Torsion and antero-posterior bending in the in vivo human tibia loading regimes during walking and running

Microhardness distribution of the tibial diaphysis and test site selection for reference point indentation technique

Indentation hardness test is a good in vitro method of bone quality assessment. The purpose of this study is to explore the distribution characteristics of bone tissue microhardness in tibial diaphysis and provide theoretical support for the test site selection of the reference point indentation technique.Three fresh right tibias were obtained from 3 cadaver donors. The tibial diaphysis was evenly divided into 6 sections. Bone specimens with a thickness of 3 mm were cut from each part. After appropriate management, micro-indentation tests were performed in various regions of the specimens to acquire the microhardness values of the tibial diaphysis. Statistical analysis was performed by randomized block design variance analysis to study the distribution characteristics of bone microhardness.72 regions were selected for 360 effective indentations. We found that the bone microhardness is inhomogeneous in tibia diaphysis. Mean hardness value of the anterior, medial, posterior, lateral region of tibia diaphysis was 45.58 ± 4.39 Vickers hardness (HV), 52.33 ± 3.93 HV, 54.00 ± 4.21 HV, 52.89 ± 4.44 HV, respectively. The anterior cortex exhibits lower microhardness value than the other regions (P < .001). Within the same region, microhardness varies significantly with positions in the tibial diaphysis. The variations in indentation hardness are bound to have a significant impact on the comparability of different reference point indentation (RPI) studies.The results of this study indicated the regional microhardness difference in the human tibia diaphysis. The microhardness of different planes in the same region is also inconsistent. Inhomogeneous distribution of indentation microhardness would have considerable influence in the test site selection of RPI technique. The data collected in our study would contribute to the design of highly precise 3D printing implants and bionic bones with gradient elastic modulus.

Effects of varus knee alignment on gait biomechanics and lower limb muscle activity in boys: A cross sectional study

BACKGROUND

There is evidence that frontal plane lower limb malalignment (e.g., genu varus) is a risk factor for knee osteoarthritis development. However, only scarce information is available on gait biomechanics and muscle activity in boys with genu varus.

RESEARCH QUESTION

To examine the effects of knee varus alignment on lower limb kinematics, kinetics and muscular activity during walking at self-selected speed in boys with genu varus versus healthy age-matched controls.

METHODS

Thirty-six boys were enrolled in this study and divided into a group of boys with genu varus (n = 18; age: 11.66 ± 1.64 years) and healthy controls (n = 18; age: 11.44 ± 1.78 years). Three-dimensional kinematics, ground reaction forces, loading rates, impulses and free moments of both limbs were recorded during five walking trials at self-selected speed. Surface electromyography was recorded for rectus femoris and vastus lateralis/medialis muscles.

RESULTS

No significant between-group differences were found for gait speed. Participants in the genu varus group versus controls showed larger peak knee flexion (p = 0.030; d = 0.77), peak knee adduction (p < 0.001; d = 1.63), and peak ankle eversion angles (p < 0.001; d = 2.06). Significantly higher peak ground reaction forces were found at heel contact (vertical [p = 0.002; d = 1.16] and posterior [p < 0.001; d = 1.63] components) and at push off (vertical [p = 0.010; d = 0.93] and anterior [p < 0.001; d = 1.34] components) for genu varus versus controls. Peak medial ground reaction force (p = 0.032; d = 0.76), vertical loading rate (p < 0.001; d = 1.52), anterior-posterior impulse (p = 0.011; d = 0.92), and peak negative free moment (p = 0.030; d = 0.77) were significantly higher in genu varus. Finally, time to reach peak forces was significantly shorter in genu varus boys compared with healthy controls (p < 0.01; d = 0.73-1.60). The genu varus group showed higher activities in vastus lateralis (p < 0.001; d = 1.82) and vastus medialis (p = 0.013; d = 0.90) during the loading phase of walking.

