Polymer-peptide block copolymers - an overview and assessment of synthesis methods

Incorporating peptide blocks into block copolymers opens up new realms of bioactive or smart materials. Because there are such a variety of peptides, polymers, and hybrid architectures that can be imagined, there are many different routes available for the synthesis of these chimera molecules. This review summarizes the contemporary strategies in combining synthesis techniques to create well-defined peptide-polymer hybrids that retain the vital aspects of each disparate block. Living polymerization can be united with the molecular-level control afforded by peptide blocks to yield block copolymers that not only have precisely defined primary structures, but that also interact with other (bio)molecules in a well defined manner.

Oxide contacts in organic photovoltaics: characterization and control of near-surface composition in indium-tin oxide (ITO) electrodes

The recent improvements in the power conversion efficiencies of organic photovoltaic devices (OPVs) promise to make these technologies increasingly attractive alternatives to more established photovoltaic technologies. OPVs typically consist of photoactive layers 20-100 nm thick sandwiched between both transparent oxide and metallic electrical contacts. Ideal OPVs rely on ohmic top and bottom contacts to harvest photogenerated charges without compromising the power conversion efficiency of the OPV. Unfortunately, the electrical contact materials (metals and metal oxides) and the active organic layers in OPVs are often incompatible and may be poorly optimized for harvesting photogenerated charges. Therefore, further optimization of the chemical and physical stabilities of these metal oxide materials with organic materials will be an essential component of the development of OPV technologies. The energetic and kinetic barriers to charge injection/collection must be minimized to maximize OPV power conversion efficiencies. In this Account, we review recent studies of one of the most common transparent conducting oxides (TCOs), indium-tin oxide (ITO), which is the transparent bottom contact in many OPV technologies. These studies of the surface chemistry and surface modification of ITO are also applicable to other TCO materials. Clean, freshly deposited ITO is intrinsically reactive toward H(2)O, CO, CO(2), etc. and is often chemically and electrically heterogeneous in the near-surface region. Conductive-tip atomic force microscopy (C-AFM) studies reveal significant spatial variability in electrical properties. We describe the use of acid activation, small-molecule chemisorption, and electrodeposition of conducting polymer films to tune the surface free energy, the effective work function, and electrochemical reactivity of ITO surfaces. Certain electrodeposited poly(thiophenes) show their own photovoltaic activity or can be used as electronically tunable substrates for other photoactive layers. For certain photoactive donor layers (phthalocyanines), we have used the polarity of the oxide surface to accelerate dewetting and "nanotexturing" of the donor layer to enhance OPV performance. These complex surface chemistries will make oxide/organic interfaces one of the key focal points for research in new OPV technologies.

"Plastic" solar cells: self-assembly of bulk heterojunction nanomaterials by spontaneous phase separation

As the global demand for low-cost renewable energy sources intensifies, interest in new routes for converting solar energy to electricity is rapidly increasing. Although photovoltaic cells have been commercially available for more than 50 years, only 0.1% of the total electricity generated in the United States comes directly from sunlight. The earliest commercial solar technology remains the basis for the most prevalent devices in current use, namely, highly-ordered crystalline, inorganic solar cells, commonly referred to as silicon cells. Another class of solar cells that has recently inspired significant academic and industrial excitement is the bulk heterojunction (BHJ) "plastic" solar cell. Research by a rapidly growing community of scientists across the globe is generating a steady stream of new insights into the fundamental physics, the materials design and synthesis, the film processing and morphology, and the device science and architecture of BHJ technology. Future progress in the fabrication of high-performance BHJ cells will depend on our ability to combine aspects of synthetic and physical chemistry, condensed matter physics, and materials science. In this Account, we use a combination of characterization tools to tie together recent advances in BHJ morphology characterization, device photophysics, and thin-film solution processing, illustrating how to identify the limiting factors in solar cell performance. We also highlight how new processing methods, which control both the BHJ phase separation and the internal order of the components, can be implemented to increase the power conversion efficiency (PCE). The failure of many innovative materials to achieve high performance in BHJ solar cell devices has been blamed on "poor morphology" without significant characterization of either the structure of the phase-separated morphology or the nature of the charge carrier recombination. We demonstrate how properly controlling the "nanomorphology", which is critically dependent on minute experimental details at every step, from synthesis to device construction, provides a clear path to >10% PCE BHJ cells, which can be fabricated at a fraction of the cost of conventional solar cells.

Molecular understanding of organic solar cells: the challenges

Our objective in this Account is 3-fold. First, we provide an overview of the optical and electronic processes that take place in a solid-state organic solar cell, which we define as a cell in which the semiconducting materials between the electrodes are organic, be them polymers, oligomers, or small molecules; this discussion is also meant to set the conceptual framework in which many of the contributions to this Special Issue on Photovoltaics can be viewed. We successively turn our attention to (i) optical absorption and exciton formation, (ii) exciton migration to the donor-acceptor interface, (iii) exciton dissociation into charge carriers, resulting in the appearance of holes in the donor and electrons in the acceptor, (iv) charge-carrier mobility, and (v) charge collection at the electrodes. For each of these processes, we also describe the theoretical challenges that need to be overcome to gain a comprehensive understanding at the molecular level. Finally, we highlight recent theoretical advances, in particular regarding the determination of the energetics and dynamics at organic-organic interfaces, and underline that the right balance needs to be found for the optimization of material parameters that often result in opposite effects on the photovoltaic performance.

