Guided implant surgery risks and their prevention

Case report: Fabrication of a dental implant guide based on tetrahedron positioning technology

BACKGROUND

Conventional static computer-assisted implant surgery (s-CAIS) requires special equipment, such as 3D printers or computer numerical control (CNC) lathes. We present a low-cost workflow for manufacturing dental implant guides based on tetrahedron positioning technology (TPT). The aim of this case report was to use a surgical guide technique for dental implant placement using tetrahedron positioning technology.

CASE PRESENTATION

A 28-year-old man consulted for the treatment of a missing right first mandibular molar by implant placement. The cone-beam computed tomography (CBCT) data were imported into medical image processing software for analysis, and the implant design was simulated. The implant design on CBCT was transferred to the mandibular model using TPT, and the implant surgical guide was made to guide the dental implant operation. CBCT was performed postoperatively and compared with the preoperative design to check the accuracy. The central deviation of the implant head was 0.31 mm, the central deviation of the implant apex was 0.93 mm, and the implant angular deviation was 2.45°.

CONCLUSION

The use of tetrahedral positioning technology based on CBCT data is a new method for making implant guides. It is a promising technique offering a highly predictable outcome and lower risk of iatrogenic damage. However, these results should be interpreted with care since they are based on limited evidence from a case report. Larger population studies with longer follow-up periods and standardized experimental studies are required.

Multivariate analysis of causal factors influencing accuracy of guided implant surgery for partial edentulism: a retrospective clinical study

Abstract

Background

In dental implant treatment, the placement position of the implant body is important. The hypothesis is that there are factors that have a greater impact than the factors that have been studied so far.

Material and Methods

The deviation between planned and actually placed implants was measured three-dimensionally by modified treatment evaluation method in 110 patients who underwent implant placement with guided surgery for partial edentulism. Ten factors that seemed to affect errors in placement were selected: the type of tooth, type of edentulism, distance from the remaining teeth, the type of implant, implant length, number of implants, method of guidance, the number of teeth supporting the surgical guide, number of anchor pins, and presence or absence of a reinforcement structure. The effect of each factor that corrected each confounding was calculated using multivariate analysis.

Results

In this study, 188 implant bodies were set to target, and the errors measurement data of the implant position were as follows: average Angle, 2.5 ± 1.6° (95% CI 2.25–2.69); Base, 0.67 ± 0.37 mm (95% CI 0.62–0.72); and Apex, 0.92 ± 0.47 mm (95% CI 0.86–0.98). As the result of multivariate analysis, larger errors were present in the partially guided group than the fully guided group. The number of teeth supporting the surgical guide significantly influenced the error in placement position. The error caused by the number of anchor pins was significantly different for the Angle. Similarly, the presence of the reinforcement structure influenced the error significantly for the Angle.

Conclusions

It was suggested that the smaller errors could be present by performing guided surgery with full guidance and devising the design of the guide such as the number of teeth supporting the surgical guide, the setting of the anchor pin, and the reinforcement structure.

Analog-digital hybrid impression technique in an elderly patient: A case report

The hybrid impression technique consists of an initial alginate impression that provides a preoperative cast upon which a diagnostic wax-up and a silicone index are made. The wax-up is digitized; thus, the final altered digital impression is limited to absolute minimum time, effort and ensures comfort for the patient.

Bone Temperature Variation Using a 3D-Printed Surgical Guide with Internal Irrigation

Bone overheating is a possible cause of implants early failure. When a surgical guide is used, the risk of heat injury is greater due to the reduced efficacy of the irrigation. The aim of this ex vivo study was to evaluate the effect of an additional built-in irrigation on bone temperature variation during implant osteotomy. Twelve bovine ribs were used. Cone beam computerized tomography (CBCT) was performed and a 3D-printed surgical guide with additional built-in irrigation tubes was produced for each rib. A total of 48 osteotomies were prepared, to compare the supplementary internal irrigation system (Group A) with external irrigation alone (Group B), no irrigation (Group C) and with free-hand surgery with external irrigation (Group D). Temperature was measured by three thermocouples placed at depths of 1.5, 7, and 12 mm. The largest temperature variation at each thermocouple showed median values of 3.0 °C, 1.9 °C, and 2.3 °C in Group 1; 2.3 °C, 1.7 °C, and 0.9 °C in Group 2; 3.2 °C, 1.6 °C, and 2.0 °C in Group 3; 2.0 °C, 2.0 °C, and 1.3 °C in Group 4, respectively. No differences were found among the four groups. In general, the highest temperature increase was observed with the use of the first drill (cortical perforator). Post-experimental CBCT revealed the presence of radiopaque material clogging the aperture of the internal irrigation channels. Additional internal irrigation was not found to significantly contribute to decrease bone temperature in this ex vivo setting.