SIGNIFICANCE

Our study revealed genu varus specific gait characteristics and muscle activities. Greater knee adduction angle in genu varus boys may increase the load on the medial compartment of the knee joint. The observed characteristics in lower limb biomechanics and muscle activity could play a role in the early development of knee osteoarthritis in genu varus boys.

Exploring conditions that make cortical bone geometry optimal for physiological loading

While physiological loading on lower long bones changes during bone development, the bone cross section either remains circular or slowly changes from nearly circular to other shapes such as oval and roughly triangular. Bone is said to be an optimal structure, where strength is maximized using the optimal distribution of bone mass (also called Wolff's law). One of the most appropriate mathematical validations of this law would be a structural optimization-based formulation where total strain energy is minimized against a mass and a space constraint. Assuming that the change in cross section during bone development and homeostasis after adulthood is direct result of the change in physiological loading, this work investigates what optimization problem formulation (collectively, design variables, objective function, constraints, loading conditions, etc.) results in mathematically optimal solutions that resemble bones under actual physiological loading. For this purpose, an advanced structural optimization-based computational model for cortical bone development and defect repair is presented. In the optimization problem, overall bone stiffness is maximized first against a mass constraint, and then also against a polar first moment of area constraint that simultaneously constrains both mass and space. The investigation is completed in two stages. The first stage is developmental stage when physiological loading on lower long bones (tibia) is a random combination of axial, bending and torsion. The topology optimization applied to this case with the area moment constraint results into circular and elliptical cross sections similar to that found in growing mouse or human. The second investigation stage is bone homeostasis reached in adulthood when the physiological loading has a fixed pattern. A drill hole defect is applied to the adult mouse bone, which would disrupt the homeostasis. The optimization applied after the defect interestingly brings the damaged section back to the original intact geometry. The results, however, show that cortical bone geometry is optimal for the physiological loading only when there is also a constraint on polar moment of area. Further numerical experiments show that application of torsion along with the gait-analysis-based physiological loading improves the results, which seems to indicate that the cortical bone geometry is optimal for some amount of torsion in addition to the gait-based physiological loading. This work has a potential to be extended to bone growth/development models and fracture healing models, where topology optimization and polar moment of area constraint have not been introduced earlier.

Hopping in hypogravity-A rationale for a plyometric exercise countermeasure in planetary exploration missions

Moon and Mars are considered to be future targets for human space explorations. The gravity level on the Moon and Mars amount to 16% and 38%, respectively, of Earth’s gravity. Mechanical loading during the anticipated habitual activities in these hypogravity environments will most likely not be sufficient to maintain physiological integrity of astronauts unless additional exercise countermeasures are performed. Current microgravity exercise countermeasures appear to attenuate but not prevent ‘space deconditioning’. However, plyometric exercises (hopping and whole body vibration) have shown promise in recent analogue bed rest studies and may be options for space exploration missions where resources will be limited compared to the ISS. This paper therefore tests the hypothesis that plyometric hop exercise in hypogravity can generate sufficient mechanical stimuli to prevent musculoskeletal deconditioning. It has been suggested that hypogravity-induced reductions in peak ground reaction force (peak vertical GRF) can be offset by increases in hopping height. Therefore, this study investigated the effects of simulated hypogravity (0.16G, 0.27G, 0.38G, and 0.7G) upon sub-maximal plyometric hopping on the Verticalised Treadmill Facility, simulating different hypogravity levels. Results show that peak vertical GRF are negatively related to simulated gravity level, but positively to hopping height. Contact times decreased with increasing gravity level but were not influenced through hopping height. In contrast, flight time increased with decreasing gravity levels and increasing hopping height (P < 0.001). The present data suggest that the anticipated hypogravity-related reductions of musculoskeletal forces during normal walking can be compensated by performing hops and therefore support the idea of plyometric hopping as a robust and resourceful exercise countermeasure in hypogravity. As maximal hop height was constrained on the VTF further research is needed to determine whether similar relationships are evident during maximal hops and other forms of jumping.

Torsion - an underestimated form shaping entity in bone adaptation?

