Synthesis of highly crystalline and monodisperse maghemite nanocrystallites without a size-selection process

Shape control and associated magnetic properties of spinel cobalt ferrite nanocrystals

By combining nonhydrolytic reaction with seed-mediated growth, high-quality and monodisperse spinel cobalt ferrite, CoFe(2)O(4), nanocrystals can be synthesized with a highly controllable shape of nearly spherical or almost perfectly cubic. The shape of the nanocrystals can also be reversibly interchanged between spherical and cubic morphology through controlling nanocrystal growth rate. Furthermore, the magnetic studies show that the blocking temperature, saturation, and remanent magnetization of nanocrystals are solely determined by the size regardless the spherical or cubic shape. However, the shape of the nanocrystals is a dominating factor for the coercivity of nanocrystals due to the effect of surface anisotropy. Such magnetic nanocrystals with distinct shapes possess tremendous potentials in fundamental understanding of magnetism and in technological applications of magnetic nanocrystals for high-density information storage.

Water-based ferrofluids from FexPt1-x nanoparticles synthesized in organic media

This paper describes an effective method to transfer oleic acid/oleylamine-capped colloidal FePt nanoparticles dispersed in hexane into water, using tetramethylammonium hydroxide (TMAOH) as a phase transfer agent. FexPt1-x nanoparticles with different compositions (x = 0.32, 0.40, 0.48, 0.60, 0.66, 0.69) in the size range of 2-4 nm were synthesized by a high-temperature organometallic route with oleic acid and oleylamine as stabilizers. The surface of such nanoparticles was modified through removal of the organic, hydrophobic layer and adsorption of TMAOH, which provides the nanoparticles with sufficient surface charge so that an electrostatic double layer builds up, and the FePt nanoparticles can be fully redispersed in aqueous solution, even with high concentrations. The water-dispersible FePt nanoparticles were characterized by transmission electron microscopy, electrophoretic mobility, X-ray diffraction, and Fourier transform infrared spectroscopy.

Monodisperse MFe2O4 (M = Fe, Co, Mn) nanoparticles

High-temperature solution phase reaction of iron(III) acetylacetonate, Fe(acac)(3), with 1,2-hexadecanediol in the presence of oleic acid and oleylamine leads to monodisperse magnetite (Fe(3)O(4)) nanoparticles. Similarly, reaction of Fe(acac)(3) and Co(acac)(2) or Mn(acac)(2) with the same diol results in monodisperse CoFe(2)O(4) or MnFe(2)O(4) nanoparticles. Particle diameter can be tuned from 3 to 20 nm by varying reaction conditions or by seed-mediated growth. The as-synthesized iron oxide nanoparticles have a cubic spinel structure as characterized by HRTEM, SAED, and XRD. Further, Fe(3)O(4) can be oxidized to Fe(2)O(3), as evidenced by XRD, NEXAFS spectroscopy, and SQUID magnetometry. The hydrophobic nanoparticles can be transformed into hydrophilic ones by adding bipolar surfactants, and aqueous nanoparticle dispersion is readily made. These iron oxide nanoparticles and their dispersions in various media have great potential in magnetic nanodevice and biomagnetic applications.

Designed Synthesis of Atom-Economical Pd/Ni Bimetallic Nanoparticle-Based Catalysts for Sonogashira Coupling Reactions

We synthesized Ni/Pd core/shell nanoparticles from the consecutive thermal decomposition of metal-surfactant complexes. The nanoparticle catalyst was atom-economically applied for various Sonogashira coupling reactions.

Carbon Nanotube Synthesis in Supercritical Toluene

Multiwall carbon nanotubes (MWNTs) were synthesized in supercritical toluene at 600 degrees C and approximately 12.4 MPa using ferrocene, Fe, or FePt nanocrystals as growth catalysts. Toluene serves as both the carbon source for nanotube formation and the solvent. In contrast to vapor-phase synthetic routes, the supercritical solvent provides high precursor concentration and a homogeneous reaction environment with dispersed growth catalyst particles. Both carbon filaments and MWNTs are produced by this approach, and a growth mechanism is proposed to explain the factors that determine the nanotube versus filament morphology. The plasmon energies of the pi and pi + sigma valence electrons were measured using electron energy-loss spectroscopy (EELS) of individual carbon fibers and MWNTs as a characterization tool to complement the imaging data obtained from electron microscopy.

