Platelet-derived porous nanomotor for thrombus therapy

NIR-II Light Powered Asymmetric Hydrogel Nanomotors for Enhanced Immunochemotherapy

Nanomotors are appealing drug carriers, and the strength of the propelling force is important for their motion capability. Though high motion efficiency has been achieved with 808 nm light driven Janus-structured noble metal nanomotors, the NIR-I light penetration depth and material biocompatibility limit their broad application. Herein, we develop a 1064 nm NIR-II light driven asymmetric hydrogel nanomotor (AHNM) with high motion capability and load it with doxorubicin for enhanced immunochemotherapy. Magnetic field assisted photopolymerization generates an asymmetric distribution of Fe₃ O₄ @Cu₉ S₈ nanoparticles in the AHNM, producing self-thermophoresis as driving force under NIR-II irradiation. The AHNM is also functionalized with dopamine for the capture and retention of tumor-associated antigens to boost immune activation. The as-obtained NIR-II light driven AHNM has a high tumor tissue penetration capability and enhances immunochemotherapy, providing a promising strategy for cancer therapy.

Thrombus-specific/responsive biomimetic nanomedicine for spatiotemporal thrombolysis and alleviation of myocardial ischemia/reperfusion injury

Acute myocardial infarction (AMI) is usually caused by coronary thrombosis. However, the short half-life, lack of targetability and inevitable ischemia/reperfusion injury secondary to revascularization, which characterizes tissue plasminogen activator (tPA) limit its thrombolytic efficacy for AMI. To address the targeted and site-specific delivery of tPA, the current study reports the construction of a thrombus-targeting and responsive biomimetic nanoparticle (PTPN) for spatiotemporal treatment of AMI. PTPN was constituted by the thrombus microenvironment- responsive phenylboronic acid (PBA) nanocarrier, antioxidant molecular protocatechualdehyde (PC) and tPA with thrombolytic effect, which were enclosed by the platelet membrane. The thrombus-targeting capability of the platelet membrane enabled the adhesion of PTPN to damaged endothelial cells. The nanoparticle disintegrated under slightly acid condition and re-opened the infarct-related artery during the period of ischemia. Sequentially, ROS induced by blood reperfusion was eliminated by PC released from particle disintegration, and the cardiomyocyte mitochondrial function was protected from reperfusion injury. Therefore, this thrombus-specific/responsive biomimetic nanomedicine provides a spatiotemporal paradigm for AMI treatment with promising clinical translation prospects.

Biomimetic Nanoplatelets to Target Delivery Hirudin for Site-Specific Photothermal/Photodynamic Thrombolysis and Preventing Venous Thrombus Formation

Due to the high recurrence rate and mortality of venous thrombosis, there is an urgent need for research on antithrombotic strategies. Because of the short half-life, poor targeting capabilities, bleeding complications, and neurotoxic effects of conventional pharmacological thrombolysis methods, it is essential to develop an alternative strategy to noninvasive thrombolysis and decrease the recurrence rate of venous thrombosis. A platelet-mimetic porphyrin-based covalent organic framework-engineered melanin nanoplatform, to target delivery of hirudin to the vein thrombus site for noninvasive thrombolysis and effective anticoagulation, is first proposed. Owing to the thrombus-hosting properties of platelet membranes, the nanoplatform can target the thrombus site and then activate hyperthermia and reactive oxygen species for thrombolysis under near-infrared light irradiation. The photothermal therapy/photodynamic therapy combo can substantially improve the effectiveness (85.7%) of thrombolysis and prevent secondary embolism of larger fragments. Afterward, the highly loaded (97%) and slow-release hirudin (14 days) are effective in preventing the recurrence of blood clots without the danger of thrombocytopenia. The described biomimetic nanostructures offer a promising option for improving the efficacy of thrombolytic therapy and reducing the risk of bleeding complications in thrombus associated diseases.

Intelligent Micro-/Nanorobots for Cancer Theragnostic

Cancer is one of the most intractable diseases owing to its high mortality rate and lack of effective diagnostic and treatment tools. Advancements in micro-/nanorobot (MNR)-assisted sensing, imaging, and therapeutics offer unprecedented opportunities to develop MNR-based cancer theragnostic platforms. Unlike ordinary nanoparticles, which exhibit Brownian motion in biofluids, MNRs overcome viscous resistance in an ultralow Reynolds number (Re << 1) environment by effective self-propulsion. This unique locomotion property has motivated the advanced design and functionalization of MNRs as a basis for next-generation cancer-therapy platforms, which offer the potential for precise distribution and improved permeation of therapeutic agents. Enhanced barrier penetration, imaging-guided operation, and biosensing are additionally studied to enable the promising cancer-related applications of MNRs. Herein, the recent advances in MNR-based cancer therapy are comprehensively addresses, including actuation engines, diagnostics, medical imaging, and targeted drug delivery; promising research opportunities that can have a profound impact on cancer therapy over the next decade is highlighted.

Self-Propelled Nanomotors with an Alloyed Engine for Emergency Rescue of Traumatic Brain Injury

In severe traumatic brain injury (sTBI), acute oxidative stress and inflammatory cascades rapidly spread to cause irreversible brain damage and low survival rate within minutes. Therefore, developing a feasible solution for the quick-treatment of life-threatening emergency is urgently demanded to earn time for hospital treatment. Herein, Janus catalysis-driven nanomotors (JCNs) are carefully constructed via plasma-induced alloying technology and sputtering-caused half-coating strategy. The theoretical calculation and experiment results indicate that the heteroatom-doping alloyed engine endows JCNs with much higher catalytic activity for removing reactive oxygen species and reactive nitrogen species than common Pt-based engines. When JCNs are dropped to the surface of the ruptured skull, they can effectively catalyze endogenous hydrogen peroxide, which induces movement as fuels to promote JCNs to deep brain lesions for further nanocatalyst-mediated cascade-blocking therapy. The results demonstrate that the JCNs successfully block the inflammatory cascades, thereby reversing multiple behavioral defects and dramatically declining the mortality of sTBI mice. This work provides a revolutionary nanomotor-based strategy to sense brain injury and scavenge oxidative stress. Meanwhile, the JCNs provide a feasible strategy to adapt various first-aid scenarios due to their self-propelled movement combined with highly multienzyme-like catalytic activity, exhibiting tremendous therapeutic potential to help people for emergency pretreatment.

Targeted thrombolysis by magnetoacoustic particles in photothrombotic stroke model

BACKGROUND

Recombinant tissue plasminogen activator (rtPA) has a short half-life, and additional hemorrhagic transformation (HT) can occur when treatment is delayed. Here, we report the design and thrombolytic performance of 3 [Formula: see text]m discoidal polymeric particles loaded with rtPA and superparamagnetic iron oxide nanoparticles (SPIONs), referred to as rmDPPs, to address the HT issues of rtPA.

METHODS

The rmDPPs consisted of a biodegradable polymeric matrix, rtPA, and SPIONs and were synthesized via a top-down fabrication.

RESULTS

The rmDPPs could be concentrated at the target site with magnetic attraction, and then the rtPA could be released under acoustic stimulus. Therefore, we named that the particles had magnetoacoustic properties. For the in vitro blood clot lysis, the rmDPPs with magnetoacoustic stimuli could not enhance the lytic potential compared to the rmDPPs without stimulation. Furthermore, although the reduction of the infarcts in vivo was observed along with the magnetoacoustic stimuli in the rmDPPs, more enhancement was not achieved in comparison with the rtPA. A notable advantage of rmDPPs was shown in delayed administration of rmDPPs at poststroke. The late treatment of rmDPPs with magnetoacoustic stimuli could reduce the infarcts and lead to no additional HT issues, while rtPA alone could not show any favorable prognosis.

CONCLUSION

The rmDPPs may be advantageous in delayed treatment of thrombotic patients.

