gag precursor proteins direct virus particle assembly. While Gag-Gag protein interactions which affect HIV assembly occur in the capsid (CA) domain of Pr55Gag, the nucleocapsid (NC) domain, which functions in viral RNA encapsidation, also appears to participate in virus assembly. In order to dissect the roles of the NC domain and the p6 domain, the C-terminal Gag protein domain, we examined the effects of NC and p6 mutations on virus assembly and RNA encapsidation. In our experimental system, the p6 domain did not appear to affect virus release efficiency but p6 deletions and truncations reduced the specificity of genomic HIV-1 RNA encapsidation. Mutations in the nucleocapsid region reduced particle release, especially when the p2 interdomain peptide or the amino-terminal portion of the NC region was mutated, and NC mutations also reduced both the specificity and the efficiency of HIV-1 RNA encapsidation. These results implicated a linkage between RNA encapsidation and virus particle assembly or release. However, we found that the mutant ApoMTRB, in which the nucleocapsid and p6 domains of HIV-1 Pr55Gag were replaced with the Bacillus subtilis MtrB protein domain, released particles efficiently but packaged no detectable RNA. These results suggest that, for the purposes of virus-like particle assembly and release, NC can be replaced by a protein that does not appear to encapsidate RNA.

Determinants of the human immunodeficiency virus type 1 p15NC-RNA interaction that affect enhanced cleavage by the viral protease

During human immunodeficiency virus type 1 (HIV-1) virion assembly, cleavage of the Gag precursor by the viral protease results in the transient appearance of a nucleocapsid-p1-p6 intermediate product designated p15NC. Utilizing the p15NC precursor protein produced with an in vitro transcription-translation system or purified after expression in Escherichia coli, we have demonstrated that RNA is required for efficient cleavage of HIV p15NC. Gel mobility shift and nitrocellulose filter binding experiments indicate that purified p15NC protein specifically binds its corresponding mRNA with an estimated Kd of 1.5 nM. Binding was not affected by the presence or absence of zinc or EDTA. Moreover, mutagenesis of the cysteine residues within either of the two Cys-His arrays had no effect on RNA binding or on RNA-dependent cleavage by the viral protease. In contrast, decreased binding of RNA and diminished susceptibility to cleavage in vitro were observed with p15NC-containing mutations in one or more residues within the triplet of basic amino acids present in the region between the two zinc fingers. In addition, we found that 21- to 24-base DNA and RNA oligonucleotides of a particular sequence and secondary structure could substitute for p15 RNA in the enhancement of p15NC cleavage. Virus particles carrying a mutation in the triplet of NC basic residues (P3BE) show delayed cleavage of p15NC and a defect in core formation despite the eventual appearance of fully processed virion protein. These results define determinants of the p15NC-RNA interaction that lead to enhanced protease-mediated cleavage and demonstrate the importance of the triplet of basic residues in formation of the virus core.

Molecular recognition in the HIV-1 capsid/cyclophilin A complex

The HIV-1 capsid protein (CA) makes an essential interaction with the human peptidyl prolyl isomerase, cyclophilin A (CypA), that results in packaging of CypA into the virion at a CA to CypA stoichiometry of approximately 10:1. The 231 amino acid residue capsid protein is composed of an amino-terminal CypA binding domain (1 to approximately 151; CA151) and a carboxyl-terminal dimerization domain (approximately 151 to 231). We find that CypA binds dimeric CA and monomeric CA151 with identical intrinsic affinities (K[d] = 16(+/-4) microM). This result demonstrates that capsid dimerization and cyclophilin A binding are not thermodynamically coupled and suggests that the substoichiometric ratio of CypA in the HIV-1 virion results from the intrinsic stability of the CA/CypA complex. In the known co-crystal structure of the CA151/CypA complex, CypA binding is mediated exclusively by an exposed capsid loop that spans residues Pro85 to Pro93. The energetic contributions to CypA binding were quantified for each residue in this loop, and the results demonstrate that the Gly89-Pro90 dipeptide is the primary cyclophilin A recognition motif, with Pro85, Val86, His87, Ala88, and Pro93 also making energetically favorable contacts. These studies reveal that the active site of CypA, which can catalyze the isomerization of proline residues in vitro, also functions as a sequence-specific, protein-binding motif in HIV-1 replication.

