Articular area responses to mechanical loading: effects of exercise, age, and skeletal location

Morphology of sustentaculum tali: Biomechanical importance and correlation with angular dimensions of the talus

SUMMARY OF BACKGROUND DATA

The talus and the calcaneus share the bulk of load transmitted from the leg to the skeleton of the foot. The present study analyses the inter-relationship between the superior articular surface and the angular dimensions of the talus with the morphology of the sustentaculum tali.

OBJECTIVE

Identification of possible relationships between different angular parameters of the talus morphology and the sustentaculum tali in context of load transmission through the foot.

METHODS

One articular surface and three angular parameters at the junction of the head and the body were measured from dried human talar bones. Corresponding calcaneal samples were measured for four dimensions at the sustentaculum tali. Correlation and regression statistical values between parameters were worked out and analysed.

RESULTS

Several parameters within the talus demonstrated significant correlations amongst themselves. The neck vertical angle showed a strong correlation with the articulating surface area below the head of the talus.

CONCLUSIONS

The inter-relationship between articular and angular parameters within the talus demonstrates strong correlation for certain parameters. Data presented in the study may be helpful to adjust calcaneal and talar screw placement techniques, prosthesis designing and bio-mechanical studies at this important region.

Cross sectional properties of the human radial tuberosity

This study examines the cross sectional shape and biomechanical properties of the radial bone shaft at mid-radial tuberosity (RT) musculoskeletal marker (MSM). This information will provide insight into factors affecting bone modelling at muscle insertions. Radial shaft cross-sectional properties at radial tuberosity area (RTA) have not been previously studied. The material consists of 54 male skeletons derived from autopsies performed during the 1920s and 1930s and housed at the Central Natural History Museum, University of Helsinki. The age, sex and occupation of these individuals are known. We applied a pQCT (peripheral quantitative computed tomography) scan on the mid-site of the radial tuberosity to investigate the cross-sectional shape, the bone mineral density (BMD) and biomechanical properties. Our results indicate that bone modelling does not produce increased wall thickness or BMD at the RT site. Additionally we noticed that aging and physical activity affect the biomechanics of the RT and that the bone distribution at mid-RT is adapted to accommodate the biceps brachii muscle pull. We also found a clear association between RTA and biomechanical properties of mid-RT cross section.

Human evolution and osteoporosis-related spinal fractures

The field of evolutionary medicine examines the possibility that some diseases are the result of trade-offs made in human evolution. Spinal fractures are the most common osteoporosis-related fracture in humans, but are not observed in apes, even in cases of severe osteopenia. In humans, the development of osteoporosis is influenced by peak bone mass and strength in early adulthood as well as age-related bone loss. Here, we examine the structural differences in the vertebral bodies (the portion of the vertebra most commonly involved in osteoporosis-related fractures) between humans and apes before age-related bone loss occurs. Vertebrae from young adult humans and chimpanzees, gorillas, orangutans, and gibbons (T8 vertebrae, n = 8–14 per species, male and female, humans: 20–40 years of age) were examined to determine bone strength (using finite element models), bone morphology (external shape), and trabecular microarchitecture (micro-computed tomography). The vertebrae of young adult humans are not as strong as those from apes after accounting for body mass (p<0.01). Human vertebrae are larger in size (volume, cross-sectional area, height) than in apes with a similar body mass. Young adult human vertebrae have significantly lower trabecular bone volume fraction (0.26±0.04 in humans and 0.37±0.07 in apes, mean ± SD, p<0.01) and thinner vertebral shells than apes (after accounting for body mass, p<0.01). Since human vertebrae are more porous and weaker than those in apes in young adulthood (after accounting for bone mass), even modest amounts of age-related bone loss may lead to vertebral fracture in humans, while in apes, larger amounts of bone loss would be required before a vertebral fracture becomes likely. We present arguments that differences in vertebral bone size and shape associated with reduced bone strength in humans is linked to evolutionary adaptations associated with bipedalism.

Bilateral asymmetry of the humerus during growth and development

The development of handedness throughout growth can be investigated by using bilateral asymmetry of the humerus as a proxy for this trait. A large skeletal sample of nonadults from English archaeological sites was examined using standard metric techniques to assess when right-sided asymmetry first appears in the human skeleton. Results of this work indicate a change in directional asymmetry during growth and development, with infants and young children exhibiting no significant asymmetry and older children and adolescents demonstrating right-sidedness. This trend is consistent with what has been observed in previous studies of upper limb asymmetry in skeletal material and behaviorally in living children, adding further strength to the premise that biomechanical forces strongly influence bilateral asymmetry in the upper limb bones. Variability in the magnitude of asymmetry between different features of the humerus was also noted. This characteristic can be explained by differing degrees of genetic canalization, with length and articular dimensions being more strongly canalized than diaphyseal properties.

