Control of phage Bxb1 excision by a novel recombination directionality factor

Memory and Combinatorial Logic Based on DNA Inversions: Dynamics and Evolutionary Stability

Genetic memory can be implemented using enzymes that catalyze DNA inversions, where each orientation corresponds to a "bit". Here, we use two DNA invertases (FimE and HbiF) that reorient DNA irreversibly between two states with opposite directionality. First, we construct memory that is set by FimE and reset by HbiF. Next, we build a NOT gate where the input promoter drives FimE and in the absence of signal the reverse state is maintained by the constitutive expression of HbiF. The gate requires ∼3 h to turn on and off. The evolutionary stabilities of these circuits are measured by passaging cells while cycling function. The memory switch is stable over 400 h (17 days, 14 state changes); however, the gate breaks after 54 h (>2 days) due to continuous invertase expression. Genome sequencing reveals that the circuit remains intact, but the host strain evolves to reduce invertase expression. This work highlights the need to evaluate the evolutionary robustness and failure modes of circuit designs, especially as more complex multigate circuits are implemented.

A Plasmid-Borne System To Assess the Excision and Integration of Staphylococcal Cassette Chromosome mec Mediated by CcrA and CcrB

Resistance to methicillin and other β-lactam antibiotics in staphylococci is due to mecA, which is carried on a genomic island, staphylococcal cassette chromosome mec (SCCmec). The chromosomal excision and integration of SCCmec are mediated by the site-specific recombinase CcrAB or CcrC, encoded within this element. A plasmid-borne system was constructed to assess the activities of CcrA and CcrB in the excision and integration of SCCmec in Escherichia coli and Staphylococcus aureus. The excision frequency in E. coli mediated by CcrAB from methicillin-resistant S. aureus (MRSA) strain N315 was only 9.2%, while the integration frequency was 31.4%. In S. aureus the excision and integration frequencies were 11.0% and 18.7%, respectively. Truncated mutants identified the N-terminal domain of either CcrB or CcrA to be necessary for both integration and excision, while the C-terminal domain was important for recombination efficiency. Site-directed mutagenesis of the N-terminal domain identified S11 and R79 of CcrA and S16, R89, T149, and R151 of CcrB to be residues essential for catalytic activities, and the critical location of these residues was consistent with a model of the tertiary structure of the N terminus of CcrA and CcrB. Furthermore, CcrAB and CcrC, cloned from a panel of 6 methicillin-resistant S. aureus strains and 2 methicillin-resistant Staphylococcus epidermidis strains carrying SCCmec types II, IV, and V, also catalyzed integration at rates 1.3 to 10 times higher than the rates at which they catalyzed excision, similar to the results from N315. The tendency of SCCmec integration to be favored over excision may explain the low spontaneous excision frequency seen among MRSA strains.

IMPORTANCE

Spontaneous excision of the genomic island (SCCmec) that encodes resistance to beta-lactam antibiotics (methicillin resistance) in staphylococci would convert a methicillin-resistant strain to a methicillin-susceptible strain, improving therapy of difficult-to-treat infections. This study characterizes a model system by which the relative frequencies of excision and integration can be compared. Using a plasmid-based model for excision and integration mediated by the recombinases CcrA and CcrB, integration occurred at a higher frequency than excision, consistent with the low baseline excision frequency seen in most strains. This model system can now be used to study conditions and drugs that may raise the SCCmec excision frequency and generate strains that are beta-lactam susceptible.

The Serine Recombinases

In site-specific recombination, two short DNA sequences (‘sites’) are each cut at specific points in both strands, and the cut ends are rejoined to new partners. The enzymes that mediate recognition of the sites and the subsequent cutting and rejoining steps are called recombinases. Most recombinases fall into one of two families according to similarities of their protein sequences and mechanisms; these families are known as the tyrosine recombinases and the serine recombinases, the names referring to the conserved amino acid residue that attacks the DNA phosphodiester and becomes covalently linked to a DNA strand end during catalysis. This chapter gives an overview of our current understanding of the serine recombinases, their types, biological roles, structures, catalytic mechanisms, mechanisms of regulation, and applications.

Recombineering: A powerful tool for modification of bacteriophage genomes

Recombineering, a recently developed technique for efficient genetic manipulation of bacteria, is facilitated by phage-derived recombination proteins and has the advantage of using DNA substrates with short regions of homology. This system was first developed in E. coli but has since been adapted for use in other bacteria. It is now widely used in a number of different systems for a variety of purposes, and the construction of chromosomal gene knockouts, deletions, insertions, point mutations, as well as in vivo cloning, mutagenesis of bacterial artificial chromosomes and phasmids, and the construction of genomic libraries has been reported. However, these methods also can be effectively applied to the genetic modification of bacteriophage genomes, in both their prophage and lytically growing states. The ever-growing collection of fully sequenced bacteriophages raises more questions than they answer, including the unknown functions of vast numbers of genes with no known homologs and of unknown function. Recombineering of phage genomes is central to addressing these questions, enabling the simple construction of mutants, determination of gene essentiality, and elucidation of gene function. In turn, advances in our understanding of phage genomics should present similar recombineering tools for dissecting a multitude of other genetically naïve bacterial systems.

Evolution of genetic switch complexity

The circuitry of the phage λ genetic switch determining the outcome of lytic or lysogenic growth is well-integrated and complex, raising the question as to how it evolved. It is plausible that it arose from a simpler ancestral switch with fewer components that underwent various additions and refinements, as it adapted to vast numbers of different hosts and conditions. We have recently identified a new class of genetic switches found in mycobacteriophages and other prophages, in which immunity is dependent on integration. These switches contain only three genes (integrase, repressor and cro) and represent a major departure from the λ-like circuitry, lacking many features such as xis, cII and cIII. These small self-contained switches represent an unrealized, elegant circuitry for controlling infection outcome. In this addendum, we propose a model of possible events in the evolution of a complex λ-like switch from a simpler integration-dependent switch.

