CelG from Clostridium cellulolyticum: a multidomain endoglucanase acting efficiently on crystalline cellulose

Molecular cloning and transcriptional and expression analysis of engO, encoding a new noncellulosomal family 9 enzyme, from Clostridium cellulovorans

Clostridium cellulovorans produces a major noncellulosomal family 9 endoglucanase EngO. A genomic DNA fragment (40 kb) containing engO and neighboring genes was cloned. The nucleotide sequence contained reading frames for endoglucanase EngO, a putative response regulator, and a putative sensor histidine kinase protein. The engO gene consists of 2,172 bp and encodes a protein of 724 amino acids with a molecular weight of 79,474. Northern hybridizations revealed that the engO gene is transcribed as a monocistronic 2.6-kb mRNA. 5' RNA ligase-mediated rapid amplification of cDNA ends (RLM-RACE) PCR analysis indicated that the single transcriptional start site of engO was located 264 bp upstream from the first nucleotide of the translation initiation codon. Alignment of the engO promoter region provided evidence for highly conserved sequences that exhibited strong similarity to the sigma(A) consensus promoter sequences of gram-positive bacteria. EngO contains a typical N-terminal signal peptide of 28 amino acid residues, followed by a 149-amino-acid sequence which is homologous to the family 4-9 carbohydrate-binding domain. Downstream of this domain was an immunoglobulin-like domain of 89 amino acids. The C terminus contains a family 9 catalytic domain of glycosyl hydrolase. Mass spectrometry analysis of EngO was in agreement with that deduced from the nucleotide sequence. Expression of engO mRNA increased from early to middle exponential phase and decreased during the early stationary phase. EngO was highly active toward carboxymethyl cellulose but showed no activity towards xylan. It was optimally active at 40 to 50 degrees C and pH 5 to 6. The analysis of the products from the cellulose hydrolysis through thin-layer chromatography indicated its endoglucanase activity.

Cellulase, clostridia, and ethanol

Biomass conversion to ethanol as a liquid fuel by the thermophilic and anaerobic clostridia offers a potential partial solution to the problem of the world's dependence on petroleum for energy. Coculture of a cellulolytic strain and a saccharolytic strain of Clostridium on agricultural resources, as well as on urban and industrial cellulosic wastes, is a promising approach to an alternate energy source from an economic viewpoint. This review discusses the need for such a process, the cellulases of clostridia, their presence in extracellular complexes or organelles (the cellulosomes), the binding of the cellulosomes to cellulose and to the cell surface, cellulase genetics, regulation of their synthesis, cocultures, ethanol tolerance, and metabolic pathway engineering for maximizing ethanol yield.

Crystal structure of a type-II cohesin module from the Bacteroides cellulosolvens cellulosome reveals novel and distinctive secondary structural elements

The incorporation of enzymes into the multi-enzyme cellulosome complex and its anchoring to the bacterial cell surface are dictated by a set of binding interactions between two complementary protein modules: the cohesin and the dockerin. In this work, the X-ray crystal structure of a type-II cohesin from scaffoldin A of Bacteroides cellulosolvens has been determined to a resolution of 1.6 angstroms using molecular replacement. The type-II B. cellulosolvens cohesin (Bc-cohesin-II) is the first detailed description of a crystal structure for a type-II cohesin, and its features were compared with the known type-I cohesins from Clostridium thermocellum and Clostridium cellulolyticum (Ct-cohesin-I and Cc-cohesin-I, respectively). The overall jelly-roll topology of the type-II Bc-cohesin is very similar to that observed for the type-I cohesins with three additional secondary structures: an alpha-helix and two "beta-flaps" that disrupt the normal course of a beta-strand. In addition, beta-strand 5 is elevated by approximately 4 angstroms on the surface of the molecule, relative to the type-I Ct and Cc-cohesins. Like its type-I analogue, the hydrophobic/aromatic core of Bc-cohesin-II comprises an upper and lower core, but an additional aromatic patch and conserved tryptophan at the crown of the molecule serves to stabilize the alpha-helix of the type-II cohesin. Comparison of Bc-cohesin-II with the known type-I cohesin-dockerin heterodimer suggests that each of the additional secondary structural elements assumes a flanking position relative to the putative dockerin-binding surface. The raised ridge formed by beta-strand 5 confers additional distinctive topographic features to the proposed binding interface that collectively distinguish between the type-II and type-I cohesins.

Action of designer cellulosomes on homogeneous versus complex substrates: controlled incorporation of three distinct enzymes into a defined trifunctional scaffoldin

In recent work, we reported the self-assembly of a comprehensive set of defined "bifunctional" chimeric cellulosomes. Each complex contained the following: (i) a chimeric scaffoldin possessing a cellulose-binding module and two cohesins of divergent specificity and (ii) two cellulases, each bearing a dockerin complementary to one of the divergent cohesins. This approach allowed the controlled integration of desired enzymes into a multiprotein complex of predetermined stoichiometry and topology. The observed enhanced synergy on recalcitrant substrates by the bifunctional designer cellulosomes was ascribed to two major factors: substrate targeting and proximity of the two catalytic components. In the present work, the capacity of the previously described chimeric cellulosomes was amplified by developing a third divergent cohesin-dockerin device. The resultant trifunctional designer cellulosomes were assayed on homogeneous and complex substrates (microcrystalline cellulose and straw, respectively) and found to be considerably more active than the corresponding free enzyme or bifunctional systems. The results indicate that the synergy between two prominent cellulosomal enzymes (from the family-48 and -9 glycoside hydrolases) plays a crucial role during the degradation of cellulose by cellulosomes and that one dominant family-48 processive endoglucanase per complex is sufficient to achieve optimal levels of synergistic activity. Furthermore cooperation within a cellulosome chimera between cellulases and a hemicellulase from different microorganisms was achieved, leading to a trifunctional complex with enhanced activity on a complex substrate.