Applications of Nano/Micromotors for Treatment and Diagnosis in Biological Lumens

Natural biological lumens in the human body, such as blood vessels and the gastrointestinal tract, are important to the delivery of materials. Depending on the anatomic features of these biological lumens, the invention of nano/micromotors could automatically locomote targeted sites for disease treatment and diagnosis. These nano/micromotors are designed to utilize chemical, physical, or even hybrid power in self-propulsion or propulsion by external forces. In this review, the research progress of nano/micromotors is summarized with regard to treatment and diagnosis in different biological lumens. Challenges to the development of nano/micromotors more suitable for specific biological lumens are discussed, and the overlooked biological lumens are indicated for further studies.

Thrombus-targeted nano-agents for NIR-II diagnostic fluorescence imaging-guided flap thromboembolism multi-model therapy

In oral and maxillofacial surgery, flap repair is essential to the quality of postoperative life. Still, thrombosis is fatal for the survival of the flaps. Besides, some postoperative thrombotic diseases, such as pulmonary embolism, also intimidate patients’ life. The traditional diagnostic methods are still limited by a large amount of hardware and suffer from inconvenience, delay, and subjectivity. Moreover, the treatments mainly rely upon thrombolytics, such as urokinase (UK) plasminogen activator, which may cause bleeding risk, especially intracerebral hemorrhage. Herein, a kind of poly (lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) containing a first near-infrared window (NIR-I) phototheranostic agent Y8 and urokinase plasminogen activator (UK) as the core, and modified with the fibrin-targeting peptide Gly–Pro–Arg–Pro–Pro (GPRPP) were developed for the flap and postoperative thromboembolism treatment (named GPRPP-Y8U@P). The conjugated molecule Y8 endows GPRPP-Y8U@P with the capacity of NIR-II imaging and excellent photothermal/photodynamic therapeutic effects. In vivo experiments demonstrated that GPRPP-Y8U@P could quickly locate thrombus by NIR-II fluorescence imaging, and semi-quantitative analysis of the embolized blood vessels' paraffin section verified its thrombolytic efficiency. Additionally, the urokinase trapped in the NPs would not result in nonspecific bleeding, tremendously improving physical security and curative effects with minimizing side effects. Overall, the advantages of GPRPP-Y8U@P, such as precise localization of the thrombus, thrombus ablation in the site, and mild side effects, demonstrated the attractiveness of this approach for effective clinical monitoring of thrombus therapy.

A Fibrinogen-Mimicking, Activated-Platelet-Sensitive Nanocoacervate Enhances Thrombus Targeting and Penetration of Tissue Plasminogen Activator for Effective Thrombolytic Therapy

The development of a fibrinolytic system with long circulation time, high thrombus targeting, efficient thrombus penetration, effective thrombolysis, and minimal hemorrhagic risk remains a major challenge. Herein, inspired by fibrinogen binding to activated platelets in thrombosis, this article reports a fibrinogen-mimicking, activated-platelet-sensitive nanocoacervate to enhance thrombus penetration of tissue plasminogen activator (tPA) for targeted thrombolytic therapy. This biomimetic nanothrombolytic system, denoted as RGD-Chi@tPA, is constructed by "one-pot" coacervation through electrostatic interactions between positively charged arginine-glycine-aspartic acid (RGD)-grafted chitosan (RGD-Chi) and negatively charged tPA. Flow cytometry and confocal laser scanning microscopy measurements show targeting of RGD-Chi@tPA to activated platelets. Controlled tPA release triggered by activated platelets at a thrombus site is demonstrated. Its targeted fibrinolytic and thrombolytic activities are measured in in vitro models. The pharmacokinetic profiles show that RGD-Chi@tPA can significantly prolong circulation time compared to free tPA. In a mouse tail thrombus model, RGD-Chi@tPA displays efficient thrombus targeting and penetration, enabling a complete vascular recanalization as confirmed by the fluorescence imaging, histochemical assay, and laser speckle contrast imager. Consequently, RGD-Chi@tPA induces a substantial enhancement in thrombolysis with minimal hemorrhagic risk compared to free tPA. This simple, effective, and safe platform holds great promise for the development of thrombolytic nanomedicines.

“Motile-targeting” drug delivery platforms based on micro/nanorobots for tumor therapy

Traditional drug delivery systems opened the gate for tumor-targeted therapy, but they generally took advantage of enhanced permeability and retention or ligand-receptor mediated interaction, and thus suffered from limited recognition range (&lt;0.5 nm) and low targeting efficiency (0.7%, median). Alternatively, micro/nanorobots (MNRs) may act as emerging “motile-targeting” drug delivery platforms to deliver therapeutic payloads, thereby making a giant step toward effective and safe cancer treatment due to their autonomous movement and navigation in biological media. This review focuses on the most recent developments of MNRs in “motile-targeting” drug delivery. After a brief introduction to traditional tumor-targeted drug delivery strategies and various MNRs, the representative applications of MNRs in “motile-targeting” drug delivery are systematically streamlined in terms of the propelling mechanisms. Following a discussion of the current challenges of each type of MNR in biomedical applications, as well as future prospects, several promising designs for MNRs that could benefit in “motile-targeting” drug delivery are proposed. This work is expected to attract and motivate researchers from different communities to advance the creation and practical application of the “motile-targeting” drug delivery platforms.

Research progress in the application of colloidal motors for precision medicine

Colloidal motors have unique capabilities of self-propulsion, cargo loading and active target delivery, and have great potential for precision disease therapy. Currently, colloidal motors with different functions have been designed for diverse disease treatments. However, the application of colloidal motors in precision disease treatment is still in the exploratory stage and faces many practical challenges. This review highlights the therapeutic functions of colloidal motors, such as anti-cancer, anti-bacterial, anti-inflammation, hypoglycemic, immune activation and hemostasis functions. Furthermore, the application progress of multifunctional colloidal motors in various diseases has also been summarized, including cerebral diseases, ophthalmic diseases, gastrointestinal diseases, cardiovascular diseases and bladder diseases. Finally, the current limitations and challenges of colloidal motors as well as future research directions are discussed. This review aims to help readers become clearly acquainted with the achievements of colloidal motors that have been made in disease treatment and to promote the further development of colloidal motors in clinical medicine.

Pollen Typhae-Based Magnetic-Powered Microrobots toward Acute Gastric Bleeding Treatment

Traditional Chinese herbal medicine (TCHM) is the naturally available pharmaceutical with millennia of evolution from ancient China, capable of a superior therapeutic index and minimized unwanted effects on the human body. This work presents a therapeutic microrobotic platform based on pollen typhae (PT), a typical type of TCHM, fabricated by coating porous PT microspheres with Fe3O4 nanoparticles (PT robots) via electrostatic adsorption. The PT robots exhibit effective and controllable motion in various biological media upon external magnetic control and, meanwhile, preserve the inherent hemostasis property of PT. The blood clotting capacity of PT robots is attributed to their stimulation of the endogenous blood coagulation pathway and platelets with increased counts, which could be further improved by their effective magnetic propulsion. The remote magnetic control also allows the manipulation of PT robots in mice stomach, inducing enhanced binding and prolonged retention of PT robots in stomach mucosa. Moreover, PT robots upon magnetic control show an enhanced hemostatic effect in treating the mice bearing acute gastric bleeding compared with other passive groups. This work offers a facile and feasible route to integrate TCHM with manmade micromachines possessing the innate curative features of TCHM. Such a design expanded the versatility of microrobots and can be generalized to vast types of TCHM for broader biomedical applications.

