Long-term complications after total knee arthroplasty with or without resurfacing of the patella

Selective patellar resurfacing in total knee arthroplasty: a prospective, randomized, double-blind study

350 knees were evaluated in a prospective, randomized, double-blinded study of selective patellar resurfacing in primary total knee arthroplasty. Knees with exposed bone on the patellar articular surface were excluded. 327 knees were evaluated at a mean follow-up of 7.8years. 114 knees followed for greater than 10 years were analyzed separately. Satisfaction was higher in patients with a resurfaced patella. In patients followed for at least 10 years, no significant difference was found. No difference was found in KSS scores or survivorship. No complications of patellar resurfacing were identified. The vast majority of patients with remaining patellar articular cartilage do very well with total knee arthroplasty regardless of patellar resurfacing. Patient satisfaction may be slightly higher with patellar resurfacing.

Reconstruction of a deficient patella in revision total knee arthroplasty: results of a new surgical technique using transcortical wiring

This study aimed to report the results of a novel surgical technique for the reconstruction of a deficient patella during revision total knee arthroplasty (TKA). Twenty-eight patients (30 knees) with a deficient patella were treated with an onlay-type prosthesis and bone-augmenting procedure, using acrylic bone cement and transcortical wiring. The technique was indicated when the thickness of remnant patella was less than 8mm with variable amounts of the peripheral rim. Mean follow-up period was 36.6months (range, 24 to 55months).The respective mean Knee Society scores for knee and function improved from 34.2 and 23 points, preoperatively to 73.5 and 61 points, at final follow-up. One patient experienced patellar fracture 1week after surgery. There were no complications associated with implanted hardware.

Correlation between knee kinematics and patellofemoral contact pressure in total knee arthroplasty

The aim of this study is to evaluate the relationship between patellofemoral contact stress and intraoperative knee kinematic patterns after mobile bearing total knee arthroplasty (TKA). Medial osteoarthritic knees of forty-six posterior-stabilized total knee prostheses were evaluated using a computed tomography-guided navigation system. Subjects were divided into two groups based on intraoperative knee kinematic patterns: the medial pivot group (n=19) and the non-medial pivot group (n=27). Mean intraoperative patello-femoral contact stress was significantly lower in the medial pivot group than in the non-medial pivot group (1.7MPa vs. 3.2MPa, P<0.05). An intraoperative medial pivot pattern results in reduced patello-femoral contact stress.

Effect of medial-lateral malpositioning of the femoral component in total knee arthroplasty on anterior knee pain at greater than 8 years of follow-up

BACKGROUND

The trochlea is often medialized after total knee arthroplasty (TKA) resulting in abnormal patellar tracking, which may lead to anterior knee pain. However, due to the difference in shape of the natural trochlea and the patellar groove of the femoral component, a medialization of the femoral component of 5 mm results in an equal patellar position at 0-30° of flexion. We tested the hypothesis that more medialization of the trochlea results in a higher VAS pain score and lower Kujala anterior knee pain score at midterm follow-up.

METHODS

During surgery a special instrument was used to measure the mediolateral position of the natural trochlea and the prosthetic groove in 61 patients between 2004 and 2005. Patient reported outcome measures were used to investigate the clinical results (NRS-pain, NRS-satisfaction, KOOS-PS and Kujala knee score).

RESULTS

In total 40 patients were included. The mean follow-up was 8.8 years. A medialization of ≥5 mm resulted in a significantly lower NRS-pain (0.2 vs. 1.4; p=0.004) and higher NRS-satisfaction (9.6 vs. 8.2; p=0.045). Overall clinical results were good; KOOS-PS was 33.9 and Kujala knee score was 72.1.

CONCLUSIONS

The present study showed that a more medial position may result in a better postoperative outcome, which can probably be explained by the non-physiological lateral orientation of the trochlear groove in TKA designs.

LEVEL OF EVIDENCE

Level III.

Patella resurfacing during total knee arthroplasty: have we got the issue covered?

Background

Management of the patella during total knee arthroplasty (TKA) is controversial. Multiple studies have examined mechanical and clinical results of TKA with native and resurfaced patellae with no clear consensus.

Methods

We surveyed a large cohort of consultant surgeons in a questionnaire based study in order to assess the indications for patella resurfacing and to correlate practice with degree of specialization, experience and volume of procedures performed.

Results

Six hundred and nineteen surgeons were included. The main indication for patella resurfacing was patellofemoral arthritis. The ratio of those who always:sometimes:never resurfaced was 1:2:1 irrespective of experience or volume performed. There was no difference between knee specialists and non-specialists (p = 0.977) or between high and lower volume surgeons (p = 0.826). Senior and high volume surgeons tended to always resurface.

Conclusions

The majority of surgeons only sometimes resurfaced the patella. The number who always and never resurfaced were similar. There was a tendency for more experienced and high volume surgeons to always resurface.

Do surgical patellar interventions restore patellar kinematics in fixed-bearing, cruciate-retaining total knee arthroplasty?: An in vitro study

Despite different surgical patellar interventions, the decision how to treat the patella during TKA remains controversial. The purpose of this study was to quantify the effect of different reconstructive patellar interventions on patellar kinematics during TKA using optical computer navigation. We implanted ten navigated TKAs in full body specimens. During passive motion, the effect of different surgical patellar interventions on patellar kinematics was analysed. A contrarily tilt behaviour was observed in the TKA group without patellar intervention compared to the natural knee. Lateral release led to similar tilt values (P < 0.05). All surgical interventions led to a 3 to 5mm medial shift of the patella (P < 0.05). None of the analysed surgical patellar interventions could restore natural patellar kinematics after TKA.

The effect of trochlea tilting on patellofemoral contact patterns after total knee arthroplasty: an in vitro study

INTRODUCTION

Patellofemoral complications are one major concern after total knee arthroplasty (TKA). Anterior knee pain is one of these complications and to a high percentage responsible for unsatisfied patients after TKA. Malrotation of the femoral component can contribute to retropatellar peak pressure and consequently to anterior knee pain.

MATERIALS AND METHODS

Eight fresh frozen cadavers were tested in a force-controlled knee rig after TKA during isokinetic flexing of the knee from 20° to 120° under constant load. By tilting the trochlea in the material of the created femoral component replicas, a rotation of the femoral component by 3° internal, 0° (neutral), 3° and 6° external rotation to transepicondylar line was simulated without changing flexion or extension gap. Retropatellar pressure distribution was measured during flexion and extension of the knee while quadriceps muscles and hamstring forces were applied.

