A droplet-based, composite PDMS/glass capillary microfluidic system for evaluating protein crystallization conditions by microbatch and vapor-diffusion methods with on-chip X-ray diffraction

A robust microfluidic device for the synthesis and crystal growth of organometallic polymers with highly organized structures

A simple and robust microfluidic device was developed to synthesize organometallic polymers with highly organized structures. The device is compatible with organic solvents. Reactants are loaded into pairs of reservoirs connected by a 15 cm long microchannel prefilled with solvents, thus allowing long-term counter diffusion for self-assembly of organometallic polymers. The process can be monitored, and the resulting crystalline polymers are harvested without damage. The device was used to synthesize three insoluble silver acetylides as single crystals of X-ray diffraction quality. Importantly, for the first time, the single-crystal structure of silver phenylacetylide was determined. The reported approach may have wide applications, such as crystallization of membrane proteins, synthesis and crystal growth of organic, inorganic, and polymeric coordination compounds, whose single crystals cannot be obtained using traditional methods.

A simple technique to reduce evaporation of crystallization droplets by using plate lids with apertures for adding liquids

A method is described for using plate lids to reduce evaporation in low-volume vapor-diffusion crystallization experiments. The plate lids contain apertures through which the protein and precipitants were added to different crystallization microplates (the reservoir was filled before fitting the lids). Plate lids were designed for each of these commonly used crystallization microplates. This system minimizes the dehydration of crystallization droplets containing just a few nanolitres of protein and precipitant, and results in more reproducible diffraction from the crystals. For each lid design, changes in the weight of the plates were used to deduce the rate of evaporation under different conditions of temperature, air movement, droplet size and precipitant. For comparison, the state of dehydration was also visually assessed throughout the experiment. Finally, X-ray diffraction methods were used to compare the diffraction of protein crystals that were conventionally prepared against those that were prepared on plates with plate lids. The measurements revealed that the plate lids reduced the rate of evaporation by 63-82%. Crystals grown in 5 nl drops that were set up with plate lids diffracted to higher resolution than similar crystals from drops that were set up without plate lids. The results demonstrate that plate lids can be instrumental for improving few-nanolitre crystallizations.

Shaken, and stirred: oscillatory segmented flow for controlled size-evolution of colloidal nanomaterials

We introduce oscillatory segmented flow as a compact microfluidic format that accommodates slow chemical reactions for the solution-phase processing of colloidal nanomaterials. The strategy allows the reaction progress to be monitored at a dynamic range of up to 80 decibels (i.e., residence times of up to one day, equivalent to 720-14,400 times the mixing time) from only one sensing location. A train of alternating gas bubbles and liquid reaction compartments (segmented flow) was initially formed, stopped and then subjected to a consistent back-and-forth motion. The oscillatory segmented flow was obtained by periodically manipulating the pressures at the device inlet and outlet via square wave signals generated by non-wetted solenoid valves. The readily implementable format significantly reduced the device footprint as compared with continuous segmented flow. We investigated mixing enhancement for varying liquid segment lengths, oscillation amplitudes and oscillation frequencies. The etching of gold nanorods served as a case study to illustrate the utility of the approach for dynamic characterization and precise control of colloidal nanomaterial size and shape for 5 h. Oscillatory segmented flows will be beneficial for a broad range of lab-on-a-chip applications that require long processing times.

Electrocoalescence based serial dilution of microfluidic droplets

Dilution of microfluidic droplets where the concentration of a reagent is incrementally varied is a key operation in drop-based biological analysis. Here, we present an electrocoalescence based dilution scheme for droplets based on merging between moving and parked drops. We study the effects of fluidic and electrical parameters on the dilution process. Highly consistent coalescence and fine resolution in dilution factor are achieved with an AC signal as low as 10 V even though the electrodes are separated from the fluidic channel by insulator. We find that the amount of material exchange between the droplets per coalescence event is high for low capillary number. We also observe different types of coalescence depending on the flow and electrical parameters and discuss their influence on the rate of dilution. Overall, we find the key parameter governing the rate of dilution is the duration of coalescence between the moving and parked drop. The proposed design is simple incorporating the channel electrodes in the same layer as that of the fluidic channels. Our approach allows on-demand and controlled dilution of droplets and is simple enough to be useful for assays that require serial dilutions. The approach can also be useful for applications where there is a need to replace or wash fluid from stored drops.