Synergistic Integration and Pharmacomechanical Function of Enzyme-Magnetite Nanoparticle Swarms for Low-Dose Fast Thrombolysis

Magnetic micro-/nanoparticles are extensively explored over the past decade as active diagnostic/therapeutic agents for minimally invasive medicine. However, sufficient function integration on these miniaturized bodies toward practical applications remains challenging. This work proposes a synergistic strategy via integrating particle functionalization and bioinspired swarming, demonstrated by recombinant tissue plasminogen activator modified magnetite nanoparticles (rtPA-Fe₃ O₄ NPs) for fast thrombolysis in vivo with low drug dosage. The synthesized rtPA-Fe₃ O₄ NPs exhibit superior magnetic performance, high biocompatibility, and thrombolytic enzyme activity. Benefiting from a customized magnetic operation system designed for animal experiments and preclinical development, these agglomeration-free NPs can assemble into micro-/milli-scale swarms capable of robust maneuver and reconfigurable transformation for on-demand tasks in complex biofluids. Specifically, the spinning mode of the swarm exerts focused fluid shear stresses while rubbing on the thrombus surface, constituting a mechanical force for clot breakdown. The synergy of the NPs' inherent enzymatic effect and swarming-triggered fluid forces enables amplified efficacy of thrombolysis in an in vivo occlusion model of rabbit carotid artery, using lower drug concentration than clinical dosage. Furthermore, swarming-enhanced ultrasound signals aid in imaging-guided treatment. Therefore, the pharmacomechanical NP swarms herein represent an injectable thrombolytic tool joining advantages of intravenous drug therapy and robotic intervention.

Recent advances in smart nanoplatforms for tumor non-interventional embolization therapy

Tumor embolization therapy has attracted great attention due to its high efficiency in inhibiting tumor growth by cutting off tumor nutrition and oxygen supply by the embolic agent. Although transcatheter arterial embolization (TAE) is the mainstream technique in the clinic, there are still some limitations to be considered, especially the existence of high risks and complications. Recently, nanomaterials have drawn wide attention in disease diagnosis, drug delivery, and new types of therapies, such as photothermal therapy and photodynamic therapy, owing to their unique optical, thermal, convertible and in vivo transport properties. Furthermore, the utilization of nanoplatforms in tumor non-interventional embolization therapy has attracted the attention of researchers. Herein, the recent advances in this area are summarized in this review, which revealed three different types of nanoparticle strategies: (1) nanoparticles with active targeting effects or stimuli responsiveness (ultrasound and photothermal) for the safe delivery and responsive release of thrombin; (2) tumor microenvironment (copper and phosphate, acidity and GSH/H₂O₂)-responsive nanoparticles for embolization therapy with high specificity; and (3) peptide-based nanoparticles with mimic functions and excellent biocompatibility for tumor embolization therapy. The benefits and limitations of each kind of nanoparticle in tumor non-interventional embolization therapy will be highlighted. Investigations of nanoplatforms are undoubtedly of great significance, and some advanced nanoplatform systems have arrived at a new height and show potential applications in practical applications.

Biological chemotaxis-guided self-thermophoretic nanoplatform augments colorectal cancer therapy through autonomous mucus penetration

Oral drug delivery systems have great potential to treat colorectal cancer (CRC). However, the drug delivery efficiency is restricted by limited CRC-related intestine positioning and dense mucus barrier. Here, we present a biological chemotaxis-guided self-thermophoretic nanoplatform that facilitates precise intestinal positioning and autonomous mucus penetration. The nanoplatform introduces asymmetric platinum-sprayed mesoporous silica to achieve autonomous movement in intestinal mucus. Furthermore, inspired by the intense interaction between pathogenic microbes and CRC, the nanoplatform is camouflaged by Staphylococcus aureus membrane to precisely anchor in CRC-related intestine. Owing to 4.3-fold higher biological chemotactic anchoring of CRC-related intestine and 14.6-fold higher autonomous mucus penetration performance, the nanoplatform vastly improves the oral bioavailability of cisplatin, leading to a tumor inhibition rate of 99.1% on orthotopic CRC-bearing mice. Together, the exquisitely designed nanoplatform to overcome multiple physiological barriers provides a new horizon for the development of oral drug delivery systems.

Interventional Microbubble Enhanced Sonothrombolysis on Left Ventricular Assist Devices

The left ventricular assist device (LVAD) is often used in the treatment of heart failure. However, 4% to 9% implanted LVAD will have thrombosis problem in one year, which is fatal to the patient's life. In this work, an interventional sonothrombolysis (IST) method is developed to realize the thrombolysis on LVAD. A pair of ultrasound transducer rings is installed on the shell of LVAD, and drug-loaded microbubbles are injected into the LVAD through the interventional method. The microbubbles are adhere on the thrombus with the coated thrombus-targeted drugs, and the thrombolytic drugs carried by the bubbles are brought into the thrombus by the cavitation of bubbles under the ultrasound. In a proof-of-concept experiment in a live sheep model, the thrombus on LVAD is dissolved in 30 min, without damages on LVADs and organs. This IST exhibits to be more efficient and safer compared with other thrombolysis methods on LVAD.

Fluidity-Guided Assembly of Au@Pt on Liposomes as a Catalase-Powered Nanomotor for Effective Cell Uptake in Cancer Cells and Plant Leaves

The fluidity of the liposomes is essential to nanoparticle-membrane interactions. We herein report a liposomal nanomotor system by controlling the self-assembly behavior of gold core-platinum shell nanoparticles (Au@Pt) on liposomes. Au@Pt can aggregate immediately on fluid-phase dioleoyl-sn-glycero-3-phosphocholine (DOPC) liposomes, forming an uneven distribution. By control of the lipid phase and fluidity, either using pure 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) above its phase transition temperature or adding cholesterol as an adjuvant to DPPC lipids, we precisely control the assembly of Au@Pt on liposomes. Au@Pt maintained high catalase-like activity on the liposomal surface, promoting the decomposition of H₂O₂ and the movement of the liposomal nanomotors. Finally, we demonstrate that liposomal nanomotors are biocompatible and they can speed up the cellular uptake in mammalian HepG2 cancer cells and Nicotiana tabacum (Nb) plant leaves. This liposomal nanomotor system is expected to be further investigated in biomedicine and plant nanotechnology.

Long circulation and tumor-targeting biomimetic nanoparticles for efficient chemo/photothermal synergistic therapy

Photothermal therapy combined with chemotherapy based on nanomedicine has been considered a promising strategy for improving therapeutic efficacy in a tumor. However, nanomedicine can be easily cleared by the immune system without specific surface engineering modifications, thus affecting the ultimate efficacy. Herein, multifunctional biomimetic nanoparticles (Bio-RBCm@PDA@MSN-DOX) with enhanced long circulation and targeting ability are constructed by coating large pore-sized mesoporous silica (MSN) with polydopamine (PDA) layers in a biotin modified red blood cell membrane (Bio-RBCm) for efficient chemo/photothermal synergistic therapy. It is demonstrated that Bio-RBCm@PDA@MSN-DOX presents high photothermal conversion efficiency (40.17%) and enhanced capability to accelerate the release of the anticancer drug (doxorubicin, DOX), thus showing a good synergistic therapeutic effect in cell experiments. More importantly, with the assistance of the biotin and RBC membrane, Bio-RBCm@PDA@MSN-DOX can successfully evade immune clearance and effectively target transport to HeLa tumor sites, finally accomplishing up to 98.95% tumor inhibition with negligible side effects to normal tissues. This multilayer structure presents a valuable model for future therapeutic applications with safe and effective tumor chemotherapy and photothermal therapy.

Micro/Nanorobots for Medical Diagnosis and Disease Treatment

Micro/nanorobots are functional devices in microns, at nanoscale, which enable efficient propulsion through chemical reactions or external physical field, including ultrasonic, optical, magnetic, and other external fields, as well as microorganisms. Compared with traditional robots, micro/nanorobots can perform various tasks on the micro/nanoscale, which has the advantages of high precision, strong flexibility, and wide adaptability. In addition, such robots can also perform tasks in a cluster manner. The design and development of micro/nanorobots and the integration of surface functionalization, remote drive system, and imaging tracking technology will become a key step for their medical applications in organisms. Thus, micro/nanorobots are expected to achieve more efficient and accurate local diagnosis and treatment, and they have broad application prospects in the biomedical field. This paper aims to introduce relevant driving methods of micro/nanorobots preparation in detail, summarizes the progress of research in medical applications, and discusses the challenges it faces in clinical applications and the future direction of development.

