Liposomes: technologies and analytical applications

Efficient healing of large osseous segmental defects using optimized chemically modified messenger RNA encoding BMP-2

Large segmental osseous defects heal poorly. Recombinant, human bone morphogenetic protein-2 (rhBMP-2) is used clinically to promote bone healing, but it is applied at very high doses that cause adverse side effects and raise costs while providing only incremental benefit. We describe a previously unexplored, alternative approach to bone regeneration using chemically modified messenger RNA (cmRNA). An optimized cmRNA encoding BMP-2 was delivered to critical-sized femoral osteotomies in rats. The cmRNA remained orthotopically localized and generated BMP locally for several days. Defects healed at doses ≥25 μg of BMP-2 cmRNA. By 4 weeks, all animals treated with 50 μg of BMP-2 cmRNA had bridged bone defects without forming the massive callus seen with rhBMP-2. Moreover, such defects recovered normal mechanical strength quicker and initiated bone remodeling faster. cmRNA regenerated bone via endochondral ossification, whereas rhBMP-2 drove intramembranous osteogenesis; cmRNA provides an innovative, safe, and highly translatable technology for bone healing.

Folate-Targeted Liposomal Formulations Improve Effects of Methotrexate in Murine Collagen-Induced Arthritis

Methotrexate (MTX) is first-line therapy for the treatment of rheumatoid arthritis (RA), however, its use may be limited by side effects notably post-injection malaise. When patients are intolerant or become unresponsive, second-line or antibody therapy may be indicated. A folate-targeted liposomal formulation of MTX (FL-MTX) is tropic to arthritic paws and prevents the onset of collagen-induced arthritis (CIA) in the mouse. We optimized the drug-to-lipid molar ratio to 0.15 and demonstrated the therapeutic efficacy of this form at 2 mg/kg MTX intraperitoneal (i.p.) twice a week. These improved liposomes were present in inflamed joints in proportion to the degree of swelling of the paw and bone remodeling activity. FL-MTX had lower hepatic and renal elimination of MTX than the free substance. FL-MTX provided equivalent results when given i.p. or subcutaneous (s.c.) and FL-MTX 2 mg/kg (drug/lipid 0.15), twice weekly, was similar to or more effective than 35 mg/kg MTX (same route and schedule) in reducing the incidence and swelling in the murine CIA model. These results suggest that FL-MTX is a more potent nanotherapeutic formulation than free MTX treatment. Its potential benefits for patients may include reduced frequency of treatment and lower overall doses for a given response.

Production of Bovine Colostrum for Human Consumption to Improve Health

Colostrum contains all essential nutrients for the neonate during the first days of life, with impacts that continue far beyond these first days. Bovine colostrum has been used for human consumption due to the high concentrations of bioactive proteins, vitamins, minerals, growth factors, as well as free and conjugated oligosaccharides. Processes involved in the preparation of bovine colostrum for human consumption play a pivotal role in preserving and maintaining the activity of the bioactive molecules. As bovine colostrum is a multifunctional food that offers a myriad of benefits for human health, assessing the main processes used in preparing it with both advantages and disadvantages is a crucial point to discuss. We discuss major processes effects for colostrum production on the nutritional value, some advanced technologies to preserve processed bovine colostrum and the end-product forms consumed by humans whether as dairy products or dietary supplements.

Stapled Liposomes Enhance Cross-Priming of Radio-Immunotherapy

The release of tumor-associated antigens (TAAs) and their cross-presentation in dendritic cells (DCs) are crucial for radio-immunotherapy. However, the irradiation resistance of tumor cells usually results in limited TAA generation and release. Importantly, TAAs internalized by DCs are easily degraded in lysosomes, resulting in unsatisfactory extent of TAA cross-presentation. Herein, an antigen-capturing stapled liposome (ACSL) with a robust structure and bioactive surface is developed. The ACSLs capture and transport TAAs from lysosomes to the cytoplasm in DCs, thereby enhancing TAA cross-presentation. l-arginine encapsulated in ACSLs induces robust T cell-dependent antitumor response and immune memory in 4T1 tumor-bearing mice after local irradiation, resulting in significant tumor suppression and an abscopal effect. Replacing l-arginine with radiosensitizers, photosensitizers, and photothermal agents may make ACSL a universal platform for the rapid development of various combinations of anticancer therapies.

Biocatalytic self-assembled synthetic vesicles and coacervates: From single compartment to artificial cells

Compartmentalization is an intrinsic feature of living cells that allows spatiotemporal control over the biochemical pathways expressed in them. Over the years, a library of compartmentalized systems has been generated, which includes nano to micrometer sized biomimetic vesicles derived from lipids, amphiphilic block copolymers, peptides, and nanoparticles. Biocatalytic vesicles have been developed using a simple bag containing enzyme design of liposomes to multienzymes immobilized multi-vesicular compartments for artificial cell generation. Additionally, enzymes were also entrapped in membrane-less coacervate droplets to mimic the cytoplasmic macromolecular crowding mechanisms. Here, we have discussed different types of single and multicompartment systems, emphasizing their recent developments as biocatalytic self-assembled structures using recent examples. Importantly, we have summarized the strategies in the development of the self-assembled structure to improvise their adaptivity and flexibility for enzyme immobilization. Finally, we have presented the use of biocatalytic assemblies in mimicking different aspects of living cells, which further carves the path for the engineering of a minimal cell.

Supported Lipid Bilayers (SLBs) to Study Amyloid-Lipid Membrane Interactions with Atomic Force Microscopy

Supported lipid bilayers (SLBs) are model membrane systems that can be used to study the interaction between amyloid fibers and membranes with atomic force microscopy (AFM). This chapter describes the preparation of SLBs on mica that can then be used as a substrate for fiber absorption. AFM can then be used to study the topography of the lipid-protein surface to study the evolution of the fibers, as well as the modifications on the membrane induced by their presence.