A droplet-based pH regulator in microfluidics

In this paper, we develop a strategy to form on-demand droplets with specific pH values. The pH control is based on electrolysis of water in microfluidics, and the produced hydrogen and hydroxyl ions are separated and confined in individual containers during the droplet generation, triggered by a pressure pulse. By tuning the applied voltages and pressure pulses, we can control on demand the pH value in a droplet.

Nanoliter-scale protein crystallization and screening with a microfluidic droplet robot

Large-scale screening of hundreds or even thousands of crystallization conditions while with low sample consumption is in urgent need, in current structural biology research. Here we describe a fully-automated droplet robot for nanoliter-scale crystallization screening that combines the advantages of both automated robotics technique for protein crystallization screening and the droplet-based microfluidic technique. A semi-contact dispensing method was developed to achieve flexible, programmable and reliable liquid-handling operations for nanoliter-scale protein crystallization experiments. We applied the droplet robot in large-scale screening of crystallization conditions of five soluble proteins and one membrane protein with 35–96 different crystallization conditions, study of volume effects on protein crystallization, and determination of phase diagrams of two proteins. The volume for each droplet reactor is only ca. 4–8 nL. The protein consumption significantly reduces 50–500 fold compared with current crystallization stations.

A microfluidic device for dry sample preservation in remote settings

This paper describes a microfluidic device for dry preservation of biological specimens at room temperature that incorporates chemical stabilization matrices. Long-term stabilization of samples is crucial for remote medical analysis, biosurveillance, and archiving, but the current paradigm for transporting remotely obtained samples relies on the costly "cold chain" to preserve analytes within biospecimens. We propose an alternative approach that involves the use of microfluidics to preserve samples in the dry state with stabilization matrices, developed by others, that are based on self-preservation chemistries found in nature. We describe a SlipChip-based device that allows minimally trained users to preserve samples with the three simple steps of placing a sample at an inlet, closing a lid, and slipping one layer of the device. The device fills automatically, and a pre-loaded desiccant dries the samples. Later, specimens can be rehydrated and recovered for analysis in a laboratory. This device is portable, compact, and self-contained, so it can be transported and operated by untrained users even in limited-resource settings. Features such as dead-end and sequential filling, combined with a "pumping lid" mechanism, enable precise quantification of the original sample's volume while avoiding overfilling. In addition, we demonstrated that the device can be integrated with a plasma filtration module, and we validated device operations and capabilities by testing the stability of purified RNA solutions. These features and the modularity of this platform (which facilitates integration and simplifies operation) would be applicable to other microfluidic devices beyond this application. We envision that as the field of stabilization matrices develops, microfluidic devices will be useful for cost-effectively facilitating remote analysis and biosurveillance while also opening new opportunities for diagnostics, drug development, and other medical fields.

An X-ray transparent microfluidic platform for screening of the phase behavior of lipidic mesophases

Lipidic mesophases are a class of highly ordered soft materials that form when certain lipids are mixed with water. Understanding the relationship between the composition and the microstructure of mesophases is necessary for fundamental studies of self-assembly in amphiphilic systems and for applications, such as the crystallization of membrane proteins. However, the laborious formulation protocol for highly viscous mesophases and the large amounts of material required for sample formulation are significant obstacles in such studies. Here we report a microfluidic platform that facilitates investigations of the phase behavior of mesophases by reducing sample consumption 300-fold, and automating and parallelizing sample formulation. The mesophases were formulated on-chip using less than 80 nL of material per sample and their microstructure was analyzed in situ using small-angle X-ray scattering (SAXS). The 220 μm-thick X-ray compatible platform was comprised of thin polydimethylsiloxane (PDMS) layers sandwiched between cyclic olefin copolymer (COC) sheets. Uniform mesophases were prepared using an active on-chip mixing strategy coupled with periodic cooling of the sample to reduce viscosity. We validated the platform by preparing and analyzing mesophases of the lipid monoolein (MO) mixed with aqueous solutions of different concentrations of β-octylglucoside (βOG), a detergent frequently used in membrane protein crystallization. Four samples were prepared in parallel on chip, by first metering and automatically diluting βOG to obtain detergent solutions of different concentration, then metering MO, and finally mixing by actuation of pneumatic valves. Integration of detergent dilution and subsequent mixing significantly reduced the number of manual steps needed for sample preparation. Three different types of mesophases typical for MO were successfully identified in SAXS data from on-chip samples. Microstructural parameters of identical samples formulated in different chips showed excellent agreement. Phase behavior of samples on-chip (~80 nL per sample) corresponded well with that of samples prepared via the traditional coupled-syringe method using at least two orders of magnitude more material ("off-chip", 35-40 μL per sample), further validating the applicability of the microfluidic platform for on-chip characterization of mesophase microstructure.

