High-throughput automated refolding screening of inclusion bodies

Recombinant expression, in vitro refolding, and biophysical characterization of the N-terminal domain of T1R3 taste receptor

The sweet taste receptor is a heterodimeric receptor composed of the T1R2 and T1R3 subunits, while T1R1 and T1R3 assemble to form the umami taste receptor. T1R receptors belong to the family of class C G-protein coupled receptors (GPCRs). In addition to a transmembrane heptahelical domain, class C GPCRs have a large extracellular N-terminal domain (NTD), which is the primary ligand-binding site. The T1R2 and T1R1 subunits have been shown to be responsible for ligand binding, via their NTDs. However, little is known about the contribution of T1R3-NTD to receptor functions. To enable biophysical characterization, we overexpressed the human NTD of T1R3 (hT1R3-NTD) using Escherichia coli in the form of inclusion bodies. Using a fractional factorial screen coupled to a functional assay, conditions were determined for the refolding of hT1R3-NTD. Far-UV circular dichroism spectroscopic studies revealed that hT1R3-NTD was well refolded. Using size-exclusion chromatography, we found that the refolded protein behaves as a dimer. Ligand binding quantified by tryptophan fluorescence quenching and microcalorimetry showed that hT1R3-NTD is functional and capable of binding sucralose with an affinity in the millimolar range. This study also provides a strategy to produce functional hT1R3-NTD by heterologous expression in E. coli; this is a prerequisite for structural determination and functional analysis of ligand-binding regions of other class C GPCRs.

Single pH buffer refolding screen for protein from inclusion bodies

We previously reported the set up of an automated test for screening the refolding of recombinant proteins expressed as inclusion bodies in Escherichia coli[1]. The screen used 96 refolding buffers and was validated with 24 proteins, 70% of which remained soluble in at least one buffer. In the present paper, we have analyzed in more detail these experimental data to see if the refolding process can be driven by general rules. Notably, we found that proteins with an acidic isoelectric point (pI) refolded in buffers the average pH of which was alkaline and conversely. In addition, the number of refolding buffers wherein a protein remained soluble increased with the difference between its pI and the average pH of the buffers in which it refolded. A trend analysis of the other variables (ionic strength, detergents, etc.) was also performed. On the basis of this analysis, we devised and validated a new refolding screen made of a single buffer for acidic proteins and a single buffer for alkaline proteins.

One-step generation of error-prone PCR libraries using Gateway® technology

Background

Error-prone PCR (epPCR) libraries are one of the tools used in directed evolution. The Gateway^® technology allows constructing epPCR libraries virtually devoid of any background (i.e., of insert-free plasmid), but requires two steps: the BP and the LR reactions and the associated E. coli cell transformations and plasmid purifications.

Results

We describe a method for making epPCR libraries in Gateway^® plasmids using an LR reaction without intermediate BP reaction. We also describe a BP-free and LR-free sub-cloning method for in-frame transferring the coding sequence of selected clones from the plasmid used to screen the library to another one devoid of tag used for screening (such as the green fluorescent protein). We report preliminary results of a directed evolution program using this method.

Conclusions

The one-step method enables producing epPCR libraries of as high complexity and quality as does the regular, two-step, protocol for half the amount of work. In addition, it contributes to preserve the original complexity of the epPCR product.

Affinity chromatography as a tool for antibody purification

The global antibody market has grown exponentially due to increasing applications in research, diagnostics and therapy. Antibodies are present in complex matrices (e.g. serum, milk, egg yolk, fermentation broth or plant-derived extracts). This has led to the need for development of novel platforms for purification of large quantities of antibody with defined clinical and performance requirements. However, the choice of method is strictly limited by the manufacturing cost and the quality of the end product required. Affinity chromatography is one of the most extensively used methods for antibody purification, due to its high selectivity and rapidity. Its effectiveness is largely based on the binding characteristics of the required antibody and the ligand used for antibody capture. The approaches used for antibody purification are critically examined with the aim of providing the reader with the principles and practical insights required to understand the intricacies of the procedures. Affinity support matrices and ligands for affinity chromatography are discussed, including their relevant underlying principles of use, their potential value and their performance in purifying different types of antibodies, along with a list of commercially available alternatives. Furthermore, the principal factors influencing purification procedures at various stages are highlighted. Practical considerations for development and/or optimizations of efficient antibody-purification protocols are suggested.

