Unusual Salt and pH Induced Changes in Polyethylenimine Solutions

Combined Chemisorption and Complexation Generate siRNA Nanocarriers with Biophysics Optimized for Efficient Gene Knockdown and Air-Blood Barrier Crossing

Current nucleic acid (NA) nanotherapeutic approaches face challenges because of shortcomings such as limited control on loading efficiency, complex formulation procedure involving purification steps, low load of NA cargo per nanoparticle, endosomal trapping, and hampered release inside the cell. When combined, these factors significantly limit the amount of biologically active NA delivered per cell in vitro, delivered dosages in vivo for a prolonged biological effect, and the upscalability potential, thereby warranting early consideration in the design and developmental phase. Here, we report a versatile nanotherapeutic platform, termed auropolyplexes, for improved and efficient delivery of small interfering RNA (siRNA). Semitelechelic, thiolated linear polyethylenimine (PEI) was chemisorbed onto gold nanoparticles to endow them with positive charge. A simple two-step complexation method offers tunable loading of siRNA at concentrations relevant for in vivo studies and the flexibility for inclusion of multiple functionalities without any purification steps. SiRNA was electrostatically complexed with these cationic gold nanoparticles and further condensed with polycation or polyethyleneglycol-polycation conjugates. The resulting auropolyplexes ensured complete complexation of siRNA into nanoparticles with a high load of ∼15,500 siRNA molecules/nanoparticle. After efficient internalization into the tumor cell, an 80% knockdown of the luciferase reporter gene was achieved. Auropolyplexes were applied intratracheally in Balb/c mice for pulmonary delivery, and their biodistribution were studied spatio-temporally and quantitatively by optical tomography. Auropolyplexes were well tolerated with ∼25% of the siRNA dose remaining in the lungs after 24 h. Importantly, siRNA was released from auropolyplexes in vivo and a fraction also crossed the air-blood barrier, which was then excreted via kidneys, whereas >97% of gold nanoparticles were retained in the lung. Linear PEI-based auropolyplexes offer a combination of successful endosomal escape and better biocompatibility profile in vivo. Taken together, combined chemisorption and complexation endow auropolyplexes with crucial biophysical attributes, enabling a versatile and upscalable nanogold-based platform for siRNA delivery in vitro and in vivo.

Immobilization of Naringinase from Aspergillus Niger on a Magnetic Polysaccharide Carrier

Naringinase is an enzymatic complex used in the deglycosylation of compounds with a high application potential in the food and pharmaceutical industries. The aim of the study was to immobilize naringinase from Aspergillus niger KMS on a magnetic carrier obtained on the basis of carob gum activated by polyethyleneimine. Response surface methodology was used to optimize naringinase immobilization taking into account the following factors: pH, immobilization time, initial concentration of naringinase and immobilization temperature. The adsorption of the enzyme on a magnetic carrier was a reversible process. The binding force of naringinase was increased by crosslinking the enzyme with the carrier using dextran aldehyde. The crosslinked enzyme had better stability in an acidic environment and at a higher temperature compared to the free form. The immobilization and stabilization of naringinase by dextran aldehyde on the magnetic polysaccharide carrier lowered the activation energy, thus increasing the catalytic capacity of the investigated enzyme and increasing the activation energy of the thermal deactivation process, which confirms higher stability of the immobilized enzyme in comparison with free naringinase. The preparation of crosslinked naringinase retained over 80% of its initial activity after 10 runs of naringin hydrolysis from fresh and model grapefruit juice.

Redox-active polyamine-salt aggregates as multistimuli-responsive soft nanoparticles

Polyamine-salt aggregates have become promising soft materials in nanotechnology due to their easy preparation process and pH-responsiveness. Here, we report the use of hexacyanoferrate(ii) and hexacyanoferrate(iii) as electroactive crosslinking agents for the formation of nanometer-sized redox-active polyamine-redox-salt aggregates (rPSA) in bulk suspension. This nanoplatform can be selectively assembled or disassembled under different stimuli such as redox environment, pH and ionic strength. By changing the charge of the building blocks, external triggers allow switching the system between two phase states: aggregate-free solution or colloidal rPSA dispersion. The stimuli-activated modulation of the assembly/disassembly processes opens a path to exploit rPSA in technologies based on smart nanomaterials.