Study of femoral torsion during prenatal growth: interpretations associated with the effects of intrauterine pressure

The developing fetus is protected from external environmental influences by maternal tissues. However, these structures have a limited elasticity, such that the fetus must grow in a confined space, constraining its size at the end of pregnancy. Can these constraints modify the morphology of the fetal skeleton? The intensity of these constraints increases between 5 months and birth, making it the most appropriate period to address this question. A sample of 89 fetal femora was analyzed, and results provide evidence that during this period, the torsion of the femoral shaft (quantified by means of a new three-dimensional method) increases gradually. Two explanations were considered: this increase could signal effects of constraints induced by the intrauterine cavity, developmental patterning, or some combination of these two. Different arguments tend to support the biomechanical explanation, rather than a programming pattern formation. Indeed, the identification of the femur as a first degree lever, created by the hyperflexion of the fetal lower limbs on the pelvis, could explain the increase in femoral shaft torsion during prenatal life. A comparison with femora of infants is in accordance with this mechanical interpretation, which is possible through bone modeling/remodeling. Although genetic and epigenetic mechanisms may regulate timing of fetal development, our data suggest that at birth, the fetal skeleton also has an intrauterine mechanical history through adaptive bone plasticity.

Inter- and intra-specific scaling of articular surface areas in the hominoid talus

The morphology of postcranial articular surfaces is expected to reflect their weight-bearing properties, as well as the stability and mobility of the articulations to which they contribute. Previous studies have mainly confirmed earlier predictions of isometric scaling between articular surface areas and body mass; the exception to this is 'male-type', convex articular surface areas, which may scale allometrically due to differences in locomotor strategies within the analysed samples. In the present study, we used new surface scanning technology to quantify more accurately articular surface areas and to test those predictions within the talus of hominoid primates, including modern humans. Our results, contrary to predictions, suggest that there are no generalised rules of articular scaling within the talus of hominoids. Instead, we suggest that articular scaling patterns are highly context-specific, depending on the role of each articulation during locomotion, as well as taxon- and sex-specific differences in locomotion and ontogenetic growth trajectories within any given sample. While this may prove problematic for inferring body mass based on articular surface area, it also offers new opportunities of gaining substantial insights into the locomotor patterns of extinct species.

Serrated flippers and directional asymmetry in the appendicular skeleton of the Commerson's dolphin (Cephalorhynchus commersonii)

Presence of saw-toothed structures (serrations) on the leading edge of the flippers in the Commerson's dolphin and their relation with directional asymmetry in the appendicular skeleton were investigated in individuals from the Tierra del Fuego population, Argentina. Serrations were more frequent in the left flipper than in the right (P < 0.001) and in males than in females (P < 0.001). Serration length was significantly longer in the left flipper than in the right (P = 0.023), in males than in females (P = 0.004), and in older individuals than young (P < 0.001). The length of the radius (P = 0.028) and the length (P = 0.004), width (P < 0.001) and weight (P = 0.006) of the scapula showed significant directional asymmetry favoring the right side, whereas the length (P < 0.001) and width (P < 0.001) of the second digit favored the left side. The asymmetry appears to be innate in the species but is likely to be enhanced by differential mechanical stress between flippers as a result of lateralized behavior. We propose that the left flipper would be more flexible and preferably used in sensory or tactile activities that involve the serrations, whereas the right flipper would be more responsible for actions requiring a larger muscular exercise, possibly related to the maintenance of stability during swimming.

Body mass and stature estimation based on the first metatarsal in humans

Archaeological assemblages often lack the complete long bones needed to estimate stature and body mass. The most accurate estimates of body mass and stature are produced using femoral head diameter and femur length. Foot bones including the first metatarsal preserve relatively well in a range of archaeological contexts. In this article we present regression equations using the first metatarsal to estimate femoral head diameter, femoral length, and body mass in a diverse human sample. The skeletal sample comprised 87 individuals (Andamanese, Australasians, Africans, Native Americans, and British). Results show that all first metatarsal measurements correlate moderately to highly (r = 0.62-0.91) with femoral head diameter and length. The proximal articular dorsoplantar diameter is the best single measurement to predict both femoral dimensions. Percent standard errors of the estimate are below 5%. Equations using two metatarsal measurements show a small increase in accuracy. Direct estimations of body mass (calculated from measured femoral head diameter using previously published equations) have an error of just over 7%. No direct stature estimation equations were derived due to the varied linear body proportions represented in the sample. The equations were tested on a sample of 35 individuals from Christ Church Spitalfields. Percentage differences in estimated and measured femoral head diameter and length were less than 1%. This study demonstrates that it is feasible to use the first metatarsal in the estimation of body mass and stature. The equations presented here are particularly useful for assemblages where the long bones are either missing or fragmented, and enable estimation of these fundamental population parameters in poorly preserved assemblages.