Mycobacterium tuberculosis lipolytic enzymes as potential biomarkers for the diagnosis of active tuberculosis

Background

New diagnosis tests are urgently needed to address the global tuberculosis (TB) burden and to improve control programs especially in resource-limited settings. An effective in vitro diagnostic of TB based on serological methods would be regarded as an attractive progress because immunoassays are simple, rapid, inexpensive, and may offer the possibility to detect cases missed by standard sputum smear microscopy. However, currently available serology tests for TB are highly variable in sensitivity and specificity. Lipolytic enzymes have recently emerged as key factors in lipid metabolization during dormancy and/or exit of the non-replicating growth phase, a prerequisite step of TB reactivation. The focus of this study was to analyze and compare the potential of four Mycobacterium tuberculosis lipolytic enzymes (LipY, Rv0183, Rv1984c and Rv3452) as new markers in the serodiagnosis of active TB.

Methods

Recombinant proteins were produced and used in optimized ELISA aimed to detect IgG and IgM serum antibodies against the four lipolytic enzymes. The capacity of the assays to identify infection was evaluated in patients with either active TB or latent TB and compared with two distinct control groups consisting of BCG-vaccinated blood donors and hospitalized non-TB individuals.

Results

A robust humoral response was detected in patients with active TB whereas antibodies against lipolytic enzymes were infrequently detected in either uninfected groups or in subjects with latent infection. High specifity levels, ranging from 93.9% to 97.5%, were obtained for all four antigens with sensitivity values ranging from 73.4% to 90.5%, with Rv3452 displaying the highest performances. Patients with active TB usually exhibited strong IgG responses but poor IgM responses.

Conclusion

These results clearly indicate that the lipolytic enzymes tested are strongly immunogenic allowing to distinguish active from latent TB infections. They appear as potent biomarkers providing high sensitivity and specificity levels for the immunodiagnosis of active TB.

Crystal structure of a novel type of odorant-binding protein from Anopheles gambiae, belonging to the C-plus class

Agam (Anopheles gambiae) relies on its olfactory system to target human prey, leading eventually to the injection of Plasmodium falciparum, the malaria vector. OBPs (odorant-binding proteins) are the first line of proteins involved in odorant recognition. They interact with olfactory receptors and thus constitute an interesting target for insect control. In the present study, we undertook a large-scale analysis of proteins belonging to the olfactory system of Agam with the aim of preventing insect bites by designing strong olfactory repellents. We determined the three-dimensional structures of several Agam OBPs, either alone or in complex with model compounds. In the present paper, we report the first three-dimensional structure of a member of the C-plus class of OBPs, AgamOBP47, which has a longer sequence than classical OBPs and contains six disulfide bridges. AgamOBP47 possesses a core of six α-helices and three disulfide bridges, similar to the classical OBP fold. Two extra loops and the N- and C-terminal extra segments contain two additional α-helices and are held in conformation by three disulfide bridges. They are located either side of the classical OBP core domain. The binding site of OBP47 is located between the core and the additional domains. Two crevices are observed on opposite sides of OBP47, which are joined together by a shallow channel of sufficient size to accommodate a model of the best-tested ligand. The binding sites of C-plus class OBPs therefore exhibit different characteristics, as compared with classical OBPs, which should lead to markedly diverse functional implications.

Tuning different expression parameters to achieve soluble recombinant proteins in E. coli: advantages of high-throughput screening

Proteins are the main reagents for structural, biomedical, and biotechnological studies; however, some important challenges remain concerning protein solubility and stability. Numerous strategies have been developed, with some success, to mitigate these challenges, but a universal strategy is still elusive. Currently, researchers face a plethora of alternatives for the expression of the target protein, which generates a great diversity of conditions to be evaluated. Among these, different promoter strength, diverse expression host and constructs, or special culture conditions have an important role in protein solubility. With the arrival of automated high-throughput screening (HTS) systems, the evaluation of hundreds of different conditions within reasonable cost and time limits is possible. This technology increases the chances to obtain the target protein in a pure, soluble, and stable state. This review focuses on some of the most commonly used strategies for the expression of recombinant proteins in the enterobacterium Escherichia coli, including the use of HTS for the production of soluble proteins.

Interactions between kinase scaffold MP1/p14 and its endosomal anchoring protein p18