RESULTS

Maximum peak pressure for internal rotation of the trochlea was 7.32 ± 2.31 MPa, in neutral position the pressure reduced slightly to 7.31 ± 2.12 MPa and during further external rotation of trochlea rotation a decrease from 3° with 7.18 ± 2.14 MPa to 6° with 6.22 ± 1.83 MPa was observed (p < 0.01). There was a tendency of lower quadriceps force with increasing external rotation of the trochlea (p = 0.08).

CONCLUSIONS

The implantation of the femoral component by 3° internal trochlea rotation to transepicondylar line resulted in a highly significant increase of the mean maximal retropatellar pressure compared to 6° external rotation of the trochlea of the femoral component (p < 0.01). A higher retropatellar pressure might lead to anterior knee pain after TKA. We recommend an external rotation of the femoral component between 3° and 6° to anatomical transepicondylar line to reduce the maximal retropatellar pressure, but only if adequate soft tissue balancing and stable knee kinematics are provided.

Better results with patelloplasty compared to traditional total knee arthroplasty

PURPOSE

The aim of this study was to compare the results of primary total knee arthroplasty with or without patelloplasty.

METHODS

We retrospectively reviewed 89 patients who had received total knee arthroplasty. In patelloplasty, the patellar cartilage was resected using a tangential saw cut, and in the traditional treatment, only the surrounding osteophytes were removed. The outcome was measured using radiographs, Knee Injury and Osteoarthritis Outcome Score, Oxford Knee Score, Knee Society Score, Knee Society Function Score and Knee Society Pain Score.

RESULTS

Patelloplasty patients had a better outcome according to the Oxford Knee Score (P = 0.012), Knee Injury and Osteoarthritis Outcome Score (P = 0.003) and all of the Knee Injury and Osteoarthritis Outcome Score subscales (P < 0.05). The patella was significantly thinner (P = 0.001) post-operatively in the patelloplasty patients, but there was no statistically significant correlation between Oxford Knee Score or Knee Injury and Osteoarthritis Outcome Score and post-operative patellar thickness in the patelloplasty group.

CONCLUSIONS

In this follow-up, patelloplasty was better than traditional treatment in relieving pain and improving function and quality of life.

Less anterior knee pain with a routine lateral release in total knee arthroplasty without patellar resurfacing: a prospective, randomized study

PURPOSE

Anterior knee pain is a major cause of complaint in total knee arthroplasty (TKA) without patellar resurfacing. The concept of improved patellar tracking and decreased retropatellar contact pressure for lateral retinacular release theoretically suggests that patients with lateral retinacular release in TKA would achieve a lower incidence of anterior knee pain when compared without lateral retinacular release. We sought to determine (1) whether those patients who received a routine lateral retinacular release in TKA would attain lower incidence of anterior knee pain as compared to patients who received TKA without lateral retinacular release and (2) whether lateral retinacular release would increase the lateral retinacular release-related complications.

METHODS

A total of 148 patients who underwent TKA with the use of the Gemini MK II mobile bearing were randomized to receive either routine lateral retinacular release (intervention group) or not (control group). Patients were assessed by the visual analogue scale for anterior knee pain, the Knee Society clinical scoring system of knee score and function score, and patellar score for clinical function. Patients' satisfaction and lateral retinacular release-related complications were also evaluated.

RESULTS

The overall incidence of anterior knee pain in the intervention group at 18 months follow-up was 5.6%, while that of the control group was 20.6% (p = 0.009). No statistical difference was detected between the two groups in terms of lateral retinacular release-related complications (n.s.), patients' satisfaction (n.s.), knee score (n.s.), function score (n.s.), and patellar score (n.s.) at 18 months follow-up.

CONCLUSION

The present study suggests that routine lateral retinacular release can reduce anterior knee pain and does not increase lateral retinacular release-related complications, in TKA with the use of the Gemini MK II mobile bearing without patellar resurfacing.

LEVEL OF EVIDENCE

Therapeutic, Level I.

No difference in patellar tracking between symmetrical and asymmetrical femoral component designs in TKA

PURPOSE

Poor knee extension function after total knee arthroplasty (TKA) is associated with factors including articular geometry and alignment. Femoral trochlear geometry has evolved from symmetrical to become more prominent proximal-laterally, with the groove aligned proximal-lateral to distal-medial. This study in vitro tested the hypothesis that a modern asymmetrical prosthesis would restore patellar tracking and stability to more natural behaviour than an older symmetrical prosthesis.

METHODS

Six knees had their patellar tracking measured optically during active knee extension. Medial-lateral force versus displacement stability was measured at fixed angles of knee flexion. The measurements were repeated after inserting each of the symmetrical and asymmetrical TKAs.

RESULTS

Significant differences of patellar lateral displacement stability, compared to normal, were not found at any angle of knee flexion. The patella tracked medial-laterally within 2.5 mm of the natural path with both TKAs. However, for both TKAs near knee extension, the patella was tilted laterally by approximately 6° and was also flexed approximately 8° more than in the natural knee.

CONCLUSION

The hypothesis was not supported: The more anatomical component design did not provide more anatomical patellar kinematics and stability.

Patellar resurfacing complications in total knee arthroplasty

PURPOSE

The ideal management of the patella during total knee arthroplasty (TKA) is still controversial. Patellar retention is generally associated with an increased rate of anterior knee pain; however, patient satisfaction is similar in cases of replacement or retention. When the patella is replaced, potential severe complications can occur. Aim of this study was to retrospectively review results of a continuous series of patients having been treated with TKA and patella resurfacing.

METHODS

The charts of 1,600 consecutive total knee prostheses were analysed to evaluate the rate of patellar resurfacing. All implants were posterior stabilized; 310 patients having received a patellar replacement were reviewed at follow-up (FU) examination. Complete physical examination as well as administration of the Hospital for Special Surgery (HSS) score was performed. X-rays analysis included weightbearing anteroposterior (AP) and lateral views of the injured knee and bilateral skyline views at 30° flexion.