OBJECTIVES

There is ample agreement that the specific shape of a bone is related to the loads it has to carry. It is also believed that bones mechano-adapt in order to 'find' this shape. The open question is which signals constitute the determinants of this adapation. Recent in vivo experiments show that torsion is a significant load component in human tibia, and a computational study of the mechanostat has indicated that torsion could play a role in the shaping of tubular long bones.

METHODS

An earlier computational approach is further progressed to systematically study the relative importance of axial compression, lateral bending and axial torsion.

RESULTS

Results demonstrate that shape-driving potential towards tubular shapes is greatest for torsion, followed by bending and least for axial compression. Multiple linear regression analysis confirmed the dominant role of torsion, in particular for the 2nd moment of intertia. The obtained results were largely unaffected by starting conditions, e.g. either from a grid or through reshaping under disuse.

CONCLUSIONS

Strong support has been found for the hypothesis torsion could be more important than suggested in previous studies as a component of the mechanical environment of bones. This will apply to the shafts of long bones, and also to the femoral neck.

Cancellous bone and theropod dinosaur locomotion. Part I-an examination of cancellous bone architecture in the hindlimb bones of theropods

This paper is the first of a three-part series that investigates the architecture of cancellous ('spongy') bone in the main hindlimb bones of theropod dinosaurs, and uses cancellous bone architectural patterns to infer locomotor biomechanics in extinct non-avian species. Cancellous bone is widely known to be highly sensitive to its mechanical environment, and has previously been used to infer locomotor biomechanics in extinct tetrapod vertebrates, especially primates. Despite great promise, cancellous bone architecture has remained little utilized for investigating locomotion in many other extinct vertebrate groups, such as dinosaurs. Documentation and quantification of architectural patterns across a whole bone, and across multiple bones, can provide much information on cancellous bone architectural patterns and variation across species. Additionally, this also lends itself to analysis of the musculoskeletal biomechanical factors involved in a direct, mechanistic fashion. On this premise, computed tomographic and image analysis techniques were used to describe and analyse the three-dimensional architecture of cancellous bone in the main hindlimb bones of theropod dinosaurs for the first time. A comprehensive survey across many extant and extinct species is produced, identifying several patterns of similarity and contrast between groups. For instance, more stemward non-avian theropods (e.g. ceratosaurs and tyrannosaurids) exhibit cancellous bone architectures more comparable to that present in humans, whereas species more closely related to birds (e.g. paravians) exhibit architectural patterns bearing greater similarity to those of extant birds. Many of the observed patterns may be linked to particular aspects of locomotor biomechanics, such as the degree of hip or knee flexion during stance and gait. A further important observation is the abundance of markedly oblique trabeculae in the diaphyses of the femur and tibia of birds, which in large species produces spiralling patterns along the endosteal surface. Not only do these observations provide new insight into theropod anatomy and behaviour, they also provide the foundation for mechanistic testing of locomotor hypotheses via musculoskeletal biomechanical modelling.

The application of finite element modelling based on clinical pQCT for classification of fracture status

Fracture risk assessment using dual-energy X-ray absorptiometry (DXA) frequently fails to diagnose osteoporosis amongst individuals who later experience fragility fractures. Hence, more reliable techniques that improve the prediction of fracture risk are needed. In this study, we evaluated a finite element (FE) modelling framework based on clinical peripheral quantitative computed tomography (pQCT) imaging of the tibial epiphysis and diaphysis to predict the stiffness at these locations in compression, shear, torsion and bending. The ability of these properties to identify a group of women who had recently sustained a low-trauma fracture from an age- and weight-matched control group was determined and compared to clinical pQCT and DXA properties and structural properties based on composite beam theory. The predicted stiffnesses derived from the FE models and composite beam theory were significantly different (p < 0.05) between the control and fracture groups, whereas no meaningful differences were observed using DXA and for the stress-strain indices (SSIs) derived using pQCT. The diagnostic performance of each property was assessed by the odds ratio (OR) and the area under the receiver operating curve (AUC), and both were greatest for the FE-predicted shear stiffness (OR 16.09, 95% CI 2.52-102.56, p = 0.003) (AUC: 0.80, 95% CI 0.67-0.93). The clinical pQCT variable total density (ρ_tot) and a number of structural and FE-predicted variables had a similar probability of correct classification between the control and fracture groups (i.e. ORs and AUCs with mean values greater than 5.00 and 0.80, respectively). In general, the diagnostic characteristics were lower for variables derived using DXA and for the SSIs (i.e. ORs and AUCs with mean values of 1.65-2.98 and 0.64-0.71, respectively). For all properties considered, the trabecular-dominant tibial epiphysis exhibited enhanced classification characteristics, as compared to the cortical-dominant tibial diaphysis. The results of this study demonstrate that bone properties may be derived using FE modelling that have the potential to enhance fracture risk assessment using conventional pQCT or DXA instruments in clinical settings.