Scaffold and adaptor proteins provide means for the spatial organization of signaling cascades. MP1 is a scaffold protein in the RAF/MEK/ERK pathway and together with p14 forms a heterodimer that was shown to be responsible for localization of MEK to the late endosomal compartment. However, the mechanism by which MP1/p14 tethers MEK to the endosomal membrane was not resolved. Recently, an adaptor protein p18 was identified as a binding partner of MP1/p14. p18 is attached to the endosomal surface by myristoyl and palmitoyl groups located at the N-terminus of the protein and tethers the signaling complex to the cytoplasmic surface of late endosomes. p18 expressed in E. coli is retained in inclusion bodies, and we developed a protocol to refold it from the denatured state. Coexpression of p18 with MP1/p14 leads to a soluble protein complex. We examined the interaction of p18 with the MP1/p14 constitutive heterodimer. We cloned various constructs of p18 and characterized their behavior and interactions with MP1/p14 in vitro using SEC and pull-down assays. We determined that the refolded p18 is a monomer in solution with molten globule characteristics. Its binding to MP1/p14 promotes folding and ordering. We also identified a proteolytically stable fragment of p18 and showed that it binds to MP1/p14 with similar affinity to the full-length construct and determined an apparent dissociation constant in the low micromolar range for the interaction. Finally, we show that the ∼60 C-terminal residues of p18 are not required for in vitro interaction with MP1/p14 heterodimer, in contrast to previously reported findings showing that truncation of 41 C-terminal residues of p18 prevents endosomal localization of MP1/p14.

N-terminal domain of the V-ATPase a2-subunit displays integral membrane protein properties

V-ATPase is a multisubunit membrane complex that functions as nanomotor coupling ATP hydrolysis with proton translocation across biological membranes. Recently, we uncovered details of the mechanism of interaction between the N-terminal tail of the V-ATPase a2-subunit isoform (a2N(1-402)) and ARNO, a GTP/GDP exchange factor for Arf-family small GTPases. Here, we describe the development of two methods for preparation of the a2N(1-402) recombinant protein in milligram quantities sufficient for further biochemical, biophysical, and structural studies. We found two alternative amphiphilic chemicals that were required for protein stability and solubility during purification: (i) non-detergent sulfobetaine NDSB-256 and (ii) zwitterionic detergent FOS-CHOLINE®12 (FC-12). Moreover, the other factors including mild alkaline pH, the presence of reducing agents and the absence of salt were beneficial for stabilization and solubilization of the protein. A preparation of a2N(1-402) in NDSB-256 was successfully used in pull-down and BIAcore™ protein-protein interaction experiments with ARNO, whereas the purity and quality of the second preparation in FC-12 was validated by size-exclusion chromatography and CD spectroscopy. Surprisingly, the detergent requirement for stabilization and solubilization of a2N(1-402) and its cosedimentation with liposomes were different from peripheral domains of other transmembrane proteins. Thus, our data suggest that in contrast to current models, so called "cytosolic" tail of the a2-subunit might actually be embedded into and/or closely associated with membrane phospholipids even in the absence of any obvious predicted transmembrane segments. We propose that a2N(1-402) should be categorized as an integral monotopic domain of the a2-subunit isoform of the V-ATPase.

High-throughput process development for biopharmaceutical drug substances

Quality by Design (QbD) is gaining industry acceptance as an approach towards development and commercialization of biotechnology therapeutic products that are expressed via microbial or mammalian cell lines. In QbD, the process is designed and controlled to deliver specified quality attributes consistently. To acquire the enhanced understanding that is necessary to achieve the above, however, requires more extensive experimentation to establish the design space for the process and the product. With biotechnology companies operating under ever-increasing pressure towards lowering the cost of manufacturing, the use of high-throughput tools has emerged as a necessary enabler of QbD in a time- and resource-constrained environment. We review this topic for those in academia and industry that are engaged in drug substance process development.

Comparative production analysis of three phlebovirus nucleoproteins under denaturing or non-denaturing conditions for crystallographic studies

Nucleoproteins (NPs) encapsidate the Phlebovirus genomic (-)RNA. Upon recombinant expression, NPs tend to form heterogeneous oligomers impeding characterization of the encapsidation process through crystallographic studies. To overcome this problem, we set up a standard protocol in which production under both non-denaturing and denaturing/refolding conditions can be investigated and compared. The protocol was applied for three phlebovirus NPs, allowing an optimized production strategy for each of them. Remarkably, the Rift Valley fever virus NP was purified as a trimer under native conditions and yielded protein crystals whereas the refolded version could be purified as a dimer. Yields of trimeric Toscana virus NP were higher from denaturing than from native condition and lead to crystals. The production of Sandfly Fever Sicilian virus NP failed in both protocols. The comparative protocols described here should help in rationally choosing between denaturing or non-denaturing conditions, which would finally result in the most appropriate and relevant oligomerized protein species. The structure of the Rift Valley fever virus NP has been recently published using a refolded monomeric protein and we believe that the process we devised will contribute to shed light in the genome encapsidation process, a key stage in the viral life cycle.