A multistep, ATP-dependent pathway for assembly of human immunodeficiency virus capsids in a cell-free system

To understand the mechanism by which human immunodeficiency virus type 1 (HIV) capsids are formed, we have reconstituted the assembly of immature HIV capsids de novo in a cell-free system. Capsid authenticity is established by multiple biochemical and morphologic criteria. Known features of the assembly process are closely reproduced, indicating the fidelity of the cell-free reaction. Assembly is separated into co- and posttranslational phases, and three independent posttranslational requirements are demonstrated: (a) ATP, (b) a detergent-sensitive host factor, and (c) a detergent-insensitive host subcellular fraction that can be depleted and reconstituted. Assembly appears to proceed by way of multiple intermediates whose conversion to completed capsids can be blocked by either ATP depletion or treatment with nondenaturing detergent. Specific subsets of these intermediates accumulate upon expression of various assembly-defective Gag mutants in the cell-free system, suggesting that each mutant is blocked at a particular step in assembly. Furthermore, the accumulation of complexes of similar sizes in cells expressing the corresponding mutants suggests that comparable intermediates may exist in vivo. From these data, we propose a multi-step pathway for the biogenesis of HIV capsids, in which the assembly process can be disrupted at a number of discrete points.

Crystal structure of human cyclophilin A bound to the amino-terminal domain of HIV-1 capsid

The HIV-1 capsid protein forms the conical core structure at the center of the mature virion. Capsid also binds the human peptidyl prolyl isomerase, cyclophilin A, thereby packaging the enzyme into the virion. Cyclophilin A subsequently performs an essential function in HIV-1 replication, possibly helping to disassemble the capsid core upon infection. We report the 2.36 A crystal structure of the N-terminal domain of HIV-1 capsid (residues 1-151) in complex with human cyclophilin A. A single exposed capsid loop (residues 85-93) binds in the enzyme's active site, and Pro-90 adopts an unprecedented trans conformation. The structure suggests how cyclophilin A can act as a sequence-specific binding protein and a nonspecific prolyl isomerase. In the crystal lattice, capsid molecules assemble into continuous planar strips. Side by side association of these strips may allow capsid to form the surface of the viral core. Cyclophilin A could then function by weakening the association between capsid strips, thereby promoting disassembly of the viral core.

Production of non-infectious human immunodeficiency virus-like particles which package specifically viral RNA

A recombinant vector that rapidly produces large amounts of human immunodeficiency virus (HIV) virus-like particles (VLPs) was constructed. This vector lacks LTR sequences and a functional nef gene. The VLPs produced are non-infectious but similar in structure to mature, infectious HIV virions. They package specifically HIV RNAs containing appropriate signals and do not package abundant cellular mRNAs (e.g. actin). In the system described here, efficient particle production and release is decoupled from infection. Use of this VLP system offers many advantages over the study of infectious virions, permitting the expression of mutant phenotypes which interfere with virus infectivity.

Structure of the amino-terminal core domain of the HIV-1 capsid protein

The three-dimensional structure of the amino-terminal core domain (residues 1 through 151) of the human immunodeficiency virus-type 1 (HIV-1) capsid protein has been solved by multidimensional heteronuclear magnetic resonance spectroscopy. The structure is unlike those of previously characterized viral coat proteins and is composed of seven alpha helices, two beta hairpins, and an exposed partially ordered loop. The domain is shaped like an arrowhead, with the beta hairpins and loop exposed at the trailing edge and the carboxyl-terminal helix projecting from the tip. The proline residue Pro1 forms a salt bridge with a conserved, buried aspartate residue (Asp51), which suggests that the amino terminus of the protein rearranges upon proteolytic maturation. The binding site for cyclophilin A, a cellular rotamase that is packaged into the HIV-1 virion, is located on the exposed loop and encompasses the essential proline residue Pro90. In the free monomeric domain, Pro90 adopts kinetically trapped cis and trans conformations, raising the possibility that cyclophilin A catalyzes interconversion of the cis- and trans-Pro90 loop structures.

Crystal structures of the trimeric human immunodeficiency virus type 1 matrix protein: implications for membrane association and assembly

The human immunodeficiency virus type 1 (HIV-1) matrix protein forms a structural shell associated with the inner viral membrane and performs other essential functions throughout the viral life cycle. The crystal structure of the HIV-1 matrix protein, determined at 2.3 angstrom resolution, reveals that individual matrix molecules are composed of five major helices capped by a three-stranded mixed beta-sheet. Unexpectedly, the protein assembles into a trimer in three different crystal lattices, burying 1880 angstrom2 of accessible surface area at the trimer interfaces. Trimerization appears to create a large, bipartite membrane binding surface in which exposed basic residues could cooperate with the N-terminal myristoyl groups to anchor the protein on the acidic inner membrane of the virus.