A microfluidic approach for protein structure determination at room temperature via on-chip anomalous diffraction

We report a microfluidic approach for de novo protein structure determination via crystallization screening and optimization, as well as on-chip X-ray diffraction data collection. The structure of phosphonoacetate hydrolase (PhnA) has been solved to 2.11 Åvia on-chip collection of anomalous data that has an order of magnitude lower mosaicity than what is typical for traditional structure determination methods.

Trapped liquid drop in a microchannel: multiple stable states

A liquid drop trapped in a microchannel, in which both contact angle (wettability) and opening angle (geometry) can vary with position, is investigated based on the minimization of free energy. The calculus of variation yields the Young-Laplace equation and its further integration leads to the general force balance. The equilibrium position of the trapped drop is determined by the balance between the area-mean capillary force and the area-mean hydrostatic pressure difference. Trapped liquid drops in truncated cones and hyperboloids are studied to elucidate our theory. As the volume of the drop trapped in the hydrophilic cones is increased, four regimes separated by three critical volumes are identified. The drop is either trapped at the narrow end or away from the cone top. The solution at the cone top satisfies the force balance by adjusting the upper contact angle, which is experimentally observed and verified by Surface Evolver (SE) simulations. Multiple stable states can exist in a particular regime. The hyperboloid tube in which the opening angle varies with position is also considered. As the gravitational strength is increased in hydrophilic hyperboloid, four regimes separated by three critical gravitational strengths are identified. The drop is either trapped near the neck or below the neck. Unlike hydrophilic cones, the drop stays near the neck of the hyperboloid due to varying opening angles. Multiple stable states are also observed. For both cone and hyperboloid, hydrophobic cases are studied as well and all theoretical solutions of the force balance agree well with SE simulation outcomes.

Small-angle X-ray scattering in droplet-based microfluidics

Small-angle X-ray scattering (SAXS) is a powerful technique to probe nanometer-scale structures; a particularly powerful implementation of SAXS is to apply it to continuously flowing liquid samples in microfluidic devices. This approach has been employed extensively, but virtually all existing studies rely on the use of one-phase microfluidics. We overcome this limitation and present the combination of SAXS with multiphase, droplet-based microfluidics to establish a platform methodology. We focus on the use of two different classes of microfluidic devices in two different approaches. In one approach, we use silicone elastomer devices to form water-in-oil emulsion droplets that contain gold nanoparticles as a model analyte. The emulsion droplets serve as nanoliter-scale compartments that are probed by SAXS off the microfluidic chip. In another approach, we both create and probe the droplets on the same microfluidic chip. In this case, we use a glass microcapillary device that serves to form gold nanoparticles in situ by mixing two aqueous precursor fluids within the drops. Both approaches allow the gold-nanoparticle scattering to be straightforwardly isolated from the raw data; subsequent fitting yields quantitative information on the size, shape, and concentration of the nanoparticles within the compartmentalizing emulsion droplets. In addition, the microfluidic flow parameters scale with the scattering cross-sections in a quantitative fashion. These results foreshadow the utility of this technique for other, more sophisticated tasks such as single-protein analysis or automated assaying.

Generation of monodispersed microdroplets by temperature controlled bubble condensation processes

This work introduces a microfluidic method for the generation of monodispersed microdroplets by using temperature controlled bubble condensation processes. In this method, the dispersed phase is first vaporized in the feeding pipe and ruptured to monodispersed bubbles in a coflowing stream. These bubbles are then condensed in the downstream pipe, where monodispersed microdroplets are obtained. This method ensures the narrow distribution of droplet diameters and prepares microdroplets less than 200 μm in sub-millimeter fluidic devices.