New applications for phage integrases

Within the last 25 years, bacteriophage integrases have rapidly risen to prominence as genetic tools for a wide range of applications from basic cloning to genome engineering. Serine integrases such as that from ϕC31 and its relatives have found an especially wide range of applications within diverse micro-organisms right through to multi-cellular eukaryotes. Here, we review the mechanisms of the two major families of integrases, the tyrosine and serine integrases, and the advantages and disadvantages of each type as they are applied in genome engineering and synthetic biology. In particular, we focus on the new areas of metabolic pathway construction and optimization, biocomputing, heterologous expression and multiplexed assembly techniques. Integrases are versatile and efficient tools that can be used in conjunction with the various extant molecular biology tools to streamline the synthetic biology production line.

•

Phage integrases are site-specific recombinases that mediate controlled and precise DNA integration and excision.

•

The serine integrases, such as ϕC31 integrase, can be used for efficient recombination in heterologous hosts as they use short recombination substrates, they are directional and they do not require host factors.

•

Both serine and tyrosine integrases, such as λ integrase, are versatile tools for DNA cloning and assembly in vivo and in vitro.

•

Controlled expression of orthologous serine integrases and their cognate recombination directionality factors can be used to generate living biocomputers.

•

Serine integrases are increasingly being exploited for synthetic biology applications.

Molecular Genetics of Mycobacteriophages

Mycobacteriophages have provided numerous essential tools for mycobacterial genetics, including delivery systems for transposons, reporter genes, and allelic exchange substrates, and components for plasmid vectors and mutagenesis. Their genetically diverse genomes also reveal insights into the broader nature of the phage population and the evolutionary mechanisms that give rise to it. The substantial advances in our understanding of the biology of mycobacteriophages including a large collection of completely sequenced genomes indicates a rich potential for further contributions in tuberculosis genetics and beyond.

Molecular Genetics of Mycobacteriophages

Mycobacteriophages have provided numerous essential tools for mycobacterial genetics, including delivery systems for transposons, reporter genes, and allelic exchange substrates, and components for plasmid vectors and mutagenesis. Their genetically diverse genomes also reveal insights into the broader nature of the phage population and the evolutionary mechanisms that give rise to it. The substantial advances in our understanding of the biology of mycobacteriophages including a large collection of completely sequenced genomes indicates a rich potential for further contributions in tuberculosis genetics and beyond.

The ins and outs of serine integrase site-specific recombination

Serine integrases catalyze the integration and excision of phage genomes into and out of bacterial chromosomes in a highly specific and directional manner, making these proteins powerful tools for genome engineering. In 2013, the first structure of a serine integrase-DNA complex was reported. This work revealed how the phage attP sequence is recognized by the integrase and provided important clues about how serine integrases bind to other attachment site sequences. The resulting structural models indicate that distinct spatial arrangements of integrase domains are present for each attachment site complex. Here we describe how serine integrases may exploit this site-dependent domain arrangement to regulate the direction of recombination. We also discuss how phage-encoded recombination directionality factors could change this directionality by altering the nature of inter-subunit interactions.

Cluster M mycobacteriophages Bongo, PegLeg, and Rey with unusually large repertoires of tRNA isotypes

Genomic analysis of a large set of phages infecting the common host Mycobacterium smegmatis mc(2)155 shows that they span considerable genetic diversity. There are more than 20 distinct types that lack nucleotide similarity with each other, and there is considerable diversity within most of the groups. Three newly isolated temperate mycobacteriophages, Bongo, PegLeg, and Rey, constitute a new group (cluster M), with the closely related phages Bongo and PegLeg forming subcluster M1 and the more distantly related Rey forming subcluster M2. The cluster M mycobacteriophages have siphoviral morphologies with unusually long tails, are homoimmune, and have larger than average genomes (80.2 to 83.7 kbp). They exhibit a variety of features not previously described in other mycobacteriophages, including noncanonical genome architectures and several unusual sets of conserved repeated sequences suggesting novel regulatory systems for both transcription and translation. In addition to containing transfer-messenger RNA and RtcB-like RNA ligase genes, their genomes encode 21 to 24 tRNA genes encompassing complete or nearly complete sets of isotypes. We predict that these tRNAs are used in late lytic growth, likely compensating for the degradation or inadequacy of host tRNAs. They may represent a complete set of tRNAs necessary for late lytic growth, especially when taken together with the apparent lack of codons in the same late genes that correspond to tRNAs that the genomes of the phages do not obviously encode.

IMPORTANCE

The bacteriophage population is vast, dynamic, and old and plays a central role in bacterial pathogenicity. We know surprisingly little about the genetic diversity of the phage population, although metagenomic and phage genome sequencing indicates that it is great. Probing the depth of genetic diversity of phages of a common host, Mycobacterium smegmatis, provides a higher resolution of the phage population and how it has evolved. Three new phages constituting a new cluster M further expand the diversity of the mycobacteriophages and introduce novel features. As such, they provide insights into phage genome architecture, virion structure, and gene regulation at the transcriptional and translational levels.

Control of directionality in Streptomyces phage φBT1 integrase-mediated site-specific recombination

Streptomyces phage φBT1 integrates its genome into the attB site of the host chromosome with the attP site to generate attL and attR. The φBT1 integrase belongs to the large serine recombinase subfamily which directly binds to target sites to initiate double strand breakage and exchange. A recombination directionality factor (RDF) is commonly required for switching integration to excision. Here we report the characterization of the RDF protein for φBT1 recombination. The RDF, is a phage-encoded gp3 gene product (28 KDa), which allows efficient active excision between attL and attR, and inhibits integration between attB and attP; Gp3 can also catalyze topological relaxation with the integrase of supercoiled plasmids containing a single excision site. Further study showed that Gp3 could form a dimer and interact with the integrase whether it bound to the substrate or not. The synapse formation of attL or attR alone with integrase and Gp3 showed that synapsis did not discriminate between the two sites, indicating that complementarity of central dinucleotides is the sole determinant of outcome in correct excision synapses. Furthermore, both in vitro and in vivo evidence support that the RDFs of φBT1 and φC31 were fully exchangeable, despite the low amino acid sequence identity of the two integrases.

