A systematic review on survival and success rates of implants placed immediately into fresh extraction sockets after at least 1 year

Immediately loaded implants simultaneously placed in fresh extraction and healed sites supporting four-implant-supported fixed mandibular prostheses using the all-on-4 concept: A 5-year prospective study

OBJECTIVES

To evaluate the peri-implant marginal bone level for immediately loaded implants placed simultaneously in both fresh extraction sites (FES) and healed sites (HS) supporting a 4-implant supported mandibular fixed prosthesis (4-ISFMP) using the all-on-4 concept.

MATERIAL AND METHODS

A 5-year prospective study was conducted in 24 patients (96 implants) treated with 4-ISFMP including 55 implants inserted in FES and 41 implants in HS. At implant placement (baseline) and at the 1^st -, 3^rd - and 5^th -year follow-up examinations, peri-implant marginal bone level was evaluated radiographically and compared between placement in FES and HS. Marginal bone loss was calculated as the difference in the marginal bone level evaluated at the follow-up periods. Additionally, implant and prosthesis survival rates as well as the presence of peri-implant mucositis (bleeding on probing+[BOP]) and peri-implantitis (BOP+ >2 mm MBL) were evaluated.

RESULTS

22/24 patients with 88/96 implants (dropout rate: 8.3%) were continually followed for 5 years (survival rate: 100%). Radiographically measured marginal bone level differed significantly between FES and HS at implant placement (1.46 ± 0.80 mm vs. 0.60 ± 0.70 mm; p < .001), at the 1-year (-0.04 ± 0.14 mm vs. -0.18 ± 0.20 mm; p = .002) and 3-year (-0.26 ± 0.49 mm vs. -0.58 ± 0.48 mm, p = .049), but not at the 5-year evaluation (-0.90 ± 0.66 mm vs. -1.00 ± 0.59 mm, p = .361). The marginal bone loss differed significantly (p < .001) between FES and HS between implant placement and the 1-year evaluation but not for the 1- to 3-year (p > .99) and the 3- to 5-year period (p = .082). At the 5-year follow-up evaluation, no implant/prosthesis failed (100% survival) and peri-implant mucositis and peri-implantitis were noted in 41.2% and 11.7% at patient level and in 17.6% and 4.5% at implant level respectively.

CONCLUSION

Implants placed in FES showed a prolonged peri-implant remodelling process but provided for similar peri-implant marginal bone levels as implants placed in HS at the 5-year evaluation for immediately loaded 4-ISFMP.

Programmed core-shell electrospun nanofibers to sequentially regulate osteogenesis-osteoclastogenesis balance for promoting immediate implant osseointegration

The biology of immediate post-extraction implant osseointegration is mediated by a coordinated cascade of osteoblast-osteoclast interactions. The aim of this study was to develop a dual-delivery system that allowed sequential release of substance P (SP) to promote bone regeneration and alendronate (ALN) to reduce bone resorption, which will improve the implant osseointegration. We used coaxial electrospinning to fabricate the core-shell poly lactic-co-glycolic acid (PLGA)/gelatin nanofibers, which consists of SP in the shell and ALN in the core. This programmed delivery system was shown to release SP and ALN sequentially to match the spatio-temporal specificity of bone healing. The migration assay demonstrated that the SP-ALN dual-delivery system increased bone marrow mesenchymal stem cells (BMSCs) transmigration. Besides, the expression of osteogenic/osteoclastic markers, Alizarin Red staining, tartrate-resistant acid phosphatase (TRAP) staining, F-actin staining and bone resorption experiment showed that the dual-delivery system can render a microenvironment favorable for osteogenic differentiation and adverse to osteoclastogenesis. Using a rat immediate implant model, we validated the promoted osteogenic property and osseointegration around the implants of SP-ALN dual-delivery system by micro-computed tomography (micro-CT) and histological analysis. These findings suggest that the dual-delivery system with time-controlled release of SP and ALN by core-shell nanofibers provides a promising strategy to facilitate immediate implant osseointegration through favorable osteogenesis. STATEMENT OF SIGNIFICANCE: Immediate implant placement is potentially challenged by the difficulties in achieving primary implant stability and early osteogenesis. Initial period of osteointegration is regulated by osteoblastic/osteoclastic cells resulting in a coordinated healing process. To have an efficient bone regeneration, the coaxial electrospinning was used to fabricate a programmed dual-delivery system. The SP released rapidly and favored for BMSCs migration and osteogenic differentiation, while the sustained release of ALN can reduce the bone resorption. The rat immediate implant model indicated that the SP-ALN dual-delivery system could present the promoted peri‑implant osteogenic property and osseointegration through modulating the osteogenesis-osteoclastogenesis balance. This work highlights the sequential dual delivery of SP and ALN has a promising potential of achieving enhanced osseointegration for immediate implant placement.

Linear and profilometric changes of the mucosa following soft tissue augmentation in the zone of aesthetic priority: A systematic review and meta-analysis

OBJECTIVES

To assess the outcomes of soft tissue augmentation, in terms of change in level and thickness of mid-buccal mucosa, at implants sites in the zone of the aesthetic priority.

MATERIAL AND METHODS

MEDLINE, EMBASE and Cochrane Central Register of Controlled Trials databases were searched (last search on 1 June 2020). Inclusion criteria were studies reporting outcomes of different materials and timing of grafting in patients undergoing soft tissue augmentation at implant sites in the aesthetic zone with a follow-up of ≥1 year after implant placement. Outcome measures assessed included changes in level and thickness of mid-buccal mucosa, implant survival, peri-implant health and patients' satisfaction.

RESULTS

Eighteen out of 2,185 articles fulfilled the inclusion criteria. Meta-analysis revealed a significant difference in vertical mid-buccal soft tissue change (0.34 mm, 95% CI: 0.13-0.56, p = .002) and mid-buccal mucosa thickness (0.66 mm, 95% CI: 0.35-0.97, p < .001) following immediate implant placement in favour of the use of a graft versus no graft. Mean difference in mid-buccal mucosa level following delayed implant placement (0.17 mm, 95% CI: 0.01-0.34, p = .042) was also in favour of the use of a graft versus no graft. With regard to mucosa thickness, the use of a graft was not in favour compared with no graft following delayed implant placement (0.22 mm, 95% CI: -0.04-0.47, p = .095). Observed changes remained stable in the medium term.

CONCLUSION

Soft tissue augmentation in the zone of the aesthetic priority results in less recession and a thicker mid-buccal mucosa following immediate implant placement and less recession in mid-buccal mucosa following delayed implant placement compared with no graft.

Immediate Implant Placement and Provisionalization in the Esthetic Zone: A 6.5-Year Follow-Up and Literature Review

The success of dental implant therapy in the esthetic zone requires not only functional osseointegration but also a satisfactory esthetic outcome. To establish harmony, balance, and continuity of gingival architecture between an implant restoration and the adjacent natural dentition is challenging. Immediate implant placement and provisionalization following tooth extraction have been documented as a predictable treatment modality, with fewer surgical interventions needed, to replace a missing tooth in the esthetic zone. This case report illustrates immediate implant placement and provisionalization to replace a failing maxillary right central incisor while maintaining optimal gingival esthetics. The maxillary right central incisor was extracted without flap elevation to minimize soft and hard tissue trauma. Immediately afterwards, the implant was installed using a surgical stent and restored with a provisional crown that had no occlusal contacts. During healing, no significant adverse effects were observed clinically or radiographically. This proposed treatment modality provided the patient with immediate esthetics, function, and comfort without any complications during a follow-up period of 6.5 years.

Immediate implant placement following tooth extraction with simultaneous lateral sinus augmentation: a retrospective clinical study after at least 1 year of loading

Background

Lateral sinus augmentation is necessary when the residual bone height is insufficient in the posterior maxilla. Immediate implant placement following tooth extraction with lateral sinus augmentation will shorten the number of operations and treatment time.

Purpose

To evaluate radiologic and clinical results for at least 1 year after loading in patients who underwent tooth extraction, implant placement, and lateral sinus augmentation at the same time.

Materials and methods

We retrospectively evaluated 35 implants placed in 25 patients. Preoperative and postoperative CBCT were compared and analyzed for residual bone height (RBH) and increased bone height (IBH), the initial torque value (ITV), and the implant stability quotient (ISQ). A comparative evaluation was performed between a 1-stage (non-submerged) group and a 2-stage (submerged) group. After loading for at least 1 year, clinical and radiological evaluations were performed to evaluate the survival rate.