Release kinetics study and anti-corrosion behaviour of a pH-responsive ionic liquid-loaded halloysite nanotube-doped epoxy coating

This study focuses on the release kinetics of inhibitor-loaded nanocontainers and the anti-corrosive properties of epoxy coatings doped and undoped with the nanocontainers. In this work, 1-butyl-3-methylimidazolium chloride [Bmim][Cl] was loaded into halloysite nanotubes (HNTs), and the loaded HNTs were encapsulated with polyethyleneimine (PEI)/polyacrylic acid (PAA) and poly(diallyldimethylammonium chloride) (PDADMAC)/polyacrylic acid (PAA) to allow controlled release upon pH stimuli. The polyelectrolyte layer deposition was characterized using zeta potential analysis, and the release profiles were evaluated in neutral, acidic, and alkaline media. The release kinetics was studied and found to conform to the Ritger-Peppas and Korsmeyer-Peppas model, and the results proved that the combination of weak polyelectrolytes (PEI and PAA) provided a good response for up to 50% release of [Bmim][Cl] in acidic and alkaline media after 72 hours. The loaded HNTs encapsulated with the PEI/PAA combination were incorporated into an epoxy coating matrix and applied on an X52 steel substrate. The corrosion resistance of the coated and uncoated substrates was evaluated using electrochemical impedance spectroscopy (EIS) after immersion in a 3.5 wt% NaCl solution up to 72 hours. An artificial defect was created on the coating prior to immersion to evaluate the active corrosion inhibition ability. The coating doped with the smart pH-responsive halloysite nanotubes showed promising results in corrosion protectiveness even after 72 hours of exposure to a salt solution through EIS and SEM.

Chemical unfolding of protein domains induces shape change in programmed protein hydrogels

Programmable behavior combined with tailored stiffness and tunable biomechanical response are key requirements for developing successful materials. However, these properties are still an elusive goal for protein-based biomaterials. Here, we use protein-polymer interactions to manipulate the stiffness of protein-based hydrogels made from bovine serum albumin (BSA) by using polyelectrolytes such as polyethyleneimine (PEI) and poly-L-lysine (PLL) at various concentrations. This approach confers protein-hydrogels with tunable wide-range stiffness, from ~10-64 kPa, without affecting the protein mechanics and nanostructure. We use the 6-fold increase in stiffness induced by PEI to program BSA hydrogels in various shapes. By utilizing the characteristic protein unfolding we can induce reversible shape-memory behavior of these composite materials using chemical denaturing solutions. The approach demonstrated here, based on protein engineering and polymer reinforcing, may enable the development and investigation of smart biomaterials and extend protein hydrogel capabilities beyond their conventional applications.

Kinetic Control in Assembly of Plasmid DNA/Polycation Complex Nanoparticles

Polyelectrolyte complex (PEC) nanoparticles assembled from plasmid DNA (pDNA) and polycations such as linear polyethylenimine (lPEI) represent a major nonviral delivery vehicle for gene therapy tested thus far. Efforts to control the size, shape, and surface properties of pDNA/polycation nanoparticles have been primarily focused on fine-tuning the molecular structures of the polycationic carriers and on assembly conditions such as medium polarity, pH, and temperature. However, reproducible production of these nanoparticles hinges on the ability to control the assembly kinetics, given the nonequilibrium nature of the assembly process and nanoparticle composition. Here we adopt a kinetically controlled mixing process, termed flash nanocomplexation (FNC), that accelerates the mixing of pDNA solution with polycation lPEI solution to match the PEC assembly kinetics through turbulent mixing in a microchamber. This achieves explicit control of the kinetic conditions for pDNA/lPEI nanoparticle assembly, as demonstrated by the tunability of nanoparticle size, composition, and pDNA payload. Through a combined experimental and simulation approach, we prepared pDNA/lPEI nanoparticles having an average of 1.3 to 21.8 copies of pDNA per nanoparticle and average size of 35 to 130 nm in a more uniform and scalable manner than bulk mixing methods. Using these nanoparticles with defined compositions and sizes, we showed the correlation of pDNA payload and nanoparticle formulation composition with the transfection efficiencies and toxicity in vivo. These nanoparticles exhibited long-term stability at -20 °C for at least 9 months in a lyophilized formulation, validating scalable manufacture of an off-the-shelf nanoparticle product with well-defined characteristics as a gene medicine.

