Cyclodextrin-based nanosponges as drug carriers

Formulation Development, In Vitro and In Vivo Evaluation of Topical Hydrogel Formulation of Econazole Nitrate-Loaded β-Cyclodextrin Nanosponges

Econazole nitrate, an antifungal drug used in the handling of skin ailments, is commercially not efficient as these ailments typically require a more elevated concentration of the drug to offer an effective pharmacological retort. Like so, it is proposed to assess the effectiveness of the topical hydrogel of econazole-loaded nanosponge in the management of skin ailment(s). Econazole nitrate-laden β-cyclodextrin nanosponges were developed by employing the melt method using β-cyclodextrin as the organic polymer and N,N-carbonyldiimidazole as the crosslinker. The critical factors disturbing the quality of the formulation were uniquely identified by the Ishikawa diagram, and they were optimized by the statistical experiment design concept. β-cyclodextrin loaded nanosponges were uniquely designed using the Placket-Burman approach and optimized utilizing the Box-Behnken method. The optimized nanosponges (EN-CDN) were  421.37 ± 6.19 nm in size with an entrapment efficiency of 70.13% ± 5.73%. The topical hydrogel of nanosponges (EN-TG) was prepared using carbopol 934 and pyrrolidone as permeation enhancers. In vitro skin permeation studies affirmed the improved transport crosswise the goatskin for topical hydrogel in comparison to the marketed product. EN-TG was able to control the fungal infection in the selected animal model in comparison to the marketed preparation. Stability studies reported favorably that nanogel remained stable under normal and accelerated settings.

In Vitro Microbiological and Drug Release of Silver/Ibuprofen Loaded Wound Dressing Designed for the Treatment of Chronically Infected Painful Wounds

This study consisted of developing a dressing loaded with silver (Ag) and ibuprofen (IBU) that provides a dual therapy, antibacterial and antalgic, intended for infected painful wounds. Therefore, non-woven polyethyleneterephtalate (PET) textiles nonwovens were pre-treated by cyclodextrin crosslinked with citric acid by a pad/dry/cure process. Then, textiles were impregnated in silver solution followed by a thermal treatment and were then coated by Layer-by-Layer (L-b-L) deposition of a polyelectrolyte multilayer (PEM) system consisting of anionic water-soluble poly(betacyclodextrin citrate) (PCD) and cationic chitosan. Finally, ibuprofen lysinate (IBU-L) was loaded on the PEM coating. We demonstrated the complexation of IBU with native βCD and PCD by phase solubility diagram and ¹H NMR. PEM system allowed complete IBU-L release in 6 h in PBS pH 7.4 batch (USP IV). On the other hand, microbiological tests demonstrated that loaded silver induced bacterial reduction of 4 Log₁₀ against S. aureus and E. coli and tests revealed that ibuprofen lysinate loading did not interfere with the antibacterial properties of the dressing.

Cyclodextrin Nanosponges Inclusion Compounds Associated with Gold Nanoparticles for Potential Application in the Photothermal Release of Melphalan and Cytoxan

This article describes the synthesis and characterization of β-cyclodextrin-based nano-sponges (NS) inclusion compounds (IC) with the anti-tumor drugs melphalan (MPH) and cytoxan (CYT), and the addition of gold nanoparticles (AuNPs) onto both systems, for the potential release of the drugs by means of laser irradiation. The NS-MPH and NS-CYT inclusion compounds were characterized using scanning electron microscopy (SEM), X-ray powder diffraction (XRPD), energy dispersive spectroscopy (EDS), thermogravimetric analysis (TGA), UV-Vis, and proton nuclear magnetic resonance (1H-NMR). Thus, the inclusion of MPH and CYT inside the cavities of NSs was confirmed. The association of AuNPs with the ICs was confirmed by SEM, EDS, TEM, and UV-Vis. Drug release studies using NSs synthesized with different molar ratios of β-cyclodextrin and diphenylcarbonate (1:4 and 1:8) demonstrated that the ability of NSs to entrap and release the drug molecules depends on the crosslinking between the cyclodextrin monomers. Finally, irradiation assays using a continuous laser of 532 nm showed that photothermal drug release of both MPH and CYT from the cavities of NSs via plasmonic heating of AuNPs is possible.

Cyclodextrins as carriers for volatile aroma compounds: A review

Cyclodextrins (CDs) are edible and biocompatible natural cyclic compounds that can encapsulate essential oils, flavours, volatile aroma compounds, and other substances. Complexation with CD-based materials improves the solubility and stability of volatile compounds and protects the bioactivity of the core materials. Therefore, the development of CD/volatile compound nanosystems is a key research area in the food, cosmetic, and pharmaceutical industries. This review briefly introduces the main types of natural CD; preparation methods of CD-based materials as carriers for aromatic substances or essential oils; characterisation methods used to calculate the interaction between CDs and volatile aroma compounds; molecular docking and simulation methods; and the application of CD-based nanosystems in different industries. The review aims to provide guidance for relevant practitioners in selecting appropriate CD materials and characterisation methods.

Cyclodextrin Monomers and Polymers for Drug Activity Enhancement

Cyclodextrins (CDs) and cyclodextrin (CD)-based polymers are well-known complexing agents. One of their distinctive features is to increase the quantity of a drug in a solution or improve its delivery. However, in certain instances, the activity of the solutions is increased not only due to the increase of the drug dose but also due to the drug complexation. Based on numerous studies reviewed, the drug appeared more active in a complex form. This review aims to summarize the performance of CDs and CD-based polymers as activity enhancers. Accordingly, the review is divided into two parts, i.e., the effect of CDs as active drugs and as enhancers in antimicrobials, antivirals, cardiovascular diseases, cancer, neuroprotective agents, and antioxidants.