Results

One of the 35 implants failed in osseointegration, and the remaining 34 showed successful results. The failure-free survival rate at 1 year was 97.06% (95% CI, 91.38-100.0%). The RBH ranged from 3.1 to 9.6 mm (mean, 5.62 ± 1.68 mm), and the IBH ranged from 3 to 15.3 mm (mean, 8.87 ± 2.74 mm). Among the RBH, ITV, ISQ, treatment period, final bone height, and failure evaluation by stage of implant placement, only ISQ showed statistical significance between the groups (p < .001). A comparison of RBH, ITV, and ISQ, regardless of group, showed that each value tended to increase, but there were no statistically significant differences.

Conclusions

Immediate implant placement following tooth extraction with simultaneous lateral sinus augmentation is considered reliable even though the procedures had been performed at the same time.

Implants Survival Rate in Regenerated Sites with Innovative Graft Biomaterials: 1 Year Follow-Up

In thirteen different dental clinics in Singapore, Spain, Czech Republic and Italy, 504 patients were selected, and 483 dental implants were placed in maxillary sites after alveolar socket preservation (ASP) procedures with an autologous demineralized tooth extracted as graft material from an innovative Tooth Transformer device was obtained. All procedures used were reported in n°638 Ethical Committee surgical protocol of University of Chieti and approved. After 4 months, at dental implant placing, bone biopsies were performed to evaluate the histologic outcomes, and 12 months after implant loading, global implant survival rate, failure percentage and peri-implant bone loss were detected. After ASP, only 27 post-operative complications were observed and after 4 months, bone biopsy histomorphometric analysis showed a high percentage of bone volume (BV) 43.58 (±12.09), and vital new bone (NB) 32.38 (±17.15) with an absence of inflammation or necrosis areas. Twelve months after loading, only 10 dental implants failed (2.3%), with a 98.2% overall implant survival rate, nine cases showed mucositis (1.8%) and eight showed peri-implantitis (1.6%). At mesial sites, 0.43 mm (±0.83) of bone loss around the implants was detected and 0.23 mm (±0.38) at the distal sites with an average value of 0.37 mm (±0.68) (p > 0.568). Several studies with a longer follow-up will be necessary to confirm the preliminary data observed. However, clinical results seem to suggest that the post-extraction socket preservation procedure using innovative demineralized autologous tooth-derived biomaterial may be a predictable procedure to produce new vital bone able to support dental implant rehabilitation of maxilla edentulous sites.

The effect of soft tissue augmentation on the clinical and radiographical outcomes following immediate implant placement and provisionalization: a systematic review and meta-analysis

Background

Nowadays, due to the esthetic and social demands of patients, conventional staged protocols seem to be increasingly replaced by faster, one-step protocols. The purpose of the present systematic review is to assess the peri-implant soft tissue changes after immediate implant placement and provisionalization (IIPP) comparing patients treated with or without a sub-epithelial connective tissue graft (SCTG) when replacing a single tooth in the esthetic region.

Methods

The present systematic review was written following the PRISMA checklist. Immediate implants placed with a connective tissue graft and without one were compared. The researched primary outcomes were the mid-buccal mucosa level (MBML) facial soft tissue thickness (FSTT) and marginal bone loss (MBL). The weighted mean differences (WMD) were estimated for all three outcomes.

Results

The change in the mid-buccal mucosa level in the intervention group was significantly higher (WMD 0.54; 95% CI 0.33–0.75), with no indication of heterogeneity (I² = 16%). The facial soft tissue thickness increased significantly in the intervention group (WMD 0.79; 95% CI 0.37–1.22). The marginal bone loss was significantly higher in the control group (WMD 0.13; 95% CI 0.07–0.18), with no indication of heterogeneity (I² = 0%).

Conclusions

The results of the meta-analyses showed a statistically significant reduced change of the marginal bone loss and vestibular recession, as well as higher soft tissue thickness, when a graft was used. The included studies had a short observation time; therefore, studies with longer follow-ups are needed to confirm these findings.

Potential Circumferential Bone Engagement following Tooth Extraction in the Posterior Mandible: Computed Tomography Assessment

Background and Objectives: Immediate implant placement (IIP) is a popular surgical procedure with a 94.9–98.4% survival rate and 97.8–100% success rate. In the posterior mandible, it poses a risk of injury to adjacent anatomical structures if the implant engages apical bone. This study sought to assess the implant dimensions that allow for circumferential bone engagement at each position in the posterior mandible without additional apical drilling. Materials and Methods: An observational, cross-sectional study design was used. The pre-extraction cone beam computed tomography scans of 100 candidates for IIP were analyzed. Measurements of each root of the posterior mandibular second premolar, first molar, and second molar were taken from three aspects: buccolingual, mesiodistal, and vertical. Two-sided p values < 0.05 were considered statistically significant. Results: A total of 478 mandibular teeth and 781 roots were assessed. Based on Straumann^® BLX/BLT implant-drilling protocols, predicted rates of radiological circumferential engagement (RCE) were 96% for implants 5 mm in diameter in the second premolar root position; 94% for implants 4.0–4.2 mm in diameter in the first molar root position; and 99% for implants 4.5–4.8 mm in diameter in the second molar root position. Corresponding rates of achieving an available implant length (AIL) of 10 mm were 99%, 90%, and 86%. Patients <40 years old were at higher risk of lower RCE and lower AIL (p < 0.005) than older patients for all roots measured. Conclusions: The high primary stability prediction rates based on the calculation of RCE and AIL support the use of IIPs without further apical drilling in the posterior mandible in most cases.

Clinical application study of immediate implantation without bone grafting in maxillary molars: a clinical study with one-year follow up

Our aim was to evaluate the clinical effect and feasibility of immediate implant placement combined with flap surgery with no bone grafting and non-submerged healing in the maxillary molar area. Thirty-five patients with failed single teeth in the molar area were selected. After minimally invasive extraction of the tooth, the flaps were elevated, and an implant inserted immediately; thereafter a healing abutment was connected. The mucoperiosteal flaps were sutured around the abutment without tension, and a permanent repair was performed six months later. During the study period, the implant survival rate, cone-beam computed tomography (CBCT) data, torque value, and the results of a subjective satisfaction survey conducted with a visual analogue scale (VAS), were evaluated to assess the procedure's therapeutic effect and feasibility. All 35 teeth were successfully implanted immediately after flap surgery. The mean (SD) torque value was 42.79 (5.70) N∙cm at the time of placement. During the six-month follow up and after one year of restoration, all 35 teeth showed no loosening, shedding of implants and restoration, or inflammation around the site. The mean (SD) value of the bony space around the implant immediately after the operation was 2.47 (0.56) mm. The bony spaces were filled with new bone after six months postoperatively. The mean (SD) VAS for satisfaction was 8.71 (1.05). Immediate implant placement combined with flap surgery without bone grafting and non-submerged healing is feasible for the maxillary molar area and produces a satisfactory clinical effect.

Risk assessment of labial bone perforation in the anterior mandibular region: a virtual immediate implant placement study

BACKGROUND

This study investigated the prevalence of labial bone perforation (LBP) related to the associated anatomic factors in anterior mandibular region using a virtual immediate implant placement procedure.

METHODS

Series qualified CBCT images of 149 participants (894 teeth) were selected to analyze the assigned anatomical parameters, including concavity depth, concavity angle, torque, and deep bone thickness. Four classes of crestal and radicular dentoalveolar bone phenotypes (CRDAPs) of mandibular anterior teeth were categorized according to the thickness of dentoalveolar bone at both crestal and radicular zones. Data were adjusted for categorical (gender and CRDAP) and continuous (age, cavity angle, cavity depth, and deep bone thickness) variables using a multivariable logistic regression analysis with generalized estimating equation method.

RESULTS

The overall probability of LBP after virtual implant placement was 21.6%. There is statistically significant higher prevalence of LBP at canine (28.5%) and CRDAP class II (29.2%) regions (p < 0.001). After adjusting confounding variables, CRDAP class II and class IV regions are more likely to have LBP when compared with CRDAP class I (control) regions (p < 0.01). The risk of LBP at canine site is 6.31 times more likely than at the central incisor (control) (p < 0.01).

CONCLUSIONS

Using a virtual immediate implant placement technique, the prevalence of LBP is significantly higher at the mandibular canine site and thin radicular dentoalveolar phenotype in the anterior mandibular region.

Immediate implant placement in fresh alveolar sockets with a minimal split-thickness envelope flap: A randomised controlled clinical trial

OBJECTIVES

Comparing PES/WES scores, modified success rate, survival, success, buccal bone thickness and patient-reported outcomes of immediate dental implants placed in fresh alveolar sockets using a flap or a minimal split-thickness envelope flap (MSTEF).

