Gelatin nanoencapsulation of protein/peptide drugs using an emulsifier-free emulsion method

Three-dimensional electrospun ECM-based hybrid scaffolds for cardiovascular tissue engineering

Electrospinning using natural proteins or synthetic polymers is a promising technique for the fabrication of fibrous scaffolds for various tissue engineering applications. However, one limitation of scaffolds electrospun from natural proteins is the need to cross-link with glutaraldehyde for stability, which has been postulated to lead to many complications in vivo including graft failure. In this study, we determined the characteristics of hybrid scaffolds composed of natural proteins including collagen and elastin, as well as gelatin, and the synthetic polymer poly(epsilon-caprolactone) (PCL), so to avoid chemical cross-linking. Fiber size increased proportionally with increasing protein and polymer concentrations, whereas pore size decreased. Electrospun gelatin/PCL scaffolds showed a higher tensile strength when compared to collagen/elastin/PCL constructs. To determine the effects of pore size on cell attachment and migration, both hybrid scaffolds were seeded with adipose-derived stem cells. Scanning electron microscopy and nuclei staining of cell-seeded scaffolds demonstrated the complete cell attachment to the surfaces of both hybrid scaffolds, although cell migration into the scaffold was predominantly seen in the gelatin/PCL hybrid. The combination of natural proteins and synthetic polymers to create electrospun fibrous structures resulted in scaffolds with favorable mechanical and biological properties.

Delivery of plasmid IGF-1 to chondrocytes via cationized gelatin nanoparticles

The objective of the present study was to investigate the use of gelatin and cationized-gelatin nanoparticles for the nonviral delivery of the plasmid DNA encoding for insulin-like growth factor (IGF)-1 to adult canine articular chondrocytes in vitro; plasmid for enhanced green fluorescence protein (EGFP) was used as a marker gene. The spherical cationized gelatin nanoparticles were on average 172 nm in diameter, compared with the often ellipsoid-shaped unmodified (noncationized) gelatin particles that generally appeared to be 10 mum to greater than 20 mum in length. The zeta potential of the positively charged cationized gelatin nanoparticles containing the plasmid was around 20 mV compared with about 2 mV for the unmodified gelatin particles. There was no noticeable fluorescence from the cells treated with the nanoparticles prepared with the original (noncationized) gelatin particles containing the pEGFP. In contrast, numerous cells in the group transfected with the cationized gelatin-pEGFP nanoparticles were found to fluoresce demonstrating the transfection of the cells. There was five-fold elevation in the amount of IGF-1 produced by the cells treated with the cationized gelatin nanoparticles containing the IGF-1 plasmid compared with the unmodified (noncationized) gelatin particles. There was a clear effect of varying the weight ratio of plasmid IGF-1 in the cationized gelatin nanoparticles on the IGF-1 in the medium of cells exposed to the nanoparticles for 5 h. A peak in the amount of released IGF-1 was detected at a gelatin:IGF-1 weight ratio of 250:1.

Review of novel particulate antigen delivery systems with special focus on treatment of type I allergy

For the treatment of infectious diseases, cancer and allergy, the directed induction of an appropriate immune response is the ultimate goal. Therefore, with the development of pure, often very small proteins, peptides or DNA by molecular biology techniques, the research for suitable adjuvants or delivery systems became increasingly important. Particle formulations are made of a variety of materials, including lipids, proteins or amino acids, polysaccharides, polyacrylic substances or organic acids. Microparticles serve as vehicles and provide a depot for the entrapped or coupled antigen. The release occurs in a pulsatile or continuous manner, a feature, which is well controllable for many particulate systems. Particles attract antigen presenting cells to the administration site, thereby guaranteeing the efficient presentation of the antigen to the immune system. Importantly, particles also protect the entrapped substance. This is especially necessary after oral application to avoid gastric or tryptic breakdown. In this article, the design and construction of different antigen delivery systems and their immune effects, with special focus on the suitability for allergy treatment, are discussed.