Exercise Early and Often: Effects of Physical Activity and Exercise on Women's Bone Health

In 2011 over 1.7 million people were hospitalized because of a fragility fracture, and direct costs associated with osteoporosis treatment exceeded 70 billion dollars in the United States. Failure to reach and maintain optimal peak bone mass during adulthood is a critical factor in determining fragility fracture risk later in life. Physical activity is a widely accessible, low cost, and highly modifiable contributor to bone health. Exercise is especially effective during adolescence, a time period when nearly 50% of peak adult bone mass is gained. Here, we review the evidence linking exercise and physical activity to bone health in women. Bone structure and quality will be discussed, especially in the context of clinical diagnosis of osteoporosis. We review the mechanisms governing bone metabolism in the context of physical activity and exercise. Questions such as, when during life is exercise most effective, and what specific types of exercises improve bone health, are addressed. Finally, we discuss some emerging areas of research on this topic, and summarize areas of need and opportunity.

The free moment is associated with torsion between the pelvis and the foot during gait

BACKGROUND

During walking, the friction between the foot and the ground surface causes a free moment (FM), which influences the torsional stress on the lower extremity. However, few studies have investigated the FM during natural walking. The main aim of this study was to examine the relationship between the FM and the absolute and relative rotation angles of the foot and pelvis.

METHODS

The rotation angles of foot and pelvic were measured in 18 healthy men using a motion capture system. Rotation angles were measured in absolute and relative coordinates as well as in reference to the line connecting the center of pressure (CoP) line under the right and left feet to evaluate the effects of the opposite lower limb on the FM. The absolute and relative rotation angles of the foot and pelvis were entered into forced-entry linear regression models to evaluate the influence on the FM.

FINDINGS

Only the relative angle of rotation between the foot and pelvis could explain the prediction equations significantly. In the Pearson's product-moment correlation coefficient, the rotation angles of the foot and pelvis defined using the bilateral CoP points had not significantly correlated with FM. No joint rotation movement was correlated with FM.

INTERPRETATION

The torsion of the entire lower extremity should be performed principally through hip internal rotation. When evaluating the FM as a torsional stress, focusing on the rotation of the entire lower extremity, rather than on one segment, is beneficial.

Mechanical basis of bone strength: influence of bone material, bone structure and muscle action

This review summarises current understanding of how bone is sculpted through adaptive processes, designed to meet the mechanical challenges it faces in everyday life and athletic pursuits, serving as an update for clinicians, researchers and physical therapists. Bone's ability to resist fracture under the large muscle and locomotory forces it experiences during movement and in falls or collisions is dependent on its established mechanical properties, determined by bone's complex and multidimensional material and structural organisation. At all levels, bone is highly adaptive to habitual loading, regulating its structure according to components of its loading regime and mechanical environment, inclusive of strain magnitude, rate, frequency, distribution and deformation mode. Indeed, the greatest forces habitually applied to bone arise from muscular contractions, and the past two decades have seen substantial advances in our understanding of how these forces shape bone throughout life. Herein, we also highlight the limitations of in vivo methods to assess and understand bone collagen, and bone mineral at the material or tissue level. The inability to easily measure or closely regulate applied strain in humans is identified, limiting the translation of animal studies to human populations, and our exploration of how components of mechanical loading regimes influence mechanoadaptation.