Effect of exercise on thicknesses of mature hyaline cartilage, calcified cartilage, and subchondral bone of equine tarsi

OBJECTIVE-To investigate effects of exercise on hyaline cartilage (HC), calcified cartilage (CC), and subchondral bone (SCB) thickness patterns of equine tarsi. SAMPLE POPULATION-30 tarsi from cadavers of horses with known exercise history. PROCEDURES-Tarsi were assigned to 3 groups according to known exercise history as follows: pasture exercise only (PE tarsi), low-intensity general-purpose riding exercise (LE tarsi), and high-intensity elite competition riding exercise (EE tarsi). Osteochondral tissue from distal tarsal joints underwent histologic preparation. Hyaline cartilage, CC, and SCB thickness were measured at standard sites at medial, midline, and lateral locations across joints with a histomorphometric technique. RESULTS-HC, CC, and SCB thickness were significantly greater at all sites in EE tarsi, compared with PE tarsi; this was also true when LE tarsi were compared with PE tarsi. At specific sites, HC, CC, and SCB were significantly thicker in EE tarsi, compared with LE tarsi. Along the articular surface of the proximal aspect of the third metatarsal bone, SCB was thickest in EE tarsi and thinnest in LE tarsi; increases were greatest at sites previously reported to undergo peak strains and osteochondral damage. CONCLUSIONS AND CLINICAL RELEVANCE-Increased exercise was associated with increased HC, CC, and SCB thickness in mature horses. At sites that undergo high compressive strains, with a reported predisposition to osteoarthritic change, there was increased CC and SCB thickness. These results may provide insight into the interaction between adaptive response to exercise and pathological change.

Patterns in ontogeny of human trabecular bone from SunWatch Village in the Prehistoric Ohio Valley: general features of microarchitectural change

Although adult skeletal morphological variation is best understood within the framework of age-related processes, relatively little research has been directed towards the structure of and variation in trabecular bone during ontogeny. We report here new quantitative and structural data on trabecular bone microarchitecture in the proximal tibia during growth and development, as demonstrated in a subadult archaeological skeletal sample from the Late Prehistoric Ohio Valley. These data characterize the temporal sequence and variation in trabecular bone structure and structural parameters during ontogeny as related to the acquisition of normal functional activities and changing body mass. The skeletal sample from the Fort Ancient Period site of SunWatch Village is composed of 33 subadult and three young adult proximal tibiae. Nondestructive microCT scanning of the proximal metaphyseal and epiphyseal tibia captures the microarchitectural trabecular structure, allowing quantitative structural analyses measuring bone volume fraction, degree of anisotropy, trabecular thickness, and trabecular number. The microCT resolution effects on structural parameters were analyzed. Bone volume fraction and degree of anisotropy are highest at birth, decreasing to low values at 1 year of age, and then gradually increasing to the adult range around 6-8 years of age. Trabecular number is highest at birth and lowest at skeletal maturity; trabecular thickness is lowest at birth and highest at skeletal maturity. The results of this study highlight the dynamic sequential relationships between growth/development, general functional activities, and trabecular distribution and architecture, providing a reference for comparative studies.

Medial-to-lateral ratio of tibiofemoral subchondral bone area is adapted to alignment and mechanical load

Malalignment is known to affect the medial-to-lateral load distribution in the tibiofemoral joint. In this longitudinal study, we test the hypothesis that subchondral bone surface areas functionally adapt to the load distribution in malaligned knees. Alignment (hip-knee-ankle angle) was measured from full limb films in 174 participants with knee osteoarthritis. Coronal magnetic resonance images were acquired at baseline and 26.6 +/- 5.4 months later. The subchondral bone surface area of the weight-bearing tibiofemoral cartilages was segmented, with readers blinded to the order of acquisition. The size of the subchondral bone surface areas was computed after triangulation by proprietary software. The hip-knee-ankle angle showed a significant correlation with the tibial (r (2) = 0.25, P < 0.0001) and femoral (r (2) = 0.07, P < 0.001) ratio of medial-to-lateral subchondral bone surface area. In the tibia, the ratio was significantly different between varus (1.28:1), neutral (1.18:1), and valgus (1.13:1) knees (analysis of variance [ANOVA]; P < 0.00001). Similar observations were made in the weight-bearing femur (0.94:1 in neutral, 0.97.1 in varus, 0.91:1 in valgus knees; ANOVA P = 0.018). The annualized longitudinal increase in subchondral bone surface area was significant (P < 0.05) in the medial tibia (+0.13%), medial femur (+0.26%), and lateral tibia (+0.19%). In the medial femur, the change between baseline and follow-up was significantly different (ANOVA; P = 0.020) between neutral, varus, and valgus knees, with the increase in surface area being significantly greater (P = 0.019) in varus than in neutral knees. Tibiofemoral subchondral bone surface areas are shown to be functionally adapted to the medial-to-lateral load distribution. The longitudinal findings indicate that this adaptational process may continue to take place at advanced age.