RESULTS

Two hundred and eighty patients were available for clinical and imaging investigation at an average FU of 96 (58-144) months. Mean age at the time of surgery was 70 (62-80) years. Mean HSS score was 85.9 ± 7.6. The overall rate of patellofemoral complications was 7% (19 cases); 13 patients claimed anterior knee pain, five had symptomatic patellar maltracking and one had patellar component loosening.

CONCLUSION

Our data are in accordance with those available in the literature. Recent meta-analyses demonstrated lower risk of re-operation after patellar resurfacing. However, when complications of the resurfaced patella occur, they can be potentially catastrophic events.

The accuracy of component alignment in custom cutting blocks compared with conventional total knee arthroplasty instrumentation: prospective control trial

BACKGROUND

The purpose of this study was to assess whether custom cutting blocks improve accuracy of component alignment compared to conventional TKA instrumentation.

METHODS

Eighty primary TKA patients were enrolled in an open-label randomized prospective clinical trial and were divided into two groups, 40 custom cutting blocks and 40 conventional TKA instrumentations. The primary outcome was prosthetic alignment with respect to mechanical axis and epicondylar axis. Secondary outcomes included operative time, 24-hour postoperative blood loss and hemoglobin at discharged.

RESULTS

There were no statistical significant differences in the postoperative mechanical axis between the custom cutting blocks group and conventional TKA group, (95% vs. 87.5% within 3° of neutral mechanical alignment, p=0.192). The average rotational alignment was statistically significantly different in the custom cutting blocks group (1.0°±0.6° vs. 1.6°±1.8° external rotation from epicondylar axis, p<0.001). There were statistical significant differences in operation time between custom cutting blocks group and conventional group, skin to skin [57.5±2.3 min vs. 62.1±1.5, p<0.001]. We found an improvement in group 1 compared with group 2 regarding the proportion of patients with postoperative blood loss within 24 h.

CONCLUSIONS

Custom cutting blocks technique was a surgical procedure which provided better accuracy in rotational alignment but no statistical differences in mechanical axis, less operative time and reduced blood loss than the conventional TKA instrumentation in the majority of patients.

Medium-term evaluation of total knee arthroplasty without patellar replacement

Objective

To mid-term evaluate patients who were submitted to total knee arthroplasty without patellar resurfacing.

Methods

It was realized a retrospective cross-sectional study of patients who were submitted to total knee arthroplasty without patellar resurfacing. In all patients clinical examination was done based on the protocol of the Knee Society Scoring System, which assessed pain, range of motion, stability, contraction, knee alignment and function, and radiological evaluation.

Results

A total of 36 patients were evaluated. Of these, 07 were operated only on left knee, 12 only on right knee and 17 were operated bilaterally, totaling 53 knees. Ages ranged from 26 to 84 years. Of the 53 knees evaluated, 33 (62.26%) had no pain. The maximum flexion range of motion averaged 104.7°. No knee had difficulty in active extension. As to the alignment for anatomical axis twelve knees (22.64%) showed deviation between 0° and 4° varus. Thirty-nine (75.49%) knees showed pace without restriction and the femorotibial angle ranged between 3° varus and 13° valgus with an average of 5° valgus. The patellar index ranged from 0.2 to 1.1.

Conclusion

Total knee arthroplasty whitout patellar resurfacing provides good results in mid-term evaluation.

Comparison of clinical outcomes between patellar resurfacing and nonresurfacing in total knee arthroplasty: retrospective study of 130 cases

OBJECTIVE

To compare clinical outcomes between patellar resurfacing and nonresurfacing in total knee arthroplasty (TKA).

METHODS

Data from osteoarthritis patients who underwent TKA and were followed up for ≥ 9 years were analysed retrospectively. Patients were divided into two groups: patellar nonresurfacing group and patellar resurfacing group. In the nonresurfacing group, the partial lateral facet of the patella was removed, the patella was reshaped to match the trochlea of the femoral prosthesis and circumpatellar denervation was performed. In the resurfacing group, the patella was resurfaced with a cemented component. Clinical outcomes included incidence of anterior knee pain, Knee Society Score, patient satisfaction, revision rate and radiographic findings.

RESULTS

Of the 130 patients included, 71 were assigned to the nonresurfacing group and 59 to the resurfacing group. No significant between-group differences were observed for any clinical outcomes measured. The incidence of anterior knee pain was 14.1% (nonresurfacing group) and 5.1% (resurfacing group). The revision rate was 9.89% (nonresurfacing group) and 3.4% (resurfacing group).

CONCLUSION

Clinical outcomes for patellar nonresurfacing, including patelloplasty and circumpatellar denervation, are similar to those for patellar resurfacing, in TKA.

Patellofemoral contact patterns before and after total knee arthroplasty: an in vitro measurement

Background

Patellofemoral complications are one of the main problems after Total Knee Arthroplasty (TKA). Retropatellar pressure distribution after TKA can contribute to these symptoms. Therefore we evaluated retropatellar pressure distribution subdivided on the ridge, medial and lateral surface on non-resurfaced patella before and after TKA. Additionally, we analyzed axial femorotibial rotation and quadriceps load before and after TKA.

Methods

Seven fresh frozen cadaver knees were tested in a force controlled knee rig before and after TKA (Aesculap, Tuttlingen, Germany, Columbus CR) while isokinetic flexing the knee from 20° to 120° under weight bearing. Ridge, medial and lateral retropatellar surface were defined and pressure distribution was dynamically measured while quadriceps muscles and hamstring forces were applied. Aside axial femorotibial rotation and quadriceps load was recorded.

Results

There was a significant change of patella pressure distribution before and after TKA (p = 0.004). In physiological knees pressure distribution on medial and lateral retropatellar surface was similar. After TKA the ridge of the patella was especially in higher flexion grades strongly loaded (6.09 +/−1.31 MPa) compared to the natural knee (2.92 +/−1.15 MPa, p < 0.0001). Axial femorotibial rotation showed typical internal rotation with increasing flexion both before and after TKA, but postoperatively it was significantly lower. The average amount of axial rotation was 3.5° before and after TKA 1.3° (p = 0.001). Mean quadriceps loading after implantation of knee prosthesis did not change significantly (575 N ±60 N in natural knee and after TKA 607 N ±96 N; p = 0.28).