Electrospinning of gelatin fibers and gelatin/PCL composite fibrous scaffolds

In this article, ultrafine gelatin (Gt) fibers were successfully produced with the use of the electrical spinning or electrospinning technique. A fluorinated alcohol of 2,2,2-trifluoroethanol (TFE) was used as the dissolving solvent. The morphology of the electrospun gelatin fibers was found to be dependent on the alteration of gelatin concentration ranging from 2.5% w/v to 12.5% w/v at 2.5% increment intervals. Based on the electrospun gelatin fibers obtained, 10% w/v gelatin/TFE solution was selected and mixed with 10% w/v poly(epsilon-caprolactone) (PCL) in TFE at a ratio of 50:50 and co-electrospun to produce gelatin/PCL composite membranes. Contact-angle measurement and tensile tests indicated that the gelatin/PCL complex fibrous membrane exhibited improved mechanical properties as well as more favorable wettability than that obtained from either gelatin or PCL alone. The gelatin/PCL fibrous membranes were further investigated as a promising scaffold for bone-marrow stromal cell (BMSC) culture. Scanning electron microscopy (SEM) and laser confocal microscopy observations showed that the cells could not only favorably attach and grow well on the surface of these scaffolds, but were also able to migrate inside the scaffold up to 114 microm within 1 week of culture. These results suggest the potential of using composite gelatin/PCL fibrous scaffolds for engineering three-dimensional tissues.

A genipin-crosslinked gelatin membrane as wound-dressing material: in vitro and in vivo studies

A naturally occurring crosslinking agent (genipin) was used in this study to crosslink gelatin hydrogel to develop a wound-dressing membrane. The study was to investigate the in vitro characteristics of the genipin-crosslinked gelatin membrane. The glutaraldehyde-crosslinked counterpart, at a similar crosslinking degree, was used as control. Additionally, an in vivo experiment was undertaken to study the wound healings covered with the glutaraldehyde- and genipin-crosslinked dressings in a rat model. The in vitro results obtained suggested that crosslinking of gelatin membranes with glutaraldehyde or genipin may produce distinct crosslinking structures. The differences in crosslinking structure can significantly affect the mechanical property, water-vapor-transmission rate, swelling ratio, degradation against enzyme and cellular compatibility of the crosslinked membranes. In the in vivo study, it was found that the degree of inflammatory reaction for the wound treated with the genipin-crosslinked dressing was significantly less severe than that covered with the glutaraldehyde-crosslinked dressing throughout the entire course of the study. Additionally, the healing rate for the wound treated with the genipin-crosslinked dressing was notably faster than its glutaraldehyde-crosslinked counterpart.

Cytotoxicity evaluation of gelatin sponges prepared with different cross-linking agents

Gelatin is a natural polymer used in pharmaceutical and medical applications, especially in the production of biocompatible and biodegradable wound dressings and drug delivery systems. Gelatin granules hydrate, swell and solubilize in water, and rapidly degrade in vivo. The durability of these materials could, however, be prolonged by cross-linking by aldehydes, carbodiimides, and aldose sugars, but the biocompatibility of collagenous biomaterials is profoundly influenced by the nature and extent of cross-linking. In this study, gelatin sponges were prepared by using various cross-linkers such as glutaraldehyde (GA), 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide hydrochloride (EDAC), and D-fructose. The effects of the type and the amount of cross-linker on thermal and mechanical properties, stability, and cytotoxicity were investigated. The mechanical analysis data showed that an increase in the amount of GA in the sponge structures caused a slight increase in the modulus of elasticity but had almost no effect on the tensile strength. Increase in the EDAC concentration produced a maximum in the modulus of elasticity and tensile strength values. The stability of the sponges and the time required for complete degradation in aqueous media increased in parallel with the cross-linker content. In vitro studies carried out with fibroblast cells demonstrated a higher cell viability for the samples cross-linked with low concentrations of GA than for those cross-linked with EDAC.

Genipin-crosslinked gelatin microspheres as a drug carrier for intramuscular administration: in vitro and in vivo studies