Kinetic Control in Assembly of Plasmid DNA/Polycation Complex Nanoparticles

Polyelectrolyte complex (PEC) nanoparticles assembled from plasmid DNA (pDNA) and polycations such as linear polyethylenimine (lPEI) represent a major nonviral delivery vehicle for gene therapy tested thus far. Efforts to control the size, shape, and surface properties of pDNA/polycation nanoparticles have been primarily focused on fine-tuning the molecular structures of the polycationic carriers and on assembly conditions such as medium polarity, pH, and temperature. However, reproducible production of these nanoparticles hinges on the ability to control the assembly kinetics, given the nonequilibrium nature of the assembly process and nanoparticle composition. Here we adopt a kinetically controlled mixing process, termed flash nanocomplexation (FNC), that accelerates the mixing of pDNA solution with polycation lPEI solution to match the PEC assembly kinetics through turbulent mixing in a microchamber. This achieves explicit control of the kinetic conditions for pDNA/lPEI nanoparticle assembly, as demonstrated by the tunability of nanoparticle size, composition, and pDNA payload. Through a combined experimental and simulation approach, we prepared pDNA/lPEI nanoparticles having an average of 1.3 to 21.8 copies of pDNA per nanoparticle and average size of 35 to 130 nm in a more uniform and scalable manner than bulk mixing methods. Using these nanoparticles with defined compositions and sizes, we showed the correlation of pDNA payload and nanoparticle formulation composition with the transfection efficiencies and toxicity in vivo. These nanoparticles exhibited long-term stability at -20 °C for at least 9 months in a lyophilized formulation, validating scalable manufacture of an off-the-shelf nanoparticle product with well-defined characteristics as a gene medicine.

Recent advances in polymeric materials for the delivery of RNA therapeutics

Introduction: The delivery of nucleic acid therapeutics through non-viral carriers face multiple biological barriers that reduce their therapeutic efficiency. Despite great progress, there remains a significant technological gap that continues to limit clinical translation of these nanocarriers. A number of polymeric materials are being exploited to efficiently deliver nucleic acids and achieve therapeutic effects. Areas covered: We discuss the recent advances in the polymeric materials for the delivery of nucleic acid therapeutics. We examine the use of common polymer architectures and highlight the challenges that exist for their development from bench side to clinic. We also provide an overview of the most notable improvements made to circumvent such challenges, including structural modification and stimuli-responsive approaches, for safe and effective nucleic acid delivery. Expert opinion: It has become apparent that a universal carrier that follows 'one-size' fits all model cannot be expected for delivery of all nucleic acid therapeutics. Carriers need to be designed to exhibit sensitivity and specificity toward individual targets diseases/indications, and relevant subcellular compartments, each of which possess their own unique challenges. The ability to devise synthetic methods that control the molecular architecture enables the future development that allow for the construction of 'intelligent' designs.

Upconversion nanoparticles for sensing pH

Upconversion nanoparticles (UCNPs) can provide a vehicle for chemical imaging by coupling chemically sensitive dyes and quenchers. The mechanism for coupling of two anthraquinone dyes, Calcium Red and Alizarin Red S, was investigated as a function of pH. The green emission band of the UCNPs was quenched by a pH-dependent inner filter effect (IFE) while the red emission band remained unchanged and acted as the reference signal for ratiometric pH measurements. Contrary to previous expectation, there was little evidence for a resonance energy transfer (RET) mechanism even when the anthraquinones were attached onto the UCNPs through electrostatic attraction. Since the UCNPs are point emitters, only emitters close to the surface of the UCNP are within the expected Förster distance and UC-RET is <10%. The theoretical and experimental analysis of the interaction between UCNPs and pH-sensitive quenchers will allow the design of UCNP pH sensors for determination of pH via IFE.

Development of a High-Flux Thin-Film Composite Nanofiltration Membrane with Sub-Nanometer Selectivity Using a pH and Temperature-Responsive Pentablock Co-Polymer

