A degenerate primer MOB typing (DPMT) method to classify gamma-proteobacterial plasmids in clinical and environmental settings

Genomic and metagenomic technologies to explore the antibiotic resistance mobilome

Antibiotic resistance is a relevant problem for human health that requires global approaches to establish a deep understanding of the processes of acquisition, stabilization, and spread of resistance among human bacterial pathogens. Since natural (nonclinical) ecosystems are reservoirs of resistance genes, a health-integrated study of the epidemiology of antibiotic resistance requires the exploration of such ecosystems with the aim of determining the role they may play in the selection, evolution, and spread of antibiotic resistance genes, involving the so-called resistance mobilome. High-throughput sequencing techniques allow an unprecedented opportunity to describe the genetic composition of a given microbiome without the need to subculture the organisms present inside. However, bioinformatic methods for analyzing this bulk of data, mainly with respect to binning each resistance gene with the organism hosting it, are still in their infancy. Here, we discuss how current genomic methodologies can serve to analyze the resistance mobilome and its linkage with different bacterial genomes and metagenomes. In addition, we describe the drawbacks of current methodologies for analyzing the resistance mobilome, mainly in cases of complex microbiotas, and discuss the possibility of implementing novel tools to improve our current metagenomic toolbox.

Conjugative transmission of antibiotic-resistance from stream water Escherichia coli as related to number of sulfamethoxazole but not class 1 and 2 integrase genes

A conjugation assay was used to determine the effects of phenotypic resistance to one to up to 5 antibiotics, sampling site of origin, presence or absence of class 1 and/or class 2 integrase (intI) genes (intI1 and intI2), and the number of sulfamethoxazole resistance (sul) and trimethoprim resistance (dfr) genes on the transfer frequencies of plasmids from environmental, antibiotic-resistant Escherichia coli. Of 51 sulfamethoxazole and trimethoprim-resistant E. coli isolates conferring at least one mob gene (mob_P51, mob_F11, mob_F12, mob_Q11, mob_Q12 , or mob_Qu ), 38 produced transconjugants with an overall mean frequency of 1.60 × 10^-3 transconjugants/ donors (T/D) or 5.89 × 10^-3 transconjugants/recipients (T/R). The presence or absence of intI1 and intI2 and the presence or absence of different targeted dfr genes (dfrA1, dfrA8, dfrA12, dfrA14, dfrA17, and/or dfrB3) were not statistically related to plasmid transfer frequencies as determined by ANOVA (P ≥ 0.05). However, E. coli isolates recovered 2 km downstream of wastewater treatment plant effluent input, and those possessing resistance to 3 antibiotics had significantly greater plasmid transfer frequency than their counterparts when calculated as T/D (ANOVA followed by Fisher's least significant difference means comparison, P < 0.05). Greater plasmid transfer frequency calculated as T/D was also measured for E. coli possessing 3 compared to a single sul gene. The in-vitro frequency suggests that horizontal gene transfer of conjugative mediated-antibiotic (sul) resistance genes may be significant among resistant, stream bacteria.

Genetic redundancy and persistence of plasmid-mediated trimethoprim/sulfamethoxazole resistant effluent and stream water Escherichia coli

Antibiotic resistant bacteria may persist in effluent receiving surface water in the presence of low (sub-inhibitory) antibiotic concentrations if the bacteria possess multiple genes encoding resistance to the same antibiotic. This redundancy of antibiotic resistance genes may occur in plasmids harboring conjugation and mobilization (mob) and integrase (intI) genes. Plasmids extracted from 76 sulfamethoxazole-trimethoprim resistant Escherichia coli originally isolated from effluent and an effluent-receiving stream were used as DNA template to identify sulfamethoxazole (sul) and trimethoprim (dfr) resistances genes plus detect the presence of intI and mob genes using PCR. Sulfamethoxazole and trimethoprim resistance was plasmid-mediated with three sul (sul1, sul2 and sul3 genes) and four dfr genes (dfrA12, dfrA8, dfrA17, and dfrA1 gene) the most prevalently detected. Approximately half of the plasmids carried class 1 and/or 2 integron and, although unrelated, half were also transmissible. Sampling site in relationship to effluent input significantly affected the number of intI and mob but not the number of sul and dfr genes. In the presence of low (sub-inhibitory) sulfamethoxazole concentration, isolates persisted regardless of integron and mobilization gene designation, whereas in the presence of trimethoprim, the presence of both integron and mobilization genes made isolates less persistent than in the absence of both or the presence of a gene from either group individually. Regardless, isolates persisted in large concentrations throughout the experiment. Treated effluent containing antibiotic resistant bacteria may be an important source of integrase and mobilization genes into the stream environment. Sulfamethoxazole-trimethoprim resistant bacteria may have a high degree of genetic redundancy and diversity carrying resistance to each antibiotic, although the role of integrase and mobilization genes towards persistence is unclear.