Conclusions

The increased retropatellar pressure especially on the ridge may be one important reason for anterior knee pain after TKA. The trochlea of the femoral component might highly influence the pressure distribution of the non-resurfaced retropatellar surface. Additionally, lower axial femorotibial rotation after TKA might lead to patella maltracking. Changing the design of the prosthesis or a special way of patella shaping might increase the conformity of the patella to trochlea to maintain natural contact patterns.

Influence of the sagittal reference axis on the femoral component size

The sagittal reference axes used for setting of the femoral component vary according to surgical methods. The purpose of the study was to clarify the relation of the sagittal reference axis with the anteroposterior (AP) length of the distal femur at the time of determining the femoral component size. Fifty consecutive varus osteoarthritic knees with primary total knee arthroplasty were divided into two groups according to surgical methods (intramedullary and extramedullary groups) and were examined based on CT data. AP length of the distal femur changed nearly 0.6mm corresponding to each 1° flexion of the sagittal reference axis. The size of the femoral component in the intramedullary group was larger than that in the extramedullary group. The sagittal reference axis had an influence on the component size.

Effect of total knee prosthesis design on patellar tracking and need for lateral retinacular release

Intraoperative lateral retinacular release (LRR) during primary total knee arthroplasty (TKA) is discouraged, except when LRR is necessary to centralize patellofemoral tracking. This study compares the LRR rates in four designs of total knee implants and correlates how changes in prosthesis design affect LRR rates. 2881 primary TKAs performed by one surgeon using a single surgical technique were reviewed. After controlling for all variables, LRR rates dropped from 71.6% to 19.5% to 9.7% to 2.7% with each design change (P<.0001). Differences in varus/valgus alignment and male/female proportions were compared in each group and the differences did not correlate with LRR rates. This study concludes that changes and improvements in knee implant designs play a significant role in decreasing lateral retinacular release rates in TKA.

Columbus navigated TKA system: clinical and radiological results at a minimum of 5 years with survivorship analysis

The major factors that determine a favorable long-term clinical and functional outcome after conventional total knee arthroplasty (TKA) include correct implant positioning and restoration of the mechanical axis with soft tissue balancing to reduce aseptic failure; hence, the need for further developmental strategies that improve the accuracy and reproducibility of the surgical technique remains paramount for contemporary navigation research. Not all navigation systems are the same. The literature published thus far on mid-term results of navigated TKA relies on software that has no step-by-step soft tissue balancing with the tibia-first technique. The results are equivalent to those of conventional TKA.Therefore, the current authors conducted a minimum 5-year follow-up of a soft tissue-based navigated TKA system with the goal of soft tissue balancing. They analyzed intraoperative alignment and range of motion measurements, functional outcomes, radiographic assessment, and survival rates of high-flexion, high-conformity unresurfaced patella TKAs. The results at 5 years revealed a component revision rate of 0% compared with other nonnavigated TKAs (2.8% revision rate). The authors achieved a well-balanced TKA with a 0°±2° mechanical axis and an improved range of motion from 95° preoperatively to 110° postoperatively.

The influence of patellar resurfacing on patellar kinetics and retropatellar contact characteristics

BACKGROUND

Femoropatellar complications are one of the most common problems after total knee arthroplasty (TKA). However, the question of whether to resurface the patella remains controversial. Therefore, we evaluated the kinetics and the retropatellar contact characteristics of patella resurfacing with fixed and gliding surfaces.

METHODS

Eight Thiel-embalmed cadaver knees were tested--first intact, then after TKA without patellar resurfacing, and finally with additional patellar resurfacing--while flexing the knee from 0° to 100°. We tested a fixed as well as a gliding patella surface. During the examination, quadriceps and hamstring forces were applied. The retropatellar pressure was determined with a special patella sensor, and the patellar kinetics were measured using an optical three-dimensional motion analysis system.

RESULTS

Resurfacing the patella caused a significant increase in retropatellar pressure and a significant decrease in retropatellar contact area. Using a fixed patella, the retropatellar pressure nearly quadrupled in higher flexion compared to the native patella. Furthermore, the lateral movement of the patella increased after TKA, especially after additional patellar resurfacing.

CONCLUSIONS

Resurfacing the patella routinely is not advised. When osteoarthritis of the patella is found, the gliding patella should be preferred.

Biomechanical effects of joint line elevation in total knee arthroplasty

BACKGROUND

Inadequate restoration of the knee joint line after total knee arthroplasty may lead to a poor clinical outcome. The purpose of this study was to quantitatively assess the effects of joint line elevation following total knee arthroplasty with increased joint volume on patellofemoral contact kinematics.

METHODS

Six cadaveric specimens were tested. Patellofemoral contact area, contact pressure, and kinematics were measured following total knee arthroplasty with an anatomic joint line and after 4 and 8mm of joint line elevation, at knee flexion angles of 0°, 30°, 60°, 90° and 120°. Repeated measures analysis of variance with a Tukey post hoc test with a significance level of 0.05 was used for statistical analyses.

FINDINGS

There was a decrease in contact area with joint line elevation at flexion angles of 60°, 90° and 120° (P=0.009-0.04). There was a significant increase in contact pressure only at 30° of knee flexion with 8mm of joint line elevation (P=0.004). Three of the six specimens showed inferior edge loading of the patella component following 8mm of joint line elevation at 120° of knee flexion. The sagittal plane patellofemoral angle increased significantly with joint line elevation except for 0° knee flexion (P=0.0002-0.02).

INTERPRETATION

Knee joint line elevation with increased knee volume significantly affects patellofemoral contact area and kinematics and produced inferior edge loading/impingement between the patella and tibial components, this may result in loss of knee range of motion, postoperative pain, and premature component wear.

Surgical technique: Lateral retinaculum release in knee arthroplasty using a stepwise, outside-in technique

BACKGROUND

Lateral release of a tight lateral retinaculum in a TKA is intended to correct patellar maltracking but the widely used inside-out technique has associated risks. We describe an alternate stepwise outside-in technique, with titrated release intended to maximize the chance of preserving the superior lateral genicular artery (SLGA).

