Simultaneous and sensitive determination of ascorbic acid, dopamine and uric acid via an electrochemical sensor based on PVP-graphene composite

Synchronous electrochemical detection of dopamine and uric acid by a PMo12@MIL-100(Fe)@PVP nanocomposite

In this work, a noble-metal-free composite electrode was prepared based on PMo₁₂O₄₀^3- (PMo₁₂), C₉H₅FeO₇ (MIL-100(Fe), a Fe-based metal organic framework) and polyvinylpyrrolidone (PVP), and served as a high performance electrochemical sensor for synchronous detection of dopamine (DA) and uric acid (UA). The PMo₁₂@MIL-100(Fe)@PVP composite electrode was fabricated by a in-situ hydrothermal method. Thanks to the synergistic effect of three active components (PMo₁₂, MIL-100 and PVP), the electrode possesses large specific surface area and high electrical conductivity and therefore it shows high electrocatalytic oxidation performance of DA and UA with a spacing of 0.146 V between the two peak positions. These benefits of the electrode enable its electrochemical sensor to synchronously detect of DA and UA. Namely, the linear ranges can achieve 1-247 μM for DA and 5-406 μM for UA. Meanwhile, the detection limits are 0.586 μM for DA and 0.372 μM for UA. Moreover, the sensor can be applied to simultaneous determination of UA and DA in human serums with satisfactory recovery values.

A Micro Electrochemical Sensor for Multi-Analyte Detection Based on Oxygenated Graphene Modified Screen-Printed Electrode

Electrode interfaces with both antibiofouling properties and electrocatalytic activity can promote the practical application of nonenzymatic electrochemical sensors in biological fluids. Compared with graphene, graphene oxide (GO) possesses unique properties such as superior solubility (hydrophilicity) in water, negative charge, and abundant oxygenated groups (oxo functionalities) in the plane and edge sites, which play an essential role in electrocatalysis and functionalization. In this work, a micro electrochemical sensor consisting of GO-modified screen-printed electrode and PDMS micro-cell was designed to achieve multi-analyte detection with excellent selectivity and anti-biofouling properties by electrochemically tuning the oxygen-containing functional species, hydrophilicity/hydrophobicity, and electrical conductivity. In particular, the presented electrodes demonstrated the potential in the analysis of biological samples in which electrodes often suffer from serious biofouling. The interaction of proteins with electrodes as well as uric acid was investigated and discussed.

A portable ascorbic acid in sweat analysis system based on highly crystalline conductive nickel-based metal-organic framework (Ni-MOF)

Conductive metal-organic frameworks can provide unique porous structures, large pore volumes, many catalytically active sites and high crystallinity, and so are becoming increasingly important and attractive as electrocatalytic materials. The present work synthesized nanorods of the conductive compound Ni₃(2,3,6,7,10,11-hexaiminotriphenylene)₂ (Ni₃(HITP)₂) with a high degree of crystallinity from HITP ligands and Ni²⁺ ions. Screen-printed electrodes made with this material were employed to fabricate an enzyme-free sensor for the detection of ascorbic acid (AA). The sensor exhibited good catalytic activity during the electrocatalytic analysis of AA in alkaline media, attributed to the synergistic effect of highly active Ni-N₄ catalytic sites in the nanorods, the two-dimensional superimposed honeycomb lattice of the Ni₃(HITP)₂, and the large specific surface area of this material. The latter property facilitated efficient electron transfer during catalytic oxidation. A portable electrochemical AA detection system was developed using Ni₃(HITP)₂ as the electrode material together with application-specific integrated circuits and a smartphone application with App. Good sensing performance was obtained, including a wide linear range (2-200 μM) with high sensitivity (0.814 μA μM^-1 cm^-2), and low detection limit (1 μM). This system can be used to monitor AA levels and trends in sweat to assess vitamin C intake as a part of personal health management.