Producing block co-polymer-based nanofiltration (NF) membranes with sharp molecular weight cutoffs via an efficient method exhibiting persistent size-based separation quality is challenging. In this study, this challenge was addressed by reporting a facile approach to fabricate pentablock co-polymer (PBC)-based thin-film composite (TFC) NF membranes. The PBC, consisting of temperature-responsive Pluronic F127 (PEO-b-PPO-b-PEO) middle blocks and pH-responsive poly(N,N-(diethylamino)ethyl methacrylate) end blocks, were synthesized by atom-transfer radical polymerization. This polymer was then attached electrostatically to the surface of polysulfone/sulfonated polyether-sulfone support membranes fabricated using a non-solvent-induced phase separation technique. The conformational changes of the PBC chains in response to pH and temperature determined the pure water flux and neutral solute (PEG 1000) rejection performance of TFC membranes. Permeability of the membranes increased from 13.0 ± 0.63 to 15.9 ± 0.06 L/m²·h·bar and from 6.7 ± 0.00 to 13.9 ± 0.07 L/m²·h·bar by changing the solution pH from 4 to 8.5 and temperature from 4 to 25 °C, respectively. The pH- and temperature-responsive conformational changes did not affect the PEG 1000 rejection and membrane pore radius, which remained constant at ∼89% and ∼0.9 nm, respectively. This important finding was attributed to the high grafting density of co-polymer chains, resulting in spatial limitations among the grafted chains. The pore size of ∼0.9 nm achieved with the proposed membrane design is the smallest size reported so far for membranes fabricated from block co-polymers. TFC membranes demonstrated high stability and maintained their flux and rejection values under both static (storage in an acidic solution for up to 1 month) and dynamic (filtering PEG 1000 solution over 1 week) conditions. Pentablock co-polymers enable a NF membrane with a sharp molecular weight cutoff suitable for size-selective separations. The membrane fabrication technique proposed in this study is a scalable and promising alternative that does not involve complex synthetic routes.

Rapid, Single-Step Protein Encapsulation via Flash NanoPrecipitation

Flash NanoPrecipitation (FNP) is a rapid method for encapsulating hydrophobic materials in polymer nanoparticles with high loading capacity. Encapsulating biologics such as proteins remains a challenge due to their low hydrophobicity (logP < 6) and current methods require multiple processing steps. In this work, we report rapid, single-step protein encapsulation via FNP using bovine serum albumin (BSA) as a model protein. Nanoparticle formation involves complexation and precipitation of protein with tannic acid and stabilization with a cationic polyelectrolyte. Nanoparticle self-assembly is driven by hydrogen bonding and electrostatic interactions. Using this approach, high encapsulation efficiency (up to ~80%) of protein can be achieved. The resulting nanoparticles are stable at physiological pH and ionic strength. Overall, FNP is a rapid, efficient platform for encapsulating proteins for various applications.

Power Generation by Selective Self-Assembly of Biocatalysts

Through a careful chemical and bioelectronic design we have created a system that uses self-assembly of enzyme-nanoparticle hybrids to yield bioelectrocatalytic functionality and to enable the harnessing of electrical power from biomass. Here we show that mixed populations of hybrids acting as catalyst carriers for clean energy production can be efficiently stored, self-assembled on functionalized stationary surfaces, and magnetically re-collected to make the binding sites on the surfaces available again. The methodology is based on selective interactions occurring between chemically modified surfaces and ligand-functionalized hybrids. The design of a system with minimal cross-talk between the particles, outstanding selective binding of the hybrids at the electrode surfaces, and direct anodic and cathodic electron transfer pathways leads to mediator-less bioelectrocatalytic transformations which are implemented in the construction of a fast self-assembling, membrane-less fructose/O₂ biofuel cell.

Complex-type N-glycans on VSV-G pseudotyped HIV exhibit 'tough' sialic and 'brittle' mannose self-adhesions

The complex-type glycan shields of eukaryotic cells have a core layer of mannose residues buried under tiers of sugars that end with sialic acid (SA) residues. We investigate if the self-latching of mannose residues, earlier reported in pure monolayer studies, also manifests in the setting of a complex-type glycan shield. Would distal SA residues impede access to the mannose core? The interactions of mannobiose-, SA-, and lactose-coated probes with the complex-type VSV-G glycan shield on an HIV pseudovirus were studied with force-spectroscopy and gold-nanoparticle solutions. In force spectroscopy, the sugar probes can be forced to sample the depths of the glycan shield, whereas with sugar-coated nanoparticles, only interactions permitted by freely-diffusive contact occur. Deep-indentation mechanics was performed to verify the inferred structure of the engineered virus and to isolate the glycan shield layer for subsequent interaction studies. The adhesion between the sugar-probes and complex-type glycan shield was deconvoluted by comparing against the cross- and self- adhesions between the sugars in pure monolayers. Results from complementing systems were consistent with mannobiose-coated probes latching to the mannose core in the glycan shield, unhindered by the SA and distal sugars, with a short-range 'brittle' release of adhesion resulting in tightly coated viruses. SA-Coated probes, however, adhere to the terminal SA layer of a glycan shield with long-range and mechanically 'tough' adhesions resulting in large-scale virus aggregation. Lactose-coated probes exhibit ill-defined adherence to sialic residues. The selection and positioning of sugars within a glycan shield can influence how carbohydrate surfaces of different composition adhere.

