Fourier transform infrared imaging of human hair with a high spatial resolution without the use of a synchrotron

The Application of Infrared Chemical Imaging to the Detection and Enhancement of Latent Fingerprints: Method Optimization and Further Findings

Fourier transform infrared (FTIR) chemical imaging allows the collection of fingerprint images from backgrounds that have traditionally posed problems for conventional fingerprint detection methods. In this work, the suitability of this technique for the imaging of fingerprints on a wider range of difficult surfaces (including polymer banknotes, various types of paper, and aluminum drink cans) has been tested. For each new surface, a systematic methodology was employed to optimize settings such as spectral resolution, number of scans, and pixel aggregation in order to reduce collection time and file-size without compromising spatial resolution and the quality of the final fingerprint image. The imaging of cyanoacrylate-fumed fingerprints on polymer banknotes has been improved, with shorter collection times for larger image areas. One-month-old fingerprints on polymer banknotes have been successfully fumed and imaged. It was also found that FTIR chemical imaging gives high quality images of cyanoacrylate-fumed fingerprints on aluminum drink cans, regardless of the printed background. Although visible and UV light sources do not yield fingerprint images of the same quality on difficult, nonporous backgrounds, in many cases they can be used to locate a fingerprint prior to higher quality imaging by the FTIR technique. Attempts to acquire FTIR images of fingerprints on paper-based porous surfaces that had been treated with established reagents such as ninhydrin were all unsuccessful due to the swamping effect of the cellulose constituents of the paper.

Chemical imaging of latent fingerprint residues

In situ attenuated total reflection Fourier transform infrared (ATR-FT-IR) spectroscopic imaging has been used to obtain chemical images of fingerprints under controlled humidity and temperature. The distribution of lipid and amino acid components in the fingerprints from different donors left on the surface of the ZnSe crystal has been studied using an in situ FT-IR spectroscopic imaging approach under a controlled environment and studied as a function of time. Univariate and multivariate analyses were employed to analyze the spectroscopic dataset. Changes in the spectra of lipids with temperature and time have been detected. This information is needed to understand aging of the fingerprints. The ATR-FT-IR spectroscopic imaging offers a new and complementary means for studying the chemistry of fingerprints that are left pristine for further analysis. This study demonstrates the potential for visualizing the chemical changes of fingerprints for forensic applications by spectroscopic imaging.

Attenuated total reflection surface-enhanced infrared absorption microspectroscopy for identification of small thin layers on material surfaces

Attenuated total reflection surface-enhanced infrared absorption microspectroscopy (micro-ATR-SEIRA) was developed for the identification of sub-mm size and nm-thick layers on material surfaces by using gold island films deposited on the surface of micro-ATR crystals. A thin layer of triphenyl phosphate (TPP) on a poly(tetrafluoroethylene) (PTFE) membrane filter was used to evaluate the enhancement of the absorption bands. Three types of crystals: diamond, silicon, and germanium, were evaluated. Diamond gave the greatest enhancement with a 12 nm thick gold island film. The enhancement factor was 200 times compared to bare diamond crystal, whereas it was 10 times for germanium crystal. This variation of enhancement factor according to crystal types was presumed to be due to the morphology of the gold films on the crystals. We also obtained an enhanced ATR map over an area of approximately 2 x 6 mm for a thin layer (approximately 1 nm thick) of di-2-ethylhexylphthalate on PTFE using gold-coated hexagonal silicon micro-ATR crystals. This micro-ATR-SEIRA technique has major potential for analyzing small and thin substances on material surfaces.

Evaluation of physical properties of human hair by diffuse reflectance near-infrared spectroscopy

The objective of the present study is to develop a novel nondestructive, simple, and quick method to evaluate the friction, twist, and gloss of human hair based on near-infrared diffuse reflectance (NIR-DR) spectroscopy and chemometrics. NIR-DR spectra were measured for human hair, which was collected from eleven Japanese women (age 5-44 years), by use of an optical fiber probe. Partial least squares (PLS) regression has been applied to the NIR-DR spectra of human hair after mean centering (MC), standard normal variate (SNV), and first derivative (1d) or second derivative (2d) analysis to develop calibration models that predict the friction, twist, and gloss of human hair. We identified the most suitable wavenumber region for the evaluation of each physical property. Correlation coefficients and standard errors of calibration of the PLS calibration models for the friction, twist, and gloss of hair were calculated to be 0.96 and 0.023, 0.81 and 3.27, and 0.90 and 0.36, respectively. Thus, the calibration models have high accuracy.