Exercise for osteoporosis: how to navigate between overeagerness and defeatism

Osteoporosis and associated fractures remain a common and costly health problem. Public fears about rare side effects of efficacious drug treatments for osteoporosis have contributed to decreased prescription and compliance. Exercise and physical activity-based interventions have long been proposed as an alternative treatment for osteoporosis. However despite compelling evidence from experimental studies in animals and from observational studies in humans, the use of exercise to improve bone mass in clinical practice does not seem to be justifiable by current human interventional studies. In this perspective, we summarise the available evidence in support of exercise on bone mass. We review the modest effects observed in current exercise trials, and propose a number of factors which may contribute to these discrepancies. We also highlight the successful application of exercise to attenuating or even partially reversing bone loss in musculoskeletal disuse. We then propose how collaboration between basic science and clinical partners, and consideration of factors such as exercise modality, exercise intensity and participation motivation could improve exercise efficacy.

A novel interpolation approach for the generation of 3D-geometric digital bone models from image stacks

The authors propose a new 3D interpolation algorithm for the generation of digital geometric 3D-models of bones from existing image stacks obtained by peripheral Quantitative Computed Tomography (pQCT) or Magnetic Resonance Imaging (MRI). The technique is based on the interpolation of radial gray value profiles of the pQCT cross sections. The method has been validated by using an ex-vivo human tibia and by comparing interpolated pQCT images with images from scans taken at the same position. A diversity index of ⟨0.4 (1 meaning maximal diversity) even for the structurally complex region of the epiphysis, along with the good agreement of mineral-density-weighted cross-sectional moment of inertia (CSMI), demonstrate the high quality of our interpolation approach. Thus the authors demonstrate that this interpolation scheme can substantially improve the generation of 3D models from sparse scan sets, not only with respect to the outer shape but also with respect to the internal gray-value derived material property distribution.

TECHNOLOGIES FOR STRAIN ASSESSMENT FROM WHOLE BONE TO MINERALIZED OSTEOID LEVEL: A CRITICAL REVIEW

Bone has distinctive structures and mechanical properties at the whole bone, perilacunar and mineralized osteoid levels. A systematic understanding of bone strain magnitudes at different anatomical levels and their internal interactions is the prerequisite to advances in bone mechanobiology. However, due to the intrinsic shortcomings of the strain-measuring technologies, the systematic assessment of bone strain at different anatomical levels under physiological conditions and a deep understanding of their internal interactions are still restricted. To promote technological advances and provide systematic and valuable information for mechanical engineers and bone biomechanical researchers, the most useful methods for measuring bone strain at different anatomical levels are demonstrated in this review, and suggestions for the future development of the technologies and their potential integrated applications are proposed.

Partial weight bearing of the tibia

INTRODUCTION

Partial weight bearing is part of treatment schemes in orthopedic surgery and traumatology. The aim of the present study was to explore to what degree ground reaction forces during partial weight bearing of the lower leg are related to given instructions and to tibia deformation.

MATERIALS AND METHODS

Tibia deformation (torsion, medio-lateral and anterio-posterior bending) was measured for rear foot and forefoot loading, 10kg, 20kg and half body weight instructions compared to full loading in five healthy male subjects using the "Optical Segment Tracking" approach, a motion-capturing based method that uses monocortically fixed bone screws.

RESULTS

1. Ground reaction force was a good indicator of tibia deformation. 2. Participants significantly under-loaded during half-body weight instructions (P<0.001) while they overloaded when loading the forefoot only. 3. Partial-loading instructions led to a highly significant and systematic reduction in peak ground reaction force (GRFpk) in all three types of tibia deformation with substantial variation between measurements. 4. Forefoot usage was associated with significant, albeit moderate increases in GRFpk (P=0.0031), in AP-bending (P=0.0027) and in torsion (P<0.001), compared to rear foot loading.