Evaluation of adsorption ability of cyclodextrin-calixarene nanosponges towards Pb2+ ion in aqueous solution

Different cyclodextrin-calixarene nanosponges (CyCaNSs) have been characterized by means of FFC-NMR relaxometry, and used as sorbents to remove Pb²⁺ ions from aqueous solutions. Considering that the removal treatments may involve polluted waters with different characteristics, the adsorption experiments were performed on solutions without and with the addition of background salts, under different operational conditions. The adsorption abilities and affinities of the nanosponges towards Pb²⁺ ions were investigated by measuring the metal ion concentration by means of Inductively Coupled Plasma Emission Spectroscopy (ICP-OES) and Differential Pulse Anodic Stripping Voltammetry (DP-ASV). The acid-base properties of nanosponges and of metal ion as well as their interactions with the other interacting components of the systems have been considered in the evaluation of adsorption mechanism. Recycling and reuse experiments on the most efficient adsorbents were also performed. On the grounds of the results obtained, post-modified CyCaNSs appear promising materials for designing environmental remediation devices.

Formulation and in vitro evaluation of topical nanosponge-based gel containing butenafine for the treatment of fungal skin infection

In the current study, four formulae (BNS1-BNS4) of butenafine (BTF) loaded nanosponges (NS) were fabricated by solvent emulsification technology, using different concentration of ethyl cellulose (EC) and polyvinyl alcohol (PVA) as a rate retarding polymer and surfactant, respectively. Prepared NS were characterized for particle size (PS), polydispersity index (PDI), zeta potential (ZP), entrapment efficiency (EE) and drug loading (DL). Nanocarrier BNS3 was optimized based on the particle characterizations and drug encapsulation. It was further evaluated for physicochemical characterizations; FTIR, DSC, XRD and SEM. Selected NS BNS3 composed of BTF (100 mg), EC (200 mg) and 0.3% of PVA showed, PS (543 ± 0.67 nm), PDI (0.330 ± 0.02), ZP (-33.8 ± 0.89 mV), %EE (71.3 ± 0.34%) and %DL (22.8 ± 0.67%), respectively. Fabricated NS also revealed; polymer-drug compatibility, drug-encapsulation, non-crystalline state of the drug in the spherical NS as per the physicochemical evaluations. Optimized NS (BNS3) with equivalent amount of (1%, w/w or w/v) BTF was incorporated into the (1%, w/w or w/v) carbopol gel. BTF loaded NS based gel was then evaluated for viscosity, spreadability, flux, drug diffusion, antifungal, stability and skin irritation studies. BNS3 based topical gels exhibited a flux rate of 0.18 (mg/cm2.h), drug diffusion of 89.90 ± 0.87% in 24 h with Higuchi model following anomalous non-Fickian drug release. The BNS3 based-gel could be effective against pathogenic fungal strains.

Drug-Encapsulated Cyclodextrin Nanosponges

To date, a number of nanocarriers, either inorganic or organic, have been developed to improve the delivery and therapeutic efficacy of various drugs. Drug delivery systems have attempted to overcome the undesirable pharmacokinetic problems encountered. Among the various nanomaterials that have been designed as potential nanocarriers, cyclodextrin-based polymers are of particular interest in this review.Cyclodextrins (CD) are a class of cyclic glucopyranose oligomers, obtained from starch by enzymatic action, with a characteristic toroidal shape that forms a truncated cone-shaped lipophilic cavity. The main common native cyclodextrins are named α, β, and γ which comprise six, seven, and eight glucopyranose units, respectively. Cyclodextrins have the capability to include compounds whose size and polarity are compatible with those of their cavity.Cyclodextrin-based cross-linked polymers, often referred to as "cyclodextrin nanosponges" (CDNSs), attract great attention from researchers for solving major bioavailability problems such as inadequate solubility, poor dissolution rate, and limited stability of some agents, as well as increasing their effectiveness and decreasing unwanted side effects.Registered patents about this novel system in various fields, different pharmaceutical applications, and classes of drugs encapsulated by CDNSs are detailed. The features outlined make CDNSs a promising platform for the development of innovative and advanced delivery systems.

CD Oxyanions as a Tool for Synthesis of Highly Anionic Cyclodextrin Polymers

Water soluble highly anionic β-cyclodextrin-based polymers were synthesized by reaction between cyclodextrin oxyanion and pyromellitic anhydride. The synthesis method utilizes activation hydroxyl groups in anhydrous glucopyranosyl units (AGU) in the DMF solution with the use of NaH. In these conditions, like in the case of the cyclodextrin reactions in the highly alkaline media, there is a nucleophilic substitution of difunctional compounds, which develops a polymer network with various cyclodextrin substitution. Different molar ratios of the reagents were investigated in terms of molecular size, chemical structure and water solubility of the polymers. The separation of the polymer due to particle size by ultrafiltration process and HPSEC-MALLS-RI and MALDI-TOF MS measurements for molecular mass analysis were employed. The IR, H NMR, SEM, DSC and TG measurements were taken for the structural characterization of the polymers. Additionally, the solubility test and metal ion complexation processes were also investigated in a wide range of pH. These polymers could be used in several areas such as: improving the aqueous solubility of poor water-soluble molecules, removing heavy metals from waste water, protecting degradable substances or synthesizing new drug delivery systems.