Phleboviruses have a worldwide distribution and are usually represented by their prototype Rift Valley fever virus that can have a great impact on health and economy in Africa. The genome of phleboviruses is a segmented negative strand RNA that is encapsidated by the nucleoprotein. The structure of the monomeric nucleoprotein has been recently published but it's not sufficient to decipher a convincing mechanism for the nucleoprotein oligomerization. In order to understand this key step in the virus life cycle, the purification of oligomers homogeneous in size would be a key step to launch structural studies. To that aim, a procedure relying on recombinant protein production in both denaturing and non-denaturing conditions was applied to three phlebovirus nucleoproteins. Although the best production pipeline differs for each protein, pure and homogeneous solutions of Rift Valley fever virus and Toscana virus nucleoproteins were successfully obtained. Both proteins, behaving as apparent trimers in solution, lead to protein crystallization, a starting point to understand the genome encapsidation through structural studies.

Experimental optimization of protein refolding with a genetic algorithm

Refolding of proteins from solubilized inclusion bodies still represents a major challenge for many recombinantly expressed proteins and often constitutes a major bottleneck. As in vitro refolding is a complex reaction with a variety of critical parameters, suitable refolding conditions are typically derived empirically in extensive screening experiments. Here, we introduce a new strategy that combines screening and optimization of refolding yields with a genetic algorithm (GA). The experimental setup was designed to achieve a robust and universal method that should allow optimizing the folding of a variety of proteins with the same routine procedure guided by the GA. In the screen, we incorporated a large number of common refolding additives and conditions. Using this design, the refolding of four structurally and functionally different model proteins was optimized experimentally, achieving 74-100% refolding yield for all of them. Interestingly, our results show that this new strategy provides optimum conditions not only for refolding but also for the activity of the native enzyme. It is designed to be generally applicable and seems to be eligible for all enzymes.

Mycobacterium tuberculosis Rv1090 and Rv1987 encode functional β-glucan-targeting proteins

Mycobacterium tuberculosis is a facultative intracellular pathogen, and the ability of this bacterium to survive and to grow inside macrophages is central to its virulence. Multiple strategies are employed by M. tuberculosis to ensure survival in macrophages, including secretion of several proteins, which are good candidates to be virulence factors, drug targets for disease intervention, and vaccine antigens. However, some M. tuberculosis secreted proteins do not appear to play any role in the growth or survival of the bacterium in its mammalian host. Among these proteins are three putative cellulose-targeting proteins encoded by the genes Rv0062, Rv1090, and Rv1987. It has been previously shown that Rv0062 encodes an active cellulase. Here we report that Rv1090 and Rv1987 also encode functional proteins. Rv1090 is able to hydrolyze barley β-glucan while Rv1987 displays cellulose-binding activity on filter paper and on microcrystalline cellulose (Avicel). Collectively, these observations point toward a unique unknown relationship between M. tuberculosis and a cellulose-containing host. We hypothesize that amoeba could be such hosts.

Solution and electron microscopy characterization of lactococcal phage baseplates expressed in Escherichia coli

We report here the characterization of several large structural protein complexes forming the baseplates (or part of them) of Siphoviridae phages infecting Lactococcus lactis: TP901-1, Tuc2009 and p2. We revisited a "block cloning" expression strategy and extended this approach to genomic fragments encoding proteins whose interacting partners have not yet been clearly identified. Biophysical characterization of some of these complexes using circular dichroism and size exclusion chromatography, coupled with on-line light scattering and refractometry, demonstrated that the over-produced recombinant proteins interact with each other to form large (up to 1.9MDa) and stable baseplate assemblies. Some of these complexes were characterized by electron microscopy confirming their structural homogeneity as well as providing a picture of their overall molecular shapes and symmetry. Finally, using these results, we were able to highlight similarities and differences with the well characterized much larger baseplate of the myophage T4.

Two cutinase-like proteins secreted by Mycobacterium tuberculosis show very different lipolytic activities reflecting their physiological function

Cutinases are extracellular enzymes that are able to degrade cutin, a polyester protecting plant leaves and many kinds of lipids. Although cutinases are mainly found in phytopathogenic fungi or bacteria, 7 genes related to the cutinase family have been predicted in the genome of Mycobacterium tuberculosis. These genes may encode proteins that are involved in the complex lipid metabolism of the bacterium. Here, we report on the biochemical characterization of two secreted proteins of M. tuberculosis, Rv1984c and Rv3452, belonging to the cutinase family. Although their amino acid sequence shows 50% identity with that of the well-characterized cutinase from Fusarium solani pisi, and a high level of homology has been found to exist between these two enzymes, they show distinct substrate specificities. Rv1984c preferentially hydrolyzes medium-chain carboxylic esters and monoacylglycerols, whereas Rv3452 behaves like a phospholipase A(2), and it is able to induce macrophage lysis. The tetrahydrolipstatin inhibitor, a specific lipase inhibitor, abolishes the activity of both enzymes. Site-directed mutagenesis was performed to identify the catalytic triad of Rv1984c. Structural models for Rv1984c and Rv3452 were built, based on the crystal structure of F. solani cutinase, with a view to investigating the contribution of specific residues to the substrate specificity. Our findings open new prospects for investigating the physiological roles of cutinase-like proteins in the lipid metabolism and virulence of M. tuberculosis.