DISCUSSION

These findings result in the following clinical "lessons learned": 1. GRF is a good reflection of loading-induced deformation of the tibia. 2. GRFs are hard to control by subjects/patients. 3. The expectation that forefoot-loading results in larger tibia deformation could not be confirmed in our study. 4. When aiming at a reduction in tibia deformation, rear-foot loading is more preferable than forefoot loading.

Increased density and periosteal expansion of the tibia in young adult men following short-term arduous training

PURPOSE

Few human studies have reported early structural adaptations of bone to weight-bearing exercise, which provide a greater contribution to improved bone strength than increased density. This prospective study examined site- and regional-specific adaptations of the tibia during arduous training in a cohort of male military (infantry) recruits to better understand how bone responds in vivo to mechanical loading.

METHODS

Tibial bone density and geometry were measured in 90 British Army male recruits (ages 21±3years, height: 1.78±0.06m, body mass: 73.9±9.8kg) in weeks 1 (Baseline) and 10 of initial military training. Scans were performed at the 4%, 14%, 38% and 66% sites, measured from the distal end plate, using pQCT (XCT2000L, Stratec Pforzheim, Germany). Customised software (BAMPack, L-3 ATI) was used to examine whole bone cross-section and regional sectors. T-tests determined significant differences between time points (P<0.05).

RESULTS

Bone density of trabecular and cortical compartments increased significantly at all measured sites. Bone geometry (cortical area and thickness) and bone strength (i, MMi and BSI) at the diaphyseal sites (38 and 66%) were also significantly higher in week 10. Regional changes in density and geometry were largely observed in the anterior, medial-anterior and anterior-posterior sectors. Calf muscle density and area (66% site) increased significantly at week 10 (P<0.01).

CONCLUSIONS

In vivo mechanical loading improves bone strength of the human tibia by increased density and periosteal expansion, which varies by site and region of the bone. These changes may occur in response to the nature and distribution of forces originating from bending, torsional and shear stresses of military training. These improvements are observed early in training when the osteogenic stimulus is sufficient, which may be close to the fracture threshold in some individuals.

Tibial Bone Strength is Enhanced in the Jump Leg of Collegiate-Level Jumping Athletes: A Within-Subject Controlled Cross-Sectional Study

An efficient method of studying skeletal adaptation to mechanical loading is to assess side-to-side differences (i.e., asymmetry) within individuals who unilaterally exercise one side of the body. Within-subject controlled study designs have been used to explore skeletal mechanoadaptation at upper extremity sites; however, there is no established model in the lower extremities. The current study assessed tibial diaphysis and distal tibia asymmetry in collegiate-level jumping athletes (N = 12). To account for normal crossed asymmetry, data in jumping athletes were compared to asymmetry in a cohort of athletic controls not routinely exposed to elevated unilateral lower extremity loading (N = 11). Jumpers exhibited side-to-side differences between their jump and lead legs at both the tibial diaphysis and distal tibia, with differences at the former site persisting following comparison to dominant-to-nondominant leg differences in controls. In particular, jump-to-lead leg differences for cortical area and thickness at the tibial diaphysis in jumpers were 3.6% (95% CI 0.5-6.8%) and 3.5% (95% CI 0.4-6.6%) greater than dominant-to-nondominant differences in controls, respectively (all p < 0.05). Similarly, jump-to-lead leg differences in jumpers for tibial diaphysis maximum second moment of area and polar moment of inertia were 7.2% (95% CI 1.2-13.2%) and 5.7% (95% CI 1.7-9.8%) greater than dominant-to-nondominant differences in controls, respectively (all p < 0.05). Assessment of region-specific differences of the tibial diaphysis in jumpers indicated that the jump leg had greater pericortical radii on the medial and posterior sides and greater radial cortical thickness posteromedially when compared to the lead leg. These data suggest that athletes who perform repetitive and forceful unilateral jumping may be a useful and efficient within-subject controlled model for studying lower extremity skeletal mechanoadaptation.