Shape Evolution of Single-Crystalline Iron Oxide Nanocrystals

Shape- and size-controlled synthesis of single-crystalline maghemite (gamma-Fe2O3) nanocrystals are performed by utilizing a solution-based one-step thermolysis method. Modulating the growth parameters, such as the type and amount of capping ligands as well as the growth time, is shown to have a significant effect on the overall shape and size of the obtained nanocrystals and on the ripening process itself. The resulting shapes of the novel structures are diverse, including slightly faceted spheres, diamonds, prisms, and hexagons, all of which are in fact truncated dodecahedron structures with different degrees of truncation along the {111}, {110}, or {100} faces. Spherical nanocrystals are easily assembled into the three-dimensional superlattices, demonstrating the uniformity of these nanocrystals. The size-dependent magnetic properties are examined, and large hexagon-shaped gamma-Fe2O3 nanocrystals are shown to be ferrimagnetic at room temperature.

Use of water-dispersible Fe(2)O(3) nanoparticles with narrow size distributions in isolating avidin

Synthetic approaches that vigorously control the microstructures of water-dispersible gamma-Fe(2)O(3) nanoparticles such as size and size uniformity are of importance to the potential biological applications of these nanomaterials. In the present paper, water-dispersible gamma-Fe(2)O(3) nanocrystals with narrow size distributions (bipy-Fe(2)O(3)) were prepared via a site-exchange reaction. These particular materials are superparamagnetic and stable within a wide range of pH. Introduction of the biotin functionality onto the surfaces of bipy-Fe(2)O(3) enabled the affinity isolation of the protein avidin from its incubation solution magnetically with 96% efficiency.

Generalized and facile synthesis of semiconducting metal sulfide nanocrystals

We report on the synthesis of semiconductor nanocrystals of PbS, ZnS, CdS, and MnS through a facile and inexpensive synthetic process. Metal-oleylamine complexes, which were obtained from the reaction of metal chloride and oleylamine, were mixed with sulfur. The reaction mixture was heated under appropriate experimental conditions to produce metal sulfide nanocrystals. Uniform cube-shaped PbS nanocrystals with particle sizes of 6, 8, 9, and 13 nm were synthesized. The particle size was controlled by changing the relative amount of PbCl(2) and sulfur. Uniform 11 nm sized spherical ZnS nanocrystals were synthesized from the reaction of zinc chloride and sulfur, followed by one cycle of size-selective precipitation. CdS nanocrystals that consist of rods, bipods, and tripods were synthesized from a reaction mixture containing a 1:6 molar ratio of cadmium to sulfur. Spherical CdS nanocrystals (5.1 nm sized) were obtained from a reaction mixture with a cadmium to sulfur molar ratio of 2:1. MnS nanocrystals with various sizes and shapes were synthesized from the reaction of MnCl(2) and sulfur in oleylamine. Rod-shaped MnS nanocrystals with an average size of 20 nm (thickness) x 37 nm (length) were synthesized from a 1:1 molar ratio of MnCl(2) and sulfur at 240 degrees C. Novel bullet-shaped MnS nanocrystals with an average size of 17 nm (thickness) x 44 nm (length) were synthesized from the reaction of 4 mmol of MnCl(2) and 2 mmol of sulfur at 280 degrees C for 2 h. Shorter bullet-shaped MnS nanocrystals were synthesized from a 3:1 molar ratio of MnCl(2) and sulfur. Hexagon-shaped MnS nanocrystals were also obtained. All of the synthesized nanocrystals were highly crystalline.

Synthesis of monodisperse nanocrystals of manganese oxides

We report a simple and effective method for the generation of high-quality nanocrystals of manganese oxide, MnO, with an alkyl capping group. MnO is a model system for the theoretical study of electronic and magnetic properties of rock salt oxides. Synthesis of relatively monodisperse nanocrystals of MnO was achieved over a range of sizes between 7 and 20 nm. The nanocrystals are readily dispersed in nonpolar solvents, and their uniformity allows for the formation of superlattices, as observed by TEM. Fitting size evolution/time data with the Lifshitz-Slyozov-Wagner model indicates that the increase in particle size from 7 nm is dominated by diffusion-limited growth. Controlled chemical oxidation can allow for the preparation of nanocrystals of Mn3O4 from MnO. We demonstrate the use of acetate precursors in the preparation of ligand-capped, transition metal oxide nanocrystals (of MnO and FeO), which are safer and more environmentally benign than their metal carbonyl counterparts.