Plasmid Detection, Characterization, and Ecology

Plasmids are important vehicles for rapid adaptation of bacterial populations to changing environmental conditions. It is thought that to reduce the cost of plasmid carriage, only a fraction of a local population carries plasmids or is permissive to plasmid uptake. Plasmids provide various accessory traits which might be beneficial under particular conditions. The genetic variation generated by plasmid carriage within populations ensures the robustness toward environmental changes. Plasmid-mediated gene transfer plays an important role not only in the mobilization and dissemination of antibiotic resistance genes but also in the spread of degradative pathways and pathogenicity determinants of pathogens. Here we summarize the state-of-the-art methods to study the occurrence, abundance, and diversity of plasmids in environmental bacteria. Increasingly, cultivation-independent total-community DNA-based methods are being used to characterize and quantify the diversity and abundance of plasmids in relation to various biotic and abiotic factors. An improved understanding of the ecology of plasmids and their hosts is crucial in the development of intervention strategies for antibiotic-resistance-gene spread. We discuss the potentials and limitations of methods used to determine the host range of plasmids, as the ecology of plasmids is tightly linked to their hosts. The recent advances in sequencing technologies provide an enormous potential for plasmid classification, diversity, and evolution studies, but numerous challenges still exist.

Resistance mechanisms in Enterobacteriaceae

Enterobacteriaceae are responsible for a large proportion of serious, life-threatening infections and resistance to multiple antibiotics in these organisms is an increasing global public health problem. Mutations in chromosomal genes contribute to antibiotic resistance, but Enterobacteriaceae are adapted to sharing genetic material and much important resistance is due to 'mobile' resistance genes. Different mobile genetic elements, which have different characteristics, are responsible for capturing these genes from the chromosomes of a variety of bacterial species and moving them between DNA molecules. If transferred to plasmids, these resistance genes are then able to be transferred 'horizontally' between different bacterial cells, including different species, and well as being transferred 'vertically' during cell division. Carriage of several resistance genes on the same plasmid enables a bacterial cell to acquire multi-resistance in a single step and means that spread of one resistance gene may be co-selected for by use of antibiotics other than those to which it confers resistance. Many different mobile genes conferring resistance to each class of antibiotic have been identified, complicating detection of the factors responsible for a particular resistance phenotype, especially when changes in chromosomal genes may also confer or contribute to resistance. Understanding the mechanisms of antibiotic resistance, and the means by which these mechanisms can evolve and disseminate, is important for developing ways to efficiently track the spread of resistance and to optimise treatment.

Origin-of-transfer sequences facilitate mobilisation of non-conjugative antimicrobial-resistance plasmids in Staphylococcus aureus

Staphylococcus aureus is a common cause of hospital, community and livestock-associated infections and is increasingly resistant to multiple antimicrobials. A significant proportion of antimicrobial-resistance genes are plasmid-borne, but only a minority of S. aureus plasmids encode proteins required for conjugative transfer or Mob relaxase proteins required for mobilisation. The pWBG749 family of S. aureus conjugative plasmids can facilitate the horizontal transfer of diverse antimicrobial-resistance plasmids that lack Mob genes. Here we reveal that these mobilisable plasmids carry copies of the pWBG749 origin-of-transfer (oriT) sequence and that these oriT sequences facilitate mobilisation by pWBG749. Sequences resembling the pWBG749 oriT were identified on half of all sequenced S. aureus plasmids, including the most prevalent large antimicrobial-resistance/virulence-gene plasmids, pIB485, pMW2 and pUSA300HOUMR. oriT sequences formed five subfamilies with distinct inverted-repeat-2 (IR2) sequences. pWBG749-family plasmids encoding each IR2 were identified and pWBG749 mobilisation was found to be specific for plasmids carrying matching IR2 sequences. Specificity of mobilisation was conferred by a putative ribbon-helix-helix-protein gene smpO. Several plasmids carried 2–3 oriT variants and pWBG749-mediated recombination occurred between distinct oriT sites during mobilisation. These observations suggest this relaxase-in trans mechanism of mobilisation by pWBG749-family plasmids is a common mechanism of plasmid dissemination in S. aureus.