Bacteria-propelled microtubular motors for efficient penetration and targeting delivery of thrombolytic agents

Effective thrombolysis is critical to rapidly rebuild blood flow for thrombosis patients. Drug delivery systems have been developed to address inadequate pharmacokinetics of thrombolytic agents, but challenges still remain in the timely removal of blood clots regarding the dense fibrin networks. Herein, rod-shaped tubular micromotors were developed to achieve efficient penetration and thorough destruction of thrombi. By using electrospun fiber fragments as the template, urokinase (uPA)-loaded polydopamine (PDA) microtubes with surface decorated fucoidan (^FuPDA_uPA) were prepared at the aspect ratio of around 2. One E. coli Nissle 1917 (EcN) was assembled into one microtube to construct a ^FuPDA_uPA@EcN hybrid micromotor through PDA adhesion and L-aspartate induction. The pharmacokinetic analysis indicates that the encapsulation of uPA into micromotors extends the half-life from 0.4 to 5.6 h and increases the bioavailability over 10 times. EcN-propelled motion elevates adsorption capacities of ^FuPDA_uPA@EcN for more than four times compared with that of ^FuPDA_uPA. The fucoidan-mediated targeting causes 2-fold higher thrombolysis capacity in vitro and over 10-fold higher uPA accumulation in thrombi in vivo. In the treatment of venous thrombi at mouse hindlimbs, intravenous administration of ^FuPDA_uPA@EcN completely removed blood clots with almost full recovery of blood flows and apparently alleviated tail bleeding. It should be noted that ^FuPDA_uPA@EcN treatment at a reduced uPA dose caused no significant difference in the blood flow rate compared with those of ^FuPDA_uPA. The synergistic action of fucoidan-induced targeting and EcN-driven motion provides a prerequisite for promoting thrombolytic efficacy and reducing uPA dose and bleeding side effect. STATEMENT OF SIGNIFICANCE: The standard treatment to thrombosis patient is intravenous infusion of thrombolytic agents, but the associated bleeding complications and impairment of normal haemostasis greatly offset the therapeutic benefits. Drug delivery systems have been developed to address the limitations of inadequate pharmacokinetics of thrombolytic agents, but challenges still exist in less efficient penetration into dense networks for thorough destruction of thrombi. Up to now only few attempts have been made to construct nano-/micromotors for combating thrombosis and there is no single case that antithrombosis is assisted by bacteria or cells-propelled motors. Herein, bacteria-propelled microtubes were developed to carry urokinase for efficient penetration into blood clots and effective thrombolysis. The synergistic action of bacteria-driven motion and specific ligand-induced targeting holds a promising treatment strategy for life-threatening cardiovascular diseases such as thrombosis and atherosclerosis.

Potential nanotherapeutic strategies for perioperative stroke

AIMS

Based on the complex pathological environment of perioperative stroke, the development of targeted therapeutic strategies is important to control the development of perioperative stroke.

DISCUSSIONS

Recently, great progress has been made in nanotechnology, and nanodrug delivery systems have been developed for the treatment of ischemic stroke.

CONCLUSION

In this review, the pathological processes and mechanisms of ischemic stroke during perioperative stroke onset were systematically sorted. As a potential treatment strategy for perioperative stroke, the review also summarizes the multifunctional nanodelivery systems based on ischemic stroke, thus providing insight into the nanotherapeutic strategies for perioperative stroke.

Carrier-Free Trehalose-Based Nanomotors Targeting Macrophages in Inflammatory Plaque for Treatment of Atherosclerosis

Inducing autophagy of macrophages to improve abnormal lipid metabolism is an important way to treat atherosclerosis (AS). Yet, the current application of the mammalian target of rapamycin (mTOR)-dependent autophagy inducers is limited by the side effects and lack of targeting and low biological availability. Herein, a kind of nitric oxide (NO)-driven carrier-free nanomotor based on the reaction between trehalose (Tr, one of the mTOR-independent autophagy inducers), L-arginine (Arg), and phosphatidylserine (PS) is reported. The developed nanomotors use NO as the driving force, which is generated from the reaction between Arg and excessive reactive oxygen species (ROS) and inducible nitric oxide synthase (iNOS) specifically presenting in the AS microenvironment. The high expression of ROS and iNOS in the AS site can be used as chemoattractants to induce chemotaxis behavior of the nanomotors to achieve the first-step targeting an AS plaque. Subsequently, the "eat me" signal sent by PS is exploited to precisely target to the macrophages in the AS plaque, realizing the plaque-macrophage-targeted effect by this step-by-step strategy. In vitro and in vivo results confirm that the introduction of the concept of carrier-free nanomotors has greatly improved the biological availability of trehalose (the dose can be reduced from 2.5 g kg^-1 in previous reports to 0.01 g kg^-1 in this work). Particularly, consumed ROS and the production of NO during the targeting process also play positive roles, in which the former regulates the M2 polarization of macrophages and the latter promotes the reconstruction of an endothelial barrier, which contributes to the multilink treatment of AS.

Doxorubicin-Loaded Walnut-Shaped Polydopamine Nanomotor for Photothermal-Chemotherapy of Cancer

The combination of photothermal therapy and chemical drug therapy shows good prospects in cancer treatment, but there are also some limitations such as low permeability of therapeutic agents and uneven photothermal therapy. Here, we synthesized a walnut-shaped polydopamine (PDA) nanomotor driven by near infrared (NIR) light. The nanomotor was modified by methoxy polyethylene glycol amine (mPEG-NH₂) for improving water solubility. PDA-PEG loaded adriamycin through π-π accumulation and hydrogen bonding. The experimental results showed that the PDA nanomotors had good biocompatibility and photothermal effect. Further, the NIR light irradiation and tumor cell microenvironment are conducive to drug release. In addition, under the irradiation of an NIR laser, the asymmetry of walnut-shaped nanoparticles makes the particles obtain the ability of autonomous movement, which can improve the permeability of particles in 3D tumor balls, which can provide support for drug penetration and heat dispersion. This strategy offers potential innovative materials for photothermal/chemotherapy synergistic therapy of tumors.

Nanoarchitectured prototypes of mesoporous silica nanoparticles for innovative biomedical applications

Despite exceptional morphological and physicochemical attributes, mesoporous silica nanoparticles (MSNs) are often employed as carriers or vectors. Moreover, these conventional MSNs often suffer from various limitations in biomedicine, such as reduced drug encapsulation efficacy, deprived compatibility, and poor degradability, resulting in poor therapeutic outcomes. To address these limitations, several modifications have been corroborated to fabricating hierarchically-engineered MSNs in terms of tuning the pore sizes, modifying the surfaces, and engineering of siliceous networks. Interestingly, the further advancements of engineered MSNs lead to the generation of highly complex and nature-mimicking structures, such as Janus-type, multi-podal, and flower-like architectures, as well as streamlined tadpole-like nanomotors. In this review, we present explicit discussions relevant to these advanced hierarchical architectures in different fields of biomedicine, including drug delivery, bioimaging, tissue engineering, and miscellaneous applications, such as photoluminescence, artificial enzymes, peptide enrichment, DNA detection, and biosensing, among others. Initially, we give a brief overview of diverse, innovative stimuli-responsive (pH, light, ultrasound, and thermos)- and targeted drug delivery strategies, along with discussions on recent advancements in cancer immune therapy and applicability of advanced MSNs in other ailments related to cardiac, vascular, and nervous systems, as well as diabetes. Then, we provide initiatives taken so far in clinical translation of various silica-based materials and their scope towards clinical translation. Finally, we summarize the review with interesting perspectives on lessons learned in exploring the biomedical applications of advanced MSNs and further requirements to be explored.