Electrochemical Detection of Ascorbic Acid in Oranges at MWCNT-AONP Nanocomposite Fabricated Electrode

Ascorbic acid (AA) is an essential vitamin in the body, influencing collagen formation, as well as norepinephrine, folic acids, tryptophan, tyrosine, lysine, and neuronal hormone metabolism. This work reports on electrochemical detection of ascorbic acid (AA) in oranges using screen-print carbon electrodes (SPCEs) fabricated with multi-walled carbon nanotube- antimony oxide nanoparticle (MWCNT-AONP) nanocomposite. The nanocomposite-modified electrode displayed enhanced electron transfer and a better electrocatalytic reaction towards AA compared to other fabricated electrodes. The current response at the nanocomposite-modified electrode was four times bigger than the bare electrode. The sensitivity and limit of detection (LOD) at the nanocomposite modified electrode was 0.3663 [AA]/µM and 140 nM, respectively, with linearity from 0.16–0.640 μM and regression value R² = 0.985, using square wave voltammetry (SWV) for AA detection. Two well-separated oxidation peaks were observed in a mixed system containing AA and serotonin (5-HT); and the sensitivity and LOD were 0.0224 [AA]/µA, and 5.85 µΜ, respectively, with a concentration range from 23 to 100 µM (R² = 0.9969) for AA detection. The proposed sensor outperformed other AA sensors reported in the literature. The fabricated electrode showed great applicability with excellent recoveries ranging from 99 to 107 %, with a mean relative standard deviation (RSD) value of 3.52 % (n = 3) towards detecting AA in fresh oranges.

Tryptophan-sorbitol based carbon quantum dots for theranostics against hepatocellular carcinoma

Background

Despite novel advances in screening, targeting and immunotherapies, early diagnosis and satisfactory treatments against hepatocellular carcinoma (HCC) remain formidable challenges. Given the unique advantages, carbon quantum dots (CQDs) become a smart theranostic nanomaterial for cancer diagnosis and therapy.

Results

In this work, a type of bio-friendly CQDs, trichrome-tryptophan-sorbitol CQDs (TC-WS-CQDs), is synthesized from natural biocompatible tryptophan via the one-pot hydrothermal method. Compared with normal hepatocytes, a much stronger green fluorescence is detected in HCC cells, indicating the ability of TC-WS-CQDs to target HCC cells. Furthermore, green-emitting TC-WS-CQDs generate large amounts of reactive oxygen species (ROS), leading to autophagy of HCC cells. Additionally, the green-emitting TC-WS-CQDs perform significant tumor inhibition by inducing autophagy via p53-AMPK pathway in vitro and in vivo studies with almost no systemic toxicity.

Conclusions

The results may highlight a promising anticancer nanotheranostic strategy with integration of diagnosis, targeting, and therapy.

Graphical Abstract

Bottom-Up Evolution of Diamond-Graphite Hybrid Two-Dimensional Nanostructure: Underlying Picture and Electrochemical Activity

The diamond-graphite hybrid thin film with low-dimensional nanostructure (e.g., nitrogen-included ultrananocrystalline diamond (N-UNCD) or the alike), has been employed in many impactful breakthrough applications. However, the detailed picture behind the bottom-up evolution of such intriguing carbon nanostructure is far from clarified yet. Here, the authors clarify it, through the concerted efforts of microscopic, physical, and electrochemical analyses for a series of samples synthesized by hot-filament chemical vapor deposition using methane-hydrogen precursor gas, based on the hydrogen-dependent surface reconstruction of nanodiamond and on the substrate-temperature-dependent variation of the growth species (atomic hydrogen and methyl radical) concentration near substrate. The clarified picture provides insights for a drastic enhancement in the electrochemical activities of the hybrid thin film, concerning the detection of important biomolecule, that is, ascorbic acid, uric acid, and dopamine: their limits of detections are 490, 35, and 25 nm, respectively, which are among the best of the all-carbon thin film electrodes in the literature. This work also enables a simple and effective way of strongly enhancing AA detection.