Refolding active human DNA polymerase nu from inclusion bodies

Human DNA polymerase nu (Pol nu) is a conserved family A DNA polymerase of uncertain biological function. Physical and biochemical characterization aimed at understanding Pol nu function is hindered by the fact that, when over-expressed in Escherichia coli, Pol nu is largely insoluble, and the small amount of soluble protein is difficult to purify. Here we describe the use of high hydrostatic pressure to refold Pol nu from inclusion bodies, in soluble and active form. The refolded Pol nu has properties comparable to those of the small amount of Pol nu that was purified from the soluble fraction. The approach described here may be applicable to other DNA polymerases that are expressed as insoluble inclusion bodies in E. coli.

Rapid matrix-assisted refolding of histidine-tagged proteins

The formation of inclusion bodies (IBs)--amorphous aggregates of misfolded insoluble protein--during recombinant protein expression, is still one of the biggest bottlenecks in protein science. We have developed and analyzed a rapid parallel approach for matrix-assisted refolding of recombinant His(6)-tagged proteins. Efficiencies of matrix-assisted refolding were screened in a 96-well format. The developed methodology allowed the efficient refolding of five different test proteins, including monomeric and oligomeric proteins. Compared to refolding in-solution, the matrix-assisted refolding strategy proved equal or better for all five proteins tested. Interestingly, specifically oligomeric proteins displayed significantly higher levels of refolding compared to refolding in-solution. Mechanistically, matrix-assisted folding seems to differ from folding in-solution, as the reaction proceeds more rapidly and shows a remarkably different concentration dependence--it allows refolding at up to 1000-fold higher protein concentration than folding in-solution.

Potent anti-HPV immune responses induced by tandem repeats of the HPV16 L2 (20 -- 38) peptide displayed on bacterial thioredoxin

The minor capsid protein L2 is a promising candidate for the construction of an anti-human papillomavirus (HPV) broadly protective vaccine for the prophylaxis of cervical cancer. However, L2-derived peptides are usually poorly immunogenic and extensive knowledge on the most relevant (cross)neutralizing epitope(s) is still needed. We systematically examined the immunogenicity and virus neutralization potential of six peptides encompassing the N-terminal (amino acids 1 -- 120) region of HPV16 L2 (20 -- 38; 28 -- 42; 56 -- 75; 64 -- 81; 96 -- 115; 108 -- 120) using bacterial thioredoxin (Trx) as a novel peptide scaffold. Mice antisera generated by 19 different Trx-L2 peptide fusions bearing one or multiple copies of each peptide were analyzed. Internal fusion to thioredoxin conferred strong immunogenicity to all the tested peptides, with a trend toward an increased immunogenicity for the multipeptide vs. the monopeptide forms of the various antigens. All Trx-L2 peptides induced HPV16 neutralizing antibodies in some of the immunized mice, but neutralization titers differed by more than two orders of magnitude. Trx-L2(20 -- 38) antisera were by far the most effective in HPV16 neutralization and did not differ significantly from those induced by a reference polypeptide covering the entire L2 (1 -- 120) region. The same antisera were also the most effective when challenged against the non-cognate HPV 18, 58, 45 and 31 pseudovirions. The data identify L2(20 -- 38) as the best (cross)neutralizing epitope among the six that were examined, and point to thioredoxin fusion derivatives of this peptide as excellent candidates for the formulation of a low-cost, broadly protective HPV vaccine.

Refolding solubilized inclusion body proteins

The vast majority of protein purification is now done with cloned, recombinant proteins expressed in a suitable host. The predominant host is Escherichia coli. Many, if not most, expressed proteins are found in an insoluble form called an inclusion body (IB). Since the target protein is often relatively pure in a washed IB, the challenge is not so much to purify the target, but rather to solubilize an IB and refold the protein into its native structure, regaining full biological activity. While many of the operations of this process are quite general (expression, cell disruption, IB isolation and washing, and IB solubilization), the precise conditions that give efficient refolding differ for each protein. This chapter describes the main techniques and strategies for achieving successful refolding.

