Conversion of Chitin to Defined Chitosan Oligomers: Current Status and Future Prospects

Chitin Deacetylation Using Deep Eutectic Solvents: Ab Initio-Supported Process Optimization

Chitin is the most abundant marine biopolymer, being recovered during the shell biorefining of crustacean shell waste. In its native form, chitin displays a poor reactivity and solubility in most solvents due to its extensive hydrogen bonding. This can be overcome by deacetylation. However, this process requires a high concentration of acids or bases at high temperatures, forming large amounts of toxic waste. Herein, we report on the first deacetylation with deep eutectic solvents (DESs) as an environmentally friendly alternative, requiring only mild reaction conditions. Biocompatible DESs are efficient in disturbing the native hydrogen-bonding network of chitin, readily dissolving it. First, quantum chemical calculations have been performed to evaluate the feasibility of different DESs to perform chitin deacetylation by studying their mechanism. Comparing these with the calculated barriers for garden-variety alkaline/acidic hydrolysis, which are known to proceed, prospective DESs were identified with barriers around 25 kcal·mol^-1 or lower. Based on density functional theory results, an experimental screening of 10 distinct DESs for chitin deacetylation followed. The most promising DESs were identified as K₂CO₃:glycerol (K₂CO₃:G), choline chloride:acetic acid ([Ch]Cl:AA), and choline chloride:malic acid ([Ch]Cl:MA) and were subjected to further optimization with respect to the water content, process duration, and temperature. Ultimately, [Ch]Cl:MA showed the best results, yielding a degree of deacetylation (DDA) of 40% after 24 h of reaction at 120 °C, which falls slightly behind the threshold value (50%) for chitin to be considered chitosan. Further quantum chemical calculations were performed to elucidate the mechanism. Upon the removal of 40% N-acetyl groups from the chitin structure, its reactivity was considerably improved.

Ligand decorated biodegradable nanomedicine in the treatment of cancer

Cancer is one of the major global health problems, responsible for the second-highest number of deaths. The genetic and epigenetic changes in the oncogenes or tumor suppressor genes alter the regulatory pathways leading to its onset and progression. Conventional methods are used in appropriate combinations for the treatment. Surgery effectively treats localized tumors; however, it fails to treat metastatic tumors, leading to a spread in other organs, causing a high recurrence rate and death. Among the different strategies, the nanocarriers-based approach is highly sought for, but its nonspecific delivery can cause a profound side effect on healthy cells. Targeted nanomedicine has the advantage of targeting cancer cells specifically by interacting with the receptors overexpressed on their surface, overcoming its non-specificity to target healthy cells. Nanocarriers prepared from biodegradable and biocompatible materials are decorated with different ligands by encapsulating therapeutic or diagnostic agents or both to target cancer cells overexpressing the receptors. Scientists are now utilizing a theranostic approach to simultaneously evaluate nanocarrier bio-distribution and its effect on the treatment regime. Herein, we have summarized the recent 5-year efforts in the development of the ligands decorated biodegradable nanocarriers, as a targeted nanomedicine approach, which has been highly promising in the treatment of cancer.

Screening and Identification of Sponge-Associated Chitinolytic Bacteria by Forming Chitosan from Manado Bay, Indonesia

BACKGROUND AND OBJECTIVE

Chitosan can be produced through the enzymatic process catalyzed by chitin deacetylase which can be produced by bacteria. The biotransformation of chitin to chitosan by bacteria is interesting because the process is economical and environmentally friendly. This study described the potential of sponge-associated bacterium capability in degrading chitin and forming chitosan.

MATERIALS AND METHODS

The bacteria were isolated from sponge Cribrochalina sp. at Manado Bay, Indonesia. In the screening of the chitinase activity of bacteria, chitin media was used. Meanwhile, the transformation of chitin to chitosan was tested by using Chitinase Degrading Activity media. Molecular identification of bacteria was based on 16S rRNA gene sequences.