Novel lanthanum vanadate-based nanocomposite for simultaneously electrochemical detection of dopamine and uric acid in fetal bovine serum

The abnormal levels of two biological molecules, dopamine (DA) and Uric acid (UA), in human body are symptoms of diseases such as Parkinson's disease and arrhythmia. A novel lanthanum vanadate and multi-walled carbon nanotubes (LaV-MWCNTs) composite modified glassy carbon electrode (GCE) was developed and utilized as an efficient electrochemical sensor for the simultaneous detection of DA and UA. LaV-MWCNTs composite was successfully fabricated by a facile ultrasonic self-assembly method and identified by means of a series of successive measurements including XPS, XRD, FT-IR and FE-SEM. The LaV-MWCNTs modified GCE shows the concentration linear ranges of DA and UA are 2-100 μΜ using DPV. The limits of detection (LODs; signal-to-noise ratio of 3, S/N = 3) of the LaV-MWCNTs modified GCE sensor for DA and UA were calculated to be 0.046 μM and 0.025 μM, respectively. The feasibility of using the LaV-MWCNTs modified GCE sensor to detect DA and UA in a typical biological fluid, fetal bovine serum, was also evaluated by the standard addition method.

Extracellular matrix-degrading STING nanoagonists for mild NIR-II photothermal-augmented chemodynamic-immunotherapy

Regulation of stimulator of interferon genes (STING) pathway using agonists can boost antitumor immunity for cancer treatment, while the rapid plasma clearance, limited membrane permeability, and inefficient cytosolic transport of STING agonists greatly compromise their therapeutic efficacy. In this study, we describe an extracellular matrix (ECM)-degrading nanoagonist (dNAc) with second near-infrared (NIR-II) light controlled activation of intracellular STING pathway for mild photothermal-augmented chemodynamic-immunotherapy of breast cancer. The dNAc consists of a thermal-responsive liposome inside loading with ferrous sulfide (FeS₂) nanoparticles as both NIR-II photothermal converters and Fenton catalysts, 2′3′-cyclic guanosine monophosphate-adenosine monophosphate (cGAMP) as the STING agonist, and an ECM-degrading enzyme (bromelain) on the liposome surface. Mild heat generated by dNAc upon NIR-II photoirradiation improves Fenton reaction efficacy to kill tumor cells and cause immunogenic cell death (ICD). Meanwhile, the generated heat triggers a controlled release of cGAMP from thermal-responsive liposomes to active STING pathway. The mild photothermal activation of STING pathway combined with ICD promotes anti-tumor immune responses, which leads to improved infiltration of effector T cells into tumor tissues after bromelain-mediated ECM degradation. As a result, after treatment with dNAc upon NIR-II photoactivation, both primary and distant tumors in a murine mouse model are inhibited and the liver and lung metastasis are effectively suppressed. This work presents a photoactivatable system for STING pathway and combinational immunotherapy with improved therapeutic outcome.

Electrocatalytic Properties of a BaTiO3/MWCNT Composite for Citric Acid Detection

Although barium titanate (BaTiO3) shows prominent dielectric properties for fabricating electronic devices, its utilization in electrochemical applications is limited. Thus, this study examined the potential of a BaTiO3-based composite in the detection of a food additive, i.e., citric acid. First, a submicron-scale BaTiO3 powder was synthesized using the solution combustion method. Then, a BaTiO3/multiwalled carbon nanotube (MWCNT) composite was hydrothermally synthesized at BaTiO3:MWCNT mass ratios of 1:1 and 2:1. This composite was used as a working electrode in a nonenzymatic sensor to evaluate its electrocatalytic activity. Cyclic voltammetric measurements revealed that the BaTiO3/MWCNT composite (2:1) exhibited the highest electrocatalytic activity. Reduction reactions were observed at applied voltages of approximately 0.02 and −0.67 V, whereas oxidation reactions were detected at −0.65 and 0.47 V. With acceptable sensitivity, decent selectivity, and fair stability, the BaTiO3/MWCNT composite (2:1) showed good potential for citric acid detection.