Anterior-posterior bending strength at the tibial shaft increases with physical activity in boys: evidence for non-uniform geometric adaptation

We investigated bone structural adaptations to a 16-month school-based physical activity intervention in 202 young boys using a novel analytical method for peripheral quantitative computed tomography scans of the tibial mid-shaft. Our intervention effectively increased bone bending strength in the anterior-posterior plane as estimated with the maximum second moment of area (I(max)).

INTRODUCTION

We previously reported positive effects of a physical activity intervention on peripheral quantitative computed tomography (pQCT)-derived bone strength at the tibial mid-shaft in young boys. The present study further explored structural adaptations to the intervention using a novel method for pQCT analysis.

METHODS

Participants were 202 boys (aged 9-11 years) from 10 schools randomly assigned to control (CON, 63 boys) and intervention (INT, 139 boys) groups. INT boys participated in 60 min/week of classroom physical activity, including a bone-loading program. We used ImageJ to process pQCT images of the tibial mid-shaft and determine the second moments of area (I(max), I(min)) and cortical area (CoA) and thickness (CTh) by quadrant (anterior, medial, lateral, posterior). We defined quadrants according to pixel coordinates about the centroid. We used mixed linear models to compare change in bone outcomes between groups.

RESULTS

The INT boys had a 3% greater gain in I(max) than the CON boys (p = 0.04) and tended to have a greater gain in I(min) ( approximately 2%, NS). Associated with the greater gain in I(max) was a slightly greater (NS) gain (1-1.4%) in CoA and CTh in the anterior, medial, and posterior (but not lateral) quadrants.

CONCLUSION

Our results suggest regional variation in bone adaptation consistent with patterns of bone formation induced by anterior-posterior bending loads.

Bone modeling response to voluntary exercise in the hindlimb of mice

The functional adaptation of juvenile mammalian limb bone to mechanical loading is necessary to maintain bone strength. Diaphyseal size and shape are modified during growth through the process of bone modeling. Although bone modeling is a well-documented response to increased mechanical stress on growing diaphyseal bone, the effect of proximodistal location on bone modeling remains unclear. Distal limb elements in cursorial mammals are longer and thinner, most likely to conserve energy during locomotion because they require less energy to move. Therefore, distal elements are hypothesized to experience greater mechanical loading during locomotion and may be expected to exhibit a greater modeling response to exercise. In this study, histomorphometric comparisons are made between femora and tibiae of mice treated with voluntary exercise and a control group (N = 20). We find that femora of exercised mice exhibit both greater bone growth rates and growth areas than do controls (P < 0.05). The femora of exercised mice also have significantly greater cortical area, bending rigidity, and torsional rigidity (P < 0.05), although bending and torsional rigidity are comparable when standardized by bone length. Histomorphometric and cross-section geometric properties of the tibial midshaft of exercised and control mice did not differ significantly, although tibial length was significantly greater in exercised mice (P < 0.05). Femora of exercised mice were able to adapt to increased mechanical loading through increases in compressive, bending, and torsional rigidity. No such adaptations were found in the tibia. It is unclear if this is a biomechanical adaptation to greater stress in proximal elements or if distal elements are ontogenetically constrained in a tradeoff of bone strength of distal elements for bioenergetic efficiency during locomotion.

Mobility in Central European Late Eneolithic and Early Bronze Age: femoral cross-sectional geometry