Rescuing ischemic stroke by biomimetic nanovesicles through accelerated thrombolysis and sequential ischemia-reperfusion protection

Rational design of nanomedicine to accelerate thrombolysis and sequentially avoid thrombolysis-mediated reperfusion injury is still a challenge. Here, we develop a biomimetic nanovesicle (tPA/MNP@PM, tMP) by simple encapsulating melanin nanoparticles (MNP) and tPA with a platelet membrane vesicle (PM), which integrates the thrombus targeting property of PM, the photothermal conversion performance and free radical scavenging property of natural melanin for cascaded ischemic stroke treatment. Benefiting from natural thrombus-targeted adhesion capability of PM, nanovesicles could efficiently target thrombus site. Then near-infrared (NIR) mediated photothermal of MNP could lead to rupture of nanovesicles, thus achieving precise release of tPA in thrombus. Interestingly, local hyperthermia also increases the activity of tPA for accelerating thrombolysis. Afterwards, site specific released MNP (4.5 nm) accompanied by hemoperfusion can cross the BBB and accumulate in cerebral ischemia site, scavenging various free radicals and suppressing inflammation- and immune response-induced injury to achieve neuroprotection after thrombolysis. In addition, the biomimetic nanovesicle could block tPA-induced brain hemorrhage after stroke to improve thrombolytic therapy. The evaluation in ischemic stroke mice confirmed that the simple-prepared nanomedicine with cascaded thrombus targeting, precise thrombolysis and ischemia-reperfusion protection properties can significantly enhance the treatment effect of ischemic stroke. STATEMENT OF SIGNIFICANCE: Ischemic stroke is recognized as a leading cause of death and disability in the world. Rational design of nanomedicine to accelerate thrombolysis and sequentially avoid thrombolysis-mediated reperfusion injury is still a challenge. Herein, a biomimetic nanovesicle (tMP) was developed for sequential ischemic stroke treatment. It could overcome the drawbacks of free tPA for safe thrombolysis: i) platelet membrane biomimetic coating significantly increases thrombus targeting; ii) NIR-mediated photothermal of natural melanin precise controlled release of tPA in thrombus in situ, and local hyperthermia also increases the thrombolytic activity of tPA. Notably, released melanin nanoparticles (4.5 nm) accompanied by hemoperfusion can across BBB and avoid ischemia-reperfusion injury through free radical scavenging and inflammation/immune response suppression.

Multi-Pathway Microenvironment Regulation for Atherosclerosis Therapy Based on Beta-Cyclodextrin/L-Arginine/Au Nanomotors with Dual-Mode Propulsion

Most of the current non-pharmacological treatment strategies for atherosclerosis (AS) suffer from poor penetration into the plaque and only aim at a certain factor in its formation process, resulting in limited therapeutic effect. Herein, a kind of nanomotor with dual-mode propulsion is constructed, which is sensitive to higher reactive oxygen species (ROS) at the AS site and near-infrared (NIR) laser by the covalent binding and self-assembly of β-cyclodextrin (β-CD) and L-arginine (LA) with immobilization of Au nanoparticles. NIR laser irradiation can be used as a driving force and to ablate inflammatory macrophages through the photothermal effect. The nitric oxide (NO) released by the nanomotors can be used as another driving force and a therapeutic agent to promote endothelial repair in the plaque site. LA can eliminate ROS in the inflammatory site, and β-CD can promote the removal of cholesterol from foam cells. In particular, the two driving modes of nanomotors synergistically promote their aggregation and penetration in the plaque. This kind of nanomotor can regulate the microenvironment of AS in multiple ways, including combination therapy for endothelial repair, lipid clearance, and reducing ROS, which is expected to become a potential non-pharmacological strategy in the treatment of AS.

Upconversion nanoparticles regulated drug & gas dual-effective nanoplatform for the targeting cooperated therapy of thrombus and anticoagulation

Thromboembolism is the leading cause of cardiovascular mortality. Currently, for the lack of targeting, short half-life, low bioavailability and high bleeding risk of the classical thrombolytic drugs, pharmacological thrombolysis is usually a slow process based on micro-pumping. In addition, frequently monitoring and regulating coagulation functions are also required during (and after) the process of thrombolysis. To address these issues, a targeted thrombolytic and anticoagulation nanoplatform (UCATS-UK) is developed based on upconversion nanoparticles (UCNPs) that can convert 808 or 980 nm near-infrared (NIR) light into UV/blue light. This nanoplatform can target and enrich in the thrombus site. Synergistic thrombolysis and anticoagulation therapy thus could be realized through the controlled release of urokinase (UK) and nitric oxide (NO). Both in vitro and in vivo experiments have confirmed the excellent thrombolytic and anticoagulative capabilities of this multifunctional nanoplatform. Combined with the unique fluorescent imaging capability of UCNPs, this work is expected to contribute to the development of clinical thrombolysis therapy towards an integrated system of imaging, diagnosis and treatment.

•

This work is not only the first application of UCNPs in the thrombolysis therapy, but also the first attempt to develop a dual effective drug & gas nanoplatform for thrombolytic & anticoagulation therapy.

•

Besides conventional in vitro and animal experiments, a 3D printed vascular model is also constructed to further verify the feasibility of UCATS-UK.

•

Through surface chemical modification, the nanoplatform possesses the capabilities of targeting thrombus, as well as light-controlled NO release for drug-free anticoagulation therapy.

Enzyme Catalysis Biomotor Engineering of Neutrophils for Nanodrug Delivery and Cell-Based Thrombolytic Therapy

Utilizing neutrophils (NEs) to target and deliver nanodrugs to inflammation sites has received considerable attention. NEs are involved in the formation and development of thrombosis by transforming into neutrophil extracellular traps (NETs); this indicates that NEs may be a natural thrombolytic drug delivery carrier. However, NEs lack an effective power system to overcome blood flow resistance and enhance targeting efficiency. Herein, we report the application of a urease catalysis micromotor powered NEs nanodrug delivery system to promote thrombolysis and suppress rethrombosis. The urease micromotor powered Janus NEs (UM-NEs) were prepared by immobilizing the enzyme asymmetrically onto the surface of natural NEs and then loading urokinase (UK) coupled silver (Ag) nanoparticles (Ag-UK) to obtain the UM-NEs (Ag-UK) system. Urease catalytic endogenous urea is used to generate thrust by producing ammonia and carbon dioxide, which propels NEs actively targeting the thrombus. The UM-NEs (Ag-UK) can be activated by enriched inflammatory cytokines to release NETs at the thrombosis site, resulting in a concomitant release of Ag-UK. Ag-UK induces thrombolysis to restore vascular recanalization. This urease micromotor-driven NEs drug delivery system can significantly reduce the hemorrhagic side effects, promote thrombolysis, and inhibit rethrombosis with high bioavailability and biosafety, which can be used for the treatment of thrombotic diseases.

Enzyme-Based Mesoporous Nanomotors with Near-Infrared Optical Brakes

As one of the most important parameters of the nanomotors' motion, precise speed control of enzyme-based nanomotors is highly desirable in many bioapplications. However, owing to the stable physiological environment, it is still very difficult to in situ manipulate the motion of the enzyme-based nanomotors. Herein, inspired by the brakes on vehicles, the near-infrared (NIR) "optical brakes" are introduced in the glucose-driven enzyme-based mesoporous nanomotors to realize remote speed regulation for the first time. The novel nanomotors are rationally designed and fabricated based on the Janus mesoporous nanostructure, which consists of the SiO₂@Au core@shell nanospheres and the enzymes-modified periodic mesoporous organosilicas (PMOs). The nanomotor can be driven by the biofuel of glucose under the catalysis of enzymes (glucose oxidase/catalase) on the PMO domain. Meanwhile, the Au nanoshell at the SiO₂@Au domain enables the generation of the local thermal gradient under the NIR light irradiation, driving the nanomotor by thermophoresis. Taking advantage of the unique Janus nanostructure, the directions of the driving force induced by enzyme catalysis and the thermophoretic force induced by NIR photothermal effect are opposite. Therefore, with the NIR optical speed regulators, the glucose-driven nanomotors can achieve remote speed manipulation from 3.46 to 6.49 μm/s (9.9-18.5 body-length/s) at the fixed glucose concentration, even after covering with a biological tissue. As a proof of concept, the cellar uptake of the such mesoporous nanomotors can be remotely regulated (57.5-109 μg/mg), which offers great potential for designing smart active drug delivery systems based on the mesoporous frameworks of this novel nanomotor.