Crystal structure of ORF12 from Lactococcus lactis phage p2 identifies a tape measure protein chaperone

We report here the characterization of the nonstructural protein ORF12 of the virulent lactococcal phage p2, which belongs to the Siphoviridae family. ORF12 was produced as a soluble protein, which forms large oligomers (6- to 15-mers) in solution. Using anti-ORF12 antibodies, we have confirmed that ORF12 is not found in the virion structure but is detected in the second half of the lytic cycle, indicating that it is a late-expressed protein. The structure of ORF12, solved by single anomalous diffraction and refined at 2.9-A resolution, revealed a previously unknown fold as well as the presence of a hydrophobic patch at its surface. Furthermore, crystal packing of ORF12 formed long spirals in which a hydrophobic, continuous crevice was identified. This crevice exhibited a repeated motif of aromatic residues, which coincided with the same repeated motif usually found in tape measure protein (TMP), predicted to form helices. A model of a complex between ORF12 and a repeated motif of the TMP of phage p2 (ORF14) was generated, in which the TMP helix fitted exquisitely in the crevice and the aromatic patches of ORF12. We suggest, therefore, that ORF12 might act as a chaperone for TMP hydrophobic repeats, maintaining TMP in solution during the tail assembly of the lactococcal siphophage p2.

Expression, purification, crystallization and preliminary X-ray characterization of a putative glycosyltransferase of the GT-A fold found in mycobacteria

Glycosidic bond formation is a ubiquitous enzyme-catalysed reaction. This glycosyltransferase-mediated process is responsible for the biosynthesis of innumerable oligosaccharides and glycoconjugates and is often organism- or cell-specific. However, despite the abundance of genomic information on glycosyltransferases (GTs), there is a lack of structural data for this versatile class of enzymes. Here, the cloning, expression, purification and crystallization of an essential 329-amino-acid (34.8 kDa) putative GT of the classic GT-A fold implicated in mycobacterial cell-wall biosynthesis are reported. Crystals of MAP2569c from Mycobacterium avium subsp. paratuberculosis were grown in 1.6 M monoammonium dihydrogen phosphate and 0.1 M sodium citrate pH 5.5. A complete data set was collected to 1.8 A resolution using synchrotron radiation from a crystal belonging to space group P4(1)2(1)2.

Cloning and expression of Tenebrio molitor antifreeze protein in Escherichia coli

A novel antifreeze protein cDNA was cloned by RT-PCR from the larva of the yellow mealworm Tenebrio molitor. The coding fragment of 339 bp encodes a protein of 112 amino acid residues and was fused to the expression vectors pET32a and pTWIN1. The resulted expression plasmids were transformed into Escherischia coli strains BL21 (DE3), ER2566, and Origami B (DE3), respectively. Several strategies were used for expression of the highly disulfide-bonded beta-helix-contained protein with the activity of antifreeze in different expression systems. A protocol for production of refolded and active T. molitor antifreeze protein in bacteria was obtained.

Protein production and purification

In selecting a method to produce a recombinant protein, a researcher is faced with a bewildering array of choices as to where to start. To facilitate decision-making, we describe a consensus 'what to try first' strategy based on our collective analysis of the expression and purification of over 10,000 different proteins. This review presents methods that could be applied at the outset of any project, a prioritized list of alternate strategies and a list of pitfalls that trip many new investigators.

Chapter 3. High-throughput protein purification for x-ray crystallography and NMR

In structural biology, the most critical issue is the availability of high-quality samples. "Structural-biology-grade" proteins must be generated in a quantity and quality suitable for structure determination using X-ray crystallography or nuclear magnetic resonance. The additional challenge for structural genomics is the need for high numbers of proteins at low cost where protein targets quite often have low sequence similarities, unknown properties and are poorly characterized. The purification procedures must reproducibly yield homogeneous proteins or their derivatives containing marker atom(s) in milligram quantities. The choice of protein purification and handling procedures plays a critical role in obtaining high-quality protein samples. Where the ultimate goal of structural biology is the same-to understand the structural basis of proteins in cellular processes, the structural genomics approach is different in that the functional aspects of individual protein or family are not ignored, however, emphasis here is on the number of unique structures, covering most of the protein folding space and developing new technologies with high efficiency. At the Midwest Center Structural Genomics (MCSG), we have developed semiautomated protocols for high-throughput parallel protein purification. In brief, a protein, expressed as a fusion with a cleavable affinity tag, is purified in two immobilized metal affinity chromatography (IMAC) steps: (i) first IMAC coupled with buffer-exchange step, and after tag cleavage using TEV protease, (ii) second IMAC and buffer exchange to clean up cleaved tags and tagged TEV protease. Size exclusion chromatography is also applied as needed. These protocols have been implemented on multidimensional chromatography workstations AKTAexplorer and AKTAxpress (GE Healthcare). All methods and protocols used for purification, some developed in MCSG, others adopted and integrated into the MCSG purification pipeline and more recently the Center for Structural Genomics of Infectious Disease (CSGID) purification pipeline, are discussed in this chapter.