An Electrochemical Sensor Based on a Nitrogen-Doped Carbon Material and PEI Composites for Sensitive Detection of 4-Nitrophenol

A glassy carbon electrode (GCE) was modified with nitrogen-doped carbon materials (NC) and polyethyleneimine (PEI) composites to design an electrochemical sensor for detecting 4-nitrophenol (4-NP). The NC materials were prepared by a simple and economical method through the condensation and carbonization of formamide. The NC materials were dispersed in a polyethyleneimine (PEI) solution easily. Due to the excellent properties of NC and PEI as well as their synergistic effect, the electrochemical reduction of the 4-NP on the surface of the NC-PEI composite modified electrode was effectively enhanced. Under the optimized conditions, at 0.06-10 μM and 10-100 μM concentration ranges, the NC-PEI/GCE sensor shows a linear response to 4-NP, and the detection limit is 0.01 μM (the signal-to-noise ratio is three). The reliability of the sensor for the detection of 4-NP in environmental water samples was successfully evaluated. In addition, the sensor has many advantages, including simple preparation, fast response, high sensitivity and good repeatability. It may be helpful for potential applications in detecting other targets.

Promising Graphene-Based Nanomaterials and Their Biomedical Applications and Potential Risks: A Comprehensive Review

Graphene-based nanomaterials (GBNs) have been the subject of research focus in the scientific community because of their excellent physical, chemical, electrical, mechanical, thermal, and optical properties. Several studies have been conducted on GBNs, and they have provided a detailed review and summary of various applications. However, comprehensive comments on biomedical applications and potential risks and strategies to reduce toxicity are limited. In this review, we systematically summarized the following aspects of GBNs in order to fill the gaps: (1) the history, synthesis methods, structural characteristics, and surface modification; (2) the latest advances in biomedical applications (including drug/gene delivery, biosensors, bioimaging, tissue engineering, phototherapy, and antibacterial activity); and (3) biocompatibility, potential risks (toxicity in vivo/vitro and effects on human health and the environment), and strategies to reduce toxicity. Moreover, we have analyzed the challenges to be overcome in order to enhance application of GBNs in the biomedical field.

Materials Approaches for Improving Electrochemical Sensor Performance

Electrochemical sensors have emerged as important diagnostic tools in recent years, due to their simplicity and ease of use. Compared to instrumental analysis methods that use complicated experimental and data analysis techniques─such as mass spectrometry, nuclear magnetic resonance (NMR), spectrophotometric methods, and chromatography─electrochemical sensors show promise for use in a wide range of real-time and in situ applications such as pharmaceutical testing, environmental monitoring, and medical diagnostics. In order to identify analytes in complex and/or biological samples, materials used for both the electrode materials and the chemically selective layer have been evolving throughout the years for optimizing the analytical performance of electrochemical sensors to increase sensitivity, selectivity and linear range. In this Perspective, attention will be focused on different types of materials that have been used for electrochemical sensing, including new combinations of well-studied materials as well as novel strategies to enhance the performance of sensing devices. The Perspective will also discuss existing challenges in the field and future strategies for addressing those challenges.

Selective Voltammetric Detection of Ascorbic Acid from Rosa Canina on a Modified Graphene Oxide Paste Electrode by a Manganese(II) Complex

Voltammetric techniques have been considered as an important analytical tool applied to the determination of trace concentrations of many biological molecules including ascorbic acid. In this paper, ascorbic acid was detected by square wave voltammetry, using graphene oxide paste as a working electrode, modified by a film of a manganese(II) complex compound. Various factors, such as the effect of pH, affecting the response characteristics of the modified electrode were investigated. The relationship between the peak height and ascorbic acid concentration within the modified working electrode was investigated, using the calibration graph. The equation of the calibration graph was found to be: I = 0.0550γac + 0.155 with R2 = 0.9998, where I is the SWV current and γac is the mass concentration of ascorbic acid. The LOD and LOQ of the proposed method were determined to be 1.288 μg/L and 3.903 μg/L, respectively. Several compounds, such as riboflavin, biotin, and ions, such as Fe and Cu, were tested and it seemed that they did not interfere with the analytic signal. The proposed procedure was successfully applied in the determination of ascorbic acid in Rosa canina hips.