Hyaluronic acid targeted and pH-responsive multifunctional nanoparticles for chemo-photothermal synergistic therapy of atherosclerosis

Atherosclerosis is a global disease with an extremely high morbidity and fatality rate, so it is necessary to develop effective treatments to reduce its impact. In this work, we successfully prepared a multifunctional drug-loaded nano-delivery system with pH-responsive, CD44-targeted, and chemical-photothermal synergistic treatment. Dendritic mesoporous silica nanoparticles capped with copper sulfide (CuS) were synthesized via an oil-water biphase stratification reaction system; these served as the carrier material and encapsulated the anticoagulant drug heparin (Hep). The pH-sensitive Schiff base bond was used as a gatekeeper and targeting agent to modify hyaluronic acid (HA) on the surface of the nanocarrier. HA coating endowed the nanocomposite with the ability to respond to pH and target CD44-positive inflammatory macrophages. Based on this multifunctional nanocomposite, we achieved precise drug delivery, controlled drug release, and chemical-photothermal synergistic treatment of atherosclerosis. The in vitro drug release results showed that the nanocarriers exhibited excellent drug-controlled release properties, and could release drugs in the weakly acidic microenvironment of atherosclerotic inflammation. Cytotoxicity and cell uptake experiments indicated that nanocarriers had low cytotoxicity against RAW 264.7 cells. Modification of HA to nanocarriers can be effectively internalized by RAW 264.7 cells stimulated by lipopolysaccharide (LPS). Combining CuS photothermal treatment with anti-atherosclerosis chemotherapy showed better effects than single treatment in vitro and in vivo. In summary, our research proved that H-CuS@DMSN-NC-HA has broad application prospects in anti-atherosclerosis.

Upconversion-nanoparticle-functionalized Janus micromotors for efficient detection of uric acid

We report enzyme-powered upconversion-nanoparticle-functionalized Janus micromotors, which are prepared by immobilizing uricase asymmetrically onto the surface of silicon particles, to actively and rapidly detect uric acid. The asymmetric distribution of uricase on silicon particles allows the Janus micromotors to display efficient motion in urine under the propulsion of biocatalytic decomposition of uric acid and simultaneously detect uric acid based on the luminescence quenching effect of the UCNPs modified on the other side of SiO₂. The efficient motion of the motors greatly enhances the interaction between UCNPs and the quenching substrate and improves the uric acid detection efficiency. Overall, such a platform using uric acid simultaneously as the detected substrate and motion fuel offers considerable promise for developing multifunctional micro/nanomotors for a variety of bioassay and biomedical applications.

Core-Shell Structured Micro-Nanomotors: Construction, Shell Functionalization, Applications, and Perspectives

The successful integration of well-designed micro-nanomotors (MNMs) with diverse functional systems, such as, living systems, remote actuation systems, intelligent sensors, and sensing systems, offers many opportunities to not only endow them with diverse functionalization interfaces but also bring augmented or new properties in a wide variety of applications. Core-shell structured MNM systems have been considered to play an important role in a wide range of applications as they provide a platform to integrate multiple complementary components via decoration, encapsulation, or functionalization into a single functional system, being able to protect the active species from harsh environments, and bring improved propulsion performance, stability, non-toxicity, multi-functionality, and dispersibility, etc., which are not easily available from the isolated components. More importantly, the hetero-interfaces between individual components within a core-shell structure might give rise to boosted or new physiochemical properties. This review will bring together these key aspects of the core-shell structured MNMs, ranging from advanced protocols, enhanced/novel functionalities arising from diverse functional shells, to integrated core-shell structured MNMs for diverse applications. Finally, current challenges and future perspectives for the development of core-shell structured MNMs are discussed in term of synthesis, functions, propulsions, and applications.

Biosafety evaluation of dual-responsive neutrobots

Neutrobots carrying antitumor drugs facilitate considerable safety in vivo upon intravenous administration with high dose.

Ultrasound-Propelled Janus Rod-Shaped Micromotors for Site-Specific Sonodynamic Thrombolysis

Antithrombosis therapy is confronted with short half-lives of thrombolytic agents, limited therapeutic effects, and bleeding complications. Drug delivery systems of thrombolytic agents face challenges in effective penetration into thrombi, which are characterized by well-organized fibrin filled with abundant activated platelets. Herein, Janus rod (JR)-shaped micromotors are constructed by side-by-side electrospinning and cryosection, possessing advantages in controlling the Janus structure and aspect ratio of microrods. Silicon phthalocyanine (Pc) and CaO₂ nanoparticles (NPs) are loaded into the separate sides of JRs, and Arg-Gly-Asp (RGD) peptides are grafted on the surface to obtain Pc/Ca@r-JRs for the sonodynamic therapy (SDT) of thrombosis without using any thrombolytic agents. Decomposition of CaO₂ NPs ejects O₂ bubbles from one side of JRs, and ultrasonication of O₂ bubbles produces the cavitation effect, both generating mechanical force to drive the thrombus penetration. The integration of ultrasonication-propelled motion and RGD mediation effectively increases the targeting capabilities of r-JRs to activated platelets. In addition to mechanical thrombolysis, ultrasonication of the released Pc produces ¹O₂ to destruct fibrin networks of clots. In vitro thrombolysis of whole blood clots shows that ultrasonication of Pc/Ca@r-JRs has a significantly higher thrombolysis rate (73.6%) than those without propelled motion or RGD-mediated clot targeting. In a lower limb thrombosis model, intravenous administration of Pc/Ca@r-JRs indicates 3.4-fold higher accumulations at the clot site than those of JRs, and ultrasonication-propelled motion further increases thrombus retention 2.1 times. Treatment with Pc/Ca@r-JRs and ultrasonication fully removes thrombi and significantly prolongs tail bleeding time. Thus, this study has achieved precise and prompt thrombolysis through selective targeting to clots, efficient penetration into dense networks of thrombi, and SDT-executed thrombolysis.

Nitric oxide-driven nanomotors with bowl-shaped mesoporous silica for targeted thrombolysis

Vein thrombosis is one of the most serious types of cardiovascular disease. During the traditional treatment, due to the excessive blood flow rate, the drug utilization rate at the thrombus site is low and the thrombolysis efficiency is poor. In this study, bowl-shaped silica nanomotors driven by nitric oxide (NO) are designed to target the thrombus surface by modifying arginine-glycine-aspartic acid (RGD) polypeptide, and simultaneously loading l-arginine (LA) and thrombolytic drug urokinase (UK) in its mesopore structure. LA can react with excessive reactive oxygen species (ROS) in the thrombus microenvironment to produce NO, thus promoting the movement of nanomotors to improve the retention efficiency and utilization rate of drugs in the thrombus site, and at the same time achieve the effect of eliminating ROS and reducing the oxidative stress of inflammatory endothelial cells. The loaded UK can dissolve thrombus quickly. It is worth mentioning that NO can not only be used as a power source of nanomotors, but also can be used as a therapeutic agent to stimulate the growth of endothelial cells and reduce vascular injury. This therapeutic agent based on nanomotor technology is expected to provide support for future research on thrombus treatment.

Engineered Platelet-Based Micro/Nanomotors for Cancer Therapy

Engineered platelets (PLT) can bring new possibilities for diseases treatment due to the specific response for a variety of physiological disease environments. However, the deep penetration of engineered PLT in diseased tissues such as tumor is still an important challenge that restricts the therapeutic effect. Herein, the engineered PLT micromotor (PLT@PDA-DOX) is constructed by a universal self-polymerization modification method of dopamine, and the chemotherapeutic drug doxorubicin (DOX) is loaded by both π-π stacking interaction with polydopamine (PDA) and cellular endocytosis of PLT. The experimental results prove that PLT@PDA-DOX can target to tumor site by the specific binding of PLT with cancer cells, and then the secondary PLT-derived microparticles (PMP@PDA-DOX) are released with the activation of PLT@PDA-DOX by tumor microenvironment (TME). Besides, benefiting from the photothermal conversion capability of PDA, PLT@PDA-DOX micromotors and PMP@PDA-DOX nanomotors are driven by near-infrared light to realize deep penetration. And the PLT-based micro/nanomotors with propulsion capability possess good performance for tumor ablating in vitro and in vivo. In consideration of the operability, mildness, universality of this modification method and the good biocompatibility of PDA, this work may provide a general paradigm for the construction of engineered cells in disease treatment.