DESCRIPTION OF TECHNIQUE

Patellar maltracking was judged by a no-thumb technique and graded as I and Ia: normal and near normal tracking; II: patella tilted; III: patella subluxed; or IV: patella dislocated. Outside-in release was performed in three progressive steps. Step-1 release was from the midpatella to the upper tibial border, Step-2 release was from the midpatella to the proximal pole of the patella, and Step-3 release was proximal to the superior pole of the patella with sectioning of the SLGA.

METHODS

We retrospectively reviewed records of 1884 patients operated on between 2002 to 2008. Two hundred five patients (11%) had lateral release performed, and 177 of those 205 patients (86%) were reviewed. Patellofemoral function was assessed clinically by The Knee Society score. Radiographs were examined for patellar tilt, shift, and avascular necrosis. The minimum followup was 22 months (median 48 months; range, 22-105 months).

RESULTS

The SLGA was preserved in 155 (76%) patients. At last followup, no patient had patellar maltracking, patellar fracture, or avascular necrosis. Six of 177 (3%) patients had anterior knee pain. Female patients and high-flex components had a higher incidence of release and midvastus arthrotomy had a lower incidence of release.

CONCLUSIONS

Stepwise release of the lateral retinaculum by an outside-in technique allowed minimum necessary retinacular release, preserving the SLGA in 76% of patients. No complications were seen at followup with functional and radiographic examinations.

LEVEL OF EVIDENCE

Level IV, therapeutic study. See the Guidelines for Authors for a complete description of levels of evidence.

Five-year results of total knee arthroplasty with the Vario Knee System: a prospective analysis

There have been no published reports detailing the clinical performance of the Vario Knee System (VKS) total knee arthroplasty (TKA) since its introduction in 2001. The current study was therefore undertaken to provide 5-year clinical and radiographic follow-up data for this implant. Over a 24-month period, 146 VKS TKAs were performed in 131 patients (mean age, 69 years). Prospective data and radiographs were obtained at 3 months, 1 year, and 5 years after surgery. Surgeons employed an anteromedial approach in which the cruciate was retained. The fixation method was hybrid (cemented tibia, uncemented femur) in 70% of patients, uncemented in 23%, and cemented in 7%. At 5 years, 106 patients (118 knees) were alive. Six patients (six knees) were lost to follow-up. Three knees (three patients) were revised. Five-year survival was 97.4% (95% confidence interval [CI]: 92.8-99.5) with an endpoint of revision for any reason and 99.0% (95% CI: 97.5-100) with an endpoint of revision for aseptic failure. Using the worst-case scenario, in which all six of these patients were considered as failures, survival was 91.4% (95% CI: 83.4-96.0). The mean preoperative knee and function scores improved from 37.5 and 62.1, respectively, to 90.6 and 97.4, respectively, 5 years after surgery. Radiographic loosening of either component was not observed in any of the 100 radiographs obtained. In conclusion, good clinical outcomes were observed after 5 years with the VKS TKA. Additional follow-up studies will be needed to ascertain whether this performance is maintained in the long term.

The controversy of patellar resurfacing in total knee arthroplasty: Ibisne in medio tutissimus?

Early arthroplasty designs were associated with a high level of anterior knee pain as they failed to cater for the patello-femoral joint. Patellar resurfacing was heralded as the saviour safeguarding patient satisfaction and success but opinion on its necessity has since deeply divided the scientific community and has become synonymous to topics of religion or politics. Opponents of resurfacing contend that the native patella provides better patellar tracking, improved clinical function, and avoids implant-related complications, whilst proponents argue that patients have less pain, are overall more satisfied, and avert the need for secondary resurfacing. The question remains whether complications associated with patellar resurfacing including those arising from future component revision outweigh the somewhat increased incidence of anterior knee pain recorded in unresurfaced patients. The current scientific literature, which is often affected by methodological limitations and observer bias, remains confusing as it provides evidence in support of both sides of the argument, whilst blinded satisfaction studies comparing resurfaced and non-resurfaced knees generally reveal equivalent results. Even national arthroplasty register data show wide variations in the proportion of patellar resurfacing between countries that cannot be explained by cultural differences alone. Advocates who always resurface or never resurface indiscriminately expose the patella to a random choice. Selective resurfacing offers a compromise by providing a decision algorithm based on a propensity for improved clinical success, whilst avoiding potential complications associated with unnecessary resurfacing. Evidence regarding the validity of selection criteria, however, is missing, and the decision when to resurface is often based on intuitive reasoning. Our lack of understanding why, irrespective of pre-operative symptoms and patellar resurfacing, some patients may suffer pain following TKA and others may not have so far stifled our efforts to make the strategy of selective resurfacing succeed. We should hence devote our efforts in defining predictive criteria and indicators that will enable us to reliably identify those individuals who might benefit from a resurfacing procedure. Level of evidence V.

Periprosthetic fractures around total knee arthroplasty

INTRODUCTION

The number of total knee arthroplasties performed continues to rise annually and it would be expected that complications, which include periprosthetic fractures, will also therefore become more commonplace. This article reviews the current literature regarding this injury and identifies the treatment principles that enable patients to regain optimal function.

METHODS

A comprehensive search of the Pubmed and Embase™ databases was performed to identify relevant articles. Keywords and MeSH (Medical Subject Headings) terms included in the search strategy were 'periprosthetic fracture(s)', 'femur', 'tibia', 'patella(r)', 'complication(s)', 'failure(s)', 'risk(s)', 'prevalence', 'incidence', 'epidemiology' and 'classification(s)'. The search was limited to all articles published in English and reference lists from the original articles were reviewed to identify pertinent articles to include in this review. A total number of 43 studies were identified.

RESULTS

Common treatment aims have been identified when managing patients with a periprosthetic fracture around total knee arthoplasty. The main criterion that determines which option to choose is the degree of remaining bone stock and the amount of fracture displacement.

CONCLUSIONS

Treatment of a periprosthetic fracture around total knee arthroplasty will either be non-operative, osteosynthesis or revision arthroplasty. It is imperative that a suitable option is chosen and based on the published literature, pathways are outlined to aid the surgeon.