MATERIALS AND METHODS

Implants following random assignment into a flap or MSTEF group were placed immediately in anterior and premolar areas. Guided bone regeneration and autogenous connective tissue graft were used in all cases. A temporary prosthesis was provided followed by the final prosthesis at 16-18 weeks. Success and survival rates together with radiographic buccal bone thickness and patient satisfaction were evaluated at 12-month post-loading. The aesthetic outcome was evaluated through the Pink (PES) and White (WES) Aesthetic Score by 8 blind clinicians of different training background and incorporated in modified success criteria.

RESULTS

28 implants were placed on 28 patients. No statistically significant differences were noted in PES (10.54 control versus 10.80 test), WES scores (6.97 control versus 6.95 test) or success criteria including aesthetic parameters (modified success criteria) for the different specialty groups (Range 69%-92%). In addition, no statistically significant differences were noted in survival (100%), success (100%), buccal wall thickness between control (0.72 ± 0.22) and test group (0.92 ± 0.31) and patients' reported outcomes.

CONCLUSIONS

Immediate dental implant treatment with flap/ MSTEF provided similar mean PES/WES scores, modified success rate, survival, mean buccal bone levels and patients' satisfaction. However, aesthetic failures were common in both groups.

Alveolar ridge preservation: an overview of systematic reviews

The aim of this overview was to assess the methodological quality of systematic reviews of randomized clinical trials on alveolar ridge preservation after a tooth extraction. During March 2020, two independent reviewers performed an electronic search of the PubMed (MEDLINE), Scopus, Web of Science, and Cochrane Library databases to identify all relevant systematic reviews including randomized clinical trials on alveolar ridge preservation. A manual search of articles in renowned journals was also conducted. The methodological quality of the included reviews was determined using the AMSTAR-2 tool. From the 53 initially retrieved studies, 11 were finally included: three systematic reviews and eight systematic reviews with meta-analyses. The methodological quality of the included reviews was low or critically low. Higher quality clinical studies should be conducted prior to performing further reviews and these should meet the methodological requirements that are fundamental to this type of research.

Comparing success of immediate versus delay loading of implants in fresh sockets: a systematic review and meta-analysis

BACKGROUND AND AIMS

The replacement of teeth with osseointegrated implants is one of the significant advances in the field of restorative dentistry. The time interval between tooth extraction and the implant can be very short or long. This systematic review and meta-analysis aimed to collect and evaluate articles related to determining the effect of instant loading of dental implants are placed in the fresh socket initial stability on the clinical success of the implant compared to delay loading dental implants.

MATERIALS AND METHODS

In this study, all the available articles indexed in leading databases, including PubMed, ISI Web of Science, Embase, PsycINFO, PROSPERO, and Scopus, were searched. The full text of the articles meeting the primary criteria to be included in this research was obtained and appraised. Data of studies were extracted if they were scored as a high or moderate level of evidence.

RESULTS

A total of 2258 published articles were found through electronic database searching. After screening the titles and abstracts, and full text of articles, 16 studies met the inclusion criteria and were included in the analysis. The results of this study revealed that regarding the success rate, although there was no significant difference between immediate and delayed of dental implants, immediate procedure showed a lower incidence of bone loss in single implants.

CONCLUSION

Based on the results of this study, immediate loading of dental implant, under certain conditions, is a successful treatment process and is effective in reducing treatment time. Thus, immediate loading represents a valid alternative to the traditional delayed loading rehabilitation.

CBCT analysis of the tissue thickness at immediate implant placement with contour augmentation in the maxillary anterior zone: a 1-year prospective clinical study

Background

Immediate implant placement with simultaneous contour augmentation such as guided bone regeneration (GBR) or connective tissue grafting (CTG) has been widely performed. However, few prospective studies have evaluated both peri-implant bone and soft tissue changes between the preoperative and postoperative periods. The purpose of this study is to quantify the horizontal dimensional changes of the facial bone and soft tissue following immediate implant placement with contour augmentation.

Material and methods

Twenty patients who underwent immediate implant placement in the anterior maxilla received GBR and CTG (test group) or GBR only (control group). Cone-beam computed tomography (CBCT) scans were taken preoperatively and 1 year after the definitive prosthesis connection, and then, they were superimposed. On the CBCT images of the two stages, the horizontal distance from the implant platform to the facial bone surface (BW) and the horizontal soft tissue width (GW) were measured at the implant platform level and 2 mm apical to the implant platform level. The sum of BW and GW (=TW) was used to assess the facial mucosal contour.

Results

BW decreased significantly from preoperative to 1 year after prosthesis connection with a mean decrease of 0.47 mm (P =0.021) in the control group and a mean decrease of 0.50 mm (P = 0.019) in the test group at the implant platform level. GW increased significantly with a mean increase of 1.37 mm (P =0.005) in the test group at the implant platform level. TW decreased significantly with a mean decrease of 0.46 mm in the control group (P =0.049) but increased significantly with a mean increase of 0.87 mm in the test group (P =0.005) at the implant platform level.

Conclusions

Immediate implant placement with CTG showed a soft tissue gain of 1.37 mm compensated for bone resorption, thus still preserving the preoperative mucosal contour. CTG should be performed with immediate implant placement in cases where preoperative mucosal contours need to be maintained.

Ten Year Clinical and Aesthetic Outcomes of an Immediately Placed and Restored Implant in the Anterior Maxilla: A Case Report

The nature of immediate implant placement followed by an immediate restoration protocol makes it particularly suited to the anterior maxilla. In addition to saving treatment time and avoiding additional surgical procedures, this protocol has been reported to improve aesthetic outcomes by supporting the peri-implant tissues during the implant healing phase through the use of a provisional restoration. This case report documents the use of this protocol in a patient with a failing maxillary anterior tooth and reports on the soft and hard tissue changes over an observation period of 10 years. An implant was immediately placed after removal of a failing maxillary central incisor followed by the provision of a screw retained provisional crown on the same day. A definitive restoration was placed after a 3-month healing period. Not only did this protocol manage to maintain peri-implant bone levels over the 10-year follow-up period, excellent aesthetic outcomes and very limited soft tissue recession were observed with the use of this technique.

Application of Bovine Acellular Cancellous Bone Matrix in Alveolar Ridge Preservation Following Tooth Extraction

Objective: In this article, we explored the microscopic structure and composition of the decellular-ized cancellous bone matrix of the calf, and established the animal model of Beagle dog extraction. By applying different bone substitute materials in the extraction of teeth, we observed the new collagen-rich in the preservation of the site after tooth extraction. The protein bone matrix maintained the three-dimensional shape of the alveolar ridge compared to other biological materials. Methods: The microstructure of the new collagen-rich bone matrix was observed by scanning electron microscopy. The porous structure, porosity and distribution of collagen fibers were observed. XRD and infrared spectroscopy were used to further detect the inorganic and organic components in the new collagen-rich bone matrix. The premolar extraction and site preservation model of Beagle dogs were constructed. The changes of collagen-rich bone matrix, Bio-oss bone powder, CGF filling and blank control alveolar ridge volume were compared by CBCT. HE staining was used to observe and compare new bone formation, bone remodeling and bone resorption between groups, and to observe the formation of blood vessels, osteogenic mineralization, trabecular bone formation and inflammatory response in different periods. Results: (1) The acellular bone matrix of bovine cancellous bone completely removes the immunogenicity of the cells and has good histocompat-ibility; the pore diameter and porosity closest to the physiological structure, the main component is hydroxyapatite and collagen. (2) Site preservation can reduce the absorption of alveolar ridge following tooth extraction, preserve sufficient bone mass for alveolar fossa, and retain a good width of attachment, which provides further protection for implant surgery. (3) In the post-extraction site preservation, the CGF group has better bone composition than the BABM group and Bio-oss bone powder. Conclusion: Bovine Acellular Cancellous Bone Matrix is a new type of biological bone matrix. The main components are collagen and hydroxyapatite, which can promote bone formation in the extraction socket.

Orchestrating soft tissue integration at the transmucosal region of titanium implants

Osseointegration at the bone-implant interface and soft tissue integration (STI) at the trans-mucosal region are crucial for the long-term success of dental implants, especially in compromised patient conditions. The STI quality of conventional smooth and bio-inert titanium-based implants is inferior to that of natural tissue (i.e. teeth), and hence various surface modifications have been suggested. This review article compares and contrasts the various modification strategies (physical, chemical and biological) utilized to enhance STI of Ti implants. It also details the STI challenges associated with conventional Ti-based implants, current surface modification strategies and cutting-edge nano-engineering solutions. The topographical, biological and therapeutic advances achievable via electrochemically anodized Ti implants with TiO₂ nanotubes/nanopores are highlighted. Finally, the status and future directions of such nano-engineered implants is discussed, with emphasis on bridging the gap between research and clinical translation.

