New Directions in Metal Phosphonate and Phosphinate Chemistry

NH3/H2O-mediated proton conductivity and photocatalytic behaviour of Fe(ii)-hydroxyphosphonoacetate and M(ii)-substituted derivatives

Multifunctional Fe(ii)-hydroxyphosphonoacetate and M(ii)-substituted derivatives exhibit ammonia-tunable proton conductivity and photo-Fenton catalytic properties.

Metal phosphonates incorporating metalloligands: assembly, structures and properties

This feature article summarizes the current status of metal–metalloligand phosphonates including the synthetic strategies, crystal structures and properties. Future challenges in this field are discussed.

Synthesis and characterization of two bifunctional pyrazole-phosphonic acid ligands

The bifunctional compounds 3,5-dimethyl-4-(4-phosphonophenyl)-1H-pyrazole 1 and 4-(4-phosphonophenyl)-1H-pyrazole 2 were synthesized via Suzuki-Miyaura coupling, starting from a Boc-protected pyrazolylboronic acid ester and the iodoarylphosphonate. The target compounds were isolated after acidic hydrolysis in the form of the hydrochloride salts 1 · HCl and 2 · HCl · H2O with a yield of 81% and 86%, respectively. Pd(dppf)Cl2 was found to be superior to Pd(PPh3)4 as a catalyst; dry 1,4-dioxane as a solvent, Cs2CO3 as a base, and no co-ligands were the best found conditions. The alternative routes through iodoarylphosphonate of iodoarylpyrazole, with the crucial steps based on the copper-catalyzed coupling with acetylacetone or the Arbuzov reaction were proven inefficient. The structures of the isolated hydrochloride salts 1 · HCl and 2 · HCl · H2O feature hydrogen-bonded networks involving the chloride anions.

Changes in magnetic order through two consecutive dehydration steps of metal-phosphonate diamond chains

Hydrothermal reactions of the multitopic ligand 1-hydroxy-1-(piperidin-4-yl)methylidenebisphosphonic acid (hpdpH₄) with cobalt or nickel sulfates afforded two new isostructural metal phosphonates, M₃^II(hpdpH)₂(H₂O)₆·4H₂O [M = Co (Co-10H₂O), Ni (Ni-10H₂O)]. Their structures consist of parallel diamond chains of three MO₆ octahedra bridged by the PO₃C tetrahedra. Six of the seven oxygen atoms of the ligand are involved in coordination; for two ligands that amounts to 12 bonds for 3 MO₆ and the remaining six are occupied by terminal water molecules. In addition, four water molecules sit in between the chains providing H-bonds to the formation of a 3D-net. Thermal analyses show identical two-step dehydration processes involving first the departure of six water molecules followed by the remaining four. A detailed study of the ac- and dc-magnetization as a function of temperature, field and frequency reveals associated drastic changes. The virgin form Co-10H₂O is a paramagnet while its partial dehydrated form Co-4H₂O is an antiferromagnet displaying canting below T_N = 4.7 K and the fully dehydrated form Co is a ferrimagnet (T_C = 12 K). Ni-10H₂O and Ni-4H₂O exhibit long-range ordered antiferromagnetism (T_N = 2.7 and 4.0 K, respectively) and also become ferrimagnets (T_C = 9.4 K) when fully dehydrated to Ni. The dehydrated samples can be fully rehydrated with the complete recovery of both the structures and magnetic properties.

M₃^II(hpdpH)₂(H₂O)₆·4H₂O (M = Co, Ni) experience identical two-step dehydration processes associated with drastic magnetic changes from paramagnet to antiferromagnet/metamagnetic to ferrimagnet for M = Co, and from antiferromagnet to antiferromagnet to ferrimagnet for M = Ni.

Zirconium Carboxyaminophosphonate Nanosheets as Support for Ag Nanoparticles

A layered insoluble inorganic-organic solid, namely zirconium phosphate glycine-N,N-bismethylphosphonate, was used to prepare dispersions of nanosheets to support active metals such as metallic silver nanoparticles and zinc ions. Zr phosphate-phosphonate microcrystals were first exfoliated with methylamine to produce a stable colloidal dispersion and then the methylamine was removed by treatment with hydrochloric acid. The obtained colloidal dispersion of Zr phosphate-phosphonate nanosheets was used to immobilize silver or zinc cations, via ion exchange, with the acidic protons of the sheets. The layered matrix showed a great affinity for the metal cations up taking all the added cations. The treatment of the dispersions containing silver ions with ethanol yielded metal silver nanoparticles grafted on the surface of the layered host. The samples were characterized by X-ray powder diffraction, elemental analysis transmission electron microscopy, and selected samples were submitted to antimicrobial tests. The nanocomposites based on Ag nanoparticles showed good bactericidal properties against the bacterial reference strain Staphylococcus epidermidis (S. epidermidis).