Genomics of microbial plasmids: classification and identification based on replication and transfer systems and host taxonomy

Plasmids are important "vehicles" for the communication of genetic information between bacteria. The exchange of plasmids transmits pathogenically and environmentally relevant traits to the host bacteria, promoting their rapid evolution and adaptation to various environments. Over the past six decades, a large number of plasmids have been identified and isolated from different microbes. With the revolution of sequencing technology, more than 4600 complete sequences of plasmids found in bacteria, archaea, and eukaryotes have been determined. The classification of a wide variety of plasmids is not only important to understand their features, host ranges, and microbial evolution but is also necessary to effectively use them as genetic tools for microbial engineering. This review summarizes the current situation of the classification of fully sequenced plasmids based on their host taxonomy and their features of replication and conjugative transfer. The majority of the fully sequenced plasmids are found in bacteria in the Proteobacteria, Firmicutes, Spirochaetes, Actinobacteria, Cyanobacteria and Euryarcheota phyla, and key features of each phylum are included. Recent advances in the identification of novel types of plasmids and plasmid transfer by culture-independent methods using samples from natural environments are also discussed.

Small-plasmid-mediated antibiotic resistance is enhanced by increases in plasmid copy number and bacterial fitness

Plasmids play a key role in the horizontal spread of antibiotic resistance determinants among bacterial pathogens. When an antibiotic resistance plasmid arrives in a new bacterial host, it produces a fitness cost, causing a competitive disadvantage for the plasmid-bearing bacterium in the absence of antibiotics. On the other hand, in the presence of antibiotics, the plasmid promotes the survival of the clone. The adaptations experienced by plasmid and bacterium in the presence of antibiotics during the first generations of coexistence will be crucial for the progress of the infection and the maintenance of plasmid-mediated resistance once the treatment is over. Here we developed a model system using the human pathogen Haemophilus influenzae carrying the small plasmid pB1000 conferring resistance to β-lactam antibiotics to investigate host and plasmid adaptations in the course of a simulated ampicillin therapy. Our results proved that plasmid-bearing clones compensated for the fitness disadvantage during the first 100 generations of plasmid-host adaptation. In addition, ampicillin treatment was associated with an increase in pB1000 copy number. The augmentation in both bacterial fitness and plasmid copy number gave rise to H. influenzae populations with higher ampicillin resistance levels. In conclusion, we show here that the modulations in bacterial fitness and plasmid copy number help a plasmid-bearing bacterium to adapt during antibiotic therapy, promoting both the survival of the host and the spread of the plasmid.

IncP-1 and PromA group plasmids are major providers of horizontal gene transfer capacities across bacteria in the mycosphere of different soil fungi