Clostridium cellulolyticum: model organism of mesophilic cellulolytic clostridia

Clostridium cellulolyticum ATCC 35319 is a non-ruminal mesophilic cellulolytic bacterium originally isolated from decayed grass. As with most truly cellulolytic clostridia, C. cellulolyticum possesses an extracellular multi-enzymatic complex, the cellulosome. The catalytic components of the cellulosome release soluble cello-oligosaccharides from cellulose providing the primary carbon substrates to support bacterial growth. As most cellulolytic bacteria, C. cellulolyticum was initially characterised by limited carbon consumption and subsequent limited growth in comparison to other saccharolytic clostridia. The first metabolic studies performed in batch cultures suggested nutrient(s) limitation and/or by-product(s) inhibition as the reasons for this limited growth. In most recent investigations using chemostat cultures, metabolic flux analysis suggests a self-intoxication of bacterial metabolism resulting from an inefficiently regulated carbon flow. The investigation of C. cellulolyticum physiology with cellobiose, as a model of soluble cellodextrin, and with pure cellulose, as a carbon source more closely related to lignocellulosic compounds, strengthen the idea of a bacterium particularly well adapted, and even restricted, to a cellulolytic lifestyle. The metabolic flux analysis from continuous cultures revealed that (i) in comparison to cellobiose, the cellulose hydrolysis by the cellulosome introduces an extra regulation of entering carbon flow resulting in globally lower metabolic fluxes on cellulose than on cellobiose, (ii) the glucose 1-phosphate/glucose 6-phosphate branch point controls the carbon flow directed towards glycolysis and dissipates carbon excess towards the formation of cellodextrins, glycogen and exopolysaccharides, (iii) the pyruvate/acetyl-CoA metabolic node is essential to the regulation of electronic and energetic fluxes. This in-depth analysis of C. cellulolyticum metabolism has permitted the first attempt to engineer metabolically a cellulolytic microorganism.

Cellulolysis is severely affected in Clostridium cellulolyticum strain cipCMut1

Progress towards understanding the molecular basis of cellulolysis by Clostridium cellulolyticm was obtained through the study of the first cellulolysis defective mutant strain, namely cipCMut1. In this mutant, a 2 659 bp insertion element, disrupts the cipC gene at the sequence encoding the seventh cohesin of the scaffoldin CipC. cipC is the first gene in a large 'cel' gene cluster, encoding several enzymatic subunits of the cellulosomes, including the processive cellulase Cel48F, which is the major component. Physiological and biochemical studies showed that the mutant strain was affected in cellulosome synthesis and severely impaired in its ability to degrade crystalline cellulose. It produced small amounts of a truncated CipC protein (P120), which had functional cohesin domains and assembled complexes which did not contain any of the enzymes encoded by genes of the 'cel' cluster. The mutant cellulolytic system was mainly composed of three proteins designated P98, P105 and P125. Their N-termini did not match any of the known cellulase sequences from C. cellulolyticum. A large amount of entire CipC produced in the cipCMut1 strain by trans-complementation with plasmid pSOScipC did not restore the cellulolytic phenotype, in spite of the assembly of a larger amount of complexes. The complexes produced in the mutant and complemented strains contained at least 12 different dockerin-containing proteins encoded by genes located outside of the 'cel' cluster. The disturbances observed in the mutant and trans-complemented strains were the result of a strong polar effect resulting from the cipC gene disruption. In conclusion, this study provided genetic evidence that the cellulases encoded by the genes located in the 'cel' cluster are essential for the building of cellulosomes efficient in crystalline cellulose degradation.

Production of heterologous and chimeric scaffoldins by Clostridium acetobutylicum ATCC 824

Clostridium acetobutylicum ATCC 824 converts sugars and various polysaccharides into acids and solvents. This bacterium, however, is unable to utilize cellulosic substrates, since it is able to secrete very small amounts of cellulosomes. To promote the utilization of crystalline cellulose, the strategy we chose aims at producing heterologous minicellulosomes, containing two different cellulases bound to a miniscaffoldin, in C. acetobutylicum. A first step toward this goal describes the production of miniCipC1, a truncated form of CipC from Clostridium cellulolyticum, and the hybrid scaffoldin Scaf 3, which bears an additional cohesin domain derived from CipA from Clostridium thermocellum. Both proteins were correctly matured and secreted in the medium, and their various domains were found to be functional.