A Clinical and Histological Study about the Socket Preservation in a Patient under Oral Bisphosphonates Treatment: A Case Report

The aim of the present study is to assess the clinical and histological healing of a post-extractive alveolus following the procedure for socket preservation, in a patient receiving oral bisphosphonates for more than 6 years. After the extraction, enzymatically-deantigenated horse bone granules and an equine pericardium membrane were used to preserve the tooth socket. The patient was placed on a monthly follow-up in order to monitor the healing process. A 3 mm trephine bur was used to drill the bone for implant site preparation and to collect the bone sample. No signs and symptoms related to osteonecrosis of the jaws were reported. Histological data showed that, after 5 months, the mean percentages of trabecular bone, bone marrow and residual bone graft were respectively 45.74 ± 0.09%, 48.09 ± 0.08%, and 6.16 ± 0.01%. The residual graft material appeared to be osteointegrated and none of the particles appeared to be encapsulated. The present case report supports the guidelines that assume that patients undergoing oral bisphosphonate therapy can be eligible for surgical therapy. More clinical studies with larger sample sizes are needed to support this clinical evidence.

Aesthetic outcomes of non-functional immediately restored single post-extraction implants with and without connective tissue graft: A multicentre randomized controlled trial

OBJECTIVES

To compare the 1-year aesthetic results of flapless single implants, placed in fresh extraction sockets with bone replacement and immediate provisional restoration with or without a connective tissue graft (CTG).

MATERIAL AND METHODS

The present study proposes a partially blinded multicentre parallel randomized controlled trial, where computer-generated tables were used for central randomization to allocate treatments. A total of 59 of the 60 patients screened by eight private practices in Northern Italy fulfilled the inclusion criteria. Immediate implants were placed in a fresh extraction socket with a non-functional immediate provisional restoration with (Test group) or without (Control group) a CTG. The primary outcome variable was the implant Crown Aesthetic Index (ICAI) at the 1-year follow-up.

RESULTS

ICAI for the 59 randomized patients (Test group = 31, Control group = 28) at the 1-year follow-up was 4.69 (95% CI = 3.16-6.22) for the Test group and 3.45 (95% CI = 1.83-5.08) for the Control group, without statistically significant difference between the two groups (p = .086). One implant failure was recorded in each group, resulting in an implant survival rate of 96.8% [95% CI = 83.3-99.9] for the Test group and 96.4% [95% CI = 81.7-99.9] for the Control group. Other secondary outcome variables and complication rates were comparable across the two groups.

CONCLUSIONS

Within the limitations of the present clinical trial, the results suggested that the adjunct use of CTG is not mandatory to achieve successful aesthetic outcomes for a well-planned immediate implant placement with immediate non-functional provisional restoration in a fresh extraction socket.

Immediate implant placement in fresh extraction sockets

Immediate implant placement (IIP) in fresh extraction sockets exhibits similar survival and success rates to delayed implant placement in healed sockets. Several advantages of IIP involve shortened total treatment time, reduction of the number of invasive surgeries, and subsequent reduction of patient discomfort due to lack of additional surgeries. The major shortcomings in IIP, however, include the inability to obtain early bony support, presence of a gap between the extraction socket and fixture, and the inability to cover the fixture with soft tissue, leading to increased risk of infection and implant loss. When IIP is performed, atraumatic or minimally traumatic extractions, conservation of the septal bone in molars, minimal flap elevation or flapless surgery, bone grafting the gap between the fixture and the extraction socket, and coverage with soft tissue or a membrane must be considered.

Clinical and satisfaction outcomes of using one or two dental implants for mandibular overdentures: preliminary short-term follow-up of a randomized clinical trial

Objective

This randomized clinical trial aimed to evaluate the marginal bone loss and peri-implant aspects in patients with mandibular overdentures retained by one or two implants and assess patient satisfaction, prosthesis-related clinical outcomes, and masticatory efficiency.

Methods

Patients from the School of Dentistry of the University of Passo Fundo (UPF) with lower conventional complete dentures dissatisfied with prosthetic retention were selected. Eighteen patients were analyzed and divided into randomized treatment groups: GA, installation of one implant in the midline of the mandibular symphysis (8 patients), and GB, installation of two implants in the lower canine region (10 patients). Implant survival and prosthetic maintenance were assessed by clinical and radiographic examinations performed 6 months after implant placement and 3 months after loading. Finally, the masticatory efficiency of the prostheses was evaluated with the QoLIP-10 (Quality of Life with Implant-Prostheses) questionnaire, and the degree of patient satisfaction used the visual analog scale (VAS).

Results

Regarding the esthetic satisfaction of the patients, there was no statistical difference between the two groups studied (p = 0.680). Patients who received two implants presented easier chewing (p = 0.049) and a lower average number of prosthesis maintenance. There was no difference between the groups regarding peri-implant bone resorption 3 months after the use of prostheses.

Conclusions

The use of two dental implants showed higher masticatory ability and lower need for maintenance appointments when compared with one implant in mandibular overdentures but did not affect peri-implant aspects and patient satisfaction. The treatment using one implant was effective for the aspects evaluated, but further clinical studies are required on the subject.

Patient Satisfaction with Implant-Supported Monolithic and Partially Veneered Zirconia Restorations

The digital workflow and the application of Computer-Aided Manufacturing (CAM) to prosthodontics present the clinician with the possibility of adopting new materials that confer several advantages. Especially in the case of zirconia, these innovations have profoundly changed daily practice. This paper compares the satisfaction and perception of patients who received implant-supported single crowns (SC) and fixed partial dentures (FPD) made from zirconia, either monolithic or partially veneered, after 3 years of follow-up; the success and survival rate of these restorations were also measured. Forty patients, who had been previously treated with implant-supported SC or FPD, either monolithic or partially veneered, and submitted to a yearly maintenance program, were recalled 3 years after their treatment and requested to complete an 8-question questionnaire regarding their perceptions of the treatment. Any mechanical or biological complication that had occurred from the time of delivery was also recorded. Patients that experienced ≥1 complication were less likely to be prone to repeat the treatment. The 3-year success rate was 92.6% for monolithic restoration and 92.3% for partially veneered restoration, while the survival rate was 100% for both restorations. The 3-year follow-up found that monolithic and partially veneered zirconia restorations are both well-accepted treatment options, and patients preferred the veneered restorations (0.76, p < 0.05) from an aesthetic point of view. According to our results, monolithic and veneered zirconia restorations are both reliable treatment options and are both equally accepted by patients.

Computed Tomography for the Assessment of the Potential Risk After Implant Placement in Fresh Extraction Sites in the Posterior Mandible

Immediate implant placement (IIP) is considered a reliable procedure, with survival rates of 94.9%-98.4%. Nevertheless, in the posterior mandible, it poses a high risk of damage to anatomic structures. The aim of this study was to determine the risk of anatomic structures injury associated with IIP in the posterior mandible based on apical primary stability, respecting a safe distance from the inferior alveolar nerve and lingual plate, and to evaluate the influence of different factors on those risks. Pre-extraction cone beam computed tomography scans of 100 patients were retrospectively analyzed. Measurements were taken from tooth apices to lingual plate and to mandibular canal. Values of <4 mm of the former and <6 mm of the latter were categorized as considerable risk. Values of <2 mm at both measurements were considered high risk. Two-sided P < .05 was considered statistically significant. Mean root-to-alveolar canal distance was 7.6 ± 2.7 mm in the first molar, 6.5 ± 3mm in the second premolar, and 5.4 ± 3 mm in the second molar (P < .005). The mean distance to the outer lingual cortex was 3.9 ± 2.1 mm in the first molar and 3.2 ± 0.1 mm in the second molar. Thus, second molars were at higher risk of inferior alveolar nerve injury and lingual plate perforation during IIP. Background factors associated with higher IIP risk were female sex and age < 40 years. In the mandible, the anatomic risk posed by IIP is greatest for second molars and lowest for first molars. Several background factors affect the distances between root apices and the mandibular canal.

Efficacy of different surgical techniques for peri-implant tissue preservation in immediate implant placement: a systematic review and meta-analysis

INTRODUCTION

Preserving peri-implant tissues after immediate implant placement (IIP), especially in aesthetic zones, is a topic of interest.

OBJECTIVES

This systematic review investigated the effects of currently available surgical procedures for preserving peri-implant tissue or ensuring dimensional stability following immediate implant placement.