Identifying alignment parameters affecting implanted patellofemoral mechanics

Complications of the patellofemoral (PF) joint remain a common cause for revision of total knee replacements. PF complications, such as patellar maltracking, subluxation, and implant failure, have been linked to femoral and patellar component alignment. In this study, a dynamic finite element model of an implanted PF joint was applied in conjunction with a probabilistic simulation to establish relationships between alignment parameters and PF kinematics, contact mechanics, and internal stresses. Both traditional sensitivity analysis and a coupled probabilistic and principal component analysis approach were applied to characterize relationships between implant alignment and resulting joint mechanics. Critical alignment parameters, and combinations of parameters, affecting PF mechanics were identified for three patellar designs (dome, modified dome, and anatomic). Femoral internal-external (I-E) alignment was identified as a critical alignment factor for all component designs, influencing medial-lateral contact force and anterior-posterior translation. The anatomic design was sensitive to patellar flexion-extension (F-E) alignment, while the dome, as expected, was less influenced by rotational alignment, and more by translational position. The modified dome was sensitive to a combination of superior-inferior, F-E, and I-E alignments. Understanding the relationships and design-specific dependencies between alignment parameters can aid preoperative planning, and help focus instrumentation design on those alignment parameters of primary concern.

Patellar reshaping versus resurfacing in total knee arthroplasty - Results of a randomized prospective trial at a minimum of 7 years' follow-up

OBJECTIVE

To compare the results of primary total knee arthroplasty with patellar reshaping or resurfacing.

METHODS

One hundred thirty-three patients were randomized into patellar reshaping group and patellar resurfacing group. Patellar reshaping includes resecting the partial lateral facet of the patella and the osteophytes surrounding the patella, trimming the patella to match the trochlea of the femoral component. The minimum follow-up time was 7 years. The outcome was measured by anterior knee pain rate, Knee Society clinical score, and radiographs.

RESULTS

Eight patients in the reshaping group (12.5%) and 10 patients in the resurfacing group (14.7%) complained of anterior knee pain (P=0.712). Meanwhile, there were no significant differences between the two groups in terms of total Knee Society score, Knee Society pain score, Knee Society function score, as well as anterior knee pain rate.

CONCLUSIONS

With the numbers available, there was no significant difference between the groups treated with patellar reshaping or patellar resurfacing with regard to the KSS, anterior knee pain rate and radiographs. We prefer reshaping the patella to resurfacing the patella because the former preserves sufficient patellar bone stock and can easily be converted to patellar replacement if patients complain of recurrent anterior knee pain.

[Anatomy and biomechanics of the patellofemoral joint: physiological conditions and changes after total knee arthroplasty]

The patellofemoral joint constitutes a complex anatomical and functional entity. The tensile force of the quadriceps femoris muscle is transmitted through the patella and patellar ligament onto the tibial tuberosity. This particular three-dimensional arrangement increases the torsional moment acting on the knee joint. Dynamic alignment of the patella is determined by trochlear geometry and is supported by active muscular and passive connective tissue stabilizers. In addition to the retinaculum of the patella, the medial patellofemoral ligament is attracting increasing clinical attention. Multidirectional motion of the patella is closely connected to retropatellar pressure distribution which can be modulated by moving the patellar ligament insertion. Implantation of a knee endoprosthesis changes the joint surface geometry and consequently patella kinematics and retropatellar pressure distribution. Finite element analysis provides the possibility to assess retropatellar pressure distribution before and after implantation of prostheses.

Comparison of patellar retention versus resurfacing in LCS mobile-bearing total knee arthroplasty

PURPOSE

The aim of this retrospective study was to compare clinical outcomes of total knee arthroplasty (TKA) with and without patellar resurfacing using the Low Contact Stress (LCS) mobile-bearing prosthesis in 275 osteoarthritic knees (199 patients) after a minimum of 7 years of follow-up.

METHODS

Patients were divided into a patellar retention group (132 knees) and a resurfacing group (143 knees), with median follow-up durations of 7.8 years (range, 7-8.5 years) and 8.5 years (range, 7-10.6 years), respectively. The demographics of the two groups were otherwise matched. The patelloplasty was performed for patellar retention. Patients were evaluated by a blinded, independent observer using Feller's patellar score, the Knee Society score, patient satisfaction, patellar tilt, and lateral displacement.

RESULTS

Patellar resurfacing was not superior to retention with respect to any of the measured variables. Eight knees (6.1%) without and 6 (4.2%) with patellar resurfacing had anterior knee pain related to the patellofemoral joint (n.s.). The reoperation rate related to the patellofemoral joint was 0.8% (n = 1) in the retention group compared with 2.8% (n = 4) in the resurfacing group (n.s.). In the 35 patients who underwent bilateral TKA with patellar resurfacing on only one side, there were no significant differences between the two sides in subjective preference, clinical scores, or functional ability.

CONCLUSIONS

The clinical and radiographic outcomes of TKA with the LCS mobile-bearing prosthesis showed no significant difference between the two groups after a minimum of 7 years of follow-up. The findings in this study suggest that patellar retention with a patelloplasty may be viable as a routine procedure, even in knees with advanced patellofemoral arthritis, if soft tissue balancing and a patella-friendly prosthetic design are properly used.

LEVEL OF EVIDENCE

Therapeutic, retrospective, comparative study, Level III.

Patellar resurfacing as a second stage procedure for persistent anterior knee pain after primary total knee arthroplasty

PURPOSE

Knee pain after total knee arthroplasty may be caused by an unresurfaced patella. Secondary isolated resurfacing of the previously unresurfaced patella in total knee arthroplasty remains controversial. The aim of this retrospective study was to evaluate the outcome after patellar resurfacing as a second stage procedure.

METHODS

The study included 22 patients (13 female/nine male) who underwent resurfacing of the patella with a mean follow-up of 61.8 ± 39.2 months. The mean age of the patients was 60 ± 9.7 years at the time of operation. The average period between total knee arthroplasty and patellar resurfacing was 26.3 ± 15.2 months. The patient's subjective satisfaction was assessed by a custom-made questionnaire.

RESULTS

The mean Knee Society Score improved significantly from 60.1 ± 8.3 to 77.0 ± 6.3 (p = 0.0063). The mean functional score also improved significantly from 42.7 ± 2.3 to 60.2 ± 3.9 (p = 0.001). Three patients (13.6%) needed further operative revision.

CONCLUSIONS

Although clinical scores showed significant improvement some patients continued to have pain and remained dissatisfied without detecting a specific reason. Further studies are needed to better elucidate the benefit of patellar resurfacing as second stage procedure.