Cross-talk between diverse serine integrases

Phage-encoded serine integrases are large serine recombinases that mediate integrative and excisive site-specific recombination of temperate phage genomes. They are well suited for use in heterologous systems and for synthetic genetic circuits as the attP and attB attachment sites are small (<50 bp), there are no host factor or DNA supercoiling requirements, and they are strongly directional, doing only excisive recombination in the presence of a recombination directionality factor. Combining different recombinases that function independently and without cross-talk to construct complex synthetic circuits is desirable, and several different serine integrases are available. However, we show here that these functions are not reliably predictable, and we describe a pair of serine integrases encoded by mycobacteriophages Bxz2 and Peaches with unusual and unpredictable specificities. The integrases share only 59% amino acid sequence identity and the attP sites have fewer than 50% shared bases, but they use the same attB site and there is non-reciprocal cross-talk between the two systems. The DNA binding specificities do not result from differences in specific DNA contacts but from the constraints imposed by the configuration of the component half-sites within each of the attachment site DNAs.

Accuracy and efficiency define Bxb1 integrase as the best of fifteen candidate serine recombinases for the integration of DNA into the human genome

Background

Phage-encoded serine integrases, such as φC31 integrase, are widely used for genome engineering. Fifteen such integrases have been described but their utility for genome engineering has not been compared in uniform assays.

Results

We have compared fifteen serine integrases for their utility for DNA manipulations in mammalian cells after first demonstrating that all were functional in E. coli. Chromosomal recombination reporters were used to show that seven integrases were active on chromosomally integrated DNA in human fibroblasts and mouse embryonic stem cells. Five of the remaining eight enzymes were active on extra-chromosomal substrates thereby demonstrating that the ability to mediate extra-chromosomal recombination is no guide to ability to mediate site-specific recombination on integrated DNA. All the integrases that were active on integrated DNA also promoted DNA integration reactions that were not mediated through conservative site-specific recombination or damaged the recombination sites but the extent of these aberrant reactions varied over at least an order of magnitude. Bxb1 integrase yielded approximately two-fold more recombinants and displayed about two fold less damage to the recombination sites than the next best recombinase; φC31 integrase.

Conclusions

We conclude that the Bxb1 and φC31 integrases are the reagents of choice for genome engineering in vertebrate cells and that DNA damage repair is a major limitation upon the utility of this class of site-specific recombinase.

Large serine recombinase domain structure and attachment site binding

Large serine recombinases (LSRs) catalyze the movement of DNA elements into and out of bacterial chromosomes using site-specific recombination between short DNA "attachment sites". The LSRs that function as bacteriophage integrases carry out integration between attachment sites in the phage (attP) and in the host (attB). This process is highly directional; the reverse excision reaction between the product attL and attR sites does not occur in the absence of a phage-encoded recombination directionality factor, nor does recombination typically occur between other pairings of attachment sites. Although the mechanics of strand exchange are reasonably well understood through studies of the closely related resolvase and invertase serine recombinases, many of the fundamental aspects of the LSR reactions have until recently remained poorly understood on a structural level. In this review, we discuss the results of several years worth of biochemical and molecular genetic studies of LSRs in light of recently described structural models of LSR-DNA complexes. The focus is understanding LSR domain structure, how LSRs bind to the attP and attB attachment sites, and the differences between attP-binding and attB-binding modes. The simplicity, site-selectivity and strong directionality of the LSRs has led to their use as important tools in a number of genetic engineering applications in a wide variety of organisms. Given the important potential role of LSR enzymes in genetic engineering and gene therapy, understanding the structure and DNA-binding properties of LSRs is of fundamental importance for those seeking to enhance or alter specificity and functionality in these systems.

Attachment site recognition and regulation of directionality by the serine integrases

Serine integrases catalyze the integration of bacteriophage DNA into a host genome by site-specific recombination between ‘attachment sites’ in the phage (attP) and the host (attB). The reaction is highly directional; the reverse excision reaction between the product attL and attR sites does not occur in the absence of a phage-encoded factor, nor does recombination occur between other pairings of attachment sites. A mechanistic understanding of how these enzymes achieve site-selectivity and directionality has been limited by a lack of structural models. Here, we report the structure of the C-terminal domains of a serine integrase bound to an attP DNA half-site. The structure leads directly to models for understanding how the integrase-bound attP and attB sites differ, why these enzymes preferentially form attP × attB synaptic complexes to initiate recombination, and how attL × attR recombination is prevented. In these models, different domain organizations on attP vs. attB half-sites allow attachment-site specific interactions to form between integrase subunits via an unusual protruding coiled-coil motif. These interactions are used to preferentially synapse integrase-bound attP and attB and inhibit synapsis of integrase-bound attL and attR. The results provide a structural framework for understanding, testing and engineering serine integrase function.

The secret lives of mycobacteriophages

The study of mycobacteriophages provides insights into viral diversity and evolution, as well as the genetics and physiology of their pathogenic hosts. Genomic characterization of 80 mycobacteriophages reveals a high degree of genetic diversity and an especially rich reservoir of interesting genes. These include a vast number of genes of unknown function that do not match known database entries and many genes whose functions can be predicted but which are not typically found as components of phage genomes. Thus many mysteries surround these genomes, such as why the genes are there, what do they do, how are they expressed and regulated, how do they influence the physiology of the host bacterium, and what forces of evolution directed them to their genomic homes? Although the genetic diversity and novelty of these phages is full of intrigue, it is a godsend for the mycobacterial geneticist, presenting an abundantly rich toolbox that can be exploited to devise new and effective ways for understanding the genetics and physiology of human tuberculosis. As the number of sequenced genomes continues to grow, their mysteries continue to thicken, and the time has come to learn more about the secret lives of mycobacteriophages.