Gold Nanoparticles/Carbon Nanotubes and Gold Nanoporous as Novel Electrochemical Platforms for L-Ascorbic Acid Detection: Comparative Performance and Application

Herein, the effects of nanostructured modifications of a gold electrode surface in the development of electrochemical sensors for L-ascorbic acid detection have been investigated. In particular, a bare gold electrode has been modified by electrodeposition of gold single-walled carbon nanotubes (Au/SWCNTs) and by the formation of a highly nanoporous gold (h-nPG) film. The procedure has been realized by sweeping the potential between +0.8 V and 0 V vs. Ag/AgCl for 25 scans in a suspension containing 5 mg/mL of SWCNTs in 10 mM HAuCl4 and 2.5 M NH4Cl solution for Au/SWCNTs modified gold electrode. A similar procedure was applied for a h-nPG electrode in a 10 mM HAuCl4 solution containing 2.5 M NH4Cl, followed by applying a fixed potential of −4 V vs. Ag/AgCl for 60 s. Cyclic voltammetry and electrochemical impedance spectroscopy were used to characterize the properties of the modified electrodes. The developed sensors showed strong electrocatalytic activity towards ascorbic acid oxidation with enhanced sensitivities of 1.7 × 10−2 μA μM−1cm−2 and 2.5 × 10−2 μA μM−1cm−2 for Au/SWCNTs and h-nPG modified electrode, respectively, compared to bare gold electrode (1.0 × 10−2 μA μM−1cm−2). The detection limits were estimated to be 3.1 and 1.8 μM, respectively. The h-nPG electrode was successfully used to determine ascorbic acid in human urine with no significant interference and with satisfactory recovery levels.

A novel metal organic gel with superior oxidase-like activity for efficient and sensitive chemiluminescence detection of uric acid

It is found that MIL-100(Fe) gels, as a kind of metal-organic gels (MOGs), constitutting of iron (Fe³⁺) and trimesic acid (H₃BTC), has been regarded as the efficient catalyst of luminol chemiluminescence (CL) system without the presence of extra oxidants in the present work. MIL-100(Fe) gels that have possessed mimicking oxidase-like activity can excellently enhanced luminol CL intensity by accelerating the generation of reactive oxygen species. Furthermore, with the addition of uric acid (UA), the CL signal has been dramatically inhibited under alkaline condition. Hence, the CL intensity inhibiting ratio (I₀/I_S) was proportional to the increasing concentration of UA in the rang from 10 nM to 4000 nM with the detection limit of 5.9 nM. This method has been successfully applied for analysis of UA with acceptable recoveries ranging from 97.0% to 107.9% in urine sample. These results indicates that this study open up a novel, sensitive and convenient method to detect UA in biological samples.

Highly Sensitive Detection and Differentiation of Endotoxins Derived from Bacterial Pathogens by Surface-Enhanced Raman Scattering

Bacterial endotoxins, as major components of Gram-negative bacterial outer membrane leaflets and a well-characterized TLR4-MD-2 ligand, are lipopolysaccharides (LPSs) that are constantly shed from bacteria during growth and infection. For the first time, we report that unique surface-enhanced Raman scattering (SERS) spectra of enteric LPSs from E. coli, S. typhimurium, S. minnesota, V. cholerae, Rhizobium species R. CE3, and R. NGR, as well as Neisseria meningitidis endotoxin structures, LPSs, lipid A, and KDO2-lipid A can be obtained. The characteristic peaks of the SERS spectra reveal that most of the tested LPS structures are from lipids and saccharides, i.e., the major components of LPSs, and these spectra can be successfully used to differentiate between endotoxins with principal components analysis. In addition, all the LPS samples here are measured at a concentration of 10 nmole/mL, which corresponds to their relevant pathophysiological concentrations in clinical infections. This study demonstrates that LPSs can be used as biomarkers for the highly sensitive detection of bacteria using SERS-based methods.