The cellulosomes: multienzyme machines for degradation of plant cell wall polysaccharides

The discrete multicomponent, multienzyme cellulosome complex of anaerobic cellulolytic bacteria provides enhanced synergistic activity among the different resident enzymes to efficiently hydrolyze intractable cellulosic and hemicellulosic substrates of the plant cell wall. A pivotal noncatalytic subunit called scaffoldin secures the various enzymatic subunits into the complex via the cohesin-dockerin interaction. The specificity characteristics and tenacious binding between the scaffoldin-based cohesin modules and the enzyme-borne dockerin domains dictate the supramolecular architecture of the cellulosome. The diversity in cellulosome architecture among the known cellulosome-producing bacteria is manifest in the arrangement of their genes in either multiple-scaffoldin or enzyme-linked clusters on the genome. The recently described three-dimensional crystal structure of the cohesin-dockerin heterodimer sheds light on the critical amino acids that contribute to this high-affinity protein-protein interaction. In addition, new information regarding the regulation of cellulosome-related genes, budding genetic tools, and emerging genomics of cellulosome-producing bacteria promises new insight into the assembly and consequences of the multienzyme complex.

A rhamnogalacturonan lyase in the Clostridium cellulolyticum cellulosome

Clostridium cellulolyticum secretes large multienzymatic complexes with plant cell wall-degrading activities named cellulosomes. Most of the genes encoding cellulosomal components are located in a large gene cluster: cipC-cel48F-cel8C-cel9G-cel9E-orfX-cel9H-cel9J-man5K-cel9M. Downstream of the cel9M gene, a new open reading frame was discovered and named rgl11Y. Amino acid sequence analysis indicates that this gene encodes a multidomain pectinase, Rgl11Y, containing an N-terminal signal sequence, a catalytic domain belonging to family 11 of the polysaccharide lyases, and a C-terminal dockerin domain. The present report describes the biochemical characterization of a recombinant form of Rgl11Y. Rgl11Y cleaves the alpha-L-Rhap-(1-->4)-alpha-D-GalpA glycosidic bond in the backbone of rhamnogalacturonan I (RGI) via a beta-elimination mechanism. Its specific activity on potato pectic galactan and rhamnogalacturonan was found to be 28 and 3.6 IU/mg, respectively, indicating that Rgl11Y requires galactan decoration of the RGI backbone. The optimal pH of Rgl11Y is 8.5 and calcium is required for its activity. Rgl11Y was shown to be incorporated in the C. cellulolyticum cellulosome through a typical cohesin-dockerin interaction. Rgl11Y from C. cellulolyticum is the first cellulosomal rhamnogalacturonase characterized.

X-Ray crystal structure of the multidomain endoglucanase Cel9G from Clostridium cellulolyticum complexed with natural and synthetic cello-oligosaccharides

Complete cellulose degradation is the first step in the use of biomass as a source of renewable energy. To this end, the engineering of novel cellulase activity, the activity responsible for the hydrolysis of the beta-1,4-glycosidic bonds in cellulose, is a topic of great interest. The high-resolution X-ray crystal structure of a multidomain endoglucanase from Clostridium cellulolyticum has been determined at a 1.6-A resolution. The endoglucanase, Cel9G, is comprised of a family 9 catalytic domain attached to a family III(c) cellulose-binding domain. The two domains together form a flat platform onto which crystalline cellulose is suggested to bind and be fed into the active-site cleft for endolytic hydrolysis. To further dissect the structural basis of cellulose binding and hydrolysis, the structures of Cel9G in the presence of cellobiose, cellotriose, and a DP-10 thio-oligosaccharide inhibitor were resolved at resolutions of 1.7, 1.8, and 1.9 A, respectively.

Involvement of a protein tyrosine kinase in production of the polymeric bioemulsifier emulsan from the oil-degrading strain Acinetobacter lwoffii RAG-1

The genes associated with the biosynthesis of the polymeric bioemulsifier emulsan, produced by the oil-degrading Acinetobacter lwoffii RAG-1 are clustered within a 27-kbp region termed the wee cluster. This report demonstrates the involvement of two genes of the wee cluster of RAG-1, wzb and wzc, in emulsan biosynthesis. The two gene products, Wzc and Wzb were overexpressed and purified. Wzc exhibited ATP-dependent autophosphorylating protein tyrosine kinase activity. Wzb was found to be a protein tyrosine phosphatase capable of dephosphorylating the phosphorylated Wzc. Using the synthetic substrate p-nitrophenyl phosphate (PNPP) Wzb exhibited a V(max) of 12 micromol of PNPP min(-1) mg(-1) and a K(m) of 8 mM PNPP at 30 degrees C. The emulsifying activity of mutants lacking either wzb or wzc was 16 and 15% of RAG-1 activity, respectively, suggesting a role for the two enzymes in emulsan production. Phosphorylation of Wzc was found to occur within a cluster of five tyrosine residues at the C terminus. Colonies from a mutant in which these five tyrosine residues were replaced by five phenylalanine residues along with those of a second mutant, which also lacked Wzb, exhibited a highly viscous colony consistency. Emulsan activity of these mutants was 25 and 24% of that of RAG-1, respectively. Neither of these mutants contained cell-associated emulsan. However, they did produce an extracellular high-molecular-mass galactosamine-containing polysaccharide. A model is proposed in which subunit polymerization, translocation and release of emulsan are all associated and coregulated by tyrosine phosphorylation.