Biomedical Application of Cyclodextrin Polymers Cross-Linked via Dianhydrides of Carboxylic Acids

Cyclodextrin-based nanosponges (CD-NS) are a novel class of polymers cross-linked with a three-dimensional network and can be obtained from cyclodextrins (CD) and pyromellitic dianhydride. Their properties, such as their ability to form an inclusion complex with drugs, can be used in biomedical science, as nanosponges influence stability, toxicity, selectivity, and controlled release. Most pharmaceutical research use CD-NS for the delivery of drugs in cancer treatment. Application of molecular targeting techniques result in increased selectivity of CD-NS; for example, the addition of disulfide bridges to the polymer structure makes the nanosponge sensitive to the presence of glutathione, as it can reduce such disulfide bonds to thiol moieties. Other delivery applications include dermal transport of pain killers or photosensitizers and delivery of oxygen to heart cells. This gives rise to the opportunity to transition to medical scaffolds, but more, in modern times, to create an ultrasensitive biosensor, which employs the techniques of surface-modified nanoparticles and molecularly imprinted polymers (MIP). The following review focuses on the biomedical research of cyclodextrin polymers cross-linked via dianhydrides of carboxylic acids.

Dexamethasone Sodium Phosphate Loaded Modified Cyclodextrin Based Nanoparticles: An Efficient Treatment for Rheumatoid Arthritis

The main aim of the current research was to develop a modified cyclodextrin based nanoparticulate drug delivery system to deliver dexamethasone sodium phosphate (DSP) for the treatment of rheumatoid arthritis (RA). DSP is a glucocorticoid (GC), and its limited application in RA therapy due to poor pharmacokinetics and its severe associated side effects. DSP loaded hydrophobically modified cyclodextrin based nanoparticles (DSP-NPs) prepared by a double emulsion solvent evaporation method. The nanoparticle size was <120 nm, good entrapment efficiency and excellent stability were obtained. TEM study showed that nanoparticles were perfectly spherical shape. The in-vitro drug release from nanoparticle follows the non-Fickian diffusion mechanism. The pharmacokinetic profile of DSP after encapsulation showing the 2.3-fold increase in AUC and extended mean residence time, which increases the chances of nanoparticles to extravasate into the site of inflammation by the EPR effect. The pharmacodynamic studies in the Adjuvant-induced Arthritis (AIA) rat model showing a significant reduction in arthritic score, paw thickness, and inflammatory cytokine level in serum. Adverse effects evaluation studies demonstrate a significant reduction in the associated undesirable effects on body weight, blood glucose level, renal impairment, and hematological abnormalities compared to marketed formulation. These results suggest that DSP-NPs can be used as an efficient therapy for RA.

Topical delivery of clobetasol propionate loaded nanosponge hydrogel for effective treatment of psoriasis: Formulation, physicochemical characterization, antipsoriatic potential and biochemical estimation

Clobetasol propionate (CP), a superpotent topical corticosteroid, holds great promise for psoriasis treatment. However, common side effects like skin atrophy, steroidal acne, hypopigmentation and allergic contact dermatitis associated with it, hamper its utility for topical application. Taking this into consideration, the current work was aimed to fabricate CP loaded cyclodextrin nanosponge (CDNS) based hydrogel, to alleviate the aforementioned side effects, while controlling drug release. Nanosponges were crafted employing β-cyclodextrin (polymer) and diphenyl carbonate (cross linker) and evaluated appropriately. The selected formulation augmented 45 folds water solubility, with respect to pure CP. The formulation possessed entrapment efficiency (56.33 ± 0.94%), particle size (194.27 ± 49.24 nm) with polydispersitive index (0.498 ± 0.095), surface charge (-21.83 ± 0.95 mV) and drug release (86.25 ± 0.28%). Selected CP-CDNS were found crystalline and uniform in size. Further, in vitro cell viability analysis has been performed using THP1 cells to evaluate cytocompatibility of CP nanosponges. The chosen CP nanosponges were then embedded into Carbopol hydrogel, and characterized for rheological behaviour, spreadability, and texture profile. The developed nanoformulations were also assessed in vivo using mouse tail model. Histological and biochemical assessments have been conducted to explore their antipsoriatic activity via oxidative stress biomarkers. The degree of orthokeratosis was observed remarkably (p < 0.001) amplified by CP-CDNS14 hydrogel as compared to untreated group (control) and CP hydrogel. In addition, drug activity and change in epidermal thickness were found significant. Our findings altogether advocated the profound potential of prepared CP nanogel in the topical treatment of psoriasis, with improved patient compliance.

Nanosponges as protein delivery systems: Insulin, a case study

Cyclodextrin-based nanosponges have been found to bepromising drug delivery systems. This paper investigates an application that still needs to be studied in depth, that is, the oral delivery of peptides and proteins, choosing insulin as a case study. The nanospongewas synthesized by crosslinkingβ-cyclodextrins withpyromellitic dianhydride, adopting a top-down approach for its subsequent formulation. Aphysicochemical characterization, in-vitro andin-vivo tests were carried out on the formulation developed. It was nanometric (around 250 nm) with high negative zeta potential, mucoadhesion and swelling properties, good loading capability (about 14%) and encapsulation efficiency (above 90%). The in-vitro release of insulin was negligible at a gastric pH (below 2%) while sustained at an intestinal pH, thus showing a pH-sensitive behaviour of the nanosponge. The Caco-2 cell permeability assay proved that the intestinal permeation of insulin was enhanced when loaded inside the nanosponge. The in-vivo studies confirmed the presence of insulin in rat plasma and a marked hypoglycemic effect in diabetic mice after duodenal and oral administrations, respectively. These preliminary results are encouraging with a view to continuing to study this β-cyclodextrin nanosponge technology for the oral administration of insulin and extending this approach to other proteins of pharmaceutical interest.