Bioinspired urease-powered micromotor as an active oral drug delivery carrier in stomach

Self-propelling micro- and nano-motors (MNMs) have been extensively investigated as an emerging oral drug delivery carrier for gastrointestinal (GI) tract diseases. However, the propulsion of current MNMs reported so far is mostly based on the redox reaction of metals (such as Zn and Mg) with severe propulsion gas generation, remaining non-degradable residue in the GI tract. Here, we develop a bioinspired enzyme-powered biopolymer micromotor mimicking the mucin penetrating behavior of Helicobacter pylori in the stomach. It converts urea to ammonia and the subsequent increase of pH induces local gel-sol transition of the mucin layer facilitating the penetration into the stomach tissue layer. The successful fabrication of micromotors is confirmed by high-resolution transmission electron microscopy, electron energy loss spectroscopy, dynamic light scattering analysis, zeta-potential analysis. In acidic condition, the immobilized urease can efficiently converted urea to ammonia, comparable with that of neutral condition because of the increase of surrounding pH during propulsion. After administration into the stomach, the micromotors show enhanced penetration and prolonged retention in the stomach for 24 h. Furthermore, histological analysis shows that the micromotors are cleared within 3 days without causing any toxicity in the GI tract. The enhanced penetration and retention of the micromotors as an active oral delivery carrier in the stomach would be successfully harnessed for the treatment of various GI tract diseases.

•

Polydopamine (PDA) hollow microcapsules are biocompatible, biodegradable, and muco-adhesive.

•

Urease-powered PDA micromotors are propelled by the decomposition of urea to ammonia and carbon dioxide.

•

Micromotors increase the local pH to induce the gel-sol transition of the mucus layer.

•

Micromotors result in enhanced penetration and prolonged retention in the stomach.

•

Micromotors can be effectively used for oral drug delivery with complete clearance from the GI tract.

General Thermodynamic-Controlled Coating Method to Prepare Janus Mesoporous Nanomotors for Improving Tumor Penetration

Artificial nanomotors are undergoing significant developments in several biomedical applications. However, current experimental strategies for producing nanomotors still have inherent drawbacks such as the requirement for expensive equipment, strict controlling of experimental conditions, and strenuous processes with several complex procedures. In this study, we describe for the first time a facile single-step thermodynamic-controlled coating method to prepare Janus mesoporous organosilica nanomotors. By controlling the total free energy of organosilica oligomers (G) from a low development level to a high level in the reaction system, the nonspontaneous nucleation on the platinum (Pt) nanosurface and the spontaneous nucleation in a solvent can be controlled, respectively. More importantly, we reveal that the molecular arrangement and contact angle of deposited organosilica on Pt cores vary with the total free energy of organosilica oligomers (G). Different values of θ would change the trend of detachment from Pt for organosilica nucleated cores and carry out diverse coating modes. These are indicated by the morphology evolution of platinum/organosilica hybrids, from naked platinum nanoparticles, evenly distributed organosilica shell/core, nonconcentric to typical Janus nanomotor. The prepared Janus mesoporous nanomotor (JMN) showed typical mesopore structures and active propelling behaviors under H₂O₂ stimulation. In addition, the JMN modified with hyaluronic acid exhibited excellent biocompatibility and improved tumor penetration under H₂O₂ stimulation. The successful construction of other nanomotor frameworks based on a gold-templated core proves the perfect applicability of the thermodynamic-coating method for the production of nanomotors. In conclusion, this work establishes a manufacturing methodology for nanomotors and drives nanomotors for promising biomedical applications.

Multifunctional micro/nanomotors as an emerging platform for smart healthcare applications

Self-propelling micro- and nano-motors (MNMs) are emerging as a multifunctional platform for smart healthcare applications such as biosensing, bioimaging, and targeted drug delivery with high tissue penetration, stirring effect, and rapid drug transport. MNMs can be propelled and/or guided by chemical substances or external stimuli including ultrasound, magnetic field, and light. In addition, enzymatically powered MNMs and biohybrid micromotors have been developed using the biological components in the body. In this review, we describe emerging MNMs focusing on their smart propulsion systems, and diagnostic and therapeutic applications. Finally, we highlight several MNMs for in vivo applications and discuss the future perspectives of MNMs on their current limitations and possibilities toward further clinical applications.

Dual drive mode polydopamine nanomotors for continuous treatment of an inferior vena cava thrombus

It is of great significance to find effective thrombolytic treatments due to the harm caused by thrombosis to human health. Based on the formation mechanism and complex microenvironment of a thrombus, polydopamine nanomotors (PDANMs) modified by the peptide of Arg-Gly-Asp (RGD) and loaded with urokinase (UK) were designed and prepared. A polydopamine (PDA) substrate has a good photothermal conversion effect. Under near-infrared (NIR) light irradiation, it can not only perform photothermal therapy (PTT) on thrombus, but also provide the driving force of PDANMs. Thrombolytic drug UK was loaded in the mesoporous structure of the PDA substrate and can be released at the thrombus site for drug therapy. The modified RGD can target the thrombus site, moreover, benefiting from the guanidine group of L-arginine in the peptide chain, and RGD can interact with reactive oxygen species (ROS) in the thrombus microenvironment to produce nitric oxide (NO). NO not only propelled the movement of nanomotors, but also promoted the growth of vascular endothelial cells to repair damaged blood vessels. The experimental results show that NIR and NO can provide dual driving sources for the nanosystem to achieve continuous and deep penetration of the drug-loaded nanomotors at the thrombus site, while realizing the photothermal and drug synergistic therapy to enhance the therapeutic effect and promote the growth of vascular endothelium cells. This kind of thrombus treatment strategy based on nanomotor drug delivery systems will provide good technical support for the clinical treatment of inferior vena cava thrombus.

A Practical Guide to Analyzing and Reporting the Movement of Nanoscale Swimmers

The recent invention of nanoswimmers-synthetic, powered objects with characteristic lengths in the range of 10-500 nm-has sparked widespread interest among scientists and the general public. As more researchers from different backgrounds enter the field, the study of nanoswimmers offers new opportunities but also significant experimental and theoretical challenges. In particular, the accurate characterization of nanoswimmers is often hindered by strong Brownian motion, convective effects, and the lack of a clear way to visualize them. When coupled with improper experimental designs and imprecise practices in data analysis, these issues can translate to results and conclusions that are inconsistent and poorly reproducible. This Perspective follows the course of a typical nanoswimmer investigation from synthesis through to applications and offers suggestions for best practices in reporting experimental details, recording videos, plotting trajectories, calculating and analyzing mobility, eliminating drift, and performing control experiments, in order to improve the reliability of the reported results.