Some scholars explain the absence of settlements in the Bohemian and Moravian Late Eneolithic (Corded Ware archaeological culture) as a consequence of pastoral subsistence with a high degree of mobility. However, recent archaeological studies argued that the archaeological record of the Late Eneolithic in Central Europe exhibits evidence for sedentary subsistence with mixed agriculture, similar to the subsequent Early Bronze Age. Because the archaeological data do not allow us to address unambiguously the mobility pattern in these periods, we used cross-sectional analysis of the femoral midshaft to test mobility directly on the human skeletal record. The results of femoral midshaft geometry do not support a high degree of mobility in the Late Eneolithic in Central Europe. This conclusion is supported mainly by no significant differences in male groups between the Late Eneolithic and Early Bronze Age in mechanical robusticity and shape of the femoral midshaft, although Corded Ware males still exhibit the highest absolute mean values of the diaphyseal shape (I(A-P)/I(M-L)) ratio and antero-posterior second moment of area. However, Late Eneolithic females have significantly higher torsional and overall bending rigidity because of a significantly higher medio-lateral second moment of area. This finding cannot be directly linked with a higher degree of long-distance mobility for these females. A significant difference was also found in overall decrease of size parameters of the femoral midshaft cross section for one of the Early Bronze Age samples, the Wieselburger females. Since the decrease of size and mechanical robusticity for Wieselburger females does not correspond with the parameters of Early Bronze Age females, we can expect a mosaic pattern of changes during the Late Eneolithic and Early Bronze Age period, instead of a simple unidirectional (diachronic) change of the mechanical environment.

Femoral/humeral strength in early African Homo erectus

Lower-to-upper limb-bone proportions give valuable clues to locomotor behavior in fossil taxa. However, to date only external linear dimensions have been included in such analyses of early hominins. In this study, cross-sectional measures of femoral and humeral diaphyseal strength are determined for the two most complete early Homo erectus (or ergaster) associated skeletons--the juvenile KNM-WT 15000 and the adult KNM-ER 1808. Modern comparative samples include an adult human skeletal sample representative of diverse body shapes, a human longitudinal growth series, and an adult chimpanzee sample. When compared to appropriately age-matched samples, both H. erectus specimens fall very close to modern human mean proportions and far from chimpanzee proportions (which do not overlap with those of humans). This implies very similar mechanical load-sharing between the lower and upper limbs, and by implication, similar locomotor behavior in early H. erectus and modern humans. Thus, by the earliest Pleistocene (1.7 Ma), completely modern patterns of bipedal behavior were fully established in at least one early hominin taxon.

The shape of the hominoid proximal femur: a geometric morphometric analysis

As part of the hip joint, the proximal femur is an integral locomotor component. Although a link between locomotion and the morphology of some aspects of the proximal femur has been identified, inclusive shapes of this element have not been compared among behaviourally heterogeneous hominoids. Previous analyses have partitioned complex proximal femoral morphology into discrete features (e.g. head, neck, greater trochanter) to facilitate conventional linear measurements. In this study, three-dimensional geometric morphometrics are used to examine the shape of the proximal femur in hominoids to determine whether femoral shape co-varies with locomotor category. Fourteen landmarks are recorded on adult femora of Homo, Pan, Gorilla, Pongo and Hylobates. Generalized Procrustes analysis (GPA) is used to adjust for position, orientation and scale among landmark configurations. Principal components analysis is used to collapse and compare variation in residuals from GPA, and thin-plate spline analysis is used to visualize shape change among taxa. The results indicate that knucklewalking African apes are similar to one another in femoral shape, whereas the more suspensory Asian apes diverge from the African ape pattern. The shape of the human and orangutan proximal femur converge, a result that is best explained in terms of the distinct requirements for locomotion in each group. These findings suggest that the shape of the proximal femur is brought about primarily by locomotor behaviour.

Who's afraid of the big bad Wolff?: "Wolff's law" and bone functional adaptation

"Wolff's law" is a concept that has sometimes been misrepresented, and frequently misunderstood, in the anthropological literature. Although it was originally formulated in a strict mathematical sense that has since been discredited, the more general concept of "bone functional adaptation" to mechanical loading (a designation that should probably replace "Wolff's law") is supported by much experimental and observational data. Objections raised to earlier studies of bone functional adaptation have largely been addressed by more recent and better-controlled studies. While the bone morphological response to mechanical strains is reduced in adults relative to juveniles, claims that adult morphology reflects only juvenile loadings are greatly exaggerated. Similarly, while there are important genetic influences on bone development and on the nature of bone's response to mechanical loading, variations in loadings themselves are equally if not more important in determining variations in morphology, especially in comparisons between closely related individuals or species. The correspondence between bone strain patterns and bone structure is variable, depending on skeletal location and the general mechanical environment (e.g., distal vs. proximal limb elements, cursorial vs. noncursorial animals), so that mechanical/behavioral inferences based on structure alone should be limited to corresponding skeletal regions and animals with similar basic mechanical designs. Within such comparisons, traditional geometric parameters (such as second moments of area and section moduli) still give the best available estimates of in vivo mechanical competence. Thus, when employed with appropriate caution, these features may be used to reconstruct mechanical loadings and behavioral differences within and between past populations.