Gelatin microspheres have been widely evaluated as a drug carrier. Nevertheless, gelatin dissolves rather rapidly in aqueous environments, making the use of the polymer difficult for the production of long-term delivery systems. This adverse aspect requires the use of a crosslinking agent in forming nonsoluble networks in microspheres. However, the use of crosslinking agents such as formaldehyde and glutaraldehyde can lead to toxic side effects owing to residual crosslinkers. In an attempt to overcome this problem, a naturally occurring crosslinking agent (genipin) was used to crosslink gelatin microspheres as a biodegradable drug-delivery system for intramuscular administration. Glutaraldehyde was used as a control. In the in vitro study, the morphology, dynamic swelling, and antienzymatic degradation of test microspheres were evaluated. In the in vivo study, the biocompatibility and degradability of test microspheres were implanted in the skeletal muscle of a rat model via intramuscular injection. The results obtained in the study suggested that crosslinking of gelatin microspheres with glutaraldehyde or genipin may produce distinct crosslinking structures. The water transport mechanism in both the glutaraldehyde- and genipin-crosslinked gelatin microspheres exhibit anomalous behavior ranging from Fickian to Case-II extremes. The increase of the swelling diameter for the genipin-crosslinked microspheres was significantly less than that observed for the glutaraldehyde-crosslinked microspheres. In the animal study, it was found that the degree in inflammatory reaction for tissues implanted with the genipin-crosslinked microspheres was significantly less than that implanted with the glutaraldehyde-crosslinked microspheres. Additionally, the degradation rate of the genipin-crosslinked microspheres was significantly slower than their glutaraldehyde-crosslinked counterparts. These results indicated that the genipin-crosslinked gelatin microspheres may be used as a long-acting drug carrier for intramuscular administration.

Gelatin microspheres and sponges for delivery of macromolecules

Gelatin microspheres and gelatin sponges were prepared by coacervation and freeze drying techniques, respectively. Both systems were crosslinked with glutaraldehyde. The mean diameter of the microspheres were in the range of 40-80 microm and the mean pore size of the sponges was 130-220 microm depending on the preparation conditions. Bovine serum albumin (BSA) was added into the preparation solutions and entrapped in the microspheres and sponges. BSA addition to sponges was also achieved by addition of BSA-containing microspheres into the sponges. The release kinetics of BSA from the prepared systems were examined. Studies demonstrated that release is dependent on the amount of BSA present in the system and crosslinking densities of microspheres. It was concluded that gelatin microspheres and gelatin sponges are promising carrier matrices for macromolecules.

Preparation and evaluation of once-a-day injectable microspheres of interferon alpha in rats

Gelatin microspheres (ms) and gelatin/BSA (bovine serum albumin) or gelatin/alginate ms were prepared by encapsulating fluorescein isothiocyanate (FITC) labeled dextran or interferon alpha (IFN-alpha). Ms were obtained by an emulsion-solvent-extraction method. Gelatin and gelatin/BSA ms were obtained by treating water-in-oil (W/O) emulsions with iso-propyl alcohol. Gelatin/alginate ms having different composition (25/1, 20/1, 15/1, 10/1 and 5/1) were obtained by treating a W/O emulsion composed of gelatin and sodium alginate with 0.5 M calcium chloride solution. The average diameters of all the prepared ms were approximately 300 microns. The FITC-dextran loading efficiencies were 96.5 +/- 0.6% for gelatin ms (#1), 97.3 +/- 2.2% for gelatin/BSA ms (#2) and 68.7 +/- 2.2%, 55.0 +/- 3.9%, 47.5 +/- 3.3%, 44.4 +/- 1.2%, 27.1 +/- 2.2% for gelatin/alginate ms (#3-#7). The IFN-alpha loading efficiencies were 10.8 +/- 0.5% for gelatin/BSA ms (#8) and 22.5 +/- 1.8%, 17.6 +/- 0.9% and 14.5 +/- 0.5% for gelatin/alginate ms (#9, #10 and #11). In vitro release studies with ms containing FITC-dextran showed that the release rate of FITC-dextran from the ms decreased by the modification of gelatin ms with BSA or sodium alginate, although the effect of BSA addition to gelatin ms did not elucidate satisfactory sustained-release characteristics of FITC-dextran after subcutaneous (s.c.) injection to rats. By decreasing the formulated ratio of gelatin/alginate from 25/1 to 5/1, the mean T50%, the time when the half amount of FITC-dextran contained was released from the ms, increased from 1.7 +/- 0.1 to 13.8 +/- 3.6 h and three ms preparations (#4, #5 and #6) showed sustained-release characteristics on the serum FITC-dextran concentration-time profiles. Based on these results, three types of ms containing IFN-alpha were prepared and in vivo pharmacokinetic studies were performed in rats, where the dose of IFN-alpha was 2 x 10(4) IU/rat. By the addition of alginate to gelatin, the release rate of IFN-alpha was decreased and the serum IFN-alpha concentration-time profiles showed better sustained-release characteristics of IFN-alpha from #10 ms than the other IFN-alpha ms (#8, #9 and #11) after s.c. injection to rats.