Structural control of Au and Au–Pd nanoparticles by selecting capping ligands with varied electronic and steric effects

Weakly interacting ligands including three Gemini surfactants, didodecyldimethylammonium bromide (DDAB), and amines (RNH2, R2NH, and R3N) were used to prepare Au nanoparticles (NPs). Aqueous Au NPs capped with DDAB and Gemini surfactants showed similar sizes (3–4 nm), whereas toluene-based NPs stabilized with DDAB, amines, and their mixtures range from 2.5 to 9.3 nm. Ligand effect on Au–Pd NP structure was also studied with EXAFS. These findings were consistently accounted for by considering the ligand’s electronic/steric effects and mixed ligands coadsorption, and suggest useful ways to control NP structure by manipulating the two effects and using mixed capping ligands.

Electrohydrodynamics: A facile technique to fabricate drug delivery systems

Electrospinning and electrospraying are facile electrohydrodynamic fabrication methods that can generate drug delivery systems (DDS) through a one-step process. The nanostructured fiber and particle morphologies produced by these techniques offer tunable release kinetics applicable to diverse biomedical applications. Coaxial electrospinning/electrospraying, a relatively new technique of fabricating core-shell fibers/particles have added to the versatility of these DDS by affording a near zero-order drug release kinetics, dampening of burst release, and applicability to a wider range of bioactive agents. Controllable electrospinning/spraying of fibers and particles and subsequent drug release from these chiefly polymeric vehicles depends on well-defined solution and process parameters. The additional drug delivery capability from electrospun fibers can further enhance the material's functionality in tissue engineering applications. This review discusses the state-of-the-art of using electrohydrodynamic technique to generate nanofiber/particles as drug delivery devices.

Electrospinning of polysaccharides for regenerative medicine

Electrospinning techniques enable the production of continuous fibers with dimensions on the scale of nanometers from a wide range of natural and synthetic polymers. The number of recent studies regarding electrospun polysaccharides and their derivatives, which are potentially useful for regenerative medicine, is increasing dramatically. However, difficulties regarding the processibility of the polysaccharides (e.g., poor solubility and high surface tension) have limited their application. In this review, we summarize the characteristics of various polysaccharides such as alginate, cellulose, chitin, chitosan, hyaluronic acid, starch, dextran, and heparin, which are either currently being used or have potential to be used for electrospinning. The recent progress of nanofiber matrices electrospun from polysaccharides and their biomedical applications in tissue engineering, wound dressings, drug delivery, and enzyme immobilization are discussed.

Phase inversion in polylactide/soybean oil blends compatibilized by poly(isoprene-b-lactide) block copolymers

Renewable composites were prepared by melt blending of polylactide and soybean oil. The blend morphology was tuned by the addition of poly(isoprene-b-lactide) block copolymers. Due to the extreme difference in the viscosities of soybean oil and polylactide, a critical block copolymer composition was found to induce a phase inversion point at which the minor soybean oil phase became the matrix surrounding polylactide particles. This transition was due to the thermodynamic interactions between the block copolymer and the two phases and shear forces acting on the mixture during blending. The size of the soybean oil droplets in the polylactide matrix was also highly dependent on the block copolymer composition. In binary polylactide/soybean oil blends, there was a limiting concentration of soybean oil that could be incorporated into the polylactide matrix (6% of the total blend weight), which could be increased up to 20% by the addition of block copolymers.

Synthesis of polycaprolactone: a review

Polycaprolactone (PCL) is an important polymer due to its mechanical properties, miscibility with a large range of other polymers and biodegradability. Two main pathways to produce polycaprolactone have been described in the literature: the polycondensation of a hydroxycarboxylic acid: 6-hydroxyhexanoic acid, and the ring-opening polymerisation (ROP) of a lactone: epsilon-caprolactone (epsilon-CL). This critical review summarises the different conditions which have been described to synthesise PCL, and gives a broad overview of the different catalytic systems that were used (enzymatic, organic and metal catalyst systems). A surprising variety of catalytic systems have been studied, touching on virtually every section of the periodic table. A detailed list of reaction conditions and catalysts/initiators is given and reaction mechanisms are presented where known. Emphasis is put on the ROP pathway due to its prevalence in the literature and the superior polymer that is obtained. In addition, ineffective systems that have been tried to catalyse the production of PCL are included in the electronic supplementary information for completeness (141 references).

Biofunctionalized magnetic hydrogel nanospheres of magnetite and kappa-carrageenan

Magnetic hydrogel kappa-carrageenan nanospheres were successfully prepared via water-in-oil (w/o) microemulsions combined with thermally induced gelation of the polysaccharide. The size of the nanospheres (an average diameter of about 50 and 75 nm) was modulated by varying the concentration of surfactant. The nanospheres contained superparamagnetic magnetite nanoparticles (average diameter 8 nm), previously prepared by co-precipitation within the biopolymer. Carboxyl groups, at a concentration of about 4 mmol g(-1), were successfully grafted at the surface of these magnetic nanospheres via carboxymethylation of the kappa-carrageenan. The carboxylated nanospheres were shown to be thermo-sensitive in the 37-45 degrees C temperature range, indicating their potential as thermally controlled delivery systems for drugs and/or magnetic particles at physiological temperatures. Finally, preliminary results have been obtained for IgG antibody conjugation of the carboxylated nanospheres and the potential of these systems for bio-applications is discussed.