Tennis service stroke benefits humerus bone: is torsion the cause?

Regular tennis play is associated with impressive asymmetries in bone strength in favor of the racquet arm, particularly in the humerus. However, the relative effects of service and ground strokes are not known. Serendipitously, we encountered a 46-year-old regular tennis player who has played service and ground strokes with different arms for over 30 years, and thus allowed differentiation of stroke effects. Grip strength and peripheral quantitative computed tomography scans of both arms of radius at 4 % distal-proximal ulna length, radius and ulna at 60 % distal-proximal ulna length, and at distal (35 % length) humerus were analyzed in this player, and 12 male veteran players of similar age, height, and mass who played a conventional single-sided style. Confidence intervals (95 %) were calculated for asymmetries and bone, muscle and force parameters in the control players-values in the case study player were compared to these intervals. Sizeable differences in bone strength in favor of the serving arm humerus were observed in this player-comparable to those found in the control players. While asymmetries in favor of the ground stroke arm ulna were also evident, no sizeable asymmetry was found in proximal or distal radius, forearm or upper arm muscle size or hand grip force. These results suggest that the service stroke is responsible for the humeral hypertrophy observed in tennis players, and that ulna adaptation may be attributable to the ground strokes. The osteogenic potential of the service stroke may be related to the large torsional stresses it produces.

First Reported Cases of Biomechanically Adaptive Bone Modeling in Non-Avian Dinosaurs

Predator confrontation or predator evasion frequently produces bone fractures in potential prey in the wild. Although there are reports of healed bone injuries and pathologies in non-avian dinosaurs, no previously published instances of biomechanically adaptive bone modeling exist. Two tibiae from an ontogenetic sample of fifty specimens of the herbivorous dinosaur Maiasaura peeblesorum (Ornithopoda: Hadrosaurinae) exhibit exostoses. We show that these outgrowths are cases of biomechanically adaptive periosteal bone modeling resulting from overstrain on the tibia after a fibula fracture. Histological and biomechanical results are congruent with predictions derived from this hypothesis. Histologically, the outgrowths are constituted by radial fibrolamellar periosteal bone tissue formed at very high growth rates, as expected in a process of rapid strain equilibration response. These outgrowths show greater compactness at the periphery, where tensile and compressive biomechanical constraints are higher. Moreover, these outgrowths increase the maximum bending strength in the direction of the stresses derived from locomotion. They are located on the antero-lateral side of the tibia, as expected in a presumably bipedal one year old individual, and in the posterior position of the tibia, as expected in a presumably quadrupedal individual at least four years of age. These results reinforce myological evidence suggesting that Maiasaura underwent an ontogenetic shift from the primitive ornithischian bipedal condition when young to a derived quadrupedal posture when older.

Form follows function: a computational simulation exercise on bone shape forming and conservation

The present paper explores whether the shape of long bone shafts can be explained as a mere result of mechano-adapation. A computer simulation study was conducted in order to investigate adaptation processes of bone-like structures under load patterns comparable to those acting on the diaphysis of long bones. The aim of the study was to have a deeper look into the relationship between typical loading patterns and resulting bone shape and structure. The simulations are based on a mechanistic model approach for mechano-transduction and bone transformation. Results of the simulations are that axial torsion around the long axis is important for the evolvement and maintenance of tube-like structures. Of note such structures can form from a variety of starting geometries, provided that axial torsion is present. The selection of the set-point parameter for the regulation of load adapted bone transformation has an impact on the final structure as well. In conclusion, the present study confirms the mechanical environment's potential to generate shaft-like structures and demonstrates the respective boundary conditions.

Greater tibial bone strength in male tennis players than controls in the absence of greater muscle output

Background/Objective

The greatest forces experienced by bones result from muscular contractions—muscles produce most force in high-velocity eccentric contractions. Bouncing movements, e.g., sprinting or hopping—where such contractions occur—are highly beneficial for lower limb bones. However, there is a growing body of evidence that torsional stresses are highly osteogenic. Sports in which frequent quick turning occurs—hence large torsional stresses can be expected—e.g., tennis, may also improve bone strength even in the absence of large ground reaction and muscle forces.