Body size prediction from juvenile skeletal remains

There are currently no methods for predicting body mass from juvenile skeletal remains and only a very limited number for predicting stature. In this study, stature and body mass prediction equations are generated for each year from 1 to 17 years of age using a subset of the Denver Growth Study sample, followed longitudinally (n = 20 individuals, 340 observations). Radiographic measurements of femoral distal metaphyseal and head breadth are used to predict body mass and long bone lengths are used to predict stature. In addition, pelvic bi-iliac breadth and long bone lengths are used to predict body mass in older adolescents. Relative prediction errors are equal to or smaller than those associated with similar adult estimation formulae. Body proportions change continuously throughout growth, necessitating age-specific formulae. Adult formulae overestimate stature and body mass in younger juveniles, but work well in 17-year-olds from the sample, indicating that in terms of body proportions they are representative of the general population. To illustrate use of the techniques, they are applied to the juvenile Homo erectus (ergaster) KNM-WT 15000 skeleton. New body mass and stature estimates for this specimen are similar to previous estimates derived using other methods. Body mass estimates range from 50 to 53 kg, and stature was probably slightly under 157 cm, although a precise stature estimate is difficult to determine due to differences in linear body proportions between KNM-WT 15000 and the Denver reference sample.

Human manipulative behavior in the Central European Late Eneolithic and Early Bronze Age: Humeral bilateral asymmetry

It is assumed that the transition from the Late Eneolithic to the Early Bronze Age in Central Europe was associated with substantial changes in subsistence and the perception of gender differences. However, the archeological record itself does not entirely support this model. Alternatively, this transition may be interpreted as a continuous process. We used asymmetry in external dimensions, and asymmetry in size and distribution of cortical tissue of humeri to elucidate the nature of this transition with respect to differences in manipulative behavior. The total sample of 67 individuals representing five archaeological cultures was used. The results indicate that the pattern of asymmetry of the humeral external measurements and the cross-sectional parameters taken at 35% of humeral biomechanical length remain stable during the Late Eneolithic and Early Bronze Age. However, females of both periods show fluctuating asymmetry for all of the cross-sectional parameters, but directional asymmetry for biomechanical length. Males are nonsignificantly shifted from the line of equivalence for biomechanical length, but exhibit directional asymmetry for the cortical area and polar moment of area. Only distal articular breadth yields fluctuating asymmetry for both females and males in both periods. Thus, the transition from the Late Eneolithic to the Early Bronze Age can be seen as a continuous process that probably affected only a limited part of human activities. We interpret the differences between females and males of both periods as evidence of gender-specific activities; males might have been associated with extra-domestic agricultural labor that resulted in asymmetrical manipulative loading and females with domestic labor with symmetrical manipulative loading in both periods.

Sex determination from hand and foot bone lengths

Numerous studies have addressed sex estimation from the hands and feet with varying results. These studies have utilized multiple measurements to determine sex from the hands and feet, including measures of robusticity (e.g., base width and midshaft diameter). However, robusticity measurements are affected by activity, which can disguise underlying patterns of sexual dimorphism. The purpose of this study is to investigate the utility of length measurements of the hands and feet to estimate sex. The sample consists of white females (n=123) and males (n=136) from the Terry Collection. Discriminant function analysis was used to classify individuals by sex. The left hand outperformed both the right hand and foot producing correct classification rates exceeding 80%. Surprisingly, the phalanges were better sex discriminators than either the metacarpals or metatarsals. This study suggests that length measures are more appropriate than robusticity measures for sex estimation.

Size and shape variation in Australopithecus afarensis proximal femora

The degree of size and shape variation in the A. afarensis fossil sample has been interpreted in a variety of ways. Size variation has been described as exceeding that of extant hominoids, similar to that of strongly sexually dimorphic hominoids, and best matched to modern humans. The degree of shape variation has been characterized both as great and negligible. Recent fieldwork has increased the proximal femoral sample, providing new data with which to examine variation. The proximal femur of A. afarensis is analyzed in a comparative framework in order to gauge the magnitude of size and shape variation in this element. Seven of the best-preserved A. afarensis proximal femora contribute to the analysis (A.L. 128-1, A.L. 152-2, A.L. 211-1, A.L. 288-1ap, A.L. 333-3, A.L. 333-123, A.L. 827-1). Comparative samples from Pan, Pongo, Gorilla, and Homo provide context for interpreting variation among the fossils. The coefficient of variation (CV) of linear measurements is used to estimate size variation. Bootstrap resampling of CVs from extant hominoids provides distributions for comparison to A. afarensis CVs. Ratios of linear measurements provide scale-free shape variables that are used in pairwise comparisons. The Euclidean distance between pairs of A. afarensis are compared to the Euclidean distances between extant hominoid pairs. As found in some earlier analyses, size variation in A. afarensis is accommodated best in gorillas and orangutans. The magnitude of difference in shape between A. afarensis pairs is exceeded by most taxa, indicating that shape variation is not extreme. These general findings are contradicted by a few instances of excessive size and shape variation. These are uncharacteristic results and could point to temporal bias, although other alternatives are explored. The signal from the proximal femur is that size variation in A. afarensis is like that of the strongly sexually dimorphic apes, and shape variation is well within the range of most hominoids irrespective of their degree of size dimorphism.

