N–TiO2 Photocatalysts: A Review of Their Characteristics and Capacity for Emerging Contaminants Removal

Perspectives on plasma-assisted synthesis of N-doped nanoparticles as nanopesticides for pest control in crops

Green plasma-based technology production of N-doped NPs for a new agri-tech revolution in pest control.

TiO2 nanotube arrays-based reactor for photocatalytic oxidation of parabens mixtures in ultrapure water: Effects of photocatalyst properties, operational parameters and light source

Self-organized TiO₂ nanotubes as immobilized photocatalysts were evaluated in detail for the photocatalytic degradation of parabens mixtures from ultrapure water. This kind of approach can be a very suitable option for emerging contaminants degradation considering the possibility of the catalyst reuse and recovery which will be simpler than when catalytic powders are used. The anodization method was applied for the TiO₂ nanotubes production under different preparation voltages (20, 30 and 40 V). These preparation conditions are important on the morphological characteristics of nanotubes such as length, as well as internal and external diameters. The photocatalytic efficiency was dependent on the materials preparation voltages. The photocatalytic oxidation was evaluated using two different irradiation sources, namely UVA and sunlight. These irradiation sources were evaluated for parabens mixture degradation using different number of catalytic plates. The increase of the number of plates improved the parabens degradation possibly due to the availability of more active sites which can be relevant for the hydroxyl radical's generation. The effect of the reactor design was also evaluated using sunlight irradiation. The configuration, position and solar concentrators can be important for the performance of degradation. The mechanism of degradation was analysed through by-products formation under sunlight irradiation. The main responsible for parabens degradation was hydroxyl radical. Decarboxylation, dealkylation and hydroxylation seem to be the most important reactional steps for the mixture decontamination.

TiO2/SiO2 decorated carbon nanostructured materials as a multifunctional platform for emerging pollutants removal

Aquatic ecosystem contaminated with hazardous pollutants has become a high priority global concern leading to serious economic and environmental damage. Among various treatment approaches, carbon nanostructured materials have received particular interest as a novel platform for emerging pollutants removal owing to their unique chemical and electrical properties, biocompatibility, high scalability, and infinite functionalization possibility with an array of inorganic nanomaterials and bio-molecules. Within this framework, carbon nanotubes (CNTs) are widely used due to their hollow and layered structure and availability of large specific surface area for the incoming contaminants. Carbon nanotubes can be used either as single-walled, multi-walled, or functionalized nanoconstructs. TiO₂/SiO₂-functionalized CNTs are among the most promising heterogeneous photocatalytic candidates for the degradation of a range of organic compounds, heavy metals reduction, and selective oxidative reactions. Herein, we reviewed recent development in the application of TiO₂ and SiO₂ functionalized nanostructured carbon materials as potential environmental candidates. After a brief overview of synthesis and properties of CNTs, we explicitly discussed the potential applications of TiO₂/SiO₂ functionalized CNTs for the remediation of a variety of environmentally-related pollutants of high concern, including synthetic dyes or dye-based hazardous waste effluents, as polycyclic aromatic hydrocarbons (PAHs), pharmaceutically active compounds, pesticides, toxic heavy elements, remediation of metal-contaminated soil, and miscellaneous organic contaminants. The work is wrapped up by giving information on current challenges and recommended guidelines about future research in the field bearing in mind the conclusions of the current review.

The Role of Fluorine in F-La/TiO2 Photocatalysts on Photocatalytic Decomposition of Methanol-Water Solution

F-La/TiO₂ photocatalysts were studied in photocatalytic decomposition water-methanol solution. The structural, textural, optical, and electronic properties of F-La/TiO₂ photocatalysts were studied by combination of X-ray powder diffraction (XRD), nitrogen physisorption, Ultraviolet–visible diffuse reflectance spectroscopy (UV-Vis DRS), Electrochemical impedance spectroscopy (EIS), and X-ray fluorescence (XPS). The production of hydrogen in the presence of 2.8F-La/TiO₂ was nearly up to 3 times higher than in the presence of pure TiO₂. The photocatalytic performance of F-La/TiO₂ increased with increasing photocurrent response and conductivity originating from the higher amount of fluorine presented in the lattice of TiO₂.