Methods

To investigate the relative effects of bouncing and turning movements on bones, we recruited 47 older men (mean age 62.4 ± 12.9 years). They were competitive sprinters (representing exposure to bouncing movement), competitive tennis players (turning movements), and inactive controls. Peripheral quantitative computed tomography scans of tibial diaphysis at 66% distal–proximal length were taken; muscle sizes from peripheral quantitative computed tomography and countermovement jump performance were also examined.

Results

Bone strength of tennis players was clearly greater than that of controls (23% greater bone mass; p < 0.001) and similar to that in sprinters. Tennis players' jump relative power and height were 15% and 25% lower than those of sprinters (p < 0.05) and similar to control values, being 2% greater and 6% lower, respectively (p > 0.5). Material eccentricity analysis suggests that torsional stresses may be a significant adaptive stimulus to tibial bone.

Conclusion

Results suggest that sports with quick turning movements are highly osteogenic, even in the absence of greater muscular output. This may be related to the large torsional stresses produced during turning movements.

Analysis of the independent power of age-related, anthropometric and mechanical factors as determinants of the structure of radius and tibia in normal adults. A pQCT study

To compare the independent influence of mechanical and non-mechanical factors on bone features, multiple regression analyses were performed between pQCT indicators of radius and tibia bone mass, mineralization, design and strength as determined variables, and age or time since menopause (TMP), body mass, bone length and regional muscles' areas as selected determinant factors, in Caucasian, physically active, untrained healthy men and pre- and post-menopausal women. In men and pre-menopausal women, the strongest influences were exerted by muscle area on radial features and by both muscle area and bone length on the tibia. Only for women, was body mass a significant factor for tibia traits. In men and pre-menopausal women, mass/design/strength indicators depended more strongly on the selected determinants than the cortical vBMD did (p<0.01-0.001 vs n.s.), regardless of age. However, TMP was an additional factor for both bones (p<0.01-0.001). The selected mechanical factors (muscle size, bone lengths) were more relevant than age/TMP or body weight to the development of allometrically-related bone properties (mass/design/strength), yet not to bone tissue 'quality' (cortical vBMD), suggesting a determinant, rather than determined role for cortical stiffness. While the mechanical impacts of muscles and bone levers on bone structure were comparable in men and pre-menopausal women, TMP exerted a stronger impact than allometric or mechanical factors on bone properties, including cortical vBMD.

Bone shaft bending strength index is unaffected by exercise and unloading in mice

Anthropologists frequently use the shaft bending strength index to infer the physical activity levels of humans living in the past from their lower limb bone remains. This index is typically calculated as the ratio of bone shaft second moments of area about orthogonal principal axes (i.e. I(max)/I(min)). Individuals with high I(max)/I(min) values are inferred to have been very active, whereas individuals with low values are inferred to have been more sedentary. However, there is little direct evidence that activity has a causal and predictable effect on the shaft bending strength index. Here, we report the results of two experiments that were designed to test the model within which anthropologists commonly interpret the shaft bending strength index. In the first experiment, mice were treated daily with treadmill exercise for 1 month to simulate a high-activity lifestyle. In the second experiment, in an attempt to simulate a low-activity lifestyle, functional weight-bearing was removed from the hindlimbs of mice for 1 month. Femoral mid-shaft structure was determined with μCT. We found that while exercise resulted in significant enhancement of I(max) and I(min) compared with controls, it failed to significantly increase the I(max)/I(min)index. Similarly, stunted bone growth caused by unloading resulted in significantly diminished I(max) and I(min) compared with controls, but low activity did not lead to significantly decreased I(max)/I(min)compared with normal activity. Together, these results suggest that caution is required when the bone shaft bending strength index is used to reconstruct the activity levels of past humans.