Plasmids of the IncP-1β group have been found to be important carriers of accessory genes that enhance the ecological fitness of bacteria, whereas plasmids of the PromA group are key agents of horizontal gene transfer in particular soil settings. However, there is still a paucity of knowledge with respect to the diversity, abundance, and involvement in horizontal gene transfer of plasmids of both groups in the mycosphere. Using triparental exogenous isolation based on the IncQ tracer plasmid pSUP104 as well as direct molecular detection, we analyzed the pool of mobilizer and self-transferable plasmids in mycosphere soil. Replicate mushroom types that were related to Russula, Inocybe, Ampulloclitocybe, and Galerina spp. were sampled from a forest soil area, and bulk soil was used as the control. The data showed that the levels of IncP-1β plasmids are significantly raised across several of the mycospheres analyzed, whereas those of PromA group plasmids were similar across the mycospheres and corresponding bulk soil. Moreover, the frequencies of triparental exogenous isolation of mobilizer plasmids into a Pseudomonas fluorescens recipient strain were significantly elevated in communities from several mycospheres as compared with those from bulk soil. Molecular analysis of selected transconjugants, as well as from directly isolated strains, revealed the presence of plasmids of three size groups, i.e., (1) 40-45, (2) 50-60, and (3) ≥60 kb, across all isolations. Replicon typing using IncN, IncW and IncA/C proxies revealed no positive signals. In contrast, a suite of plasmids produced signals with IncP-1β as well as PromA type replicon typing systems. Moreover, a selected subset of plasmids, obtained from the Inocybe and Galerina isolates, was transferred out further, revealing their capacities to transfer and mobilize across a broad host range.

Plasmid flux in Escherichia coli ST131 sublineages, analyzed by plasmid constellation network (PLACNET), a new method for plasmid reconstruction from whole genome sequences

Bacterial whole genome sequence (WGS) methods are rapidly overtaking classical sequence analysis. Many bacterial sequencing projects focus on mobilome changes, since macroevolutionary events, such as the acquisition or loss of mobile genetic elements, mainly plasmids, play essential roles in adaptive evolution. Existing WGS analysis protocols do not assort contigs between plasmids and the main chromosome, thus hampering full analysis of plasmid sequences. We developed a method (called plasmid constellation networks or PLACNET) that identifies, visualizes and analyzes plasmids in WGS projects by creating a network of contig interactions, thus allowing comprehensive plasmid analysis within WGS datasets. The workflow of the method is based on three types of data: assembly information (including scaffold links and coverage), comparison to reference sequences and plasmid-diagnostic sequence features. The resulting network is pruned by expert analysis, to eliminate confounding data, and implemented in a Cytoscape-based graphic representation. To demonstrate PLACNET sensitivity and efficacy, the plasmidome of the Escherichia coli lineage ST131 was analyzed. ST131 is a globally spread clonal group of extraintestinal pathogenic E. coli (ExPEC), comprising different sublineages with ability to acquire and spread antibiotic resistance and virulence genes via plasmids. Results show that plasmids flux in the evolution of this lineage, which is wide open for plasmid exchange. MOB_F12/IncF plasmids were pervasive, adding just by themselves more than 350 protein families to the ST131 pangenome. Nearly 50% of the most frequent γ–proteobacterial plasmid groups were found to be present in our limited sample of ten analyzed ST131 genomes, which represent the main ST131 sublineages.

Plasmids are difficult to analyze in WGS datasets, due to the fragmented nature of the obtained sequences. We developed a method, called PLACNET, which greatly facilitates this analysis. As an example, we analyzed the plasmidome of E. coli ST131, an ExPEC clonal group involved in human urinary tract infections and septicemia. Relevant variation within this clone (e.g., antibiotic resistance and virulence) is frequently caused by the acquisition and loss of plasmids and other mobile genetic elements. Nevertheless, our knowledge of the ST131 plasmidome is limited to a few antibiotic resistance plasmids and to identification of replicons from known plasmid groups. PLACNET analysis extends the number of sequenced plasmids in ST131, which can be used for comparative genomics, from 11 to 50. The ST131 plasmidome is seemingly huge, encompassing roughly 50% of the main plasmid groups of γ–proteobacteria. MOB_F12/IncF plasmids are apparently the most active players in the dissemination of relevant genetic information.