Comprehensive Review on Current Interventions, Diagnostics, and Nanotechnology Perspectives against SARS-CoV-2

The coronavirus disease 2019 (COVID-19) has dramatically challenged the healthcare system of almost all countries. The authorities are struggling to minimize the mortality along with ameliorating the economic downturn. Unfortunately, until now, there has been no promising medicine or vaccine available. Herein, we deliver perspectives of nanotechnology for increasing the specificity and sensitivity of current interventional platforms toward the urgent need of quickly deployable solutions. This review summarizes the recent involvement of nanotechnology from the development of a biosensor to fabrication of a multifunctional nanohybrid system for respiratory and deadly viruses, along with the recent interventions and current understanding about severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2).

Development and characterization of ethyl cellulose nanosponges for sustained release of brigatinib for the treatment of non-small cell lung cancer

Non-small cell lung cancer (NSCLC) contributes to about 85% of lung cancer. By 2040, lung cancer cases estimated to rise to 3.6 million globally. Brigatinib (BG) acts as tyrosine kinase inhibitors that target the epidermal growth factor receptor of the epithelial lung cancer cells. BG loaded nanosponges (NSs) were prepared by the emulsion solvent evaporation technique using ethylcellulose (EC) and polyvinyl alcohol (PVA) as a stabilizer. Eight formulations were developed by varying the concentration of the drug (BG), EC and PVA followed by optimization through particle characterization; size, polydispersity index (PDI), zeta potential (ZP), drug entrapment and loading efficiency. The optimized formulation BGNS5 showed particles size (261.0 ± 3.5 nm), PDI (0.301) and ZP(−19.83 ± 0.06 Mv) together with entrapment efficiency (85.69 ± 0.04%) and drug loading (17.69 ± 0.01%). FTIR, DSC, XRD, and SEM showed drug-polymer compatibility, entrapment of drug in EC core, non-crystallinity of BG in NS and confirm spherical porous nature of the NS. BGNS5 reflects drug release in a sustained manner, 86.91 ± 2.12% for about 12 h. BGNS5 significantly decreased the cell viability of A549 human lung cancer cell lines with less hemolytic ratio compared to pure drug BG and EC. Based on the aforementioned results BGNS5 could be used in the effective treatment of NSCLC.

Cyclodextrin Cationic Polymer-Based Nanoassemblies to Manage Inflammation by Intra-Articular Delivery Strategies

Injectable nanobioplatforms capable of locally fighting the inflammation in osteoarticular diseases, by reducing the number of administrations and prolonging the therapeutic effect is highly challenging. β-Cyclodextrin cationic polymers are promising cartilage-penetrating candidates by intra-articular injection due to the high biocompatibility and ability to entrap multiple therapeutic and diagnostic agents, thus monitoring and mitigating inflammation. In this study, nanoassemblies based on poly-β-amino-cyclodextrin (PolyCD) loaded with the non-steroidal anti-inflammatory drug diclofenac (DCF) and linked by supramolecular interactions with a fluorescent probe (adamantanyl-Rhodamine conjugate, Ada-Rhod) were developed to manage inflammation in osteoarticular diseases. PolyCD@Ada-Rhod/DCF supramolecular nanoassemblies were characterized by complementary spectroscopic techniques including UV-Vis, steady-state and time-resolved fluorescence, DLS and ζ-potential measurement. Stability and DCF release kinetics were investigated in medium mimicking the physiological conditions to ensure control over time and efficacy. Biological experiments evidenced the efficient cellular internalization of PolyCD@Ada-Rhod/DCF (within two hours) without significant cytotoxicity in primary human bone marrow-derived mesenchymal stromal cells (hMSCs). Finally, polyCD@Ada-Rhod/DCF significantly suppressed IL-1β production in hMSCs, revealing the anti-inflammatory properties of these nanoassemblies. With these premises, this study might open novel routes to exploit original CD-based nanobiomaterials for the treatment of osteoarticular diseases.

Utilization of biodegradable chitosan-derived sponges as oil retainers

An innovative approach of chitosan-derived biodegradable sponges with high sorption capacity, excellent recyclability, and inherent oleophilic properties have been developed for the first time to remove the crude oil polluting the environment. Chitosan-nitrogen mustard ionic carbonate-β-cyclodextrin (CH-NMIC-CD), chitosan-nitrogen mustard ionic carbonate (CH-NMIC), and chitosan (CH) sponges with macropores were prepared using tripolylphosphate (TPP) by adopting subsequent lyophilization. Detailed characterization such as FTIR, TGA, XRD, and SEM has been done to confirm the formation, stability, crystalline nature, and morphology of the prepared sponges. The FTIR spectra confirmed the successful incorporation of NMIC in CH-NMIC-CD and CH-NMIC and the presence of β-CD in the (CH-NMIC-CD). It was found from the TGA results that the presence of β-CD makes the sponge CH-NMIC-CD stable. SEM analysis showed the morphology of the sponges found to be highly porous with interconnected macropores. The oil absorption capacity was 12.30 g_oil/g_ns higher for the sponge CH-NMIC-CD followed by CH-NMIC and CH. The sponges showed reusability excellently even after consecutive sorption-desorption separation cycles for five times. Moreover, the sponges were completely biodegraded within 25 days. The finding holds a promising future to use CH-NMIC-CD sponges in pollutant entrapment particularly in the removal of crude oil and allied area.