RESULTS

The results showed that the SS1, SS2, SS3, SS4 and SS5 bacterial isolates could degrade chitin based on chitinolytic indexes. These five bacteria could also form chitosan exhibited through the presence of chitosan in the form of precipitation in the fermented broth of bacteria. SS1 had the highest chitinase activity based on the chitinolytic index identified as Bacillus subtilis (100% identity), hence it is called B. subtilis strain SS1. The partial rRNA gene sequences data were deposited at GenBank under accession number MN999892.

CONCLUSION

The bacteria strain isolated from Cribrochalina sp. can be utilized in degrading chitin and form chitosan which could be a promising candidate for an economical and eco-friendly process of chitosan.

Anti-inflammatory activity of soluble chito-oligosaccharides (CHOS) on VitD3-induced human THP-1 monocytes

Chito-oligosaccharides (CHOS) are oligomers of D-glucosamine and N-acetyl-glucosamine. Anti-inflammatory activities of a wide variety of CHOS mixtures have previously been reported, mainly based on studies with mouse models and murine macrophages. Since the mouse and human immune systems are quite different, gaining insight into the activity of CHOS on human cell lines, using well-characterized CHOS mixtures, is of considerable interest. Bacillus subtilis chitosanase (BsCsn46A) can efficiently convert chitosan to mixtures of water soluble low molecular weight CHOS. Here, the anti-inflammatory activity of a properly characterized CHOS mixture was studied, using human THP-1 cells that were differentiated to mature monocytes using vitamin D3. Addition of CHOS reduced the production of multiple pro-inflammatory cytokines associated with bacterial lipopolyssacharide (LPS)-stimulated inflammation, in a dose-dependent manner and without affecting cell viability. Interestingly, only minimal effects of CHOS were observed in similar experiments with phorbol 12-myristate 13-acetate- (PMA-) differentiated, macrophage-like, THP-1 cells. Altogether, in addition to showing promising biological effects of well-characterized low molecular weight soluble CHOS in a human system, the present study also points at Vitamin D3-stimulated THP-1 cells as a favorable system for assessing the anti-inflammatory activity of bioactive compounds.

Biocompatibility analysis of high molecular weight chitosan obtained from Pleoticus muelleri shrimps. Evaluation in prokaryotic and eukaryotic cells

The search for the exploitation and recycling of biomaterials is increasing for reducing the use of non-renewable resources and minimizing environmental pollution caused by synthetic materials. In this context, Chitosan (CS) being a naturally occurring biopolymer becomes relevant. The aim of the present work was to explore the effects of High Molecular Weight CS (H-CS) from Argentinean shrimp's wastes in prokaryotic and eukaryotic in vitro cell cultures. Ultrastructure of H-CS was analysed by SEM and TEM. In vitro studies were performed in prokaryotic (Lactobacillus casei BL23) and eukaryotic (Caco-2, ARPE-19, EA.hy926 and 3T3-L1) culture cells. High performance microscopic techniques were applied to examine culture cells. No changes in morphology were found in any of the cell types. In addition, fluorescent-dyed H-CS revealed that eukaryotic cells could internalize it optimally. Viability was maintained and proliferation rate even increased for Caco-2, ARPE-19 and 3T3-L1 cells under H-CS treatment. Besides, viability was neither altered in L. casei nor in EA.hy926 cells after H-CS exposure. In conclusion, H-CS could be a suitable biopolymer to be exploited for biomedical or food industry applications.

Carbohydrate de-N-acetylases acting on structural polysaccharides and glycoconjugates

Deacetylation of N-acetylhexosamine residues in structural polysaccharides and glycoconjugates is catalyzed by different families of carbohydrate esterases that, despite different structural folds, share a common metal-assisted acid/base mechanism with the metal cation coordinated with a conserved Asp-His-His triad. These enzymes serve diverse biological functions in the modification of cell-surface polysaccharides in bacteria and fungi as well as in the metabolism of hexosamines in the biosynthesis of cellular glycoconjugates. Focusing on carbohydrate de-N-acetylases, this article summarizes the background of the different families from a structural and functional viewpoint and covers advances in the characterization of novel enzymes over the last 2-3 years. Current research is addressed to the identification of new deacetylases and unravel their biological functions as they are candidate targets for the design of antimicrobials against pathogenic bacteria and fungi. Likewise, some families are also used as biocatalysts for the production of defined glycostructures with diverse applications.