The translation of recombinant proteins in E. coli can be improved by in silico generating and screening random libraries of a -70/+96 mRNA region with respect to the translation initiation codon

Recombinant protein translation in Escherichia coli may be limited by stable (i.e. low free energy) secondary structures in the mRNA translation initiation region. To circumvent this issue, we have set-up a computer tool called ‘ExEnSo’ (Expression Enhancer Software) that generates a random library of 8192 sequences, calculates the free energy of secondary structures of each sequence in the −70/+96 region (base 1 is the translation initiation codon), and then selects the sequence having the highest free energy. The software uses this ‘optimized’ sequence to create a 5′ primer that can be used in PCR experiments to amplify the coding sequence of interest prior to sub-cloning into a prokaryotic expression vector. In this article, we report how ExEnSo was set-up and the results obtained with nine coding sequences with low expression levels in E. coli. The free energy of the −70/+96 region of all these coding sequences was increased compared to the non-optimized sequences. Moreover, the protein expression of eight out of nine of these coding sequences was increased in E. coli, indicating a good correlation between in silico and in vivo results. ExEnSo is available as a free online tool.

DNA fragmentation-based combinatorial approaches to soluble protein expression Part I. Generating DNA fragment libraries

In addressing a new drug discovery target, the generation of tractable protein substrates for functional and structural analyses can represent a significant hurdle. Traditional approaches rely on protein expression trials of multiple variants in various systems, frequently with limited success. The increasing knowledge base derived from genomics and structural proteomics initiatives assists the bioinformatics-led design of these experiments. Nevertheless, for many eukaryotic polypeptides, particularly those with relatively few homologues, the generation of useful protein products can still be a major challenge. This review describes the basis of efforts to forge an alternative 'domain-hunting' paradigm, based upon combinatorial sampling of expression construct libraries derived by fragmentation of the encoding DNA template, namely the methods and considerations in generating fragment length DNA from target genes. An accompanying review focuses upon the expression screening of such combinatorial DNA libraries for the sampling of the corresponding set of protein fragments.

Confronting high-throughput protein refolding using high pressure and solution screens

Over-expression of heterologous proteins in Escherichia coli is commonly hindered by the formation of inclusion bodies. Nevertheless, refolding of proteins in vitro has become an essential requirement in the development of structural genomics (proteomics) and as a means of recovering functional proteins from inclusion bodies. Many distinct methods for protein refolding are now in use. However, regardless of method used, developing a reliable protein refolding protocol still requires significant optimization through trial and error. Many proteins fall into the category of "Challenging" or "Difficult to Express" and are problematic to refold using traditional chaotrope-based refolding techniques. This review discusses new methods for improving protein refolding, such as implementing high hydrostatic pressure, using small molecule additives to enhance traditional protein refolding strategies, as well as developing practical methods for performing refolding studies to maximize their reliability and utility. The strategies examined here focus on high-throughput, automated refolding screens, which can be applied to structural genomic projects.

A new Gateway vector and expression protocol for fast and efficient recombinant protein expression in Mycobacterium smegmatis

A major obstacle associated with recombinant protein over-expression in Escherichia coli is the production of insoluble inclusion bodies, a problem particularly pronounced with Mycobacterium tuberculosis proteins. One strategy to overcome the formation of inclusion bodies is to use an expression host that is more closely related to the organism from which the proteins are derived. Here we describe methods for efficiently identifying M. tuberculosis proteins that express in soluble form in Mycobacterium smegmatis. We have adapted the M. smegmatis expression vector pYUB1049 to the Gateway cloning system by the addition of att recombination recognition sequences. The resulting vector, designated pDESTsmg, is compatible with our in-house Gateway methods for E. coli expression. A target can be subcloned into pDESTsmg by a simple LR reaction using an entry clone generated for E. coli expression, removing the need to design new primers and re-clone target DNA. Proteins are expressed by culturing the M. smegmatis strain mc(2)4517 in autoinduction media supplemented with Tween 80. The media used are the same as those used for expression of proteins in E. coli, simplifying and reducing the cost of the switch to an alternative host. The methods have been applied to a set of M. tuberculosis proteins that form inclusion bodies when expressed in E. coli. We found that five of eight of these previously insoluble proteins become soluble when expressed in M. smegmatis, demonstrating that this is an efficient salvage strategy.

