Porous organic cage compounds as highly potent affinity materials for sensing by quartz crystal microbalances

Supramolecular frameworks based on [60]fullerene hexakisadducts

[60]Fullerene hexakisadducts possessing 12 carboxylic acid side chains form crystalline hydrogen-bonding frameworks in the solid state. Depending on the length of the linker between the reactive sites and the malonate units, the distance of the [60]fullerene nodes and thereby the spacing of the frameworks can be controlled and for the most elongated derivative, continuous channels are obtained within the structure. Stability, structural integrity and porosity of the material were investigated by powder X-ray diffraction, thermogravimetry and sorption measurements.

Transforming a chemically labile [2+3] imine cage into a robust carbamate cage

Turning a pH labile porous cage into a highly pH stable porous organic cage by fixation with carbamate units.

Pillar[n]arene-based supramolecular organic frameworks with high hydrocarbon storage and selectivity

The high hydrocarbon storage capacity and adsorption selectivity of two low-density, solution-processable pillar[n]arene-based SOFs have been investigated for the first time.

Exploring the gem-dimethyl effect in the formation of imine-based macrocycles and cages

A series of imine-based macrocycles and cages has been synthesized using the gem-dimethyl effect as a platform. Following this strategy, imine-based macrocyclization could be performed even at higher concentration.

Engineering Porous Organic Cage Crystals with Increased Acid Gas Resistance

Both known and new CC3-based porous organic cages are prepared and exposed to acidic SO2 in vapor and liquid conditions. Distinct differences in the stability of the CC3 cages exist depending on the chirality of the diamine linkers used. The acid catalyzed CC3 degradation mechanism is probed via in situ IR and a degradation pathway is proposed and supported with computational results. CC3 crystals synthesized with racemic mixtures of diaminocyclohexane exhibited enhanced stability compared to CC3-R and CC3-S. Confocal fluorescent microscope images reveal that the stability difference in CC3 species originates from an abundance of mesoporous grain boundaries in CC3-R and CC3-S, allowing facile access of aqueous SO2 throughout the crystal, promoting decomposition. These grain boundaries are absent from CC3 crystals made with racemic linkers.

Functional porous composites by blending with solution-processable molecular pores

We present a simple method for rendering non-porous materials porous by solution co-processing with organic cage molecules. This method can be used both for small functional molecules and for polymers, thus creating porous composites by molecular blending, rather than the more traditional approach of supporting functional molecules on pre-frabricated porous supports.

Predicting solvent effects on the structure of porous organic molecules

A computational approach for the prediction of the open, metastable, conformations of porous organic molecules in the presence of solvent is developed.

Porous Organic Cage Thin Films and Molecular-Sieving Membranes

Porous organic cage molecules are fabricated into thin films and molecular-sieving membranes. Cage molecules are solution cast on various substrates to form amorphous thin films, with the structures tuned by tailoring the cage chemistry and processing conditions. For the first time, uniform and pinhole-free microporous cage thin films are formed and demonstrated as molecular-sieving membranes for selective gas separation.

Crystal Structures of a Molecule Designed Not To Pack Tightly

Organic molecules of intrinsic microporosity (OMIMs) are structurally constructed to not pack tightly. Consequently, only weak interactions between OMIM molecules can occur, which is the reason that almost all OMIMs have been described and investigated in their amorphous states. For the same reason it is very difficult to grow single crystals of OMIMs for X-ray structural analysis. Here we describe four different polymorphs of an OMIM that was before only described in the amorphous state.

Direct On-Surface Patterning of a Crystalline Laminar Covalent Organic Framework Synthesized at Room Temperature

We report herein an efficient, fast, and simple synthesis of an imine-based covalent organic framework (COF) at room temperature (hereafter, RT-COF-1). RT-COF-1 shows a layered hexagonal structure exhibiting channels, is robust, and is porous to N2 and CO2 . The room-temperature synthesis has enabled us to fabricate and position low-cost micro- and submicropatterns of RT-COF-1 on several surfaces, including solid SiO2 substrates and flexible acetate paper, by using lithographically controlled wetting and conventional ink-jet printing.

Electrogenerated thin films of microporous polymer networks with remarkably increased electrochemical response to nitroaromatic analytes

Thin films of microporous polymer networks (MPNs) have been generated by electrochemical polymerization of a series of multifunctional carbazole-based monomers. The microporous films show high Brunauer-Emmett-Teller (BET) surface areas up to 1300 m2 g(-1) as directly measured by krypton sorption experiments. A correlation between the number of polymerizable carbazole units of the monomer and the resulting surface area is observed. Electrochemical sensing experiments with 1,3,5-trinitrobenzene as prototypical nitroaromatic analyte demonstrate an up to 180 times increased current response of MPN-modified glassy carbon electrodes in relation to the nonmodified electrode. The phenomenon probably involves intermolecular interactions between the electron-poor nitroaromatic analytes and the electron-rich, high surface area microporous deposits, with the electrochemical reduction at the MPN-modified electrodes being an adsorption-controlled process for low scan rates. We expect a high application potential of such MPN-modified electrodes for boosting the sensitivity of electrochemical sensor devices.