Roles of two large serine recombinases in mobilizing the methicillin-resistance cassette SCCmec

Methicillin-resistant Staphylococcus aureus (MRSA) emerged via acquisition of a mobile element, staphylococcal cassette chromosome mec (SCCmec). Integration and excision of SCCmec is mediated by an unusual site-specific recombination system. Most variants of SCCmec encode two recombinases, CcrA and CcrB, that belong to the large serine family. Since CcrA and CcrB are always found together, we sought to address their specific roles. We show here that CcrA and CcrB can carry out both excisive and integrative recombination in Escherichia coli in the absence of any host-specific or SCCmec-encoded cofactors. CcrA and CcrB are promiscuous in their substrate choice: they act on many non-canonical pairs of recombination sites in addition to the canonical ones, which may explain tandem insertions into the SCCmec attachment site. Moreover, CcrB is always required, but CcrA is only required if one of the four half-sites is present. Recombinational activity correlates with DNA binding: CcrA recognizes only that half-site, which overlaps a conserved coding frame on the host chromosome. Therefore, we propose that CcrA serves as a specificity factor that emerged through modular evolution to enable recognition of a bacterial recombination site that is not an inverted repeat.

Attachment site selection and identity in Bxb1 serine integrase-mediated site-specific recombination

Phage-encoded serine integrases mediate directionally regulated site-specific recombination between short attP and attB DNA sites without host factor requirements. These features make them attractive for genome engineering and synthetic genetics, although the basis for DNA site selection is poorly understood. Here we show that attP selection is determined through multiple proofreading steps that reject non-attP substrates, and that discrimination of attP and attB involves two critical site features: the outermost 5–6 base pairs of attP that are required for Int binding and recombination but antagonize attB function, and the “discriminators” at positions −15/+15 that determine attB identity but also antagonize attP function. Thus, although the attachment sites differ in length and sequence, only two base changes are needed to convert attP to attL, and just two more from attL to attB. The opposing effect of site identifiers ensures that site schizophrenia with dual identities does not occur.

Site-specific recombinases catalyze recombination between two specific DNA sites to generate the products of recombination. The Integrase encoded by mycobacteriophage Bxb1 is a member of the serine-recombinase family and catalyzes strand exchange between attP and attB, the attachment sites for the phage and bacterial host, respectively. Although the DNA sites are relatively small (<50 bp), the reaction is highly selective for these sites and is also strongly directional. Here, we address the question of what sequences within attP are required for it to act as an attP site and identify the key sequence features that are required not just for Integrase binding but also for synapsis and post-synapsis events. We also have identified the key determinants of attP and attB identity, and although the sites are different in sequence and length, they can be interconverted with just two base changes in each of the half sites.

The site-specific integration reaction of Listeria phage A118 integrase, a serine recombinase

Background

A large subfamily of serine recombinases contains long polypeptide segments appended to the C-terminal end of the conserved catalytic domain. Members of this subfamily often function as phage integrases but also mediate transposition and regulate terminal differentiation processes in eubacteria. Although a few members of this subfamily have been studied in purified in vitro systems, key mechanistic aspects of reactions promoted by these recombinases remain to be determined, particularly with respect to the functions of the large C-terminal domain.

Results

We have developed and characterized a robust in vitro recombination reaction by the Listeria phage A118 integrase, a member of the subfamily of serine recombinases containing a large C-terminal domain. The reaction occurs in a simple buffered salt solution and exhibits a modest stimulation by divalent cations or spermidine and DNA supercoiling. Recombination with purified A118 integrase is unidirectional, being efficient only between attP and attB DNA sites to either join separate DNA molecules (intermolecular recombination) or to generate deletions or inversions depending on the relative orientation of att sites in cis (intramolecular recombination). The minimal attP site is 50 bp but requires only 44 bp of base sequence information, whereas the minimal attB site is 42 bp and requires 38 bp of base sequence information. DNA exchange occurs between the central 2 bp of attP and attB. Identity between these two base pairs is required for recombination, and they solely determine the orientation of recombination sites. The integrase dimer binds efficiently to full att sites, including the attL and attR integration products, but poorly and differentially to each half-site. The large C-terminal domain can be separated from the N-terminal catalytic by partial proteolysis and mediates non-cooperative DNA binding to att sites.

Conclusions

The basic properties of the phage A118 integrase reaction and its substrate requirements have been elucidated. A118 integrase thus joins the handful of biochemically characterized serine integrases that are serving as models for mechanistic studies on this important class of recombinases. Information reported here will also be useful in exploiting this recombinase for genetic engineering.

Rewritable digital data storage in live cells via engineered control of recombination directionality

The use of synthetic biological systems in research, healthcare, and manufacturing often requires autonomous history-dependent behavior and therefore some form of engineered biological memory. For example, the study or reprogramming of aging, cancer, or development would benefit from genetically encoded counters capable of recording up to several hundred cell division or differentiation events. Although genetic material itself provides a natural data storage medium, tools that allow researchers to reliably and reversibly write information to DNA in vivo are lacking. Here, we demonstrate a rewriteable recombinase addressable data (RAD) module that reliably stores digital information within a chromosome. RAD modules use serine integrase and excisionase functions adapted from bacteriophage to invert and restore specific DNA sequences. Our core RAD memory element is capable of passive information storage in the absence of heterologous gene expression for over 100 cell divisions and can be switched repeatedly without performance degradation, as is required to support combinatorial data storage. We also demonstrate how programmed stochasticity in RAD system performance arising from bidirectional recombination can be achieved and tuned by varying the synthesis and degradation rates of recombinase proteins. The serine recombinase functions used here do not require cell-specific cofactors and should be useful in extending computing and control methods to the study and engineering of many biological systems.

The Bxb1 gp47 recombination directionality factor is required not only for prophage excision, but also for phage DNA replication

Mycobacteriophage Bxb1 encodes a serine-integrase that catalyzes both integrative and excisive site-specific recombination. However, excision requires a second phage-encoded protein, gp47, which serves as a recombination directionality factor (RDF). The viability of a Bxb1 mutant containing an S153A substitution in gp47 that eliminates the RDF activity of Bxb1 gp47 shows that excision is not required for Bxb1 lytic growth. However, the inability to construct a Δ47 deletion mutant of Bxb1 suggests that gp47 provides a second function that is required for lytic growth, although the possibility of an essential cis-acting site cannot be excluded. Characterization of a mutant prophage of mycobacteriophage L5 in which gene 54 - a homologue of Bxb1 gene 47 - is deleted shows that it also is defective in induced lytic growth, and exhibits a strong defect in DNA replication. Bxb1 gp47 and its relatives are also unusual in containing conserved motifs associated with a phosphoesterase function, although we have not been able to show robust phosphoesterase activity of the proteins, and amino acid substitutions with the conserved motifs do not interfere with RDF activity. We therefore propose that Bxb1 gp47 and its relatives provide an important function in phage DNA replication that has been co-opted by the integration machinery of the serine-integrases to control the directionality of recombination.