Assembly and immunogenicity of chimeric Gag-Env proteins derived from the human immunodeficiency virus type 1

We evaluated the potential of the precursor Gag protein (Pr55) of the human immunodeficiency virus type 1 (HIV-1) as a carrier for the presentation of envelope epitopes. Recombinant chimeric core-envelope protein-expressing constructs were derived by deletion of regions within the gag gene, especially of regions encoding p24 capsid epitopes. Sequences encoding either the principal neutralization determinant (PND) and/or the CD4-binding domains (CD4BS) were then inserted. Deletion of residues 196-226 within the p24 capsid protein did not prevent self-assembly into virus-like particles (VLPs) whereas deletion of residues 299-328 completely abolished VLP formation. Thus the major homology region (MHR) and proximal sequences are required for capsid assembly. An immunization study in mice showed that assembled chimeric proteins elicited strong anti-Gag, weak anti-envelope, and no neutralizing humoral responses. Nonassembled chimeric proteins were poor immunogens. Mapping of Pr55 antigenic sites using sera from immunized mice and peptides overlapping the entire Gag precursor showed that p24 capsid and p17 matrix epitopes presented to the immune system differed from the mature form (p24 or p17) and the multimeric immature form (Pr55).

Complete inhibition of human immunodeficiency virus Gag myristoylation is necessary for inhibition of particle budding

Myristoylation of human immunodeficiency virus (HIV) Gag protein is essential for virus particle budding. Two reactions are involved; activation of free myristate to myristoyl-CoA and transfer of the myristoyl residue to the Gag N-terminal glycine. We have investigated the effects of triacsin C, an inhibitor of long chain acyl-CoA synthetase, on release of HIV Gag virus-like particle (VLP) produced using the recombinant baculovirus system. First, inhibition of acyl-CoA formation by triacsin C was confirmed using the membrane fractions of insect Sf9 cells as an enzyme source. Second, when HIV Gag protein was expressed in the presence of triacsin C (0-48 microM), Gag myristoylation was inhibited in a dose-dependent manner. Budding of Gag VLP, however, did not follow similar inhibition kinetics but appeared unaffected up to 24 microM, yet was completely abolished at 48 microM when the myristoylation of Gag protein was also completely inhibited. The "all-or-none" inhibition of Gag VLP budding suggests that although inhibition of acyl-CoA synthetase blocks the production of myristoylated Gag protein, only complete inhibition of Gag myristoylation prevents VLP budding. Thus, relatively few myristoylated Gag molecules are sufficient for plasma membrane targeting and VLP budding.

trans-acting proteins involved in RNA encapsidation and viral assembly in human immunodeficiency virus type 1

The human immunodeficiency virus type 1 gag gene product Pr55gag self-assembles when expressed on its own in a variety of eukaryotic systems. Assembly in T lymphocytes has not previously been studied, nor is it clear whether Pr55gag particles can package genomic RNA or if the Gag-Pol polyprotein is required. We have used a series of constructs that express Gag or Gag-Pol proteins with or without the viral protease in transient transfections in COS-1 cells and also expressed stably in CD4+ T cells to study this. Deletion of the p6 domain at the C terminus of protease-negative Pr55gag did not abolish particle release, while truncation of the nucleocapsid protein reduced it significantly, particularly in lymphocytes. Gag-Pol polyprotein was released from T cells in the absence of Pr55gag but did not encapsidate RNA. Pr55gag encapsidated human immunodeficiency virus type 1 RNA whether expressed in a protease-positive or protease-negative context. p6 was dispensable for RNA encapsidation. Marked differences in the level of RNA export were noted between the different cell lines.

p6Gag is required for particle production from full-length human immunodeficiency virus type 1 molecular clones expressing protease

The human immunodeficiency virus type 1 (HIV-1) Gag protein precursor, Pr55Gag, contains at its C-terminal end a proline-rich, 6-kDa domain designated p6. Two functions have been proposed for p6: incorporation of the HIV-1 accessory protein Vpr into virus particles and virus particle production. To characterize the role of p6 in the HIV-1 life cycle and to map functional domains within p6, we introduced a number of nonsense and single and multiple amino acid substitution mutations into p6. Following the introduction of the mutations into the full-length HIV-1 molecular clone pNL4-3, the effects on Gag protein expression and processing, virus particle production, and virus infectivity were analyzed. The production of mutant virus particles was also examined by transmission electron microscopy. The results indicate that (i) p6 is required for efficient virus particle production from a full-length HIV-1 molecular clone; (ii) a Pro-Thr-Ala-Pro sequence, located between residues 7 and 10 of p6, is critical for virus particle production; (iii) mutations outside the Pro-Thr-Ala-Pro motif have little or no effect on virus assembly and release; (iv) the p6 defect is manifested at a late stage in the budding process; and (v) mutations in p6 that severely reduce virion production in HeLa cells also block or significantly delay the establishment of a productive infection in the CEM (12D-7) T-cell line. We further demonstrate that mutational inactivation of the viral protease reverses the p6 defect, suggesting a functional linkage between p6 and the proteolytic processing of the Gag precursor protein during the budding of progeny virions.