Analysis of Digital Workflow in Implantology

Digital workflow is increasingly accessible in daily dental practice. It has several benefits in implantology, such as the possibility of precise planning, which results in faster and safer surgery and, consequently, reduced prosthetic complications. There are also disadvantages that must be taken into consideration for successful treatment, such as deviations between the planned and placed implant position and intraoral scanning inaccuracies. We report a clinical case in implantology in which digital workflow was used throughout the process, pointing out its facilities and complications in the daily practice of dental surgeons. The patient had grade II mobility and external root resorption of tooth 11. After virtual planning, a surgical guide was fabricated by a CAD/CAM system, with immediate placement of a dental implant using the guided surgery technique. At the end of the osseointegration period, intraoral scanning was performed for fabrication of the final prosthesis also by a CAD/CAM system. After placement, the patient approved the aesthetic and functional results of the implant. We observed advantages such as simplification of clinical steps and safety of the proposed planning, but there were also disadvantages such as the complexity of digital tools, deviations of the placed implant, and inaccuracy in color selection. It was concluded that digital workflow is a reality that can be integrated into daily dental practice, resulting in greater safety, predictability of results, and ease of use in all clinical stages. However, it should be noted that there are still inaccuracies in digital tools and that a steep learning curve is needed in this area, which, if neglected, may lead to unsatisfactory results.

The Modern and Digital Transformation of Oral Health Care: A Mini Review

Dentistry is a part of the field of medicine which is advocated in this digital revolution. The increasing trend in dentistry digitalization has led to the advancement in computer-derived data processing and manufacturing. This progress has been exponentially supported by the Internet of medical things (IoMT), big data and analytical algorithm, internet and communication technologies (ICT) including digital social media, augmented and virtual reality (AR and VR), and artificial intelligence (AI). The interplay between these sophisticated digital aspects has dramatically changed the healthcare and biomedical sectors, especially for dentistry. This myriad of applications of technologies will not only be able to streamline oral health care, facilitate workflow, increase oral health at a fraction of the current conventional cost, relieve dentist and dental auxiliary staff from routine and laborious tasks, but also ignite participatory in personalized oral health care. This narrative article review highlights recent dentistry digitalization encompassing technological advancement, limitations, challenges, and conceptual theoretical modern approaches in oral health prevention and care, particularly in ensuring the quality, efficiency, and strategic dental care in the modern era of dentistry.

Using a Preoperative Scan Digital Impression and a Digital Index to Build Immediate Interim Full-Arch Implant-Supported Prosthesis. A Case Report and Proof of Concept

The transfer of information such esthetics and occlusion from the preoperative to the postoperative digital impression could reduce the time needed to build an immediately loaded full-arch not-guided rehabilitation and improve the quality of the immediate interim restoration. Based on the digital technology advances of the last years, the purpose of the present clinical report is to describe a novel digital workflow based on computer-aided design and computer-aided manufacturing aimed at fabricating an interim fixed full-arch restoration. The protocol entails recording preoperative information such as esthetics, the occlusal plane and the intermaxillary relationship in implant-supported complete rehabilitations before the surgical insertion of the fixtures. Then, the information is transferred to the postoperative impression using a digital index in the lower jaw and the palatal rugae in the upper jaw. Within the inherent limitations of a case report, the workflow was accurate, predictable, without errors from conventional protocols and was apparently characterized by low biological costs.

Digital vs. Freehand Anterior Single-Tooth Implant Restoration

Replacing a single tooth in the anterior maxilla is one of the greatest challenges in dentistry. Both functional and aesthetic results are to be strictly pursued. Planning and executing such a case through a totally digital methodology eventually guarantee many advantages, above all patient's operative and postoperative comfort. To ascertain this, a BOP analysis was performed which allowed us to evaluate soft tissues health, and more; crestal bone resorption was measured to evaluate hard tissues stability. This assumption was studied through four cases in which patients were alternatively treated with analogic and digital techniques. Four homogeneous patients were recruited. They all needed to extract one of the upper incisors, due to different clinical reasons, and then to replace it with an implant. Each patient was treated with an immediate postextractive implant which was immediately loaded, and finally, analogical and digital techniques were compared. All patients underwent a preoperative CBCT examination. After surgery, patients were checked by the surgeon after 10 days and one month to evaluate the progress of healing and to exclude any prosthetic problem. At 6 months (T1), one year (T2), and three years (T3), intraoral x-rays were performed using customized centring devices, according to the parallel beam technique. All data have been collected in a table and statistically processed; mean and standard deviation were measured. All patients entered an oral hygiene program with six months recall. Dental hygienist checked the BOP at T1, T2, and T3. At every step, similar levels of BOP were recorded. About interproximal bone loss, all patients showed an initial moderate loss (between T1 and T2), followed by stable values between T2 and T3. Despite the important limitations of a study with few cases, these results show a similar outcome comparing digital and analogical methods.

