An overview and historical look back at the solvent extraction using nitrogen donor ligands to extract and separate An(III) from Ln(III)

Inner versus outer sphere metal-monoamide complexation: ramifications for tetravalent & hexavalent actinide selectivity

Extraction of tetravalent and hexavalent plutonium by straight and branched chained monoamides was studied using UV-vis spectroscopy. These results suggest straight monoamides recover outer-sphere species, while branched chain monoamides recover inner-sphere species.

Theoretical studies on the synergistic extraction of Am3+ and Eu3+ with CMPO–HDEHP and CMPO–HEH[EHP] systems

Synergistic extraction and separation of Eu³⁺/Am³⁺ with CMPO–HDEHP and CMPO–HEH[EHP] systems have been theoretically investigated.

Radiolysis of alkyl substituted tridentate 2,6-bis(1,2,4-triazine-3-yl)pyridines: an experimental study with DFT validation

The radiolysis products of alkyl substituted tridentate 2,6-bis(1,2,4-triazine-3-yl)pyridines (BTPs) were studied by an experimental study with DFT validation.

Studies on neptunium complexation with CMPO- and diglycolamide-functionalized ionic liquids: experimental and computational studies

A CMPO-functionalized task-specific ionic liquid provided significantly greater extraction of Np⁴⁺ than of NpO₂²⁺, which is of interest for radioactive waste treatment.

4,4′-Di-tert-butyl-6-(1H-tetrazol-5-yl)-2,2′-bipyridine: modification of a highly selective N-donor ligand for the separation of trivalent actinides from lanthanides

In the present work, the complexation and extraction behaviour of HN₄^tbubipy towards An(iii) and Ln(iii) is studied by spectroscopy, solvent extraction, and QM calculations.

A new Pu(iii) coordination geometry in (C5H5NBr)2[PuCl3(H2O)5]·2Cl·2H2O as obtained via supramolecular assembly in aqueous, high chloride media

A novel hydrated Pu(iii) chloride, (C₅H₅NBr)₂[PuCl₃(H₂O)₅]·Cl·2H₂O, is prepared from aqueous media and the non-covalent interaction pairings are rationalized using electrostatic potentials.

Separation of actinides from spent nuclear fuel: A review

This review summarises the methods currently available to extract radioactive actinide elements from solutions of spent nuclear fuel. This separation of actinides reduces the hazards associated with spent nuclear fuel, such as its radiotoxicity, volume and the amount of time required for its' radioactivity to return to naturally occurring levels. Separation of actinides from environmental water systems is also briefly discussed. The actinide elements typically found in spent nuclear fuel include uranium, plutonium and the minor actinides (americium, neptunium and curium). Separation methods for uranium and plutonium are reasonably well established. On the other hand separation of the minor actinides from lanthanide fission products also present in spent nuclear fuel is an ongoing challenge and an area of active research. Several separation methods for selective removal of these actinides from spent nuclear fuel will be described. These separation methods include solvent extraction, which is the most commonly used method for radiochemical separations, as well as the less developed but promising use of adsorption and ion-exchange materials.

2,6-Bis(5,6-diisopropyl-1,2,4-triazin-3-yl)pyridine: a highly selective N-donor ligand studied by TRLFS, liquid–liquid extraction and molecular dynamics

Studying the effect of modifications of BTP-ligands on the complexation and separation of Ln(iii) and An(iii).

The AHA Moment: Assessment of the Redox Stability of Ionic Liquids Based on Aromatic Heterocyclic Anions (AHAs) for Nuclear Separations and Electric Energy Storage

Because of their extended conjugated bond network, aromatic compounds generally have higher redox stability than less saturated compounds. We conjectured that ionic liquids (ILs) consisting of aromatic heterocyclic anions (AHAs) may exhibit improved radiation and electrochemical stability. Such properties are important in applications of these ILs as diluents in radionuclide separations and electrolytes in the electric energy storage devices. In this study, we systematically examine the redox chemistry of the AHAs. Three classes of these anions have been studied: (i) simple 5-atom ring AHAs, such as the pyrazolide and triazolides, (ii) AHAs containing an adjacent benzene ring, and (iii) AHAs containing electron-withdrawing groups that were introduced to reduce their basicity and interaction with metal ions. It is shown that fragmentation in the reduced and oxidized states of these AHAs does not generally occur, and the two main products, respectively, are the H atom adduct and the imidyl radical. The latter species occurs either as an N σ-radical or as an N π-radical, depending on the length of the N-N bond, and the state that is stabilized in the solid matrix is frequently different from that having the lowest energy in the gas phase. In some instances, the formation of the sandwich π-stack dimer radical anions has been observed. For trifluoromethylated anions, H adduct formation did not occur; instead, there was facile loss of fluoride from their fluorinated groups. The latter can be problematic in nuclear separations, but beneficial in batteries. Overall, our study suggests that AHA-based ILs are viable candidates for use as radiation-exposed diluents and electrolytes.