Attenuated total internal reflection infrared microspectroscopic imaging using a large-radius germanium internal reflection element and a linear array detector

The number of techniques and instruments available for Fourier transform infrared (FT-IR) microspectroscopic imaging has grown significantly over the past few years. Attenuated total internal reflectance (ATR) FT-IR microspectroscopy reduces sample preparation time and has simplified the analysis of many difficult samples. FT-IR imaging has become a powerful analytical tool using either a focal plane array or a linear array detector, especially when coupled with a chemometric analysis package. The field of view of the ATR-IR microspectroscopic imaging area can be greatly increased from 300 x 300 microm to 2500 x 2500 microm using a larger internal reflection element of 12.5 mm radius instead of the typical 1.5 mm radius. This gives an area increase of 70x before aberrant effects become too great. Parameters evaluated include the change in penetration depth as a function of beam displacement, measurements of the active area, magnification factor, and change in spatial resolution over the imaging area. Drawbacks such as large file size will also be discussed. This technique has been successfully applied to the FT-IR imaging of polydimethylsiloxane foam cross-sections, latent human fingerprints, and a model inorganic mixture, which demonstrates the usefulness of the method for pharmaceuticals.

Applications of ATR-FTIR spectroscopic imaging to biomedical samples

FTIR spectroscopic imaging in ATR (Attenuated Total Reflection) mode is a powerful tool for studying biomedical samples. This paper summarises recent advances in the applications of ATR-FTIR imaging to dissolution of pharmaceutical formulations and drug release. The use of two different ATR accessories to obtain chemical images of formulations in contact with water as a function of time is demonstrated. The innovative use of the diamond ATR accessory allowed in situ imaging of tablet compaction and dissolution. ATR-FTIR imaging was also applied to obtain images of the surface of skin and the spatial distribution of protein and lipid rich domains was obtained. Chemical images of cross-section of rabbit aorta were obtained using a diamond ATR accessory and the possibility of in situ imaging of arterial samples in contact with aqueous solution was demonstrated for the first time. This experiment opens an opportunity to image arterial samples in contact with solutions containing drug molecules. This approach may help in understanding the mechanisms of treatment of atherosclerosis.

Chemical imaging of biological tissue with synchrotron infrared light

Fourier transform infrared micro-spectroscopy (FTIRM) and imaging (FTIRI) have become valuable techniques for examining the chemical makeup of biological materials by probing their vibrational motions on a microscopic scale. Synchrotron infrared (S-IR) light is an ideal source for FTIRM and FTIRI due to the combination of its high brightness (i.e., flux density), also called brilliance, and broadband nature. Through a 10-microm pinhole, the brightness of a synchrotron source is 100-1000 times higher than a conventional thermal (globar) source. Accordingly, the improvement in spatial resolution and in spectral quality to the diffraction limit has led to a plethora of applications that is just being realized. In this review, we describe the development of synchrotron-based FTIRM, illustrate its advantages in many applications to biological systems, and propose some potential future directions for the technique.

Detection of trace materials with Fourier transform infrared spectroscopy using a multi-channel detector

FTIR spectroscopy is one of the most powerful methods for material characterization. However, the sensitivity of this analytical tool is often very limited especially for materials with weak infrared absorption or when spectral bands of the targeted trace material overlap with the spectral bands of major components. Fortunately, for heterogeneous samples, there is an opportunity to improve the sensitivity of detection by using an imaging approach. This paper explores the opportunity of enhancing the sensitivity of FTIR spectroscopy to detect trace amounts of materials using the FTIR imaging approach based on a focal plane array (FPA) detector. Model sample tablets of ibuprofen in hydroxypropyl methylcellulose (HPMC) have been used to exemplify the detection limits of FTIR spectroscopy using: (a) a conventional mercury cadmium telluride (MCT) detector and (b) a FPA detector. The sensitivity level was compared and it has been found that for this particular set of samples, the lowest concentration of ibuprofen in HPMC that can be detected using attenuated total reflection (ATR) measuring mode with the single element MCT detector was 0.35 wt% while using the FPA detector, the presence of drug has been detected in a sample that contains as little as 0.075 wt% of drug. The application of using this enhanced sensitivity offered by the multi-channel detector to probe trace amounts of drug particles left on the surface of a finger after handling a small amount of the drug has also been demonstrated. These results have broad implications for forensic, biomedical and pharmaceutical research.