MATERIALS AND METHODS

The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement's guidelines were followed, and articles were sought on the PubMed and Cochrane databases with no date restrictions. Only randomised clinical trials that evaluated changes in soft and hard tissues around immediately placed implants were included. Statistical analyses were performed, and the studies´ quality was assessed using the Cochrane Collaboration tool. The agreement between reviewers was assessed based on Cohen's kappa statistics.

RESULTS

Of the 14 studies that met the inclusion criteria, 11 were analysed in the meta-analysis (kappa = 0.814; almost perfect agreement). The use of connective tissue grafts resulted in a significantly greater improvement of the facial gingival level (MD = -0.51; 95% CI: -0.76 to -0.31; p = < .001), and the placement of bone grafts significantly reduced the horizontal resorption of the buccal bone (MD = -0.59; 95% CI: -0.78 to -0.39; p < .001).

CONCLUSION

Connective tissue grafts and bone grafts positively influence tissue preservation around immediately placed implants. Neither the flapless technique nor palatal implant positioning resulted in significant improvements to any of the investigated parameters. Additional longitudinal studies are required.

CLINICAL RELEVANCE

This meta-analysis is useful for discerning the effects of soft tissue augmentation, bone grafting, the flapless technique, and palatal implant positioning on preserving peri-implant tissues after immediate implant placement.

Immediate implant placement and loading in the esthetic area when the buccal socket wall is significantly damaged

OBJECTIVES

Recent clinical recommendations contraindicate immediate implant placement when the socket buccal bone plate is significantly damaged. The connective tissue graft (CTG) is increasingly being used in implant therapy and can replace periodontal defects lacking bone wall in periodontal regenerative surgery. Therefore, CTG could be used to allow immediate implant placement and loading even when the buccal socket wall is damaged, facilitating graft material stability.

CLINICAL CONSIDERATIONS

In the first case, deep bone dehiscence was caused by a vertical root fracture. In the second case, a big bone fenestration was caused by a chronic endodontic periapical lesion. Both cases were treated with immediate implant placement and loading. A buccal CTG was used to compensate for the lack of bone and allow stabilization of the particulate xenograft in the gap between the implant and the damaged buccal socket wall. In both cases, a provisional screw-retained crown was immediately delivered, and the definitive layered zirconia crown was delivered after 3 months. Esthetic results and patient satisfaction monitored for 1 year after loading proved to be encouraging.

CONCLUSIONS

Although further investigations with longer follow-up are required, the approach is likely to yield good results after 1 year of loading.

CLINICAL SIGNIFICANCE

The purpose of this report is to show a surgical approach that seems to be able to overcome the contraindication of the quoted consensus report, which allows for good esthetic results and patient satisfaction even when the buccal bone wall of the extraction socket has been more than 50% compromised, allowing treatment time and cost reduction.

Evidence-based analysis of the effect of smoking on osseointegrated implant outcome

The outcome of the osseointegrated implant is influenced by various conditions, one of which is smoking. Literature shows conflicting results for the association between smoking and implant success. Hence, the study was conducted to assess the effects of smoking on survival and marginal bone loss of osseointegrated implants. Literature search of published articles in Medline, Scopus, Ovid, and Journal of Web till June 2020 were analyzed for the determined outcomes. Revman 5.4 software was used for the analysis of the study. Of the 437 articles screened, nine were chosen for review and analysis. Meta-analytic results showed that implant success rate was better in nonsmokers than smokers (odds ratio = 0.43, 95% confidence interval = 0.26-0.72, P < 0.0001). Smoking habit does seem to affect the implant outcome of survival and marginal bone loss negatively.

Soft tissue contour and radiographic evaluation of ridge preservation in early implant placement: A randomized controlled clinical trial

Objectives

To compare two ridge preservation techniques and spontaneous healing in terms of hard and soft tissue changes 2 months after tooth extraction.

Material and methods

The study was designed as a randomized controlled trial and included 75 patients. After single tooth extraction in the maxillary incisor/premolar area, patients were randomly allocated to one of the following groups: (a) ridge preservation with a xenogeneic bone substitute covered with a collagen matrix (CM‐group), (b) ridge preservation with a xenogeneic bone substitute covered with a free palatal graft (PG‐group) or (c) spontaneous healing (control). Eight weeks after tooth extraction, implants were placed and clinical, profilometric and radiographic evaluations were performed. In addition, the need for further guided bone regeneration (GBR) at implant placement was assessed. The differences between the treatment groups were compared with the One‐way ANOVA or Kruskal–Wallis test with the corresponding post hoc analysis. The proportions of the categorical parameters were compared with the Fisher´s exact test.

Results

Seventy‐five patients underwent early implant placement 8 weeks after tooth extraction and were evaluated. CM‐group (−0.9 SD 0.6 mm) and PG‐group (−1.0 SD 0.8 mm) showed less horizontal bone resorption compared to the control group (−3.2 SD 2.1 mm) (p < .001). Moreover, the necessity of GBR at implant placement was significantly less in CM‐group (32%) and PG‐group (24%) when compared to control group (72%) (p = .001). Patients in CM‐group experienced less pain than PG‐group, one week after tooth extraction (p = .042). No significant differences were found regarding graft evaluation, post‐operative complications, and soft tissue contour.

Conclusions

Ridge preservation using a xenogeneic bone substitute covered with a collagen matrix or a palatal graft, results in less bone resorption and fewer GBR procedures at early implant placement compared to spontaneous healing.

Treatment of Full and Partial Arches with Internal-Conical-Connection Dental Implants: Clinical Results after 5 Years of Follow-Up

The aim of the present investigation is to evaluate the implant therapy outcomes over a period of 5 years and to analyze several patient risk factors influencing the stability of the peri-implant tissues. Seventy-eight patients were consecutively treated between 2009 and 2017 and restored with implant-supported fixed prostheses. The following inclusion criteria were considered: partial or complete edentulism; residual bone volume of at least 3.3 mm in diameter and 8 mm in length; a favorable relationship between maxilla and mandible; at least a minimum 5 year follow-up for each implant included in the statistical analysis. Intraoral radiographs were taken at implant loading and every 12 months during the follow-up visits. They were subsequently stored on a personal computer and analyzed to determine the changes in bone level. Seventy-eight patients receiving 209 implants completed a minimum follow-up period of 5 years. One-hundred dental implants were inserted in the maxilla while 109 were placed in the mandible. Eleven (14.1%) out of 78 treated patients who received 29 (13.9%) dental implants were considered as drop-outs. On the whole, peri-implantitis was diagnosed in three implants. The average final pocket probing depth at implant level was 2.5 ± 1.2 mm. The average final bone loss after 5 years was 0.3 ± 0.4 mm, both at the mesial and distal aspect of the implant. The effects of the prosthesis type, sex and implant site did not statistically influence the marginal bone loss; on the contrary, a statistically significant difference regarding marginal bone loss was detected between smoker and non-smoker patients (p = 0.021). Implants with internal-conical abutment connection showed stable peri-implant bone levels at the medium-term follow-up. Nevertheless, further prospective long-term clinical studies are necessary to confirm these data.

Immediate implant placement in molar extraction sockets: a systematic review and meta-analysis

Background

Immediate implants are frequently employed in the anterior maxillary area. However, the installation of dental implants simultaneously with tooth extraction can also provide with benefits in the posterior areas with a reduction in time prior the recovery of the masticatory function. Results previously reported in the literature show high-survival and success rates for implants placed in extraction sockets in molar areas; however, this topic has received limited systematic analysis.

Material and methods

Electronic and manual literature searches were performed by two independent reviewers in several data-bases, including MEDLINE, EMBASE, and Cochrane Oral Health Group Trials Register, for articles up to January 2019 reporting outcomes of immediate implants placed in molar areas. Primary outcomes included survival and success rates, as well as marginal bone loss. Secondary outcomes included the influence of implant position, type of implant connection, grafting protocol, flap or flapless approach, implant diameter, surgical phase, presence of buccal plate, and loading protocol.

Results

Twenty studies provided information on the survival rate, with a total sample of 1.106 implants. The weighted mean survival rate of immediate implants after 1 year of follow-up was 96.6%, and the success rate was 93.3%. On the other hand, marginal bone loss was 1.29 ± 0.24 mm. Secondary outcomes demonstrated that grafting the gap and the loading protocol have an effect on survival and success rates. Similarly, the presence or absence of the buccal bone affect crestal bone levels. Meta-analysis of 4 investigations showed a weighted mean difference of 0.31 mm ± 0.8 IC 95% (0.15–0.46) more marginal bone loss at immediate implant placement versus implants in healed sites (p < 0.001) I² = 15.2%.