ISCce1 and ISCce2, two novel insertion sequences in Clostridium cellulolyticum

Two new insertion sequences, ISCce1 and ISCce2, were found to be inserted into the cipC gene of spontaneous mutants of Clostridium cellulolyticum. In these insertional mutants, the cipC gene was disrupted either by ISCce1 alone or by both ISCce1 and ISCce2. ISCce1 is 1,292 bp long and has one open reading frame. The open reading frame encodes a putative 348-amino-acid protein with significant levels of identity with putative proteins having unknown functions and with some transposases belonging to the IS481 and IS3 families. Imperfect 23-bp inverted repeats were found near the extremities of ISCce1. ISCce2 is 1,359 bp long, carries one open reading frame, and has imperfect 35-bp inverted repeats at its termini. The open reading frame encodes a putative 398-amino-acid protein. This protein shows significant levels of identity with transposases belonging to the IS256 family. Upon transposition, both ISCce1 and ISCce2 generate 8-bp direct repeats of the target sequence, but no consensus sequences could be identified at either insertion site. ISCce1 is copied at least 20 times in the genome, as assessed by Southern blot analysis. ISCce2 was found to be mostly inserted into ISCce1. In addition, as neither of the elements was detected in seven other Clostridium species, we concluded that they may be specific to the C. cellulolyticum strain used.

CelI, a noncellulosomal family 9 enzyme from Clostridium thermocellum, is a processive endoglucanase that degrades crystalline cellulose

The family 9 cellulase gene celI of Clostridium thermocellum, was previously cloned, expressed, and characterized (G. P. Hazlewood, K. Davidson, J. I. Laurie, N. S. Huskisson, and H. J. Gilbert, J. Gen. Microbiol. 139:307-316, 1993). We have recloned and sequenced the entire celI gene and found that the published sequence contained a 53-bp deletion that generated a frameshift mutation, resulting in a truncated and modified C-terminal segment of the protein. The enzymatic properties of the wild-type protein were characterized and found to conform to those of other family 9 glycoside hydrolases with a so-called theme B architecture, where the catalytic module is fused to a family 3c carbohydrate-binding module (CBM3c); CelI also contains a C-terminal CBM3b. The intact recombinant CelI exhibited high levels of activity on all cellulosic substrates tested, with pH and temperature optima of 5.5 and 70 degrees C, respectively, using carboxymethylcellulose as a substrate. Native CelI was capable of solubilizing filter paper, and the distribution of reducing sugar between the soluble and insoluble fractions suggests that the enzyme acts as a processive cellulase. A truncated form of the enzyme, lacking the C terminal CBM3b, failed to bind to crystalline cellulose and displayed reduced activity toward insoluble substrates. A truncated form of the enzyme, in which both the cellulose-binding CBM3b and the fused CBM3c were removed, failed to exhibit significant levels of activity on any of the substrates examined. This study underscores the general nature of this type of enzymatic theme, whereby the fused CBM3c plays a critical accessory role for the family 9 catalytic domain and changes its character to facilitate processive cleavage of recalcitrant cellulose substrates.

Characterization of a cellulase containing a family 30 carbohydrate-binding module (CBM) derived from Clostridium thermocellum CelJ: importance of the CBM to cellulose hydrolysis

Clostridium thermocellum CelJ is a modular enzyme containing a family 30 carbohydrate-binding module (CBM) and a family 9 catalytic module at its N-terminal moiety. To investigate the functions of the CBM and the catalytic module, truncated derivatives of CelJ were constructed and characterized. Isothermal titration calorimetric studies showed that the association constants (K(a)) of the CBM polypeptide (CBM30) for the binding of cellopentaose and cellohexaose were 1.2 x 10(4) and 6.4 x 10(4) M(-1), respectively, and that the binding of CBM30 to these ligands is enthalpically driven. Qualitative analyses showed that CBM30 had strong affinity for cellulose and beta-1,3-1,4-mixed glucan such as barley beta-glucan and lichenan. Analyses of the hydrolytic action of the enzyme comprising the CBM and the catalytic module showed that the enzyme is a processive endoglucanse with strong activity towards carboxymethylcellulose, barley beta-glucan and lichenan. By contrast, the catalytic module polypeptide devoid of the CBM showed negligible activity toward these substrates. These observations suggest that the CBM is extremely important not only because it mediates the binding of the enzyme to the substrates but also because it participates in the catalytic function of the enzyme or contributes to maintaining the correct tertiary structure of the family 9 catalytic module for expressing enzyme activity.

Degradation of cellulose substrates by cellulosome chimeras. Substrate targeting versus proximity of enzyme components

A library of 75 different chimeric cellulosomes was constructed as an extension of our previously described approach for the production of model functional complexes (Fierobe, H.-P., Mechaly, A., Tardif, C., Bélaich, A., Lamed, R., Shoham, Y., Bélaich, J.-P., and Bayer, E. A. (2001) J. Biol. Chem. 276, 21257-21261), based on the high affinity species-specific cohesin-dockerin interaction. Each complex contained three protein components: (i) a chimeric scaffoldin possessing an optional cellulose-binding module and two cohesins of divergent specificity, and (ii) two cellulases, each bearing a dockerin complementary to one of the divergent cohesins. The activities of the resultant ternary complexes were assayed using different types of cellulose substrates. Organization of cellulolytic enzymes into cellulosome chimeras resulted in characteristically high activities on recalcitrant substrates, whereas the cellulosome chimeras showed little or no advantage over free enzyme systems on tractable substrates. On recalcitrant cellulose, the presence of a cellulose-binding domain on the scaffoldin and enzyme proximity on the resultant complex contributed almost equally to their elevated action on the substrate. For certain enzyme pairs, however, one effect appeared to predominate over the other. The results also indicate that substrate recalcitrance is not necessarily a function of its crystallinity but reflects the overall accessibility of reactive sites.