Flexible graphene/GO electrode for gel-free EEG

Objective.Developments in electroencephalography (EEG) technology have allowed the use of the brain-computer interface (BCI) outside dedicated labratories. In order to achieve long-term monitoring and detection of EEG signals for BCI application, dry electrodes with good signal quality and high bio compatibility are essential. In 2016, we proposed a flexible dry electrode made of silicone gel and Ag flakes, which showed good signal quality and mechanical robustness. However, the Ag components used in our previous design made the electrode too expensive for commercial adaptation.Approach.In this study, we developed an affordable dry electrode made of silicone gel, metal flakes and graphene/GO based on our previous design. Two types of electrodes with different graphene/GO proportions were produced to explore how the amount of graphene/GO affects the electrode.Main results.During our tests, the electrodes showed low impedance and had good signal correlation to conventional wet electrodes in both the time and frequency domains. The graphene/GO electrode also showed good signal quality in eyes-open EEG recording. We also found that the electrode with more graphene/GO had an uneven surface and worse signal quality. This suggests that adding too much graphene/GO may reduce the electrods' performance. Furthermore, we tested the proposed dry electrodes' capability in detecting steady state visually evoked potential. We found that the dry electrodes can reliably detect evoked potential changes even in the hairy occipital area.Significance.Our results showed that the proposed electrode has good signal quality and is ready for BCI applications.

Preparation of high-quality graphene oxide-carbon quantum dots composites and their application for electrochemical sensing of uric acid and ascorbic acid

Graphene oxide-quantum dots systems are emerging as a new class of materials that hold promise for biochemical sensing applications. In this paper, the eco-friendly carbon quantum dots (CQDs) are prepared with cheap and recyclable coke powders as carbon source. The graphene oxide-carbon quantum dots (GO-CQDs) composites are synthesized using graphene oxide as the conductive skeleton to load the CQDs by a one-step calcination method. The obtained GO-CQDs composites demonstrate the successful decoration of CQDs on GO nanosheets. The CQDs acting as spacers create gaps between GO sheets, resulting in a high surface area, which electively increases the electrolyte accessibility and electronic transmission. The electrocatalytic activity and reversibility of GO-CQDs composites can be effectively enhanced by tuning the mass ratio of GO to CQDs and the heating process. Furthermore, a highly sensitive and selective electrochemical sensor for determining uric acid (UA) and ascorbic acid (AA) was developed by modifying GO-CQDs composites onto a glassy carbon electrode. The results show that the linear range, minimum detection limit, and sensitivity of the GO-CQDs electrode for UA detection are 1-150 μM, 0.01 μM, and 2319.4 μA mM^-1 cm^-2, respectively, and those for AA detection are 800-9000 μM, 31.57 μM, and 53.1 μA mM^-1 cm^-2, respectively. The GO-CQDs are employed as the electrode materials for the serum and urine samples electrochemical sensing, the results indicate that the sensor can be used for the analysis of real biological samples.

Research on the fate of polymeric nanoparticles in the process of the intestinal absorption based on model nanoparticles with various characteristics: size, surface charge and pro-hydrophobics

BACKGROUND

The use of drug nanocarriers to encapsulate drugs for oral administration may become an important strategy in addressing the challenging oral absorption of some drugs. In this study-with the premise of controlling single variables-we prepared model nanoparticles with different particle sizes, surface charges, and surface hydrophobicity/hydrophilicity. The two key stages of intestinal nanoparticles (NPs) absorption-the intestinal mucus layer penetration stage and the trans-intestinal epithelial cell stage-were decoupled and analyzed. The intestinal absorption of each group of model NPs was then investigated.