Droplet-based microfluidics

Droplet-based microfluidics or digital microfluidics is a subclass of microfluidic devices, wherein droplets are generated using active or passive methods. The active method for generation of droplets involves the use of an external factor such as an electric field for droplet generation. Two techniques that fall in this category are dielectrophoresis (DEP) and electrowetting on dielectric (EWOD). In passive methods, the droplet generation depends on the geometry and dimensions of the device. T-junction and flow focusing methods are examples of passive methods used for generation of droplets. In this chapter the methods used for droplet generation, mixing of contents of droplets, and the manipulation of droplets are described in brief. A review of the applications of digital microfluidics with emphasis on the last decade is presented.

Microfluidic synthesis of atto-liter scale double emulsions toward ultrafine hollow silica spheres with hierarchical pore networks

A facile PDMS-glass hybrid microfluidic device is developed for generating uniform submicrometer-scale double emulsion droplets with unprecedented simplicity and controllability. Compared with planar flow-focusing geometries, our three-dimensional flow-focusing geometry is advantageous for stably producing femto- to atto-liter droplets without the retraction problem of the dispersed phase fluid. In addition, this microfluidic platform can withstand the use of strong organic solvents (e.g. tetrahydrofuran (THF) and toluene) as a dispersed phase without deforming PDMS devices because the dispersed phase containing organic solvents does not directly contact the PDMS wall. In particular, monodisperse double emulsions are generated spontaneously via the internal phase separation of single emulsions driven by the diffusion of a co-solvent (tetrahydrofuran) in microfluidic devices. Finally, we demonstrated that the double emulsions can be used as morphological templates of ultrafine spherical silica capsules with controlled hierarchical pore networks via the evaporation-induced self-assembly (EISA) method. During EISA, triblock copolymers (Pluronic F127) act as a surfactant barrier separating the internal droplet from the continuous oil phase, resulting in the 'inverse' morphology (i.e. hydrophobic polymer-in-water-in-oil emulsions). Depending on the precursor composition and kinetic condition, various structural and morphological features, such as mesoporous hollow silica spheres with a single central core, multi-cores, or a combination of these with robust controllability can be seen. Electron microscopy (SEM, STEM, HR-TEM), small angle X-ray scattering (SAXS), and N(2) adsorption-desorption confirm the well-controlled hierarchical pore structure of the resulting particles.

Iterative operations on microdroplets and continuous monitoring of processes within them; determination of solubility diagrams of proteins

We demonstrate a technique for controlling the content of multiple microdroplets in time. We use this system to rapidly and quantiatively determine the solubility diagrams of two model proteins (lysozyme and ribonuclease A).

Microfluidic evaporator for on-chip sample concentration

We present a simple technique for the concentration of liquid samples in microfluidic devices applicable for single or multiple-phase configurations. The strategy consists of capturing the sample of interest within microfluidic traps and breaking its continuity by the introduction of a gas phase, which is also used to evaporate it.

X-ray diffraction of protein crystal grown in a nano-liter scale droplet in a microchannel and evaluation of its applicability

We describe the technical aspects of the in-situ X-ray diffraction of a protein crystal prepared by a nanodroplet-based crystallization method. We were able to obtain diffraction patterns from a crystal grown in a capillary without any manipulation. Especially in our experimental approach, the crystals that moved to the nanodroplet interface were fixed strongly enough to carry out X-ray diffraction measurements that could be attributed to the high surface tension of the nanodroplet. The crystal was damaged by an indirect action of the X-rays because our in-situ X-ray diffraction measurement was carried out in the liquid phase without freezing the crystal; however, the obtained several diffraction patterns were of sufficiently fine quality for the crystal structure factors to be generated. We consider the technical examination presented in this paper to represent a seamless coupling of crystallization to X-ray analysis.

Velocity distributions in a micromixer measured by NMR imaging

Velocity distributions (so-called propagators) with two-dimensional spatial resolution inside a chemical micromixer were measured by pulsed-field-gradient spin-echo (PGSE) nuclear magnetic resonance (NMR). A surface coil matching the volume of interest was built to enhance the signal-to-noise ratio. This enabled the acquisition of velocity maps with a very high spatial resolution of 29 μm × 39 μm. The measured propagators are compared with theoretical distributions and a good agreement is found. The results show that the propagator data provide much richer information about flow behaviour than conventional NMR velocity imaging and the information is essential for understanding the performance of a micromixer. It reveals, for example, deviations in the shape and size of the channel structures and multicomponent flow velocity distribution of overlapping channels. Propagator data efficiently compensate lost information caused by insufficient 3D resolution in conventional velocity imaging.