Antibacterial Properties of a Novel Zirconium Phosphate-Glycinediphosphonate Loaded with Either Zinc or Silver

A novel compound consisting of a zirconium phosphate-glycinediphosphonate (ZPGly) has recently been introduced. This 2D-structured material forming nanosheets was exfoliated under appropriate conditions, producing colloidal aqueous dispersions (ZPGly-e) which were then loaded with zinc (Zn/ZPGly) or silver ions. Silver ions were subsequently reduced to produce metallic silver nanoparticles on exfoliated ZPGly nanosheets (Ag@ZPGly). In the search for new anti-infective materials, the present study investigated the properties of colloidal dispersions of ZPGly-e, Zn/ZPGly, and Ag@ZPGly. Ag@ZPGly was found to be a bactericidal material and was assayed to define its minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) on the five most prevalent pathogens of orthopaedic implant infections, namely: Staphylococcus aureus ATCC25923, Staphylococcus epidermidis RP62A, Enterococcus faecalis ATCC29212, Escherichia coli ATCC51739, and Pseudomonas aeruginosa ATCC27853. MIC and MBC were in the range of 125–250 μg/mL and 125–1000 μg/mL, respectively, with E. coli being the most sensitive species. Even colloidal suspensions of exfoliated ZPGly nanosheets and Zn/ZPGly exhibited some intrinsic antibacterial properties, but only at greater concentrations. Unexpectedly, Zn/ZPGly was less active than ZPGly-e.

Reticular Chemistry of Uranyl Phosphonates: Sterically Hindered Phosphonate Ligand Method is Significant for Constructing Zero-Dimensional Secondary Building Units

Designability is an attractive feature for metal-organic frameworks (MOFs) and essential for reticular chemistry, and many ideas are significantly useful in the carboxylate system. Bi-, tri-, and tetra-topic phosphonate ligands are used to achieve framework structures. However, an efficient method for designing phosphonate MOFs is still on the way, especially for uranyl phosphonates, owing to the complicated coordination modes of the phosphonate group. Uranyl phosphonates prefer layer or pillar-layered structures as the topology extension for uranyl units occurs in the plane perpendicular to the linear uranium-oxo bonds and phosphonate ligands favor the formation of compact structures. Therefore, an approach that can construct three-dimensional (3D) uranyl phosphonate MOFs is desired. In this paper, a sterically hindered phosphonate ligand method (SHPL) is described and is successfully used to achieve 3D framework structures of uranyl phosphonates. Four MOF compounds ([AMIM]₂ (UO₂ )(TppmH₄ )⋅H₂ O (UPF-101), [BMMIM]₂ (UO₂ )₃ (TppmH₄ )₂ ⋅H₂ O (UPF-102), [Py14]₂ (UO₂ )₃ (TppmH₄ )₂ ⋅3 H₂ O (UPF-103), and [BMIM](UO₂ )₃ (TppmH₃ )F₂ ⋅2 H₂ O (UPF-104); [AMIM]=1-allyl-3-methylimidazolium, [BMMIM]=1-butyl-2,3-dimethylimidazolium, [Py14]=N-butyl-N-methylpyrrolidinium, and [BMIM]=1-butyl-3-methylimidazolium) are obtained by ionothermal synthesis, with zero-dimensional nodes of uranyl phosphonates linked by steric tetra-topic ligands, namely tetrakis[4-(dihyroxyphosphoryl)phenyl]methane (TppmH₈ ), to give 3D framework structures. Characterization by PXRD, UV/Vis, IR, Raman spectroscopy, and thermogravimetry (TG) were also performed.

Metal Phosphonates and Phosphinates

The present Special Issue entitled “Metal phosphonates and phosphinates” aims to collect recent and significant research papers on the fascinating chemistry of these two related families of coordination compounds [...]

Novel Cerium Bisphosphinate Coordination Polymer and Unconventional Metal–Organic Framework

The first Ce(III)-based coordination polymer ICR-9 (ICR stands for Inorganic Chemistry Řež), with the formula Ce2(C8H10P2O4)3, containing ditopic phenylene-1,4-bis(methylphosphinic acid) linker, was synthetized under solvothermal conditions. The crystal structure, solved using electron diffraction tomography (EDT), revealed 2D layers of octahedrally coordinated cerium atoms attached together through O-P-O bridges. The structure is nonporous, however, the modification of synthetic conditions led to unconventional metal–organic framework (or defective amorphous phase) with a specific surface area up to approximately 400 m2 g-1.

Platonic Relationships in Metal Phosphonate Chemistry: Ionic Metal Phosphonates

Phosphonate ligands demonstrate strong affinity for metal ions. However, there are several cases where the phosphonate is found non-coordinated to the metal ion. Such compounds could be characterized as salts, since the interactions involved are ionic and hydrogen bonding. In this paper we explore a number of such examples, using divalent metal ions (Mg2+, Ca2+, Sr2+ and Ni2+) and the phosphonic acids: p-aminobenzylphosphonic acid (H2PABPA), tetramethylenediamine-tetrakis(methylenephosphonic acid) (H8TDTMP), and 1,2-ethylenediphosphonic acid (H4EDPA). The compounds isolated and structurally characterized are [Mg(H2O)6]·[HPABPA]2·6H2O, [Ca(H2O)8]·[HPABPA]2, [Sr(H2O)8]·[HPABPA]2, [Mg(H2O)6]·[H6TDTMP], and [Ni(H2O)6]·[H2EDPA]·H2O. Also, the coordination polymer {[Ni(4,4’-bpy)(H2O)4]·[H2EDPA]·H2O}n was synthesized and characterized, which contains a bridging 4,4’-bipyridine (4,4’-bpy) ligand forming an infinite chain with the Ni2+ cations. All these compounds contain the phosphonate anion as the counterion to charge balance the cationic charge originating from the metal cation.