Trabecular bone ontogeny in the human proximal femur

Ontogenetic changes in the human femur associated with the acquisition of bipedal locomotion, especially the development of the bicondylar angle, have been well documented. The purpose of this study is to quantify changes in the three-dimensional structure of trabecular bone in the human proximal femur in relation to changing functional and external loading patterns with age. High-resolution X-ray computed tomography scan data were collected for 15 juvenile femoral specimens ranging in age from prenatal to approximately nine years of age. Serial slices were collected for the entire proximal femur of each individual with voxel resolutions ranging from 0.017 to 0.046 mm depending on the size of the specimen. Spherical volumes of interest were defined within the proximal femur, and the bone volume fraction, trabecular thickness, trabecular number, and fabric anisotropy were calculated in three dimensions. Bone volume fraction, trabecular number, and degree of anisotropy decrease between the age of 6 months and 12 months, with the lowest values for these parameters occurring in individuals near 12 months of age. By age 2-3 years, the bone volume, thickness, and degree of anisotropy increase slightly, and regions in the femoral neck become more anisotropic corresponding to the thickening of the inferior cortical bone of the neck. These results suggest that trabecular structure in the proximal femur reflects the shift in external loading patterns associated with the initiation of unassisted walking in infants.

Effect of mobility on femur midshaft external shape and robusticity

This study investigates differences in femur midshaft shape, robusticity, and sexual dimorphism derived from external measurements between a broad range of prehistoric and historic North American populations with different subsistence strategies and inferred levels of mobility. The sample was divided into six groups to test whether observed femur midshaft variables follow the patterns predicted based on archaeologically and historically determined subsistence and mobility data. The results suggest significant variation in femur midshaft shape and robusticity in all populations, and that inferred mobility levels do not correspond consistently with femur midshaft structure in either males or females. Results do, however, support the prediction that sexual dimorphism is generally greater in more mobile populations.

Functional adaptation of the femoral head to voluntary exercise

The functional adaptation of limb joints during postnatal ontogeny is necessary to maintain proper joint function. Joint form is modified primarily through differential rates of articular cartilage proliferation across articular surfaces during endochondral growth. This process is hypothesized to be mechanically regulated by the magnitude and orientation of stresses in the articular cartilage. However, the adaptation of limb joint morphology to the mechanical environment is poorly understood. We investigate the effects of voluntary exercise on femoral head morphology in 7-week-old female mice of the inbred strain C57BL/6J. The mice were divided into a control group and a group treated with voluntary access to an activity wheel for the duration of the 4-week study. Histomorphometric comparisons of chondral and osseous joint tissue of the proximal femur were made between control and exercise treatment groups. We find that exercised mice have significantly thicker articular cartilage with greater chondral tissue area and cellularity. Exercised mice also exhibit significantly greater bone tissue area and longer and flatter subchondral surfaces. No significant difference is found in the curvature of the articular cartilage or the length of the chondral articular surface between groups. These data suggest that a complex mechanistic relationship exists between joint stress and joint form. Joint tissue response to loading is multifaceted, involving both size and shape changes. Our data support the hypothesis that joint growth is ontogenetically plastic. Mechanical loading significantly influences chondral and subchondral tissue proliferation to provide greater support against increased mechanical loading.

Tibio-femoral joint contact forces in sheep

Although the sheep has become a standard model for understanding the mechanical conditions that occur after injury and investigating surgical treatments such as osteochondral defect healing and ligament reconstruction, no study has yet evaluated the contact forces that occur in the sheep tibio-femoral joint in vivo. In this study, bone pins, together with reflective markers, were used to measure the 3D kinematics of three sheep hind limbs, simultaneously with the ground reaction forces during repetitions of gait trials. Joint contact forces were then calculated using inverse dynamics and optimisation techniques. Whilst average peak axial tibio-femoral contact forces of 2.1 body weight (BW) were calculated across the 3 sheep, only small medio-lateral and antero-posterior shear forces, averaging 0.7 BW, were determined. Average knee flexion angles ranging from 49 degrees to 70 degrees were observed. From the forces determined in this study, we have provided a better understanding of the mechanical loading environment that occurs in sheep. This has important implications for the interpretation of knee studies in quadrupeds and their relevance to the clinical situation.

