Sequence requirements of Escherichia coli attTn7, a specific site of transposon Tn7 insertion

Adeno-associated virus (AAV) Rep proteins mediate complex formation between AAV DNA and its integration site in human DNA

AAV is unique among eukaryotic viruses in the ability of its DNA to integrate preferentially into a specific region of the human genome. Understanding AAV integration may aid in developing gene therapy systems with predictable integration sites. Using a gel mobility-shift assay, we have identified a DNA sequence within the AAV integration locus on human chromosome 19 which is specifically bound by the AAV Rep78 and Rep68 proteins. This Rep recognition sequence is a GCTC repeating motif very similar to sequences within the inverted terminal repeats of the AAV genome which are also bound by Rep78 and Rep68. Cloned oligonucleotides containing the recognition sequence can direct specific binding by Rep proteins. Binding assays with mutant Rep proteins show that the amino-terminal portion of Rep78 and Rep68 can direct binding to either the AAV terminal repeat hairpin DNA or chromosome 19. This human genomic DNA can be complexed with AAV DNA by Rep proteins as demonstrated by a dual-label (32P/biotin) assay. These results suggest a role for Rep in targeting viral integration.

Purification and characterization of TnsC, a Tn7 transposition protein that binds ATP and DNA

The bacterial transposon Tn7 encodes five transposition genes tnsABCDE. We report a simple and rapid procedure for the purification of TnsC protein. We show that purified TnsC is active in and required for Tn7 transposition in a cell-free recombination system. This finding demonstrates that TnsC participates directly in Tn7 transposition and explains the requirement for tnsC function in Tn7 transposition. We have found that TnsC binds adenine nucleotides and is thus a likely site of action of the essential ATP cofactor in Tn7 transposition. We also report that TnsC binds non-specifically to DNA in the presence of ATP or the generally non-hydrolyzable analogues AMP-PNP and ATP-gamma-S, and that TnsC displays little affinity for DNA in the presence of ADP. We speculate that TnsC plays a central role in the selection of target DNA during Tn7 transposition.

Highly preferred site of insertion of Tn7 into the chromosome of Vibrio anguillarum

The possible usefulness of Tn7 as a tool for genetic studies in Vibrio anguillarum was examined. Using the plasmid pRK2073 as the transposon donor, Tn7 transposes at high frequency into the chromosome of V. anguillarum. However, hybridization analysis of the mutants DNA digested with different enzymes revealed that all isolates have the insertions in the same site. This indicates that like in many other gram-negative bacteria, Tn7 shows a specificity of transposition in the chromosome of V. anguillarum. Plasmid pRK2013 proved to be a very useful delivery vector for transposon mutagenesis in V. anguillarum.

Insertion and excision of Bacteroides conjugative chromosomal elements

Many strains of Bacteroides harbor large chromosomal elements that can transfer themselves from the chromosome of the donor to the chromosome of the recipient. Most of them carry a tetracycline resistance (Tcr) gene and have thus been designated Tcr elements. In the present study, we have used transverse alternating field electrophoresis to show that all but one of the Tcr elements screened were approximately 70 to 80 kbp in size. The exception (Tcr Emr 12256) was 150 to 200 kbp in size and may be a hybrid element. All of the Tcr elements inserted in more than one site, but insertion was not random. The Tcr elements sometimes cotransfer unlinked chromosomal segments, or nonreplicating Bacteroides units (NBUs). Transverse alternating field electrophoresis analysis showed that insertion of NBUs was not random and that the NBUs did not insert near the Tcr element. Although attempts to clone one or both ends of a Tcr element have not been successful, ends of a cryptic element (XBU4422) were cloned previously and shown to be homologous to the ends of Tcr elements. We have obtained DNA sequences of junction regions between XBU4422 and its target from several different insertions. Comparison of junction sequences with target sequences showed that no target site duplication occurred during insertion and that XBU4422 carried 4 to 5 bp of adjacent chromosomal DNA when it excised from the chromosome and inserted in a plasmid. We identified a short region of sequence similarity between one of the ends of XBU4422 and its target site that may be important for insertion. This sequence contained an 8-bp segment that was identical to the recombinational hot spot sequence on Tn21. XBU4422 could exise itself from plasmids into which it inserted. In most cases, the excision left a single additional A behind in the target site, but precise excision was seen in one case.