A method for generating single crystals that rely on internal fluid dynamics of microdroplets

The single crystallization method by focusing on the characteristic internal fluid dynamics of the microdroplets was explored. Also the theoretical background was discussed, and the droplet size for obtaining only a single crystal within a microdroplet was estimated.

Micro and nanotechnological tools for study of RNA

Micro and nanotechnologies have originally contributed to engineering, especially in electronics. These technologies enable fabrication and assembly of materials at micrometer and nanometer scales and the manipulation of nano-objects. The power of these technologies has now been exploited in analyzes of biologically relevant molecules. In this review, the use of micro and nanotechnological tools in RNA research is described.

Design and application of a microfluidic device for protein crystallization using an evaporation-based crystallization technique

A new crystallization system is described, which makes it possible to use an evaporation-based microfluidic crystallization technique for protein crystallization. The gas and water permeability of the used polydimethylsiloxane (PDMS) material enables evaporation of the protein solution in the microfluidic device. The rates of evaporation are controlled by the relative humidity conditions, which are adjusted in a precise and stable way by using saturated solutions of different reagents. The protein crystals could nucleate and grow under different relative humidity conditions. Using this method, crystal growth could be improved so that approximately 1 mm-sized lysozyme crystals were obtained more successfully than using standard methods. The largest lysozyme crystal obtained reached 1.57 mm in size. The disadvantage of the good gas permeability in PDMS microfluidic devices becomes an advantage for protein crystallization. The radius distributions of aggregrates in the solutions inside the described microfluidic devices were derived fromin situdynamic light scattering measurements. The experiments showed that the environment inside of the microfluidic device is more stable than that of conventional crystallization techniques. However, the morphological results showed that the protein crystals grown in the microfluidic device could lose their morphological stability. Air bubbles in microfluidic devices play an important role in the evaporation progress. A model was constructed to analyze the relationship of the rates of evaporation and the growth of air bubbles to the relative humidity.

Release of encapsulated content in microdroplets

A method for releasing the content of microdroplets by changing the channel wall wettability is proposed. The contents of aqueous droplets were released to the continuous phase by inverting 10-µm-sized W/O droplets into O/W ones in a 2-µm-deep hydrophilic channel. The combination of "encapsulation" and "release" in microdroplets facilitates micromixing and reaction.

Fabrication of advanced particles and particle-based materials assisted by droplet-based microfluidics

Recent advances in the fabrication of complex particles and particle-based materials assisted by droplet-based microfluidics are reviewed. Monodisperse particles with expected internal structures, morphologies, and sizes in the range of nanometers to hundreds of micrometers have received a good deal of attention in recent years. Due to the capability of generating monodisperse emulsions and of executing precise control and operations on the suspended droplets inside the microchannels, droplet-based microfluidic devices have become powerful tools for fabricating complex particles with desired properties. Emulsions and multiple-emulsions generated in the microfluidic devices can be composed of a variety of materials including aqueous solutions, gels, polymers and solutions containing functional nanoparticles. They are ideal microreactors or fine templates for synthesizing advanced particles, such as polymer particles, microcapsules, nanocrystals, and photonic crystal clusters or beads by further chemical or physical operations. These particles are promising materials that may be applicable for many fields, such as photonic materials, drug delivery systems, and bio-analysis. From simple to complex, from spherical to nonspherical, from polymerization and reaction crystallization to self-assembly, this review aims to help readers be aware of the many aspects of this field.

Push-pull perfusion sampling with segmented flow for high temporal and spatial resolution in vivo chemical monitoring

Low-flow push-pull perfusion is a sampling method that yields better spatial resolution than competitive methods like microdialysis. Because of the low flow rates used (50 nL/min), it is challenging to use this technique at high temporal resolution which requires methods of collecting, manipulating, and analyzing nanoliter samples. High temporal resolution also requires control of Taylor dispersion during sampling. To meet these challenges, push-pull perfusion was coupled with segmented flow to achieve in vivo sampling at 7 s temporal resolution at 50 nL/min flow rates. By further miniaturizing the probe inlet, sampling with 200 ms resolution at 30 nL/min (pull only) was demonstrated in vitro. Using this method, L-glutamate was monitored in the striatum of anesthetized rats. Up to 500 samples of 6 nL each were collected at 7 s intervals, segmented by an immiscible oil and stored in a capillary tube. The samples were assayed offline for L-glutamate at a rate of 15 samples/min by pumping them into a reagent addition tee fabricated from Teflon where reagents were added for a fluorescent enzyme assay. Fluorescence of the resulting plugs was monitored downstream. Microinjection of 70 mM potassium in physiological buffered saline evoked l-glutamate concentration transients that had an average maxima of 4.5 ± 1.1 μM (n = 6 animals, 3-4 injections each) and rise times of 22 ± 2 s. These results demonstrate that low-flow push-pull perfusion with segmented flow can be used for high temporal resolution chemical monitoring and in complex biological environments.