Degenerate primer MOB typing of multiresistant clinical isolates of E. coli uncovers new plasmid backbones

Degenerate Primer MOB Typing is a PCR-based protocol for the classification of γ-proteobacterial transmissible plasmids in five phylogenetic relaxase MOB families. It was applied to a multiresistant E. coli collection, previously characterized by PCR-based replicon-typing, in order to compare both methods. Plasmids from 32 clinical isolates of multiresistant E. coli (19 extended spectrum beta-lactamase producers and 13 non producers) and their transconjugants were analyzed. A total of 95 relaxases were detected, at least one per isolate, underscoring the high potential of these strains for antibiotic-resistance transmission. MOBP12 and MOBF12 plasmids were the most abundant. Most MOB subfamilies detected were present in both subsets of the collection, indicating a shared mobilome among multiresistant E. coli. The plasmid profile obtained by both methods was compared, which provided useful data upon which decisions related to the implementation of detection methods in the clinic could be based. The phylogenetic depth at which replicon and MOB-typing classify plasmids is different. While replicon-typing aims at plasmid replication regions with non-degenerate primers, MOB-typing classifies plasmids into relaxase subfamilies using degenerate primers. As a result, MOB-typing provides a deeper phylogenetic depth than replicon-typing and new plasmid groups are uncovered. Significantly, MOB typing identified 17 plasmids and an integrative and conjugative element, which were not detected by replicon-typing. Four of these backbones were different from previously reported elements.

Plasmid Diversity and Adaptation Analyzed by Massive Sequencing of Escherichia coli Plasmids

Whole-genome sequencing is revolutionizing the analysis of bacterial genomes. It leads to a massive increase in the amount of available data to be analyzed. Bacterial genomes are usually composed of one main chromosome and a number of accessory chromosomes, called plasmids. A recently developed methodology called PLACNET (for pla smid c onstellation net works) allows the reconstruction of the plasmids of a given genome. Thus, it opens an avenue for plasmidome analysis on a global scale. This work reviews our knowledge of the genetic determinants for plasmid propagation (conjugation and related functions), their diversity, and their prevalence in the variety of plasmids found by whole-genome sequencing. It focuses on the results obtained from a collection of 255 Escherichia coli plasmids reconstructed by PLACNET. The plasmids found in E. coli represent a nonaleatory subset of the plasmids found in proteobacteria. Potential reasons for the prevalence of some specific plasmid groups will be discussed and, more importantly, additional questions will be posed.

First report of a clinical, multidrug-resistant Enterobacteriaceae isolate coharboring fosfomycin resistance gene fosA3 and carbapenemase gene blaKPC-2 on the same transposon, Tn1721

In order to understand the genetic background and dissemination mechanism of carbapenem resistance and fosfomycin resistance in Enterobacteriaceae isolates, we studied a clinical Escherichia coli strain HS102707 isolate and an Enterobacter aerogenes strain HS112625 isolate, both of which were resistant to carbapenem and fosfomycin and positive for the bla(KPC-2) and fosA3 genes. In addition, a clinical Klebsiella pneumoniae strain HS092839 isolate which was resistant to carbapenem was also studied. A 70-kb plasmid was successfully transferred to recipient E. coli J53 by a conjugation test. PCR and Southern blot analysis showed that bla(KPC-2) was located on this plasmid. The complete sequence of pHS102707 showed that this plasmid belongs to the P11 subfamily (IncP1) and has a replication gene, several plasmid-stable genes, an intact type IV secretion system gene cluster, and a composite transposon Tn1721-Tn3 that harbored bla(KPC-2). Interestingly, a composite IS26 transposon carrying fosA3 was inserted in the Tn1721-tnpA gene in pHS102707 and pHS112625, leading to the disruption of Tn1721-tnpA and the deletion of Tn1721-tnpR. However, only IS26 with a truncated Tn21-tnpR was inserted in pHS092839 at the same position. To our knowledge, this is the first report of fosA3 and bla(KPC-2) colocated in the same Tn1721-Tn3-like composite transposon on a novel IncP group plasmid.

Ordering the bestiary of genetic elements transmissible by conjugation

Phylogenetic reconstruction of three highly conserved proteins involved in bacterial conjugation (relaxase, coupling protein and a type IV secretion system ATPase) allowed the classification of transmissible elements in relaxase MOB families and mating pair formation MPF groups. These evolutionary studies point to the existence of a limited number of module combinations in transmissible elements, preferentially associated with specific genetic or environmental backgrounds. A practical protocol based on the MOB classification was implemented to detect and assort transmissible plasmids and integrative elements from γ-Proteobacteria. It was called “Degenerate Primer MOB Typing” or DPMT. It resulted in a powerful technique that discovers not only backbones related to previously classified elements (typically by PCR-based replicon typing or PBRT), but also distant new members sharing a common evolutionary ancestor. The DPMT method, conjointly with PBRT, promises to be useful to gain information on plasmid backbones and helpful to investigate the dissemination routes of transmissible elements in microbial ecosystems.