Cutting out the φC31 prophage

To establish a lysogenic lifestyle, the temperate bacteriophage φC31 integrates its genome into the chromosome of its Streptomyces host, by site-specific recombination between attP (the attachment site in the phage DNA) and attB (the chromosomal attachment site). This reaction is promoted by a phage-encoded serine recombinase Int. To return to the lytic lifestyle, the prophage excises its DNA by a similar Int-mediated reaction between the recombinant sites flanking the prophage, attL and attR. φC31 Int has been developed into a popular experimental tool for integration of transgenic DNA into the genomes of eukaryotic organisms. However, until now it has not been possible to use Int to promote the reverse reaction, excision. In many other phages, the presence of a recombination directionality factor (RDF) protein biases the phage-encoded integrase towards prophage excision, whereas absence of the RDF favours integration; but the φC31 RDF had proved elusive. In this issue of Molecular Microbiology, Khaleel et al. (2011) report the identification and purification of the φC31 RDF, and show that it both promotes excision and inhibits integration by direct protein-protein interactions with Int itself.

Single-molecule analysis reveals the molecular bearing mechanism of DNA strand exchange by a serine recombinase

Structural and topological data suggest that serine site-specific DNA recombinases exchange duplex DNAs by rigid-body relative rotation of the two halves of the synapse, mediated by a flat protein-protein interaction surface. We present evidence for this rotational motion for a simple serine recombinase, the Bxb1 phage integrase, from a single-DNA-based supercoil-release assay that allows us to follow crossover site cleavage, rotation, religation, and product release in real time. We have also used a two-DNA braiding-relaxation experiment to observe the effect of synapse rotation in reactions on two long molecules. Relaxation and unbraiding are rapid (averaging 54 and 70 turns/s, respectively) and complete, with no discernible pauses. Nevertheless, the molecular friction associated with rotation is larger than that of type-I topoisomerases in a similar assay. Surprisingly we find that the synapse can stay rotationally "open" for many minutes.

Recombinase technology: applications and possibilities

The use of recombinases for genomic engineering is no longer a new technology. In fact, this technology has entered its third decade since the initial discovery that recombinases function in heterologous systems (Sauer in Mol Cell Biol 7(6):2087-2096, 1987). The random insertion of a transgene into a plant genome by traditional methods generates unpredictable expression patterns. This feature of transgenesis makes screening for functional lines with predictable expression labor intensive and time consuming. Furthermore, an antibiotic resistance gene is often left in the final product and the potential escape of such resistance markers into the environment and their potential consumption raises consumer concern. The use of site-specific recombination technology in plant genome manipulation has been demonstrated to effectively resolve complex transgene insertions to single copy, remove unwanted DNA, and precisely insert DNA into known genomic target sites. Recombinases have also been demonstrated capable of site-specific recombination within non-nuclear targets, such as the plastid genome of tobacco. Here, we review multiple uses of site-specific recombination and their application toward plant genomic engineering. We also provide alternative strategies for the combined use of multiple site-specific recombinase systems for genome engineering to precisely insert transgenes into a pre-determined locus, and removal of unwanted selectable marker genes.

DNA cleavage is independent of synapsis during Streptomyces phage phiBT1 integrase-mediated site-specific recombination

Bacteriophage-encoded serine recombinases have great potential in genetic engineering but their catalytic mechanisms have not been adequately studied. Integration of ϕBT1 and ϕC31 via their attachment (att) sites is catalyzed by integrases of the large serine recombinase subtype. Both ϕBT1 and ϕC31 integrases were found to cleave single-substrate att sites without synaptic complex formation, and ϕBT1 integrase relaxed supercoiled DNA containing a single integration site. Systematic mutation of the central att site dinucleotide revealed that cleavage was independent of nucleotide sequence, but rejoining was crucially dependent upon complementarity of the cleavage products. Recombination between att sites containing dinucleotides with antiparallel complementarity led to antiparallel recombination. Integrase-substrate pre-incubation experiments revealed that the enzyme can form an attP-integrase tetramer complex that then captures naked attB DNA, and suggested that two alternative assembly pathways can lead to synaptic complex formation.

Mycobacteriophages: genes and genomes

Viruses are powerful tools for investigating and manipulating their hosts, but the enormous size and amazing genetic diversity of the bacteriophage population have emerged as something of a surprise. In light of the evident importance of mycobacteria to human health--especially Mycobacterium tuberculosis, which causes tuberculosis--and the difficulties that have plagued their genetic manipulation, mycobacteriophages are especially appealing subjects for discovery, genomic characterization, and manipulation. With more than 70 complete genome sequences available, the mycobacteriophages have provided a wealth of information on the diversity of phages that infect a common bacterial host, revealed the pervasively mosaic nature of phage genome architectures, and identified a huge number of genes of unknown function. Mycobacteriophages have provided key tools for tuberculosis genetics, and new methods for simple construction of mycobacteriophage recombinants will facilitate postgenomic explorations into mycobacteriophage biology.