Conclusion

In selected scenarios, immediate implant placement in molar extraction socket might be considered a predictable technique as demonstrated by a high survival and success rates, with minimal marginal bone loss.

Volumetric changes in alveolar ridge preservation with a compromised buccal wall: a systematic review and meta-analysis

Background

Many studies have addressed socket preservation, though fewer publications considering buccal wall loss can be found, since the literature typically considers sockets with four walls. A systematic review was made on the influence of type II buccal bone defects, according to Elian’s Classification, in socket grafting materials upon volumetric changes in width and height.

Material and Methods

An electronic and manual literature search was conducted in accordance to PRISMA statement. The search strategy was restricted to randomized controlled trials (RCTs) and controlled clinical trials (CCTs) describing post-extraction sockets with loss of buccal wall in which alveolar ridge preservation (ARP) was carried out in the test group and spontaneous healing of the socket (SH) was considered in the control group.

Results

The search strategy yielded 7 studies. The meta-analysis showed an additional bone loss of 2.37 mm in width (p > 0.001) and of 1.10 mm in height (p > 0.001) in the absence of ARP. The reconstruction of the vestibular wall was not evaluated in any study. The results also showed moderate to great heterogeneity among the included studies in terms of the changes in width and height.

Conclusions

Despite the heterogeneity of the included studies, the results indicate a benefit of ARP versus SH. Further studies are needed to determine the volumetric changes that occur when performing ARP in the presence of a buccal bone wall defect.

Key words:Alveolar ridge preservation, buccal wall defect, volumetric changes, bone loss, meta-analysis.

Effect of Different Implant Designs on Strain and Stress Distribution under Non-Axial Loading: A Three-Dimensional Finite Element Analysis

Implant design evolved alongside the development of implant therapy. The purpose of this finite element analysis (FEA) study was to analyze the influence of different implant designs on the stress and strain distribution to the implants and surrounding bone. Three implant designs with the same length and diameter were used. The three-dimensional geometry of the bone was simulated with a cortical bone of three different thicknesses and two medullar bone densities: low density (150 Hounsfield units) and high density (850 Hounsfield units). A 30° oblique load of 150 N was applied to the implant restoration. Displacement and stress (von Mises) results were obtained for bone and dental implants. The strain and stress distributions to the bone were higher for the tissue-level implant for all types of bone. The maximum principal strain and stress decreased with an increase in cortical bone thickness for both cancellous bone densities. The distribution of the load was concentrated at the coronal portion of the bone and implants. All implants showed a good distribution of forces for non-axial loads, with higher forces concentrated at the crestal region of the bone–implant interface. Decrease in medullar bone density negatively affects the strain and stress produced by the implants.

Alveolar ridge preservation and primary stability as influencing factors on the transfer accuracy of static guided implant placement: a prospective clinical trial

Background

The aim of this prospective clinical study was to investigate differences between virtually planned and clinically achieved implant positions in completely template-guided implant placements as a function of the tooth area, the use of alveolar ridge preservation, the implant length and diameter, and the primary implant stability.

Methods

The accuracy of 48 implants was analyzed. The implants were placed in a completely template-guided manner. The data of the planned implant positions were superimposed on the actual clinical implant positions, followed by measurements of the 3D deviations in terms of the coronal (dc) and apical distance (da), height (h), angulation (ang), and statistical analysis.

Results

The mean dc was 0.7 mm (SD: 0.3), the mean da was 1.4 mm (SD: 0.6), the mean h was 0.3 mm (SD: 0.3), and the mean ang was 4.1° (SD: 2.1). The tooth area and the use of alveolar ridge preservation had no significant effect on the results in terms of the implant positions. The implant length had a significant influence on da (p = 0.02). The implant diameter had a significant influence on ang (p = 0.04), and the primary stability had a significant influence on h (p = 0.02).

Conclusion

Template-guided implant placement offers a high degree of accuracy independent of the tooth area, the use of measures for alveolar ridge preservation or the implant configuration.

A clinical benefit is therefore present, especially from a prosthetic point of view.

Trial registration

German Clinical Trial Register and the International Clinical Trials Registry Platform of the WHO: DRKS00005978; date of registration: 11/09/2015.

Evaluation of efficacy of platelet-rich fibrin membrane and bone graft in coverage of immediate dental implant in esthetic zone: An in vivo study

Objective:

This study compared and evaluated the clinical and radiographic results of guided bone regeneration using platelet-rich fibrin (PRF) and collagen membrane as barrier membrane in immediately placed implants with severe buccal bone defect (with respect to marginal bone level, implant stability quotient [ISQ]), and histological analysis of new bone formation.

Materials and Methods:

Sixteen implants were placed in patients requiring immediate implant placement and having a buccal wall defect and randomly divided into two groups one receiving PRF membranes and other collagen membrane. The sites were grafted with bone-substitute material in both the groups. After 4 months, at the time of second-stage surgery, implant stability is measured by Osstell Mentor, crestal bone level on mesial and distal sides of implant by digital intraoral periapical, buccal defect clinically by probe and histological analysis of biopsied bone.

Results:

The results were insignificant and comparable in both the groups when comparison was made between the groups. The mean buccal defect, mean values of average ISQ, crestal bone level in both the groups at baseline and after 4 months were compared. No significant difference between both the groups was found after 4 months. Bone quality seemed to be equal in both groups after histological analysis. Within the limits of the study, both the groups had shown similar results in all criteria.

Conclusion:

Within the limitation of the study, it can be concluded that both the treatment modalities are successful in terms of buccal defect reduction, stability, and increase in crestal bone level.

Functional oral health-related quality of life impact: A systematic review in populations with tooth loss

Patients perceive the impact of oral disorder in four major areas, the dimensions of oral health-related quality life (OHRQoL) Oral Function, Orofacial Pain, Orofacial Appearance, and Psychosocial Impact. The functional aspect is essential given the need of chewing, biting, speech and swallowing. The objective of this study was to identify OHRQoL information for dental subjects with functional oral health problems. In a systematic review, distinct and clinically relevant groups of dental subject samples, in this study called "population groups," with such functional OHRQoL information based on the Oral Health Impact Profile (OHIP) were identified (PROSPERO registration: CRD42017064033). The search strategy was "Oral Health Impact Profile" or OHIP. Searches were conducted in the PubMed interface of the Medline database, EMBASE, Cochrane, CINAHL and PsyINFO on 8 June 2017 and updated on 14 January 2019. Published OHIP domain data of different versions were recalculated into OHIP-14`s Physical Disability domain score, characterising the subject's Oral Function impact. 3,653 potentially abstracts were screened. We identified 78 publications reporting dimensional information on 154 subject samples with 52 populations. A typical mean functional impact for partially dentate subjects was 1.6 units on a 0 to 8 unit metric, while for edentate subjects, the mean functional impact was 2.6 units. The functional impact score ranged from 0 to 7.9 units with 50% of the patient samples located between 0.8 and 2.6 units. For the first time, we provide normalised and therefore comparable metric information about the functional OHRQoL impact for a substantial number of functional oral conditions.

Relevant Design Aspects to Improve the Stability of Titanium Dental Implants

Post-extractional implants and immediate loading protocols are becoming much more frequent in everyday clinical practice. Given the existing literature about tapered implants, the objective of this paper was to understand whether implant shape had a direct influence on the results of the insertion torque (IT) and implant stability quotient (ISQ). Seven tapered implant prototypes were developed and distributed into three groups and compared with a control cylindrical implant-VEGA by Klockner Implant System. The implants were inserted into bovine bone type III according to Lekholm and Zarb Classification. The sample size was n = 30 for the three groups. Final IT was measured with a torquemeter, and the ISQ was measured with Penguin Resonance Frequency Analysis (RFA). Modifications done to the Prototype I did not reveal higher values of the ISQ and IT when compared to VEGA. In the second group, when comparing the five prototypes (II-VI) with VEGA, it was seen that the values of the ISQ and IT were not always higher, but there were two values of the ISQ that were statistically significantly higher with the 4.0 mm diameter Prototypes II (76.3 ± 6.1) and IV (78 ± 3.7). Prototype VII was the one with higher and significant values of the ISQ and IT. In both diameters and in both variables, all differences were statistically significant enough to achieve the higher values of primary stability values (IT and ISQ). Given the limitations of this study, it can be concluded that when there is an increase of the diameter of the implant and body taper, there is an increase of the ISQ and IT, showing that the diameter of the implant is an important criteria to obtain higher values of primary stability.