Liposomes, new carriers for delivery of genes and anticancer drugs: a systematic review

Today, nanoscience has grown and developed in various fields of medicine and treatment, including cancer treatment. Currently, the existing treatments, including chemotherapy and radiotherapy, cause side effects that are unpleasant to the patient. Due to the fact that anticancer drugs cause severe and widespread side effects, liposomes are considered as new drug carriers to minimize the untimely destruction of the drug when it is delivered to the target tissue and to prevent the side effects of toxic drugs. This systematic review study examined the importance of using liposomes as new drug carriers for the delivery of genes and anticancer drugs. The articles published in English in the databases of Google scholar, WoS, PubMed, Embase, Scopus and science direct were reviewed. According to the results of this study, a new targeted nanosystem has been used for loading and delivering anticancer drugs, genes and controlled drug release which has a significant therapeutic effect compared to the same amount of free drug. In general, liposomal systems have been considered because of their capability in preserving the effect of the drug along with reducing the side effects and toxicity of the drug, especially in the case of anticancer drugs. Accumulation of the drug in a target tissue which results in a reduction of the drug entry into other tissues is the main reason for reducing the side effects of these drugs.

Therapeutic Applications of Extracellular Vesicles for Myocardial Repair

Cardiovascular disease is the leading cause of human death worldwide. Drug thrombolysis, percutaneous coronary intervention, coronary artery bypass grafting and other methods are used to restore blood perfusion for coronary artery stenosis and blockage. The treatments listed prolong lifespan, however, rate of mortality ultimately remains the same. This is due to the irreversible damage sustained by myocardium, in which millions of heart cells are lost during myocardial infarction. The lack of pragmatic methods of myocardial restoration remains the greatest challenge for effective treatment. Exosomes are small extracellular vesicles (EVs) actively secreted by all cell types that act as effective transmitters of biological signals which contribute to both reparative and pathological processes within the heart. Exosomes have become the focus of many researchers as a novel drug delivery system due to the advantages of low toxicity, little immunogenicity and good permeability. In this review, we discuss the progress and challenges of EVs in myocardial repair, and review the recent development of extracellular vesicle-loading systems based on their unique nanostructures and physiological functions, as well as the application of engineering modifications in the diagnosis and treatment of myocardial repair.

Polymer-Lipid Hybrid Materials

Hierarchic self-assembly underpins much of the form and function seen in synthetic or biological soft materials. Lipids are paramount examples, building themselves in nature or synthetically in a variety of meso/nanostructures. Synthetic block copolymers capture many of lipid's structural and functional properties. Lipids are typically biocompatible and high molecular weight polymers are mechanically robust and chemically versatile. The development of new materials for applications like controlled drug/gene/protein delivery, biosensors, and artificial cells often requires the combination of lipids and polymers. The emergent composite material, a "polymer-lipid hybrid membrane", displays synergistic properties not seen in pure components. Specific examples include the observation that hybrid membranes undergo lateral phase separation that can correlate in registry across multiple layers into a three-dimensional phase-separated system with enhanced permeability of encapsulated drugs. It is timely to underpin these emergent properties in several categories of hybrid systems ranging from colloidal suspensions to supported hybrid films. In this review, we discuss the form and function of a vast number of polymer-lipid hybrid systems published to date. We rationalize the results to raise new fundamental understanding of hybrid self-assembling soft materials as well as to enable the design of new supramolecular systems and applications.

Sustained-release ketamine-loaded lipid-particulate system: in vivo assessment in mice

Ketamine is used as an analgesic adjuvant in patients with chronic cancer-related pain. However, ketamine's short half-life requires frequent dose administration. Our aim was to develop a sustained release formulation of ketamine with high loading and to evaluate the in vivo pharmacokinetics and biodistribution in mice. Here, ketamine hydrochloride sustained-release lipid particles (KSL) were developed using the thin-film hydration method. The mean (± SD) encapsulation efficiency (EE) and drug loading (DL) of KSL were 65.6 (± 1.7)% and 72.4 (± 0.5)% respectively, and the mean (± SD) size of the lipid particles and the polydispersity index were 738 (± 137) nm and 0.44 (± 0.02) respectively. The release period of KSL in pH 7.4 medium was 100% complete within 8 h in vitro but a sustained-release profile was observed for more than 5 days after intravenous injection in mice. Importantly, the KSL formulation resulted in a 27-fold increase in terminal half-life, a threefold increase in systemic exposure (AUC_0-∞), and a threefold decrease in clearance compared with the corresponding pharmacokinetics for intravenous ketamine itself. Our findings demonstrate high encapsulation efficiency of ketamine in the sustained-release KSL formulation with prolonged release in mice after systemic dose administration despite 100% in vitro release within 8 h that requires future investigation.

Development of site-specific antibody-conjugated immunoliposomes for sensitive detection of disease biomarkers

Liposome-based immunoassay (LIA) is an attractive protocol for amplifying the detection signals because of the excellent ability of liposomes to encapsulate signal marker compounds. The antigen-binding activity of the conjugated antibodies on the liposomal surface is crucial for the specificity and sensitivity of LIA. We present here a general platform to ensure that antibodies can conjugate onto the surface of liposomes in a site-specific and oriented manner. A His-handle-modified antibody with Fc region-specific and covalent conjugation was first fabricated using a photoactivatable Z_Bpa-His tag that was engineered using the aminoacyl-tRNA synthetase/suppressor tRNA technique. Based on the high affinity between the His tag and divalent metal ions, the novel His-modified antibody was oriented onto the surface of nickel ion-modified liposomes encapsulating horseradish peroxidase. With the prostate-specific antigen as a model, the detection efficiency of the new immunoliposomes was evaluated by chemiluminescence immunoassay. The immunoliposomes exhibited a limit of detection of 0.2 pg mL^-1, which was a six time improvement compared with that of the chemical-coupled antibody-liposome conjugates. Thus, the proposed immunoliposomes are expected to hold potential applications for the sensitive detection of various biomarkers in complicated serum samples.

Milk exosomes: Nature's abundant nanoplatform for theranostic applications

Exosomes are a unique subpopulation of naturally occurring extracellular vesicles which are smaller intracellular membrane nanoparticle vesicles. Exosomes have proven to be excellent nanocarriers for carrying lipids, proteins, mRNAs, non-coding RNAs, and DNAs, and disseminating long-distance intercellular communications in various biological processes. Among various cell-line or biological fluid derived exosomes, milk exosomes are abundant in nature and exhibit many nanocarrier characteristics favorable for theranostic applications. To be an effective delivery carrier for their clinical translation, exosomes must inbuilt loading, release, targeting, and imaging/tracking characteristics. Considering the unmet gaps of milk exosomes in theranostic technology it is essential to focus the current review on drug delivery and imaging applications. This review delineates the efficiency of exosomes to load therapeutic or imaging agents and their successful delivery approaches. It is emphasized on possible modifications of exosomes towards increasing the stability and delivery of agents. This article also summarizes the specific applications and the process of developing milk exosomes as a future pharmaceutical drug delivery vehicle.