An improved Tn7-based system for the single-copy insertion of cloned genes into chromosomes of gram-negative bacteria

A system is described for the single-copy, stable insertion of cloned DNA sequences into the chromosomes of Gram- bacteria. Two narrow-host-range plasmids form the basis of this system: the 'carrier' plasmid contains the mini Tn7-Km transposon, into which foreign DNA can be cloned; the 'helper' plasmid provides the Tn7 transposition functions in trans. Both plasmids are readily transferred into Gram- bacteria by conjugation. The functionality of this system has been demonstrated in Rhodospirillum rubrum.

Tn7: a target site-specific transposon

The bacterial transposon Tn7 is an unusual mobile DNA segment. Most transposable elements move at low-frequency and display little target site-selectivity. By contrast, Tn7 inserts at high-frequency into a single specific site in the chromosomes of many bacteria. In the absence of this specific site, called attTn7 in Escherichia coli where Tn7 has been most extensively studied, Tn7 transposes at low-frequency and inserts into many different sites. Much has recently been learned about Tn7 transposition from both genetic and biochemical studies. The Tn7 recombination machinery is elaborate and includes a large number of Tn7-encoded proteins, probably host-encoded proteins and also rather large cis-acting transposition sequences at the transposon termini and at the target site. Dissection of the Tn7 transposition mechanism has revealed that the DNA strand breakage and joining reactions that underlie the translocation of Tn7 have several unusual features.

Preferential transposition of an IS630-associated composite transposon to TA in the 5'-CTAG-3' sequence

A composite transposon, Tn4731, associated with IS630 has been shown to transpose preferentially to 5'-TA-3' sequences that are located at two sites in a rho-dependent transcription terminator in plasmid ColE1 in Escherichia coli (T. Tenzen, S. Matsutani, and E. Ohtsubo, J. Bacteriol. 172:3830-3836, 1990). Here we demonstrated that Tn4731 preferentially transposes to TA sequences at four sites in plasmid pUC118 and its derivatives: the TA sequence (hot spot I) in the intergenic region of phage M13 within the pUC sequence, the TA sequence (hot spot II) in the XbaI site in multiple cloning sites of the lacZ coding region, the TA sequence (hot spot III) in a spacer region flanked by inverted repeat sequences of a transcription terminator located downstream of the bla gene, and the TA sequence (hot spot IV) in the middle of bla. Transposition of Tn4731 to hot spot III was found not to require the inverted repeats in the terminator. Transposition of Tn4731 to hot spot II, which is located immediately downstream of the lacZ promoter, was not affected by mutations introduced into the promoter. There appear to be no particular sequences important for transposition of Tn4731 around each of the hot spots, except a palindromic sequence, 5'-CTAG-3', that contains the target sequence. Mutations introduced within the CTAG sequence at a hot spot inhibited Tn4731 from transposing to it, indicating that the CTAG sequence is responsible for the preferential transposition of Tn4731.

Tn7 transposition in vitro proceeds through an excised transposon intermediate generated by staggered breaks in DNA

We have developed a cell-free system in which the bacterial transposon Tn7 inserts at high frequency into its preferred target site in the Escherichia coli chromosome, attTn7; Tn7 transposition in vitro requires ATP and Tn7-encoded proteins. Tn7 transposes via a cut and paste mechanism in which the element is excised from the donor DNA by staggered double-strand breaks and then inserted into attTn7 by the joining of 3' transposon ends to 5' target ends. Neither recombination intermediates nor products are observed in the absence of any protein component or DNA substrate. Thus, we suggest that Tn7 transposition occurs in a nucleoprotein complex containing several proteins and the substrate DNAs and that recognition of attTn7 within this complex provokes strand cleavages at the Tn7 ends.

Site-specific transposition of insertion sequence IS630

IS630 is a 1.15-kilobase sequence in Shigella sonnei that, unlike many mobile elements, seems not to mediate cointegration between different replicons. To assess its transposition, we constructed composite elements containing inverted copies of IS630 flanking a drug resistance gene. We found that these composite elements transposed to plasmid ColE1 in Escherichia coli. DNA sequencing showed that transposition was, in all cases, to the dinucleotide sequence 5'-TA-3'. There were two preferred insertion sites which corresponded to the TA sequences in the inverted repeats of a 13-base-pair stem region of the [rho]-dependent transcription terminator. IS630 is flanked by TA, and nucleotide substitution by in vitro mutagenesis at these ends did not affect transposition activity of a composite element or its ability to insert preferentially into TA within the 13-base-pair inverted repeat sequences or to duplicate the target sequence.