Characterization of the cellulolytic complex (cellulosome) of Clostridium acetobutylicum

A large cellulosomal gene cluster was identified in the recently sequenced genome of Clostridium acetobutylicum ATCC 824. Sequence analysis revealed that this cluster contains the genes for the scaffolding protein CipA, the processive endocellulase Cel48A, several endoglucanases of families 5 and 9, the mannanase Man5G, and a hydrophobic protein, OrfXp. Surprisingly, genetic organization of this large cluster is very similar to that of Clostridium cellulolyticum, the model of mesophilic clostridial cellulosomes. As C. acetobutylicum is unable to grow on cellulosic substrates, the existence of a cellulosomal gene cluster in the genome raises questions about its expression, function and evolution. Biochemical evidence for the expression of a cellulosomal protein complex was investigated. The results of sodium dodecyl sulfate-polyacrylamide gel electrophoresis, N-terminal sequencing and Western blotting with antibodies against specific components of the C. cellulolyticum cellulosome suggest that at least four major cellulosomal proteins are present. In addition, despite the fact that no cellulolytic activities were detected, we report here the evidence for the production of a high molecular mass cellulosomal complex in C. acetobutylicum.

Synergistic effects on crystalline cellulose degradation between cellulosomal cellulases from Clostridium cellulovorans

Clostridium cellulovorans produces a multienzyme cellulose-degrading complex called the cellulosome. In this study, we determined the synergistic effects on crystalline cellulose degradation by three different recombinant cellulosomes containing either endoglucanase EngE, endoglucanase EngH, or exoglucanase ExgS bound to mini-CbpA, a part of scaffolding protein CbpA. EngE, EngH, and ExgS are classified into the glycosyl hydrolase families 5, 9, and 48, respectively. The assembly of ExgS and EngH with mini-CbpA increased the activity against insoluble cellulose 1.5- to 3-fold, although no effects on activity against soluble cellulose were observed. These results indicated that mini-CbpA could help cellulase components degrade insoluble cellulose but not soluble cellulose. The mixture of the cellulosomes containing ExgS and EngH showed higher activity and synergy degrees than the other cellulosome mixtures, indicating the synergistic effect between EngH and ExgS was the most dominant effect among the three mixtures for crystalline cellulose degradation. Reactions were also performed by adding different cellulosomes in a sequential manner. When ExgS was used for the initial reaction followed by EngE and EngH, almost no synergistic effect was observed. On the other hand, when EngE or EngH was used for the first reaction followed by ExgS, synergistic effects were observed. These results indicated that the initial reactions by EngH and/or EngE promoted cellulose degradation by ExgS.

Cel9M, a new family 9 cellulase of the Clostridium cellulolyticum cellulosome

A new cellulosomal protein from Clostridium cellulolyticum Cel9M was characterized. The protein contains a catalytic domain belonging to family 9 and a dockerin domain. Cel9M is active on carboxymethyl cellulose, and the hydrolysis of this substrate is accompanied by a decrease in viscosity. Cel9M has a slight, albeit significant, activity on both Avicel and bacterial microcrystalline cellulose, and the main soluble sugar released is cellotetraose. Saccharification of bacterial microcrystalline cellulose by Cel9M in association with two other family 9 enzymes from C. cellulolyticum, namely, Cel9E and Cel9G, was measured, and it was found that Cel9M acts synergistically with Cel9E. Complexation of Cel9M with the mini-CipC1 containing the cellulose binding domain, the X2 domain, and the first cohesin domain of the scaffoldin CipC of the bacterium did not significantly increase the hydrolysis of Avicel and bacterial microcrystalline cellulose.

Temporal secretion of a multicellulolytic system in Myxobacter sp. AL-1. Molecular cloning and heterologous expression of cel9 encoding a modular endocellulase clustered in an operon with cel48, an exocellobiohydrolase gene

The Gram-negative soil micro-organism Myxobacter sp. AL-1 possesses at least five extracellular cellulases, the production of which is regulated by the growth cycle. We cloned the complete gene for one of these cellulases, termed cel9, which encoded a 67-kDa modular family 9 endoglycohydrolase, which was produced during the stationary phase of growth and was strongly enhanced by avicel. The predicted product of cel9 matches the structural architecture of family 9 cellulases such as Thermonospora fusca endo/exocellulase E4. Cel9 protein was synthesized in Escherichia coli from a multicopy plasmid and in Bacillus subtilis from the isopropyl thiogalactoside-inducible Pspac promoter and was purified from the culture medium. Thermal stability, optimum pH and temperature dependence of Cel9 were similar when expressed from either source, and were indistinguishable from related cellulases produced by thermophilic bacteria. Downstream from cel9 was found a partial ORF, designated cel48, the deduced product of which was highly similar to bacterial exocellobiohydrolases and processive endoglucanases belonging to family 48 of the glycosyl hydrolases. The cel9 and cel48 genes appear to be arranged as part of an operon.

