The transmembrane topology of the sn-glycerol-3-phosphate permease of Escherichia coli analysed by phoA and lacZ protein fusions

The cloning and DNA sequence of the gene for the glutathione-regulated potassium-efflux system KefC of Escherichia coli

The kefC gene of Escherichia coli encodes a potassium-efflux system that is regulated by glutathione metabolites. The close proximity of the E. coli kefC gene to the folA gene, encoding dihydrofolate reductase, has been utilized to clone the structural gene for the system from a Clarke-Carbon plasmid. The cloned gene has been refined to a region of DNA approximately 2.1 kb in length using exonuclease III-generated deletions and random MudII1734 (lacZ) insertions. The direction of transcription has been deduced from the orientation of the Mu insertions in the cloned DNA. A hybrid protein consisting of approximately two thirds of the KefC protein fused to beta-galactosidase has been shown to be membrane-located. The DNA sequence of the gene has been determined and an open reading frame of 1.86 kb has been located which could encode a protein of 620 amino acids (79010 Da). Using the T7 expression system a membrane protein, of apparent molecular mass 55-60 kDa, has been shown to be encoded by the kefC gene. The predicted protein sequence shows a highly hydrophobic amino-terminus and a strongly hydrophilic carboxy-terminus. Comparison of the amino acid sequence of the kefC gene product with those of two glutathione-utilizing enzymes, glyoxalase and dehalogenase, has revealed some similarities.

Cloning, nucleotide sequence, and characterization of mtr, the structural gene for a tryptophan-specific permease of Escherichia coli K-12

The mtr gene of Escherichia coli K-12 encodes an L-tryptophan-specific permease. This gene was originally identified through the isolation of mutations in the 69-min region of the chromosome, closely linked to argG. Cells with lesions in mtr display a phenotype of 5-methyltryptophan resistance. The mtr gene was cloned by using the mini-Mu system. The amino acid sequence of Mtr (414 codons), deduced by DNA sequence analysis, was found to be 33% identical to that of another single-component transport protein, the tyrosine-specific permease, TyrP. The hydropathy plots of the two permeases were similar. Possible operator sites for the tyrosine and tryptophan repressors are situated within the region of DNA that is likely to be the mtr promoter.

Control of pilus expression in Neisseria gonorrhoeae as an original system in the family of two-component regulators

We have previously reported the identification of two genes, pilA and pilB, which act in trans to regulate pilus expression in Neisseria gonorrhoeae. Here we show that PilA and PilB have amino acid sequence similarities with members of the two component 'sensor-regulator' family of proteins. PilB has homology with histidine kinase sensors. Alkaline phosphatase fusions to the predicted sensor and transmitter domains are described. Their PhoA activity and cellular location suggest that PilB is inserted in the cytoplasmic membrane and predict periplasmic and cytoplasmic locations for the sensor and the transmitter domains, respectively. PilA has homology with response regulators in its N-terminal part, and with components of the eukaryotic protein secretory apparatus (SRP 54 and SRP receptor) as well as two Escherichia coli gene products in its C-terminal part. In particular, it contains a putative GTP-binding site. Mini-transposon insertions into different regions of pilA were obtained. The phenotypes and genotypes of these mutants and preliminary biochemical studies of the gene products of two of these mutants lend further support to the hypothesis that PilA is a DNA-binding response regulator and confirm that it participates in an essential function in the bacterium.

Microbes and membrane biology

General principles of membrane function have been elucidated by the study of lactic acid bacteria. In this review, the operation and function of ion pumps, secondary transport systems and solute ATPases will be discussed. Despite their differences in kinetics and mechanisms between the transport systems, structural similarities can be recognized among these proteins irrespective of whether they originate from prokaryotes, lower or higher eukaryotes.