Spontaneous Formation of Stable Vesicles and Vesicle Gels in Polar Organic Solvents

The self-assembly of lipids into nanoscale vesicles (liposomes) is routinely accomplished in water. However, reports of similar vesicles in polar organic solvents like glycerol, formamide, and ethylene glycol (EG) are scarce. Here, we demonstrate the formation of nanoscale vesicles in glycerol, formamide, and EG using the common phospholipid lecithin (derived from soy). The samples we study are simple binary mixtures of lecithin and the solvent, with no additional cosurfactants or salt. Lecithin dissolves readily in the solvents and spontaneously gives rise to viscous fluids at low lipid concentrations (∼2-4%), with structures ∼200 nm detected by dynamic light scattering. At higher concentrations (>10%), lecithin forms clear gels that are strongly birefringent at rest. Dynamic rheology confirms the elastic response of gels, with their elastic modulus being ∼20 Pa at ∼10% lipid. Images from cryo-scanning electron microscopy (cryo-SEM) indicate that concentrated samples are "vesicle gels," where multilamellar vesicles (MLVs, also called "onions"), with diameters between 50 and 600 nm, are close-packed across the sample volume. This structure can explain both the elastic rheology as well as the static birefringence of the samples. The discovery of vesicles and vesicle gels in polar solvents widens the scope of systems that can be created by self-assembly. Interestingly, it is much easier to form vesicles in polar solvents than in water, and the former are stable indefinitely, whereas the latter tend to aggregate or coalesce over time. The stability is attributed to refractive index-matching between lipid bilayers and the solvents, i.e., these vesicles are relatively "invisible" and thus experience only weak attractions. The ability to use lipids (which are "green" or eco-friendly molecules derived from renewable natural sources) to thicken and form gels in polar solvents could also prove useful in a variety of areas, including cosmetics, pharmaceuticals, and lubricants.

Droplet Microfluidics for Tumor Drug-Related Studies and Programmable Artificial Cells

Anticancer drug development is a crucial step toward cancer treatment, that requires realistic predictions of malignant tissue development and sophisticated drug delivery. Tumors often acquire drug resistance and drug efficacy, hence cannot be accurately predicted in 2D tumor cell cultures. On the other hand, 3D cultures, including multicellular tumor spheroids (MCTSs), mimic the in vivo cellular arrangement and provide robust platforms for drug testing when grown in hydrogels with characteristics similar to the living body. Microparticles and liposomes are considered smart drug delivery vehicles, are able to target cancerous tissue, and can release entrapped drugs on demand. Microfluidics serve as a high-throughput tool for reproducible, flexible, and automated production of droplet-based microscale constructs, tailored to the desired final application. In this review, it is described how natural hydrogels in combination with droplet microfluidics can generate MCTSs, and the use of microfluidics to produce tumor targeting microparticles and liposomes. One of the highlights of the review documents the use of the bottom-up construction methodologies of synthetic biology for the formation of artificial cellular assemblies, which may additionally incorporate both target cancer cells and prospective drug candidates, as an integrated "droplet incubator" drug assay platform.

Microfluidic and hydrothermal preparation of vesicles using sorbitan monolaurate/polyoxyethylene (20) sorbitan monolaurate (Span 20/Tween 20)

Here, we present a method for preparing vesicles by combining hydrothermal emulsification with solvent diffusion (SD). The sorbitan monolaurate/polyoxyethylene (20) sorbitan monolaurate (Span 20/Tween 20) system was used as the target lipid because these lipids are cheap and advantageous for the production scale. The water-in-oil (W/O) emulsion stabilized with lipids was formed under hydrothermal conditions (240 °C under 10 MPa), followed by mixing with water that included lipids to obtain a W/O-in-water (W/O/W) emulsion. The SD for the W/O/W emulsion as a subsequent process yielded vesicles. The optimal preparation conditions were 50:50 wt% Span 20/Tween 20 as a mixing ratio (final lipid concentration 12 mM), octanoic acid as an organic solvent, 240 °C for 4 min during the hydrothermal treatment, and 4 °C for 24 h in the SD process. The diameter of the vesicles obtained was at most 100 nm, which was comparable to that of the W/O/W emulsion before SD. This suggested that the W/O/W emulsion acted as a template for vesicle formation. The number density, diameter, and membrane properties of vesicles depend on the mixing ratio of the water/oil/lipid system. Specifically, the number density of vesicles was low relative to that of vesicles prepared by the conventional method.

Liposome technologies towards colorectal cancer therapeutics

Colorectal cancer (CRC) is the third most common cancer and the fourth most common deadly cancer worldwide. After treatment with curative intent recurrence rates vary with staging 0-13% in Stage 1, 11-61% in S2 and 28-73% in Stage 3. The toxicity to healthy tissues from chemotherapy and radiotherapy and drug resistance severely affect the quality of life and cancer specific outcomes of CRC patients. To overcome some of these limitations, many efforts have been made to develop nanomaterial-based drug delivery systems. Among these nanocarriers, liposomes represented one of the most successful candidates in delivering targeted oncological treatment, improving safety profile and therapeutic efficacy of encapsulated drugs. In this review we will discuss liposome design with a particular focus on the targeting feature and triggering functions. We will also summarise the recent advances in liposomal delivery system for CRC treatment in both the preclinical and clinical studies. We will finally provide our perspectives on the liposome technology development for the future clinical translation. STATEMENT OF SIGNIFICANCE: Conventional treatments for colorectal cancer (CRC) severely affect the therapeutic effects for advanced patients. With the development of nanomedicines, liposomal delivery system appears to be one of the most promising nanocarriers for CRC treatment. In last three years several reviews in this area have been published focusing on the preclinical research and drug delivery function, which is a fairly narrow focus in the field of liposome technology for CRC therapy. Our review presented the most recent advances of the liposome technology (both clinical and preclinical applications) for CRC with strong potential for further clinical translation. We believe it will attract lots of attention from various audiences, including researchers, clinicians and the industry.