A leucine triplet repeat sequence (LXX)4 in p6gag is important for Vpr incorporation into human immunodeficiency virus type 1 particles

Incorporation of Vpr into human immunodeficiency virus type 1 (HIV-1) virions is mediated by the Gag protein, independently of other viral components. We have coexpressed Vpr and Gag constructs in a vaccinia virus expression system in order to map the region of Gag involved in Vpr packaging. Deletion of the carboxyl-terminal p6 region of Gag impaired the ability of Gag to package Vpr. To confirm the role of p6 in Vpr packaging, Rous sarcoma virus (RSV)-HIV chimeras containing HIV-1 p6 were constructed. Although RSV Gag does not package Vpr into virus particles, a chimera containing HIV-1 p6 is sufficient for Vpr incorporation. To map the region of p6 involved in Vpr packaging, a series of p6 point mutations and deletion mutations was analyzed. Mutations in the N-terminal p6 proline-rich domain, for which preliminary evidence shows a marked decrease in virion incorporated RNA, did not affect Vpr incorporation. Deletion of residues 1 to 31 of HIV-1 p6 did not affect Vpr packaging, but residues 35 to 47, including an (LXX)4 domain, were required for Vpr incorporation into virus particles.

Self-assembly in vitro of purified CA-NC proteins from Rous sarcoma virus and human immunodeficiency virus type 1

The internal structural proteins of retroviruses are proteolytically processed from the Gag polyprotein, which alone is able to assemble into virus-like particles when expressed in cells. All Gag proteins contain domains corresponding to the three structural proteins MA, CA, and NC. We have expressed the CA and NC domains together as a unit in Escherichia coli, both for Rous sarcoma virus (RSV) and for human immunodeficiency virus type 1 (HIV-1). We also expressed a similar HIV-1 protein carrying the C-terminal p6 domain. RSV CA-NC, HIV-1 CA-NC, and HIV-1 CA-NC-p6 were purified in native form by classic methods. After adjustment of the pH and salt concentration, each of these proteins was found to assemble at a low level of efficiency into structures that resembled circular sheets and roughly spherical particles. The presence of RNA dramatically increased the efficiency of assembly, and in this case all three proteins formed hollow, cylindrical particles whose lengths were determined by the size of the RNA. The optimal pH at which assembly occurred was 5.5 for the RSV protein and 8.0 for the HIV-1 proteins. The treatment of the RSV CA-NC cylindrical particles with nonionic detergent, with ribonuclease, or with viral protease caused disassembly. These results suggest that RNA plays an important structural role in the virion and that it may initiate and organize the assembly process. The in vitro system described should facilitate the dissection of assembly pathways in retroviruses.

Retroviral nucleocapsid domains mediate the specific recognition of genomic viral RNAs by chimeric Gag polyproteins during RNA packaging in vivo

The retroviral nucleocapsid (NC) protein is necessary for the specific encapsidation of the viral genomic RNA by the assembling virion. However, it is unclear whether NC contains the determinants for the specific recognition of the viral RNA or instead contributes nonspecific RNA contacts to strengthen a specific contact made elsewhere in the Gag polyprotein. To discriminate between these two possibilities, we have swapped the NC domains of the human immunodeficiency virus type 1 (HIV-1) and Moloney murine leukemia virus (M-MuLV), generating an HIV-1 mutant containing the M-MuLV NC domain and an M-MuLV mutant containing the HIV-1 NC domain. These mutants, as well as several others, were characterized for their abilities to encapsidate HIV-1, M-MuLV, and nonviral RNAs and to preferentially package genomic viral RNAs over spliced viral RNAs. We found that the M-MuLV NC domain mediates the specific packaging of RNAs containing the M-MuLV psi packaging element, while the HIV-1 NC domain confers an ability to package the unspliced HIV-1 RNA over spliced HIV-1 RNAs. In addition, we found that the HIV-1 mutant containing the M-MuLV NC domain exhibited a 20-fold greater ability than wild-type HIV-1 to package a nonviral RNA. These results help confirm the notion that the NC domain specifically recognizes the retroviral genomic RNA during RNA encapsidation.