Recognition Pattern, Functional Mechanism and Application of Chitin and Chitosan Oligosaccharides in Sustainable Agriculture

Background:

Application of chitin attracts much attention in the past decades as the second abundant polysaccharides in the world after cellulose. Chitin oligosaccharides (CTOS) and its deacetylated derivative chitosan oligosaccharides (COS) were shown great potentiality in agriculture by enhancing plant resistance to abiotic or biotic stresses, promoting plant growth and yield, improving fruits quality and storage, etc. Those applications have already served huge economic and social benefits for many years. However, the recognition mode and functional mechanism of CTOS and COS on plants have gradually revealed just in recent years.

Objective:

Recognition pattern and functional mechanism of CTOS and COS in plant together with application status of COS in agricultural production will be well described in this review. By which we wish to promote further development and application of CTOS and COS–related products in the field.

Chitin and its derivatives: Structural properties and biomedical applications

Chitin, a polysaccharide that occurs abundantly in nature after cellulose, has attracted the interest of the scientific community due to its plenty of availability and low cost. Mostly, it is derived from the exoskeleton of insects and marine crustaceans. Often, it is insoluble in common solvents that limit its applications but its deacetylated product, named chitosan is found to be soluble in protonated aqueous medium and used widely in various biomedical fields. Indeed, the existence of the primary amino group on the backbone of chitosan provides it an important feature to modify it chemically into other derivatives easily. In the present review, we present the structural properties of chitin, and its derivatives and highlighted their biomedical implications including, tissue engineering, drug delivery, diagnosis, molecular imaging, antimicrobial activity, and wound healing. We further discussed the limitations and prospects of this versatile natural polysaccharide.

2,5-Anhydro-d-Mannose End-Functionalized Chitin Oligomers Activated by Dioxyamines or Dihydrazides as Precursors of Diblock Oligosaccharides

Diblock oligosaccharides based on renewable resources allow for a range of new but, so far, little explored biomaterials. Coupling of blocks through their reducing ends ensures retention of many of their intrinsic properties that otherwise are perturbed in classical lateral modifications. Chitin is an abundant, biodegradable, bioactive, and self-assembling polysaccharide. However, most coupling protocols relevant for chitin blocks have shortcomings. Here we exploit the highly reactive 2,5-anhydro-d-mannose residue at the reducing end of chitin oligomers obtained by nitrous acid depolymerization. Subsequent activation by dihydrazides or dioxyamines provides precursors for chitin-based diblock oligosaccharides. These reactions are much faster than for other carbohydrates, and only acyclic imines (hydrazones or oximes) are formed (no cyclic N-glycosides). α-Picoline borane and cyanoborohydride are effective reductants of imines, but in contrast to most other carbohydrates, they are not selective for the imines in the present case. This could be circumvented by a simple two-step procedure. Attachment of a second block to hydrazide- or aminooxy-functionalized chitin oligomers turned out to be even faster than the attachment of the first block. The study provides simple protocols for the preparation of chitin-b-chitin and chitin-b-dextran diblock oligosaccharides without involving protection/deprotection strategies.

Seafood Waste as Attractive Source of Chitin and Chitosan Production and Their Applications

Chitosan is a cationic polymer obtained by deacetylation of chitin, found abundantly in crustacean, insect, arthropod exoskeletons, and molluscs. The process of obtaining chitin by the chemical extraction method comprises the steps of deproteinization, demineralization, and discoloration. To obtain chitosan, the deacetylation of chitin is necessary. These polymers can also be extracted through the biological extraction method involving the use of microorganisms. Chitosan has biodegradable and biocompatible properties, being applied in the pharmaceutical, cosmetic, food, biomedical, chemical, and textile industries. Chitosan and its derivatives may be used in the form of gels, beads, membranes, films, and sponges, depending on their application. Polymer blending can also be performed to improve the mechanical properties of the bioproduct. This review aims to provide the latest information on existing methods for chitin and chitosan recovery from marine waste as well as their applications.

