Simple Approaches to Minimally-Instrumented, Microfluidic-Based Point-of-Care Nucleic Acid Amplification Tests

An integrated microfluidic device for solid-phase extraction and spectrophotometric detection of opium alkaloids in urine samples

A novel lab-on-chip integrated microfluidic device for solid-phase extraction (SPE) and spectrophotometric detection of morphine (MOR), codeine (COD), and papaverine (PAP) was developed. The extracted analytes were analyzed with a miniature UV-Vis spectrophotometer. The SPE adsorptive phase composed of polyurethane/polyaniline (PU/PANI) nanofibers was fabricated by electrospinning and in situ oxidative polymerization techniques. The sorbent was characterized by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The main factors of extraction such as desorption conditions, pH, salt effect, and extraction time were investigated. The partial least square (PLS) regression was applied to improve the quantification of analytes. The linear dynamic ranges (LDRs) for MOR, COD, and PAP were 4-240, 4-210, and 1-150 ng mL^-1, respectively. Finally, the proposed method was successfully applied for the determination of MOR, COD, and PAP in human urine samples and the extraction recoveries were obtained in the range of 66.7-85.0% with RSDs < 8.3%.

Comparison of Loop-Mediated Isothermal Amplification and Real-Time PCR Assays for Detection of Strongyloides Larvae in Different Specimen Matrices

Strongyloides stercoralis can cause disease that ranges from asymptomatic chronic infection to fatal hyperinfection. Diagnosis from stool can be challenging because the most sensitive conventional tests require live larvae to be effective and there can be low larval output in chronic infection. Nucleic acid amplification tests (NAAT) have been developed to complement existing diagnostic methods. We compared a recently developed loop-mediated isothermal amplification (LAMP) assay with a real-time PCR that has previously been validated with larval microscopy. The limits of detection-quantified using serial dilutions of DNA extracts from single Strongyloides ratti third-stage (L3) larvae spiked into approximately 250 µl of 5 different S. stercoralis-negative stool specimens-were 10^-3 (1/5 replicates) and 10^-2 (1/5 replicates) dilutions for PCR and LAMP, respectively. PCR was positive for 4/5 replicates at 10^-2 LAMP was compared to PCR using extracts from 396 stool specimens collected in Bangladesh and Australia, of which 53 were positive and 343 were negative by PCR. The positive percentage agreement of LAMP was 77.3% (95% score confidence interval [CI], 64.5 to 86.6). The negative percentage agreement was 100% (95% CI, 98.9 to 100). In a preliminary investigation, PCR and LAMP assays were positive using DNA extracted from serum (PCR, 3/16 extracts; LAMP, 2/16 extracts) and bronchoalveolar lavage fluid (PCR and LAMP, 2/2 extracts), demonstrating proof of concept. Compared to PCR, the lower number of positive results using the LAMP assay may have been due to reaction inhibitors and DNA degradation, and strategies to improve the LAMP assay are discussed.

Point-of-Need DNA Testing for Detection of Foodborne Pathogenic Bacteria

Foodborne pathogenic bacteria present a crucial food safety issue. Conventional diagnostic methods are time-consuming and can be only performed on previously produced food. The advancing field of point-of-need diagnostic devices integrating molecular methods, biosensors, microfluidics, and nanomaterials offers new avenues for swift, low-cost detection of pathogens with high sensitivity and specificity. These analyses and screening of food items can be performed during all phases of production. This review presents major developments achieved in recent years in point-of-need diagnostics in land-based sector and sheds light on current challenges in achieving wider acceptance of portable devices in the food industry. Particular emphasis is placed on methods for testing nucleic acids, protocols for portable nucleic acid extraction and amplification, as well as on the means for low-cost detection and read-out signal amplification.

Advancement in POCT Molecular Testing: The Multiplex PCR POCT Devices for Infectious Diseases

Rapid and accurate diagnostic tests are very important for the global control of infectious diseases. The point of care diagnosis has become a promising strategy in recent years. Different kind of point of care testing devices has been introduced into the market in the last decade. These devices must provide a low-cost, robust, sensitive, specific, and practical analysis in order to replace the conventional clinical laboratory diagnostic test algorithms when needed. The successful implementation of point of care diagnostics has a potential to increase the strength of infectious diseases surveillance programs. Finally, the rapid progress in point of care diagnosis can stimulate a shift from a centralized diagnostic model to a decentralized patient-centered approach.

Multiplex sample-to-answer detection of bacteria using a pipette-actuated capillary array comb with integrated DNA extraction, isothermal amplification, and smartphone detection

A pipette-actuated capillary array comb (PAAC) system operated on a smartphone-based hand-held device has been successfully developed for the multiplex detection of bacteria in a "sample-to-answer" manner. The PAAC consists of eight open capillaries inserted into a cylindrical plastic base with a piece of chitosan-modified glass filter paper embedded in each capillary. During the sample preparation, a PAAC was mounted into a 1 mL pipette tip with an enlarged opening and was operated with a 1 mL pipette for liquid handling. The cell lysate was drawn and expelled through the capillaries three times to facilitate the DNA capture on the embedded filter discs. Following washes with water, the loop-mediated isothermal amplification (LAMP) reagents were aspirated into the capillaries, in which the primers were pre-fixed with chitosan. After that, the PAAC was loaded into the smartphone-based device for a one-hour amplification at 65 °C and end-point detection of calcein fluorescence in the capillaries. The DNA capture efficiency of a 1.1 mm-diameter filter disc was determined to be 97% of λ-DNA and the coefficient of variation among the eight capillaries in the PAAC was only 2.2%. The multiplex detection of genomic DNA extracted from Escherichia coli, Klebsiella pneumoniae, and Staphylococcus aureus provided limits of detection of 200, 500, and 500 copies, respectively, without any cross-contamination and cross reactions. "Sample-to-answer" detection of E. coli samples was successfully completed in 85 minutes, demonstrating a sensitivity of 200 cfu per capillary. The multiplex "sample-to-answer" detection, the streamlined operation, and the compact device should facilitate a broad range of applications of our PAAC system in point-of-care testing.

Rapid and visual detection of Group B streptococcus using recombinase polymerase amplification combined with lateral flow strips

Conventional culture method for detecting Group B streptococcus (GBS), a common pathogen of neonatal meningitis and sepsis, is time-consuming and unsensitive. Even though real-time fluorescence PCR-based molecular method is more accurate, it need special instrument and elaborate protocol. Here, we established a novel molecular method combining recombinase polymerase amplification with lateral flow strips for detecting GBS. The cAMP factor (cfb) gene is a highly specific and sensitive biomarker to identify GBS and is detectable by using 100 genomic copies as the amplification template. Clinical performance of this assay was evaluated by testing 130 samples, in comparison with culture method and real-time fluorescence PCR, and the results achieved 100% accuracy, which were the same with those of real-time fluorescence PCR, and were better than those of culture method with false-negative detection. This study provides a rapid and visual method, with clinical potential, for the detection of GBS infection of patients.