Anion exchange reactions in bacteria

Bacterial anion exchange now includes both "carboxylate-linked" reactions in which there is an antiport of mono- and dicarboxylic acids, and "Pi-linked" reactions that build on phosphate (Pi) and organic phosphates. To illustrate the general features of this expanding class, this article discussed the biochemistry, physiology, and molecular biology of Pi-linked antiporters that accept glucose 6-phosphate (G6P) as their primary substrate. Kinetic and biochemical analysis suggests that Pi-linked exchangers have a bifunctional active site that accepts a pair of negative charges. For this reason, exchange stoichiometry moves between the limits of 2:1 and 2:2 to reflect the ratio of mono- and divalent substrates at either membrane surface. This results in a particularly interesting reaction sequence in vivo, where, because cytosolic pH is relatively alkaline, one can expect the asymmetric exchange of two monovalent G6P anions against a single divalent G6P. In this way, an otherwise futile self-exchange of G6P gives a net flux driven (indirectly) by the pH gradient. Despite this biochemical and physiological complexity, Pi-linked carriers resemble all other secondary carriers at a molecular level. Indeed, sequence analysis leads one to infer a common (albeit low resolution) structural theme in which each functional unit has two sets of six trans-membrane alpha helices separated by a central hydrophilic loop. Present examples show that this topology can derive from either a single protein, as is typical in bacteria, or from pairs of identical subunits, as found in mitochondria and chloroplasts. The finding of this common structure should make it possible to build detailed structural models that have implications for all membrane carrier proteins.

A novel membrane-associated threonine permease encoded by the tdcC gene of Escherichia coli

A novel L-threonine transport system is induced in Escherichia coli cells when incubated in amino acid-rich medium under anaerobic conditions. Genetic and biochemical analyses with plasmids harboring mutations in the anaerobically expressed tdcABC operon indicated that the tdcC gene product was responsible for L-threonine uptake. Competition experiments revealed that the L-threonine transport system is also involved in L-serine uptake and is partially shared for L-leucine transport; L-alanine, L-valine, and L-isoleucine did not affect L-threonine uptake. Transport of L-threonine was inhibited by the respiratory chain inhibitors KCN and carbonyl cyanide m-chlorophenylhydrazone and was Na+ independent. These results identify for the first time an E. coli gene encoding a permease specific for L-threonine-L-serine transport that is distinct from the previously described threonine-serine transport systems. A two-dimensional topological model predicted from the amino acid composition and hydropathy plot showed that the TdcC polypeptide appears to be an integral membrane protein with several membrane-spanning domains exhibiting a striking similarity with other bacterial permeases.

Recent studies of the cytochrome o terminal oxidase complex of Escherichia coli

The cytochrome o complex is the predominant terminal oxidase in the aerobic respiratory chain of Escherichia coli when the bacteria are grown under conditions of high aeration. The oxidase is a ubiquinol oxidase and reduces molecular oxygen to water. Electron transport through the enzyme is coupled to the generation of a protonmotive force. The purified cytochrome o complex contains four or five subunits, two protoheme IX (heme b) prosthetic groups, plus at least one Cu. The subunits are all encoded by the cyo operon. Sequence comparisons show that the cytochrome o complex is closely related to the aa3-type cytochrome c oxidase family. Gene fusions have been used to define the topology of each of the gene products. Subunits I, II, III and IV are proposed to have 15, 2, 5 and 3 transmembrane spans, respectively. The fifth gene product (cyoE) encodes a protein with 7 membrane spanning segments, and this may also be a subunit of this enzyme. Fourier transform infrared spectroscopy has been used to monitor CO bound in the active site where oxygen is reduced. These data provide definitive proof that the cytochrome o complex has a heme-copper binuclear center, similar to that present in the aa3-type cytochrome c oxidases. Site-directed mutagenesis is being utilized to define which amino acids are ligands to the heme iron and copper prosthetic groups.

lac permease of Escherichia coli: topology and sequence elements promoting membrane insertion

The membrane topology of Escherichia coli lac permease was analyzed using a set of 36 lac permease-alkaline phosphatase (lacY-phoA) gene fusions. The level of enzymatic activity of alkaline phosphatase fused to a cytoplasmic membrane protein appears to reflect whether the fusion junction site normally faces the cytoplasm or periplasm. The alkaline phosphatase activities of cells expressing the lacY-phoA fusions distinguish between models previously proposed for the topology of lac permease and favor one with 12 transmembrane segments. This model is fully compatible with the results of earlier biochemical and immunological studies. The properties of fusions with junctions spanning two of the transmembrane segments at 2- or 3-amino acid intervals indicate that approximately half of the residues of either segment (9-11 amino acids) suffices to promote alkaline phosphatase translocation across the membrane. The additional transmembrane segment amino acids that are not required for this membrane insertion process may normally be needed in unfused lac permease after insertion for stable association with the membrane.