Guided Lateral Sinus Lift Procedure Using 3-Dimensionally Printed Templates for a Safe Surgical Approach: A Proof-of-Concept Case Report

The purpose of this article was to present a guided lateral window sinus lift procedure with the aid of a fully digital workflow using surgical templates for window osteotomy preparation and implant placement. A 22-year-old patient with insufficient residual bone height in the posterior maxilla was treated with a maxillary sinus augmentation procedure with a lateral window technique and simultaneous implant installation using 3-dimensionally printed surgical guides. The surgical guides, used for the preparation of both the lateral window and the implant site according to the optimal prosthodontic and anatomic position, were based on a fully digital workflow and virtual pre-planning with modified implant-planning software. Successful functional and esthetic rehabilitation of the patient was accomplished using standard surgical techniques and instruments but an innovative method for the production and application of surgical templates ensured a precise and safe approach for the lateral window osteotomy preparation. This guided lateral window sinus lift technique may reduce the incidence of surgical complications and failures and enhance patient-related outcomes.

Auxiliary Reflectance Sensor for Guided Surgery with Dental Implants: In Vitro Study

Objectives  The aim of this research was to develop a sensor of approximation by reflectance for guided surgery with dental implants without flap detachment, and verify the effectiveness of this system.

Materials and Methods  Ten models of total edentulous arches were divided into two groups. Two implants of 3.5 × 11.5 mm (NeoDent) were inserted in each model; in Group 1 (G1), a stereolithographic guide NeoGuide system was used. In Group 2 (G2), the experimental approximation sensor was used for the insertion of the implants. The evaluation of the results was performed by overlapping the virtual planning images with the tomographies of the models of the implants inserted.

Results  There were no statistically significant differences between the guide and the sensor groups. The averages and standard deviations observed at the angulation of the guide was 4.15 (2.65 degrees) and 5.48 (2.85 degrees) at the sensor. The linear deviations at the cervical level were 0.002 (1.37) and 0.11 (1.47) mm and at the apical level 0.19 (1.28) and 0.21 (1.42) mm, respectively.

Conclusions  The use of a guide is important for the stabilization of the drills; the greatest challenge is to control the apical position of the implants, especially in highly reabsorbed edges. The experimental sensor can become an auxiliary tool to the stereolithographic guides; however, several difficulties must still be overcome to recommend the use of a sensor.

[Research advances in the use of digital surgical guides in implantology]

Dental implants have become the main choice for patients to fill in their missing teeth. A precise placement is the basis for a functional and aesthetic restoration. A digital surgical guide is a carrier that transfers the preoperative plan of dental implants to the actual surgery. This paper provides some references that can help clinicians improve the accuracy of implant surgery by stating the development, classification, advantages and disadvantages, and factors that affect the accuracy of digital guides.

Concepts for prevention of complications in implant therapy

The use of dental implants is nowadays a well-accepted and highly predictable treatment modality for restoring the dentition and reestablishing the masticatory function of edentulous and partially edentulous patients. Despite the high predictability and excellent long-term survival rates reported for implant therapy, complications may still occur and can jeopardize both short- and long-term success. The present paper provides an overview on the most important aspects related to the etiology, prevention, and management of complications associated with implant therapy. Data from the literature indicate that a number of factors, such as surgical trauma, implant diameter, type of implant-abutment connection, abutment disconnection and reconnection, presence of microgap, and implant malpositioning, can substantially influence the biologic processes of bone remodeling and biofilm formation, thus increasing the rate of short- and long-term hard- and soft-tissue complications. Other factors, such as excess cement at cement-retained prosthetic restorations, abutment mobility, and infections (e.g. peri-implant mucositis and peri-implantitis) caused by bacterial biofilm, are further causes for complications and failures. More recent evidence also indicates that besides the need for sufficient bone volume surrounding the implant, the presence of an adequate width and thickness of attached mucosa may improve biofilm control and limit crestal bone resorption. Furthermore, emerging evidence points also to the pivotal role of human factors as one of the most important causes of complications in implant dentistry. It can be concluded that clinicians need to consider all biologic and biomechanical factors affecting implant placement and survival, as well as undergo adequate training to improve their surgical skills to control and prevent implant complications. Careful patient selection and control of environmental and systemic factors, such as smoking, diabetes etc., coupled with an accurate surgical and prosthetic planning, enable a better prevention and control of infections.