Zeta Potential Changing Polyphosphate Nanoparticles: A Promising Approach To Overcome the Mucus and Epithelial Barrier

The aim of the present study was to develop zeta potential-changing polyphosphate nanoparticles (pp-NPs) in order to overcome the diffusion barrier of the mucus gel layer and to provide an enhanced cellular uptake. pp-NPs were obtained by in situ gelation between cationic polyethylene imine and anionic polyphosphate. The resulting pp-NPs were characterized with regard to size and zeta potential. Phosphate release studies were carried out by incubation of pp-NPs with isolated as well as cell-associated intestinal alkaline phosphatase (IAP) and quantified by malachite green assay. Correspondingly, change in the zeta potential was measured, and pp-NPs were analyzed by scanning electron microscopy studies. Mucus permeation studies were performed with porcine intestinal mucus via the transwell insert method and rotating tube method. Furthermore, cell viability and cellular uptake were investigated on Caco-2 cells. The resulting pp-NPs displayed a mean size of 269.16 ± 1.12 nm and a zeta potential between -9 and -10 mV in the characterization studies. Within 4 h, a remarkable amount of phosphate was released from pp-NPs incubated with isolated IAP as well as cell-associated IAP and zeta potential raised up from -9.14 ± 0.45 to -1.75 ± 0.46 mV. Compared with dephosphorylated polyphosphate nanoparticles (de-pp-NPs), a significantly enhanced mucus permeation of pp-NPs was observed. Moreover, pp-NPs did not exhibit cytotoxicity. Cellular uptake increased 2.6-fold by conversion of pp-NPs to de-pp-NPs following enzymatic cleavage. Taking the comparatively simple preparation method and the high mucus-permeating properties of pp-NPs and high cellular uptake properties of de-pp-NPs into account, these nanocarriers might be promising novel tools for mucosal drug delivery.

Polycation-globular protein complex: Ionic strength and chain length effects on the structure and properties

The effect of high salt concentration and pH on the binding of globular protein to polycation at different molar masses has been investigated by dynamic light scattering (DLS), turbidimetry and electrostatic modeling for the protein. In dilute concentration regime, DLS and pH titrations showed three remarkable pH transitions: pHc, the pH where soluble complexes of bovine serum albumin (BSA) and linear synthetic Polyethylenemine (PEI) are formed, pHc’ presents the end of primary soluble complex and pHφ presents the first appearance of microcoacervate droplets. All pH transitions increase with increasing NaCl concentration. The Adaptive Poisson-Boltzmann Solver (APBS) identify with precision the functional sites at the surface of BSA and shows that the strength of electrostatic interactions depends hugely on the variation of pH and ionic strength. At a very high concentration of salt, no remarkable effect on a mixture formed of a long chain of polycation and globular protein.

pH/Redox Dual-Responsive Polyplex with Effective Endosomal Escape for Codelivery of siRNA and Doxorubicin against Drug-Resistant Cancer Cells

The enhanced endo-lysosomal sequestration still remains a big challenge in overcoming multidrug resistance (MDR). Herein, a dual-responsive polyplex with effective endo-lysosomal escape based on methoxypoly(ethylene glycol)-polylactide-polyhistidine-ss-oligoethylenimine (mPEG- b-PLA-PHis-ssOEI) was developed for codelivering MDR1 siRNA and doxorubicin (DOX). The polyplex showed good encapsulation of DOX and siRNA as well as triggered payload release in response to pH/redox stimuli because of the PHis protonation and the disulfide bond cleavage. The polyplex at an N/P ratio of 7 demonstrated a much higher payload delivery efficiency, MDR1 gene silence efficiency, cytotoxicity against MCF-7/ADR cell, and stronger MCF-7/ADR tumor growth inhibition than the polyplexes at higher N/P ratios. This was attributed to the stronger electrostatic attraction between siRNA and OEIs at higher N/P ratios that suppressed the release of MDR1 siRNA and OEIs, which played a dominant role in overcoming payload endo-lysosomal sequestration by the OEI-induced membrane permeabilization effect. Consequently, the polyplex with effective endo-lysosomal escape provides a rational approach for codelivery of siRNAs and chemotherapy agents for MDR reversal.