Positive selection and compensatory adaptation interact to stabilize non-transmissible plasmids

Plasmids are important drivers of bacterial evolution, but it is challenging to understand how plasmids persist over the long term because plasmid carriage is costly. Classical models predict that horizontal transfer is necessary for plasmid persistence, but recent work shows that almost half of plasmids are non-transmissible. Here we use a combination of mathematical modelling and experimental evolution to investigate how a costly, non-transmissible plasmid, pNUK73, can be maintained in populations of Pseudomonas aeruginosa. Compensatory adaptation increases plasmid stability by eliminating the cost of plasmid carriage. However, positive selection for plasmid-encoded antibiotic resistance is required to maintain the plasmid by offsetting reductions in plasmid frequency due to segregational loss. Crucially, we show that compensatory adaptation and positive selection reinforce each other’s effects. Our study provides a new understanding of how plasmids persist in bacterial populations, and it helps to explain why resistance can be maintained after antibiotic use is stopped.

Plasmids are important for bacterial evolution but the evolutionary mechanisms behind their maintenance are unclear. Here the authors show that the interplay between compensatory adaptation and positive selection for plasmid-encoded antibiotic resistance determines plasmid persistence in P. aeruginosa.

Mobilizable Rolling-Circle Replicating Plasmids from Gram-Positive Bacteria: A Low-Cost Conjugative Transfer

Conjugation is a key mechanism for horizontal gene transfer in bacteria. Some plasmids are not self-transmissible but can be mobilized by functions encoded in trans provided by other auxiliary conjugative elements. Although the transfer efficiency of mobilizable plasmids is usually lower than that of conjugative elements, mobilizable plasmidsare more frequently found in nature. In this sense, replication and mobilization can be considered as important mechanisms influencing plasmid promiscuity. Here we review the present available information on two families of small mobilizable plasmids from Gram-positive bacteria that replicate via the rolling-circle mechanism. One of these families, represented by the streptococcal plasmid pMV158, is an interesting model since it contains a specific mobilization module (MOB_V) that is widely distributed among mobilizable plasmids. We discuss a mechanism in which the promiscuity of the pMV158 replicon is based on the presence of two origins of lagging strand synthesis. The current strategies to assess plasmid transfer efficiency as well as to inhibit conjugative plasmid transfer are presented. Some applications of these plasmids as biotechnological tools are also reviewed.

An improved method for including upper size range plasmids in metamobilomes

Two recently developed isolation methods have shown promise when recovering pure community plasmid DNA (metamobilomes/plasmidomes), which is useful in conducting culture-independent investigations into plasmid ecology. However, both methods employ multiple displacement amplification (MDA) to ensure suitable quantities of plasmid DNA for high-throughput sequencing. This study demonstrates that MDA greatly favors smaller circular DNA elements (<10 Kbp), which, in turn, leads to stark underrepresentation of upper size range plasmids (>10 Kbp). Throughout the study, we used two model plasmids, a 4.4 Kbp cloning vector (pBR322), and a 56 Kbp conjugative plasmid (pKJK10), to represent lower- and upper plasmid size ranges, respectively. Subjecting a mixture of these plasmids to the overall isolation protocol revealed a 34-fold over-amplification of pBR322 after MDA. To address this bias, we propose the addition of an electroelution step that separates different plasmid size ranges prior to MDA in order to reduce size-dependent competition during incubation. Subsequent analyses of metamobilome data from wastewater spiked with the model plasmids showed in silica recovery of pKJK10 to be very poor with the established method and a 1,300-fold overrepresentation of pBR322. Conversely, complete recovery of pKJK10 was enabled with the new modified protocol although considerable care must be taken during electroelution to minimize cross-contamination between samples. For further validation, non-spiked wastewater metamobilomes were mapped to more than 2,500 known plasmid genomes. This displayed an overall recovery of plasmids well into the upper size range (median size: 30 kilobases) with the modified protocol. Analysis of de novo assembled metamobilome data also suggested distinctly better recovery of larger plasmids, as gene functions associated with these plasmids, such as conjugation, was exclusively encoded in the data output generated through the modified protocol. Thus, with the suggested modification, access to a large uncharacterized pool of accessory elements that reside on medium-to-large plasmids has been improved.