Expression in Escherichia coli, refolding and crystallization of Aspergillus niger feruloyl esterase A using a serial factorial approach

Hydrolysis of plant biomass is achieved by the combined action of enzymes secreted by microorganisms and directed against the backbone and the side chains of plant cell wall polysaccharides. Among side chains degrading enzymes, the feruloyl esterase A (FAEA) specifically removes feruloyl residues. Thus, FAEA has potential applications in a wide range of industrial processes such as paper bleaching or bio-ethanol production. To gain insight into FAEA hydrolysis activity, we solved its crystal structure. In this paper, we report how the use of four consecutive factorial approaches (two incomplete factorials, one sparse matrix, and one full factorial) allowed expressing in Escherichia coli, refolding and then crystallizing Aspergillus niger FAEA in 6 weeks. Culture conditions providing the highest expression level were determined using an incomplete factorial approach made of 12 combinations of four E. coli strains, three culture media and three temperatures (full factorial: 36 combinations). Aspergillus niger FAEA was expressed in the form of inclusion bodies. These were dissolved using a chaotropic agent, and the protein was purified by affinity chromatography on Ni column under denaturing conditions. A suitable buffer for refolding the protein eluted from the Ni column was found using a second incomplete factorial approach made of 96 buffers (full factorial: 3840 combinations). After refolding, the enzyme was further purified by gel filtration, and then crystallized following a standard protocol: initial crystallization conditions were found using commercial crystallization screens based on a sparse matrix. Crystals were then optimized using a full factorial screen.

Chemical chaperone-mediated protein folding: stabilization of P22 tailspike folding intermediates by glycerol

Polyol co-solvents such as glycerol increase the thermal stability of proteins. This has been explained by preferential hydration favoring the more compact native over the denatured state. Although polyols are also expected to favor aggregation by the same mechanism, they have been found to increase the folding yields of some large, aggregation-prone proteins. We have used the homotrimeric phage P22 tailspike protein to investigate the origin of this effect. The folding of this protein is temperature-sensitive and limited by the stability of monomeric folding intermediates. At non-permissive temperature (≥35°C), tailspike refolding yields were increased significantly in the presence of 1–4 mglycerol. At low temperature, tailspike refolding is prevented when folding intermediates are destabilized by the addition of urea. Glycerol could offset the urea effect, suggesting that the polyol acts by stabilizing crucial folding intermediates and not by increasing solvent viscosity. The stabilization effect of glycerol on tailspike folding intermediates was confirmed in experiments using a temperature-sensitive folding mutant protein, by fluorescence measurements of subunit folding kinetics, and by temperature up-shift experiments. Our results suggest that the chemical chaperone effect of polyols observed in the folding of large proteins is due to preferential hydration favoring structure formation in folding intermediates.

Expression, purification and crystallization of native and selenomethionine labeled Mycobacterium tuberculosis FGD1 (Rv0407) using a Mycobacterium smegmatis expression system

FGD1 is an F(420)-dependent glucose-6-phosphate dehydrogenase from Mycobacterium tuberculosis that has been shown to be essential for activation of the anti-TB compound PA-824. Initial attempts to produce recombinant FGD1 using Escherichia coli as a host was unsuccessful, but when the alternative host Mycobacterium smegmatis was used, soluble protein yields of 7 mg/L of culture were achieved. Both native and selenomethionine-substituted FGD1 were obtained by culturing M. smegmatis in autoinduction media protocols originally developed for E. coli. Using these media afforded the advantages of decreased handling, as cultures did not require monitoring of optical density and induction, and reduced cost by removing the need for expensive ADC enrichment normally used in mycobacterial cultures. Selenomethionine was efficiently incorporated at levels required for multiwavelength anomalous diffraction experiments used in crystal structure determination. As far as we are aware this is the first protocol for preparation of selenomethionine-substituted protein in mycobacteria. Native and selenomethionine-labeled FGD1 were successfully crystallized by vapor diffusion, with the crystals diffracting to 2.1 Angstrom resolution.

Presence of the propeptide on recombinant lysosomal dipeptidase controls both activation and dimerization

Lysosomal dipeptidase catalyzes the hydrolysis of dipeptides with unsubstituted terminals. It is a homodimer and binds zinc. Dimerization is an important issue in understanding the enzyme's function. In this study, we investigated the influence of the propeptide on the folding and dimerization of recombinant lysosomal dipeptidase. For this purpose, we separately cloned and overexpressed the mature protein and the proenzyme. The overexpressed proteins were localized exclusively to insoluble inclusion bodies. Refolding of the urea-solubilized inclusion bodies showed that only dipeptidase lacking the propeptide was dimeric. The soluble renatured proenzyme was a monomer, although circular dichroism and fluorescence spectra of the proenzyme indicated the formation of secondary and tertiary structure. The propeptide thus controls dimerization, as well as activation, of lysosomal dipeptidase.