Genome Editing with mRNA Encoding ZFN, TALEN, and Cas9

Genome-editing technologies based on programmable nucleases have significantly broadened our ability to make precise and direct changes in the genomic DNA of various species, including human cells. Delivery of programmable nucleases into the target tissue or cell is one of the pressing challenges in transforming the technology into medicine. In vitro-transcribed (IVT) mRNA-mediated delivery of nucleases has several advantages, such as transient expression with efficient in vivo and in vitro delivery, no genomic integration, a potentially low off-target rate, and high editing efficiency. This review focuses on key barriers related to IVT mRNA delivery, on developed modes of delivery, and on the application and future prospects of mRNA encoding nuclease-mediated genome editing in research and clinical trials.

Hygroscopy-induced nanoparticle reshuffling in ionic-gold-residue-stabilized gold suprananoparticles

Polyethyleneimine (PEI)-stabilized gold nanoparticles were used as a model to understand the roles of ionic precursors in the formation of nanoparticles and the impact of their presence on the nanoparticle properties. The low availability of elemental gold and the stabilization of the just-generated gold nanoparticles by the excess gold ions contributed to the production of ultra-small nearly neutral gold nanoparticles, resulting in properties significantly different from those prepared by conventional methods. The cross-linking between gold ions/PEI/nanoparticles further led to the assembly of these small gold nanoparticles into suprananoparticles that were stable in water. The hygroscopic Au(iii) residues in the suprananoparticles absorbed moisture to form a micro-water pool and the nanoparticles in the new aqueous solution reshuffled to generate larger nanoparticles, leading to significant changes in their optical properties. Such a phenomenon was formulated into a fast, sensitive and straightforward method for the detection of water content in organic solvents.

Indocyanine green-modified hollow mesoporous Prussian blue nanoparticles loading doxorubicin for fluorescence-guided tri-modal combination therapy of cancer

Hollow mesoporous structures with interior cavities and expanded surface area have attracted considerable interest as drug delivery systems. In this study, a multifunctional nanotheranostic agent was developed by conjugating indocyanine green (ICG) and loading doxorubicin (DOX) onto the surfaces or within the cavities of hollow mesoporous Prussian blue (HMPB) nanoparticles, known as HMPB@PEI/ICG/DOX or simply HPID NPs, which were investigated as phototheranostic agents for in vivo fluorescence imaging and light-induced chemotherapy, photothermal therapy (PTT) and photodynamic therapy (PDT). These original HPID NPs exhibited strong near infrared (NIR) absorbance, reactive oxygen species (ROS) yield, and controlled chemotherapeutic drug release behavior. After intravenous injection of HPID NPs, highly efficient solid tumor ablation effects were observed in 4T1 tumor-bearing mouse models under NIR laser irradiation. Additionally, there was insignificant low-term toxicity or damage to normal tissues, as evidenced by histopathological and hemocompatibility analyses, suggesting that this agent has reliable biosafety for systemic applications. Taken together, the results of this study suggest that HPID NPs can produce tumor-specific and stimuli-triggered theranostic effects under tri-modal combination therapy. These HPID NPs advantageously provide traceable accumulation and activation and therefore could be a capable mediator in nanomedicines for eliminating solid tumors.

Magnetic-silk/polyethyleneimine core-shell nanoparticles for targeted gene delivery into human breast cancer cells

The lack of efficient and cost-effective methods for gene delivery has significantly hindered the applications of gene therapy. In this paper, a simple one step and cost effective salting-out method has been explored to fabricate silk-PEI nanoparticles (SPPs) and magnetic-silk/PEI core-shell nanoparticles (MSPPs) for targeted delivery of c-myc antisense oligodeoxynucleotides (ODNs) into MDA-MB-231 breast cancer cells. The size and zeta potential of the particles were controlled by adjusting the amount of silk fibroin in particle synthesis. Lower surface charges and reduced cytotoxicity were achieved for MSPPs compared with PEI coated magnetic nanoparticles (MPPs). Both SPPs and MSPPs were capable of delivering the ODNs into MDA-MB-231 cells and significantly inhibited the cell growth. Through magnetofection, high ODN uptake efficiencies (over 70%) were achieved within 20 min using MSPPs as carriers, exhibiting a significantly enhanced uptake effect compared to the same carriers via non-magnetofection. Both SPPs and MSPPs exhibited a significantly higher inhibition effect against MDA-MB-231 breast cancer cells compared to human dermal fibroblast (HDF) cells. Targeted ODN delivery was achieved using MSPPs with the help of a magnet, making them promising candidates for targeted gene therapy applications.

Hyperbranched poly(ethylenimine-co-oxazoline) by thiol–yne chemistry for non-viral gene delivery: investigating the role of polymer architecture

Synthesis of long-chain hyperbranched poly(ethylenimine-co-oxazoline)s by AB₂ thiol–yne chemistry is reported, and their application as pDNA transfection agents studied.