Positionally independent and exchangeable late budding functions of the Rous sarcoma virus and human immunodeficiency virus Gag proteins

The Gag proteins of Rous sarcoma virus and human immunodeficiency virus (HIV) each contain a function involved in a late step in budding, defects in which result in the accumulation of these molecules at the plasma membrane. In the Rous sarcoma virus Gag protein (Pr76gag), this assembly domain is associated with a PPPY motif, which is located at an internal position between the MA and CA sequences. This motif is not contained anywhere within the HIV Gag protein (Pr55gag), and the MA sequence is linked directly to CA. Instead, a late assembly function of HIV has been associated with the p6 sequence situated at the C terminus of Gag. Here we demonstrate the remarkable finding that the late assembly domains from these two unrelated Gag proteins are exchangeable between retroviruses and can function in a positionally independent manner.

A molecular determinant of human immunodeficiency virus particle assembly located in matrix antigen p17

We report single-point mutations that are located in the matrix protein domain of the gag gene of human immunodeficiency virus type 1 and that prevent Gag particle formation. We show that mutations of p17 that abolish human immunodeficiency virus particle assembly also prevent the dimerization of p17 protein, as measured directly by a protein-protein binding assay. In the three-dimensional structure of p17, mutations that abolish dimerization are located in a single alpha helix that forms part of a fingerlike projection from one side of the molecule. Peptides derived from this region of p17 also reduce the level of p17 dimer when they are added to p17-expressing cells and compete for p17 self-association when present in protein-protein binding assays. We propose that the dimerization of the Gag precursor that occurs by the interdigitation of alpha helices on adjacent matrix molecules is a key stage in virion assembly and that the prevention of such an interaction is the molecular basis of particle misassembly.

The spacer peptide between human immunodeficiency virus capsid and nucleocapsid proteins is essential for ordered assembly and viral infectivity

Morphogenesis of retroviruses involves ordered assembly of the structural Gag- and Gag-Pol polyproteins, with subsequent budding from the plasma membrane and proteolytic cleavage by the viral proteinase (PR). Two cleavage sites exist between the capsid (CA) and nucleocapsid (NC) domains of the human immunodeficiency virus (HIV) type 1 Gag polyprotein which are separated by a 14-amino-acid spacer peptide of unknown function. To analyze the role of the two cleavage sites and the spacer peptide, both sites were individually mutated and a deletion mutation that precisely removes the spacer peptide was constructed. Following transfection of proviral DNA carrying the point mutations, mutant polyproteins were synthesized and assembled like wild-type polyprotein, and release of particles was not significantly altered. Both mutations abolished cleavage at the respective site and reduced or abolished viral infectivity. Deletion of the spacer peptide severely affected ordered assembly and reduced particle release. The extracellular particles that were released exhibited normal density but were heterogeneous in size. Electron micrographs revealed large electron-dense plaques underneath the plasma membrane of transfected cells which appeared like confluent ribonucleoprotein complexes arrested early in the budding process. Extracellular particles exhibited very aberrant and heterogeneous morphology and were incapable of inducing viral spread. These particles may correspond to membrane vesicles sequestered by the rigid structures underneath the cell membrane and not released by a regular budding process.

Sequence requirements for encapsidation of deletion mutants and chimeras of human immunodeficiency virus type 1 Gag precursor into retrovirus-like particles

Interacting domains in human immunodeficiency virus type 1 (HIV-1) Gag precursor (Pr55gag) expressed in recombinant baculovirus-infected cells were investigated by three different methods: (i) trans rescue and coencapsidation of C-terminal deletion (amber) Gag mutants and Gag chimeras into retrovirus-like particles in complementation experiments with HIV-1 wild-type (WT) Pr55gag, (ii) Gag-Gag interactions in vitro in Gag ligand affinity blotting assays, and (iii) quantitative immunoelectron microscopy of retrovirus-like Gag particles, using a panel of monoclonal antibodies to probe the epitope accessibility of encapsidated HIV-1 WT Pr55gag. Four discrete regions, within residues 210 to 241, 277 to 306 (major homology region), and 307 to 333 in the capsid (CA) protein and residues 358 to 374 at the CA-spacer peptide 2 (sp2) junction, were found to have a significant influence on Gag trans-packaging efficiency. A fifth region, within residues 375 to 426, overlapping the sp2-nucleocapsid (NC) protein junction and most of the NC, seemed to be essential for stable inter-Gag binding in vitro. The coincidence of the two regions from 358 to 374 and 375 to 426 with an immunologically silent domain in WT Gag particles suggested that they could participate in direct Gag interactions.