Resolvase-like serine recombinase mediates integration/excision in the bacteriophage φRSM

ϕRSM1, a filamentous phage infecting Ralstonia solanacearum, encodes an open reading frame (ORF14) that exhibits significant homology to members of the resolvase/invertase subfamily of site-specific serine recombinases. Similar prophages are found in the genomes of various strains of R. solanacearum, R. pickettii, and Burkholderia pseudomallei. We have characterized the integrative and excisive recombination reactions mediated by the ϕRSM1 integrase using in vivo assays. An E. coli plasmid containing the RSM1 orf14 and attP sequences (pT-orf14-attP) was shown to integrate into the attB sequence of R. solanacearum cells. Intermolecular recombination between pT-orf14-attP and pS-attB (a R. solanacearum plasmid containing attB) also occurred in R. solanacearum cells. The products of attP/attB recombination, i.e., attL and attR, were exactly identical to the sequences found in the prophage ϕRSM in R. solanacearum strains. Intramolecular recombination between the attL and attR sequences (excisive recombination) on the pRecomb plasmid was also shown to occur in an orf14-dependent manner. This is the first evidence that a small serine recombinase from the resolvase/invertase group may function in integrative and excisive recombination for filamentous phages.

Site-specific recombination by φC31 integrase and other large serine recombinases

Most temperate phages encode an integrase for integration and excision of the prophage. Integrases belong either to the λ Int family of tyrosine recombinases or to a subgroup of the serine recombinases, the large serine recombinases. Integration by purified serine integrases occurs efficiently in vitro in the presence of their cognate (~50 bp) phage and host attachment sites, attP and attB respectively. Serine integrases require an accessory protein, Xis, to promote excision, a reaction in which the products of the integration reaction, attL and attR, recombine to regenerate attP and attB. Unlike other directional recombinases, serine integrases are not controlled by proteins occupying accessory DNA-binding sites. Instead, it is thought that different integrase conformations, induced by binding to the DNA substrates, control protein–protein interactions, which in turn determine whether recombination proceeds. The present review brings together the evidence for this model derived from the studies on φC31 integrase, Bxb1 integrase and other related proteins.

Comparative genomic analysis of 60 Mycobacteriophage genomes: genome clustering, gene acquisition, and gene size

Mycobacteriophages are viruses that infect mycobacterial hosts. Expansion of a collection of sequenced phage genomes to a total of 60-all infecting a common bacterial host-provides further insight into their diversity and evolution. Of the 60 phage genomes, 55 can be grouped into nine clusters according to their nucleotide sequence similarities, 5 of which can be further divided into subclusters; 5 genomes do not cluster with other phages. The sequence diversity between genomes within a cluster varies greatly; for example, the 6 genomes in Cluster D share more than 97.5% average nucleotide similarity with one another. In contrast, similarity between the 2 genomes in Cluster I is barely detectable by diagonal plot analysis. In total, 6858 predicted open-reading frames have been grouped into 1523 phamilies (phams) of related sequences, 46% of which possess only a single member. Only 18.8% of the phams have sequence similarity to non-mycobacteriophage database entries, and fewer than 10% of all phams can be assigned functions based on database searching or synteny. Genome clustering facilitates the identification of genes that are in greatest genetic flux and are more likely to have been exchanged horizontally in relatively recent evolutionary time. Although mycobacteriophage genes exhibit a smaller average size than genes of their host (205 residues compared with 315), phage genes in higher flux average only 100 amino acids, suggesting that the primary units of genetic exchange correspond to single protein domains.

A method for rapid genetic integration into Plasmodium falciparum utilizing mycobacteriophage Bxb1 integrase

Genetic manipulation of the human malaria parasite Plasmodium falciparum has presented substantial challenges for research efforts aimed at better understanding the complex biology of this highly virulent organism. The development of methods to perform gene disruption, allelic replacement or transgene expression has provided important insights into the function of parasite genes. However, genomic integration studies have been hindered by low transfection and recombination efficiencies, and are complicated by the propensity of this parasite to maintain episomal replicating plasmids. We have developed a fast and efficient site-specific system of integrative recombination into the P. falciparum genome, which is catalyzed by the mycobacteriophage Bxb1 serine integrase. This system has the advantage of providing greater genetic and phenotypic homogeneity within transgenic lines as compared to earlier methods based on episomal replication of plasmids. Herein, we present this methodology.

Control of directionality in bacteriophage mv4 site-specific recombination: functional analysis of the Xis factor

The integrase of the temperate bacteriophage mv4 catalyzes site-specific recombination between the phage attP site and the host attB site during Lactobacillus delbrueckii lysogenization. The mv4 prophage is excised during the induction of lytic growth. Excisive site-specific recombination between the attR and attL sites is also catalyzed by the phage-encoded recombinase, but the directionality of the recombination is determined by a second phage-encoded protein, the recombination directionality factor (RDF). We have identified and functionally characterized the RDF involved in site-specific excision of the prophage genome. The mv4 RDF, (mv4)Xis, is encoded by the second gene of the early lytic operon. It is a basic protein of 56 amino acids. Electrophoretic mobility shift assays demonstrated that (mv4)Xis binds specifically to the attP and attR sites via two DNA-binding sites, introducing a bend into the DNA. In vitro experiments and in vivo recombination assays with plasmids in Escherichia coli and Lactobacillus plantarum demonstrated that (mv4)Xis is absolutely required for inter- or intramolecular recombination between the attR and attL sites. In contrast to the well-known phage site-specific recombination systems, the integrative recombination between the attP and attB sites seems not to be inhibited by the presence of (mv4)Xis.

In vitro characterization of the site-specific recombination system based on actinophage TG1 integrase

We have previously shown that, in vivo, the integration system based on the gene encoding the TG1 integrase and the corresponding attB (TG1) and attP (TG1) sites works well not only in Streptomyces strains, but also in Escherichia coli. Furthermore, the attachment sites for TG1 integrase are distinct from those of phi C31 integrase. In this report, we expressed TG1 integrase as a GST-TG1 integrase fusion protein and then used affinity separation and specific cleavage to release purified integrase. Conditions for in vitro recombination were established using the purified TG1 integrase and its cognate attP (TG1) and attB (TG1) sites. TG1 integrase efficiently catalyzed a site-specific recombination between attB (TG1) and attP (TG1) sites irrespective of their substrate topology. The minimal sequences of attP (TG1) and attB (TG1) sites required for the substrates of TG1 integrase were demonstrated to be 43 and 39-bp, respectively. These results provide the basic features of the TG1 integrase system to be used as biotechnological tools, as well as to unravel the mechanism of the serine integrase.