Study of Nucleation and Growth in the Organometallic Synthesis of Magnetic Alloy Nanocrystals: The Role of Nucleation Rate in Size Control of CoPt3 Nanocrystals

High quality CoPt(3) nanocrystals were synthesized via simultaneous reduction of platinum acetylacetonate and thermodecomposition of cobalt carbonyl in the presence of 1-adamantanecarboxylic acid and hexadecylamine as stabilizing agents. The high flexibility and reproducibility of the synthesis allows us to consider CoPt(3) nanocrystals as a model system for the hot organometallic synthesis of metal nanoparticles. Different experimental conditions (reaction temperature, concentration of stabilizing agents, ratio between cobalt and platinum precursors, etc.) have been investigated to reveal the processes governing the formation of the metal alloy nanocrystals. It was found that CoPt(3) nanocrystals nucleate and grow up to their final size at an early stage of the synthesis with no Ostwald ripening observed upon further heating. In this case, the nanocrystal size can be controlled only via proper balance between the rates for nucleation and for growth from the molecular precursors. Thus, the size of CoPt(3) nanocrystals can be precisely tuned from approximately 3 nm up to approximately 18 nm in a predictable and reproducible way. The mechanism of homogeneous nucleation, evolution of the nanocrystal ensemble in the absence of Ostwald ripening, nanocrystal faceting, and size-dependent magnetic properties are investigated and discussed on the example of CoPt(3) magnetic alloy nanocrystals. The developed approach was found to be applicable to other systems, e.g., FePt and CoPd(2) magnetic alloy nanocrystals.

Three-dimensional binary superlattices of magnetic nanocrystals and semiconductor quantum dots

Recent advances in strategies for synthesizing nanoparticles--such as semiconductor quantum dots, magnets and noble-metal clusters--have enabled the precise control of composition, size, shape, crystal structure, and surface chemistry. The distinct properties of the resulting nanometre-scale building blocks can be harnessed in assemblies with new collective properties, which can be further engineered by controlling interparticle spacing and by material processing. Our study is motivated by the emerging concept of metamaterials-materials with properties arising from the controlled interaction of the different nanocrystals in an assembly. Previous multi-component nanocrystal assemblies have usually resulted in amorphous or short-range-ordered materials because of non-directional forces or insufficient mobility during assembly. Here we report the self-assembly of PbSe semiconductor quantum dots and Fe2O3 magnetic nanocrystals into precisely ordered three-dimensional superlattices. The use of specific size ratios directs the assembly of the magnetic and semiconducting nanoparticles into AB13 or AB2 superlattices with potentially tunable optical and magnetic properties. This synthesis concept could ultimately enable the fine-tuning of material responses to magnetic, electrical, optical and mechanical stimuli.

Multigram scale synthesis and characterization of monodisperse tetragonal zirconia nanocrystals

A new and simple method has been developed to synthesize large quantities of highly monodisperse tetragonal zirconia nanocrystals. In this synthesis, a nonhydrolytic sol-gel reaction between zirconium(IV) isopropoxide and zirconium(IV) chloride at 340 degrees C generated 4 nm sized zirconia nanoparticles. A high-resolution transmission electron microscopic (HRTEM) image showed that the particles have a uniform particle size distribution and that they are highly crystalline. These monodisperse nanoparticles were synthesized without any size selection process. X-ray diffraction studies combined with Rietveld refinement revealed that the ZrO(2) nanocrystals are the high-temperature tetragonal phase, and very close to a cubic phase. When zirconium(IV) bromide is used as a precursor instead of zirconium chloride, zirconia nanoparticles with an average size of 2.9 nm were obtained. The UV-visible absorption spectrum of 4 nm sized zirconia nanoparticles exhibited a strong absorption starting at around 270 nm. A fluorescence spectrum with excitation at 300 nm showed a broad fluorescence band centered around 370 nm. FTIR spectra showed indication of TOPO binding on the ZrO(2) nanoparticle surface. These optical studies also suggest that the nanoparticles are of high quality in terms of narrow particle size distribution and relatively low density of surface trap states.