Cyclodextrin nanosponge as a temoporfin nanocarrier: Balancing between accumulation and penetration in 3D tumor spheroids

As the intertissue delivery of hydrophobic temoporfin (mTHPC) remains inefficient, we propose the use of cyclodextrin-based nanosponges as a smart, advanced system for improved mTHPC delivery. Recently, we demonstrated that cyclodextrins (CDs) allow mTHPC to penetrate into tumor spheroids via a nanoshuttle mechanism. However, the CD complexes were very sensitive to the dilution, thus limiting their translation invivo. Hypercrosslinked CD monomers in a three-dimensional network (namely, CD nanosponges), however, may form both inclusion and non-inclusion complexes with drug molecules, providing controlled release and prolonged exposure to the drug. In the present work, we demonstrate that epichlorohydrin-crosslinked CD nanosponges based on β-CD (βCDp) and carboxymethyl-β-CD (CMβCDp) monomers efficiently encapsulated mTHPC. We calculated the apparent binding constants between mTHPC and CD polymers (K=(6.3-8.8) × 10⁶M^-1 and K=(1.2-1.7) × 10⁶M^-1 for βCDp and CMβCDp, respectively) using fluorescence titration curve fitting. The encapsulation of mTHPC in a CD polymer matrix had slower photosensitizer (PS) release compared to monomer CD units, providing deep penetration of mTHPC in 3D tumor spheroids in a concentration-dependent manner. However, the improvement of mTHPC penetration in 3D human pharynx squamous cell carcinoma (FaDu) spheroids using CD polymers was strongly accompanied by the inhibition of PS cellular uptake, demonstrating the delicate balance between the accumulation and the penetration of PS in FaDu spheroids. In summary, mTHPC-loaded CD nanosponges are a strong candidate for further invivo study in preclinical models, which could be considered as an advanced smart system for mTHPC delivery.

Mechanochemical green synthesis of hyper-crosslinked cyclodextrin polymers

Cyclodextrin nanosponges (CD-NS) are nanostructured crosslinked polymers made up of cyclodextrins. The reactive hydroxy groups of CDs allow them to act as multifunctional monomers capable of crosslinking to bi- or multifunctional chemicals. The most common NS synthetic pathway consists in dissolving the chosen CD and an appropriate crosslinker in organic polar aprotic liquids (e.g., N,N-dimethylformamide or dimethyl sulfoxide), which affect the final result, especially for potential biomedical applications. This article describes a new, green synthetic pathway through mechanochemistry, in particular via ball milling and using 1,1-carbonyldiimidazole as the crosslinker. The polymer obtained exhibited the same characteristics as a CD-based carbonate NS synthesized in a solvent. Moreover, after the synthesis, the polymer was easily functionalized through the reaction of the nucleophilic carboxylic group with three different organic dyes (fluorescein, methyl red, and rhodamine B) and the still reactive imidazoyl carbonyl group of the NS.

Biological Effect Evaluation of Glutathione-Responsive Cyclodextrin-Based Nanosponges: 2D and 3D Studies

This study aims to evaluate the bioeffects of glutathione-responsive β-cyclodextrin-based nanosponges (GSH-NSs) on two- (2D) and three-dimensional (3D) cell cultures. The bioeffects of two types of GSH-NS formulations, with low (GSH-NS B) and high (GSH-NS D) disulfide-bond content, were evaluated on 2D colorectal (HCT116 and HT-29) and prostatic (DU-145 and PC3) cancer cell cultures. In particular, the cellular uptake of GSH-NS was evaluated, as their effects on cell growth, mitochondrial activity, membrane integrity, cell cycle distribution, mRNA expression, and reactive oxygen species production. The effect of GSH-NSs on cell growth was also evaluated on multicellular spheroids (MCS) and a comparison of the GSH-NS cell growth inhibitory activity, in terms of inhibition concentration (IC)₅₀ values, was performed between 2D and 3D cell cultures. A significant decrease in 2D cell growth was observed at high GSH-NS concentrations, with the formulation with a low disulfide-bond content, GSH-NS B, being more cytotoxic than the formulation with a high disulfide-bond content, GSH-NS D. The cell growth decrease induced by GSH-NS was owing to G₁ cell cycle arrest. Moreover, a significant down-regulation of mRNA expression of the cyclin genes CDK1, CDK2, and CDK4 and up-regulation of mRNA expression of the cyclin inhibitor genes CDKN1A and CDKN2A were observed. On the other hand, a significant decrease in MCS growth was also observed at high GSH-NS concentrations, but not influenced by the nanosponge disulfide-bond content, with the MCS IC₅₀ values being significantly higher than those obtained on 2D cell cultures. GSH-NSs are suitable nanocarries as they provoke limited cellular effects, as cell cycle arrest only occurred at concentrations significantly higher than those used for drug delivery.

Preparation and characterization of cyclodextrin nanosponges for organic toxic molecule removal

Cyclodextrin-based nanosponges (CD-NS) are considered as safe and biocompatible systems for removing toxic molecules from the body. Rapid removal of toxic molecules that are formed in the body from certain food constituents, is relevant especially for patients affected by chronic kidney disease. Within the scope of this study, innovative cyclodextrin polymers were synthesized to form nanosponges able to remove indole, before it could form the toxic indoxyl sulfate in the body. Furthermore, in vivo studies were carried out using the two optimal CD-NS formulations by assessing physicochemical properties, stability, indole adsorption capacity and in vitro cytotoxicity. NS prepared from β-cyclodextrin cross-linked with toluene diisocyanate was found to be the most effective NS with an in vitro indole adsorption capacity of over 90%. In addition, this derivative was more stable in gastrointestinal media. Animal studies further revealed that oral CD-NSs did not tend to accumulate and damage gastrointestinal tissues and are excreted from the GI tract with minimal absorption. In conclusion, this study suggests that CD-NS formulations are effective and safe in removing toxic molecules from the body. Their potential use in veterinary or human medicine could reduce dialysis frequency and avoid hepatic and cardiac toxicity avoiding the indole formation.