DNA binding and synapsis by the large C-terminal domain of phiC31 integrase

The integrase (Int) from phage ϕC31 acts on the phage and host-attachment sites, attP and attB, to form an integrated prophage flanked by attL and attR. Excision (attL × attR recombination) is prevented, in the absence of accessory factors, by a putative coiled-coil motif in the C-terminal domain (CTD). Int has a serine recombinase N-terminal domain, required for synapsis of recombination substrates and catalysis. We show here that the coiled-coil motif mediates protein–protein interactions between CTDs, but only when bound to DNA. Although the histidine-tagged CTD (hCTD) was monomeric in solution, hCTD bound cooperatively to three of the recombination substrates (attB, attL and attR). Furthermore, when provided with attP and attB, hCTD brought these substrates together in a synaptic complex. Substitutions in the coiled-coil motif that greatly reduce Int integration activity, L460P and Y475H, prevented CTD–CTD interactions and led to defective DNA binding and no detectable DNA synapsis. A substitution, E449K, in full length Int confers the ability to perform excision in addition to integration as it has gained the ability to synapse attL × attR. hCTD^E449K was similar to hCTD in DNA binding but unable to form the CTD synapse suggesting that the CTD synapse is not essential but could be part of the mechanism that controls directionality.

BRED: a simple and powerful tool for constructing mutant and recombinant bacteriophage genomes

Advances in DNA sequencing technology have facilitated the determination of hundreds of complete genome sequences both for bacteria and their bacteriophages. Some of these bacteria have well-developed and facile genetic systems for constructing mutants to determine gene function, and recombineering is a particularly effective tool. However, generally applicable methods for constructing defined mutants of bacteriophages are poorly developed, in part because of the inability to use selectable markers such as drug resistance genes during viral lytic growth. Here we describe a method for simple and effective directed mutagenesis of bacteriophage genomes using Bacteriophage Recombineering of Electroporated DNA (BRED), in which a highly efficient recombineering system is utilized directly on electroporated phage DNA; no selection is required and mutants can be readily detected by PCR. We describe the use of BRED to construct unmarked gene deletions, in-frame internal deletions, base substitutions, precise gene replacements, and the addition of gene tags.

Recombineering mycobacteria and their phages

Bacteriophages are central components in the development of molecular tools for microbial genetics. Mycobacteriophages have proven to be a rich resource for tuberculosis genetics, and the recent development of a mycobacterial recombineering system based on mycobacteriophage Che9c-encoded proteins offers new approaches to mycobacterial mutagenesis. Expression of the phage exonuclease and recombinase substantially enhances recombination frequencies in both fast- and slow-growing mycobacteria, thereby facilitating construction of both gene knockout and point mutants; it also provides a simple and efficient method for constructing mycobacteriophage mutants. Exploitation of host-specific phages thus provides a general strategy for recombineering and mutagenesis in genetically naive systems.

Highly efficient in vitro site-specific recombination system based on streptomyces phage phiBT1 integrase

The Streptomyces phage phiBT1 encodes a site-specific integrase of the large serine recombinase subfamily. In this report, the enzymatic activity of the phiBT1 integrase was characterized in vitro. We showed that this integrase has efficient integration activity with substrate DNAs containing attB and attP sites, independent of DNA supercoiling or cofactors. Both intra- and intermolecular recombinations proceed with rapid kinetics. The recombination is highly specific, and no reactions are observed between pairs of sites including attB and attL, attB and attR, attP and attL, or attP and attR or between two identical att sequences; however, a low but significant frequency of excision recombination between attL and attR is observed in the presence of the phiBT1 integrase alone. In addition, for efficient integration, the minimal sizes of attB and attP are 36 bp and 48 bp, respectively. This site-specific recombination system is efficient and simple to use; thus, it could have applications for the manipulation of DNA in vitro.

A motif in the C-terminal domain of phiC31 integrase controls the directionality of recombination

Bacteriophage ϕC31 encodes an integrase, which acts on the phage and host attachment sites, attP and attB, to form an integrated prophage flanked by attL and attR. In the absence of accessory factors, ϕC31 integrase cannot catalyse attL x attR recombination to excise the prophage. To understand the mechanism of directionality, mutant integrases were characterized that were active in excision. A hyperactive integrase, Int E449K, gained the ability to catalyse attL x attR, attL x attL and attR x attR recombination whilst retaining the ability to recombine attP x attB. A catalytically defective derivative of this mutant, Int S12A, E449K, could form stable complexes with attP/attB, attL/attR, attL/attL and attR/attR under conditions where Int S12A only complexed with attP/attB. Further analysis of the Int E449K-attL/attR synaptic events revealed a preference for one of the two predicted synapse structures with different orientations of the attL/attR sites. Several amino acid substitutions conferring hyperactivity, including E449K, were localized to one face of a predicted coiled-coil motif in the C-terminal domain. This work shows that a motif in the C-terminal domain of ϕC31 integrase controls the formation of the synaptic interface in both integration and excision, possibly through a direct role in protein–protein interactions.

Comparative genomics of the mycobacteriophages: insights into bacteriophage evolution

The recognition of the vast numbers of bacteriophages in the biosphere has prompted a renewal of interest in understanding their morphological and genetic diversity, and elucidating the evolutionary mechanisms that give rise to them. We have approached these questions by isolating and characterizing a collection of mycobacteriophages that infect a common bacterial host, Mycobacterium smegmatis. Comparative genomic analysis of 50 mycobacteriophages shows that they are highly diverse, although not uniformly so, that they are pervasively mosaic with a multitude of single gene modules, and that this mosaicism is generated through illegitimate recombination.