Topology of the Escherichia coli uhpT sugar-phosphate transporter analyzed by using TnphoA fusions

The Escherichia coli uhpT protein catalyzes the active transport of sugar-phosphates by an obligatory exchange mechanism. To examine its transmembrane topology, we isolated a collection of uhpT-phoA fusions encoding hybrid proteins of different lengths from the N terminus of UhpT fused to alkaline phosphatase by using transposon TnphoA. These fusions displayed different levels of alkaline phosphatase activity, although comparable levels of full-length UhpT-PhoA proteins were produced in maxicells of both high- and low-activity fusions. The full-length protein species were unstable and were degraded to the size of the alkaline phosphatase moiety in the case of a high-activity fusion or to small fragments in the case of a low-activity fusion. The enzyme activity present in low-activity fusions appeared to result from export of a small proportion of the fusion proteins to the periplasmic space. Although fusions were not obtained in all predicted extramembranous loops, the deduced topology of UhpT was consistent with a model of 12 membrane-spanning regions oriented with the amino and carboxyl termini in the cytoplasm.

A consensus structure for membrane transport

Combined information from biochemical and molecular biological experiments reveals a consistent structural rhythm that underlies the construction of all membrane carriers and perhaps all transport systems. Biochemical work shows that while some carrier proteins function as monomers, others operate as dimers. But despite this variation, all examples can be modelled as having a pair of membrane-embedded domains, each of which contains an array of (about) six transmembrane helical elements. This pattern is best documented among membrane carriers, where the minimal functional unit is known in a reasonable number of cases. Nevertheless, the same conclusion is likely to characterize other solute transporters. These unexpected correlations suggest that all membrane carriers, including those that take part in "energy coupling", have a uniform structural design on which is superimposed a variety of kinetic and biochemical mechanisms.

Anion-exchange mechanisms in bacteria

This article discusses the physiological, biochemical, and molecular properties of bacterial anion-exchange reactions, with a particular focus on a family of phosphate (Pi)-linked antiporters that accept as their primary substrates sugar phosphates such as glucose 6-phosphate (G6P), mannose 6-phosphate, or glycerol 3-phosphate. Pi-linked antiporters may be found in both gram-positive and gram-negative cells. As their name suggests, these exchange proteins accept both inorganic and organic phosphates, but the two classes of substrate interact very differently with the protein. Thus, Pi is always accepted with a relatively low affinity, and when it participates in exchange, it is always taken as the monovalent anion. By contrast, when the high-affinity organic phosphates are used, these same systems fail to discriminate between monovalent and divalent forms. Tests of heterologous exchange (e.g., Pi: G6P) indicate that these proteins have a bifunctional active site that accepts a pair of negative charges, whether as two monovalent anions or as a single divalent anion. For this reason, exchange stoichiometry moves between limits of 2:1 and 2:2, according to the ratio of mono- and divalent substrates at either membrane surface. Since G6P has a pK2 within the physiological range (pK of 6.1), this predicts a novel reaction sequence in vivo because internal pH is more alkaline than external pH. Accordingly, one expects an asymmetric exchange as two monovalent G6P anions from the relatively acidic exterior move against a single divalent G6P from the alkaline interior. In this way an otherwise futile self-exchange of G6P can be biased towards a net inward flux driven (indirectly) by the pH gradient. Despite the biochemical complexity exhibited by Pi-linked antiporters, they resemble all other secondary carriers at a molecular level and show a likely topology in which two sets of six transmembrane alpha-helices are connected by a central hydrophilic loop. Speculations on the derivation of this common form suggest a limited number of structural models to accommodate such proteins. Three such models are presented.

Alkaline phosphatase fusions: sensors of subcellular location

Alkaline phosphatase fusions allow genes to be identified solely on the basis of their protein products being exported from the cytoplasm. Thus, the use of such fusions helps render biological processes which involve cell envelope and secreted proteins accessible to a sophisticated genetic analysis. Furthermore, alkaline phosphatase fusions can be used to locate export signals. Specifying such signals is an important component of studies on the structure of individual cell envelope proteins. The basis of the alkaline phosphatase fusion approach is the finding that the activity of the enzyme responds differently to different environments. Thus, the activity of the fusion protein gives evidence as to its location. This general approach of using sensor proteins which vary in their function, depending on their environment, could be extended to the study of other sorts of problems. It may be that certain enzymes will provide an assay for localization to a particular subcellular compartment, if the environment of the compartment differs from that of others. For instance, the lysosome is more acidic than other intracellular organelles. A gene fusion system employing a reporter enzyme that could show activity only at the pH of the lysosome could allow the detection of signals determining lysosomal localization. Analogous types of enzymes may be used as probes for other subcellular compartments.