The Whole Is Bigger than the Sum of Its Parts: Drug Transport in the Context of Two Membranes with Active Efflux

Cell envelope plays a dual role in the life of bacteria by simultaneously protecting it from a hostile environment and facilitating access to beneficial molecules. At the heart of this ability lie the restrictive properties of the cellular membrane augmented by efflux transporters, which preclude intracellular penetration of most molecules except with the help of specialized uptake mediators. Recently, kinetic properties of the cell envelope came into focus driven on one hand by the urgent need in new antibiotics and, on the other hand, by experimental and theoretical advances in studies of transmembrane transport. A notable result from these studies is the development of a kinetic formalism that integrates the Michaelis-Menten behavior of individual transporters with transmembrane diffusion and offers a quantitative basis for the analysis of intracellular penetration of bioactive compounds. This review surveys key experimental and computational approaches to the investigation of transport by individual translocators and in whole cells, summarizes key findings from these studies and outlines implications for antibiotic discovery. Special emphasis is placed on Gram-negative bacteria, whose envelope contains two separate membranes. This feature sets these organisms apart from Gram-positive bacteria and eukaryotic cells by providing them with full benefits of the synergy between slow transmembrane diffusion and active efflux.

Generating biomembrane-like local curvature in polymersomes via dynamic polymer insertion

Biomembrane curvature formation has long been observed to be essential in the change of membrane morphology and intracellular processes. The significant importance of curvature formation has attracted scientists from different backgrounds to study it. Although magnificent progress has been achieved using liposome models, the instability of these models restrict further exploration. Here, we report a new approach to mimic biomembrane curvature formation using polymersomes as a model, and poly(N-isopropylacrylamide) to induce the local curvature based on its co-nonsolvency phenomenon. Curvatures form when poly(N-isopropylacrylamide) becomes hydrophobic and inserts into the membrane through solvent addition. The insertion area can be fine-tuned by adjusting the poly(N-isopropylacrylamide) concentration, accompanied by the formation of new polymersome-based non-axisymmetric shapes. Moreover, a systematic view of curvature formation is provided through investigation of the segregation, local distribution and dissociation of inserted poly(N-isopropylacrylamide). This strategy successfully mimicks biomembrane curvature formation in polymersomes and a detailed observation of the insertion can be beneficial for a further understanding of the curvature formation process. Furthermore, polymer insertion induced shape changing could open up new routes for the design of non-axisymmetric nanocarriers and nanomachines to enrich the boundless possibilities of nanotechnology.

Investigating biomembrane curvature formation is important for studying intracellular processes, but the instability of liposome models mimicking these membranes restricts exploration of membrane processes. Here, the authors demonstrate control over the curvature formation in polymersome membranes by insertion of PNIPAm as stimuli responsive polymer.

Gene Delivery Technologies with Applications in Microalgal Genetic Engineering

Microalgae and cyanobacteria are photosynthetic microbes that can be grown with the simple inputs of water, carbon dioxide, (sun)light, and trace elements. Their engineering holds the promise of tailored bio-molecule production using sustainable, environmentally friendly waste carbon inputs. Although algal engineering examples are beginning to show maturity, severe limitations remain in the transformation of multigene expression cassettes into model species and DNA delivery into non-model hosts. This review highlights common and emerging DNA delivery methods used for other organisms that may find future applications in algal engineering.

Microfluidic Assembly: An Innovative Tool for the Encapsulation, Protection, and Controlled Release of Nutraceuticals

Nutraceuticals have been gradually accepted as food ingredients that can offer health benefits and provide protection against several diseases. It is widely accepted due to potential nutritional benefits, safety, and therapeutic effects. Most nutraceuticals are vulnerable to the changes in the external environment, which leads to poor physical and chemical stability and absorption. Several researchers have designed various encapsulation technologies to promote the use of nutraceuticals. Microfluidic technology is an emerging approach which can be used for nutraceutical delivery with precise control. The delivery systems using microfluidic technology have obtained much interest in recent years. In this review article, we have summarized the recently introduced nutraceutical delivery platforms including emulsions, liposomes, microspheres, microgels, and polymer nanoparticles based on microfluidic techniques. Emphasis has been made to discuss the advantages, preparations, characterizations, and applications of nutraceutical delivery systems. Finally, the challenges, several up-scaling methods, and future expectations are discussed.

Versatile Phospholipid Assemblies for Functional Synthetic Cells and Artificial Tissues

The bottom-up construction of a synthetic cell from nonliving building blocks capable of mimicking cellular properties and behaviors helps to understand the particular biophysical properties and working mechanisms of a cell. A synthetic cell built in this way possesses defined chemical composition and structure. Since phospholipids are native biomembrane components, their assemblies are widely used to mimic cellular structures. Here, recent developments in the formation of versatile phospholipid assemblies are described, together with the applications of these assemblies for functional membranes (protein reconstituted giant unilamellar vesicles), spherical and nonspherical protoorganelles, and functional synthetic cells, as well as the high-order hierarchical structures of artificial tissues. Their biomedical applications are also briefly summarized. Finally, the challenges and future directions in the field of synthetic cells and artificial tissues based on phospholipid assemblies are proposed.

Transcript-Activated Coatings on Titanium Mediate Cellular Osteogenesis for Enhanced Osteointegration

Osteointegration is one of the most important factors for implant success. Several biomolecules have been used as part of drug delivery systems to improve implant integration into the surrounding bone tissue. Chemically modified mRNA (cmRNA) is a new form of therapeutic that has been used to induce bone healing. Combined with biomaterials, cmRNA can be used to develop transcript-activated matrices for local protein production with osteoinductive potential. In this study, we aimed to utilize this technology to create bone morphogenetic protein 2 (BMP2) transcript-activated coatings for titanium (Ti) implants. Therefore, different coating methodologies as well as cmRNA incorporation strategies were evaluated. Three different biocompatible biomaterials were used for the coating of Ti, namely, poly-d,l-lactic acid (PDLLA), fibrin, and fibrinogen. cmRNA-coated Ti disks were assayed for transfection efficiency, cmRNA release, cell viability and proliferation, and osteogenic activity in vitro. We found that cmRNA release was significantly delayed in Ti surfaces previously coated with biomaterials. Consequently, the transfection efficiency was greatly improved. PDLLA coating improved the transfection efficiency in a concentration-dependent manner. Lower PDLLA concentration used for the coating of Ti resulted in higher transfection efficiency. Fibrin and fibrinogen coatings showed even higher transfection efficiencies compared to all PDLLA concentrations. In those disks, not only the expression was up to 24-fold higher but also the peak of maximal expression was delayed from 24 h to 5 days, and the duration of expression was also extended until 7 days post-transfection. For fibrin, higher transfection efficiencies were obtained in the coatings with the lowest thrombin amounts. Accordingly, fibrinogen coatings gave the best results in terms of cmRNA transfection. All biomaterial-coated Ti surfaces showed improved cell viability and proliferation, though this was more noticeable in the fibrinogen-coated disks. The latter was also the only coating to support significant amounts of BMP2 produced by C2C12 cells in vitro. Osteogenesis was confirmed using BMP2 cmRNA fibrinogen-coated Ti disks, and it was dependent of the cmRNA amount present. Alkaline phosphatase (ALP) activity of C2C12 increased when using fibrinogen coatings containing 250 ng of cmRNA or more. Similarly, mineralization was also observed that increased with increasing cmRNA concentration. Overall, our results support fibrinogen as an optimal material to deliver cmRNA from titanium-coated surfaces.