Chitinolytic proteins secreted by Cellulosimicrobium sp. NTK2

Cellulosimicrobium sp. NTK2 (NTK2 strain) was isolated as a chitinolytic bacterium from mature compost derived from chitinous waste. The growth of the NTK2 strain was enhanced by supplementation of the culture medium with 2% crystalline chitin. Approximately 70% of the supplemented crystalline chitin was degraded during cultivation. Whole genome analysis of the NTK2 strain identified eight chitinases and two chitin-binding proteins. The NTK2 strain secreted two bacterial extracellular solute-binding proteins, three family 18 glycosyl hydrolases and one lytic polysaccharide monooxygenase specifically in the presence of crystalline chitin. A chitinolytic enzyme with a molecular mass of 29 kDa on SDS-PAGE under native conditions was also secreted. This chitinolytic enzyme exhibited the largest band upon zymography but could not be identified. In an attempt to identify all the chitinases secreted by the NTK2 strain, we expressed recombinant versions of the proteins exhibiting chitinolytic activity in Escherichia coli. Our results suggest that the 29 kDa protein belonging to family 19 glycosyl hydrolase was expressed specifically in the presence of 2% crystalline chitin.

Isolation, characterisation, and genome sequencing of Rhodococcus equi: a novel strain producing chitin deacetylase

Chitin deacetylase (CDA) can hydrolyse the acetamido group of chitin polymers to produce chitosans, which are used in various fields including the biomedical and pharmaceutical industries, food production, agriculture, and water treatment. CDA represents a more environmentally-friendly and easier to control alternative to the chemical methods currently utilised to produce chitosans from chitin; however, the majority of identified CDAs display activity toward low-molecular-weight oligomers and are essentially inactive toward polymeric chitin or chitosans. Therefore, it is important to identify novel CDAs with activity toward polymeric chitin and chitosans. In this study, we isolated the bacterium Rhodococcus equi F6 from a soil sample and showed that it expresses a novel CDA (ReCDA), whose activity toward 4-nitroacetanilide reached 19.20 U/mL/h during fermentation and was able to deacetylate polymeric chitin, colloidal chitin, glycol-chitin, and chitosan. Whole genome sequencing revealed that ReCDA is unique to the R. equi F6 genome, while phylogenetic analysis indicated that ReCDA is evolutionarily distant from other CDAs. In conclusion, ReCDA isolated from the R. equi F6 strain expands the known repertoire of CDAs and could be used to deacetylate polymeric chitosans and chitin in industrial applications.

A Cold-Adapted Chitinase-Producing Bacterium from Antarctica and Its Potential in Biocontrol of Plant Pathogenic Fungi

To obtain chitinase-producing microorganisms with high chitinolytic activity at low temperature, samples collected from Fildes Peninsula in Antarctica were used as sources for bioprospecting of chitinolytic microorganisms. A cold-adapted strain, designated as GWSMS-1, was isolated from marine sediment and further characterized as Pseudomonas. To improve the chitinase production, one-factor-at-a-time and orthogonal test approaches were adopted to optimize the medium components and culture conditions. The results showed that the highest chitinolytic activity (6.36 times higher than that before optimization) was obtained with 95.41 U L^-1 with 15 g L^-1 of glucose, 1 g L^-1 of peptone, 15 g L^-1 of colloid chitin and 0.25 g L^-1 of magnesium ions contained in the medium, cultivated under pH 7.0 and a temperature of 20 °C. To better understand the application potential of this strain, the enzymatic properties and the antifungal activity of the crude chitinase secreted by the strain were further investigated. The crude enzyme showed the maximum catalytic activity at 35 °C and pH 4.5, and it also exhibited excellent low-temperature activity, which still displayed more than 50% of its maximal activity at 0 °C. Furthermore, the crude chitinase showed significant inhibition of fungi Verticillium dahlia CICC 2534 and Fusarium oxysporum f. sp. cucumerinum CICC 2532, which can cause cotton wilt and cucumber blight, respectively, suggesting that strain GWSMS-1 could be a competitive candidate for biological control in agriculture, especially at low temperature.