Immediate Implant Placement in Infected Sockets: A Consecutive Cohort Study

Introduction: Immediate placement of implants in a fresh post-extraction socket is an increasingly popular and established treatment option. However, active infection in the extraction site may adversely affect the outcome of this procedure. This study was designed to assess the clinical results of immediate placement of dental implants in infected extraction sockets using a standardized protocol, which included (a) the use of an Er,Cr:YSGG laser for the decontamination of the infected socket prior to implant insertion, and (b) the utilization of an in situ hardening alloplastic bone graft substitute to augment the gap between the implant surface and the labial plate of bone. Patients and Methods: A retrospective record review was used to identify 68 patients who had implants placed as per the described protocol. A total of 126 implants were placed in 68 patients (65 implants in the maxilla, 61 implants in the mandible). The implants were loaded 136 ± 73 days (mean ± standard deviation; range: 37–400 days) after implant placement. Eight patients (16 implants) were subsequently lost to follow up. Results: 105 of the 110 implants (95.45%) placed immediately in the infected sites using the described protocol survived after prosthetic loading. Conclusion: Immediate implant placement in previously infected sites using the protocols mentioned in our study with laser decontamination of the socket, grafting with an in situ hardening alloplastic bone graft material and non-submerged healing shows a similar survival rate to the published success rates for immediate implants placed in non-infected sites.

Immediate implant placement and provisionalization: Aesthetic outcome 1 year after implant placement. A prospective clinical multicenter study

BACKGROUND

Prospective aesthetic outcomes on a high number of patients after immediate implant placement and provisionalization (IIPP) are lacking.

PURPOSE

To analyze the aesthetic outcome after IIPP.

MATERIALS AND METHODS

One hundred consecutive patients with a failing maxillary incisor were provided with an immediately placed and provisionalized nonloaded implant using a flapless procedure and palatal implant positioning. The remaining gap buccally was filled with a bone substitute. Preoperatively (T0), 2 weeks postoperatively (T1), direct after placement of the permanent crown (T2), and 1 year after IIPP (T3), standardized light photographs were made. Change in aesthetic score was the primary outcome measure. Both the white aesthetic score (WES) and pink aesthetic score (PES) were used.

RESULTS

In the first year postsurgery, the mean total-WES and total-PES scores raised from 4.5 to 8.2, and from 9.9 to 12.1, respectively. The mean PES scores for mesial and distal papilla, soft tissue marginal level, contour, color, and texture, raised significantly (P < .05), while the alveolar process contour, on average, remained stable from T0 to T3.

CONCLUSIONS

Within the limitations of this 1-year research, it may be concluded that, following this minimal invasive IIPP procedure, a high aesthetic outcome was achieved.

A 22-Year Follow Up of Immediate Implant Placement without Bone Augmentation: A Case Series Study

PURPOSE

To retrospectively evaluate the treatment outcome of immediate implants placed in fresh extraction sockets without bone augmentation after 22 years of function.

MATERIALS AND METHODS

The study group received implant therapy in 1997, including surgical placement and prosthodontic rehabilitation. The mean age of the subjects at the time of implant placement was 40 ± 5.54 years. A total of 35 subjects received 36 implants in fresh extraction sockets without bone augmentation. Definitive prostheses were placed 4 to 6 months after implant placement. Implant treatment outcomes were evaluated using clinical and radiographic parameters obtained during follow-up visits at 1, 5, 10, 15, 20, and 22 years after prosthetic loading.

RESULTS

Among the 35 treated subjects, five patients moved out of the country and could not be evaluated at the follow-up times. A total of 29 subjects were included in the study with a drop-out rate of 14.1%. Of these, one patient lost the implant during the osseointegration period before prosthodontic treatment. No other implant failure or complication during the rest of the follow-up period was reported, thus giving a cumulative survival rate of 97.2% during the 22-year follow-up. The change in marginal bone level was less than 2 mm in most subjects at the 22-year examination. The mean bone loss from baseline to 22-year follow-up was 1.61 mm, and the mean bone level at the 22-year follow-up examination was situated at 2.13 ± 0.023 mm from the implant platform, which was used as the reference point.

CONCLUSIONS

Immediate implant placement in extraction sockets exhibits excellent prognosis even when bone augmentation is not performed.

Prophylactic antibiotics for staged bone augmentation in implant dentistry

Background: The objective of the study was to assess the effect of prophylactic antibiotics on the outcome of bone augmentation and subsequent dental implant placement by combining the recommended quality assessment methods for systematic reviews and primary studies.Materials and methods: This is a complex systematic review in which systematic reviews as well as primary studies are scrutinised. A search of Medline (OVID), The Cochrane Library (Wiley) and EMBASE, PubMed and Health technology assessment (HTA) organisations as-well as a complementary hand-search was carried out. Selected primary studies were assessed using GRADE. Each study was reviewed by three authors independently.Results: Abstract screening yielded six potential systematic reviews allocated for full-text inspection. A total of ten primary studies were read in full-text. No relevant systematic reviews regarding the topic of this article were found. The quality assessment resulted in two primary studies with a moderate risk of bias. Of the two studies with a moderate risk of bias, one compared a single dose of clindamycin 600 mg preoperatively with the same preoperative dose followed by four doses of 300 mg every 6 h. The second study compared a single dose prophylaxis of two different types of antibiotic compounds.Conclusion: In conclusion, the scientific evidence regarding the use of antibiotic prophylaxis for reducing the risk of infection in conjunction with bone augmentation procedures during dental implant placement is very limited. The infection rate as compared to nonusage of prophylactic antibiotics, selection of the most suitable compound, and the optimal duration of prophylactic treatment is still unknown.

Canalis Sinuosus Damage after Immediate Dental Implant Placement in the Esthetic Zone

Dental implant failure in the anterior maxilla can be caused by the range of the features. One of them is neighboring neurovascular structure damage, such as the canalis sinuosus (CS), that carries the superior anterior alveolar nerve. The aim of the report is to demonstrate clinical symptomatology and radiographic signs of CS damage in a 45-year-old female patient who underwent upper left lateral incisor extraction and immediate implant placement and implant removal in 16 days secondary to pain and paresthesia in the maxillary left region.

The effectiveness of immediate implant placement for single tooth replacement compared to delayed implant placement: A systematic review and meta-analysis

AIM

To compare immediate implant placement (IIP) to delayed single implant placement (DIP, ≥3 months post-extraction) in terms of implant survival (primary outcome), surgical, clinical, aesthetic, radiographic and patient-reported outcomes (secondary outcomes).

MATERIALS AND METHODS

Two reviewers independently performed an electronic search in PubMed, Web of Science, EMBASE and Cochrane and a hand search to identify eligible studies up to May 2018. Only randomized controlled trials (RCTs) and non-randomized controlled studies (NRSs) comparing IIP to DIP with at least 1 year of follow-up were selected for a qualitative analysis and meta-analysis.

RESULTS

The search identified 3 RCTs and 5 NRSs out of 2,589 titles providing data on 473 single implants (IIP: 233, DIP: 240) that had been in function between 12 and 96 months. One RCT showed unclear risk of bias, whereas all other studies demonstrated high risk. Meta-analysis showed significantly lower implant survival for IIP (94.9%) as compared to DIP (98.9%) (RR 0.96, 95% CI [0.93; 0.99], p = 0.02). All were early implant failures. A subgroup meta-analysis demonstrated a trend towards lower implant survival for IIP when postoperative antibiotics had not been administered (RR: 0.93, 95% CI [0.86; 1.00], p = 0.07). This was not observed among studies including the administration of postoperative antibiotics (RR: 0.98, 95% CI [0.94; 1.02], p = 0.35). Meta-analyses showed similar probing depth (WMD 0.43 mm, 95% CI [-0.47; 1.33], p = 0.35) and aesthetic outcomes as assessed by the pink aesthetic score (standardized WMD -0.03, 95% CI [-0.46; 0.39], p = 0.88) for IIP and DIP. Data on marginal bone loss were conflicting and highly biased. Soft tissue recession was underreported and available data were highly biased. Patient-reported outcomes were underreported, yet both IIP and DIP seemed well tolerated.

CONCLUSION

Immediate implant placement demonstrated higher risk for early implant loss than DIP. There is a need for RCTs comparing IIP to DIP with CBCT analyses at different time points and data on midfacial recession with the preoperative status as baseline. In these studies, the need for hard and soft tissue grafting should also be evaluated.

[Clinical evaluation of the socket-shield technique for immediate implantation in the maxillary anterior region]

OBJECTIVE

This study aimed to evaluate the clinical effect of the socket-shield technique in the maxillary anterior region at one year after implant placement.