Development of high flux nanofiltration membranes through single bilayer polyethyleneimine/alginate deposition

The aim of this study is to prepare high flux, stable, antifouling nanofiltration membranes through single bilayer polyelectrolyte deposition. To this end, a tight ultrafiltration support membrane was prepared from a polysulfone/sulfonated polyethersulfone blend. Deposition of a polyethyleneimine and alginate pair on this support has reduced the molecular weight cut off from 6 kDa to below 1 kDa. The pure water permeability and polyethylene glycol 1000 rejection of the coated membrane were found to be 15.5 ± 0.3 L/m²·h·bar and 90 ± 0.6%, respectively, by setting the deposition pH for each layer to 8 and the ionic strengths to 0.5 M and 0 M. This membrane has exhibited significantly higher permeability than commercial membranes with the same molecular weight cut off, retaining 98% of the initial flux during 15 h filtration of bovine serum albumine. In addition, the membrane has been able to completely remove anionic dyes from aqueous solution by showing 99.9% retentions to Reactive red 141, Brilliant blue G and Congo red with a 2 bar transmembrane pressure. High flux and membrane stability in acidic and salty environments have been achieved when deposition conditions favor high adsorption levels for the first layer and strong ionic cross-linking between the carboxyl group on the alginate and the amine groups on the polyethyleneimine.

Surface-Modified Shortwave-Infrared-Emitting Nanophotonic Reporters for Gene-Therapy Applications

Gene therapy is emerging as the next generation of therapeutic modality with United States Food and Drug Administration approved gene-engineered therapy for cancer and a rare eye-related disorder, but the challenge of real-time monitoring of on-target therapy response remains. In this study, we have designed a theranostic nanoparticle composed of shortwave-infrared-emitting rare-earth-doped nanoparticles (RENPs) capable of delivering genetic cargo and of real-time response monitoring. We showed that the cationic coating of RENPs with branched polyethylenimine (PEI) does not have a significant impact on cellular toxicity, which can be further reduced by selectively modifying the surface characteristics of the PEI coating using counter-ions and expanding their potential applications in photothermal therapy. We showed the tolerability and clearance of a bolus dose of RENPs@PEI in mice up to 7 days after particle injection in addition to the RENPs@PEI ability to distinctively discern lung tumor lesions in a breast cancer mouse model with an excellent signal-to-noise ratio. We also showed the availability of amine functional groups in the collapsed PEI chain conformation on RENPs, which facilitates the loading of genetic cargo that hybridizes with target gene in an in vitro cancer model. The real-time monitoring and delivery of gene therapy at on-target sites will enable the success of an increased number of gene- and cell-therapy products in clinical trials.

Polyethylenimine-based nanocarriers in co-delivery of drug and gene: a developing horizon

The meaning of gene therapy is the delivery of DNA or RNA to cells for the treatment or prevention of genetic disorders. The success rate of gene therapy depends on the progression and safe gene delivery system. The vectors available for gene therapy are divided into viral and non-viral systems. Viral vectors cause higher transmission efficiency and long gene expression, but they have major problems, such as immunogenicity, carcinogenicity, the inability to transfer large size genes and high costs. Non-viral gene transfer vectors have attracted more attention because they exhibit less toxicity and the ability to transfer large size genes. However, the clinical application of non-viral methods still faces some limitations, including low transmission efficiency and poor gene expression. In recent years, numerous methods and gene-carriers have been developed to improve gene transfer efficiency. The use of Polyethylenimine (PEI) based transfer of collaboration may create a new way of treating diseases and the combination of chemotherapy and gene therapy. The purpose of this paper is to introduce the PEI as an appropriate vector for the effective gene delivery.

Finding the ideal polyethylenimine-plasmid DNA system for co-delivery of payloads in cancer therapy

Researchers still hold for the development of a safety and advanced delivery system able of efficient therapeutic action. The co-delivery of different payloads is part of this strategy and has already demonstrated to be a valuable tool against the most severe diseases. In the pursuit of an "ideal" drug/gene co-delivery vector for cancer therapy, we present a complete comparison study of different morphology and molecular weight polyethylenimine (PEI)/p53 encoding plasmid DNA (pDNA) polyplexes. Besides pDNA, also methotrexate (MTX) has been loaded into PEI/pDNA nanoparticles. The polyplexes have been characterized in terms of morphology, size, surface charges, loading/encapsulation efficiencies and toxicity. Although the nature of PEI can influence these properties, they deeply vary with the polymer nitrogen to pDNA phosphate (N/P) ratio. The transfection of HeLa cells mediated by PEI/pDNA/MTX vectors leads to both the release of MTX and the p53 protein expression. Modelling of MTX release kinetics brings valuable information concerning drug delivery mechanism. Moreover, the success of transfection is dependent on the nature of PEI and, mainly, on the N/P ratio used in the formulation of polyplexes. This work represents a great contribution for the design and development of innovative PEI based carriers for the most challenging biomedical applications.