Self-assembled discrete molecules for sensing nitroaromatics

Efficient sensing of trace amount nitroaromatic (NAC) explosives has become a major research focus in recent time due to concerns over national security as well as their role as environment pollutants. NO2 -containing electron-deficient aromatic compounds, such as picric acid (PA), trinitrotoluene (TNT), and dinitrotoluene (DNT), are the common constituents of many commercially available chemical explosives. In this article, we have summarized our recent developments on the rational design of electron-rich self-assembled discrete molecular sensors and their efficacy in sensing nitroaromatics both in solution as well as in vapor phase. Several π-electron-rich fluorescent metallacycles (squares, rectangles, and tweezers/pincers) and metallacages (trigonal and tetragonal prisms) have been synthesized by means of metal-ligand coordination-bonding interactions, with enough internal space to accommodate electron-deficient nitroaromatics at the molecular level by multiple supramolecular interactions. Such interactions subsequently result in the detectable fluorescence quenching of sensors even in the presence of trace quantities of nitroaromatics. The fascinating sensing characteristics of molecular architectures discussed in this article may enable future development of improved sensors for nitroaromatic explosives.

Dynamic flow synthesis of porous organic cages

Two imine-based porous organic cages were successfully synthesised in continuous flow. The same flow reactor was then used to scramble the constituents of these two cages in differing ratios to form cage mixtures.

Adsorption of fluorinated anesthetics within the pores of a molecular crystal

Commonly used inhalation anesthetics—enflurane, isoflurane, sevoflurane, halothane, and methoxyflurane—are adsorbed within the pores of a porous fluorinated molecular crystal to the tune of up to 73.4(±0.2)% by weight.

Potent affinity material for tracing acetone and related analytes based on molecular recognition by halogen bonds

A helping third hand converts halogen bonds into a superior recognition tool.

Synthesis of a rigid C3v -symmetric tris-salicylaldehyde as a precursor for a highly porous molecular cube

The development of a synthetic approach to a C3v -symmetric tris-salicylaldehyde based on triptycene is presented. The tris-salicylaldehyde is a versatile precursor for porous molecular materials, as demonstrated in the [4+4] condensation reaction with a triptycene triamine to form a molecular shape-persistent porous cube. The amorphous material of the molecular porous cube shows a very high surface area of 1014 m(2)  g(-1) (BET model) and a high uptake of CO2 (18.2 wt % at 273 K and 1 bar). Furthermore, during the multistep synthesis of the tris-salicylaldehyde precursor, a relatively rare (twofold) addition of the aryne to the anthracene in the 1,4- and 1,4,5,8-positions have been found during a Diels-Alder reaction, as proven by X-ray structure analysis.

Separation of rare gases and chiral molecules by selective binding in porous organic cages

The separation of molecules with similar size and shape is an important technological challenge. For example, rare gases can pose either an economic opportunity or an environmental hazard and there is a need to separate these spherical molecules selectively at low concentrations in air. Likewise, chiral molecules are important building blocks for pharmaceuticals, but chiral enantiomers, by definition, have identical size and shape, and their separation can be challenging. Here we show that a porous organic cage molecule has unprecedented performance in the solid state for the separation of rare gases, such as krypton and xenon. The selectivity arises from a precise size match between the rare gas and the organic cage cavity, as predicted by molecular simulations. Breakthrough experiments demonstrate real practical potential for the separation of krypton, xenon and radon from air at concentrations of only a few parts per million. We also demonstrate selective binding of chiral organic molecules such as 1-phenylethanol, suggesting applications in enantioselective separation.

Thin film fabricated from solution-dispersible porous hyperbranched conjugated polymer nanoparticles without surfactants

Porous hyperbranched conjugated polymer nanoparticles with an average particle size of 20-60 nm and a specific surface area of 225 m(2) g(-1) have been prepared through Suzuki polymerization in a miniemulsion, which could be stably dispersed in common organic solvents after complete removal of surfactants. Furthermore, a simple spin-coating method for the preparation of homogeneous transparent thin films of the nanoparticle has been developed. Bright blue emission of the porous nanoparticle films could be reversibly quenched by nitroaromatics with enhanced sensitivity compared to dense films of the linear conjugated polymer analogue.

Dynamic covalent assembly of tribenzotriquinacenes into molecular cubes

Molecular cubes constructed from catechol-functionalized tribenzotriquinacenes and 1,4-phenylene diboronic acids were synthesized in a one-pot procedure by crosslinking 20 individual components through a dynamic covalent approach.