METHODS

Ten patients with maxillary anterior teeth that cannot be reserved were enrolled. Implants were installed following the socket-shield technique and restored six months after the surgery. The thickness of the labial maxillary bone of the implant was compared before and one year after the surgery. At one year follow-up, the reten-tion rate of the implants, Jemt classification, and pink and white aesthetic scores were evaluated. Postoperative complications and patient satisfaction were also analyzed.

RESULTS

One year after installation, the retention rate of the implant was 100%. The thickness of the maxillary bone at the neck, central, and root section of the implant reduced to (0.27±0.21), (0.19±0.20), and (0.28±0.29) mm, respectively, compared with the values immediately after the operation. The thickness of the labial maxillary bone at the three measurement points immediately after and one year after the operation was statistically significant (P<0.05). No significant difference (P>0.05) of the difference thickness between immediate and one year after operation at the three measurement points. The pink esthetic scores of the implant prosthesis was 9.10±0.54, and the white esthetic scores was 9.00±0.63. No complications were observed, and the patients had a high degree of satisfaction.

CONCLUSIONS

The socket-shield technique could provide acceptable treatment results but cannot completely avoid the reconstruction of the labial maxillary bone of the implants. The technique exhibits favo-rable short-term aesthetic result, but its long-term clinical effect and aesthetic problems need to be further studied.

Evaluation of biologic implant success parameters in type 2 diabetic glycemic control patients versus health patients: A meta-analysis

AIM

The aim of the present systematic literature review was to evaluate bleeding on probing (BOP), pocket depth (PD), and marginal bone loss (MBL) in type 2 diabetes mellitus (T2DM) control patients.

METHODS

An electronic literature search was conducted through PubMed, Web of Science, Cochrane, Embase, and ScienceDirect. The search included prospective human clinical studies that analyzed the success of dental implants in T2DM control patients. For inclusion, studies should have had a minimum of 1-year follow up and should have assessed the following parameters: MBL, BOP and PD. Prior to meta-analysis, all of the studies were assessed for quality, bias, and heterogeneity.

RESULTS

Risk of bias analysis indicated that all studies were of moderate quality. After a full-text evaluation, only seven studies met the inclusion criteria for this meta-analysis, with a combined total of 443 patients and 530 dental implants. The meta-analysis indicated a statistically significant difference between parameters of implants placed in the glycemic-controlled group and healthy group in MBL (P < .001), BOP (P < .04), and PD (P < .001).

CONCLUSION

The results of the present study indicated that, despite being glycemic controlled, patients with T2DM were associated with a higher risk of peri-implant disease.

Evaluation of crestal bone resorption around cylindrical and conical implants following 6 months of loading: A randomized clinical trial

OBJECTIVE

The purpose of this clinical study was to evaluate the effect of implant body form (cylindrical and conical implants) on crestal bone levels during 6 months' follow-up after loading.

MATERIALS AND METHODS

A total of 32 SPI implants (19 conical implants/13 cylindrical implants) were randomly placed in 12 male patients using a submerged approach. None of the patients had compromising medical conditions or parafunctional habits. Periapical radiographs using the parallel technique were taken after clinical loading and 6 months later. Clinical indices including pocket depth and bleeding on probing (BOP) were recorded on 6-month follow-up. Data were analyzed by independent samples t-test and Chi-square test with a significance level of 0.05.

RESULTS

Six months after loading, crestal bone loss was 0.84 (±0.29) mm around the cylindrical implants and 0.73 (±0.62) mm around the conical types, which was not significantly different (P = 0.54). Pocket depth around the cylindrical and conical implants was 2.61 (±0.45) mm and 2.36 (±0.44) mm, respectively (P = 0.13). BOP was observed among 53.8% and 47.4% of the cylindrical implants and conical (P = 0.13). Bone loss and pocket depth in the maxilla and mandible had no significant difference (P = 0.46 and P = 0.09, respectively).

CONCLUSION

In this study, although bone loss and clinical parameters were slightly higher in the cylindrical implants, there was no significant difference between the conical- and cylindrical-shaped implants.

Risks of angled implant placement on posterior mandible buccal/lingual plated perforation: A virtual immediate implant placement study using CBCT

Background/purpose

Immediate implant placement has been considered to be a successful treatment procedure. The bone plate perforation (BPP) may be one of severe complication and potentially life-threatening situation. The aim of this virtual study is to evaluate the influences of angled implant insertion on BPP during immediate implant installation in the posterior mandible.

Materials and methods

Cone beam computed tomography images of 488 posterior teeth from 61 patients were selected. Virtual immediate implant placement (VIIP) was performed at each posterior tooth following the appropriate axis with the prosthetic-driven planning and different deviation angles of 3-, 6-, or 9-degree. BPP was then examined from cross-sectional images obtained. Furthermore, the relation of lingual bony morphology and BPP were also determined.

Results

The incidence of buccal and lingual BPP increased as the deviation angle increased in posterior mandible area. Incidence of lingual BPP was significantly influenced by angular deviation and type of lingual bony morphology after adjusting for age, gender, tooth type, and right/left side. An increase in incidence odds of over 6-fold (OR = 6.583) was noted for placements angled by 9° compared with placements made without angulation, and an increase in incidence odds of over 3-fold (OR = 3.622) was noted for teeth with the undercut-type lingual morphology compared with the other types.

Conclusion

The present Results indicate that accurate selection of the implant insertion angle and full awareness of the bony anatomy at the implant recipient site are essential to prevent BPP in the posterior mandible.

Dimensional changes of buccal bone plate in immediate implants inserted through open flap, open flap and bone grafting and flapless techniques: A cone-beam computed tomography randomized controlled clinical trial

OBJECTIVES

To assess through cone-beam computed tomography (CBCT) buccal alveolar bone alterations after immediate implant placement using the following techniques: open flap and grafting (flap-graft), open flap and no grafting (flap-nograft) and flapless and no grafting (noflap-nograft).

MATERIALS AND METHODS

This was a three-armed parallel group randomized clinical trial with allocation ratio 1:1:1. Patients were eligible in case they needed immediate implant replacing teeth in maxillary premolar area, with sufficient buccal bone support. CBCT was performed immediately after the intervention and 6 months later. The main outcomes were CBCT measurements performed at apical (A-EA), medial (M-EM) and external and internal implant bevel level (B-EB, B-IB) and vertical defect depth (DP). Pain and discomfort, time of surgery and complications were recorded. Differences between groups were estimated through ANOVA tests and post-hoc Scheffe's analysis for pairwise comparisons. Multiple regressions were conducted to estimate influence of gingival biotype and baseline marginal gap dimension.

RESULTS

Forty-five patients were recruited and randomized to treatments with one lost to follow-up. Analysis of variance showed that the effect of treatment technique was not relevant for all horizontal and vertical outcomes. The three techniques exhibited almost complete fill of marginal gap, with a mean residual vertical gap of 0.27 mm and horizontal gap of 0.5 mm. Regression models indicated a positive effect of thick biotype on gap filling and dimensional bone reduction. The noflap-nograft technique resulted less painful.

CONCLUSIONS

The option of noflap-nograft surgery in post-extraction implants allows for minimal surgical intervention with comparable buccal bone changes and gap filling after a follow-up of 6 months in sites with sufficient buccal bone support.

Dental Implant Outcomes in Grafted Sockets: a Systematic Review and Meta-Analysis

Objectives

To assess the treatment outcomes of the dental implants placed in the grafted sockets.

Material and Methods

A search protocol was developed to evaluate the treatment outcomes of dental implants placed in the grafted sockets in terms of implant survival rates (primary outcome), marginal-bone-level (MBL) changes, clinical parameters (i.e., bleeding on probing, probing depth), occurrence of peri-implant diseases, and aesthetic outcomes (secondary outcomes). Randomized controlled clinical trials (RCTs), controlled clinical trials, and prospective studies with at least 12 months of follow-up and a minimum of 10 patients having at least one dental implant inserted into the grafted socket were conducted. MEDLINE (PubMed) was searched for relevant articles published until 1st April 2019. A meta-analysis was performed using the random-effects model on the selected qualifying articles.

Results

The present analysis included 7 RCTs. The survival rate of the implants inserted into the grafted sockets ranged from 95 to 100% after 1 to 4 years of follow-up. MBL loss was found to be significantly greater for the implants placed in the non-grafted healed sites than for those placed in the previously grafted sockets (weighted mean difference = -1.961 mm, P < 0.0001). In terms of MBL changes, no difference was detected between immediately inserted implants versus implants placed in previously grafted sockets. None of the included studies reported on the clinical parameters or occurrence of peri-implant diseases

Conclusions

Implants inserted into the previously grafted sockets showed high survival rates and lower marginal-bone-level loss than the implants inserted into the non-grafted sites.