In vivo fate of liposomes after subconjunctival ocular delivery

Subconjunctival administration of nanocarriers presents an alternative drug delivery strategy to overcome blood-ocular barriers to enhance drug bioavailability to specific parts of the eye. Using fiberoptic Confocal Laser Microendoscopy (CLM) and radiotracing, we describe the effects of charge, size, cholesterol content and lipid saturation on the ocular and corporal distribution of liposome nanocarriers in live mouse models. Positively charged or large (>250 nm) liposomes exhibit sustained ocular residence times in and around the injection site; cholesterol loading slows down this clearance, whereas lipid saturation accelerates clearance. Neutral, negatively charged, or smaller sized liposomes distribute to the limbus, rich in stem cells and blood capillaries. Differential lymphatic and systemic clearance from the eye to corporeal tissues was also observed across formulations. These results demonstrate the need to optimize liposome design for control over temporal and spatial nanocarrier bioavailability and clearance from the eye for improved efficacy and safety of ocular therapeutics.

Continuous-Flow Production of Liposomes with a Millireactor under Varying Fluidic Conditions

Continuous-flow production of liposomes using microfluidic reactors has demonstrated advantages compared to batch methods, including greater control over liposome size and size distribution and reduced reliance on post-production processing steps. However, the use of microfluidic technology for the production of nanoscale vesicular systems (such as liposomes) has not been fully translated to industrial scale yet. This may be due to limitations of microfluidic-based reactors, such as low production rates, limited lifetimes, and high manufacturing costs. In this study, we investigated the potential of millimeter-scale flow reactors (or millireactors) with a serpentine-like architecture, as a scalable and cost-effective route to the production of nanoscale liposomes. The effects on liposome size of varying inlet flow rates, lipid type and concentration, storage conditions, and temperature were investigated. Liposome size (i.e., mean diameter) and size dispersity were characterised by dynamic light scattering (DLS); z-potential measurements and TEM imaging were also carried out on selected liposome batches. It was found that the lipid type and concentration, together with the inlet flow settings, had significant effects on the properties of the resultant liposome dispersion. Notably, the millifluidic reactor was able to generate liposomes with size and dispersity ranging from 54 to 272 nm, and from 0.04 to 0.52 respectively, at operating flow rates between 1 and 10 mL/min. Moreover, when compared to a batch ethanol-injection method, the millireactor generated liposomes with a more therapeutically relevant size and size dispersity.

Mastering the Tools: Natural versus Artificial Vesicles in Nanomedicine

Naturally occurring extracellular vesicles and artificially made vesicles represent important tools in nanomedicine for the efficient delivery of biomolecules and drugs. Since its first appearance in the literature 50 years ago, the research on vesicles is progressing at a fast pace, with the main goal of developing carriers able to protect cargoes from degradation, as well as to deliver them in a time- and space-controlled fashion. While natural occurring vesicles have the advantage of being fully compatible with their host, artificial vesicles can be easily synthetized and functionalized according to the target to reach. Research is striving to merge the advantages of natural and artificial vesicles, in order to provide a new generation of highly performing vesicles, which would improve the therapeutic index of transported molecules. This progress report summarizes current manufacturing techniques used to produce both natural and artificial vesicles, exploring the promises and pitfalls of the different production processes. Finally, pros and cons of natural versus artificial vesicles are discussed and compared, with special regard toward the current applications of both kinds of vesicles in the healthcare field.

Extraction of Membrane Components from Neisseria gonorrhoeae Using Catanionic Surfactant Vesicles: A New Approach for the Study of Bacterial Surface Molecules

Identification of antigens is important for vaccine production. We tested extraction protocols using cetyltrimethylammonium tosylate (CTAT) and sodium dodecylbenzenesulfonate (SDBS) to formulate surfactant vesicles (SVs) containing components from Neisseria gonorrhoeae. Carbohydrate and protein assays demonstrated that protein and carbohydrates were incorporated into the vesicle leaflet. Depending on the extraction protocol utilized, 100–400 µg of protein/mL of SVs solution was obtained. Gel electrophoresis followed by silver staining demonstrated that SV extracts contained lipooligosaccharide and a subset of bacterial proteins and lipoproteins. Western blotting and mass spectral analysis indicated that the majority of the proteins were derived from the outer membrane. Mass spectrometric and bioinformatics analysis of SVs identified 29 membrane proteins, including porin and opacity-associated protein. Proteins embedded in the SVs leaflet could be degraded by the addition of trypsin or proteinase K. Our data showed that the incorporation of CTAT and SDBS into vesicles eliminated their toxicity as measured by a THP-1 killing assay. Incorporation of gonococcal cell surface components into SVs reduced toxicity as compared to the whole cell extracts, as measured by cytokine induction, while retaining the immunogenicity. This process constitutes a general method for extracting bacterial surface components and identification of antigens that might be included in vaccines.

Liposome-Based Bioassays

This review highlights the potential of using liposomes in bioassays. Liposomes consist of nano- or micro-sized, synthetically constructed phospholipid vesicles. Liposomes can be loaded with a number of reporting molecules that allow a dramatic amplification of the detection threshold in bioassays. Liposome-based sensors bind or react with the biological components of targets through the introduction of properly tailored vectors anchored on their external surface. The use of liposome-based formulations allows the set-up of bioassays that are rapid, sensitive, and often suitable for in-field applications. Selected applications in the field of immunoassays, as well as recognition/assessment of corona proteins, nucleic acids, exosomes, bacteria, and viruses are surveyed. The role of magnetoliposomes is also highlighted as an additional tool in the armory of liposome-based systems for bioassays.