Hydrophilic sulfonated bis-1,2,4-triazine ligands are highly effective reagents for separating actinides(iii) from lanthanides(iii) via selective formation of aqueous actinide complexes

Tetrasulfonated bis-1,2,4-triazine ligands can selectively complex and separate actinides from lanthanides in aqueous nitric acid with very high selectivities.

We report the first examples of hydrophilic 6,6′-bis(1,2,4-triazin-3-yl)-2,2′-bipyridine (BTBP) and 2,9-bis(1,2,4-triazin-3-yl)-1,10-phenanthroline (BTPhen) ligands, and their applications as actinide(iii) selective aqueous complexing agents. The combination of a hydrophobic diamide ligand in the organic phase and a hydrophilic tetrasulfonated bis-triazine ligand in the aqueous phase is able to separate Am(iii) from Eu(iii) by selective Am(iii) complex formation across a range of nitric acid concentrations with very high selectivities, and without the use of buffers. In contrast, disulfonated bis-triazine ligands are unable to separate Am(iii) from Eu(iii) in this system. The greater ability of the tetrasulfonated ligands to retain Am(iii) selectively in the aqueous phase than the corresponding disulfonated ligands appears to be due to the higher aqueous solubilities of the complexes of the tetrasulfonated ligands with Am(iii). The selectivities for Am(iii) complexation observed with hydrophilic tetrasulfonated bis-triazine ligands are in many cases far higher than those found with the polyaminocarboxylate ligands previously used as actinide-selective complexing agents, and are comparable to those found with the parent hydrophobic bis-triazine ligands. Thus we demonstrate a feasible alternative method to separate actinides from lanthanides than the widely studied approach of selective actinide extraction with hydrophobic bis-1,2,4-triazine ligands such as CyMe₄-BTBP and CyMe₄-BTPhen.

NMR and TRLFS studies of Ln(iii) and An(iii) C5-BPP complexes

C5-BPP is a highly efficient N-donor ligand for the separation of trivalent actinides, An(iii), from trivalent lanthanides, Ln(iii). The molecular origin of the selectivity of C5-BPP and many other N-donor ligands of the BTP-type is still not entirely understood. We present here the first NMR studies on C5-BPP Ln(iii) and An(iii) complexes. C5-BPP is synthesized with 10% 15N labeling and characterized by NMR and LIFDI-MS methods. 15N NMR spectroscopy gives a detailed insight into the bonding of C5-BPP with lanthanides and Am(iii) as a representative for trivalent actinide cations, revealing significant differences in 15N chemical shift for coordinating nitrogen atoms compared to Ln(iii) complexes. The temperature dependence of NMR chemical shifts observed for the Am(iii) complex indicates a weak paramagnetism. This as well as the observed large chemical shift for coordinating nitrogen atoms show that metal-ligand bonding in Am(C5-BPP)3 has a larger share of covalence than in lanthanide complexes, confirming earlier studies. The Am(C5-BPP)3 NMR sample is furthermore spiked with Cm(iii) and characterized by time-resolved laser fluorescence spectroscopy (TRLFS), yielding important information on the speciation of trace amounts of minor complex species.

A remarkable enhancement in Am3+/Eu3+selectivity by an ionic liquid based solvent containing bis-1,2,4-triazinyl pyridine derivatives: DFT validation of experimental results

Different complexation behaviour in RTIL medium resulted in an enhancement in selectivity up to a few thousands with MeBTP.

The structures of CyMe4-BTBP complexes of americium(iii) and europium(iii) in solvents used in solvent extraction, explaining their separation properties

The structure around the absorbing atom in the dicomplexes of CyMe₄-BTBP of americium(iii) and europium(III) have been studied in solvent used in solvent extraction.

Probing the difference in covalence by enthalpy measurements: a new heterocyclic N-donor ligand for actinide/lanthanide separation

BQPhen, a new tetra-dentate nitrogen-donor ligand, forms stronger complexes with Am³⁺ than Eu³⁺ or Nd³⁺, due to a more exothermic enthalpy of complexation for the Am³⁺ complexes, implying a higher degree of covalence in the BQPhen complexes with Am³⁺ than Eu³⁺ or Nd³⁺.

Extraction mechanism and γ-radiation effect on the removal of Eu3+ by a novel BTPhen/[Cnmim][NTf2] system in the presence of nitric acid

The extraction mechanism of Eu³⁺ by using BTPhen/[C_nmim][NTf₂] (n = 2, 4, 8) was investigated in the presence of nitric acid, and the new extraction system shows high radiation stability.