Limb bone bilateral asymmetry: variability and commonality among modern humans

Humans demonstrate species-wide bilateral asymmetry in long bone dimensions. Previous studies have documented greater right-biases in upper limb bone dimensions--especially in length and diaphyseal breadth--as well as more asymmetry in the upper limb when compared with the lower limb. Some studies have reported left-bias in lower limb bone dimensions, which, combined with the contralateral asymmetry in upper limbs, has been termed "crossed symmetry." The examination of sexual dimorphism and population variation in asymmetry has been limited. This study re-examines these topics in a large, geographically and temporally diverse sample of 780 Holocene adult humans. Fourteen bilateral measures were taken, including maximum lengths, articular and peri-articular breadths, and diaphyseal breadths of the femur, tibia, humerus, and radius. Dimensions were converted into percentage directional (%DA) and absolute (%AA) asymmetries. Results reveal that average diaphyseal breadths in both the upper and lower limbs have the greatest absolute and directional asymmetry among all populations, with lower asymmetry evident in maximum lengths or articular dimensions. Upper limb bones demonstrate a systematic right-bias in all dimensions, while lower limb elements have biases closer to zero %DA, but with slight left-bias in diaphyseal breadths and femoral length. Crossed symmetry exists within individuals between similar dimensions of the upper and lower limbs. Females have more asymmetric and right-biased upper limb maximum lengths, while males have greater humeral diaphyseal and head breadth %DAs. The lower limb demonstrates little sexual dimorphism in asymmetry. Industrial groups exhibit relatively less asymmetry than pre-industrial humans and less dimorphism in asymmetry. A mixture of influences from both genetic and behavioral factors is implicated as the source of these patterns.

Body proportions in ancient Andeans from high and low altitudes

Living human populations from high altitudes in the Andes exhibit relatively short limbs compared with neighboring groups from lower elevations as adaptations to cold climates characteristic of high-altitude environments. This study compares relative limb lengths and proportions in pre-Contact human skeletons from different altitudes to test whether ecogeographic variation also existed in Andean prehistory. Maximum lengths of the humerus, radius, femur, and tibia, and femoral head breadth are measured in sex-specific groups of adult human skeletons (N = 346) from the central (n = 80) and the south-central (n = 123) Andean coasts, the Atacama Desert at 2,500 m (n = 102), and the southern Peruvian highlands at 2,000-3,800 m (n = 41). To test whether limb lengths vary with altitude, comparisons are made of intralimb proportions, limb lengths against body mass estimates derived from published equations, limb lengths against the geometric mean of all measurements, and principal component analysis. Intralimb proportions do not statistically differ between coastal groups and those from the Atacama Desert, whereas intralimb proportions are significantly shorter in the Peruvian highland sample. Overall body size and limb lengths relative to body size vary along an altitudinal gradient, with larger individuals from coastal environments and smaller individuals with relatively longer limbs for their size from higher elevations. Ecogeographic variation in relation to climate explains the variation in intralimb proportions, and dietary variation may explain the altitudinal cline in body size and limb lengths relative to body size. The potential effects of gene flow on variation in body proportions in Andean prehistory are also explored.

Adaptive bone formation in acellular vertebrae of sea bass(Dicentrarchus labrax L.)

Mammalian bone is an active tissue in which osteoblasts and osteoclasts balance bone mass. This process of adaptive modelling and remodelling is probably regulated by strain-sensing osteocytes. Bone of advanced teleosts is acellular yet, despite the lack of osteocytes, it is capable of an adaptive response to physical stimuli. Strenuous exercise is known to induce lordosis. Lordosis is a ventrad curvature of the vertebral column, and the affected vertebrae show an increase in bone formation.

The effects of lordosis on the strain distribution in sea bass(Dicentrarchus labrax L.) vertebrae are assessed using finite element modelling. The response of the local tissue is analyzed spatially and ontogenetically in terms of bone volume.

Lordotic vertebrae show a significantly increased strain energy due to the increased load compared with normal vertebrae when loaded in compression. High strain regions are found in the vertebral centrum and parasagittal ridges. The increase in strain energy is attenuated by a change in architecture due to the increased bone formation. The increased bone formation is seen mainly at the articular surfaces of the vertebrae, although some extra bone is formed in the vertebral centrum.

Regions in which the highest strains are found do not spatially correlate with regions in which the most extensive bone apposition occurs in lordotic vertebrae of sea bass. Mammalian-like strain-regulated bone modelling is probably not the guiding mechanism in adaptive bone modelling of acellular sea bass vertebrae. Chondroidal ossification is found at the articular surfaces where it mediates a rapid adaptive response, potentially attenuating high stresses on the dorsal zygapophyses.