RESULTS

Differences in the behavioral trends of NPs in each stage of intestinal absorption were found to result from differences in particle properties. Small size, low-magnitude negative charge, and moderate hydrophilicity helped NPs pass through the small intestinal mucus layer more easily. Once through the mucus layer, an appropriate size, positive surface charge, and hydrophobic properties helped NPs complete the process of transintestinal epithelial cell transport.

CONCLUSIONS

To achieve high drug bioavailability, the basic properties of the delivery system must be suitable for overcoming the physiological barrier of the gastrointestinal tract.

Electrochemical detection of white spot syndrome virus with a silicone rubber disposable electrode composed of graphene quantum dots and gold nanoparticle-embedded polyaniline nanowires

Background

With the enormous increment of globalization and global warming, it is expected that the number of newly evolved infectious diseases will continue to increase. To prevent damage due to these infections, the development of a diagnostic method for detecting a virus with high sensitivity in a short time is highly desired. In this study, we have developed a disposable electrode with high-sensitivity and accuracy to evaluate its performances for several target viruses.

Results

Conductive silicon rubber (CSR) was used to fabricate a disposable sensing matrix composed of nitrogen and sulfur-co-doped graphene quantum dots (N,S-GQDs) and a gold-polyaniline nanocomposite (AuNP-PAni). A specific anti-white spot syndrome virus (WSSV) antibody was conjugated to the surface of this nanocomposite, which was successfully applied for the detection of WSSV over a wide linear range of concentration from 1.45 × 10² to 1.45 × 10⁵ DNA copies/ml, with a detection limit as low as 48.4 DNA copies/ml.

Conclusion

The engineered sensor electrode can retain the detection activity up to 5 weeks, to confirm its long-term stability, required for disposable sensing applications. This is the first demonstration of the detection of WSSV by a nanofabricated sensing electrode with high sensitivity, selectivity, and stability, providing as a potential diagnostic tool to monitor WSSV in the aquaculture industry.

Detection of xanthine in food samples with an electrochemical biosensor based on PEDOT:PSS and functionalized gold nanoparticles

An innovative biosensor assembly relying on glassy carbon electrodes modified with nanocomposites consisting of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) as a host matrix with functionalized gold nanoparticles (GCE/PEDOT:PSS-AuNPs) is presented for the selective and sensitive detection of xanthine (XA). The developed sensor was successfully applied for the quantification of XA in the presence of significant interferents like hypoxanthine (HXA) and uric acid (UA). Different spectroscopy and electron microscopy analyses were done to characterize the as-prepared nanocomposite. Calibration responses for the quantification of XA was linear from 5.0 × 10⁻⁸ to 1.0 × 10⁻⁵ M (R² = 0.994), with a detection limit as low as 3.0 × 10⁻⁸ (S/N = 3). Finally, the proposed sensor was applied for the analyses of XA content in commercial fish and meat samples and satisfactory recovery percentage was obtained.

An innovative biosensor with glassy carbon electrodes modified with poly(3,4-ethylenedioxythiophene) polystyrene sulfonate nanocomposites as a host matrix with functionalized gold nanoparticles for the selective and sensitive detection of xanthine.

Nanohybrids of shuttle-like α-Fe2O3 nanoparticles and nitrogen-doped graphene for simultaneous voltammetric detection of dopamine and uric acid

Shuttle-like α-Fe₂O₃ nanoparticles and nitrogen-doped graphene nanocomposites as a low cost and efficient electrocatalyst for detecting dopamine and uric acid.

Enzyme-free detection of uric acid using hydrothermally prepared CuO·Fe2O3 nanocrystals

Copper oxide doped iron oxide nanocrystals (CuO·Fe₂O₃ NCs) were prepared using a simple hydrothermal technique at low temperature in an alkaline medium.