DNA sequence analysis of five genes; tnsA, B, C, D and E, required for Tn7 transposition

A region of DNA sequence of the bacterial transposon Tn7, which is required for transposition, has been determined. This DNA sequence completes an 8351 base pair (bp) region containing five long open reading frames (ORF's) that correspond to the genetically defined genes, tnsA, B, C, D and E, required for Tn7 transposition. All of the ORF's are oriented in the same direction, ie. inward from the element's right end. The genes are in a very compact arrangement with the presumed initiation codons never more than two bases beyond the preceding termination codon. Domains with similarity to the helix-turn-helix genre of Cro-like, sequence specific DNA binding sites occur within the deduced amino acid (a.a.) sequence of the TnsA, TnsB, TnsD and TnsE proteins. Translation of the tnsC ORF reveals strong homology to a consensus sequence for nucleotide binding sites as well as a region of similarity to a transcriptional activator (MalT). No striking a.a. sequence similarity to other DNA recombinases is observed. The possible roles of these proteins in Tn7 transposition is discussed in light of the analysis presented.

Tn4527, a Tp Sp/Sm transposon related to Tn7 and flanked by IS1

Tn4527 was isolated from a Salmonella typhimurium strain obtained in Brazil. Its size is 19.6 kb and it carries resistance to trimethoprim, spectinomycin, and streptomycin, as in the case of Tn7 (14 kb). A restriction analysis of the transposon shows regions of similarity to Tn7 mixed with extra DNA. The 2.6-kb and 2.2-kb HindIII fragments of Tn7, which encode transposition-related proteins, show homology to Tn4527. In contrast to Tn7, Tn4527 is flanked by direct repeats, which seem to be IS1's, as they have appropriate restriction sites and hybridize both to IS1 and to internal IS1 oligonucleotides.

Specificity of insertion of IS91, an insertion sequence present in alpha-haemolysin plasmids of Escherichia coli

We have determined the DNA sequences of eight different insertions of IS91 in a specifically engineered recipient plasmid of known DNA sequence (pSU300). The sequences at the termini of IS91 are 5'-CGAGTAGG...CCTATCGAT. IS91 inserts specifically 5' to either one of the tetranucleotides 5'-GAAC or 5'-CAAG, and always in the same relative orientation with respect to the sequence of the target. Except in one special case, no duplications of the recipient DNA were produced at the site of insertion.

Tn7 transposition: recognition of the attTn7 target sequence

The bacterial transposon Tn7 encodes two distinct but overlapping transposition pathways. tnsABC + tnsD promote transposition to a specific site, attTn7, while tnsABC + tnsE promote transposition to many other sites unrelated to attTn7. We have identified a tnsD-dependent DNA binding activity that specifically recognizes attTn7. We have localized the recognition sequences for this activity to a 28-base-pair region and have shown that this same region can provide specific properties of an attTn7 target in vivo. Interestingly, these sequences are positioned more than 25 base pairs from the specific point of Tn7 insertion.

Transposon Tn7. cis-Acting sequences in transposition and transposition immunity

We have identified and characterized the cis-acting sequences at the termini of the bacterial transposon Tn7 that are necessary for its transposition. Tn7 participates in two kinds of transposition event: high-frequency transposition to a specific target site (attTn7) and low-frequency transposition to apparently random target sites. Our analyses suggest that the same sequences at the Tn7 ends are required for both transposition events. These sequences differ in length and nucleotide structure: about 150 base-pairs at the left end (Tn7L) and about 70 base-pairs at the right end (Tn7R) are necessary for efficient transposition. We also show that the ends of Tn7 are functionally distinct: a miniTn7 element containing two Tn7R ends is active in transposition but an element containing two Tn7L ends is not. We also report that the presence of Tn7's cis-acting transposition sequences anywhere in a target replicon inhibits subsequent insertion of another copy of Tn7 into either an attTn7 target site or into random target sites. The inhibition to an attTn7 target site is most pronounced when the Tn7 ends are immediately adjacent to attTn7. We also show that the presence of Tn7R's cis-acting transposition sequences in a target replicon is necessary and sufficient to inhibit subsequent Tn7 insertion into the target replicon.