Similar TKA designs with differences in clinical outcome: a randomized, controlled trial of 77 knees with a mean follow-up of 6 years

BACKGROUND AND PURPOSE

To try to improve the outcome of our TKAs, we started to use the CKS prosthesis. However, in a retrospective analysis this design tended to give worse results. We therefore conducted a randomized, controlled trial comparing this CKS prosthesis and our standard PFC prosthesis. Because many randomized studies between different TKA concepts generally fail to show superiority of a particular design, we hypothesized that these seemingly similar designs would not lead to any difference in clinical outcome.

PATIENTS AND METHODS

82 patients (90 knees) were randomly allocated to one or other prosthesis, and 39 CKS prostheses and 38 PFC prostheses could be followed for mean 5.6 years. No patients were lost to follow-up. At each follow-up, patients were evaluated clinically and radiographically, and the KSS, WOMAC, VAS patient satisfaction scores and VAS for pain were recorded.

RESULTS

With total Knee Society score (KSS) as primary endpoint, there was a difference in favor of the PFC group at final follow-up (p = 0.04). Whereas there was one revision in the PFC group, there were 6 revisions in the CKS group (p = 0.1). The survival analysis with any reoperation as endpoint showed better survival in the PFC group (97% (95% CI: 92-100) for the PFC group vs. 79% (95% CI: 66-92) for the CKS group) (p = 0.02).

INTERPRETATION

Our hypothesis that there would be no difference in clinical outcome was rejected in this study. The PFC system showed excellent results that were comparable to those in previous reports. The CKS design had differences that had considerable negative consequences clinically. The relatively poor results have discouraged us from using this design.

The influence of malrotation and femoral component material on patellofemoral wear during gait

Complications involving the patellofemoral joint, caused by malrotation of the femoral component during total knee replacement, are an important cause of persistent pain and failure leading to revision surgery. The aim of this study was to determine and quantify the influence of femoral component malrotation on patellofemoral wear, and to determine whether or not there is a difference in the rate of wear of the patellar component when articulated against oxidised zirconium (OxZr) and cobalt-chrome (CoCr) components. An in vitro method was used to simulate patellar maltracking for both materials. Both rates of wear and changes in height on the patellar articular surface were measured. The mean rates of wear measured were very small compared to standard tibiofemoral wear rates. When data for each femoral component material were pooled, the mean rate of wear was 0.19 mm3/Mcycle (sd 0.21) for OxZr and 0.34 mm3/Mcycle (sd 0.335) for CoCr. The largest change in height on each patella varied from -0.05 mm to -0.33 mm over the different configurations.

The results suggest that patellar maltracking due to an internally rotated femoral component leads to an increased mean patellar wear. Although not statistically significant, the mean wear production may be lower for OxZr than for CoCr components.

Influence of total knee arthroplasty on patellar kinematics and contact characteristics

PURPOSE

Femoro-patellar complications are one of the most common problems after total knee arthroplasty (TKA). TKA components that reduce patellar loads and preserve physiological patellar kinematics should reduce these problems. Therefore, we evaluated the patellar kinematics and the retro-patellar contact characteristics in both the intact knee and in the TKA-knee.

METHODS

Eight Thiel-embalmed cadaver knees were tested first intact and then after TKA using rotating as well as gliding inlay and with additional patellar resurfacing while flexing the knee from 0° to 100°. During the examination quadriceps and hamstring forces were applied.

RESULTS

TKA with additional patellar resurfacing led to an increased retro-patellar pressure, a decreased contact area and an increased lateral movement. Although patellar kinematics could not be changed by using a gliding inlay compared to a rotating inlay, the gliding inlay improved retro-patellar contact characteristics by reducing the pressure and increasing the contact area, especially in higher flexion.

CONCLUSIONS

The increased retro-patellar pressure together with the increased lateral movement of the patella after TKA may be one important cause for anterior knee pain appearing after TKA. In view of the improved retro-patellar contact characteristics using a gliding inlay this inlay should be preferred, providing that the posterior cruciate ligament is intact.

Are current total knee arthroplasty implants designed to restore normal trochlear groove anatomy?

Biomechanical studies have shown that external rotation of the femoral TKA component improves patellar tracking but does not restore it to physiologic values. We hypothesized that this could be due to differences in the trochlear groove geometry of TKA and normal knees. This was investigated via a virtual TKA procedure that mounted femoral components on to 3-dimensional models of healthy femurs, followed by measurement of the trochlear geometry before and after the simulated TKA. The results showed that (1) external rotation of the component brought the trochlear groove closer to normal anatomy than no external rotation; (2) however, even with external rotation, the trochlear anatomy was only partially restored to normal. Further work is needed to determine implications for patellofemoral complications observed with current TKA designs.

Extensor malalignment arising from femoral component malrotation in knee arthroplasty: effect of rotating-bearing

BACKGROUND

many patellofemoral complications such as anterior knee pain, subluxation, fracture, wear, and aseptic loosening after total knee arthroplasty are attributed to malrotation of the femoral component. Rotating-platform mobile bearings can reduce malrotation between the tibial and femoral components and may also improve patellofemoral maltracking.

METHODS

a computer model (LifeMOD/KneeSIM) of a weight-bearing deep knee bend was validated using cadaver knees tested in an Oxford-type knee rig. Changes in knee kinematics and patellofemoral forces were measured after femoral component malrotation of ± 3°. The effect of a rotating-bearing on these kinematics and forces was determined.

FINDINGS

in a fixed-bearing arthroplasty femoral component internal malrotation increased tibiofemoral internal rotation by 3.4°, and external malrotation increased tibiofemoral external rotation by 4°. Femoral component malrotation affected patellofemoral lateral shift by up to 2.5mm, and patellofemoral lateral shear by up to 19N. When the malrotated femoral component was tested against a rotating-bearing the change in tibiofemoral rotation and patellofemoral lateral shift was less than 1° and 1mm respectively. The rotating-bearing reduced peak lateral shear by 7N and peak medial shear by 17N. Increasing the conformity of the rotating-bearing reduced changes in tibiofemoral rotation due to femoral malrotation and increased the net rotation of the bearing (by approximately 5°) during flexion.

INTERPRETATION

our results are consistent with one randomized clinical outcome study and emphasize the value of computational modeling for preclinical design evaluation. It is important to continue to improve existing methodologies for accurate femoral component alignment especially in rotation.