Linker insertion mutations in the human immunodeficiency virus type 1 gag gene: effects on virion particle assembly, release, and infectivity

The phenotypes of a series of mutant human immunodeficiency virus type 1 proviruses with linker insertion and deletion mutations within the gag coding region were characterized. These mutants were tested for their ability to make and release viral particles in COS7 cells and for their viability in vivo. Of the 12 mutant proviruses, 4 did not make extracellular virion particles when transfected into COS7 cells. All four of these mutants had mutations in the C-terminal domain of CA. These mutants appeared to have defects both in the ability to accumulate high-molecular-weight intracellular structures containing Gag and Pol products and in the ability to release virion particles. Seven of the mutant proviruses retained the ability to make, release, and process virion particles from COS7 cells. These particles contained the Env glycoprotein, viral genomic RNA, and the mature products of the Gag and Gag-Pol polyproteins, yet they were noninfectious or poorly infectious. The defect in these mutants appears to be in one of the early steps of the viral life cycle. Thus, multiple regions throughout Gag appear to be important in mediating the early steps of the viral life cycle.

Human immunodeficiency virus type 1 MA deletion mutants expressed in baculovirus-infected cells: cis and trans effects on the Gag precursor assembly pathway

The role of the matrix protein (MA) of human immunodeficiency virus type 1 in intracellular transport, assembly, and extracellular release of Gag polyprotein precursor (Pr55gag) was investigated by deletion mutagenesis of the MA domain of recombinant Gag precursor expressed in baculovirus-infected cells. In addition, three carboxy-terminally truncated forms of the Gag precursor, representing mainly the MA, were constructed. One corresponded to an MA with a deletion of its last 12 residues (amb120), while the others corresponded to the entire MA with an additional sequence from the N-terminal portion of the CA (amb143 and och180). Deletions within the MA central region (residues 41 to 78) appeared to be detrimental to Gag particle assembly and budding from the plasma membrane. A slightly narrower domain, between amino acids 41 and 68, was found to be critical for soluble Gag secretion. Mutations which totally or partially deleted one or the other of the two polybasic signals altered the transport of N-myristylated Gag precursor to the plasma membrane. In coexpression with wild-type Gag precursor, a discrete trans-dominant negative effect on wild-type Gag particle assembly and release was observed with deletion mutants located in the central MA region (residues 41 to 78). A more significant negative effect was obtained with the two recombinant proteins of amb120 and och180, which redirected the Gag particle assembly pathway from the plasma membrane compartment to intracellular vesicles (amb120) and to the nuclear compartment (och180).

Localization of the Vpx packaging signal within the C terminus of the human immunodeficiency virus type 2 Gag precursor protein

Viral protein X (Vpx) is a human immunodeficiency virus type 2 (HIV-2) and simian immunodeficiency virus accessory protein that is packaged into virions in molar amounts equivalent to Gag proteins. To delineate the processes of virus assembly that mediate Vpx packaging, we used a recombinant vaccinia virus-T7 RNA polymerase system to facilitate Gag protein expression, particle assembly, and extracellular release. HIV genes were placed under control of the bacteriophage T7 promoter and transfected into HeLa cells expressing T7 RNA polymerase. Western immunoblot analysis detected p55gag and its cleavage products p39 and p27 in purified particles derived by expression of gag and gag-pol, respectively. In trans expression of vpx with either HIV-2 gag or gag-pol gave rise to virus-like particles that contained Vpx in amounts similar to that detected in HIV-2 virus produced from productively infected T cells. Using C-terminal deletion and truncation mutants of HIV-2 Gag, we mapped the p15 coding sequence for determinants of Vpx packaging. This analysis revealed a region (residues 439 to 497) downstream of the nucleocapsid protein (NC) required for incorporation of Vpx into virions. HIV-1/HIV-2 gag chimeras were constructed to further characterize the requirements for incorporation of Vpx into virions. Chimeric HIV-1/HIV-2 Gag particles consisting of HIV-1 p17 and p24 fused in frame at the C terminus with HIV-2 p15 effectively incorporate Vpx, while chimeric HIV-2/HIV-1 Gag particles consisting of HIV-2 p17 and p27 fused in frame at the C terminus with HIV-1 p15 do not. Expression of a 68-amino-acid sequence of HIV-2 containing residues 439 to 497 fused to the coding regions of HIV-1 p17 and p24 also produced virus-like particles capable of packaging Vpx in amounts similar to that of full-length HIV-2 Gag. Sucrose gradient analysis confirmed particle association of Vpx and Gag proteins. These results demonstrate that the HIV-2 Gag precursor (p55) regulates incorporation of Vpx into virions and indicates that the packaging signal is located within residues 439 to 497.