Genetic analysis of attTn7, the transposon Tn7 attachment site in Escherichia coli, using a novel M13-based transduction assay

The large (14 kb; kb = 10(3) bases) bacterial transposon, Tn7 (encoding resistance to trimethoprim and streptomycin/spectinomycin), has unusual properties. Like other elements, Tn7 transposes with low efficiency and low target-site specificity, but Tn7 also transposes, with high frequency in a unique orientation, to a preferred "attachment" site, called attTn7, in the Escherichia coli chromosome and similarly into plasmids containing attTn7. We developed a novel bacteriophage M13-based assay system to measure the transposition frequency of Tn7 to M13mp phage vectors containing attTn7 on a cloned 1 kb fragment of chromosomal DNA. Phage harvested from a Tn7 donor strain were used to infect recipient bacteria with selection for trimethoprim resistance. Transposition frequency, expressed as the number of trimethoprim-resistant colonies per plaque-forming unit, was found to be approximately 10(-4) to M13mp::attTn7, in contrast to 10(-10) to M13mp recombinants with approximately 1 kb insertions of other, "generic brand", DNA. By deletion analysis of M13mp::attTn7, we show that attTn7 is contained within a 64 base-pair region; sequences adjacent to the actual insertion site and encoding the carboxy terminus of the glmS gene are required. This assay also provided evidence for transposition immunity conferred by the right end of Tn7.

Oxacillin-hydrolysing beta-lactamases. A comparative analysis at nucleotide and amino acid sequence levels

We have extended the sequence of the OXA-2 beta-lactamase which together with S1 mapping has enabled us to identify the promoter site for this gene. This lies in a region that is found upstream from a variety of resistance genes on different plasmids; each gene appears to have been inserted at the same specific site and to be expressed from the same promoter. The ancestral plasmid thus appears to function as a natural expression vector. The sequence of the recombination site at the 5' end of the OXA-2 gene shows a marked similarity with the attP sequence of lambda. DNA-probe analysis confirmed that the OXA-2 and OXA-3 beta-lactamases are related, and indicated no similarity with other beta-lactamase genes. However, a comparison of amino acid sequences demonstrates that the OXA-2, OXA-1 and PSE-2 beta-lactamases show some similarities to the typical class A enzymes, especially in the central helical domain of the latter, which is largely responsible for forming the active site of the enzyme. The three oxacillinases also show marked amino acid sequence similarity with the product of a regulatory gene, blaR1, required for beta-lactamase induction in Bacillus licheniformis.

A broad-host-range shuttle system for gene insertion into the chromosomes of gram-negative bacteria

A deletion derivative of transposon Tn7 containing the Escherichia coli lacZY genes as a selectable marker for insertion of foreign DNA into the chromosomes of soil bacteria was improved to facilitate the cloning of additional genes and their insertion by this element. This report describes a series of plasmid vectors that enable this cloning to be carried out in small, high-copy, narrow host-range plasmids. The final Tn element can then be easily moved (by transposition) without further use of restriction enzymes, to plasmids suitable for delivering it to the bacterial chromosome. The very high specificity for insertion of Tn7 into single locations in bacterial chromosomes has been exploited in the construction of a shuttle system for delivering these Tn7 elements.

Recognition of Escherichia coli attTn7 by transposon Tn7: lack of specific sequence requirements at the point of Tn7 insertion

Transposon Tn7 inserts at high frequency into a specific site in the Escherichia coli chromosome called attTn7. We show that the point of Tn7 insertion in attTn7 lies within the transcriptional terminator of the bacterial glmS gene. We have exploited the glmS transcription terminator to isolate mutants with altered sequences at the point of Tn7 insertion and have used these mutants to show that the nucleotide sequence at the point of Tn7 insertion is irrelevant to attTn7 target activity. Thus, the nucleotides which provide attTn7 target activity are distinct from the point of Tn7 insertion. We have also examined the effect of transcription on the capacity of attTn7 to act as a target for Tn7 transposition. Our results suggest that transcription of attTn7 does not modulate its Tn7 target activity.

Tn7 transposition: two transposition pathways directed by five Tn7-encoded genes

The bacterial transposon Tn7 is capable of high-frequency transposition to a specific site in the Escherichia coli chromosome, attTn7, and of low-frequency transposition to sites other than attTn7. Using an in vitro insertional mutagenesis procedure, we have identified and characterized five tns (Tn seven) genes that are essential for Tn7 transposition. Three of these genes, tnsA, tnsB, and tnsC, are required, but are not sufficient, for all Tn7 transposition events. In addition, tnsD is specifically required for transposition to attTn7, whereas tnsE is specifically required for transposition to other sites. Thus, Tn7 is an elaborate transposon that encodes two distinct but overlapping transposition pathways.