Spectroscopic characterization and antimicrobial activity of nanoparticle doped cyclodextrin polyurethane bionanosponge

This study reports on the spectroscopic characterization and antimicrobial potency of polyurethane cyclodextrin co-polymerized phosphorylated multiwalled carbon nanotube-doped Ag-TiO₂ nanoparticle (pMWCNT-CD/Ag-TiO₂) bionanosponge nanocomposite. The synthesis of pMWCNT-CD/Ag-TiO₂ bionanosponge nanocomposite was carried out through the combined processes of amidation and polymerization reactions as well as the sol-gel method. The native nanosponge cyclodextrin and phosphorylated multiwalled carbon nanotube-nanosponge CD (pMWCNT-CD) polyurethanes were also prepared, and their antimicrobial activities carried out for comparison purposes. The synthesized bionanosponge polyurethane materials were characterized using Fourier-transform infrared (FTIR) spectroscopy, Laser Raman spectroscopy, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) to give clear information regarding their structural, and dynamic physicochemical properties. The potency tests of the synthesized compounds were carried out against three bacterial strains Escherichia coli, Bacillus subtilis, Staphylococcus aureus, and two fungal representatives Aspergillus ochraceus and Aspergillus fumigatus, using the disc diffusion method. Micro dilution and agar plating were used to determine the minimum bactericidal concentration (MBC) and minimum fungicidal concentration (MFC), respectively. The results obtained revealed that pMWCNT-CD/Ag-TiO₂ exhibits superior antibacterial and antifungal activities when compared to the other bionanosponge polymers tested. Thus, the bionanosponge polyurethane pMWCNT-CD/Ag-TiO₂ nanocomposite can be considered as an active antimicrobial compound (AMC).

History of Cyclodextrin Nanosponges

Nowadays, research in the field of nanotechnology and nanomedicine has become increasingly predominant, focusing on the manipulation and development of materials on a nanometer scale. Polysaccharides have often been used as they are safe, non-toxic, hydrophilic, biodegradable and are low cost. Among them, starch derivatives and, in particular, cyclodextrin-based nanosponges (CD NSs) have recently emerged due to the outstanding properties attributable to their peculiar structure. In fact, alongside the common polysaccharide features, such as the presence of tunable functional groups and their ability to interact with biological tissues, thus giving rise to bioadhesion, which is particularly useful in drug delivery, what makes CD NSs unique is their three-dimensional network made up of crosslinked cyclodextrin units. The name “nanosponge” appeared for the first time in the 1990s due to their nanoporous, sponge-like structure and responded to the need to overcome the limitations of native cyclodextrins (CDs), particularly their water solubility and inability to encapsulate charged and large molecules efficiently. Since CD NSs were introduced, efforts have been made over the years to understand their mechanism of action and their capability to host molecules with low or high molecular weight, charged, hydrophobic or hydrophilic by changing the type of cyclodextrin, crosslinker and degree of crosslinking used. They enabled great advances to be made in various fields such as agroscience, pharmaceutical, biomedical and biotechnological sectors, and NS research is far from reaching its conclusion. This review gives an overview of CD NS research, focusing on the origin and key points of the historical development in the last 50 years, progressing from relatively simple crosslinked networks in the 1960s to today’s multifunctional polymers. The approach adopted in writing the present study consisted in exploring the historical evolution of NSs in order to understand their role today, and imagine their future.

Pyromellitic dianhydride crosslinked soluble cyclodextrin polymers: Synthesis, lopinavir release from sub-micron sized particles and anti-HIV-1 activity

We report the synthesis of water soluble cyclodextrin (CD) polymers prepared by crosslinking pyromellitic dianhydride (PMDA) with two CD derivatives (methyl-β-CD - MβCD and (2-hydroxy)propyl-β-CD - HPβCD) and their evaluation as functional sub-micron sized carriers in the development of antiretroviral drug delivery systems. Using the protease inhibitor lopinavir (LPV) as model drug, LPV loaded CD polymers (pHPβCD and pMβCD) were prepared and fully characterized. The physicochemical characterization and in vitro drug release confirmed the successful synthesis of pHPβCD and pMβCD, the formation of sub-micron sized particles and a 12-14 fold increase in LPV solubility. Cytotoxicity assays indicated that both pHPβCD and pMβCD were able to improve the safety profile of LPV while the viral infectivity assay revealed a concentration independent anti-HIV-1 effect for both pHPβCD and pMβCD with a maximum percentage inhibition (MPI) of 79 and 91% respectively. After LPV loading, the antiviral profile of pHPβCD was reversed to the sigmoidal dose-response profile of LPV, while pMβCD maintained its dose-independent profile followed by a LPV mediated increase in viral inhibition. Overall, both pHPβCD and pMβCD demonstrated anti-HIV-1 activity, while drug loaded pMβCD indicated its potential as functional sub-micron sized drug delivery polymers for achieving synergistic anti-HIV activity.