Single amino acid changes in the human immunodeficiency virus type 1 matrix protein block virus particle production

The matrix protein of human immunodeficiency virus type 1 is encoded by the amino-terminal portion of the Gag precursor and is postulated to be involved in a variety of functions in the virus life cycle. To define domains and specific amino acid residues of the matrix protein that are involved in virus particle assembly, we introduced 35 amino acid substitution mutations in the human immunodeficiency virus type 1 matrix protein. Using reverse transcriptase and radioimmunoprecipitation analyses and transmission electron microscopy, we assessed the mutants for their ability to form virus particles and to function in the infection process. This study has identified several domains of the matrix protein in which single amino acid substitutions dramatically reduce the efficiency of virus particle production. These domains include the six amino-terminal residues of matrix, the region of matrix between amino acids 55 and 59, and the region between amino acids 84 and 95. Single amino acid substitutions in one of these domains (between matrix amino acids 84 and 88) result in a redirection of the majority of virus particle formation to sites within cytoplasmic vacuoles.

Cell line-dependent release of HIV-like gag particles after infection of mammalian cells with recombinant vaccinia viruses

We investigated the production of Gag particles by Vero, CV-1, or 1D cells infected with different vaccinia virus recombinants expressing HIV gag or gag-pol genes. Immunoblots of (centrifuged) culture media from 1D cells infected with vMM5, a vaccinia virus recombinant expressing the HIV-2 gag-pol genes, revealed the presence of abundant particles that contained (mostly processed) Gag antigens. In contrast, Gag particles were found only in low amounts in the culture medium from Vero cells infected with the same HIV gag-pol vaccinia virus recombinant; the Gag precursor remained associated with the infected Vero cells and was efficiently processed. This low excretion of Gag particles after infection of Vero cells with vMM5 was also demonstrated by assays of reverse transcriptase activity in the pellet of centrifuged culture medium. Cell fractionation showed that Gag proteins were predominantly found in the membrane fraction from both 1D and Vero cells. Electron microscopy observations of 1D or of Vero cells infected with vMM5 vaccinia virus recombinant revealed in both cases the presence of particles budding at the plasma membrane. However, the shape of the budding particles was different in the two cell lines, with immature forms present in the membrane from the infected Vero cells. An inefficient excretion of Gag particles was also observed after infection of Vero cells with different vaccinia virus recombinants expressing either an uncleaved HIV-2 Gag protein or the HIV-1 gag-pol genes, as judged both by immunoblot and reverse transcriptase activity assays.(ABSTRACT TRUNCATED AT 250 WORDS)

Phenotypic characterization of insertion mutants of the human immunodeficiency virus type 1 Gag precursor expressed in recombinant baculovirus-infected cells

A panel of 28 insertion mutants of the human immunodeficiency virus type 1 (HIV-1) Gag precursor (Pr55Gag) was constructed by linker-insertion mutagenesis and expressed in recombinant baculovirus-infected insect cells. One set of 14 mutants carried the normal N-myristylation signal; the other set constituted their non-N-myristylated counterparts. The mutants were characterized with respect to (i) assembly and extracellular release of membrane-enveloped budding Gag particles, (ii) intracellular assembly and nuclear transport of Gag cores, (iii) specific processing of Pr55Gag by HIV-1 protease in vivo, and (iv) binding of Pr55Gag to an HIV-1 genomic RNA probe in Northwestern blotting. Insertions within the region between amino acid residues 209 and 334 in the CA domain appeared to be the most detrimental to Gag particle assembly and release of Gag into the external medium, whereas a narrower window, between residues 209 and 241, was found to be critical for secretion of soluble Pr55Gag. Differences in Pr55Gag processing in vivo and RNA binding in vitro between N-myristylated and non-N-myristylated Gag mutants suggested a major conformational role for the myristylated N terminus of Gag precursor. In coinfection experiments using wild-type Gag- and mutant Gag-expressing recombinants, a transdominant negative effect on Gag particle assembly and release was observed for insertions located in two separate domains, the matrix and nucleocapsid.