Solution structure of the module X2 1 of unknown function of the cellulosomal scaffolding protein CipC of Clostridium cellulolyticum

Multidimensional, homo- and heteronuclear magnetic resonance spectroscopy combined with dynamical annealing has been used to determine the structure of a 94 residue module (X2 1) of the scaffolding protein CipC from the anaerobic bacterium Clostridium cellulolyticum. An experimental data set comprising 1647 nuclear Overhauser effect-derived restraints, 105 hydrogen bond restraints and 66 phi torsion angle restraints was used to calculate 20 converging final solutions. The calculated structures have an average rmsd about the mean structure of 0.55(+/-0.11) A for backbone atoms and 1.40(+/-0.11) A for all heavy atoms when fitted over the secondary structural elements. The X2 1 module has an immunoglobulin-like fold with two beta-sheets packed against each other. One sheet contains three strands, the second contains four strands. An additional strand is intercalated between the beta-sandwich, as well as two turns of a 3(.10) helix. X2 1 has a surprising conformational stability and may act as a conformational linker and solubility enhancer within the scaffolding protein. The fold of X2 1 is very similar to that of telokin, titin Ig domain, hemolin D2 domain, twitchin immunoglobulin domain and the first four domains of the IgSF portion of transmembrane cell adhesion molecule. As a consequence, the X2 1 module is the first prokaryotic member assigned to the I set of the immunoglobulin superfamily even though no sequence similarity with any member of this superfamily could be detected.

A scaffoldin of the Bacteroides cellulosolvens cellulosome that contains 11 type II cohesins

A cellulosomal scaffoldin gene, termed cipBc, was identified and sequenced from the mesophilic cellulolytic anaerobe Bacteroides cellulosolvens. The gene encodes a 2,292-residue polypeptide (excluding the signal sequence) with a calculated molecular weight of 242,437. CipBc contains an N-terminal signal peptide, 11 type II cohesin domains, an internal family III cellulose-binding domain (CBD), and a C-terminal dockerin domain. Its CBD belongs to family IIIb, like that of CipV from Acetivibrio cellulolyticus but unlike the family IIIa CBDs of other clostridial scaffoldins. In contrast to all other scaffoldins thus far described, CipBc lacks a hydrophilic domain or domain X of unknown function. The singularity of CipBc, however, lies in its numerous type II cohesin domains, all of which are very similar in sequence. One of the latter cohesin domains was expressed, and the expressed protein interacted selectively with cellulosomal enzymes, one of which was identified as a family 48 glycosyl hydrolase on the basis of partial sequence alignment. By definition, the dockerins, carried by the cellulosomal enzymes of this species, would be considered to be type II. This is the first example of authentic type II cohesins that are confirmed components of a cellulosomal scaffoldin subunit rather than a cell surface anchoring component. The results attest to the emerging diversity of cellulosomes and their component sequences in nature.

CelE, a multidomain cellulase from Clostridium cellulolyticum: a key enzyme in the cellulosome?

CelE, one of the three major proteins of the cellulosome of Clostridium cellulolyticum, was characterized. The amino acid sequence of the protein deduced from celE DNA sequence led us to the supposition that CelE is a three-domain protein. Recombinant CelE and a truncated form deleted of the putative cellulose binding domain (CBD) were obtained. Deletion of the CBD induces a total loss of activity. Exhibiting rather low levels of activity on soluble, amorphous, and crystalline celluloses, CelE is more active on p-nitrophenyl-cellobiose than the other cellulases from this organism characterized to date. The main product of its action on Avicel is cellobiose (more than 90% of the soluble sugars released), and its attack on carboxymethyl cellulose is accompanied by a relatively small decrease in viscosity. All of these features suggest that CelE is a cellobiohydrolase which has retained a certain capacity for random attack mode. We measured saccharification of Avicel and bacterial microcrystalline cellulose by associations of CelE with four other cellulases from C. cellulolyticum and found that CelE acts synergistically with all tested enzymes. The positive influence of CelE activity on the activities of other cellulosomal enzymes may explain its relative abundance in the cellulosome.

A family 26 mannanase produced by Clostridium thermocellum as a component of the cellulosome contains a domain which is conserved in mannanases from anaerobic fungi

Cellulosomes prepared by the cellulose affinity digestion method from Clostridium thermocellum culture supernatant hydrolysed carob galactomannan during incubation at 60 degrees C and pH 6.5. A recombinant phage expressing mannanase activity was isolated from a library of C. thermocellum genomic DNA constructed in lambdaZAPII. The cloned fragment of DNA containing a putative mannanase gene (manA) was sequenced, revealing an ORF of 1767 nt, encoding a protein (mannanase A; Man26A) of 589 aa with a molecular mass of 66816 Da. The putative catalytic domain (CD) of Man26A, identified by gene sectioning and sequence comparisons, displayed up to 32% identity with other mannanases belonging to family 26. Immediately downstream of the CD and separated from it by a short proline/threonine linker was a duplicated 24-residue dockerin motif, which is conserved in all C. thermocellum cellulosomal enzymes described thus far and mediates their attachment to the cellulosome-integrating protein (CipA). Man26A consisting of the CD alone (Man26A") was hyperexpressed in Escherichia coli BL21(DE3) and purified. The truncated enzyme hydrolysed soluble and insoluble mannan, displaying a temperature optimum of 65 degrees C and a pH optimum of 6.5, but exhibited no activity against other plant cell wall polysaccharides. Antiserum raised against Man26A" cross-reacted with a polypeptide with a molecular mass of 70000 Da that is part of the C. thermocellum cellulosome. A second variant of Man26A containing the N-terminal segment of 130 residues and the CD (Man26A") bound to ivory-nut mannan and weakly to soluble Carob galactomannan and insoluble cellulose. Man26A" consisting of the CD alone did not bind to these polysaccharides. These results indicate that the N-terminal 130 residues of mature Man26A may constitute a weak mannan-binding domain. Sequence comparisons revealed a lack of identity between this region of Man26A and other polysaccharide-binding domains, but significant identity with a region conserved in the three family 26 mannanases from the anaerobic fungus Piromyces equi.