From 2D to 3D patches on multifunctional particles: how microcontact printing creates a new dimension of functionality

A straightforward approach for the precise multifunctional surface modification of particles with three-dimensional patches using microcontact printing is presented. By comparison to previous works it was possible to not only control the diameter, but also to finely tune the thickness of the deposited layer, opening up the way for three-dimensional structures and orthogonal multifunctionality. The use of PEI as polymeric ink, PDMS stamps for microcontact printing on silica particles and the influence of different solvents during particle release on the creation of functional particles with three-dimensional patches are described. Finally, by introducing fluorescent properties by incorporation of quantum dots into patches and by particle self-assembly via avidin-biotin coupling, the versatility of this novel modification method is demonstrated.

A Highly Sensitive and Selective Colorimetric Hg2+ Ion Probe Using Gold Nanoparticles Functionalized with Polyethyleneimine

A highly sensitive and selective colorimetric assay for the detection of Hg²⁺ ions was developed using gold nanoparticles (AuNPs) conjugated with polyethyleneimine (PEI). The Hg²⁺ ion coordinates with PEI, decreasing the interparticle distance and inducing aggregation. Time-of-flight secondary ion mass spectrometry showed that the Hg²⁺ ion was bound to the nitrogen atoms of the PEI in a bidentate manner (N-Hg²⁺-N), which resulted in a significant color change from light red to violet due to aggregation. Using this PEI-AuNP probe, determination of Hg²⁺ ion can be achieved by the naked eye and spectrophotometric methods. Pronounced color change of the PEI-AuNPs in the presence of Hg²⁺ was optimized at pH 7.0, 50°C, and 300 mM·NaCl concentration. The absorption intensity ratio (A₇₀₀/A₅₁₄) was correlated with the Hg²⁺ concentration in the linear range of 0.003-5.0 μM. The limits of detection were measured to be 1.72, 1.80, 2.00, and 1.95 nM for tap water, pond water, tuna fish, and bovine serum, respectively. Owing to its facile and sensitive nature, this assay method for Hg²⁺ ions can be applied to the analysis of water and biological samples.

The great escape: how cationic polyplexes overcome the endosomal barrier

Endo-lysosomal escape strategies of cationic polymer-mediated gene delivery at a glance.

Mannose Surfaces Exhibit Self-Latching, Water Structuring, and Resilience to Chaotropes: Implications for Pathogen Virulence

Several viral and fungal pathogens, including HIV, SARS, Dengue, Ebola, and Cryptococcus neoformans, display a preponderance of mannose residues on their surface, particularly during the infection cycle or in harsh environments. The innate immune system, on the other hand, abounds in mannose receptors which recognize mannose residues on pathogens and trigger their phagocytosis. We pose the question if there is an advantage for pathogens to display mannose on their surface, despite these residues being recognized by the immune system. The surface properties and interactions of opposing monolayers of mannobiose (disaccharide of mannose) were probed using atomic force spectroscopy. Unlike its diastereoisomer lactose, mannobiose molecules exhibited lateral packing interactions that manifest on the surface scale as a self-recognizing latch. A break-in force is required for opposing surfaces to penetrate and a breakout (or self-adhesion force) of similar magnitude is required for penetrated surfaces to separate. A hierarchy of self-adhesion forces was distinguished as occurring at the single residue (∼25 pN), cluster (∼250 pN), monolayer (∼1.1 nN), and supramonolayer level. The break-in force and break-out force appear resilient to the presence of simple chaotropes that attenuate a layer of structured water around the mannose surface. The layer of structured water otherwise extends to distances several times longer than a mannobiose residue, indicating a long-range propagation of the hydrogen bonding imposed by the residues. The span of the structured water increases with the velocity of an approaching surface, similar to shear thickening, but fissures at higher approach velocities. Our studies suggest that mannose residues could guide interpathogen interactions, such as in biofilms, and serve as a moated fortress for pathogens to hide behind to resist detection and harsh environments.