Liposome-Based Study Provides Insight into Cellular Internalization Mechanism of Mosquito-Larvicidal BinAB Toxin

Glycosylphosphatidylinositols (GPIs) anchored proteins are commonly localized onto lipid rafts. These extracellular proteins participate in a variety of cellular functions, including as receptors for viruses and toxins. Intracellular trafficking of World Health Organization recognized mosquito-larvicidal BinAB toxin is mediated via GPI-anchored Cqm1 receptor protein in Culex mosquitoes. We confirmed conformational change in Cqm1 dimer on interaction with BinA/BinB proteins by dynamic light scattering, modelling of hydrodynamic parameters using the atomic structures, and synchrotron Small Angle solution X-ray scattering (SAXS). A reliable model of the receptor-BinB complex was also constructed from joint SAXS/SANS refinement. We confirmed electrostatic interactions of the Cqm1 ectodomain with lipid rafts reconstituted in model membranes and report receptor-dependent impairment of model liposomes by BinA/B proteins. Liposomal disruption was toxin concentration-dependent as monitored by the release of encapsulated carboxyfluorescein dye. Interestingly, BinA alone, without BinB, showed efficient efflux of the fluorescent dye in agreement with the reported high larvicidal activity of BinA variants. The study provides insight into BinA/B toxin internalization mechanism in the membrane model that is toxin internalization is mediated via receptor-dependent pore formation mechanism. It also suggests a tangible and environmentally safe strategy for control of mosquito population.

Calcium Alginate as a Novel Sealing Agent for Colloidosomes

We report on the preparation of colloidosomes formed with a poly(methyl methacrylate-co-butyl acrylate) latex shell, sealed using calcium alginate as a novel nontoxic and biodegradable sealing agent. The aim is to encapsulate enzymes in detergent formulations. The proposed method, with vegetable oil as the continuous phase, avoids the use of harmful organic solvents. Allura Red has been used as a water-soluble dye, in the core, to analyze the influence of variables such as sodium alginate and latex concentrations on the sealing and release profiles. After formation, the capsules were dispersed in either water or propylene glycol. The capsules have been examined using optical, confocal, and scanning electron microscopies. Working with the highest sodium alginate concentration and latex volume, the encapsulation efficiency is between 60 and 80%. Propylene glycol enables a better dispersion of the capsules compared with water. Dye release data have been fitted to exponential and Michaelis-Menten-type equations, leading to kinetic parameters that allow the simulation of the release process.

Development of New Strategies Using Extracellular Vesicles Loaded with Exogenous Nucleic Acid

Gene therapy is a therapeutic strategy of delivering foreign genetic material (encoding for an important protein) into a patient's target cell to replace a defective gene. Nucleic acids are embedded within the adeno-associated virus (AAVs) vectors; however, preexisting immunity to AAVs remains a significant concern that impairs their clinical application. Extracellular vesicles (EVs) hold great potential for therapeutic applications as vectors of nucleic acids due to their endogenous intercellular communication functions through their cargo delivery, including lipids and proteins. So far, small RNAs (siRNA and micro (mi)RNA) have been mainly loaded into EVs to treat several diseases, but the potential use of EVs to load and deliver exogenous plasmid DNA has not been thoroughly described. This review provides a comprehensive overview of the principal methodologies currently employed to load foreign genetic material into EVs, highlighting the need to find the most effective strategies for their successful clinical translations.

Membrane interactions in drug delivery: Model cell membranes and orthogonal techniques

To generate the desired effect in the human body, the active pharmaceutical ingredient usually needs to interact with a receptor located on the cell membrane or inside the cell. Thus, understanding membrane interactions is of great importance when it comes to the development and testing of new drug molecules or new drug delivery systems. Nowadays, there is a tremendous selection of both model cell membranes and of techniques that can be used to characterize interactions between selected model cell membranes and a drug molecule, an excipient, or a drug delivery system. Having such a wide selection of model cell membranes and techniques available makes it sometimes challenging to select the optimal combination for a specific study. Furthermore, it is difficult to compare results obtained using different model cell membranes and techniques, and not all in vitro studies translate as well to an estimation of the in vivo biological activity or understanding of mode of action. This review provides an overview of the available lipid bilayer-based model cell membranes and of the most widely employed techniques for studying membrane interactions. Finally, the need for employing complimentary characterization techniques in order to acquire more reliable and in-depth information is highlighted.

Double-mode relaxation of highly deformed anisotropic vesicles

Lipid vesicles are known to undergo complex conformational transitions, but it remains challenging to systematically characterize nonequilibrium membrane dynamics in flow. Here, we report the direct observation of anisotropic vesicle relaxation from highly deformed shapes using a Stokes trap. Vesicle shape relaxation is described by two distinct characteristic timescales governed by the bending modulus and membrane tension. Interestingly, the fast double-mode timescale is found to depend on vesicle deflation or reduced volume. Experimental results are well described by a viscoelastic model of a deformed membrane. Overall, these results show that vesicle relaxation is governed by an interplay between membrane elastic moduli, surface tension, and vesicle deflation.

Artificial Biosystems by Printing Biology

The continuous progress of printing technologies over the past 20 years has fueled the development of a plethora of applications in materials sciences, flexible electronics, and biotechnologies. More recently, printing methodologies have started up to explore the world of Artificial Biology, offering new paradigms in the direct assembly of Artificial Biosystems (small condensates, compartments, networks, tissues, and organs) by mimicking the result of the evolution of living systems and also by redesigning natural biological systems, taking inspiration from them. This recent progress is reported in terms of a new field here defined as Printing Biology, resulting from the intersection between the field of printing and the bottom up Synthetic Biology. Printing Biology explores new approaches for the reconfigurable assembly of designed life-like or life-inspired structures. This work presents this emerging field, highlighting its main features, i.e., printing methodologies (from 2D to 3D), molecular ink properties, deposition mechanisms, and finally the applications and future challenges. Printing Biology is expected to show a growing impact on the development of biotechnology and life-inspired fabrication.