Use of phoA fusions to study the topology of the Escherichia coli inner membrane protein leader peptidase

A topology of the Escherichia coli leader peptidase has been previously proposed on the basis of proteolytic studies. Here, a collection of alkaline phosphatase fusions to leader peptidase is described. Fusions to the periplasmic domain of this protein exhibit high alkaline phosphatase activity, while fusions to the cytoplasmic domain exhibit low activity. Elements within the cytoplasmic domain are necessary to stably anchor alkaline phosphatase in the cytoplasm. The amino-terminal hydrophobic segment of leader peptidase acts as a weak export signal for alkaline phosphatase. However, when this segment is preceded by four lysines, it acts as a highly efficient export signal. The coherence of in vitro studies with alkaline phosphatase fusion analysis of the topology of leader peptidase further indicates the utility of this genetic approach to membrane protein structure and insertion.

Analysis of C4-dicarboxylate transport genes in Rhizobium meliloti

A 5.1 kbp DNA fragment was isolated which complemented C4-dicarboxylate transport mutants (dct) of Rhizobium meliloti. Characterization of this fragment by subcloning, transposon mutagenesis, and complementation analysis revealed three loci, designated dctA, dctB, and dctD. TnphoA-generated alkaline phosphatase fusions to dctA suggested that this gene encodes the structural transport protein and allowed the determination of its direction of transcription. Analysis of the fusions in various mutant backgrounds demonstrated that dctB, dctD, and ntrA products are required for dctA expression. The dctA fusion was constitutively expressed in a dctA mutant background, but was not expressed in dctA dctB or dctA dctD double mutants. This suggests that the constitutive expression in a dctA mutant background is mediated through dctB and dctD. Three independent second-site Dct+ revertant mutations in ntrA mutant strains mapped to the dct locus. Succinate transport in these revertant strains was constitutive, whereas in the wild type, succinate transport was inducible. These results are consistent with the direct requirement of the ntrA gene product for dctA expression. Alfalfa plants inoculated with the dctB and dctD mutants showed reduced nitrogen-fixing activity. Nodules induced by dctA mutants failed to fix nitrogen. These symbiotic phenotypes are consistent with previous suggestions that dctA expression in bacteroids can occur independently of dctB and dctD.

The proline transport protein of Aspergillus nidulans is very similar to amino acid transporters of Saccharomyces cerevisiae

In Aspergillus nidulans, the gene prnB encoding the major proline transport system is one of a cluster of four genes necessary and sufficient for the utilization of proline as sole nitrogen and/or carbon source. The prn cluster has been cloned and the sequence and transcript map of the prnB gene are presented in this paper. The predicted translated sequence consists of 570 amino acids, resulting in a molecular weight of 63,028 Daltons. Its hydropathy profile shows 10 hydrophobic segments typical of integral membrane proteins. No N-terminal hydrophobic signal peptide is present, the N-terminal and C-terminal ends of the protein being hydrophilic. Similar results were previously found for the arginine and histidine transporters of Saccharomyces cerevisiae, with which the prnB transporter shares regions of highly conserved amino acid sequences. Using S1 mapping and Northern blot analyses, we confirm the presence of a unique inducible prnB transcript of 1.9 kb.

Convenient transfer of lacZ-gene fusions to phage M13 by in vivo recombination and their use for nucleotide sequencing

We describe a method that facilitates the sequencing of lacZ fusion joints based on in vivo subcloning onto phage M13. The method is useful for lacZ fusions that are isolated with the transposable lambda placMu phage into plasmids carrying the pBR322 bla gene. In vivo cloning of lacZ fusions is accomplished by recombination with two M13 phages carrying 5' or 3' segments of the bla gene, adjacent but differing in orientation to lacZ'. The presented method allows rapid sequencing of many fusion joints without subcloning in vitro.