Specific binding of human immunodeficiency virus type 1 gag polyprotein and nucleocapsid protein to viral RNAs detected by RNA mobility shift assays

Packaging of retroviral genomic RNA during virion assembly is thought to be mediated by specific interactions between the gag polyprotein and RNA sequences (often termed the psi or E region) near the 5' end of the genome. For many retroviruses, including human immunodeficiency virus type 1 (HIV-1), the portions of the gag protein and the RNA that are required for this interaction remain poorly defined. We have used an RNA gel mobility shift assay to measure the in vitro binding of purified glutathione S-transferase-HIV-1 gag fusion proteins to RNA riboprobes. Both the complete gag polyprotein and the nucleocapsid (NC) protein alone were found to bind specifically to an HIV-1 riboprobe. Either Cys-His box of NC could be removed without eliminating specific binding to the psi riboprobe, but portions of gag containing only the MA and CA proteins without NC did not bind to RNA. There were at least two binding sites in HIV-1 genomic RNA that bound to the gag polyprotein: one entirely 5' to gag and one entirely within gag. The HIV-1 NC protein bound to riboprobes containing other retroviral psi sequences almost as well as to the HIV-1 psi riboprobe.

Functional chimeras of the Rous sarcoma virus and human immunodeficiency virus gag proteins

The Gag protein encoded by Rous sarcoma virus (RSV) is the only viral product required for the process of budding whereby virus particles are formed at the plasma membrane. Deletion analysis of this Gag molecule has revealed several regions (assembly domains) that are important for budding. One of these domains is located at the amino terminus and is needed for membrane binding. Another is located within the carboxy-terminal third of the protein. Though there is little sequence homology among the Gag proteins of unrelated retroviruses, it seemed possible that their assembly domains might be functionally conserved, and to explore this idea, numerous Gag chimeras were made. The results indicate that the first 10 amino acids of the human immunodeficiency virus (HIV) Gag protein can suppress the block to budding caused by deletions in the RSV MA sequence, much as described previously for the first 10 residues from the Src oncoprotein (J.W. Wills, R.C. Craven, R. A. Weldon, Jr., T. D. Nelle, and C.R. Erdie, J. Virol. 65:3804-3812, 1991). In addition, the carboxy-terminal half of the HIV Gag protein was fused to a truncated RSV Gag molecule, mutant Bg-Bs, which is unable to direct core assembly. This chimera was able to produce particles at a rate identical to that of RSV and of a density similar to that of authentic virions. Deletion analysis of the carboxy-terminal chimera revealed two small regions within the HIV NC protein that were sufficient for endowing mutant Bg-Bs with these properties. Chimeras lacking both regions produced particles of a low density, suggesting that these sequences may be involved in the tight packing of Gag molecules during assembly. In a related set of experiments, replacement of the RSV protease with that of HIV resulted in premature processing within the RSV sequence and a block to budding. Particle assembly was restored when the HIV PR activity was inactivated by mutagenesis. Collectively, the data presented here illustrate the functional similarities of Gag proteins from unrelated retroviruses.

Characterization of a small (25-kilodalton) derivative of the Rous sarcoma virus Gag protein competent for particle release

Retroviral Gag proteins have the ability to induce budding and particle release from the plasma membrane when expressed in the absence of all of the other virus-encoded components; however, the locations of the functional domains within the Gag protein that are important for this process are poorly understood. It was shown previously that the protease sequence of the Rous sarcoma virus (RSV) Gag protein can be replaced with a foreign polypeptide, iso-1-cytochrome c from a yeast, without disrupting particle assembly (R. A. Weldon, Jr., C. R. Erdie, M. G. Oliver, and J. W. Wills, J. Virol. 64:4169-4179, 1990). An unexpected product of the chimeric gag gene is a small, Gag-related protein named p25C. This product was of interest because of its high efficiency of packaging into particles. The goal of the experiments described here was to determine the mechanism by which p25C is synthesized and packaged into particles. The results demonstrate that it is not the product of proteolytic processing of the Gag-cytochrome precursor but is derived from an unusual spliced mRNA. cDNA clones of the spliced mRNA were obtained, and each expressed a product of approximately 25 kDa, designated p25M1, which was released into the growth medium in membrane-enclosed particles that were much lighter than authentic retrovirions as measured in sucrose density gradients. DNA sequencing revealed that the clones encode the first 180 of the 701 amino acids of the RSV Gag protein and no residues from iso-1-cytochrome c. This suggested that a domain in the carboxy-terminal half of Gag is important for the packaging of Gag proteins into dense arrays within the particles. In support of this hypothesis, particles of the correct density were obtained when a small segment from the carboxy terminus of the RSV Gag protein (residues 417 to 584) was included on the end of p25.