Physicochemical and biopharmaceutical characterization of novel Matrix-Liposomes

Matrix-Liposomes (MLs) are a very promising solid oral drug delivery system; however, data on their interaction with biological membranes are not available. Here, we describe the quality of MLs manufactured by dual centrifugation. MLs were prepared with a Z-average range of 139 to 160 nm and a PDI of 0.18 to 0.25. To investigate the effect of MLs on intestinal tissue (with and without mucolytic treatment), we then established an ex vivo rat intestine model. The integrity of the epithelial membranes of rat intestine was not affected by the incubation with MLs without or with pre-mucolytic treatment. Tissue samples were also analysed for changes in P-glycoprotein (P-gp) expression and function. The net secretion of the P-gp substrate Rh123 across the rat duodenum was increased in the presence of MLs. To summarize, MLs do not affect intestinal epithelial integrity, although they impact Rh123 secretion. In future, these novel MLs have to be further evaluated for proficient intestinal drug delivery.

Deformation Dynamics of Giant Unilamellar Vesicles in the Large Surface-to-Volume Ratio Regime: The Emergence of Neuron-like Morphology

Deformation of liposomes, or lipid vesicles, has been investigated extensively in terms of the thermodynamic equilibrium of the bending energy of the lipid bilayer membrane. However, the range of such deformation in previous literature has been limited within the moderate surface-to-volume ratio of the vesicles, in which axisymmetric shapes are dominant. Here, we show that neuron-like morphology, in which many lipid tubes extend radially from the mother vesicle, becomes dominant upon the slow osmotic shrinkage of giant unilamellar vesicles (GUVs) initially larger than several tens of micrometers. We show that, in the time-lapse confocal imaging, the emergence of lipid tubes is initiated from the instability that appeared along the annular rim of the flat stomatocyte shape. Since these deformation dynamics into the neuron-like morphology resemble that of the milk-crown formation in liquid splashing, we discuss that the Rayleigh-Plateau capillary instability drives this transformation into a nonaxisymmetric shape.

Hybrid Unilamellar Vesicles of Phospholipids and Block Copolymers with Crystalline Domains

Phospholipid (PL) membranes are ubiquitous in nature and their phase behavior has been extensively studied. Lipids assemble in a variety of structures and external stimuli can activate a quick switch between them. Amphiphilic block copolymers (BCPs) can self-organize in analogous structures but are mechanically more robust and transformations are considerably slower. The combination of PL dynamical behavior with BCP chemical richness could lead to new materials for applications in bioinspired separation membranes and drug delivery. It is timely to underpin the phase behavior of these hybrid systems and a few recent studies have revealed that PL-BCP membranes display synergistic structural, phase-separation, and dynamical properties not seen in pure components. One example is phase-separation in the membrane plane, which seems to be strongly affected by the ability of the PL to form lamellar phases with ordered alkyl chains. In this paper we focus on a rather less explored design handle which is the crystalline properties of the BCP component. Using a combination of confocal laser scanning microscopy and X-ray scattering we show that hybrid membranes of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and methoxy-poly(ethylene glycol)-b-poly(ε-caprolactone) (mPEG-b-PCL) display BCP-rich and PL-rich domains when the BCP comprises crystalline moieties. The packing of the hydrophilic part of the BCP (PEG) favors mixing of DPPC at the molecular level or into nanoscale domains while semi-crystalline and hydrophobic PCL moieties bolster microscopic domain formation in the hybrid membrane plane.

A Multiparametric Fluorescence Probe to Understand the Physicochemical Properties of Small Unilamellar Lipid Vesicles in Poly(ethylene glycol)-Water Medium

FDAPT (2-formyl-5-(4'-N,N-dimethylaminophenyl)thiophene) efficiently senses the minimum alteration of lipid bilayer microenvironment with all six different fluorescence parameters namely emission wavelength, fluorescence intensity, steady-state anisotropy, and their corresponding time-dependent parameters (Sahu et al., J. Phys. Chem. B 2018, 122, 7308-7318). In the present work, the effect of poly(ethylene glycol) on the small unilamellar vesicle is demonstrated with the emission behavior of the FDAPT probe. A medium and a high molecular weight PEG were chosen to perturb the lipid vesicles. The alteration of the bilayer polarity, water content inside bilayer, lipid packing density in the perturbed vesicles reflect significant changes in different fluorescence parameters of FDAPT probe. The effect of PEG on the unilamellar vesicle was rationalized with the alteration of the emission behavior, fluorescence lifetime, steady-state anisotropy and anisotropy decay of the probe. The simple and convenient fluorescence measurements provide new insights into the effect of PEG on the packing density, water volume, micro polarity, and microviscosity of the small unilamellar vesicle. The physiological understanding was extended to rationalize the cryoprotecting behavior of PEG.

A Dual Functional Nanoreactor for Synergistic Starvation and Photodynamic Therapy

The combination of photodynamic therapy (PDT) and enzyme therapy is a highly desirable approach in malignant tumor therapies as it takes advantage of the spatial-controlled PDT and the effective enzyme-catalyzed bioreactions. However, it is a challenge to co-encapsulate hydrophilic enzymes and hydrophobic photosensitizers, and these two agents often interfere with each other. In this work, a protocell-like nanoreactor (GOx-MSN@MnPc-LP) has been designed for synergistic starvation therapy and PDT. In this nanoreactor, the hydrophilic glucose oxidase (GOx) is loaded in the pore of mesoporous silica nanoparticles (MSNs), while the hydrophobic manganese phthaleincyanide (MnPc) is loaded in the membrane layer of liposome. This spatial separation of two payloads protects GOx and MnPc from the cellular environment and avoids interference with each other. GOx catalyzes the oxidation of glucose, which generates hydrogen peroxide and gluconic acid, leading to the starvation therapy via glucose consumption in cancer cells, as well as the disruption of cellular redox balance. MnPc produces cytotoxic singlet oxygen under 730 nm laser irradiation, achieving PDT. The antitumor effects of the nanoreactor have been verified on tumor cells and tumor-bearing mice models. GOx-MSN@MnPc-LP efficiently inhibits tumor growth in vivo with a single treatment, indicating the robust synergy of starvation therapy and PDT treatment. This work also offers a versatile strategy for delivering hydrophilic enzymes and hydrophobic photosensitizers using a protocell-like nanoreactor for effective cancer treatment.