Formulation and evaluation of cyclodextrin-based nanosponges of griseofulvin as pediatric oral liquid dosage form for enhancing bioavailability and masking bitter taste

The aim of this study was the development of griseofulvin (GRI) loaded β-cyclodextrin (β–CD) based nanosponges for bitter taste masking, improving dissolution rate and oral bioavailability. Plain NS (NS1 NS2 and NS3) were fabricated by reacting β-CD with the cross-linker diphenyl carbonate at different molar ratios (1:2, 1:4 and 1:6, respectively) using ultrasonication method. The NS2 provided both highest %yield and GRI solubilization enhancement. Thus, the drug was loaded in NS2 at different NS2: drug weight ratios in presence or absence of 0.25%w/w polyvinylpyrolidone (PVP k30). The GRI loaded NS (F1) that provided highest drug loading capacity and entrapment efficiency (47.20 ± 0.38%, 84.91 ± 0.30%, respectively) was morphologically examined using scanning electron microscopy (SEM). Also, Particle size, zeta potential, differential scanning calorimetry (DSC), Fourier transform infra-red (FT-IR), nuclear magnetic resonance (NMR) spectroscopy, in-vitro release, taste masking potential were evaluated. Moreover, in-vivo Pharmacokinetic studies were performed on rats. The F1 showed particle size 665.9 ± 13.8 nm and zeta potential −21.5 ± 0.7 mV. The DSC and FT-IR analysis confirmed the complexation of GRI with NS2. Nanosponges (F1) provided 3.19, folds increase in dissolution efficiency %, 2.13 and 3.78 folds increase in C_max and AUC_0-48 compared to plain GRI. Taste masking evaluation confirmed the potential of GRI nanosponges (F1) in masking the bitter taste of GRI completely. The study confirmed that complexation of GRI with NS would be a viable approach for masking the bitter taste of GRI and improving oral bioavailability, that Cmax, Tmax and AUC 0–48 were significantly higher for the developed formulation (F1).

Immunotherapy of experimental melanoma with ICOS-Fc loaded in biocompatible and biodegradable nanoparticles

Inducible T-cell costimulator (ICOS) upon binding to its ligand (ICOSL) mediates adaptive immunity and antitumor response. Thus, antitumor therapies targeting the ICOS/ICOSL pathway hold great promise for cancer treatment. In this regard, ICOSL triggering by a soluble recombinant form of ICOS (ICOS-Fc) hampered adhesiveness and migration of dendritic, endothelial, and tumor cells in vitro. Furthermore, in vivo treatment with ICOS-Fc previously showed the capability to inhibit lung metastatization of ICOSL⁺ B16-F10 melanoma cells when injected intravenously in mice, but it failed to block the growth of established subcutaneous B16-F10 murine tumors. Thus, we asked whether passive targeting of solid tumors with ICOS-Fc-loaded biocompatible and biodegradable nanoparticles (NPs) could instead prove effectiveness in reducing tumor growth. Here, ICOS-Fc was loaded in two types of polymer nanoparticles, i.e. cross-linked β-cyclodextrin nanosponges (CDNS) and poly(lactic-co-glycolic acid) (PLGA) NPs and in vitro characterized. In vivo experiments showed that treatment of C57BL6/J mice with ICOS-Fc loaded into the two nanoformulations inhibits the growth of established subcutaneous B16-F10 tumors. This anticancer activity appears to involve both anti-angiogenic and immunoregulatory effects, as shown by decreased tumor vascularization and downmodulation of IL-10 and Foxp3, two markers of regulatory T cells (Tregs). Overall, the substantial in vivo anticancer activity of ICOS-Fc-loaded CDNS and PLGA NPs against different components of the tumor microenvironment makes these nanoformulations attractive candidates for future combination cancer therapy.

Improvement in the Anti-Tumor Efficacy of Doxorubicin Nanosponges in In Vitro and in Mice Bearing Breast Tumor Models

Doxorubicin (DOX) is an anthracycline widely used in cancer therapy and in particular in breast cancer treatment. The treatment with DOX appears successful, but it is limited by a severe cardiotoxicity. This work evaluated the in vitro and in vivo anticancer effect of a new formulation of β-cyclodextrin nanosponges containing DOX (BNS-DOX). The BNS-DOX effectiveness was evaluated in human and mouse breast cancer cell lines in vitro in terms of effect on cell growth, cell cycle distribution, and apoptosis induction; and in vivo in BALB-neuT mice developing spontaneous breast cancer in terms of biodistribution, cancer growth inhibition, and heart toxicity. BNS-DOX significantly inhibited cancer cell proliferation, through the induction of apoptosis, with higher efficiency than free DOX. The breast cancer growth in BALB-neuT mice was inhibited by 60% by a BNS-DOX dose five times lower than the DOX therapeutic dose, with substantial reduction of tumor neoangiogenesis and lymphangiogenesis. Biodistribution after BNS-DOX treatment revealed a high accumulation of DOX in the tumor site and a low accumulation in the hearts of mice. Results indicated that use of BNS may be an efficient strategy to deliver DOX in the treatment of breast cancer, since it improves the anti-cancer effectiveness and reduces cardiotoxicity.

Natural cyclodextrins and their derivatives for polymer synthesis

A toolbox of cyclodextrin derivatives, synthetic strategies for the preparation of cyclodextrin-polymer conjugates using various polymerisation techniques and representative applications of such conjugates are discussed.