The extracellular xylan degradative system in Clostridium cellulolyticum cultivated on xylan: evidence for cell-free cellulosome production

In this study, we demonstrate that the cellulosome of Clostridium cellulolyticum grown on xylan is not associated with the bacterial cell. Indeed, the large majority of the activity (about 90%) is localized in the cell-free fraction when the bacterium is grown on xylan. Furthermore, about 70% of the detected xylanase activity is associated with cell-free high-molecular-weight complexes containing avicelase activity and the cellulosomal scaffolding protein CipC. The same repartition is observed with carboxymethyl cellulase activity. The cellulose adhesion of xylan-grown cells is sharply reduced in comparison with cellulose-grown cells. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis revealed that cellulosomes derived from xylan- and cellulose-grown cells have different compositions. In both cases, the scaffolding protein CipC is present, but the relative proportions of the other components is dramatically changed depending on the growth substrate. We propose that, depending on the growth substrate, C. cellulolyticum is able to regulate the cell association and cellulose adhesion of cellulosomes and regulate cellulosomal composition.

Active-site mutations which change the substrate specificity of the Clostridium stercorarium cellulase CelZ implications for synergism

CelZ from the cellulolytic thermophile Clostridium stercorarium has been described as a 'monomeric' cellulase able to effect both the endoglucanolytic hydrolysis of internal glycosidic linkages and the exoglucanolytic degradation from the chain ends in a processive mode of action. The putative catalytic residues of this family 9 cellulase, Asp84 and Glu447 located within the N-terminal domain of the modular protein, were replaced by site-directed mutagenesis. A minimized CelZ derivative (CelZC') comprising the catalytic domain and the adjacent cellulose-binding domain (CBD) family IIIc domain C' was used as target for mutagenesis. Six mutant enzymes and the unmodified CelZC' protein were purified to homogeneity and compared with respect to thermoactivity, substrate specificity, product profile and synergism. CD studies revealed that no major changes to the overall structure of the proteins had occurred. Replacement of either one or both catalytic residues completely eliminated the ability of CelZ to attack insoluble Avicel preparations indicative of the exo-activity, whereas the endo-activity measured via hydrolysis of CM-cellulose was retained upon substitution of the catalytic base Asp84. Thus, endo-active CelZ mutants defective in the exo-activity were available for co-operativity studies with the C. stercorarium exoglucanase CelY. Synergism was found to be dependent on the endo-activity of CelZ. Mutants Asp84Gly and Asp84Glu were able to enhance the degradation of crystalline cellulose significantly, although no products could be released from this substrate by individual action of the mutants.

Molecular cloning, sequencing, and expression of a novel multidomain mannanase gene from Thermoanaerobacterium polysaccharolyticum

The manA gene of Thermoanaerobacterium polysaccharolyticum was cloned in Escherichia coli. The open reading frame of manA is composed of 3,291 bases and codes for a preprotein of 1,097 amino acids with an estimated molecular mass of 119,627 Da. The start codon is preceded by a strong putative ribosome binding site (TAAGGCGGTG) and a putative -35 (TTCGC) and -10 (TAAAAT) promoter sequence. The ManA of T. polysaccharolyticum is a modular protein. Sequence comparison and biochemical analyses demonstrate the presence of an N-terminal leader peptide, and three other domains in the following order: a putative mannanase-cellulase catalytic domain, cellulose binding domains 1 (CBD1) and CBD2, and a surface-layer-like protein region (SLH-1, SLH-2, and SLH-3). The CBD domains show no sequence homology to any cellulose binding domain yet reported, hence suggesting a novel CBD. The duplicated CBDs, which lack a disulfide bridge, exhibit 69% identity, and their deletion resulted in both failure to bind to cellulose and an apparent loss of carboxymethyl cellulase and mannanase activities. At the C-terminal region of the gene are three repeats of 59, 67, and 56 amino acids which are homologous to conserved sequences found in the S-layer-associated regions within the xylanases and cellulases of thermophilic members of the Bacillus-Clostridium cluster. The ManA of T. polysaccharolyticum, besides being an extremely active enzyme, is the only mannanase gene cloned which shows this domain structure.

Cellulosomes-structure and ultrastructure

The cellulosome is a macromolecular machine, whose components interact in a synergistic manner to catalyze the efficient degradation of cellulose. The cellulosome complex is composed of numerous kinds of cellulases and related enzyme subunits, which are assembled into the complex by virtue of a unique type of scaffolding subunit (scaffoldin). Each of the cellulosomal subunits consists of a multiple set of modules, two classes of which (dockerin domains on the enzymes and cohesin domains on scaffoldin) govern the incorporation of the enzymatic subunits into the cellulosome complex. Another scaffoldin module-the cellulose-binding domain-is responsible for binding to the substrate. Some cellulosomes appear to be tethered to the cell envelope via similarly intricate, multiple-domain anchoring proteins. The assemblage is organized into dynamic polycellulosomal organelles, which adorn the cell surface. The cellulosome dictates both the binding of the cell to the substrate and its extracellular decomposition to soluble sugars, which are then taken up and assimilated by normal cellular processes.