X-CHIP: an integrated platform for high-throughput protein crystallization and on-the-chip X-ray diffraction data collection

The X-CHIP (X-ray Crystallization High-throughput Integrated Platform) is a novel microchip that has been developed to combine multiple steps of the crystallographic pipeline from crystallization to diffraction data collection on a single device to streamline the entire process. The system has been designed for crystallization condition screening, visual crystal inspection, initial X-ray screening and data collection in a high-throughput fashion. X-ray diffraction data acquisition can be performed directly on-the-chip at room temperature using an in situ approach. The capabilities of the chip eliminate the necessity for manual crystal handling and cryoprotection of crystal samples, while allowing data collection from multiple crystals in the same drop. This technology would be especially beneficial for projects with large volumes of data, such as protein-complex studies and fragment-based screening. The platform employs hydrophilic and hydrophobic concentric ring surfaces on a miniature plate transparent to visible light and X-rays to create a well defined and stable microbatch crystallization environment. The results of crystallization and data-collection experiments demonstrate that high-quality well diffracting crystals can be grown and high-resolution diffraction data sets can be collected using this technology. Furthermore, the quality of a single-wavelength anomalous dispersion data set collected with the X-CHIP at room temperature was sufficient to generate interpretable electron-density maps. This technology is highly resource-efficient owing to the use of nanolitre-scale drop volumes. It does not require any modification for most in-house and synchrotron beamline systems and offers a promising opportunity for full automation of the X-ray structure-determination process.

Lessons from high-throughput protein crystallization screening: 10 years of practical experience

INTRODUCTION

X-ray crystallography provides the majority of our structural biological knowledge at a molecular level and, in terms of pharmaceutical design, is a valuable tool to accelerate discovery. It is the premier technique in the field, but its usefulness is significantly limited by the need to grow well-diffracting crystals. It is for this reason that high-throughput crystallization has become a key technology that has matured over the past 10 years through the field of structural genomics. Areas covered : The authors describe their experiences in high-throughput crystallization screening in the context of structural genomics and the general biomedical community. They focus on the lessons learnt from the operation of a high-throughput crystallization-screening laboratory, which to date has screened over 12,500 biological macromolecules. They also describe the approaches taken to maximize the success while minimizing the effort. Through this, the authors hope that the reader will gain an insight into the efficient design of a laboratory and protocols to accomplish high-throughput crystallization on a single-, multiuser laboratory or industrial scale. Expert opinion : High-throughput crystallization screening is readily available but, despite the power of the crystallographic technique, getting crystals is still not a solved problem. High-throughput approaches can help when used skillfully; however, they still require human input in the detailed analysis and interpretation of results to be more successful.

Microfluidics using spatially defined arrays of droplets in one, two, and three dimensions

Spatially defined arrays of droplets differ from bulk emulsions in that droplets in arrays can be indexed on the basis of one or more spatial variables to enable identification, monitoring, and addressability of individual droplets. Spatial indexing is critical in experiments with hundreds to millions of unique compartmentalized microscale processes--for example, in applications such as digital measurements of rare events in a large sample, high-throughput time-lapse studies of the contents of individual droplets, and controlled droplet-droplet interactions. This review describes approaches for spatially organizing and manipulating droplets in one-, two-, and three-dimensional structured arrays, including aspiration, laminar flow, droplet traps, the SlipChip, self-assembly, and optical or electrical fields. This review also presents techniques to analyze droplets in arrays and applications of spatially defined arrays, including time-lapse studies of chemical, enzymatic, and cellular processes, as well as further opportunities in chemical, biological, and engineering sciences, including perturbation/response experiments and personal and point-of-care diagnostics.