In vitro and in vivo characteristics of doxorubicin-loaded cyclodextrine-based polyester modified gadolinium oxide nanoparticles: a versatile targeted theranostic system for tumour chemotherapy and molecular resonance imaging

β-Cyclodextrine-based polyester was coated on the surface of gadolinium oxide nanoparticles (NPs) and then functionalised with folic acid to produce an efficient pH-sensitive targeted theranostic system (Gd₂O₃@PCD-FA) for doxorubicin delivery and magnetic resonance imaging (MRI). Gd₂O₃@PCD-FA was fully characterised by FTIR, vibrating sample magnetometer, TGA, XRD, SEM and TEM analyses. The dissolution profile of DOX showed a pH sensitive release. No significant toxicity was observed for the targeted NPs (Gd₂O₃@PCD-FA) and DOX-loaded NPs inhibiting M109 cells viability more efficiently than free DOX. Moreover, the negligible hemolytic activity of the targeted NPs showed their appropriate hemocompatibility. The preferential uptake was observed for the developed Gd₂O₃@PCD-FA-DOX NPs in comparison with Dotarem using T₁- and T₂-weighted MRI in the presence of folate receptor-positive and folate receptor-negative cancer cells (M109 and 4T1, respectively). Furthermore, in vivo studies revealed that Gd₂O₃@PCD-FA-DOX not only exhibited considerably relaxivity performance as a contrast agent for MRI, but also improved in vivo anti-tumour efficacy of the system. The results suggest that Gd₂O₃@PCD-FA-DOX improves its therapeutic efficacy in the treatment of solid tumours and also reduces the adverse effects, so it could be proposed as a promising drug delivery system for chemotherapy and molecular imaging diagnosis in MRI.

Cyclodextrin Inclusion of Medicinal Compounds for Enhancement of their Physicochemical and Biopharmaceutical Properties

Owing to their wide structural diversity and unique complexing properties, cyclodextrins (CDs) find manifold applications in drug discovery and development. The focus of this mini-review is on their uses as 'enabling excipients' both in the context of early drug discovery and in subsequent optimisation of drug performance. Features highlighted here include descriptions of the structures of CDs, synthetic derivatisation to fine-tune their properties, the nature of inclusion complexation of drugs within the CD cavity, methodology for the study of free and complexed hosts in the solid state and in solution, the inherent pharmacological activity of several CDs and its utility, novel CD-based drug delivery systems, and the role of CDs in drug discovery and optimisation. Illustrative examples are generally based on research reported during the last two decades. Application of CDs to the optimisation of the performance of established drugs is commonplace, but there are many opportunities for the intervention of CDs during the early stages of drug discovery, which could guide the selection of suitable candidates for development, thereby contributing to reducing the attrition rate of new molecular entities.

Comparative Evaluation of Solubility, Cytotoxicity and Photostability Studies of Resveratrol and Oxyresveratrol Loaded Nanosponges

Resveratrol and oxyresveratrol are natural polyphenolic stilbenes with several important pharmacological activities. However, low solubility and aqueous instability are the major limitations in their drug delivery applications. In the present work, we demonstrated the encapsulation of resveratrol and oxyresveratrol with nanosponge to improve solubility and stability. Several characterization techniques were used to confirm the encapsulation of both drug molecules within the nanosponges. The high encapsulation efficiency of resveratrol (77.73%) and oxyresveratrol (80.33%) was achieved within the nanosponges. Transmission electron microscopy suggested uniform spherical size particles of resveratrol and oxyresveratrol loaded nanosponges. Compared to free drugs, better protection against UV degradation was observed for resveratrol-loaded nanosponge (2-fold) and oxyresveratrol-loaded nanosponge (3-fold). Moreover, a higher solubilization of resveratrol- and oxyresveratrol-loaded nanosponges lead to a better antioxidant activity compared to drug molecules alone. Cytotoxicity studies against DU-145 prostate cancer cell lines further suggested improved activity of both resveratrol and oxyresveratrol-loaded nanosponges without any significant toxicity of blank nanosponges.

Pyromellitic dianhydride crosslinked cyclodextrin nanosponges for curcumin controlled release; formulation, physicochemical characterization and cytotoxicity investigations

Aim: In this study, a nanosponge structure was synthesised with capability of encapsulating curcumin as a model polyphenolic compound and one of the herbal remedies that have widely been considered due to its ability to treat cancer.Methods: FTIR, DSC and XRD techniques were performed to confirm the formation of the inclusion complex of the nanosponge-drug.Results: DSC and XRD patterns showed an increasing stability and a decreasing crystallinity of curcumin after formation of inclusion complex. Encapsulation efficiency was 98% (w/w) and a significant increase was observed in loading capacity (184% w/w). The results of cytotoxicity assessments demonstrated no cell toxicity on the healthy cell line, while being toxic against cancer cells. Haemolysis test was performed to evaluate the blood-compatibility characteristic of nanosponge and complex and the results showed 0.54% haemolysis in the lowest complex concentration (50μgml^-1) and 5.09% at the highest concentration (200μgml^-1).Conclusions: Thus, the introduced system could be widely considered in cancer treatment as a drug delivery system.

Bio-Functional Textiles: Combining Pharmaceutical Nanocarriers with Fibrous Materials for Innovative Dermatological Therapies

In the field of pharmaceutical technology, significant attention has been paid on exploiting skin as a drug administration route. Considering the structural and chemical complexity of the skin barrier, many research works focused on developing an innovative way to enhance skin drug permeation. In this context, a new class of materials called bio-functional textiles has been developed. Such materials consist of the combination of advanced pharmaceutical carriers with textile materials. Therefore, they own the possibility of providing a wearable platform for continuous and controlled drug release. Notwithstanding the great potential of these materials, their large-scale application still faces some challenges. The present review provides a state-of-the-art perspective on the bio-functional textile technology analyzing the several issues involved. Firstly, the skin physiology, together with the dermatological delivery strategy, is keenly described in order to provide an overview of the problems tackled by bio-functional textiles technology. Secondly, an overview of the main dermatological nanocarriers is provided; thereafter the application of these nanomaterial to textiles is presented. Finally, the bio-functional textile technology is framed in the context of the different dermatological administration strategies; a comparative analysis that also considers how pharmaceutical regulation is conducted.