Pathways to Tailor Photocatalytic Performance of TiO2 Thin Films Deposited by Reactive Magnetron Sputtering

TiO₂ thin films are used extensively for a broad range of applications including environmental remediation, self-cleaning technologies (windows, building exteriors, and textiles), water splitting, antibacterial, and biomedical surfaces. While a broad range of methods such as wet-chemical synthesis techniques, chemical vapor deposition (CVD), and physical vapor deposition (PVD) have been developed for preparation of TiO₂ thin films, PVD techniques allow a good control of the homogeneity and thickness as well as provide a good film adhesion. On the other hand, the choice of the PVD technique enormously influences the photocatalytic performance of the TiO₂ layer to be deposited. Three important parameters play an important role on the photocatalytic performance of TiO₂ thin films: first, the different pathways in crystallization (nucleation and growth); second, anatase/rutile formation; and third, surface area at the interface to the reactants. This study aims to provide a review regarding some strategies developed by our research group in recent years to improve the photocatalytic performance of TiO₂ thin films. An innovative approach, which uses thermally induced nanocrack networks as an effective tool to enhance the photocatalytic performance of sputter deposited TiO₂ thin films, is presented. Plasmonic and non-plasmonic enhancement of photocatalytic performance by decorating TiO₂ thin films with metallic nanostructures are also briefly discussed by case studies. In addition to remediation applications, a new approach, which utilizes highly active photocatalytic TiO₂ thin film for micro- and nanostructuring, is also presented.

Titanium Oxide Microspheres with Tunable Size and Phase Composition

Due to their unique physical and chemical properties, monodisperse titanium oxide microspheres can be used in dye-sensitized solar cells, as cosmetic pigments, and for other applications. However, the synthesis of microspheres with narrow size distribution, desired phase composition, and porosity is still a challenge. In this work, spherical titania particles with controllable size, crystallinity, and pore size were obtained by Ti(OⁿBu)₄ hydrolysis in ethanol. The influence of NaOH addition on the particles’ size and morphology was investigated for the first time. Particle diameter can be tailored from 300 nm to 1.5 μm by changing water and NaOH concentrations. Particle size was analyzed by the statistical processing of scanning electron microscopy (SEM) images and differential centrifugal sedimentation (DCS) measurements. Optical properties of the microspheres were studied by diffuse reflectance UV-Vis spectroscopy. Thermal and hydrothermal treatment allowed transforming amorphous phase in as-prepared particles into nanocrystalline anatase and/or rutile. Transmission electron microscopy (TEM) study of the lamellae, cut out from spherical particles using focused ion beam (FIB), revealed that as-synthesized microspheres are non-hollow, homogeneous, and crystallize throughout the whole volume of the particle. The spherical particles possess photoprotective properties; the highest sun protection factor (SPF) was observed for amorphous microspheres.

Effect of Different Radiation Sources and Noble Metal Doped onto TiO2 for Contaminants of Emerging Concern Removal

Water scarcity is a worldwide problem boosted by global warming and pollution of anthropogenic origin. The contaminants of emerging concern in water sources are increasing due to the inefficiency of conventional wastewater treatments, and these should be mitigated. Advanced oxidation processes appear as suitable solutions for decontamination. The photocatalytic oxidation of the mixture of sulfamethoxazole, carbamazepine and lorazepam was investigated. TiO2 modified by Ag and TiO2 modified by Pd were used as photocatalysts to improve photoactivity. The impact of light wavelengths was examined using UVA and visible radiation as well as natural sunlight. Visible light revealed the lowest ability for decontamination in 60 min of irradiation through Ag and Pd–TiO2 photocatalytic oxidation. On the other hand, UVA and sunlight in the presence of photocatalysts were able to totally remove the contaminants. This can be related to the high production of reactive oxidative species at those conditions. The increase of the noble metal load promotes the improvement of the decontamination efficiency. The kinetic rate was analyzed for UVA and sunlight radiation for different photocatalytic conditions. The presence of a natural light source without energy costs leads to an increase in the pseudo-first-order kinetic constant. Sunlight radiation with a suitable photocatalyst can be a very good option for water decontamination.