The crystal structure of the processive endocellulase CelF of Clostridium cellulolyticum in complex with a thiooligosaccharide inhibitor at 2.0 A resolution

The mesophilic bacterium Clostridium cellulolyticum exports multienzyme complexes called cellulosomes to digest cellulose. One of the three major components of the cellulosome is the processive endocellulase CelF. The crystal structure of the catalytic domain of CelF in complex with two molecules of a thiooligosaccharide inhibitor was determined at 2.0 A resolution. This is the first three-dimensional structure to be solved of a member of the family 48 glycosyl hydrolases. The structure consists of an (alpha alpha)6-helix barrel with long loops on the N-terminal side of the inner helices, which form a tunnel, and an open cleft region covering one side of the barrel. One inhibitor molecule is enclosed in the tunnel, the other exposed in the open cleft. The active centre is located in a depression at the junction of the cleft and tunnel regions. Glu55 is the proposed proton donor in the cleavage reaction, while the corresponding base is proposed to be either Glu44 or Asp230. The orientation of the reducing ends of the inhibitor molecules together with the chain translation through the tunnel in the direction of the active centre indicates that CelF cleaves processively cellobiose from the reducing to the non-reducing end of the cellulose chain.

Cellulose, cellulases and cellulosomes

The structural complexity and rigidity of cellulosic substrates have given rise to a phenomenal diversity of degradative enzymes--the cellulases. Cellulolytic microorganisms produce a wide variety of different catalytic and noncatalytic enzyme modules, which form the cellulases and act synergistically on their substrate. In some microbes, several types of cellulases are organized into an elaborate multifunctional supramolecular complex, known as the cellulosome. A combination of molecular genetic, biochemical, chemical, crystallographic and microscopic techniques are paving the way for new insights into both the structure of cellulose and the mechanisms of its hydrolysis.

The modular cellulase CelZ of the thermophilic bacterium Clostridium stercorarium contains a thermostabilizing domain

The non-catalytic region of the Clostridium stercorarium cellulase CelZ (Avicelase I) comprises two protein segments (C and C') grouped into different subfamilies of cellulose-binding domain (CBD) family III. The C-terminally located family IIIb domain C was identified as a true cellulose-binding domain responsible for anchoring the CelZ enzyme to cellulose. The family IIIc domain C' immediately adjacent to the catalytic domain was unable to mediate binding to cellulose. A deletion study revealed a lack of independence of this pair of domains: almost the entire C' domain was required to maintain the catalytic activity and the thermostability of the enzyme.

Intramolecular synergism in an engineered exo-endo-1,4-beta-glucanase fusion protein

Exoglucanase CelY and endoglucanase CelZ from the cellulolytic thermophile Clostridium stercorarium act in synergism to hydrolyse cellulosic substrates. To increase the efficiency of the hydrolytic degradation process, an artificial multienzyme carrying both enzymatic activities on one polypeptide chain was constructed by gene fusion. A segment of CelZ, CelZdeltaBB'C (designated CelZC'), comprising the catalytic domain and the adjacent domain C' homologous to the cellulose-binding domain family IIIc, was fused to the C-terminus of CelY, yielding the fusion protein CelY-CelZC', designated CelYZ. The large fusion protein (170 kDa) could be isolated from a recombinant Escherichia coli strain in its intact form retaining the pronounced thermostability of the fusion partners. As a true multienzmye, CelYZ exhibited both exoglucanase and endoglucanase activities. The cellulolytic activity of the fusion protein was three- to fourfold higher than the sum of the individual activities. Dilution experiments showed that the enhanced cellulolytic activity of the multienzyme resulted from intramolecular synergism of the fusion partners. The product profiles and the kinetic constants of cellulose hydrolysis support a new mechanistic model proposed for explaining the co-operativity of the two catalytic domains within the multienzmye.

Roles of the catalytic domain and two cellulose binding domains of Thermomonospora fusca E4 in cellulose hydrolysis

Thermomonospora fusca E4 is an unusual 90.4-kDa endocellulase comprised of a catalytic domain (CD), an internal family IIIc cellulose binding domain (CBD), a fibronectinlike domain, and a family II CBD. Constructs containing the CD alone (E4-51), the CD plus the family IIIc CBD (E4-68), and the CD plus the fibronectinlike domain plus the family II CBD (E4-74) were made by using recombinant DNA techniques. The activities of each purified protein on bacterial microcrystalline cellulose (BMCC), filter paper, swollen cellulose, and carboxymethyl cellulose were measured. Only the whole enzyme, E4-90, could reach the target digestion of 4.5% on filter paper. Removal of the internal family IIIc CBD (E4-51 and E4-74) decreased activity markedly on every substrate. E4-74 did bind to BMCC but had almost no hydrolytic activity, while E4-68 retained 32% of the activity on BMCC even though it did not bind. A low-activity mutant of one of the catalytic bases, E4-68 (Asp55Cys), did bind to BMCC, although E4-51 (Asp55Cys) did not. The ratios of soluble to insoluble reducing sugar produced after filter paper hydrolysis by E4-90, E4-68, E4-74, and E4-51 were 6.9, 3.5, 1.3, and 0.6, respectively, indicating that the family IIIc CBD is important for E4 processivity.