Two-step site selection for serine-integrase-mediated excision: DNA-directed integrase conformation and central dinucleotide proofreading

Bacteriophage-encoded serine-integrases are members of the large family of serine-recombinases and catalyze site-specific integrative recombination between a phage attP site and a bacterial attB site to form an integrated prophage. Prophage excision involves a second site-specific recombination event, in which the sites generated by integration, attL and attR, are used as substrates to regenerate attP and attB. Excision is catalyzed by integrase but also requires a phage-encoded recombination directionality factor (RDF). The Bxb1 recombination sites, attP and attB, are small (<50 bp), different in sequence, and quasisymmetrical, and they give rise to attL- and attR-recombinant products that are asymmetric but similar to each other, each being composed of B- and P-type half-sites. We show here that the determination of correct excision products is a two-step process, with a presynaptic RDF-dependent step that aligns attL and attR in the correct orientation and a postsynaptic step in which the nonpalindromic central dinucleotide confers identity to attL and attR and prevents each from recombining with itself.

Efficient point mutagenesis in mycobacteria using single-stranded DNA recombineering: characterization of antimycobacterial drug targets

Construction of genetically isogenic strains of mycobacteria is complicated by poor recombination rates and the lack of generalized transducing phages for Mycobacterium tuberculosis. We report here a powerful method for introducing single point mutations into mycobacterial genomes using oligonucleotide-derived single-stranded DNA recombineering and mycobacteriophage-encoded proteins. Phage Che9c gp61-mediated recombination is sufficiently efficient that single base changes can be introduced without requirement for direct selection, with isogenic mutant strains identified simply by PCR. Efficient recombination requires only short (50 nucleotide) oligonucleotides, but there is an unusually strong strand bias and an oligonucleotide targeting lagging strand DNA synthesis can recombine more than 10,000-fold efficiently than its complementary oligonucleotide. This ssDNA recombineering provides a simple assay for comparing the activities of related phage recombinases, and we find that both Escherichia coli RecET and phage lambda Red recombination proteins function inefficiently in mycobacteria, illustrating the utility of developing recombineering in new bacterial systems using host-specific bacteriophage recombinases. ssDNA mycobacterial recombineering provides a simple approach to characterizing antimycobacterial drug targets, and we have constructed and characterized single point mutations that confer resistance to isoniazid, rifampicin, ofloxacin and streptomycin.

Sequences in attB that affect the ability of phiC31 integrase to synapse and to activate DNA cleavage

Phage integrases are required for recombination of the phage genome with the host chromosome either to establish or exit from the lysogenic state. C31 integrase is a member of the serine recombinase family of site-specific recombinases. In the absence of any accessory factors integrase is unidirectional, catalysing the integration reaction between the phage and host attachment sites, attP x attB to generate the hybrid sites, attL and attR. The basis for this directionality is due to selective synapsis of attP and attB sites. Here we show that mutations in attB can block the integration reaction at different stages. Mutations at positions distal to the crossover site inhibit recombination by destabilizing the synapse with attP without significantly affecting DNA-binding affinity. These data are consistent with the proposal that integrase adopts a specific conformation on binding to attB that permits synapsis with attP. Other attB mutants with changes close to the crossover site are able to form a stable synapse but cleavage of the substrates is prevented. These mutants indicate that there is a post-synaptic DNA recognition event that results in activation of DNA cleavage.

Recombineering in Mycobacterium tuberculosis

Genetic dissection of M. tuberculosis is complicated by its slow growth and its high rate of illegitimate recombination relative to homologous DNA exchange. We report here the development of a facile allelic exchange system by identification and expression of mycobacteriophage-encoded recombination proteins, adapting a strategy developed previously for recombineering in Escherichia coli. Identifiable recombination proteins are rare in mycobacteriophages, and only 1 of 30 genomically characterized mycobacteriophages (Che9c) encodes homologs of both RecE and RecT. Expression and biochemical characterization show that Che9c gp60 and gp61 encode exonuclease and DNA-binding activities, respectively, and expression of these proteins substantially elevates recombination facilitating allelic exchange in both M. smegmatis and M. tuberculosis. Mycobacterial recombineering thus provides a simple approach for the construction of gene replacement mutants in both slow- and fast-growing mycobacteria.

A peptidoglycan hydrolase motif within the mycobacteriophage TM4 tape measure protein promotes efficient infection of stationary phase cells

The predominant morphotype of mycobacteriophage virions has a DNA-containing capsid attached to a long flexible non-contractile tail, features characteristic of the Siphoviridae. Within these phage genomes the tape measure protein (tmp) gene can be readily identified due to the well-established relationship between the length of the gene and the length of the phage tail--because these phages typically have long tails, the tmp gene is usually the largest gene in the genome. Many of these mycobacteriophage Tmp's contain small motifs with sequence similarity to host proteins. One of these motifs (motif 1) corresponds to the Rpf proteins that have lysozyme activity and function to stimulate growth of dormant bacteria, while the others (motifs 2 and 3) are related to proteins of unknown function, although some of the related proteins of the host are predicted to be involved in cell wall catabolism. We show here that motif 3-containing proteins have peptidoglycan-hydrolysing activity and that while this activity is not required for phage viability, it facilitates efficient infection and DNA injection into stationary phase cells. Tmp's of mycobacteriophages may thus have acquired these motifs in order to avoid a selective disadvantage that results from changes in peptidoglycan in non-growing cells.

Efficient site-specific integration in Plasmodium falciparum chromosomes mediated by mycobacteriophage Bxb1 integrase

Here we report an efficient, site-specific system of genetic integration into Plasmodium falciparum malaria parasite chromosomes. This is mediated by mycobacteriophage Bxb1 integrase, which catalyzes recombination between an incoming attP and a chromosomal attB site. We developed P. falciparum lines with the attB site integrated into the glutaredoxin-like cg6 gene. Transfection of these attB(+) lines with a dual-plasmid system, expressing a transgene on an attP-containing plasmid together with a drug resistance gene and the integrase on a separate plasmid, produced recombinant parasites within 2 to 4 weeks that were genetically uniform for single-copy plasmid integration. Integrase-mediated recombination resulted in proper targeting of parasite proteins to intra-erythrocytic compartments, including the apicoplast, a plastid-like organelle. Recombinant attB x attP parasites were genetically stable in the absence of drug and were phenotypically homogeneous. This system can be exploited for rapid genetic integration and complementation analyses at any stage of the P. falciparum life cycle, and it illustrates the utility of Bxb1-based integrative recombination for genetic studies of intracellular eukaryotic organisms.