The need for patellar resurfacing in total knee arthroplasty: a literature review

The controversy over whether or not to routinely resurface the patella during a total knee arthroplasty has persisted despite three decades of successful joint replacement procedures. Advocates for routine patellar resurfacing admit the occasional need for secondary patellar resurfacing and declare increased incidence of anterior knee pain in patients with non-resurfaced patellae as a cause for worry. Surgeons that leave the patella unresurfaced cite avoidance of complications that include patellar fracture, avascular necrosis, patellar tendon injury and instability. This review discusses the available literature on patellar resurfacing through an evidence-based analysis of randomized and pseudo-randomized controlled trials and published meta-analyses to date. The published literature seems to favour resurfacing the patellar routinely. Selective patellar resurfacing would be the ideal solution if sound pre-operative criteria could be established. So far, a method for accurately predicting which patients can avoid patellar resurfacing has not been found. Future research looking at patellar resurfacing should concentrate on developing criteria for selecting those patients that would benefit from patellar resurfacing and those that would do as well without resurfacing, and thus, limiting potential surgical complications.

Systematic review of patellar resurfacing in total knee arthroplasty

Controversies existing over resurfacing the patella in total knee arthroplasty remain in the literature. The purpose of this review was to evaluate the effectiveness of resurfacing versus nonresurfacing the patella in total knee arthroplasty. We searched the Cochrane Library, MEDLINE and EMBASE for published randomised clinical trials relevant to patellar resurfacing. The relative risk of reoperation was significantly lower for the patellar resurfacing group than for the nonresurfacing group (relative risk 0.57, 95% confidence interval 0.38-0.84, P =0.004). The overall incidence of postoperative anterior knee pain of the 1,421 knees included was 12.9% in the patellar resurfacing group and 24.1% in the nonresurfacing group. The existing evidence indicates that patellar resurfacing can reduce the risk of reoperation with no improvement in postoperative knee function or patient satisfaction over total knee arthroplasty without patellar resurfacing. Whether it can decrease the incidence of anterior knee pain remains uncertain.

Isolated resurfacing of the previously unresurfaced patella total knee arthroplasty

Postoperative anterior knee pain can be challenging after primary total knee arthroplasty. Isolated patellar resurfacing may provide symptomatic improvement in those patients with an unresurfaced patella. Seventeen isolated patellar resurfacing procedures were performed. Patient outcomes were evaluated using the Knee Society clinical and roentgenographic evaluation systems. Continued symptomatology and overall patient satisfaction were also analyzed. No revisions have been necessary at 47 months of follow-up. Overall, Knee Society knee scores and knee function scores significantly improved. Eight patients (53%) are asymptomatic and were satisfied with the procedure, whereas 7 patients (47%) continue to have anterior knee pain and are unsatisfied. Isolated patellar resurfacing for anterior knee pain in total knee arthroplasty with an unresurfaced patella has a low morbidity and revision rate but may not provide patients with predictable symptomatic improvement.

Muscle torque in total knee arthroplasty: comparison of subvastus and midvastus approaches

The subvastus and midvastus approaches are two of the most commonly performed quadriceps preserving approaches for total knee arthroplasty (TKA), which can hasten functional recovery and rehabilitation. However, there has not been sufficient investigation with respect to a quantitative comparison between the two approaches in terms of muscle strength. To compare outcomes with respect to muscle strength between these two approaches, quadriceps and hamstring muscle torques of 20 patients who underwent primary TKA with the subvastus (SV) approach and 10 patients who received the midvastus (MV) approach were measured after surgery. The median age of patients in the SV group (68 years, range 53-77 years) was significantly different that the median age of patients in the MV group (61 years, range 50-73 years) (P = 0.0141). There was no significant difference in patient weight, height, or postoperative duration before muscle testing between the SV and MV groups. There were no significant differences in peak muscle torque or hamstring/quadriceps (H/Q) ratio between the groups. We thus conclude peak muscle torque and H/Q ratios were not statistically different with the SV or MV approach, therefore functional outcome is comparable.

Patella in total knee arthroplasty: to resurface or not to--a cohort study of staged bilateral total knee arthroplasty

The aim of this study was to assess medium term results of patellar resurfacing in total knee arthroplasty, specifically looking at anterior knee pain, patellofemoral function and need for reoperation. A prospective cohort study was conducted with patients undergoing staged bilateral knee arthroplasty with the patella being resurfaced only on one side. This was due to change in the clinical practice of the senior author. Sixty patients were reviewed clinically and radiologically on a regular basis. The surgery was either performed or supervised by the senior author in all cases. All patients received the cemented press-fit condylar© prosthesis. The Knee Society clinical rating system was used. Scores were recorded pre-operatively and post-operatively at three months, one year, two years and three yearly thereafter. The mean age of patients in the study group was 75 years (range: 62-89 years). There were 42 women and 18 men in the study. The mean duration of follow-up was 4.5 years (range: 2-12 years). There was no significant difference in the pre-operative scores in both groups. There were significantly better scores (p < 0.05) on the resurfaced side as compared to the non-resurfaced side at final follow-up. No revision was carried out for patellofemoral complications on the resurfaced side. Four patients required revision in the form of patellar resurfacing on the non-resurfaced side for persistent anterior knee pain. Patellar resurfacing is recommended in total knee arthroplasty for better functional outcome with regards to anterior knee pain and patellofemoral function.

The influence of malrotation of the femoral component in total knee replacement on the mechanics of patellofemoral contact during gait: an in vitro biomechanical study

Malrotation of the femoral component is a cause of patellofemoral maltracking after total knee arthroplasty. Its precise effect on the patellofemoral mechanics has not been well quantified. We have developed an in vitro method to measure the influence of patellar maltracking on contact. Maltracking was induced by progressively rotating the femoral component either internally or externally. The contact mechanics were analysed using Tekscan. The results showed that excessive malrotation of the femoral component, both internally and externally, had a significant influence on the mechanics of contact. The contact area decreased with progressive maltracking, with a concomitant increase in contact pressure. The amount of contact area that carries more than the yield stress of ultra-high molecular weight polyethylene significantly increases with progressive maltracking. It is likely that the elevated pressures noted in malrotation could cause accelerated and excessive wear of the patellar button.