Thrombus-specific theranostic nanocomposite for codelivery of thrombolytic drug, algae-derived anticoagulant and NIR fluorescent contrast agent

Thrombolysis is a standard treatment for rapidly restoring blood flow. However, the application of urokinase-type plasminogen activator (Uk) in clinical therapy is limited due to its nonspecific distribution and inadequate therapeutic accumulation. Precise thrombus imaging and site-specific drug delivery can enhance the diagnostic and therapeutic efficacy for thrombosis. Accordingly, we developed a P-selectin-specific, photothermal theranostic nanocomposite for thrombus-targeted codelivery of Uk and indocyanine green (ICG, a contrast agent for near-infrared (NIR) fluorescence imaging). We evaluated its capabilities for thrombus imaging and enzyme/hyperthermia combined thrombolytic therapy. Mesoporous silica-coated gold nanorods (Si-AuNRs) were functionalized with an arginine-rich peptide to create an organic template for the adsorption of ICG and fucoidan (Fu), an algae-derived anticoagulant. Uk was loaded into the SiO₂ pores of the Si-AuNRs through the formation of a Fu-Uk-ICG complex on the peptide-functionalized template. The Fu-Uk/ICG@SiAu NRs nanocomposite increased the photostability of ICG and improved its targeting/accumulation at blood clot sites with a strong NIR fluorescence intensity for precise thrombus imaging. Furthermore, ICG incorporated into the nanocomposite enhanced the photothermal effect of Si-AuNRs. Fu, as a P-selectin-targeting ligand, enabled the nanocomposite to target a thrombus site where platelets were activated. The nanocomposite enabled a faster release of Uk for rapid clearing of blood clots and a slower release of Fu for longer lasting prevention of thrombosis regeneration. The nanocomposite with multiple functions, including thrombus-targeting drug delivery, photothermal thrombolysis, and NIR fluorescence imaging, is thus an advanced theranostic platform for thrombolytic therapy with reduced hemorrhaging risk and enhanced imaging/thrombolysis efficiency. STATEMENT OF SIGNIFICANCE: Herein, for the first time, a P-selectin specific, photothermal theranostic nanocomposite for thrombus-targeted co-delivery of urokinase and NIR fluorescence contrast agent indocyanine green (ICG) was developed. We evaluated the potential of this theranostic nanocomposite for thrombus imaging and enzyme/hyperthermia combined thrombolytic therapy. The nanocomposite showed multiple functions including thrombus targeting and imaging, and photothermal thrombolysis. Besides, it allowed faster release of the thrombolytic urokinase for rapidly clearing blood clots and slower release of a brown algae-derived anticoagulant fucoidan (also acting as a P-selectin ligand) for prevention of thrombosis regeneration. The nanocomposite is thus a new and advanced theranostic platform for targeted thrombolytic therapy.

Estimating dynamic vascular perfusion based on Er-based lanthanide nanoprobes with enhanced down-conversion emission beyond 1500 nm

Peripheral artery disease (PAD) is a common, yet serious, circulatory condition that can increase the risk of amputation, heart attack or stroke. Accurate identification of PAD and dynamic monitoring of the treatment efficacy of PAD in real time are crucial for optimizing therapeutic outcomes. However, current imaging techniques do not enable these requirements. Methods: A lanthanide-based nanoprobe with emission in the second near-infrared window b (NIR-IIb, 1500-1700 nm), Er-DCNPs, was utilized for continuous imaging of dynamic vascular structures and hemodynamic alterations in real time using PAD-related mouse models. The NIR-IIb imaging capability, stability, and biocompatibility of Er-DCNPs were evaluated in vitro and in vivo. Results: Owing to their high temporal-spatial resolution in the NIR-IIb imaging window, Er-DCNPs not only exhibited superior capability in visualizing anatomical and pathophysiological features of the vasculature of mice but also provided dynamic information on blood perfusion for quantitative assessment of blood recovery, thereby achieving the synergistic integration of diagnostic and therapeutic imaging functions, which is very meaningful for the successful management of PAD. Conclusion: Our findings indicate that Er-DCNPs can serve as a promising system to facilitate the diagnosis and treatment of PAD as well as other vasculature-related diseases.

Near-Infrared Light-Driven Multifunctional Tubular Micromotors for Treatment of Atherosclerosis

One of the difficulties in atherosclerosis treatment is that the ablation of inflammatory macrophages, repair of vascular endothelial injury, and anti-tissue proliferation should be considered. However, there are few studies that can solve the abovementioned problems simultaneously. Herein, we present a kind of near-infrared (NIR) light-driven multifunctional mesoporous/macroporous tubular micromotor which can rapidly target the damaged blood vessels and release different drugs. Their motion effect can promote themselves to penetrate into the plaque site, and the generated heat effect caused by NIR irradiation can realize the photothermal ablation of inflammatory macrophages. Furthermore, these micromotors can rapidly release the vascular endothelial growth factor for endothelialization and slowly release paclitaxel for antiproliferation to achieve synergistic treatment of atherosclerosis. In vivo results demonstrated that the micromotors can achieve a good therapeutic effect for atherosclerosis. This kind of micro/nanomotor technology with a complex porous structure for drug loading will bring a more potential treatment platform for the disease.

Engineering Active Micro and Nanomotors

Micro- and nanomotors (MNMs) are micro/nanoparticles that can perform autonomous motion in complex fluids driven by different power sources. They have been attracting increasing attention due to their great potential in a variety of applications ranging from environmental science to biomedical engineering. Over the past decades, this field has evolved rapidly, with many significant innovations contributed by global researchers. In this review, we first briefly overview the methods used to propel motors and then present the main strategies used to design proper MNMs. Next, we highlight recent fascinating applications of MNMs in two examplary fields, water remediation and biomedical microrobots, and conclude this review with a brief discussion of challenges in the field.

Biosafety, Functionalities, and Applications of Biomedical Micro/nanomotors

Due to their unique ability to actively move, micro/nanomotors offer the possibility of breaking through the limitations of traditional passive drug delivery systems for the treatment of many diseases, and have attracted the increasing attention of researchers. However, at present, the realization of many advantages of micro/nanomotors in disease treatment in vivo is still in its infancy, because of the complexity and particularity of diseases in different parts of human body. In this Minireview, we first focus on the biosafety and functionality of micro/nanomotors as a biomedical treatment system. Then, we address the treatment difficulties of various diseases in vivo (such as ophthalmic disease, orthopedic disease, gastrointestinal disease, cardiovascular disease, and cancer), and then review the research progress of biomedical micro/nanomotors in the past 20 years, Finally, we propose the challenges in this field and possible future development directions.

Targeting Contrast Agents With Peak Near-Infrared-II (NIR-II) Fluorescence Emission for Non-invasive Real-Time Direct Visualization of Thrombosis

Thrombosis within the vasculature arises when pathological factors compromise normal hemostasis. On doing so, arterial thrombosis (AT) and venous thrombosis (VT) can lead to life-threatening cardio-cerebrovascular complications. Unfortunately, the therapeutic window following the onset of AT and VT is insufficient for effective treatment. As such, acute AT is the leading cause of heart attacks and constitutes ∼80% of stroke incidences, while acute VT can lead to fatal therapy complications. Early lesion detection, their accurate identification, and the subsequent appropriate treatment of thrombi can reduce the risk of thrombosis as well as its sequelae. As the success rate of therapy of fresh thrombi is higher than that of old thrombi, detection of the former and accurate identification of lesions as thrombi are of paramount importance. Magnetic resonance imaging, x-ray computed tomography (CT), and ultrasound (US) are the conventional non-invasive imaging modalities used for the detection and identification of AT and VT, but these modalities have the drawback of providing only image-delayed indirect visualization of only late stages of thrombi development. To overcome such limitations, near-infrared (NIR, ca. 700-1,700 nm) fluorescence (NIRF) imaging has been implemented due to its capability of providing non-invasive real-time direct visualization of biological structures and processes. Contrast agents designed for providing real-time direct or indirect visualization of thrombi using NIRF imaging primarily provide peak NIR-I fluorescence emission (ca. 700-1,000 nm), which affords limited tissue penetration depth and suboptimal spatiotemporal resolution. To facilitate the enhancement of the visualization of thrombosis via providing detection of smaller, fresh, and/or deep-seated thrombi in real time, the development of contrast agents with peak NIR-II fluorescence emission (ca. 1000-1,700 nm) has been recently underway. Currently, however, most contrast agents that provide peak NIR-II fluorescence emissions that are purportedly capable of providing direct visualization of thrombi or their resultant occlusions actually afford only the indirect visualization of such because they only provide for the (i) measuring of the surrounding vascular blood flow and/or (ii) simple tracing of the vasculature. These contrast agents do not target thrombi or occlusions. As such, this mini review summarizes the extremely limited number of targeting contrast agents with peak NIR-II fluorescence emission developed for non-invasive real-time direct visualization of thrombosis that have been recently reported.