In silico detection and typing of plasmids using PlasmidFinder and plasmid multilocus sequence typing

In the work presented here, we designed and developed two easy-to-use Web tools for in silico detection and characterization of whole-genome sequence (WGS) and whole-plasmid sequence data from members of the family Enterobacteriaceae. These tools will facilitate bacterial typing based on draft genomes of multidrug-resistant Enterobacteriaceae species by the rapid detection of known plasmid types. Replicon sequences from 559 fully sequenced plasmids associated with the family Enterobacteriaceae in the NCBI nucleotide database were collected to build a consensus database for integration into a Web tool called PlasmidFinder that can be used for replicon sequence analysis of raw, contig group, or completely assembled and closed plasmid sequencing data. The PlasmidFinder database currently consists of 116 replicon sequences that match with at least at 80% nucleotide identity all replicon sequences identified in the 559 fully sequenced plasmids. For plasmid multilocus sequence typing (pMLST) analysis, a database that is updated weekly was generated from www.pubmlst.org and integrated into a Web tool called pMLST. Both databases were evaluated using draft genomes from a collection of Salmonella enterica serovar Typhimurium isolates. PlasmidFinder identified a total of 103 replicons and between zero and five different plasmid replicons within each of 49 S. Typhimurium draft genomes tested. The pMLST Web tool was able to subtype genomic sequencing data of plasmids, revealing both known plasmid sequence types (STs) and new alleles and ST variants. In conclusion, testing of the two Web tools using both fully assembled plasmid sequences and WGS-generated draft genomes showed them to be able to detect a broad variety of plasmids that are often associated with antimicrobial resistance in clinically relevant bacterial pathogens.

Complete nucleotide sequence of two multidrug-resistant IncR plasmids from Klebsiella pneumoniae

We report here the complete nucleotide sequence of two IncR replicons encoding multidrug resistance determinants, including β-lactam (blaDHA-1, blaSHV-12), aminoglycoside (aphA1, strA, strB), and fluoroquinolone (qnrB4, aac6'-1b-cr) resistance genes. The plasmids have backbones that are similar to each other, including the replication and stability systems, and contain a wide variety of transposable elements carrying known antibiotic resistance genes. This study confirms the increasing clinical importance of IncR replicons as resistance gene carriers.

The complete nucleotide sequence of the carbapenem resistance-conferring conjugative plasmid pLD209 from a Pseudomonas putida clinical strain reveals a chimeric design formed by modules derived from both environmental and clinical bacteria

The complete sequence of the carbapenem-resistance-conferring conjugative plasmid pLD209 from a Pseudomonas putida clinical strain is presented. pLD209 is formed by 3 well-defined regions: an adaptability module encompassing a Tn402-like class 1 integron of clinical origin containing blaVIM-2 and aacA4 gene cassettes, partitioning and transfer modules, and a replication module derived from plasmids of environmental bacteria. pLD209 is thus a mosaic of modules originating in both the clinical and environmental (nonclinical) microbiota.

Plasmids and the spread of resistance

Plasmids represent one of the most difficult challenge for counteracting the dissemination of antimicrobial resistance. They contribute to the spread of relevant resistance determinants, promoting horizontal gene transfer among unrelated bacteria. Undistinguishable plasmids were identified in unrelated bacterial strains isolated at huge geographically distant area, with no apparent epidemiological links. These plasmids belong to families that are largely prevalent in naturally occurring bacteria, usually carry multiple physically linked genetic determinants, conferring resistance to different classes of antibiotics simultaneously. Plasmids also harbour virulence factors and addiction systems, promoting their stability and maintenance in the bacterial host, in different environmental conditions. The characteristics of the most successful plasmids that were at the origin of the spread of carbapenemase, expanded-spectrum β-lactamase, and plasmid-mediated quinolone resistance genes are discussed in this review.