Synthesis of alkyl sulfonate/alcohol-protected gamma-Fe(2)O(3) nanocrystals with narrow size distributions

Highly crystalline gamma-Fe(2)O(3) nanoparticles with narrow size distributions that are coated with 1-undecanesulfonic acid were synthesized via two distinct approaches using oxidation and site-exchange reactions. However, similar nanocrystals protected with 1-octanol could only be achieved via the site-exchange method, while the oxidation approach led to Fe(2)O(3) nanoparticles of poor crystallinity and size uniformity. Our magnetization measurements confirmed the superparamagnetic nature of our Fe(2)O(3) nanoparticle products and the effects of the coating materials on magnetization properties.

Patterned langmuir-blodgett films of monodisperse nanoparticles of iron oxide using soft lithography

Langmuir-Blodgett (LB) films of monodisperse iron oxide nanoparticles have been successfully deposited onto patterned poly(dimethylsiloxane) surfaces. These patterned LB films of iron oxide nanoparticles were transferred onto solid substrates using micro contact printing.

Reactivity of 3d transition metal cations in diethylene glycol solutions. Synthesis of transition metal ferrites with the structure of discrete nanoparticles complexed with long-chain carboxylate anions

Study of the reactivity of 3d transition metal cations in diethylene glycol solutions revealed several key features that made it possible to develop a new method for synthesis of the nanocrystalline transition metal ferrites. The 3-7 nm particles of [MFe2O4]n[O2CR]m, where M = Mn, Fe, Co, Ni, and Zn, ligated on their surface with long-chain carboxylate anions, have been obtained in an isolated yield of 75-90%. The key features are the following. Complexation of the first-row transition metal cations with diethylene glycol at a presence of alkaline hydroxide is sufficient to enable control over the rate of their hydrolysis. The reaction of hydrolysis leads to the formation of metal oxide nanocrystals in colloidal solution. The nanoparticles growth is terminated by an added long-chain carboxylic acid, which binds to their surface and acts as a capping ligand. The isolated nanocrystalline powders are stable against agglomeration and highly soluble in nonpolar organic solvents.

Size-controlled synthesis of magnetite nanoparticles

Monodisperse magnetite nanoparticles have been synthesized by high-temperature solution-phase reaction of Fe(acac)3 in phenyl ether with alcohol, oleic acid, and oleylamine. Seed-mediated growth is used to control Fe3O4 nanoparticle size, and variously sized nanoparticles from 3 to 20 nm have been produced. The as-synthesized Fe3O4 nanoparticles have inverse spinel structure, and their assemblies can be transformed into gamma-Fe2O3 or alpha-Fe nanoparticle assemblies, depending on the annealing conditions. The reported procedure can be used as a general approach to various ferrite nanoparticles and nanoparticle superlattices.

Magnetically-induced solid-state electrochemical detection of DNA hybridization

A magnetic triggering of a solid-state electrical transduction of DNA hybridization is described. Positioning of an external magnet below the thick-film electrode attracts the DNA/particle network and enables the solid-state electrochemical stripping detection of the silver tracer. TEM imaging indicates that the hybridization event results in a three-dimensional aggregate structure in which duplex segments link the metal nanoparticles and magnetic spheres, and that most of this assembly is covered with the silver precipitate. This leads to a direct contact of the metal tag with the surface (in connection to the magnetic collection) and enables the solid-state electrochemical transduction (without prior dissolution and subsequent electrodeposition of the metal), using oxidative dissolution of the silver tracer. No such aggregates (and hence magnetic "collection") are observed in the presence of noncomplementary DNA, that is, without the linking hybrid. The new method couples high sensitivity of silver-amplified assays with effective discrimination against excess of closely related nucleotide sequences (including single-base imperfections). Such direct electrical detection of DNA/metal-particle assemblies can bring new capabilities to the detection of DNA hybridization, and could be applied to other bioaffinity assays.