Distance-based paper device using polydiacetylene liposome as a chromogenic substance for rapid and in-field analysis of quaternary ammonium compounds

This work presents an affordable distance-based microfluidic paper-based device (μPAD), using polydiacetylene (PDA) liposome as a chromogenic substance with a smartphone-based photo editor, for rapid and in-field analysis of quaternary ammonium compounds (QACs) (e.g., didecyldimethylammonium chloride (DDAC), benzyldimethyltetradecyl ammonium chloride (BAC), and cetylpyridinium chloride (CPC)). In-field analysis of these compounds is important to ensure their antimicrobial activity and user safety since they are widely utilized as disinfectants in households and hospitals. The μPAD featured a thermometer-like shape consisting of a sample reservoir and a microchannel as the detection zone, which was pre-deposited with PDA liposome. The color change from blue to red appeared in the presence of QACs and the color bar lengths were proportional to the QAC concentrations. Reactions of QACs with the PDA required a specific pH range (from pH 4.0 to 10.0) and a readout time of 7 min. Analytical performance characteristics of the device were tested with DDAC, BAC, and CPC showing acceptable specificity, accuracy (96.1-109.4%), and precision (%RSDs ≤ 9.3%). Limits of detection and quantitation were in the ranges of 20 to 80 and 70 to 250 μM, respectively. Feasibility of the newly developed device was demonstrated for in-field analysis of QACs in fumigation solution providing comparable results with those obtained from a colorimetric assay (P > 0.05). The proposed device shows potentials for further applications of other analytes since it offers speed, simplicity, and affordability for in-field analysis, especially in remote areas where expertise, resources, and infrastructures are limited. Graphical abstract.

Systemic Review of Biodegradable Nanomaterials in Nanomedicine

BACKGROUND

Nanomedicine is a field of science that uses nanoscale materials for the diagnosis and treatment of human disease. It has emerged as an important aspect of the therapeutics, but at the same time, also raises concerns regarding the safety of the nanomaterials involved. Recent applications of functionalized biodegradable nanomaterials have significantly improved the safety profile of nanomedicine.

OBJECTIVE

Our goal is to evaluate different types of biodegradable nanomaterials that have been functionalized for their biomedical applications.

METHOD

In this review, we used PubMed as our literature source and selected recently published studies on biodegradable nanomaterials and their applications in nanomedicine.

RESULTS

We found that biodegradable polymers are commonly functionalized for various purposes. Their property of being naturally degraded under biological conditions allows these biodegradable nanomaterials to be used for many biomedical purposes, including bio-imaging, targeted drug delivery, implantation and tissue engineering. The degradability of these nanoparticles can be utilized to control cargo release, by allowing efficient degradation of the nanomaterials at the target site while maintaining nanoparticle integrity at off-target sites.

CONCLUSION

While each biodegradable nanomaterial has its advantages and disadvantages, with careful design and functionalization, biodegradable nanoparticles hold great future in nanomedicine.

Potential application of liposomal nanodevices for non-cancer diseases: an update on design, characterization and biopharmaceutical evaluation

Liposomes, lipid-based vesicular systems, have attracted major interest as a means to improve drug delivery to various organs and tissues in the human body. Recent literature highlights the benefits of liposomes for use as drug delivery systems, including encapsulating of both hydrophobic and hydrophilic cargos, passive and active targeting, enhanced drug bioavailability and therapeutic effects, reduced systemic side effects, improved cargo penetration into the target tissue and triggered contents release. Pioneering work of liposomes researchers led to introduction of long-circulating, ligand-targeted and triggered release liposomes, as well as, liposomes containing nucleic acids and vesicles containing combination of cargos. Altogether, these findings have led to widespread application of liposomes in a plethora of areas from cancer to conditions such as cardiovascular, neurologic, respiratory, skin, autoimmune and eye disorders. There are numerous review articles on the application of liposomes in treatment of cancer, which seems the primary focus, whereas other diseases also benefit from liposome-mediated treatments. Therefore, this article provides an illustrated detailed overview of liposomal formulations, in vitro characterization and their applications in different disorders other than cancer. Challenges and future directions, which must be considered to obtain the most benefit from applications of liposomes in these disorders, are discussed.

Magnetosomes for bioassays by merging fluorescent liposomes and magnetic nanoparticles: encapsulation and bilayer insertion strategies

Magnetized liposome (magnetosomes) labels can overcome diffusion limitations in bioassays through fast and easy magnetic attraction. Our aim therefore was to advance the understanding of factors influencing their synthesis focusing on encapsulation strategies and synthesis parameters. Magnetosome synthesis is governed by the surface chemistry and the size of the magnetic nanoparticles used. We therefore studied the two possible magnetic labelling strategies, which are the incorporation of small, hydrophobic magnetic nanoparticles (MNPs) into the bilayer core (b-liposomes) and the entrapment of larger hydrophilic MNPs into the liposomes' inner cavity (i-liposomes). Furthermore, they were optimized and compared for application in a DNA bioassay. The major obstacles observed for each of these strategies were on the one hand the need for highly concentrated hydrophilic MNPs, which is limited by their colloidal stability and costs, and on the other hand the balancing of magnetic strength vs. size for the hydrophobic MNPs. In the end, both strategies yielded magnetosomes with good performance, which improved the limit of detection of a non-magnetic DNA hybridization assay by a factor of 3-8-fold. Here, i-liposomes with a magnetization yield of 5% could be further improved through a simple magnetic pre-concentration step and provided in the end an 8-fold improvement of the limit of detection compared with non-magnetic conditions. In the case of b-liposomes, Janus-like particles were generated during the synthesis and yielded a fraction of 15% magnetosomes directly. Surprisingly, further magnetic pre-concentration did not improve their bioassay performance. It is thus assumed that magnetosomes pull normal liposomes through the magnetic field towards the surface and the presence of more magnetosomes is not needed. The overall stability of magnetosomes during storage and magnetic action, their superior bioassay performance, and their adaptability towards size and surface chemistry of MNPs makes them highly valuable signal enhancers in bioanalysis and potential tools for bioseparations. Graphical abstract.

Epidermal Delivery of Retinyl Palmitate Loaded Transfersomes: Penetration and Biodistribution Studies

The alteration of retinoids levels in the skin can cause different disorders in the maturation of epithelial skin cells. Topical administration of these lipophilic molecules is a challenge that can be addressed by encapsulation into drug delivery systems. In this study, retinyl palmitate transferosomes formulated in cream were developed and the increases in the penetration of the active ingredients as well as the biodistribution were evaluated in vitro and in vivo. Transfersomes demonstrated a significant increase in the administration of retinyl palmitate to the epidermis by quantification of the active ingredients in the different layers of the skin, as well as by fluorescence microscopy of biopsies of non-dermatomized pig-ear skin. These results suggest that transfersomes may be an efficient vehicle for the delivery of retinoids to inner layers of the skin, such as the epidermis.